hello together I have just made times ClockworkMod recovery touch and tested. it works perfeckt also omnibus free funktoniert touch.
I have the recovery insterliert Sun
dd if = / sdcard / recovery.img of = / dev/block/mmcblk0p21
here have the link to the recovery.img
have fun
Can anyone confirm this as working? Or some screens please...
Sent from my GT-I8190 using xda app-developers app
wait i try it now
And also would it be possible to make a cwm flashable zip?
Sent from my GT-I8190 using Tapatalk 2
Key Mapping for Recovery start
Can someone dont forget to implement Key mapping for starting the NEW recovery Mode.
Im proudly a happy user of this great phone but a recovery to start from off situation were pretty cool.
An app or a tool for erasing download count and others to be tweaked were also very helpfull.
Best regards
not work is bootlop to recovery is some like my build
Same here. Phone keeps booting into recovery only.
blackknightavalon said:
Same here. Phone keeps booting into recovery only.
Click to expand...
Click to collapse
I am running it but now I have no more csc and my baseband is gone and I still had problems with the touchpad. I have but one thing to say I do not find it as good as the CWM without touch, I just on the back. without touch it, because now that everything is out in the old baseband is still XXXX
someone looking like maybe I can restore baseband version???
jony1512 said:
I am running it but now I have no more csc and my baseband is gone and I still had problems with the touchpad. I have but one thing to say I do not find it as good as the CWM without touch, I just on the back. without touch it, because now that everything is out in the old baseband is still XXXX
someone looking like maybe I can restore baseband version???
Click to expand...
Click to collapse
try this
1 - flash stock recovey
2- flash non rooted stock rom from samobile
3-install CWM and boot into recovery
4-wip all data /cache
5-go advance and format system cache preload and reboot to download mode
6- install stock recovery again
7-install stok rom again
that all
spawk said:
try this
1 - flash stock recovey
2- flash non rooted stock rom from samobile
3-install CWM and boot into recovery
4-wip all data /cache
5-go advance and format system cache preload and reboot to download mode
6- install stock recovery again
7-install stok rom again
that all
Click to expand...
Click to collapse
I'll try that tomorrow a try. beautiful evening even
Great news everybody!
We have official CWM available for download
ClockworkMod Recovery 6.0.2.7
ClockworkMod Touch Recovery 6.0.2.7
Just flash it in cwm? And has it been tested?
Sent from my GT-I8190 using xda premium
Tested by me, they both work great.
---------- Post added at 10:34 PM ---------- Previous post was at 10:32 PM ----------
Yes flash my attachments via CWM
Benzonat0r said:
Tested by me, they both work great.
---------- Post added at 10:34 PM ---------- Previous post was at 10:32 PM ----------
Yes flash my attachments via CWM
Click to expand...
Click to collapse
Benz? Are these different of the ones found in the thread started by xd.bx?
I guess you downloaded them from the official cwm site?
Soz for asking all theae questions but it's pretty interesting!
Not really no, but the size is different they're bigger I'm assuming because of some minor bug fixes.
Yes I've downloaded them from http://www.clockworkmod.com/rommanager
thanks
Sent from my GT-I8190 using xda app-developers app
Yeah well don't say thanks, hit thanks.
R: CWM ClockwordMod Recovery Touch
thank you very much for this thread cwm gives me more security I would say finally, now wait just a great CyanogenMod
Inviato dal mio GT-I8150 con Tapatalk 2
hi...im quite new to samsung....can someone point me how to install this? i am used to 4ext recovery....i am going to root it today.....
is it the same procedure as flashing img file via adb fatsboot?
AW: CWM ClockwordMod Recovery Touch
nazri5363 said:
hi...im quite new to samsung....can someone point me how to install this? i am used to 4ext recovery....i am going to root it today.....
is it the same procedure as flashing img file via adb fatsboot?
Click to expand...
Click to collapse
You ll need root access and the app superuser!
Get the .img file from first post.
Get an terminal emulator from market and open it.
We ll flash it via dd on terminal.
Move the .img to internal sd via file explorer.
In terminal first type su.
The command for flashing is in the first post. Begins with dd.
All right?
Sent from my GT-I8190 using xda app-developers app
Related
First, I would like to apologize for my bad English (If I have spoken something wrong / using wrong grammar)
And I would like to warn you that:
***This will increase the flash counter!
***You cannot boot into CWM by pressing the (vol up + power + home) buttons [I don't know why, don't ask me]
***I'm not responsible if you FAIL to ROOT / BRICK your device / CANNOT OPEN
CORRECTION: THIS IS JUST ANOTHER WAY TO ROOT S3 MINI, TAKE IT, OR IGNORE IT~~
Guys, I just bought an S3 mini and I found out that the root methods are so few...
For example: Flash pre-rooted ROM, seems is the best way and safest way to have a ROOT-ED system...
Anyway, I have figured an hour and I tried some "tricks" to ROOT the S3 MINI easily with the LATEST FRRMWARE!
I found out 1 thing is when you flash any S3 MINI firmware via ODIN, the firmware DOES NOT including the STOCK RECOVERY
Ok back to the topic, these are the ways that I figured out and used them to ROOT my S3 MINI with LATEST FIRMWARE! (Android 4.1.2 XXAMA2)
Just follow my instructions, I have tested them and they worked...
Step 1: Put the ROOT zip file into sdcard / external sdcard. ***Download the ROOT zip file from below attachment***
Step 2: Boot to DOWNLOAD MODE, flash CWM 6.0.2.8 via ODIN's PDA, UN-TICK "Auto Reboot"
***I have made an ODIN FLASHABLE CWM (6.0.2.8)***Download it from the attachment below***
Step 3: Download any / latest S3 MINI firmware from http://samsung-updates.com/device/?id=GT-I8190
Step 4: Boot into DOWNLOAD MODE again! Flash the firmware that you have downloaded... This time tick the "Auto Reboot"
Step 5: The device will auto reboot into CWM after you have flashed the firmware! When it boots into CWM, click "Install un-trusted zip" first, after that browse and flash the ROOT file via CWM!
REBOOT YOUR DEVICE, IF YOU FIND OUT THAT THE MENU & BACK KEYS CANNOT CLICK, JUST REBOOT YOUR DEVICE AGAIN!
CONGRATULATION! YOU HAVE ROOTED YOUR S3 MINI WITH LATEST FIRMWARE AND LATEST SuperSU!
If you failed to boot into CWM, just flash the firmware again and remember tick the "Auto Reboot"!
The phone will automatically boot into CWM again and all you need to do next is to flash the ROOT zip file!
You are welcome to share your ideas / experiences after using my way...
Post your questions if you have, I'll try to help you... If I may...
TRY MY WAY OUT! :victory::laugh::good:
... your new solution for root isn´t new .... and not recommend because of enrease the custom binary count .....
and nice to see that you are able to share my cwm 6.0.2.8 touch build but not to click thanks in my thread...
enox.co said:
... your new solution for root isn´t new .... and not recommend because of increase the custom binary count .....
and nice to see that you are able to share my cwm 6.0.2.8 touch build but not to click thanks in my thread...
Click to expand...
Click to collapse
I apologize, I have used your CWM zip file converted to tar file :good: I'm so thankful that I can use your post as one of my references :laugh:
Yes, it does increase the custom binary count...
And I have not found a way to flash back the stock recovery...
Maybe is not "new", is just "another" way to ROOT the S3 MINI :angel:
takumibunta said:
Yes, it does increase the custom binary count...
And I have not found a way to flash back the stock recovery...
Maybe is not "new", is just "another" way to ROOT the S3 MINI :angel:
Click to expand...
Click to collapse
This is like the oldest method in the book. It used to work with other devices, but samsung tightened security on this one.
As for the original recovery, here you go.
tys0n said:
This is like the oldest method in the book. It used to work with other devices, but samsung tightened security on this one.
As for the original recovery, here you go.
Click to expand...
Click to collapse
I'm just a "beginner" flasher~
I apologize~
Thanks for the stock recovery man! :fingers-crossed: It is very useful...
R: Root s3 mini with latest firmware! (new way!)
but cwm is flashed with odin?
It's version touch or normal?
Inviato dal mio GT-I8150 con Tapatalk 2
ponemania82 said:
but cwm is flashed with odin?
It's version touch or normal?
Inviato dal mio GT-I8150 con Tapatalk 2
Click to expand...
Click to collapse
It's TOUCH version by enox.co :good::laugh:
Yes flash it via ODIN...
I know this may sound stupid but can anyone tell me if Stock Recovery be flashed with Odin? An answer would be appreciated.
Sent from my GT-I8190 using xda premium
kicker63 said:
I know this may sound stupid but can anyone tell me if Stock Recovery be flashed with Odin? An answer would be appreciated.
Sent from my GT-I8190 using xda premium
Click to expand...
Click to collapse
The stock recovery is img file, it's cannot flash via ODIN
I can make an ODIN flashable stock recovery, but not now because I'm going to sleep
Or before I post up, someone who can share it please upload
Will Odin flashable stock recovery increase binary count.
Sent from my GT-I8190 using xda premium
kicker63 said:
Will Odin flashable stock recovery increase binary count.
Sent from my GT-I8190 using xda premium
Click to expand...
Click to collapse
Yes it will.
Its better to make a cwm-flashable stock recovery in that case.
I think I've seen one around here somewhere..
Thanks just wanted too be sure.
Sent from my GT-I8190 using xda premium
kicker63 said:
Will Odin flashable stock recovery increase binary count.
Sent from my GT-I8190 using xda premium
Click to expand...
Click to collapse
I'm not sure for stock recovery... Anyone?? :highfive:
takumibunta said:
I'm not sure for stock recovery... Anyone?? :highfive:
Click to expand...
Click to collapse
Have a read here.
Another trick for accessing recovery menu is via command prompt and android-sdk tools installed on PC.
Just navigate to Android folder with debugging mode turned on on phone and type: adb reboot recovery -> voila
Also let me mention that I managed to root and SIM unlock 8190N (NFC model) on latest 4.1.2 JB using your tutorial and Z3X box (USB + UART cable)
1) Flash the Le Fleur ROM via ODIN (this will enable the "three button recovery boot").
2) Flash whatever rooted ROM you want via ODIN (the "three button recovery boot" combo WILL STICK).
3) Install Triangle Away (Infected_ was one of the testers and it's been working for a couple days now).
blackknightavalon said:
1) Flash the Le Fleur ROM via ODIN (this will enable the "three button recovery boot").
2) Flash whatever rooted ROM you want via ODIN (the "" combo WILL STICK).
3) Install Triangle Away (Infected_ was one of the testers and it's been working for a couple days now).
Click to expand...
Click to collapse
In my [HOW-TO]Enable three button combo[recovery] there is a much easier way to gain three button recovery boot, without need to download and flash the whole firmware. Only 2mb download
Guys the issue i am always having is when i try to flash the file via Odin i cant cause ive got two yellow folders? ive zipped them but odin doesnt find them? what am i doing wrong pls?
THIS IS METHOD I USED AND IT IS 100 percent working. FULLY TESTED BY ME. However, I installed Super SU before trying this as I was rooting the device by different methods and found this most easy. Installing SuperSU from market before doing these steps is not required.
METHOD
This should work on both galaxy star. S5282 and S5280
Download CWM recovery
Download Odin
Download Super SU
Firstly, boot into odin mode by turn off your phone and wait 10 seconds. This is to ensure your phone has completely switched off.
Hold down power+volume down+home key. A screen will come asking you to continue. Press voume up key to continue.
Open odin as administrator and then click pda and choose recovery file downloaded from attachment. You will have to unzip the odin and recovery. Sometimes Odin wouldnot show files on desktop so make sure recovery is in DRIVE:/ANY NAME/ RECOVERY.TAR
Flash it by clicking start.
The phone will restart.
Switch off phone again. This time boot into recovery by pressing this combination. Hold down power+volume up+home key You may leave power key after you see model number.
Choose flash zip via recovery and choose SuperSU.zip
Restart phone after flashing the zip
YOU ARE ROOTED WITH CUSTOM RECOVERY. ENJOY
Update SuperSU from market if needed
ODIN FLASHABLE FILES FOR SAMSUNG
http://samsung-updates.com/
GIVE PROPER CREDITS IF USING MY RECOVERY AND TAKE PERMISSION BEFORE DOING SO.
did you built the CWM ?? or some one built it mention everything about it devv..
Thanks bro, its nice to have a working cwm for our Star.
Chirtagh said:
did you built the CWM ?? or some one built it mention everything about it devv..
Click to expand...
Click to collapse
The CWM has been ported and I did the work for that!
atocruz said:
Thanks bro, its nice to have a working cwm for our Star.
Click to expand...
Click to collapse
Enjoy mate!
Hnk1 said:
The CWM has been ported and I did the work for that!
Enjoy mate!
Click to expand...
Click to collapse
Well thats good :good:
And any other confirmed it working??
Its booting for me
Its going to be LEGEND---wait for it----DARY!-Barney Stinson now Free
---------- Post added at 05:51 PM ---------- Previous post was at 05:50 PM ----------
Although havent tested installing or mounting zips
Its going to be LEGEND---wait for it----DARY!-Barney Stinson now Free
Ironman38102 said:
Its booting for me
Its going to be LEGEND---wait for it----DARY!-Barney Stinson now Free
---------- Post added at 05:51 PM ---------- Previous post was at 05:50 PM ----------
Although havent tested installing or mounting zips
Its going to be LEGEND---wait for it----DARY!-Barney Stinson now Free
Click to expand...
Click to collapse
i ve modded systemui will flash and update it you ..
Bootloop bro don't know wat went wrong?
used the script from uot kitchen...
Logcat?
***Its going to be LEGEND---wait for it----DARY!-Barney Stinson*** now Free
---------- Post added at 08:33 PM ---------- Previous post was at 08:32 PM ----------
Do a adb logcat>logcat.txt
***Its going to be LEGEND---wait for it----DARY!-Barney Stinson*** now Free
Ironman38102 said:
Logcat?
***Its going to be LEGEND---wait for it----DARY!-Barney Stinson*** now Free
---------- Post added at 08:33 PM ---------- Previous post was at 08:32 PM ----------
Do a adb logcat>logcat.txt
***Its going to be LEGEND---wait for it----DARY!-Barney Stinson*** now Free
Click to expand...
Click to collapse
until unless the script worked it would have not boot looped. .
Chirtagh said:
until unless the script worked it would have not boot looped. .
Click to expand...
Click to collapse
Doing logcat would tell what happened and why.
Its going to be LEGEND---wait for it---DARY-Barney Stinson
Ironman38102 said:
Doing logcat would tell what happened and why.
Its going to be LEGEND---wait for it---DARY-Barney Stinson
Click to expand...
Click to collapse
and it has mounting probs like mounting USB STORAGE and mounting sdcard
Chirtagh said:
and it has mounting probs like mounting USB STORAGE and mounting sdcard
Click to expand...
Click to collapse
I think the mountpoints arent setup properly. Untill the devs dont fix it I suggest you to switch back to jhanras cwm5
Sent from my GT-S5282 using xda app-developers app
CWM & custom roms
I tried flashing a custom ROM, but it fails on an assertion about dvice == mintss.
I looked in the zip, and insiode build.prop there is mintss.
What is CWM expecting?
How can I debug this?
Thank you
canne said:
I tried flashing a custom ROM, but it fails on an assertion about dvice == mintss.
I looked in the zip, and insiode build.prop there is mintss.
What is CWM expecting?
How can I debug this?
Thank you
Click to expand...
Click to collapse
U need to go to updater-script and build prop and put mint not mintss.
Sent from my GT-S5282 using xda app-developers app
I extracted the 2 files, modified mintss with mint, repacked them (with the zip command), but now I get:
script aborted (no error message)
[...]
(Status 7)
Unfortunately does not work properly there is a problem with your recovery you ..
Detail
I've installed a copy Stock and then you make a factory reset does not happen the problem you have installed your recovery you .. Then you make a factory reset stops on the word Samsung and re-entry once again went to the recovery and you make a factory reset, Restart, and the same problem!!
I hope to resolve this problem in the near
Please do not inbox me. Write in the forum
Downman said:
Unfortunately does not work properly there is a problem with your recovery you ..
Detail
I've installed a copy Stock and then you make a factory reset does not happen the problem you have installed your recovery you .. Then you make a factory reset stops on the word Samsung and re-entry once again went to the recovery and you make a factory reset, Restart, and the same problem!!
I hope to resolve this problem in the near
Click to expand...
Click to collapse
Downman said:
http://forum.xda-developers.com/showthread.php?t=2474165
Unfortunately does not work properly there is a problem with your recovery you ..
Detail
I've installed a copy Stock and then you make a factory reset does not happen the problem you have installed your recovery you .. Then you make a factory reset stops on the word Samsung and re-entry once again went to the recovery and you make a factory reset, Restart, and the same problem!!
I hope to resolve this problem in the near
Click to expand...
Click to collapse
Tell me your model number with firmware version. Also, are you following the steps in correct order ?
Hnk1 said:
Please do not inbox me. Write in the forum
Tell me your model number with firmware version. Also, are you following the steps in correct order ?
Click to expand...
Click to collapse
Yes followed all the steps
AP: S5282XXAMEA
CP: S5282XXAME3
CSC: S5282OJVAME1
I tried other roms and the result was the same
After factory reset the device refuses access to the system
Do I experience again?
And I wish you specify the file before you experimenter exactly
+
Have you experience re-work factory settings after installing Recovery?
Downman said:
Yes followed all the steps
AP: S5282XXAMEA
CP: S5282XXAME3
CSC: S5282OJVAME1
I tried other roms and the result was the same
After factory reset the device refuses access to the system
Do I experience again?
And I wish you specify the file before you experimenter exactly
+
Have you experience re-work factory settings after installing Recovery?
Click to expand...
Click to collapse
Well it seems like you only need to clear the cache of your phone. Turn off your phone and then go into recovery by using voulume+power+home.
Then wipe data and dalvik cache in recovery menu and restart your phone. Be patient, it should reboot. Wait ten minutes, if that doesnot work I will send you further instructions.
So I used ROM manager to install CWM recovery 6.x.x.x on a brand new, fresh stock install. The app says that CWM is installed on my system. Yet when I boot into recovery it takes me to the Android System Recovery 3e. Any ideas what's going on?
Edit: I have root access.
griffsterb said:
So I used ROM manager to install CWM recovery 6.x.x.x on a brand new, fresh stock install. The app says that CWM is installed on my system. Yet when I boot into recovery it takes me to the Android System Recovery 3e. Any ideas what's going on?
Edit: I have root access.
Click to expand...
Click to collapse
Try using Flashify from the Play Store to flash a recovery. For some reason there's been issues with ROM Manager and many have gotten by this by using Flashify from what I've seen.
ROM manager may not be Lokifying the recovery or something I'm not entirely sure. Something going on there though
Sent from my SCH-I545 using Tapatalk
griffsterb said:
So I used ROM manager to install CWM recovery 6.x.x.x on a brand new, fresh stock install. The app says that CWM is installed on my system. Yet when I boot into recovery it takes me to the Android System Recovery 3e. Any ideas what's going on?
Edit: I have root access.
Click to expand...
Click to collapse
You didn't mention what build you are on.
Sent from my NCC-1701 using Tapatalk 4
Very true lol I was going between this thread and another where the op did say they were on mdk.... so my fault for not making sure in this thread
Sent from my SCH-I545 using Tapatalk
---------- Post added at 08:28 AM ---------- Previous post was at 08:20 AM ----------
Although another post this op has States he's on MDK. So we should be good!
Sent from my SCH-I545 using Tapatalk
Thanks guys. I am on MDK. I ended up trying GooManager and it properly installed TWRP, so I just went with that.
TeamWin is proud to present TWRP 2.8.0.0 for the Samsung Galaxy Note 2 (Verizon)!... located in original development
https://goo.im/devs/OpenRecovery/t0ltevzw/?page=2#collapse30http://https://goo.im/devs/OpenRecovery/t0ltevzw/?page=2#collapse30
athack said:
TeamWin is proud to present TWRP 2.8.0.0 for the Samsung Galaxy Note 2 (Verizon)!... located in original development
https://goo.im/devs/OpenRecovery/t0ltevzw/?page=2#collapse30http://https://goo.im/devs/OpenRecovery/t0ltevzw/?page=2#collapse30
Click to expand...
Click to collapse
There is already an official thread here for TWRP http://forum.xda-developers.com/showthread.php?t=2045829.
sorry just thought i was helping out...
DreamFX said:
There is already an official thread here for TWRP http://forum.xda-developers.com/showthread.php?t=2045829.
Click to expand...
Click to collapse
athack said:
TeamWin is proud to present TWRP 2.8.0.0 for the Samsung Galaxy Note 2 (Verizon)!... located in original development
https://goo.im/devs/OpenRecovery/t0ltevzw/?page=2#collapse30http://https://goo.im/devs/OpenRecovery/t0ltevzw/?page=2#collapse30
Click to expand...
Click to collapse
Thanks for this. If not for this post I wouldn't have known.
Thank you. I now have the new TWRP up and running after reluctantly using the other recovery.
athack said:
TeamWin is proud to present TWRP 2.8.0.0 for the Samsung Galaxy Note 2 (Verizon)!... located in original development
https://goo.im/devs/OpenRecovery/t0ltevzw/?page=2#collapse30http://https://goo.im/devs/OpenRecovery/t0ltevzw/?page=2#collapse30
Click to expand...
Click to collapse
http://https://goo.im/devs/OpenRecovery/t0ltevzw/?page=2#collapse30
athack said:
sorry just thought i was helping out...
Click to expand...
Click to collapse
athack said:
TeamWin is proud to present TWRP 2.8.0.0 for the Samsung Galaxy Note 2 (Verizon)!... located in original development
https://goo.im/devs/OpenRecovery/t0ltevzw/?page=2#collapse30http://https://goo.im/devs/OpenRecovery/t0ltevzw/?page=2#collapse30
Click to expand...
Click to collapse
I'm really glad you posted this. Sometimes it's a Royal pain in the a$$ to find a link to download in the official TWRP thread without getting the runaround. Thanks most muchly.
The zip version can be flashed in recovery...right?
Yes it can. .
Gulfstream 650 said:
The zip version can be flashed in recovery...right?
Click to expand...
Click to collapse
Sent from my SCH-I605 using XDA Free mobile app
Here is a link to the download page for the newest version of TWRP 2.8.3.0. http://www.techerrata.com/browse/twrp2/t0ltevzw. You just scroll to the bottom of the page where the latest build is at and pick the zip file. They also have a .tar file for flashing in Odin.
Many thanks to "Bigbiff" for this. I found it on his thread in the original android section. TWRP is my favorite recovery by far.
Every time I try to install the latest version 2.8.3 it fails.
glockman4519 said:
Here is a link to the download page for the newest version of TWRP 2.8.3.0. http://www.techerrata.com/browse/twrp2/t0ltevzw. You just scroll to the bottom of the page where the latest build is at and pick the zip file. They also have a .tar file for flashing in Odin.
Many thanks to "Bigbiff" for this. I found it on his thread in the original android section. TWRP is my favorite recovery by far.
Click to expand...
Click to collapse
Wow, I'm not sure why that is. It's working great for me and I had no issues with the flash.
Sent from my SCH-I605 using XDA Premium HD app
NWNJ said:
Every time I try to install the latest version 2.8.3 it fails.
Click to expand...
Click to collapse
How are you flashing it? There are 2 ways you can flash this recovery, in the recovery that you have installed and Odin. Either should work. I would use your recovery first though and of that doesn't work than go with the .tar and use Odin. You can also try Philz to flash it. There are also a couple of apps on Playstore that will help with this process to. Flashify is one and [ROOT] Rashr - Flash Tool is another.
Hope this helps.
Chance favors the prepared.
I had tried both TWRP and Philz in recovery and neither worked, however, I just installed and tried Flashify and it did not work by flashing the zip file as it could not locate if for some reason, but when I downloaded the img file and flashed that it worked immediately. THANK YOU!!!
glockman4519 said:
How are you flashing it? There are 2 ways you can flash this recovery, in the recovery that you have installed and Odin. Either should work. I would use your recovery first though and of that doesn't work than go with the .tar and use Odin. You can also try Philz to flash it. There are also a couple of apps on Playstore that will help with this process to. Flashify is one and [ROOT] Rashr - Flash Tool is another.
Hope this helps.
Chance favors the prepared.
Click to expand...
Click to collapse
Stuck in TWRP
I had no idea CWM files cannot be restored with TWRP. I just downloaded latest TWRP and cannot get phone to bootup past Galaxy note 2 logo.I can bootup into TWRP though. Is there a way to disable TWRP to restore back to CWM please? Sorry to bother you all. Thanks in advance.
You need to download CWM .tar and flash with Odin on a PC out laptop. Once you flash CWM recovery with Odin you can boot into that recovery and restore your back up you made. It is either that or try to find CWM in a zip file and flash in TWRP. I don't recall seeing any in a zip format though but I will check for you.
"Chance Favors the Prepared"
---------- Post added at 11:41 PM ---------- Previous post was at 11:30 PM ----------
I think that you should be able to use Philz touch recovery to restore CWM backups too. So you may want to flash Philz with your installed TWRP and then after the flash go to the TWRP start screen and hit "reboot"then hit "reboot recovery" and it should bout into Philzs. It is going to say "there is no system installed are you sure you want to reboot" hit yes and it should boy you into Philz.
Like I said I'm not 100%sure it will restore a true CWM backup but i would day that these would be your options. Maybe someone else has anything different to do?
"Chance Favors the Prepared"
---------- Post added 15th January 2015 at 12:00 AM ---------- Previous post was 14th January 2015 at 11:41 PM ----------
https://www.dropbox.com/s/jx1ztalnrlaxhi9/Note2-CWM-6.0.4.3-SCH-i605.zip?dl=0
Here is a link to my shared folder in drop box. I found CWM 6.0.4.3 in zip format. You can download this and just flash in TWRP and then reboot to recovery and you should be back on CWM recovery and you will be able to restore your back up.
Hope this helps.
"Chance Favors the Prepared"
Hi there,
Havin a little issue with my girlfriends i9100. Flashed clockwork recovery and cm12. 1 but somehow the recovery changed to cyanogenmod recovery and i cant seem to get rid of it in order to install gapps. Neither heimdall nor adb did work in order to Flash twrp. Flashify/twrp Manager didnt work for gapps flash either. Any suggestions?
Jogoe said:
Hi there,
Havin a little issue with my girlfriends i9100. Flashed clockwork recovery and cm12. 1 but somehow the recovery changed to cyanogenmod recovery and i cant seem to get rid of it in order to install gapps. Neither heimdall nor adb did work in order to Flash twrp. Flashify/twrp Manager didnt work for gapps flash either. Any suggestions?
Click to expand...
Click to collapse
You could try this:
Download latest cm 11 nightly
In cm recovery got to apply update and flash cm11.
Reboot then in recovery (should be cwm) flash again latest cm 12.1 together with "isorec- twrp recovery 3.0.2-1.zip by the.gangster" in one go (important!)
Then you have latest twrp for flashing anything and also for incrasing partition (System/data) for flashing bigger packages of gapps or cm 13 with gapps (here incrasing System and data partition is a "must")
Sent from my STAIRWAY using XDA-Developers mobile app
---------- Post added at 01:46 PM ---------- Previous post was at 01:41 PM ----------
Just to add: i never tried to flash twrp.zip in cm recovery so i am not sure if it works (would save some Step from above
Sent from my STAIRWAY using XDA-Developers mobile app
Jogoe said:
Hi there,
Havin a little issue with my girlfriends i9100. Flashed clockwork recovery and cm12. 1 but somehow the recovery changed to cyanogenmod recovery and i cant seem to get rid of it in order to install gapps. Neither heimdall nor adb did work in order to Flash twrp. Flashify/twrp Manager didnt work for gapps flash either. Any suggestions?
Click to expand...
Click to collapse
Hi Friend,
CM official roms come with default recovery mode just like the official google roms have there official recoveries cm have.
here is what you will do what you need to do (I use Odin)
NOTE:don't Restart your phone, you have to make the steps from 2 to 4 without restart
1-Install any recovery or kernel from Odin to your mobile (that is the only way to get rid of cm recovery) VERY IMPORTANT!!!
2- open the recovery you installed and flash the rom that you want
3- flash the gapps (optional)
4- flash this file https://dl.twrp.me/i9100/twrp-3.0.2-0-i9100.img (VERY IMPORTANT To Be In The Same Order)
now restart your phone your phone must open now with the new rom, open the recovery mode after the restart to check
VERY IMPORTANT reply to me, I want to know if it worked with you
Thanks,
M.FANDIES said:
Hi Friend,
CM official roms come with default recovery mode just like the official google roms have there official recoveries cm have.
here is what you will do what you need to do (I use Odin)
NOTE:don't Restart your phone, you have to make the steps from 2 to 4 without restart
1-Install any recovery or kernel from Odin to your mobile (that is the only way to get rid of cm recovery) VERY IMPORTANT!!!
2- open the recovery you installed and flash the rom that you want
3- flash the gapps (optional)
4- flash this file https://dl.twrp.me/i9100/twrp-3.0.2-0-i9100.img (VERY IMPORTANT To Be In The Same Order)
now restart your phone your phone must open now with the new rom, open the recovery mode after the restart to check
VERY IMPORTANT reply to me, I want to know if it worked with you
Thanks,
Click to expand...
Click to collapse
Hi
Just want to mention 2 things:
You cannot use any recovery to install cm12 of above. It must be at least a KK compatible recovery.
And not all recoveries can flash .img-files (and the latest version of twrp is 3.0.2-1 of which @the.gangster made a .zip-file for us to use).
Regards
Sent from my ME173X using XDA-Developers mobile app
TriboDoP said:
Hi
Just want to mention 2 things:
You cannot use any recovery to install cm12 of above. It must be at least a KK compatible recovery.
And not all recoveries can flash .img-files (and the latest version of twrp is 3.0.2-1 of which @the.gangster made a .zip-file for us to use).
Regards
Sent from my ME173X using XDA-Developers mobile app
Click to expand...
Click to collapse
sorry for mistakes i have Focused on the Isorec Bec It Have Been a long time from the last time i used it as i have no more i9100
and sure the hard point isnt the compatable recovery it is easy to find and as he have flashed an official cm12.1 rom then he have a working one
am i right or not
thanks,
M.FANDIES said:
sorry for mistakes i have Focused on the Isorec Bec It Have Been a long time from the last time i used it as i have no more i9100
and sure the hard point isnt the compatable recovery it is easy to find and as he have flashed an official cm12.1 rom then he have a working one
am i right or not
thanks,
Click to expand...
Click to collapse
Yes your instructions are correct when using kk recovery and isorec- rec .zip.
Of course there are more ways to do it like by the great @Lanchon in this thread (MOD) IsoRec: Isolated recovery for Galaxy S 2 on Page 53 Post # 529.
Regards
Sent from my STAIRWAY using XDA-Developers mobile app
Thank u guys, i will try and report back next week!
TriboDoP said:
Yes your instructions are correct when using kk recovery and isorec- rec .zip.
Of course there are more ways to do it like by the great @Lanchon in this thread (MOD) IsoRec: Isolated recovery for Galaxy S 2 on Page 53 Post # 529.
Regards
Sent from my STAIRWAY using XDA-Developers mobile app
Click to expand...
Click to collapse
lol thanks! you can actually link posts by right-clicking on the #NNN at the top right corner of each post and selecting "Copy link address"...
http://forum.xda-developers.com/showpost.php?p=69118100&postcount=529
Lanchon said:
lol thanks! you can actually link posts by right-clicking on the #NNN at the top right corner of each post and selecting "Copy link address"...
http://forum.xda-developers.com/showpost.php?p=69118100&postcount=529
Click to expand...
Click to collapse
Thanks!
I never bothered about it but it will save me some typing in the future.
TribodoP
Sent from my STAIRWAY using XDA-Developers mobile app
Anyone here care to share stock firmware? Looking for one and Sammobile's server is down..
---------- Post added at 11:56 AM ---------- Previous post was at 11:42 AM ----------
Disregard the above request.. I've got the download working..