One more from noobville!
I was using ShishirRom (ICS) since a week. Today I was trying to flash CM9-Stable-Version in the morning. And 2 major problems occurred.
1. While I was transferring the CM-9-Stable-Version file to my phone, I was checking out the ROM Manager (I know you hate me already!!) and I pressed the Backup Current ROM Button instead of the back button on my phone. (**** Im stupid ) But wait there is more!
2. While I was finally able to get into Download Mode after 30 minutes of fiddling and was trying to flash via Odin to return to Stock and start all over again, my dear a$$hole friend pulled the plug while the Odin was in progress. (Yes, I am having one of those worst days)
Current situation: Phone does not boot-up - means NO ODIN RECOGNITION / NOT RECOGNIZED BY LAPTOP / NO DOWNLOAD-MODE / NO RECOVERY-MODE / NO CWM.
I have been googling about ADB and how to use it, but honestly I have not found on a How-to. I have read that ADB can reboot the phone into Download Mode or Recovery Mode, but I don't know how to use it. I don't know how to use ADB does not mean I didn't google it. I just couldn't find a guide to use it in my situation. If you can, please send me a link
May The Force Be With You! And may you help me search my answer! \m/
Ok so this might look dumb of me, but I am desperate here. I know its a weekend, and everybody is drunk. And probably I am the only lonely trying to figure out what the hell is ADB!
I look up to this site and the developers here. And I shouldn't, but I have, started expecting from all of you knowledgeable individuals. I would be hurt to be let down. Please help!
Thank you everyone in advance.
Not sure if this is what you're looking for but worth checking out.
http://developer.android.com/tools/help/adb.html
try using a "USB JIG" see if that helps you to get into download mode...did u try remove battery,plug-in USB and insert battery while holding download mode combo(VOL up+VOL dwn and may be power button too)see if that gets you into download mode or else try USB JIG...i suggest check Entropy and creepycrawler posts
nikhilppatel said:
One more from noobville!
I was using ShishirRom (ICS) since a week. Today I was trying to flash CM9-Stable-Version in the morning. And 2 major problems occurred.
1. While I was transferring the CM-9-Stable-Version file to my phone, I was checking out the ROM Manager (I know you hate me already!!) and I pressed the Backup Current ROM Button instead of the back button on my phone. (**** Im stupid ) But wait there is more!
2. While I was finally able to get into Download Mode after 30 minutes of fiddling and was trying to flash via Odin to return to Stock and start all over again, my dear a$$hole friend pulled the plug while the Odin was in progress. (Yes, I am having one of those worst days)
Current situation: Phone does not boot-up - means NO ODIN RECOGNITION / NOT RECOGNIZED BY LAPTOP / NO DOWNLOAD-MODE / NO RECOVERY-MODE / NO CWM.
I have been googling about ADB and how to use it, but honestly I have not found on a How-to. I have read that ADB can reboot the phone into Download Mode or Recovery Mode, but I don't know how to use it. I don't know how to use ADB does not mean I didn't google it. I just couldn't find a guide to use it in my situation. If you can, please send me a link
May The Force Be With You! And may you help me search my answer! \m/
Click to expand...
Click to collapse
These links are #1,4,5,6 and 7 on my google results:
[GUIDE] ADB Driver Install for Dummies
[GUIDE] ADB - Usage, Tips, Tricks and More!
[GUIDE] (For Noobs) SDK, ADB, and Drivers
[GUIDE] ADB Workshop and Guide for everyone
[HOW-TO] ADB for Dummies(How-To Learner's Guide)
I'm an adb nub, but pretty sure debugging need to be have already been enabled in development options for you to be able to get in that way.
nikhilppatel said:
One more from noobville!
I was using ShishirRom (ICS) since a week. Today I was trying to flash CM9-Stable-Version in the morning. And 2 major problems occurred.
1. While I was transferring the CM-9-Stable-Version file to my phone, I was checking out the ROM Manager (I know you hate me already!!) and I pressed the Backup Current ROM Button instead of the back button on my phone. (**** Im stupid ) But wait there is more!
2. While I was finally able to get into Download Mode after 30 minutes of fiddling and was trying to flash via Odin to return to Stock and start all over again, my dear a$$hole friend pulled the plug while the Odin was in progress. (Yes, I am having one of those worst days)
Current situation: Phone does not boot-up - means NO ODIN RECOGNITION / NOT RECOGNIZED BY LAPTOP / NO DOWNLOAD-MODE / NO RECOVERY-MODE / NO CWM.
I have been googling about ADB and how to use it, but honestly I have not found on a How-to. I have read that ADB can reboot the phone into Download Mode or Recovery Mode, but I don't know how to use it. I don't know how to use ADB does not mean I didn't google it. I just couldn't find a guide to use it in my situation. If you can, please send me a link
May The Force Be With You! And may you help me search my answer! \m/
Click to expand...
Click to collapse
Remove battery and keep it for approx 15 min
then plug in battery chk if its wrkin or get a usb jig and chk if it gets to download mode..
if it dosin show any sign of life
then
keep it for chargin and check if the portion below the camera is gettin hot
if it is then u have hardbricked ur phone
ALSO PLEASE DO NOT USE ROM MANAGER IT HAS BRICKED MANY S2
If it is in warranty then u can claim it but don do the mistake of tellin them u rooted or nything
nikhilppatel said:
One more from noobville!
I was using ShishirRom (ICS) since a week. Today I was trying to flash CM9-Stable-Version in the morning. And 2 major problems occurred.
1. While I was transferring the CM-9-Stable-Version file to my phone, I was checking out the ROM Manager (I know you hate me already!!) and I pressed the Backup Current ROM Button instead of the back button on my phone. (**** Im stupid ) But wait there is more!
2. While I was finally able to get into Download Mode after 30 minutes of fiddling and was trying to flash via Odin to return to Stock and start all over again, my dear a$$hole friend pulled the plug while the Odin was in progress. (Yes, I am having one of those worst days)
Current situation: Phone does not boot-up - means NO ODIN RECOGNITION / NOT RECOGNIZED BY LAPTOP / NO DOWNLOAD-MODE / NO RECOVERY-MODE / NO CWM.
I have been googling about ADB and how to use it, but honestly I have not found on a How-to. I have read that ADB can reboot the phone into Download Mode or Recovery Mode, but I don't know how to use it. I don't know how to use ADB does not mean I didn't google it. I just couldn't find a guide to use it in my situation. If you can, please send me a link
May The Force Be With You! And may you help me search my answer! \m/
Oh and the part about all of us being drunk
Click to expand...
Click to collapse
**All my favorite parts of the story are in bold :laugh:
I hope you're under warranty man, best of luck
jthatch12 said:
**All my favorite parts of the story are in bold :laugh:
I hope you're under warranty man, best of luck
Click to expand...
Click to collapse
I wonder if it was his friend...
122ninjas said:
I wonder if it was his friend...
Click to expand...
Click to collapse
Haha me? Nope no idea who the kid is. Friends don't let Friends use Rom Manager.
Thank you all of you insightful people to have atleast commented and helped in the ways you could. I am pretty sure I have hard-bricked my phone.
My next steps of action:
1. Go to AT&T shop and confirm on my warranty.
2. http://mobiletechvideos.mybigcommerce.com/
3. If above 2 steps don't work, quit android till I get a job :crying:
Thank you all of you \m/
neerajganga said:
Remove battery and keep it for approx 15 min
then plug in battery chk if its wrkin or get a usb jig and chk if it gets to download mode..
if it dosin show any sign of life
then
keep it for chargin and check if the portion below the camera is gettin hot
if it is then u have hardbricked ur phone
ALSO PLEASE DO NOT USE ROM MANAGER IT HAS BRICKED MANY S2
If it is in warranty then u can claim it but don do the mistake of tellin them u rooted or nything
Click to expand...
Click to collapse
I just got the USB-JIG. I followed the instructions you mentioned, but it does not work. The USB-JIG does not help either.
Im actually in the process of moving interstate. Once its done, I will contact the local AT&T shop to find out more on warranty replacement, since I am still under warranty.
Thank you anyway; even if it didn't start my phone, I still learnt a lesson: NEVER DO ANDROID STUFF IN OFFICE TIME, OR YOUR STUPID FRIEND WILL UNPLUG YOUR PHONE THINKING ITS JUST CHARGING.
nikhilppatel said:
I just got the USB-JIG. I followed the instructions you mentioned, but it does not work. The USB-JIG does not help either.
Im actually in the process of moving interstate. Once its done, I will contact the local AT&T shop to find out more on warranty replacement, since I am still under warranty.
Thank you anyway; even if it didn't start my phone, I still learnt a lesson: NEVER DO ANDROID STUFF IN OFFICE TIME, OR YOUR STUPID FRIEND WILL UNPLUG YOUR PHONE THINKING ITS JUST CHARGING.
Click to expand...
Click to collapse
if nothin shows up usin jig
then ur phone is dead
get it to service center
and they wud replace it
jus don tell them wat u did
neerajganga said:
if nothin shows up usin jig
then ur phone is dead
get it to service center
and they wud replace it
jus don tell them wat u did
Click to expand...
Click to collapse
Then you would be what we like to call a "moneyover" don't do that, mobiletechvideos.com probably can fix it
Sent from team Pirate! Using Tapatalk 2
Just got my i777 back from MobileTechVideos.com. An excellent lesson learnt at an affordable price. Pure gingerbread bonestock.
And I'm headed down the same rooting business. One a droid, always an-droid
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
nikhilppatel said:
Just got my i777 back from MobileTechVideos.com. An excellent lesson learnt at an affordable price. Pure gingerbread bonestock.
And I'm headed down the same rooting business. One a droid, always an-droid
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Let's hope you've done some reading.
Sent from my SGH-I777 using Tapatalk 2
Related
My phone is 100% bricked, I was flashing blitzkrieg bootloader to flash his ROM and something went wrong.
Now my phone wont turn on, wont nothing. . .
So the Question is: has anyone went out of this? I now the jig method, but I searched and didnt find anything.
eif you borked the bootloader there is a good chance there isnt much you can do besides a jtag reset, now a jig wouldnt hurt to try but i wouldln't count on it working. i personally will always stay away from bootloaders until i get my own jtag rig.
Goodluck bro hopefully the jig works.
if the vibrant is originally yours you could make a warranty claim with samsung stating you were attempting to flash 2.2 through keis and your phone wont work now, otherwise like said jig maybe, Jtag almost assuredly, will fix your phone.
If you are actually considering a JTAGing, search in the forum for connexion2005. He have lots of experience doing it and have a website and everything.
Its sad, but you remembered me why i shouldn't mess with the bootloader. Goodluck with your phone bro...
What happened during the bootloader flash? I just flashed the GB bootloader and the whole process was over in less than 10 seconds, not much room for error..
anthonys2r said:
What happened during the bootloader flash? I just flashed the GB bootloader and the whole process was over in less than 10 seconds, not much room for error..
Click to expand...
Click to collapse
I do not why (dont ask) I added the stock .pit file! ... i think there was the error...
anthonys2r said:
What happened during the bootloader flash? I just flashed the GB bootloader and the whole process was over in less than 10 seconds, not much room for error..
Click to expand...
Click to collapse
I am actually considering a Jtag, but I'm in México so I had to find someone who does that here. . . actually only found 2 people lol
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
shreddintyres said:
eif you borked the bootloader there is a good chance there isnt much you can do besides a jtag reset, now a jig wouldnt hurt to try but i wouldln't count on it working. i personally will always stay away from bootloaders until i get my own jtag rig.
Goodluck bro hopefully the jig works.
if the vibrant is originally yours you could make a warranty claim with samsung stating you were attempting to flash 2.2 through keis and your phone wont work now, otherwise like said jig maybe, Jtag almost assuredly, will fix your phone.
Click to expand...
Click to collapse
I couldn't agree more with everything in this post. Nice community situation here
- The Samsung Kies killed my phone excuse has gotta be the ultimate life saver, but over time I'm starting to agree with others that it's probably not something I should endorse. As I root more and more of my friends devices I'm starting to find that 1) I hate them. and 2) NOBODY will read an OP all the way through!
kawika said:
As I root more and more of my friends devices I'm starting to find that 1) I hate them. and 2) NOBODY will read an OP all the way through!
Click to expand...
Click to collapse
I thought i was the only one who felt that way about my friends!! Really how hard is it to read a op!
kawika said:
I couldn't agree more with everything in this post. Nice community situation here
- The Samsung Kies killed my phone excuse has gotta be the ultimate life saver, but over time I'm starting to agree with others that it's probably not something I should endorse.
Click to expand...
Click to collapse
I wholly agree with you that this method is something that should be avoided if at all possible, however I know jtag services can be hard to find as well as sometimes quite costly.
@op let us know how it all turns out for you
-Cheers
Sent from my SGH-T959 using XDA Premium App
Your battery probably died.
You dont have to flash a pit with it because it uses the phones native pit when flashing the bootloader.
Also, the OP for the gb Bootloader states that it CHANGES the key mapping. volume up and power gets you dl mode. Try that before jtag. I had this problem trying to flash the rom because i couldnt figure out recovery. Turns out I didn't read it right. I read it through, just didn't interpret it correctly.
PabxH said:
My phone is 100% bricked, I was flashing blitzkrieg bootloader to flash his ROM and something went wrong.
Now my phone wont turn on, wont nothing. . .
So the Question is: has anyone went out of this? I now the jig method, but I searched and didnt find anything.
Click to expand...
Click to collapse
As mentioned I'm able to JTAG your phone back to life as well as any other bricked Vibrants. PM me if you need any help with this...
plug usb cable and press vol up+vol down.. then use odin.. samsung phones are never bricked..
movieaddict said:
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
Click to expand...
Click to collapse
omg thank you for that i thought my phone was BRICKED and hten i was soo sad so i was looking through hte post andd i saw ^^^that one and i thought it wont hurt to try one last time so i did and it worked
very unfortunate to tell u i m also suffering same problem and dont hav idea abt jtag.. plz let me know i know abt odin cwm kies update processes will used them b4.. but watz jtag
movieaddict said:
power off phone
pull out battery
GRAB THIS STUFF : http://forum.xda-developers.com/showthread.php?t=1047087
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
Click to expand...
Click to collapse
Thank You so much. I was trying to flash back to stock using odin and forgot to put in the pda file. I was only using pit and it bricked. No download mode, left it off for hours, pure blackness. Until I tried your method of plugging in the usb and holding the volume buttons then plugging in the battery. Thank you.
Fazeh said:
Thank You so much. I was trying to flash back to stock using odin and forgot to put in the pda file. I was only using pit and it bricked. No download mode, left it off for hours, pure blackness. Until I tried your method of plugging in the usb and holding the volume buttons then plugging in the battery. Thank you.
Click to expand...
Click to collapse
Great news and nice tip from the OP. However, if that tip works, you were not fully hard bricked...
Ok, last update: I got it repaired!
JTAG was the only solution for this.
My phone was:
DEAD, NO SCREEN BOOT UP NO NOTHING
NO REACTIONS AT ALL
NO BATTERY CHARGING IMAGE
NO NOTHING!!! JUST A TOTAL BRICK.
Thank you all!!
Glad to hear you got it sorted out be careful flashing those boot loaders
Sent from my SGH-T959 using XDA Premium App
bricked my phone vibrant
I faced the same issue when my phone got bricked.
1. odin back to jfd
2. GB bootloader installed.
3. updated to 2.2 froyo via kies...
after that the phone never turned onn...BRICKED...
sending it to connection2005 for JTAG...
hope that resolves the issue.
Hello Guys!
My friend bought a SGS2 and he whanted to root it and to put MiUi on it. Now he unpluged it while it was in the Odin doing something with PIT...
It stopped and now he can't go anymore in the download mode and the phone remains black...
is that a full brick? is there any chance to run it again?
do you need more informations?
I looked throuth the threds but i couldnt find something like that...
i hope anyone can help
Will Samsung repair that with Warranty?
Can i know why he disconnected his phone during using something with Odin?!
He made a Solid Brick he cant do anything else than Warranty or JTAG..
BlackRainX said:
Can i know why he disconnected his phone during using something with Odin?!
He made a Solid Brick he cant do anything else than Warranty or JTAG..
Click to expand...
Click to collapse
haha he moved so fast with the mouse and hit the cable to the phone... i dont know exactly...
1. what is JTAG?
2. are you 100% shore that its a compleat brick?
3. is there no unbrickable or something like that?
Oli28 said:
haha he moved so fast with the mouse and hit the cable to the phone... i dont know exactly...
1. what is JTAG?
2. are you 100% shore that its a compleat brick?
3. is there no unbrickable or something like that?
Click to expand...
Click to collapse
If after trying multiple things like removing battery and what not and the phone won't boot or enter download mode, yup, it's a complete brick
achillies400 said:
If after trying multiple things like removing battery and what not and the phone won't boot or enter download mode, yup, it's a complete brick
Click to expand...
Click to collapse
nice wait not really...
but cant change anything... its sad for the device!
does enyone know if samsung will repair that??
i hope so
Oli28 said:
nice wait not really...
but cant change anything... its sad for the device!
does enyone know if samsung will repair that??
i hope so
Click to expand...
Click to collapse
It's not the most correct thing to do (actually, not at all, it was your friend's fault entirely, also voiding the warranty), but your friend can tell them that the device began to heat while charging, he unpluged it and it died, sometimes it happens...
As for the JTAG you asked on the other post, it's a physical connector inside the cellphone used to write the flash memory, it involves opening the device, pinning some terminals and programming via PC, it's pretty common on embedded devices to load the program for the first time.
There is still a chance to get the phone back to its senses!
you will need 2 people to do this
read all 5 steps then only proceed!
1. Remove the battery.
2.Start odin in your pc.
3.connect the mobile to the pc using cable.
4.keep pressing the keys required to get in download mode. i.e. power+home+volume down key.
5.ask someone else to put the battery in your phone keeping the keys pressed!.
if every thing goes right Odin will detect the phone Flash it with a good rom you know which works! and never take out the cell from odin when its being flashed until odin says Success!
pankajkundalia said:
There is still a chance to get the phone back to its senses!
you will need 2 people to do this
read all 5 steps then only proceed!
1. Remove the battery.
2.Start odin in your pc.
3.connect the mobile to the pc using cable.
4.keep pressing the keys required to get in download mode. i.e. power+home+volume down key.
5.ask someone else to put the battery in your phone keeping the keys pressed!.
if every thing goes right Odin will detect the phone Flash it with a good rom you know which works! and never take out the cell from odin when its being flashed until odin says Success!
Click to expand...
Click to collapse
Won't work if the PIT wasn't completed therefore leaving the device void of a bootloader, but it's worth the try, you have nothing to lose...
Wow, nice will try today... I will get the phone... would get a free Pizza if i would make it work again! thank you guys for your answers. I will tell you what happend...
is there a how ti for jtag? Could Be the solution...
Sent from my Desire HD RUNNY using XDA App
How to JTAG:
You had to solder stuff, it's safer to try warranty
Omega Frost said:
How to JTAG:
You had to solder stuff, it's safer to try warranty
Click to expand...
Click to collapse
Thank you!
suddenly this with the battery didnt worked so im gona send it to the warraty....
And when they dont repair it for free or less than 50 $ I have to send it to the JTAG..
thank you guys for all your support
Afaik u never supposed 2 use pit options in odin for gs2 otherwise u end up with a brick anyway regardless if u remove the cable or not. perhaps read more and be more careful if u ever decide 2 flash again. i would not be happy with that friend lol.
Sent from my GT-I9100 using xda premium
So I was trying to root new Galaxy s2.. long story short, I think I hard bricked it.
The device won't power up; or at least the screen won't show anything.
I can't get to Download Mode.
Is there anyway I can save my new 400 dollar investment?
How are you trying to get into download mode ? Hold the volume down, home button and the power button at the same time. When you get the Samsung screen, release the power button but keep holding the volume down/home buttons until you get into download mode.
If you really can't get into download mode your options are:-
1) Get a jig. This would be your last chance to get into download mode before sending it off for repair.
2) Find someone near you who does JTAG repairs. This option will be cheaper than paying for Samsung to repair your phone.
3) Return the phone to Samsung. As you've tried to root the phone, there's a fair chance you'll end up paying for said repair as this voids your warranty. On the other hand you might be one of those people who get lucky and Samsung fixes your phone under warranty regardless. A roll of the dice essentially.
Edit - Remove your battery & leave it out for a minute or so before trying to get into download mode.
Or failing options 1 & 2 already suggested then perhaps option 2a..
Apply a current to the sim connectors under the battery and make sure it never evers boots again, Samsung won't know what's happened to it and will repair/replace FOC.
(I find an old laptop PSU minus connector plug usually applies enough current for this)
Hehehehe ;-) Damn that brought back memories Uridium. I used to do that with Sega Mega Drive cartridges. However, I'm not sure we should be suggesting same on here. Not exactly ethical and bordering on fraud tbh
uridium_uk said:
Or failing options 1 & 2 already suggested then perhaps option 2a..
Apply a current to the sim connectors under the battery and make sure it never evers boots again, Samsung won't know what's happened to it and will repair/replace FOC.
(I find an old laptop PSU minus connector plug usually applies enough current for this)
Click to expand...
Click to collapse
Looking at JIGS on Ebay, I'll probably get one from there.
So how would I use that?
Plug it in to get to Download Mode then take it out and plug in USB connection to my PC?
I'm still unaware of which correct firmware to put it, so this is so scary :[
uridium_uk said:
Or failing options 1 & 2 already suggested then perhaps option 2a..
Apply a current to the sim connectors under the battery and make sure it never evers boots again, Samsung won't know what's happened to it and will repair/replace FOC.
(I find an old laptop PSU minus connector plug usually applies enough current for this)
Click to expand...
Click to collapse
Haha I will try the JIG method first.
But thanks for the devious idea ;]
Yep. Look for "Samsung Galaxy S2 download mode jig" or something like that on eBay. Shouldn't be more than a few bucks. When you get it, make sure the phone is off, plug the jig in the usb port & if you're lucky the phone will boot into download mode. Yeah, once you're in download mode, remove the jig, plug a USB cable in/connect to your PC then flash your firmware of choice via Odin.
We can worry about which firmware to flash once you're able to get it to boot with a jig tho. Post back here when you get it & then we can work out which firmware to go with.
johnnysyeah said:
Looking at JIGS on Ebay, I'll probably get one from there.
So how would I use that?
Plug it in to get to Download Mode then take it out and plug in USB connection to my PC?
I'm still unaware of which correct firmware to put it, so this is so scary :[
Click to expand...
Click to collapse
MistahBungle said:
Yep. Look for "Samsung Galaxy S2 download mode jig" or something like that on eBay. Shouldn't be more than a few bucks. When you get it, make sure the phone is off, plug the jig in the usb port & if you're lucky the phone will boot into download mode. Yeah, once you're in download mode, remove the jig, plug a USB cable in/connect to your PC then flash your firmware of choice via Odin.
We can worry about which firmware to flash once you're able to get it to boot with a jig tho. Post back here when you get it & then we can work out which firmware to go with.
Click to expand...
Click to collapse
Thanks for your help! The JIG should arrive by Friday. Till then.. back to my iPhone 3G, yuck.
Hey I have an idea, why don't you tell us how you think you bricked your phone.
Because, for example, if you've flashed a bad Kernel then your phone may seem bricked (it has all the characteristics) but can be recovered by someone who knows what to do. Likewise, if you were flashing something with Odin and you had a sudden spasm attack and pulled the USB out, you've bricked your phone. Tell us what you did and we can give a proper reply.
EDIT: If the phone is only soft bricked and you can get into DL mode with a JIG, you go can it without one.
postfatal said:
Hey I have an idea, why don't you tell us how you think you bricked your phone.
Because, for example, if you've flashed a bad Kernel then your phone may seem bricked (it has all the characteristics) but can be recovered by someone who knows what to do. Likewise, if you were flashing something with Odin and you had a sudden spasm attack and pulled the USB out, you've bricked your phone. Tell us what you did and we can give a proper reply.
EDIT: If the phone is only soft bricked and you can get into DL mode with a JIG, you go can it without one.
Click to expand...
Click to collapse
Well, first I was using odin to root it by changing the kernel. But I think I was using the wrong version and then I got "firmware is wrong. Please select recovery mode in kies and try again."
Then I tried to put back 2.3.4 and that's where I think went wrong. I unplugged the phone because it was just stuck with Odin on for over 10 minutes.
Then now I can't even turn it on.
Sent from my ADR6400L using Tapatalk
If Odin hadn't finished its business and you unplugged your phone then yea, you've probably bricked it. Cases like these is why I never use Odin, its beta software which even the developers don't fully understand how it works. Even if through no fault of your own, Odin can fail, and that leaves you pretty well ****ed. Try the JIG, you may have unplugged it when it wasn't flashing something important, but yea, I'd start making up a really good excuse to get a new phone.
postfatal said:
If Odin hadn't finished its business and you unplugged your phone then yea, you've probably bricked it. Cases like these is why I never use Odin, its beta software which even the developers don't fully understand how it works. Even if through no fault of your own, Odin can fail, and that leaves you pretty well ****ed. Try the JIG, you may have unplugged it when it wasn't flashing something important, but yea, I'd start making up a really good excuse to get a new phone.
Click to expand...
Click to collapse
If the JIG is able to get it to go to download mode, would that mean for sure I can fix the phone?
And if the JIG cannot bring it to download mode, am I screwed with this phone?
If you do manage to get into download mode your phone can be saved otherwise yeah you are pretty much screwed
Sent from my GT-I9100 using Tapatalk
RorixRebel said:
If you do manage to get into download mode your phone can be saved otherwise yeah you are pretty much screwed
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
*crosses fingers* for the JIG then...
i just cant understand how people break their phones like this?
If you dont know what your doing theres a good reason not to flash your phone right there.
Saying that... i hope the jig works for you.
Vivasanti said:
i just cant understand how people break their phones like this?
If you dont know what your doing theres a good reason not to flash your phone right there.
Saying that... i hope the jig works for you.
Click to expand...
Click to collapse
I do all my rooting and modding just fine for my HTC Thunderbolt. I was being careless and wasn't thinking about this carefully yesterday.
This is why we have xda with all its great users and help.
I had problems with my sgs2 when i first got it and my problem was solved with a different usb cable. I was using a cheap usb cable and when i tried an original worked a treat.
Just a thought if ya get it yo power up again.
Sent from my GT-I9100 using XDA App
Unbrick without Jig
johnnysyeah said:
I do all my rooting and modding just fine for my HTC Thunderbolt. I was being careless and wasn't thinking about this carefully yesterday.
This is why we have xda with all its great users and help.
Click to expand...
Click to collapse
Well it might be possible to Unbrick your phone without Jig, but solution has not worked for 100% user, though it has worked for me(I'm not sure it was hard brick). So here are the steps:
1- Start Odin
2- Attach the USB cable to the PC (DO NOT ATTACH IT TO THE PHONE)
3- Press and hold "Volume up" and "home" buttons
4- Attach the USB cable to the phone while holding both buttons
5- The phone will enter in download mode
Just flash the stock kernel after that.
And don't forget to THANK me if it works
sumitpathak said:
Well it might be possible to Unbrick your phone without Jig, but solution has not worked for 100% user, though it has worked for me(I'm not sure it was hard brick). So here are the steps:
1- Start Odin
2- Attach the USB cable to the PC (DO NOT ATTACH IT TO THE PHONE)
3- Press and hold "Volume up" and "home" buttons
4- Attach the USB cable to the phone while holding both buttons
5- The phone will enter in download mode
Just flash the stock kernel after that.
And don't forget to THANK me if it works
Click to expand...
Click to collapse
I'd tried this before, but no luck.
In fact, that was the only way I was able to get to download mode.
But thanks for your advice
Sent from my ADR6400L using Tapatalk
johnnysyeah said:
I'd tried this before, but no luck.
In fact, that was the only way I was able to get to download mode.
But thanks for your advice
I dont really understand this as download mode requires Vol Down + Home + Pwr
Vol up is for recovery .
jje
Click to expand...
Click to collapse
Ok so i was in my flash happy mood earlier today..
I saw that ICS slim was updated and was going to try that, well i had ICZen on my phone at the time and tried to flash Slim, well blah blah, it didnt work.. The op told me to flash from a rom that had cm9 (iczen has glitch) so i flashed Lithium MIUI--went back into recovery and started to wipe.. i wiped everything.. So i went to go flash ics slim, and as soon as i pressed 'Yes, install..' it was installing for a very short bit, then all a sudden a reboot and got stuck on the rainbow screen...
I cannot go back into recovery, but i can go into download mode.. BUT this is where the kicker is......
My computer doesnt recognize my device... ive installed driver after driver to get it to recognize. Well, no avail
Even tried installing the drivers on 6 other friends computers (at my college) and all of them still didnt recognize my device..... SMDH.. been trying to fix this all day and im pissed.
Any ideas what to do? Hate to go out and buy another phone......
And before yall say 'you cant flash miui and then go straight to ics, you have to odin' --- No, i did it all the time.. This time something went wrong and idk what
Wow, 158 views and no replies..
Guess i did permanently brick it.. ok
If you can get in to download mode, you're not bricked.
I've read/heard that since our ICS roms are built off of Nexus code, you need to install the nexus drivers. Have you tried doing that? Also, are you sure it's not a bad cable? Try another samsung cable (if you can get a hold of one) to be sure.
dpaul007 said:
If you can get in to download mode, you're not bricked.
I've read/heard that since our ICS roms are built off of Nexus code, you need to install the nexus drivers. Have you tried doing that? Also, are you sure it's not a bad cable? Try another samsung cable (if you can get a hold of one) to be sure.
Click to expand...
Click to collapse
yes, ive installed the nexus drivers too.. im positive its not a bad cable, ive used it on my computer before hand.. and yea, ive tried another cable as well..
I remember experiencing something like this a while back. i softbricked, could enter download mode, but the computer would not pick up my phone. i dont remember an exact solution, i just remember downloading all sorts of drivers and eventually i got it to pick up.
matholomus said:
Wow, 158 views and no replies..
Guess i did permanently brick it.. ok
Click to expand...
Click to collapse
as far as views:replies, you have to realize that even though you are in panic mode (weve all been there, so we know how you feel), that doesnt necessarily mean people are automatically going to have an answer for you. in this type of situation, its virtually impossible for anyone to tell you an exact solution (if there is one) unless they are sitting right next to you.
TopShelf10 said:
I remember experiencing something like this a while back. i softbricked, could enter download mode, but the computer would not pick up my phone. i dont remember an exact solution, i just remember downloading all sorts of drivers and eventually i got it to pick up.
as far as views:replies, you have to realize that even though you are in panic mode (weve all been there, so we know how you feel), that doesnt necessarily mean people are automatically going to have an answer for you. in this type of situation, its virtually impossible for anyone to tell you an exact solution (if there is one) unless they are sitting right next to you.
Click to expand...
Click to collapse
Wow really? Damn.. remember what kind of drivers? ive used the samsung usb drivers and nexus s drivers..
But yea, i guess ur right.. sorry for the other post, i was (and still am a little) mad at the time
Try installing kies or kies mini, it did the trick for me when i was in a similar situation
Sent from my SGH-T959 using Tapatalk
matholomus said:
Wow really? Damn.. remember what kind of drivers? ive used the samsung usb drivers and nexus s drivers..
But yea, i guess ur right.. sorry for the other post, i was (and still am a little) mad at the time
Click to expand...
Click to collapse
i honestly wish i could tell you exactly, this was a whiiile back, prob over a year.
all i remember was a lot of installing/uninstalling/reinstalling drivers, rebooting comp/phone, unplugging/replugging....it seemed like there was no hope so all i could do all day was fiddle and just hope and pray that i would do something right and the phone would read
im not going to lie though, it does sound pretty bad that youve tried it on multiple computers. that means your possible problems are (from most to least severe):
1. Busted USB port
2. Wrong drivers installed
3. Malfunctioning chord
Although i WILL say: make sure all of your USB connections are free of lint, gunk, etc. I know this sounds like one of those stupid, default troubleshooting steps, and i always looked down my nose at it. however there was a point in time the the comp wouldnt pick up my phone. i tried eeeeverything to remedy it and nothing was working. sure enough, i looked at the standard usb connector on my charging chord and it was FILLED with pocket lint. once i picked it out, BAM good as new!!
bfranklin1986 said:
Try installing kies or kies mini, it did the trick for me when i was in a similar situation
Sent from my SGH-T959 using Tapatalk
Click to expand...
Click to collapse
Did kies as well lol.. didnt work.. when it told me to connect my mobile device, i did. but it didnt register
TopShelf10 said:
i honestly wish i could tell you exactly, this was a whiiile back, prob over a year.
all i remember was a lot of installing/uninstalling/reinstalling drivers, rebooting comp/phone, unplugging/replugging....it seemed like there was no hope so all i could do all day was fiddle and just hope and pray that i would do something right and the phone would read
im not going to lie though, it does sound pretty bad that youve tried it on multiple computers. that means your possible problems are (from most to least severe):
1. Busted USB port
2. Wrong drivers installed
3. Malfunctioning chord
Although i WILL say: make sure all of your USB connections are free of lint, gunk, etc. I know this sounds like one of those stupid, default troubleshooting steps, and i always looked down my nose at it. however there was a point in time the the comp wouldnt pick up my phone. i tried eeeeverything to remedy it and nothing was working. sure enough, i looked at the standard usb connector on my charging chord and it was FILLED with pocket lint. once i picked it out, BAM good as new!!
Click to expand...
Click to collapse
i literally restarted my computer 7-9 times from uninstalling and installing driver after driver.. been doing this all morning.. no class, lol thank god. so im in the dorm getting my nerd on..
tried it again on 2 other computers (installing drivers and what not) didnt work.. Tried 2 other usb cables, didnt work..
Tried ur method of cleaning usb ports, didnt work lol.. (i blew in them/phone too)..
im currently on C.L. lookin for a new phone, I WOULD hate to have to leave the vibrant community.. yall been great with roms/drama LOL..
im slowly losing hope on this .. but im continuing to try and fix this
Couple of things. Why don't you go over to the Dev section and download the AIO toolbox. Tiber I think has a link in one of the last posts that should still be working. It has all the pit/tar files, drivers (I know, I know), Odin and is very handy. Don't forget to make usre you have the .net files too.
Then try this
Make sure you have ODIN OPEN with admin privileges!
1.) Take off your back cover, remove your sim & mirco sd card.
2.) Remove your battery.
Make sure you have the USB plugged into your PC but NOT your phone!
3.) Hold the volume buttons.
4.) Put the battery in.
5.) Put the USB in.
You don't necessarily need the download mode image to be present. As long as you are getting the COM ID to light up yellow in ODIN, just flash back to stock like normal.
Click to expand...
Click to collapse
If all else fails, just keep trying. It boots up to Download mode so it is salvagable and not hard bricked. If you do end up finding a new phone on CL and want to donate you Vibrant, i am looking for one to work on some things with.
Woodrube said:
Couple of things. Why don't you go over to the Dev section and download the AIO toolbox. Tiber I think has a link in one of the last posts that should still be working. It has all the pit/tar files, drivers (I know, I know), Odin and is very handy. Don't forget to make usre you have the .net files too.
Then try this
If all else fails, just keep trying. It boots up to Download mode so it is salvagable and not hard bricked. If you do end up finding a new phone on CL and want to donate you Vibrant, i am looking for one to work on some things with.
Click to expand...
Click to collapse
thanks... but the aio toolbox is not going to the download link for me. the download link is down or something.
i did download the .net files tho, jus cant download the toolbox
So the one Rapidshare from Tiber isn't working? What about the one from OldeCrow 2 posts up. If neither of them are working, I can get it to you later on tonight when I get home from work.
Regardless, if you have the drivers and have Odin installed, try the tricks in my earlier post and see it works that way. Panic mode is probably not deep set in, don't worry we'll get it on.
When you say yours (and 6 others) don't recognize the phone, are you talking about Mass Storage mode or do all 6 of your friends have Odin installed on their computers? Might seem like a BS question and I am sorry about that but it is a one or the other type situation. It will be in download mode OR mass storage.
Can you boot into recovery by chance?
Depending on what bootloader you have it will be (Froyo) Vol+/- and power or (GB) Vol+ and Power. Also not to sound noob-ish but just bc you have a GB ROM doesnt mean you have GB bl's. Dealt with that with someone else this week and fought me tooth and nail over it.
if you have clockwork mod installed you can put a rom on your SD card through your computer, wipe your phone and then flash the from with a full wipe.
Sent from my HTC Desire HD using xda premium
That is what I am getting at.
If he can get into CWR then he can mount the phone to the computer in Mounts and Storage, put a simple 2.2 ROM on there and get it to boot up so that it works. then figure out the driver thing later on once we can get it to fully boot up.
Woodrube said:
So the one Rapidshare from Tiber isn't working? What about the one from OldeCrow 2 posts up. If neither of them are working, I can get it to you later on tonight when I get home from work.
Regardless, if you have the drivers and have Odin installed, try the tricks in my earlier post and see it works that way. Panic mode is probably not deep set in, don't worry we'll get it on.
When you say yours (and 6 others) don't recognize the phone, are you talking about Mass Storage mode or do all 6 of your friends have Odin installed on their computers? Might seem like a BS question and I am sorry about that but it is a one or the other type situation. It will be in download mode OR mass storage.
Can you boot into recovery by chance?
Depending on what bootloader you have it will be (Froyo) Vol+/- and power or (GB) Vol+ and Power. Also not to sound noob-ish but just bc you have a GB ROM doesnt mean you have GB bl's. Dealt with that with someone else this week and fought me tooth and nail over it.
Click to expand...
Click to collapse
cant reboot into the bootloader nor recovery.. the only thing i can do is download mode..
I have the GB bootloader.. im sure of it lol
and yes i installed odin and all the files on all 6 of my friends computer.. none of them worked
davil544 said:
if you have clockwork mod installed you can put a rom on your SD card through your computer, wipe your phone and then flash the from with a full wipe.
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
if i could get into recovery, i wouldnt be posting something like this LOL.. ive unbricked my phone before (that was when my comp recognized the device, now its not)
My device is not recognized by the computer, so my sd cards dont show on the comp
Woodrube said:
So the one Rapidshare from Tiber isn't working? What about the one from OldeCrow 2 posts up. If neither of them are working, I can get it to you later on tonight when I get home from work.
Regardless, if you have the drivers and have Odin installed, try the tricks in my earlier post and see it works that way. Panic mode is probably not deep set in, don't worry we'll get it on.
Click to expand...
Click to collapse
oh and i did do the little tricks you said, i found that op..
that person had the same problem as me and everyone tried to help, they gave him/her links and everything.. i followed with the links too, and just like that person, none of them worked for me either
saw the download link that oldecrow posted.. its working.. downloading now
Ok. Keep trying once it is downloaded and let us know how it is going. I am getting ready to leave work soon, so I won't be on until later tonight but there are plenty of others that can help.
There's also the One-Click Vibrant DeBrick from Adam Outler. I've used it on my netbook on phones with your identical problem and its never failed yet.
Also, Heimdall on Ubuntu will flash it no problem, it does NOT need drivers like Windows does...
http://www.glassechidna.com.au/products/heimdall/
Sent from my SGH-T959 using XDA App
Up and running!!!!!!!!!!!!!!!1
NEVER WOULD HAVE THPOUGHT!! (well i did but...) anyways im up and running now!!!! Wow, idk what happened... it just started working.. i plugged it in and odin recognized it!!..
im on 2.1 again lol.. so all i need to do is go back into recovery and reinstall packages right?
Did i lose root? i forgot
I'll start out that I'm new to android, been an avid blackberry user that just purchased my note 2. I followed the casual root application, and unlocked and rooted my device. I went to install cm 10.2 mod on my device after wiping the device in development mode then proceeded to install from sdcard and it failed. Now my device will not respond to either download mode or development mode or power on in any way (including using a charger and removing and replacing the battery). I'm kind of stuck and not sure how to approach the correct solution to get my device back up and running. I did make sure that the cm mod I downloaded was for my specific device. Is it possible that maybe the root/unlock method failed and thats where I went wrong when installing the cm mod? I also get no response when the device is plugged into my pc. So its not being read by odin currrently.
Since it appears I have hard bricked my device, not quite sure what steps I can do to recover. I get no power to the device in any situation, I've read online about jtag, if anyone could point me in a direction it would be helpful. Thanks in advance.
Sorry forgot to mention this was a verizon branded note 2
achiquitachaser said:
I'll start out that I'm new to android, been an avid blackberry user that just purchased my note 2. I followed the casual root application, and unlocked and rooted my device. I went to install cm 10.2 mod on my device after wiping the device in development mode then proceeded to install from sdcard and it failed. Now my device will not respond to either download mode or development mode or power on in any way (including using a charger and removing and replacing the battery). I'm kind of stuck and not sure how to approach the correct solution to get my device back up and running. I did make sure that the cm mod I downloaded was for my specific device. Is it possible that maybe the root/unlock method failed and thats where I went wrong when installing the cm mod? I also get no response when the device is plugged into my pc. So its not being read by odin currrently.
Since it appears I have hard bricked my device, not quite sure what steps I can do to recover. I get no power to the device in any situation, I've read online about jtag, if anyone could point me in a direction it would be helpful. Thanks in advance.
Click to expand...
Click to collapse
I guess no one has an idea of where to go with this now?
achiquitachaser said:
I guess no one has an idea of where to go with this now?
Click to expand...
Click to collapse
connecting to pc does your note responds or pc shoes something
remove your battery connect to pc and go to download mode by pressing the button combo if odin shows a port
and you are connected then you are saved if not I guess its tym for service center
anyways try
P.S be sure that you have latest drivers installed on pc and use the original usb cable for conecting
sangalaxy said:
connecting to pc does your note responds or pc shoes something
remove your battery connect to pc and go to download mode by pressing the button combo if odin shows a port
and you are connected then you are saved if not I guess its tym for service center
anyways try
P.S be sure that you have latest drivers installed on pc and use the original usb cable for conecting
Click to expand...
Click to collapse
Thanks for the reply sangalaxy, like I mentioned the phone does not respond at all for download mode, not recognized by Odin or showing any power when connected to a charger. Hence why I was thinking its hard bricked.
I'm not sure if I can send it to samsung, since I bought the phone off craigslist.
achiquitachaser said:
Thanks for the reply sangalaxy, like I mentioned the phone does not respond at all for download mode, not recognized by Odin or showing any power when connected to a charger. Hence why I was thinking its hard bricked.
I'm not sure if I can send it to samsung, since I bought the phone off craigslist.
Click to expand...
Click to collapse
yea sometimes it will not recognize anything and will not show on screen but will work silently
did you tried connecting it to pc without battery as I said and go to download mode by pressing buttons may be odin will recognize
if not you don't have any choice but go to samsung
Your right I didn't fully read your post to try those instructions, unfortunately it didn't work but thank you for the help. It is definitely appreciated. I think I have found someone off eBay with a good reputation for jtagging android devices that might be a solution.
achiquitachaser said:
Your right I didn't fully read your post to try those instructions, unfortunately it didn't work but thank you for the help. It is definitely appreciated. I think I have found someone off eBay with a good reputation for jtagging android devices that might be a solution.
Click to expand...
Click to collapse
ok friend hope it gets fixed