Hey guys I just bought this phone from newegg...
http://www.newegg.com/Product/Product.aspx?Item=N82E16875176292
Can I upgrade it to ICS?
ragingazn628 said:
Hey guys I just bought this phone from newegg...
http://www.newegg.com/Product/Product.aspx?Item=N82E16875176292
Can I upgrade it to ICS?
Click to expand...
Click to collapse
yes you can
wow! the overview of the youtube video chick is hot!
How come I go to update and it says no update???
ragingazn628 said:
How come I go to update and it says no update???
Click to expand...
Click to collapse
Where abouts do you live? It may not have been officially released in your area yet, or by your network provider yet.
themadba said:
Where abouts do you live? It may not have been officially released in your area yet, or by your network provider yet.
Click to expand...
Click to collapse
I live in the US I have Tmobile
do I need to root my phone before I can update with other methods?
http://forum.xda-developers.com/showthread.php?t=1544487
ragingazn628 said:
I live in the US I have Tmobile
Click to expand...
Click to collapse
So given this, you DO realize that if you did actually get the I9100, and you are on T-mobile USA, you will never get faster than Edge mobile data speeds... Right?
EDIT to add: before you ask (and I'm sure you would have), no, there is nothing you can do to fix this. The phone lacks the necessary antenna hardware to receive one of the frequencies T-mobile USA requires for high speed mobile data.
Also, I live in the US, and I'm on ATT, and I've NEVER been able to get Kies to update my phone. I've just used Odin to flash firmwares myself.
ragingazn628 said:
do I need to root my phone before I can update with other methods?
http://forum.xda-developers.com/showthread.php?t=1544487
Click to expand...
Click to collapse
No. Odin does not require root.
There u go...
Sent from my GT-I9100 using xda premium
ctomgee said:
So given this, you DO realize that if you did actually get the I9100, and you are on T-mobile USA, you will never get faster than Edge mobile data speeds... Right?
EDIT to add: before you ask (and I'm sure you would have), no, there is nothing you can do to fix this. The phone lacks the necessary antenna hardware to receive one of the frequencies T-mobile USA requires for high speed mobile data.
Also, I live in the US, and I'm on ATT, and I've NEVER been able to get Kies to update my phone. I've just used Odin to flash firmwares myself.
No. Odin does not require root.
Click to expand...
Click to collapse
Why am I getting this error
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP4_I9100XXLPS_I9100LUXLP1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
I'm on this step:
Click PDA and select *.tar.md5
ragingazn628 said:
I live in the US I have Tmobile
do I need to root my phone before I can update with other methods?
http://forum.xda-developers.com/showthread.php?t=1544487
Click to expand...
Click to collapse
GT-I9100s do not receive updates from Samsung for the US market as there are no US carriers that sell this model. AT&T sells the SGH-I777, TMobile USA sells the SGH-T989, Sprint sells the SPH-D710.
You can use odin to update official firmwares without root.
I'm trying to flash using this:
I9100XWLP4 Download (Thanks To SamMobile!)
Base Firmware: I9100XWLP4 (4.0.3)
Region Luxembourg (LUX)
Carrier: NA (Unbranded)
Build Date: 26th March 2012
Modem: XXLPS
CSC: LUXLP1
Change List: 299729
Kernel Version: 3.0.15
but when I select it in odin and press start it gives me :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP4_I9100XXLPS_I9100LUXLP1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
ragingazn628 said:
I'm trying to flash using this:
I9100XWLP4 Download (Thanks To SamMobile!)
Base Firmware: I9100XWLP4 (4.0.3)
Region Luxembourg (LUX)
Carrier: NA (Unbranded)
Build Date: 26th March 2012
Modem: XXLPS
CSC: LUXLP1
Change List: 299729
Kernel Version: 3.0.15
but when I select it in odin and press start it gives me :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP4_I9100XXLPS_I9100LUXLP1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Click to expand...
Click to collapse
Whoops, an errant thanks. Sorry about that. Have you tried re-downloading the package?
ctomgee said:
Whoops, an errant thanks. Sorry about that. Have you tried re-downloading the package?
Click to expand...
Click to collapse
Yes I have still same problem. Do I need drivers or something? I'm downloading Kies right now.
ragingazn628 said:
Yes I have still same problem. Do I need drivers or something? I'm downloading Kies right now.
Click to expand...
Click to collapse
Yes, you need drivers. But a question. In Odin, when you plug the phone in while on download mode, does the COM box light up yellow? If so, then you already had drivers. If not, then yes, install Kies for the drivers. But make sure Kies is not running at the same time Odin is. They don't play well together.
Also, make sure the usb cable is plugged into a main board port, and not a hub or keyboard pass through.
And maybe you don't care, but did you see what I said about getting slow mobile data speeds on T-mobile USA's network with this phone?
Yup installed kies and it worked
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLP4_I9100XXLPS_I9100LUXLP1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> factoryfs.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> param.lfs
<ID:0/004> Sbl.bin
<ID:0/004> zImage
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Glad you got it sorted out. But you never acknowledged the data speed on T-mobile USA issue and I've now told you about it 3 times... please don't post back here asking why your data speeds are really slow.
Just for reference. On T-Mobile, I had around 0.01-0.04 Mbps download and 0.01-0.03 Mbps upload compared to 4-6 Mbps download and 0.7-1.2 Mbps upload on AT&T. (Obviously edge speed vs hspa+)
I hope someone can give me advise if I can use ICS ROM that is currently available from other countries. My S2 phone is from middle east.
louisebb said:
I hope someone can give me advise if I can use ICS ROM that is currently available from other countries. My S2 phone is from middle east.
Click to expand...
Click to collapse
Yes
But you may need to change modem if connection problems and you either need a local CSC or enter network settings manually .
jje
JJEgan said:
Yes
But you may need to change modem if connection problems and you either need a local CSC or enter network settings manually .
jje
Click to expand...
Click to collapse
Which ROM is best? Can I flash europe ROM that carrier base?
Sent from my GT-N7000 using xda premium
Related
I did the mistake of attempting to install this pre rooted kernel: STOCKPLUS-GT-I9100-XXLPB-KERNEL-ROOTED through Odin.¨
I couldn't find a version that matched my kernel gingerbread.XXKL5 so I thought it would be okay to just install any kernel with the same android 2.3.6 version.
All I wanted was to root my phone, now my phone won't even boot. I think it's stuck on a bootloop ? It goes to the samsung warning triangle screen and stays there.
My phone doesn't seem to be able to enter recovery mode. However, it can enter download mode ..
I'm finding this whole rooting business slightly difficult. I'm in over my head. Please, assist me.
Kind regards,
Nate.
* UPDATE: Managed to reset my phone using the steps detailed by Ctomgee (my hero) I thought my phone was done for. Again, thanks everyone for the invaluable assistance you guys have provided! I even got back all my apps and data
ACHIEVEMENT UNLOCKED: Back from the dead.
Now I'm kind of scared to try but if anyone could explain exactly how to root the i9100G version I'd be much obliged ..
NateWnz said:
I did the mistake of attempting to install this pre rooted kernel: STOCKPLUS-GT-I9100-XXLPB-KERNEL-ROOTED through Odin.¨
I couldn't find a version that matched my kernel gingerbread.XXKL5 so I thought it would be okay to just install any kernel with the same android 2.3.6 version.
All I wanted was to root my phone, now my phone won't even boot. I think it's stuck on a bootloop ? It goes to the samsung warning triangle screen and stays there.
My phone doesn't seem to be able to enter recovery mode. However, it can enter download mode ..
I'm finding this whole rooting business slightly difficult. I'm in over my head. Please, assist me.
Kind regards,
Nate.
Click to expand...
Click to collapse
ACHIEVEMENT UNLOCKED: Softbrick your phone
A quick look at the Q&A stickies on the top would lead you to this thread
http://forum.xda-developers.com/showthread.php?t=1457458
NateWnz said:
I did the mistake of attempting to install this pre rooted kernel: STOCKPLUS-GT-I9100-XXLPB-KERNEL-ROOTED through Odin.¨
I couldn't find a version that matched my kernel gingerbread.XXKL5 so I thought it would be okay to just install any kernel with the same android 2.3.6 version.
Click to expand...
Click to collapse
Surely STOCKPLUS-GT-I9100-XXLPB-KERNEL would be 4.0.3. rather than 2.3.6?
If you're a noob, why ignore all the stickies and FAQ and jump straight for some random kernel?
I was reading a lot of posts via xda dev forum and someone linked to that kernel and I dunno what I was thinking. Apparently I wasn't thinking at all. SORRY. Now how do I fix this? =(
NateWnz said:
I reading a lot of posts via xda dev forum and someone link to that kernel and I dunno what I was thinking. Apparently I wasn't thinking at all. SORRY. Now how do I fix this? =(
Click to expand...
Click to collapse
1) calm down
2) I already replied to your problem
Reading it right now, thanks, however, the download link for the kernel file they're advising you to d/l seem to have expired? Which kernel should I use?
NateWnz said:
Reading it right now, thanks, however, the download link for the kernel file they're advising you to d/l seem to have expired? Which kernel should I use?
Click to expand...
Click to collapse
Please give me a link to the kernel file I should use to restore my phone =)
Before you make things worse, are you even sure you have an I9100? A quick search for XXKL5 revealed I9100G as more likely.
Stop waiting to be spoon fed and do some searching and reading.
NateWnz said:
Please give me a link to the kernel file I should use to restore my phone =)
Click to expand...
Click to collapse
You can try KL3 from Chainfire's CF-Root thread. Should work. Or just use Siyah or Speedmod, and be done with it.
oinkylicious is right... I didn't even think of that.
I attempted to do steps 1-4 in http://forum.xda-developers.com/showthread.php?t=1457458
.. However, After checking the box the phone came in I can conclude that the phone is indeed a GT-9100G. It never occurred to me that there are indeed different SIIs
NateWnz said:
I attempted to do steps 1-4 in http://forum.xda-developers.com/showthread.php?t=1457458
.. However, After checking the box the phone came in I can conclude that the phone is indeed a GT-9100G. It never occurred to me that there are indeed different SIIs
Click to expand...
Click to collapse
This is what I got after attempting to flash the recovery pack.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also I should note that I now don't get the normal download screen but a different screen with an icon of a cell phone and a computer connected by four dots and a small triangle. However odin still seem to recognized my cell. Is my phone completely broken now? =(
I really appreciate your assistance guys. And if I ever recover this phone I vow not to do stupid uninformed mistakes like this ever again
NateWnz said:
I attempted to do steps 1-4 in http://forum.xda-developers.com/showthread.php?t=1457458
.. However, After checking the box the phone came in I can conclude that the phone is indeed a GT-9100G. It never occurred to me that there are indeed different SIIs
Click to expand...
Click to collapse
Yup. There are MANY different SII's... Most have completely different model numbers. GT-I9100 and GT-I9100G are similar, but have different chipsets, so are not compatible for firmwares. Take very good care you only flash things meant for the I9100G.
---------- Post added at 05:39 PM ---------- Previous post was at 05:36 PM ----------
NateWnz said:
This is what I got after attempting to flash the recovery pack.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9100XXKI3_CL577579_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9100XXKI3_REV_02_CL1062028.tar.md5 is valid.
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also I should note that I now don't get the normal download screen but a different screen with an icon of a cell phone and a computer connected by four dots and a small triangle. However odin still seem to recognized my cell. Is my phone completely broken now? =(
I really appreciate your assistance guys. And if I ever recover this phone I vow not to do stupid uninformed mistakes like this ever again
Click to expand...
Click to collapse
That is forced download mode. Means you have to flash something to get it working again.
As long as you can get to download mode, it's not hopeless.
Try this.
Thanks! Just completet step 2. Repartition with Odin successfully!
Waiting 30 mins due to d/l limit on mirror site but then I will download firmware from http://www.sammobile.com/firmware/ and proceed with step 3. Should I just get the European one?
NateWnz said:
Thanks! Just completet step 2. Repartition with Odin successfully!
Waiting 30 mins due to d/l limit on mirror site but then I will download firmware from http://www.sammobile.com/firmware/ and proceed with step 3. Should I just get the European one?
Click to expand...
Click to collapse
I've got no experience with this. I found it with a search. I have a non-G model. Just make sure you use a G firmware.
Sent from my GT-I9100 using XDA App
you may download stock rom suitable to ur s2 and download it to ur s2 via odin. which file then? you need to know ur PDA number.
Sent from my GT-I9100 using Tapatalk
sudonto said:
you may download stock rom suitable to ur s2 and download it to ur s2 via odin. which file then? you need to know ur PDA number.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I can only find firmwares from China, Malaysia and india from the aforementioned link .. anyone found any european, british or american ones?
I9100GDZKJ2 ## 2011 October I9100GOLCKJ2 Malaysia Download
I9100GXWKJ2 ## 2011 November I9100GODDKJ2 India Download
I9100GDZKL3 ## 2.3.6 2011 December I9100GOLCKL3 Malaysia Download
I experienced it last weekend. Bricked!
Having the same issue mistaken I9100G for I9100 and flashed Kernel based on I9100. Initially hanged at the Samsung logo with Yellow Triangle when reboot the phone it shows Phone---Exclamation----PC.
Searched and tried almost everything except sending to MobileTech.
After days of trying I resend it back to Samsung Service Centre claiming got the Logo after updating new FW from Kies.
With no questions asked from Service Centre, they restored my phone the next day.
I would advice you to send it back to service centre if you run outta options.
NateWnz said:
I can only find firmwares from China, Malaysia and india from the aforementioned link .. anyone found any european, british or american ones?
I9100GDZKJ2 ## 2011 October I9100GOLCKJ2 Malaysia Download
I9100GXWKJ2 ## 2011 November I9100GODDKJ2 India Download
I9100GDZKL3 ## 2.3.6 2011 December I9100GOLCKL3 Malaysia Download
Click to expand...
Click to collapse
Probably not... The G variant was only sold in those regions you're finding, as far as I know. Just use the I9100GOLCKL3 Malaysia one, it looks like the latest one. They'll all have english.
Sent from my GT-I9100 using XDA App
ctomgee said:
Probably not... The G variant was only sold in those regions you're finding, as far as I know. Just use the I9100GOLCKL3 Malaysia one, it looks like the latest one. They'll all have english.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Strange, since I purchased it from a swedish online retailer. But thanks will try the Malaysia firmware.
NateWnz said:
Strange, since I purchased it from a swedish online retailer. But thanks will try the Malaysia firmware.
Click to expand...
Click to collapse
I actually feel slightly cheated since the product advertised is clearly the S2 with dual core see
http://www.bazula.se/Samsung-Galaxy/Samsung-Galaxy---mobiler/Samsung-Galaxy-S-II-i9100.htm
Read " Dual Core Processor på 1,2 Ghz "
According to my knowledge, the i9100G is actually limited to single core and is clocked at 1Ghz ?
Dear Friends
I tried to upload new Rom to my Samsung Galaxy S2 but it field and now even I can't get download mode only what I get is picture of (device---Attention---PC),
could you help me to get download mode again?
...
MistahBungle said:
That is download mode. Forced download mode. It's forcing you to flash something to get it going again. Flash a stock rom in Odin.
Click to expand...
Click to collapse
Thanks Man to reply, could you help me to official Rom to download it please?
...
The link below is a thread containing instructions on how to flash a stock firmware and also a list of the stock firmwares that are available.
http://forum.xda-developers.com/showthread.php?t=1075278
Sent from my GT-I9100 using Tapatalk 2
MistahBungle said:
Here or Samfirmware. Or even the PC version of Checkfus. I'd try the first two places initially.
Click to expand...
Click to collapse
Thanks Man,
I will do my best...
...
MistahBungle said:
No probs. Follow the flashing instructions in the thread that Nicholas1520 linked to. Any issues, post here. But have a go at it yourself first. You'll learn plenty going thru this
Click to expand...
Click to collapse
OK thanks boys,
I'm going throw it carefully and I will post anything later
MistahBungle said:
No probs. Follow the flashing instructions in the thread that Nicholas1520 linked to. Any issues, post here. But have a go at it yourself first. You'll learn plenty going thru this
Click to expand...
Click to collapse
Dear Friends,
I downloaded two of these Roms, and I can see the device downloadable in Odin3 and I selected in PDA then I pressed start, the software (Odin3) start to upload till I got Fail...
see this codes:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_ITV_I9100XWLPF_I9100OXILP6_I9100XXLPX.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try using Odin 1.85:
http://db.tt/XSY1G5Ye
You should try another firmware and see of that's the case because your doing everything good so far.
Sent from my GT-I9100 using Tapatalk 2
nicholas1520 said:
Try using Odin 1.85:
http://db.tt/XSY1G5Ye
You should try another firmware and see of that's the case because your doing everything good so far.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Ok I will do my best with it,,, I will inform you later,,,
...
MistahBungle said:
Also, after you open Odin & before you start flashing, make sure you check Windoze Task Manager & close Kies/any associated processes if they're running.
And...Do you definitely have an I9100 or I9100T ? Check the sticker on the phone chassis under the battery to be doubly sure if you need to.
Click to expand...
Click to collapse
Ok, I'm already Using v.1.85 and I tried again by using different USB cable, my Device is I9100G, I did start again and its freezing now see this :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_ITV_I9100XWLPF_I9100OXILP6_I9100XXLPX.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
...
MistahBungle said:
OK. There's your problem right there. You have an I9100G. I think you'll find you tried to flash a rom for the I9100/T which caused it to get into a state where it won't boot/forced download mode.
You need to download & flash an I9100G stock rom. I don't have any experience with the I9100G (apart from seeing posts on here from people who have them), but look in this thread (I don't know which one you should use tho).
Edit - And be careful in future, only flash roms/kernels specifically for the I9100G
Click to expand...
Click to collapse
OK, I will check it carefully.... Thanks for your support...
alisaher2000 said:
OK, I will check it carefully.... Thanks for your support...
Click to expand...
Click to collapse
Dear Friends,
I solved it by applying uploading Rom for I9100G via Odin3 v.1.85... Thanks for all supports....
:good:
...
Dear Friends
I HAVE MESS-UP WITH MY i9300!!!!
The incident is I was using custom rom, and installed some stupid app called "Adblock" or something,
and then, my phone just keep went-off for about 8-10 times a day. So then, I decided to reflash
custom rom by CWM, and after I pressed install in Aroma Installer, it just kick me out all of sudden, and
then, I couldn't get back to CWM anymore, so I decided to flash some stock rom by odin, but what
had happen was it starts until "Nand write start" and stacked for a while, and then just FAIL me.
On the net, I found that Checkrom Resurrection V4 could rescue softbrick i9300, I tried, but
no luck either. Finally, just now, I tried a 3 files stock rom with pit, and it came out as:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md 5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noshi p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
What I have done:
1. reflash custom rom by CWM
2. 3 wipes - (but I am no longer to get back to CWM)
3. flash stock rom - hong kong combo firmware @ Samfirmware - by Odin
4. flash Checkrom Resurrection V4 by Odin
5. flash stock rom - 3 files firmware + pit - by Odin
6. changed usb port
7. changed PC
8. uninstall all applications relative to Kies
have you guys got any idea what can I do? I am thinking to mess-up the phone even badly (till it couldn't switch on), so that I can take it to Samsung Service Center for warranty replacement, but have you got ANY method I can do that to mess it up? Or anything I can over-come from the soft (or hard) brick. PLEASE Give me some help guys. I am very struggle.
Wrong thread.. Needs to be in Q&A
Try a fully stock rom with Odin 1.85
Sent from my GT-I9300 using xda app-developers app
Kingybear said:
Try a fully stock rom with Odin 1.85
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks Mate, but no luck
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
NatTheCat said:
Wrong thread.. Needs to be in Q&A[/QUOT
I put it on Q&A already, but just wanted to have more people can help, so I put it on here. sorry for any disturb.
Click to expand...
Click to collapse
The fact that you want more people helping you doesnt mean that you can do what you want, wrong section.
By the way, it seems that your s3 is bricked pal.
Sent from my GT-I9300 using Tapatalk
anyone can tell me how to delete the thread? Thanks
aguerito said:
The fact that you want more people helping you doesnt mean that you can do what you want, wrong section.
By the way, it seems that your s3 is bricked pal.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
show the poor guy some love dude, your comments are abrasive he only wants help for his expensive phone sheesh
---------- Post added at 10:03 AM ---------- Previous post was at 09:59 AM ----------
I wouldnt panic yet they say its very hard to brick an S3?
check around and see what you can find out
kk12175 said:
Thanks Mate, but no luck
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Set PIT file..
<ID:0/009> DO NOT TURN OFF TARGET!!
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I think it's rom problems dude... I never encounter any problems for adblock app... Which rom did u flashed
Sent from my GT-I9300 using xda premium
jothi2lingam said:
I think it's rom problems dude... I never encounter any problems for adblock app... Which rom did u flashed
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
i was using Omega since v.9 until v33.2 at the last minute. and I found a video in youtube to resurrect my s3 by flashing Checkrom v4:
http://www.youtube.com/watch?v=ZNaQfdOi56E
tried it as well, but it seems doesn't work as it kept rebooting / hanging at the Galaxy S3 logo. And I tried to flashed some stock rom (combo file) from Samfirmware, no luck neither. Tried to flash some stock rom (3 files + pit) HK base rom. Same happened. Fail after Nand Write Start.:silly:
and now, couldn't get into CWM neither.
jothi2lingam said:
I think it's rom problems dude... I never encounter any problems for adblock app... Which rom did u flashed
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Been using adblock for a while myself and never had a hiccup .. excellent app..
Probably mother board died. Same problem with my sister S3. Take to Samsung and use the warranty. :banghead:
Sent from my GT-I9300 using xda premium
johnkhor123 said:
Probably mother board died. Same problem with my sister S3. Take to Samsung and use the warranty. :banghead:
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I had flashed custom rom before, do you think I can still use the warranty? If yes, definitely going.
kk12175 said:
Dear Friends
I HAVE MESS-UP WITH MY i9300!!!!
The incident is I was using custom rom, and installed some stupid app called "Adblock" or something,
and then, my phone just keep went-off for about 8-10 times a day. So then, I decided to reflash
custom rom by CWM, and after I pressed install in Aroma Installer, it just kick me out all of sudden, and
then, I couldn't get back to CWM anymore, so I decided to flash some stock rom by odin, but what
had happen was it starts until "Nand write start" and stacked for a while, and then just FAIL me.
On the net, I found that Checkrom Resurrection V4 could rescue softbrick i9300, I tried, but
no luck either. Finally, just now, I tried a 3 files stock rom with pit, and it came out as:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9300XXALE8_554452_REV00_user_low_ship.tar.md 5 is valid.
<OSM> MODEM_I9300XXLE8_REV02_REV04_CL1145430.tar.md5 is valid.
<OSM> CSC_OJV_I9300OJVALE7_CL547448_REV00_user_low_noshi p.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
What I have done:
1. reflash custom rom by CWM
2. 3 wipes - (but I am no longer to get back to CWM)
3. flash stock rom - hong kong combo firmware @ Samfirmware - by Odin
4. flash Checkrom Resurrection V4 by Odin
5. flash stock rom - 3 files firmware + pit - by Odin
6. changed usb port
7. changed PC
8. uninstall all applications relative to Kies
have you guys got any idea what can I do? I am thinking to mess-up the phone even badly (till it couldn't switch on), so that I can take it to Samsung Service Center for warranty replacement, but have you got ANY method I can do that to mess it up? Or anything I can over-come from the soft (or hard) brick. PLEASE Give me some help guys. I am very struggle.
Click to expand...
Click to collapse
Try TURN OFF antivirus, update Kies, Try on other OS.
Because I had the same problem with own S3.
Windows 8, AVG IS 2013, Odin 3.07,3.04.
Everytime after few second Odin stop working and show FAIL "Complete(Write) operation failed."
But on Windows 7, updated Kies to 2.5, turned off AVG, Odin 3.07, fresh downloaded rom ELK4, Galaxy S3 slowly but finished NAND write
and now I am happy againg
johnkhor123 said:
Probably mother board died. Same problem with my sister S3. Take to Samsung and use the warranty. :banghead:
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Ya i think so,,Same incident for previously after flashed one of the rom from this thread i went to sleep..The phone was reboot itself (stuck in bootloop) till i found at morning, my phone fuc**ing hot stucked in Samsung Galaxy SIII. After tried flashed using odin & using cwm not worked because my phone keep on rebooting. Once send to sammy centre i said that i put in charge, once wakeup in morning my phone keep on rebooting & so hot. So after one week they replace me new board for my s3 even they can see my cwm. I tried to delete cwm but cant. Thank god atlast they replace my s3. so only way is send to samsung centre. I face exactly same issue previously as you facing now
KKTHX said:
Try TURN OFF antivirus, update Kies, Try on other OS.
Because I had the same problem with own S3.
Windows 8, AVG IS 2013, Odin 3.07,3.04.
Everytime after few second Odin stop working and show FAIL "Complete(Write) operation failed."
But on Windows 7, updated Kies to 2.5, turned off AVG, Odin 3.07, fresh downloaded rom ELK4, Galaxy S3 slowly but finished NAND write
and now I am happy againg
Click to expand...
Click to collapse
sounds good. give it a try .. thanks MATE
kk12175 said:
anyone can tell me how to delete the thread? Thanks
Click to expand...
Click to collapse
Thread closed.
ok guys realy stuck on this been trying everthing
keep getting:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md 5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.ta r.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
and i have tryed Kies recovery as well
please any help would be greatfull guys
Could you please let me know if you have solved this problem and how?
Buddhainuk said:
ok guys realy stuck on this been trying everthing
keep getting:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXDLJ4_368423_REV00_user_low_ship.tar.md 5 is valid.
<OSM> MODEM_I9300XXDLID_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_BTU_I9300OXADLJ4_368423_MULTI_user_low_ship.ta r.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
and i have tryed Kies recovery as well
please any help would be greatfull guys
Click to expand...
Click to collapse
Could this be caused by a locked bootloader? Are you using an international s3?
Sent from my GT-I9300 using xda premium
Phantogenic said:
Could this be caused by a locked bootloader? Are you using an international s3?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
The gs3 does NOT have a locked bootloader. The OP has to tell us wat he wants to do. And Nand write fail most probably means the nand memory is destroyed and needs new motherboard.
Sent from my GT-I9300 using xda app-developers app
Because I have the international version I wasnt sure if some versions of the s3 not necessarily the gti9300 were all unlocked. I had read somewhere people were having issues with a possible locked bootloader hence the question.
Sent from my GT-I9300 using xda premium
Phantogenic said:
Because I have the international version I wasnt sure if some versions of the s3 not necessarily the gti9300 were all unlocked. I had read somewhere people were having issues with a possible locked bootloader hence the question.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Only verizon gs3 have locked bootloaders I think. The international one do not have a locked bootloader.
Sent from my GT-I9300 using xda app-developers app
He didnt say what type of s3 he had. We'd need more info.
Sent from my GT-I9300 using xda premium
Phantogenic said:
He didnt say what type of s3 he had. We'd need more info.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
He did in two ways.
(1) The forum
(2) The log
Sent from my GT-I9300 using xda app-developers app
JellyYogurt said:
He did in two ways.
(1) The forum
(2) The log
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I'm sorry, I'm not usually one for having a go or derailing a thread... but...
1. The OP has not explained his type of phone. It could be from anywhere. Have a different model code or anything. Korean? American? Canadian? Singapore?
2. The log doesn't say what type of phone he has, merely that he is trying to install that particular rom to it, for all we know it could be the wrong rom.
So to the OP what is your exact Model Number. Where are you from? Are you sure the rom you are installing is the correct one for your phone?
Are you just connecting the phone? or are you in download mode?
Phantogenic said:
I'm sorry, I'm not usually one for having a go or derailing a thread... but...
1. The OP has not explained his type of phone. It could be from anywhere. Have a different model code or anything. Korean? American? Canadian? Singapore?
2. The log doesn't say what type of phone he has, merely that he is trying to install that particular rom to it, for all we know it could be the wrong rom.
So to the OP what is your exact Model Number. Where are you from? Are you sure the rom you are installing is the correct one for your phone?
Are you just connecting the phone? or are you in download mode?
Click to expand...
Click to collapse
If he is smart and flashes the correct rom and is on the correct forum, his phone shld be Gt-i9300, the international model.
Sent from my GT-I9300 using xda app-developers app
You guys realise the OP was made in December 2012? The second poster resurrected a dead post seeking a non-existent solution. The OP's phone has probably been landfill for over a year now.
Sent from my GT-I9300 using Tapatalk
JellyYogurt said:
If he is smart and flashes the correct rom and is on the correct forum, his phone shld be Gt-i9300, the international model.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hahaha brilliant!
Sent from my GT-I9300 using xda premium
Well I decided to go completely back to stock and update through Verizon's OTA's until I get 4.1.2 before I try the minitab rom again. Well I odin'd back with no issues, got the first OTA installed and it worked fine. Got the newest one and it seemed to install just fine, but when I tried to boot it up it was bootlooping on the note ii logo. Pretty much try to boot up for maybe half a second and then start over. I tried to Odin back to stock again but it's failing on the boot.img. I am really hoping that installing the newest OTA didn't corrupt it but that's the way it seems, I am trying to dl the full restore without keeping the bootloader unlocked and see if that works. Thing that pisses me off is I have flashed probably fifty roms through all my phones yet never once bricked. Now the first time I take an OTA I have a $600 paperweight.
Well I tried the full restore in Imnuts' thread and it's still failing at boot.img so I am guessing I am screwed. Now the question is will Verizon send me a new one under warranty since it was something from them that caused it. Odin just shows this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW_Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
dmonger11b said:
Well I tried the full restore in Imnuts' thread and it's still failing at boot.img so I am guessing I am screwed. Now the question is will Verizon send me a new one under warranty since it was something from them that caused it. Odin just shows this:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW_Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=2280680
Sent from my SCH-I605 using XDA Premium HD app
dmonger11b said:
Well I decided to go completely back to stock and update through Verizon's OTA's until I get 4.1.2 before I try the minitab rom again. Well I odin'd back with no issues, got the first OTA installed and it worked fine. Got the newest one and it seemed to install just fine, but when I tried to boot it up it was bootlooping on the note ii logo. Pretty much try to boot up for maybe half a second and then start over. I tried to Odin back to stock again but it's failing on the boot.img. I am really hoping that installing the newest OTA didn't corrupt it but that's the way it seems, I am trying to dl the full restore without keeping the bootloader unlocked and see if that works. Thing that pisses me off is I have flashed probably fifty roms through all my phones yet never once bricked. Now the first time I take an OTA I have a $600 paperweight.
Click to expand...
Click to collapse
It's been a while since I've done any troubleshooting, but checkout this thread by Adam Outler called "DON'T ACCEPT OTA UPDATES" in the Verizon Galaxy Note II General section. I'm aware that you aren't experiencing this specific problem, but it's possible that it may fix your boot loop problem.
If you happen to get your phone back up and running, I'd suggest checking out the Verizon Galaxy Note II Android Development section, because there are a couple of flashable stock 4.1.2 ROMs available. There're basically the OTA 4.1.2, but modified so that users with unlocked bootloaders can flash it as though they are accepting the OTA 4.1.2 without loosing root and their unlocked bootloaders.
larry_thagr81 said:
It's been a while since I've done any troubleshooting, but checkout this thread by Adam Outler called "DON'T ACCEPT OTA UPDATES" in the Verizon Galaxy Note II General section. I'm aware that you aren't experiencing this specific problem, but it's possible that it may fix your boot loop problem.
If you happen to get your phone back up and running, I'd suggest checking out the Verizon Galaxy Note II Android Development section, because there are a couple of flashable stock 4.1.2 ROMs available. There're basically the OTA 4.1.2, but modified so that users with unlocked bootloaders can flash it as though they are accepting the OTA 4.1.2 without loosing root and their unlocked bootloaders.
Click to expand...
Click to collapse
Awesome thank you. Worked perfectly. I feel kinda embarrassed I didn't look in Adam's thread. But the issue was caused by something a little different than what he warned against. Either way phone booted back up. Definitely irritated I didn't look better,
Glad I could point you in the right direction.