✰✰✰✰✰[KERNEL] DarkKnight v2.0 - THE END - (01/08)✰✰✰✰✰
DarkKnight KERNEL
Features:
Samsung ROM + MIUI + AOSP
JellyBean Support
Auto - Root
DM CWM Touch Recovery
Multiboot - Upto 6 ROM's
Kernel Updated to 3.0.36
XZ Kernel Compression
SLQB Memory Allocator
Boot Animation Support - [ /data/local & /system/media ]
CPU Freq Governors: lulzactive, ondemand, performance, powersave, smartassv2(default), userspace, pegasuq, conservative
I/O Schedulers: BFQ, CFQ, Deadline, SIO(default), No-op, V(R)
Undervolting already done
GPU Clock & Voltage Control
Charging Current Control
Touch Screen Sensitivity Fix
Increase TouchScreen Sensitivity
Fix fuel alert wakelocks
Frequency regulation based on screen on/off events
Add global min&max_suspend frequency variables
SpeedMod Color Profiles
Disable secondary cpu auto-hotplug when screen is off
Tegrak Second Core App Support
Smooth Scaling Interface
Improve CPU0 turnoff protection logic
Speedmod Sharpness Fix
Allow CPU-supported unaligned accesses
Brightness Curve MOD
Use ADB as root
Using OnDemand+Noop in Recovery for faster backup/restore
ARM Topology + Sched MC
Updated Mali Drivers
Joe's RCU
Kernel_HZ = 500HZ for smoothness
Toggle MDNIE Negative Effect with Home Button
Cleaner DMESG
Decreased LCD PowerOn delay
Lower Brightness for Low Light Conditions\
BootProgress Bar
Manual Method for Auto Brightness and Compass for AOSP Rom's - Refer steps below.
[*]Adjustable & Configurable Vibrator Interface
[*]Updated MMC Drivers with MMC_CAP_ERASE disabled
[*]BLN - Static
[*]Better Brightness & Gamma
[*]Updated Wifi Drivers
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Changelog for v2.0:
Added JellyBean Support
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Downloads:
Click to expand...
Click to collapse
2.0 CWM Zip
2.0 Odin Tar
Click to expand...
Click to collapse
How To Use Multiboot:
With v1.6 of DM Kernel for ICS, I introduce multiboot feature.
It is similar to the nandroid backup and restore function, but with a new menu and everything is done automatically
The menu is as follows:
Activate ROM
Backup ROM
Delete ROM
Inside each of this option we have 6 ROMs.
The steps to use Multiboot are as follows:
Install any ROM via the Install via Zip option. (Flash DM Kernel v1.9+)
Backup your ROM at any position as per your wish.
Install another ROM again via the Install via Zip option. (again flash DMv1.9+ and Up)
Backup that ROM at any position as per your wish.
Switch between ROM's using the Activate ROM option ( Backup your ROM each time before switching to another ROM)
Also I will try and automate more features.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
How To Switch Between Auto Brightness and Compass on AOSP ROM's:
Thanks to myfluxi, we now have support for Auto Brightness and Compass Mode on AOSP Rom's similar to xxfluxi kernel.
Steps to follow:
1) Download the Sensors.zip file from attachments.
2) Extract the files on sdcard.
3) If you want to have Auto-Brightness, then rename sensors.exynos4.so.os to sensors.exynos4.so
4) If you want to have Compass, then rename sensors.exynos4.so.prop to sensors.exynos4.so
5) Remember, you cannot have both
6) Copy that sensors.exynos4.so file to /system/lib/hw/ and reboot your phone.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Donations:
Hall of Fame
Juan Antonio Vermejo
Michael Foo
Brian Huijts
Yim Cheuk On
Marco Bouma
rkoby13
Click to expand...
Click to collapse
Click to expand...
Click to collapse
If you like my work, support it, please donate. I spend many hours behind developing and testing
and deep sleep lag here?
ionutz727 said:
and deep sleep lag here?
Click to expand...
Click to collapse
Works fine without any problems for me...With over 4000 downloads for the previous versions
Try and let me know
good kernel...
Going to try this! And hopefully using it on the next checkrom
ionutz727 said:
and deep sleep lag here?
Click to expand...
Click to collapse
Every kernel has deep sleep lag. Its just how it works I believe :-/.
Sent from my GT-I9100 using xda premium
awesome Kernel
how is the battery?
Cangir said:
how is the battery?
Click to expand...
Click to collapse
I'd like to know this too.
okay i have an issue here
im on RGUI MIUI (latest) i can't switch my keyboard language, and i can't switch to another keyboard.
i wiped cache and dlvk, i used cleaning script, i even reflashed the ROM.
i switched back to Siyah and everything went back normally.
i hope we can see a fix because i really love your work m8
OuT.Law said:
okay i have an issue here
im on RGUI MIUI (latest) i can't switch my keyboard language, and i can't switch to another keyboard.
i wiped cache and dlvk, i used cleaning script, i even reflashed the ROM.
i switched back to Siyah and everything went back normally.
i hope we can see a fix because i really love your work m8
Click to expand...
Click to collapse
a kernel surely cant bork your keyboard...
sakindia123 said:
a kernel surely cant bork your keyboard...
Click to expand...
Click to collapse
Exactly what i was thinking
Sent from my GT-I9100 using Tapatalk 2
So far so good.
I always liked your old Darkknight kernels on GB/CheckROM
Thanks keep up the good work.
so,now it work even on cm9/aokp rom's?
Finally this kernel for my AOKPs!
Well done mate
Still waiting for your building tuts
vivmar said:
so,now it work even on cm9/aokp rom's?
Click to expand...
Click to collapse
Yes
M90 said:
Finally this kernel for my AOKPs!
Well dona mate
Still waiting for your building tuts
Click to expand...
Click to collapse
TY
Sent from my GT-I9100 using Tapatalk 2
flashing on stock LPF
Like SIO @ def
After 4 hour No issues. Fast and stable with smartass V2 200 - 1000
is possible to ad in the custom recovery something to change Scaling and Scheduler without using 3rd party app?
wifi problems
Just flashed it on the Foxhound LPF and first thing I can report are the wifi issues.
It is not connecting to my wireless router WRT320N. It is connecting to an Asus 520WL.
Tried it several times, including re-entering the key, but wont connect to it. It doesnt reports any error, it just says Saved and nothing else happens.
Well, thats what happened, using siyah with miui I get no issues, but switching to DK my keyboard acts funny.
Thanks anyway m8
Sent from my GT-I9100 using XDA
spookyx said:
Just flashed it on the Foxhound LPF and first thing I can report are the wifi issues.
It is not connecting to my wireless router WRT320N. It is connecting to an Asus 520WL.
Tried it several times, including re-entering the key, but wont connect to it. It doesnt reports any error, it just says Saved and nothing else happens.
Click to expand...
Click to collapse
Yes a fix is coming...today night or max latest tomorrow
Sent from my GT-I9100 using Tapatalk 2
Related
Neok UltimateS Kernel v3.9Ti
2.6.38.8, 128-1190, CFS, NOOP/CFQ/BFQv2/SIO/VR, SWAP, SLAB, HAVS, AXI, HW3D kernel included (base on Tiamat 4.0.6)
my Kernel changeset (compare Tiamat4.0.6)
- Amazing Smooth working
- Add SIO IO Scheduler
- Add VR IO Scheduler
- Change kernel optimization flags
- Compiled by 2011.10 Linaro GCC4.5.4 with -O2 and other optimization flags
- CFS Tweak (SCHED_FEAT(GENTLE_FAIR_SLEEPERS, 0))
- Applied Preempt TinyRCU & RCU Booster
- Applied RCU Optimization
- Applied RCU FAST NO HZ
- Added InteractiveX cpu governor
- Default IO Scheduler set to noop
- Config.hz 500HZ
- Improve battery efficiency
- Improve battery AVS Code (source by Intersect-Raven)
- support call record (source by cm7)
- WIFI Driver change to pershoot's kernel driver
(no problem at wifi channel 13)
- Support Voltage Control (VDD Control - /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels_havs)
- Ondemand tweak
- Support AXI,HW3D
- CPU Clock control 128-1190 (not recomanded 128Mhz at AXI Kernel)
- Improve SDHC card stability
- Ultra save battery
mesured Current-widget - minimum 2mA at sleep
3.2r1 -> 3.3 changeset
- change smartass codes and tweak
3.3 -> 3.7 changeset
- change AVS, Cpufreq Driver
- Excluded Smartass governor
- add SmartassV2 CPU Governor
- add Lagfree CPU Governor
- add Lazy CPU Governor
- VFP Compile flag change
- module tun.ko, cifs.ko
- change WIFI Driver by pershoot
3.7 -> 3.9 changeset
- High frequency cpu clock AVS Votage change for improve stability
- amplification sound
- Compiled by Linaro GCC 4.5.4 (2011.08)
- fuse module
- Other module settings changed
KERNEL works on Cyanogenmod, MIUI, Oxygen(higher version) Rom
Strongly recomand "Ondemand" governor
it's smoothest
experience "Extreme Smooth"
Better than iphone4 or GalaxyS2
Next Kernel will be change to base on CM7 Stock kernel
Happy new year!!!!!
Thanks to Cayniarb, Cyanogenmod team, intersectRaven, ch33kybutt, pershoot
Wipe dalvik-cache after update
KGPNeok Nexroid UltimateS v3.3 Kernel source (for developer only)
http://www.multiupload.com/3HIM8VGVMD
Dude, you know how to catch us
Testing it now...
Sent from my Nexus One using Tapatalk
Gotta try this one out! thanks man!
Update: I should say this is smoother. And apps loads faster on my MIUI.
what governor works best?
Markdental said:
what governor works best?
Click to expand...
Click to collapse
I stayed with smartass2 for a while now on MIUI and Wildmonks Kernel. This kernel lacks that smartass2 govenor, so i am using the tweaked ondemand one. I must say it is smoother and i didn't have any issues so far. Battery drain is ABOUT the same - cannot really give any definite opinions cuz i used it for only hours now.
But i'll report back. Try the ondemand one - its good so far.
How install it? Should i put the zip on the SD card and install it in the bootloader?
Add SmartAssV2 governor please.
Sent from my Nexus One using XDA App
[offtopic]Dude you wanna build us an msm-3.0 kernel for ICS?[/offtopic]
[offtopic] What the awesome Texasice asked, above. Please! [/offtopic]
Dude, what are r1? Is this the same kernel version built-in on your ROM as well?
ebautista said:
Gotta try this one out! thanks man!
Update: I should say this is smoother. And apps loads faster on my MIUI.
Click to expand...
Click to collapse
thanks
Markdental said:
what governor works best?
Click to expand...
Click to collapse
i strongly recommand ondemand
bunnahabhain said:
I stayed with smartass2 for a while now on MIUI and Wildmonks Kernel. This kernel lacks that smartass2 govenor, so i am using the tweaked ondemand one. I must say it is smoother and i didn't have any issues so far. Battery drain is ABOUT the same - cannot really give any definite opinions cuz i used it for only hours now.
But i'll report back. Try the ondemand one - its good so far.
Click to expand...
Click to collapse
smartass is bad working on my kernel
strongly recommand ondemand
giganielsie said:
How install it? Should i put the zip on the SD card and install it in the bootloader?
Click to expand...
Click to collapse
update on recovery mode
cpm said:
Add SmartAssV2 governor please.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
i tried to add smartassv2 but it has some problem
sorry
texasice said:
[offtopic]Dude you wanna build us an msm-3.0 kernel for ICS?[/offtopic]
Click to expand...
Click to collapse
that's very interesting
if you provide kernel source,
i'm try to build kernel
revthanki said:
[offtopic] What the awesome Texasice asked, above. Please! [/offtopic]
Click to expand...
Click to collapse
alisabki said:
Dude, what are r1? Is this the same kernel version built-in on your ROM as well?
Click to expand...
Click to collapse
it's little change
added Improve SDHC card stability on r1 version
test kernel is out
-change smartass codes and tweak
but still strongly recommand ondemand
i tried to smartassv2 but it has critical problem
not include smartassv2
it's unsigned packge
kgp700 said:
test kernel is out
-change smartass codes and tweak
but still strongly recommand ondemand
i tried to smartassv2 but it has critical problem
not include smartassv2
it's unsigned packge
Click to expand...
Click to collapse
need to wipe dalvik cache too right?
alisabki said:
need to wipe dalvik cache too right?
Click to expand...
Click to collapse
recommand that
You say it will work with oxygen and you thank ch33kybutt in your post, does that mean it'll work on his oxygen1mod?
pongalong said:
You say it will work with oxygen and you thank ch33kybutt in your post, does that mean it'll work on his oxygen1mod?
Click to expand...
Click to collapse
yes, this kernel working on oxygen1mod
but old version is not working
working on OxygeN1mod-2011.11.26 version or higher version
Great Job Dude! Didnt know u start a kernel!
Sent from my GT-I9000 using Tapatalk
DaxElectro said:
Great Job Dude! Didnt know u start a kernel!
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
thanks!!
This seems to break my wifi. After flashing, everything seems okay but wifi just says 'error' when I try to turn it on. Anyone else have this?
I am on CM7 newest nightly
Come to think about it, ever since I flashed one of his previous builds, every time I try to flash a diff kernel I get this problem. Think I had this problem with one of IR's kernels...
aujbman said:
This seems to break my wifi. After flashing, everything seems okay but wifi just says 'error' when I try to turn it on. Anyone else have this?
I am on CM7 newest nightly
Come to think about it, ever since I flashed one of his previous builds, every time I try to flash a diff kernel I get this problem. Think I had this problem with one of IR's kernels...
Click to expand...
Click to collapse
4 hours with lastest kernel (r2) and Wifi ON. No problems at all.
Team Darkforest: Kernel
Maintained by Atarii and Keiran of Team Darkforest, forked from FreeXperia kernel sources
Download v4: http://icxperia.com/keiran/cm9/DarkForest4.img
Download v5: http://icxperia.com/keiran/Darkforest5.img
Features of v5:
Recovery keys remapped
Two way call recording (FreeXperia)
Features of v4:
Added 1.6GHz Overclock
Features of v3:
Forked newest FXP kernel.
Disconnected ALS in kernel - read below.
Enabled some governors that were not already enabled.
SEMC kernel update
About the ALS being disconnected, here I explain:
In v2 of the kernel, I had produced a script inside the kernel and an app that ran the script, and basically what this did was check if `cat /sys/devices/i2c-0/0-0040/leds/lcd-backlight/als/enable` was equal to 1, if it was, it changed it back to zero. The problem with this is that it used CPU cycles and impacted on battery, as well as caused flickering.
In v3 onwards, I have done this: https://github.com/keiranFTW/semc-k...mmit/6f252f86b862c9483bc900a8c1bef73f88f8192c
Atarii mentioned for me to do it, and so I did, and what it does is tell the kernel that the ambient light sensor is not attached, and therefore it cannot dictate the screen brightness, so you could say it is physically turned off.
Sources are at github: https://github.com/keiranFTW/semc-kernel-msm7x30-ics-1
and FXP source: https://github.com/freexperia/semc-kernel-msm7x30-ics/tree/ics-beta
damn you are quick.
i just wanted to make a thread for my new cm9 kernel
did i miss something?
is ICS out?
or are the beta kernel sources out?
DooMLoRD said:
did i miss something?
is ICS out?
or are the beta kernel sources out?
Click to expand...
Click to collapse
What do you mean?
This is based on the CM9 FXP kernel. Data now works on CM9
Keiran
Is the battery life better on this kernel or on the stock CM9 kernel included in the data fix
wow its awesome. i will try !
RiThBo said:
Is the battery life better on this kernel or on the stock CM9 kernel included in the data fix
Click to expand...
Click to collapse
well, depends what settings you use. You could say some of the CPU governors I enabled may better battery life
KeiranFTW said:
well, depends what settings you use. You could say some of the CPU governors I enabled may better battery life
Click to expand...
Click to collapse
Just flashing now. I am using yours...
UPDATE: It booted... YAY. Thanks
Does this have cwm built in?
Michealtbh said:
Does this have cwm built in?
Click to expand...
Click to collapse
Yes
//10char
Booted, Thanks Keiran
I love the dedication that you bring to the XPlays Table!
-.- For me it boots... but the phone doesn't detect my SIM -.-...
it booted succesfuly, thanks.... but does data work with this???? Because after enable data conection, it doesnt connect to 2G/3G... only works with wifi
KeiranFTW said:
Darkforest Kernel CyanogenMod 9 - Custom Kernel based on FreeXperia sources
Enabled CPU governors:
powersave
performance
conservative
minmax
interactivex
savagedzen
smartassv2
Enabled IO schedulers:
AS
Deadline
CFQ
VR
v1: http://icxperia.com/keiran/cm9/boot.img
Click to expand...
Click to collapse
is this not insecure kernel? its says adb remount operation not permitted and according to google you need ro.secure to be off or something lol. i have no idea if this is relevant for xperia play though.
EDIT:
doomlord kernel is insecure so i guessing the above is relevant to play aswell.
[v01 onwards] insecure kernel
kernel is insecure (ro.secure=0)
Click to expand...
Click to collapse
KeiranFTW said:
What do you mean?
This is based on the CM9 FXP kernel. Data now works on CM9
Keiran
Click to expand...
Click to collapse
ah just what i thought...
continue kanging
flash the data fix from 1 of the last few pages of the cm9 post.
fma965 said:
flash the data fix from 1 of the last few pages of the cm9 post.
Click to expand...
Click to collapse
yeah, it works!!!!!!!!!!!1
Ah ****.
Will set kernel to insecure tomorrow when I have time
Sent from my Xperia Play using Tapatalk
KeiranFTW said:
Ah ****.
Will set kernel to insecure tomorrow when I have time
Sent from my Xperia Play using Tapatalk
Click to expand...
Click to collapse
just checked and the cm9 1 is the same.
Asdoos said:
-.- For me it boots... but the phone doesn't detect my SIM -.-...
Click to expand...
Click to collapse
Du musst deinen PIN deaktivieren und unter Einstellungen Manuellen Suchlauf der Netzwerke durchführen.
Doch weder HSDPA noch EDGE funktionieren.
I have Tried yours but it dosent work for mine.
Here i've tried compile kernel for Neo/V users. Thanks to kormatoes for asking me to make kernel for AOKP. Then later i decided to make for Stock ICS too. Thanks to those who help me test these kernel since i've owned Xperia Ray not Xperia Neo/V
[ XNeo AOKP v1.2.431 ] AOKP BASED ROM NEW
- vids record / playback fixed
[ XNeo ICS v2.1.431 ] ICS 4.0.4 NEW
[ XNeo Kernel V2.0 ] ICS BASED ROM NEW Build from 4.1.H.0.4 kernel source for Play ICS Beta
### LOST & FOUND ###
[ XNeo ICS v1.1 Repack ] ICS based rom
[ XNeo AOKP v1.1 ] AOKP ROM
NOTE: [For stock ICS ONLY] If you come from other kernel, please flash this modules using cwm
Updates
// XNeo ICS v2.0 - 4.1.H.0.4 source, patches: ZRAM, smartassv2
// XNeo ICS v1.1 Repack - re-added Intellidemand. swap/ext4 support. tun.ko module in /res/modules
// AOKP v1.1 - added Intellidemand gov (dont use with IO vr, caused reboot when screen off)
Intellidemand:
Intellidemand aka Intelligent Ondemand from Faux is yet another governor that's based on ondemand. Unlike what some users believe, this governor is not the replacement for OC Daemon (Having different governors for sleep and awake). The original intellidemand behaves differently according to GPU usage. When GPU is really busy (gaming, maps, benchmarking, etc) intellidemand behaves like ondemand. When GPU is 'idling' (or moderately busy), intellidemand limits max frequency to a step depending on frequencies available in your device/kernel for saving battery. This is called browsing mode. We can see some 'traces' of interactive governor here. Frequency scale-up decision is made based on idling time of CPU. Lower idling time (<20%) causes CPU to scale-up from current frequency. Frequency scale-down happens at steps=5% of max frequency. (This parameter is tunable only in conservative, among the popular governors)
To sum up, this is an intelligent ondemand that enters browsing mode to limit max frequency when GPU is idling, and (exits browsing mode) behaves like ondemand when GPU is busy; to deliver performance for gaming and such. Intellidemand does not jump to highest frequency when screen is off.
Click to expand...
Click to collapse
How to make simple ZRAM init.d script
1. Using Root Explorer, got to /sytem/etc/init.d/
2. press Menu then create new file
3. paste these in it
Code:
#!/system/bin/sh
sysctl -w vm.swappiness=40
echo "1" > /sys/block/zram0/reset
echo $((50*1024*1024)) > /sys/block/zram0/disksize
mkswap /dev/block/zram0
swapon /dev/block/zram0
4. close and save it as 60ZRAM
5. set permission to 777 or "rwxrwxrwx" (tick all)
6. take note: 50*1024*1024 = 50MB zram disksize. if you want to set 30MB, change 50 to 30.
Click to expand...
Click to collapse
((( Special Thanks to )))
DooMLoRD - thanks for his github sources
FXP - for AOKP Kernel sources
Kormatoes - for let me using his thread for starting up
ThilinaC - for nice AOKP bootlogo
Tenacius D - for being XNeo AOKP tester
Mikk36 - for being XNeo ICS tester
Night Elf - for his ramdisk source
Madfysh - XNeo v2.0 tester
Click to expand...
Click to collapse
GiT
https://github.com/sirkay
Finally....
sent by tapatalk via super xperia Neo
asked that question on the topic AOKP Neo / v was wondering if your kernel has support for USB on the go, external memory, such as pen drive. Tested with mouse and pen drive worked but I can not seem to have the appropriate drivers. From what I saw in some threads here at XDA need these drivers.
I did the flash, I'm using the AOKP kormatoes, and so far everything is normal.
juninromualdo said:
asked that question on the topic AOKP Neo / v was wondering if your kernel has support for USB on the go, external memory, such as pen drive. Tested with mouse and pen drive worked but I can not seem to have the appropriate drivers. From what I saw in some threads here at XDA need these drivers.
I did the flash, I'm using the AOKP kormatoes, and so far everything is normal.
Click to expand...
Click to collapse
as i know 4.1.C.0.7 sources support OTG. i never test it even with ray's kernel
Sent from my ST18i using xda premium
try ask someone that success using OTG
juninromualdo said:
asked that question on the topic AOKP Neo / v was wondering if your kernel has support for USB on the go, external memory, such as pen drive. Tested with mouse and pen drive worked but I can not seem to have the appropriate drivers. From what I saw in some threads here at XDA need these drivers.
Click to expand...
Click to collapse
Just use this, OTG mass storage will work.
shardul_seth said:
Just use this, OTG mass storage will work.
Click to expand...
Click to collapse
Tested.
sent by tapatalk via super xperia Neo
so it does work? 2-way call recording also support. check on my kernel thread in ray developement for call recording apps.
Sent from my ST18i using xda premium
sirkay said:
so it does work? 2-way call recording also support. check on my kernel thread in ray developement for call recording apps.
Sent from my ST18i using xda premium
Click to expand...
Click to collapse
I already test it with ur kernel. Usb otg cant work. Even i push setting for stock kernel. Its still doesnt work..
sent by tapatalk via super xperia Neo
@sirkay i attempted to flash aokp version on cm9 and it stuck on bootanimation forever ;p
How with battery life?
ZduneX25 said:
@sirkay i attempted to flash aokp version on cm9 and it stuck on bootanimation forever ;p
Click to expand...
Click to collapse
hmm wonder why coz am using FXP kernel source .. someone happened to succeed flash on cm9.
szymko1995 said:
How with battery life?
Click to expand...
Click to collapse
here to check it out --> http://forum.xda-developers.com/showpost.php?p=25565382&postcount=413
he using my kernel
@sirkay well cannot provide a logcat here, cause I already changed whole rom, just wanted to let you know i was trying on cm9 fxp115
I just tried this kernel on my Neo V with i-scream rom. I flashed it without wiping anything but wifi wasnt working. After that i made a factory reset and get an endless bootloop.
Was sounding like a good kernel but now i will try another. Thank you for your efforts.
szymko1995 said:
How with battery life?
Click to expand...
Click to collapse
KA15 + this kernel (don't know if it's the latest build, got it from sirkay directly):
Slow charging in the end is because of simultaneous video recording and GPS logging (will get even worse now because I added automatic bluetooth enabling ).
spiritualwar said:
I just tried this kernel on my Neo V with i-scream rom. I flashed it without wiping anything but wifi wasnt working. After that i made a factory reset and get an endless bootloop.
Was sounding like a good kernel but now i will try another. Thank you for your efforts.
Click to expand...
Click to collapse
I'm using this kernel on I-Scream 10 and it working good so far, the only thing you have to do is flash stock kernel with stock WiFi modules reboot and then flash back to this kernel and woala WiFi is working. That is how I did it working when crossing from NightElf kernel to this one.
Sipi1302 said:
I'm using this kernel on I-Scream 10 and it working good so far, the only thing you have to do is flash stock kernel with stock WiFi modules reboot and then flash back to this kernel and woala WiFi is working. That is how I did it working when crossing from NightElf kernel to this one.
Click to expand...
Click to collapse
where can i get stock wifi module??
Sent from my MT11i using XDA
talhah sabri said:
where can i get stock wifi module??
Sent from my MT11i using XDA
Click to expand...
Click to collapse
Flash this kernel by shardul_seth Stock ICS w init.d support+root+cwm! [Final] latest version 3, boot into system turn the phone off and flash sirkay kernel.
Sipi1302 said:
I'm using this kernel on I-Scream 10 and it working good so far, the only thing you have to do is flash stock kernel with stock WiFi modules reboot and then flash back to this kernel and woala WiFi is working. That is how I did it working when crossing from NightElf kernel to this one.
Click to expand...
Click to collapse
Do you mean this module? http://forum.xda-developers.com/showthread.php?t=1609617
If yes, i have try it with nightelf kernel and aokp rom but it's not working. I haven't time yet to try it again.
v2 Released. Scroll down for info!
Hello,
After lots of help from sirkay and FXP, I've built my own kernel that I thought I'd share with you.
This kernel wouldn't exist without the hard work of FXP. This is built from his source code. All real credit for this belongs with him (and DoomLord too, also an FXP Team member)
That said, this is my take and keeps the rather awesome release that is CM7.2 alive!
To be clear: This is a kernel for Cyanogen Mod 7.2 - Gingerbread! If you want a good ICS Kernel look at Sirkay's Thread.
So, what's different?
Uses a very recent GCC to compile, GCC version 4.6.3 which I optimised the build for Cortex-a8 and NEON.
Is compiled for performance not size (Optimize for size unticked)
Heap Randomisation is disabled.
Enabled SWAP - So you can use swap if you want to...
Default Scheduler changed to deadline, same as the Sony official kernel (still has bfq if you want to use it)
Default governor changed to ondemand.
CONFIG_OABI_COMPAT turned off. (This might break apps, haven't found any yet though)
Disabled CPUFreq Debugging.
Disabled FRAME_POINTERS, enabled STACK_UNWIND. Reason here: http://lists.openmoko.org/nabble.html#nabble-td6126708
There is no boot logo when this kernel boots. Each time I added one, the kernel refused to boot. I'll look at that. Just have patience, your phone is booting still...
(Here's where I make lots of stupid claims about how smooth, how buttery, how much battery life this kernel saves. Except I'm not a screaming idiot, so I'm not going to do that!)
I'm interested in any feedback you have, but I did this mostly for me.
And please remember the real person to thank, FXP. It's his source code I've used to build this. Also again thanks to Sirkay for his help and pointers.
Download it from here.
- muppet
Nice Kernel what's battery performance ??
aditya080908 said:
Nice Kernel what's battery performance ??
Click to expand...
Click to collapse
About the same as every other kernel.
OTG support? ?!
Sent from my ST18i
so good, This is what I looking for
@muppetmania attach here you png file. i can try to convert it to .rle for you
Could GB MIUI have the privilege?
Could we have a CM7 based MIUI 2.3.7 kernel?
I think GB MIUI works just fine and don't want to upgrade to ICS or JB.
But a better kernel for GB MIUI is always appreciated.
Thanks in advance,pls let us know if you'd be willing to.
Anoopnk said:
OTG support? ?!
Click to expand...
Click to collapse
If you'd like me to respond to questions, please post an actual articulate question in the first place. Cheers.
Yes, I'm aware I'm a ****, it's been pointed out to me already
sirkay said:
@muppetmania attach here you png file. i can try to convert it to .rle for you
Click to expand...
Click to collapse
Thanks sirkay, but the problem isn't that I can't make a rle file, it's that the rle file when added to the ramdisk stops the kernel booting. It seems to a bug in the SEMC loader, I found a post about it somewhere. Does the boot.img need to be padded out to a certain size to work?
Sometimes my logo.rle would work, but then I'd make changes, recompile, and the kernel would hang on boot. Annoying, so I've removed it for the moment.
rivtre said:
Could we have a CM7 based MIUI 2.3.7 kernel?
I think GB MIUI works just fine and don't want to upgrade to ICS or JB.
But a better kernel for GB MIUI is always appreciated.
Thanks in advance,pls let us know if you'd be willing to.
Click to expand...
Click to collapse
Hi rivtre,
I'd love to help, but my Ray is the only phone I have and is running CM7.2. While I could make a kernel for MIUI I'd have no (easy) way to test it. It wouldn't be fair to anyone if I started releasing untested things. So I'm sorry, it's not that I don't want to help, but no. Anyway, read the next bit to see why that's probably not a bad thing!
To All:
My kernel seems to be terrible when it comes to HD video recording. Can anyone else test this? I get heaps of dropped frames using my kernel when recording HD video vs a FXP Stock kernel. I need to look more at this, but for the moment I'd recommend not using this kernel!
v2 Released!
Version 2 of muppet kernel released.
What's new?
Compiled with GCC 4.7.1
Reverted to BFQ Scheduler by default
Reverted to Interactive CPU Scaling by default
Added logo.rle so you know it's booting!
Removed Debugging Symbols (CONFIG_KALLSYMS)
Reverted the scheduler and CPU scaling as they seemed to be the cause of the video recording lag.
Enjoy!
Download
does the kernel also work with this rom http://forum.xda-developers.com/showthread.php?t=1424121?
can I flqsh the kernel with flashtool?
is overclocking possible?
borg17a said:
does the kernel also work with this rom http://forum.xda-developers.com/showthread.php?t=1424121?
can I flqsh the kernel with flashtool?
is overclocking possible?
Click to expand...
Click to collapse
Not sure if it works with the stock ROM or not - try it and report back.
Yes, like all kernel images, you can flash it with Flashtool.
You can OC up to 1.6Ghz.
I tried it, but It doesn't work. Booting failed
muppetmania said:
Not sure if it works with the stock ROM or not - try it and report back.
Yes, like all kernel images, you can flash it with Flashtool.
You can OC up to 1.6Ghz.
Click to expand...
Click to collapse
borg17a said:
I tried it, but It doesn't work. Booting failed
Click to expand...
Click to collapse
Oh well sorry. It's only for CM7.2
muppetmania said:
Version 2 of muppet kernel released.
What's new?
Compiled with GCC 4.7.1
Reverted to BFQ Scheduler by default
Reverted to Interactive CPU Scaling by default
Added logo.rle so you know it's booting!
Removed Debugging Symbols (CONFIG_KALLSYMS)
Reverted the scheduler and CPU scaling as they seemed to be the cause of the video recording lag.
Enjoy!
Download
Click to expand...
Click to collapse
Just flashed your kernel, going to give a test run! thanks!!
Edit:
Well it doesn't seem to me that the camera recording works at all ... pictures = fine - but when trying to record video - the image freezes - and the camera app crashes.
I have to reboot to get back into the camera app...
Also, can't play any video I previously recorded...
Anything I'm missing?
I've flashed your kernel and did a cache + dalvik wipe...
Cheers!
Apocalyps2 said:
Just flashed your kernel, going to give a test run! thanks!!
Edit:
Well it doesn't seem to me that the camera recording works at all ... pictures = fine - but when trying to record video - the image freezes - and the camera app crashes.
I have to reboot to get back into the camera app...
Also, can't play any video I previously recorded...
Anything I'm missing?
I've flashed your kernel and did a cache + dalvik wipe...
Cheers!
Click to expand...
Click to collapse
Oh, well that's not the sort of feedback I wanted!
I haven't done much video recording the last couple of weeks (I've been away from work)
Let me do some testing and see what I can find...
Thanks for reporting
If you want a logcat I'll make one and get it to you , cheers
Sent from my ST18i using xda app-developers app
GPS
i just install your kernel on my phone...but why my GPS cannot running well
a1nx said:
i just install your kernel on my phone...but why my GPS cannot running well
Click to expand...
Click to collapse
why your bug reporting so terrible
a1nx said:
i just install your kernel on my phone...but why my GPS cannot running well
Click to expand...
Click to collapse
Update baseband to 75 or 77 ...reflash kernel !!!
Have fun !!
Sent from my ST18i
Custom Cyanogenmod12 kernel for the LG G Pad 8.3 V510 (GPE)
Updated 2-21-15 Added FastCharge and three other IO Schedulers to play with. Made Row the default scheduler, and turned off Knock-on by default. Use my app from the second post to activate Knock-on after each boot.
The CyanogenMod12 ROM can be downloaded from HERE
Thank you @aidfarh for all of your hard work!
Custom Kernel built from the cyanogenmod12 kernel source - Download Below
*NOTE - This kernel currently works with stock lollipop as well!
Features:
Flash Through Recovery!
Interactive Governer as default
Compiled using Linaro Toolchain cortex a15-4.9.3
o3 Compile optimizations
Knock-on enabled through app in second post
Fastcharge added as option - enable using Trickstermod
Row, Sio, Fiops, and Zen IO Schedulers added - trickstermod to change
Sound Control using TricksterMod
LCD Screen Control using TricksterMod
Fsync On/Off using Trickstermod (off as default)
User Space Voltage Control - TricksterMod or my 88sleektweaks init.d script to change.
Exfat support (2-4-15 and later CyanogenMod version)
Lots of optimizations with more to come!
The kernel source and Commits that show all changes for this kernel can be found here:GITHUB
Prerequisites
Unlocked bootloader
Root
Install Busybox for init.d support
TricksterMod is recommended for changing settings
How does this work?
Start by making a Backup of your boot in recovery, then:
Flash the latest version in Recovery . Proceed to the downloads below, download to your tablet, reboot into recovery and install the zip --That simple!
if you want to build your own kernel start to finish with complete instructions, you can follow my guide for rolling your own kernel HERE
Please hit "Thanks" to show your support!
DOWNLOAD HERE:
ATTACHED FILES
Knock-on app for my kernel can be downloaded here.
To add my sleektweeks init.d file, and/or the Zipalign file, see my post: HERE
Updated -SleekCyan2 - to include exfat support, LCD screen control, and further optimizations for GPU and the linaro toolchain.
Updated - SleekCyan3 - to include knock-on by default, removal of some debugging, quicker deep sleep. (better battery?)
Thanks for the cm12 kernel. I'm liking you're LP kernel, but will try this one as well...
galaxys said:
Thanks for the cm12 kernel. I'm liking you're LP kernel, but will try this one as well...
Click to expand...
Click to collapse
Thank you! Let me know what you observe.
galaxys said:
Thanks for the cm12 kernel. I'm liking you're LP kernel, but will try this one as well...
Click to expand...
Click to collapse
Thank you! Let me know what you observe.
Exfat support for sdcards now works out of the box with CyanogenMod version 2-4-15 and later.
So I flashed this last night when I saw you posted it recently and this morning I checked it and it had zero battery drain overnight, very nice. Can't wait to dig in a little deeper when I get time. Between this and the new CM12, 2015 is really shaping up to be a good year for the old (but great) v510, finally, thank you.
Sleekmason:
I should be able to use the same sleektweaks and zipalign stuff from the Lollipop kernel, correct?
Thanks
techinv said:
Sleekmason:
I should be able to use the same sleektweaks and zipalign stuff from the Lollipop kernel, correct?
Thanks
Click to expand...
Click to collapse
Yep! The latest 88sleektweaks has voltage control table as well ( already adjusted down a bit to the settings I use). These can be changed here but be careful! TricksterMod is useful for making the initial changes to test as they won't get restored on boot. If you change them in the file and something goes wrong, you will have to remove the file using twrp.
sleekmason said:
Thank you! Let me know what you observe.
Click to expand...
Click to collapse
Just tried it with CM12 and it's a super V510 combo! Feels fast and smooth! Thanks for your XDA development & contribution.
UPDATED 2-12-15
Added Row IO Scheduler and Sound control - Change using trickster or in settings for row, and in trickster for sound control. Also added upstream fixes.
Is Row better than cfq? I think maybe it is . . . Battery will be the deciding factor for me. If anybody wants Row default for this kernel, let me know and I will implement it on next version. Regards,
I'll give it a go tomorrow, currently I've tweeked to Ondemand and ReadAhead to 512. Cool
galaxys said:
I'll give it a go tomorrow, currently I've tweeked to Ondemand and ReadAhead to 512. Cool
Click to expand...
Click to collapse
Are you finding On-demand better than Interactive? Seems like interactive is smoother to me. Also, keep in mind that the larger the read ahead the more battery is used.
sleekmason said:
Are you finding On-demand better than Interactive? Seems like interactive is smoother to me. Also, keep in mind that the larger the read ahead the more battery is used.
Click to expand...
Click to collapse
Not much difference maybe slightly faster but still analyzing with the new rom update...
BTW, did you see my post cm12 rom about GPS? Maybe you can take a look...
Row is working very good & smooth so far (speed, smooth & stable are my priorities and then battery). Think I'll stay with it; up to you if u want it as default.
galaxys said:
Row is working very good & smooth so far (speed, smooth & stable are my priorities and then battery). Think I'll stay with it; up to you if u want it as default.
Click to expand...
Click to collapse
Those who speak up get to choose! Row it is! Will update including row as default next compile.
Great kernel guide thread for those of us who like to mod & test settings in Sleek's Cool kernels!
http://forum.xda-developers.com/lg-...gn=Feed:+xda-developers/ShsH+(xda-developers)