Hello everyone I just started New Thread for our new device Huawei Mediapad 7 lite
1 rooting
2 cwm installing
3 custom rom
4 bricking
5 unbricking
6 .................?
I got rooted my device with unlockroot tool u can get it from official web unlockroot.com
now I am testing to flash cwm recovery by using a lot of method but not passed ,
I think this device hasn't download mod
but there is official way to flash official firmware with dload ( inside : unlmt.cfg ,update ) copy dload folder to sdcard and just reboot ,
and there is the way to flash cwm recovery.img by entering fastboot mod but when I did it I got problem that my pc doesn't recognize device even installed all drivers related .ie fastboot ,adb and usb driver . Any advice ! Thanks
My experience on this device
1 No proximity sensor u can not use flip cover to screen on off
2 No hdmi port
3 No flash light
4 No phone speaker the voice only come from back speaker and headphone
5 No auto brightness
6 No fm radio
And if i may add something:
A 1.0Ghz Cortex A8 CPU with Vivante GC800 GPU that is good but has a very poor gaming compatibility.
I put the CPU speed in bold because the tablet is announced everywhere as a 1.2ghz, including Huawei's site, but that's not true. I will be returning mine tomorrow after i complained about this at the store. The store contacted Huawei and their reply was:
"we are sorry for the mistake, the MediaPad 7 Lite has infact a 1.0ghz CPU instead of the announced 1.2ghz", etc, etc, etc. But despite this statement, the device remains announced as a 1.2ghz tablet.
The tablet is well built, and not as slow as some reviewers say, but i can't trust a company that does this kind of stuff. Plus, they don't seem to plan to release JB for it (not even ICS 4.0.4)
Anyway, i wish the best of luck to anyone that is willing to develop software for it, i know from experience that everything is possible here at XDA.
Sorry for spamming a bit, but i think everyone deserves to know this.
Sure, it isn't the fastest tablet out there - but for what you pay, it isn't bad either. From what I have seen around here, you can install an overclock-capable kernel and get some decent speed out of it - and the build quality isn't bad at all. I use it (stock) to play a few games, such as Mini Motor Racing, and check my social networks when out and about - and it does those, and YouTube streaming, just fine.
It would be nice to see something like Cyanogen support this little tablet. I don't think Huawei will.
sow bad
Related
Hi I have an Infotmic Wowpad that has been with me for around a year now and I've been wondering how I could update it.To me its a real brick as its so bloody slow and its battery life is bad too.I want to do a major upgrade to this tablet so I could play numerous games,watch movies and videos and other things like Skype.Another problem is that the old Android Market on this supports only like 5 apps for my tab! .Plz can someone help me update this thing with a easy simple way.I dont even know if its rooted or not and I would love to update it to either a fast and less laggy version of Froyo,Gingerbread or ICS.Some important info to know:
1.Model Number-deb
2.Firmware version-2.1-update1
3.Kernel version-2.6.32.9
4.Build number-deb-r2.1.1561
Thats pretty much it and it would be great if someone helped me turn it into a daily device as I have seen many reports on the net that this device can turn out amazing.
Thanx for reading and hopefully i can change this tablet as soon as possible.
~Ihazo333
here http://www.androidtablets.net/forum/gome-flytouch-ii-firmware/12723-froyo-android-2-2-running-ft2-series-tablets-confirmed.html is how to upgrade your tablet to froyo 2.2
i dont find any gb or ics updates
Btw are Infotmic Wowpads already rooted and should i root it before doing this if it isnt rooted and where do i find 2.1 v3245 coz i dont have that one....
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
I found site with tutorial:
www.androidtablets.net/forum/gome-f...roid2-1-stable-smooth-fast-unofficial-63.html
But there is link with firmware on megaupload which is closed and i can't find any other site
Sent using r800i with DoomKernel v14 (1.21ghz)
One quick question...is Flytouch2 already rooted,does it need to be rooted with some kind of app?
I can't help u too much with it but i think u don't need root.
As i read from sites (i gave in previous posts): when u start ur device from SD card with rom it should start flashing/copying files so it has installed sth what let u do it and u dont need nothing new (like root)
I can say that on my Xperia i dont need root to flash roms, so its possible that u dont need it too
Sent using r800i with DoomKernel v14 (1.21ghz)
Should i just use the sites XDA have said to use to get android.rar, because androidtablets said if that megaupload didnt work that we should go to XDA's choice of mediafire...another question is this the one i wanted 2.1 v3245?
Winpad a10 firmware needed
Hey Dev!
If you can help me out rooting winpad a10 or providing me stock rom, i would be very thankful.
but before that! i must tell you things:
I have android system recovery 2e installed on this device, searched everywhere to update it to 3e but no luck.
I tried updating to CWM recovery but it keeps saying signature verification failed
I have tried using ROM Manager but nothing happens.
I have tried rooting through computer but still no luck.
My patience is running out, please help me!
here is the info all i can get:
model number: winpad a10 powered by wowpad
firmware version: android 2.1 update-1
kernel version 2.6.32.9 [email protected]#1 Wednseday December 15 2010
Build Number: deb-r2.1.1480
Detailed Description
10inch tablet pc/ MID
google Android 2.1 OS MID
support 3G
2 GB Memory
SD card max to 32GB
2MP Camera
External GPS Antenna
WiFI, LAN, USB Keyboard
HDMI Port
Leather Cover
beautiful appearance tablet pc
Software: MSN Skype,MSN,Google Talk,Email
3G, Bluetooth
Tablet pc os :
TF card: extension maximal 32GB
CPU:798 MHz
RAM
256MB DDR2
Storage
2GB NAND Flash
Operating System
Google Android 2.1/ Windows CE
Display
10.2 inch Touch Screen High Definition LCD
Resolution
1024*600
Touch
screen
10 inch resistive touch screen
Slot
1 x USB2.0 Host
2 x USB2.0 OTG
2 x TF Card Slot
1 x Stereo Earphone Slot
1 x 30 pin slot
Network
802.11b/g/n WIFI
RJ45 USB connector
Office software
support word,Excel,Power point and email function
Touch Control
Full size touch operation, Sliding menu
TF Card
Support high speed Micro SD card max to 32GB
Size
27.5cm×18.5cm×2.5cm
Weight
0.75kg (NW), 1.05(GW)
if you can get me a stock rom backed up from the same device, or a custom rom that supports this kind of tablet then please help me!
Any help would be highly appreciated!!
Hey guys,
This is my 1st post here ever.
The only time I fiddled around with rooting an android phone was more than a year ago when I had an AT&T Samsung infuse. I followed very detailed instructions on how to root it and upgrade it. It worked like a charm and I'm so grateful to all of you experts trying to help newbies.
A friend of mine went to China last month and brought me a Samsung s3 clone.
The phone is factory unlocked BUT
1. It doesn't have the original google play application. It has a similar logo which leads to a Chinese app store.
2. Google mail account application is missing
3. The phone supports only Chinese, Korean and English languages. (I'd like to use it in different ones)
So I need to re-install a good Android version that has all the Android features that I'm missing
I thought it would be easy to find instructions on how to do it it here, but unfortunately I wasn't lucky to find a direct and clear step -by step instructions for my phone model
Phone: Samsung Galaxy S3 GT-i9300
Model #: mtk6515_ics2
Android version: 4.0.4
Base band version: MAUI.11AMD.W12.22.SP.V14
Kernel Version: 3.0.13
[email protected]#1
Build Number: ALPS.ICS2.MP.V1.18
Custom Build Version: V15.12
Please help!
Is there anybody out there?
Is there anybody out there? :crying:
Hey man,
unfortunately I don't think anyone can help you rooting/changing roms as it's a replica and there isn't a real development for it.
BUT as for the play store you can DL the apk directly from here:
http://www.androidpolice.com/2013/05/14/download-latest-google-play-store-4-1-6/
As for the phone language, after installing the google play store look for:
https://play.google.com/store/apps/details?id=jp.co.c_lis.ccl.morelocale&hl=en
and choose the language of your wishing. That is in case that your phone supports it.
If you mean by google mail account the gmail app then in that case:
http://www.androidpolice.com/2013/0...ith-slide-out-navigation-and-brand-new-inbox/
BTW for future references - try to make a search for yourself I'm sure you could've find those in less than a minute
Cheers.
Thanx
Thanx a lot for your effort and concern.
I downloaded the latest google play apk, I installed it, but it wasn't working apparently because "google login service" and "google services framework" were missing too!
So I downloaded them, but they needed to be installed in system/apps.
I downloaded "root explorer" which should help me accessing the system folder.
I copied&pasted the apps in system/apps but a message says "your phone should be rooted first in order to paste" came out.
So back to square1
On the other hand, I tried to disactivate some of the annoying Chinese applications that came with the system using "root app delete", and guess what?
I get the same message that I should root this phone first.
So how can I root this bloody thing???
Yeah that is sounds pretty frustraing..Well I guess you won't find here a "how to root s3 replica" guide and personally I wouldn't try and rooting the device as it could easily brick it.
I suggest you go to the store and tell them that you've got a phone with no option to download apps, or connect to your Google account...
Hope you'll sort things up with the store soon
eytan123 said:
Yeah that is sounds pretty frustraing..Well I guess you won't find here a "how to root s3 replica" guide and personally I wouldn't try and rooting the device as it could easily brick it.
I suggest you go to the store and tell them that you've got a phone with no option to download apps, or connect to your Google account...
Hope you'll sort things up with the store soon
Click to expand...
Click to collapse
I wish I could follow your advise. The shop is 4000 miles away in China.
There is a google store app installed, but it's fake. It has a similar icon but with different proportions. The problem is that it's in Chinese and it deals with chinese applications.
Oh that is unreachable, but maybe can you contact them via Email etc..?
Anyways I found this thread I think you'll see it much more beneficial than my help as I don't have experience on rooting replicas and it's focused on your device:
http://forum.xda-developers.com/showthread.php?t=1921178
eytan123 said:
Oh that is unreachable, but maybe can you contact them via Email etc..?
Anyways I found this thread I think you'll see it much more beneficial than my help as I don't have experience on rooting replicas and it's focused on your device:
http://forum.xda-developers.com/showthread.php?t=1921178
Click to expand...
Click to collapse
thanx,
This method is for i9300 mtk6575
Will it work on my phone which is i9300 mtk6515_ics2?
What are my chances to brick the phone if I follow this procedure?
festerzio said:
thanx,
This method is for i9300 mtk6575
Will it work on my phone which is i9300 mtk6515_ics2?
What are my chances to brick the phone if I follow this procedure?
Click to expand...
Click to collapse
If you flash recovery from different device, there's a big chance you brick it
Try to use MTKDroidTools to root it, its pretty safe.
As @lolet said correct, you can possibly brick your phone...
That's why I advise you to ask in the thread I've linked onto, there are fellows there with much more experience than myself with rooting your device.
I guess in the last couple of years I've flashed hundreds of times but only on samsung, htc and motorolas.
Cheers
Good time. Please help find the firmware on clone I9300. For many drivers pumped and can not find adequately to my I9300. Lays bricks. All who have tried to upload the firmware through Flush Toole an error S_DL_GET_DRAM_SETTING_FAIL (5054) do not know where to find them. Here is a description of TA
model
I9300 1:01
network
Dual sim card
An unlocked 2G GSM 800/850/1800/1900MHz
Processor (CPU)
MTK 6575 1.0GHz
operating system
Android 4.0.4
RAM
512
ROM
* Support TF card up to 32GB
screen
4.7 inch Touch Screen Resolution: HD AMOLED, 800 * 480Pixels
camera
Front 1.3 / Rear 8MP with Flash Light, Support Video record
wireless
WiFi 802.11b / g, GPRS/EDGE/3G, Bluetooth 2.1, FM-radio
GPS
Integrated GPS-Navigation + AGPS
TV
No.
sensor
G-sensor, light sensor, proximity sensor, motion sensor
clone GT-9300-Microsim second one is the usual Sim, OS 4.04, kernel version 3.0.13, lxq @ server0-br # 1 Thu Mar 14 11:53:11 GST 2013 build number ALPS.ICS2.MP.V1.18 , Custom build version v19.01
photos of the phone attached
zver16 said:
Good time. Please help find the firmware on clone I9300. For many drivers pumped and can not find adequately to my I9300. Lays bricks. All who have tried to upload the firmware through Flush Toole an error S_DL_GET_DRAM_SETTING_FAIL (5054) do not know where to find them. Here is a description of TA
model
I9300 1:01
network
Dual sim card
An unlocked 2G GSM 800/850/1800/1900MHz
Processor (CPU)
MTK 6575 1.0GHz
operating system
Android 4.0.4
RAM
512
ROM
* Support TF card up to 32GB
screen
4.7 inch Touch Screen Resolution: HD AMOLED, 800 * 480Pixels
camera
Front 1.3 / Rear 8MP with Flash Light, Support Video record
wireless
WiFi 802.11b / g, GPRS/EDGE/3G, Bluetooth 2.1, FM-radio
GPS
Integrated GPS-Navigation + AGPS
TV
No.
sensor
G-sensor, light sensor, proximity sensor, motion sensor
clone GT-9300-Microsim second one is the usual Sim, OS 4.04, kernel version 3.0.13, lxq @ server0-br # 1 Thu Mar 14 11:53:11 GST 2013 build number ALPS.ICS2.MP.V1.18 , Custom build version v19.01
photos of the phone attached
Click to expand...
Click to collapse
please this firmware link ,,,
Hello everyone,Namaste.Regards from India!
Last September,I bought a new phone called the Kult Beyond and it was a good phone for the Price.It's a little under $100 and myself being a student,couldn't really spend too much over that.Previously,I had an iPhone 3GS which I rescued from a recycling Center for $30 bucks,4 years ago.iOS 6.1.6 Jailbroken and was a lot of fun.But soon enough,I found it to be lacking in many aspects.So I bought this new phone,My first Android phone and I was OK with it for a while,But soon enough,I realized that it's very average and software optimization is kind of missing.3GB RAM and at idle,Only 900MB is free.Then I found it's all that System Bloatware which cannot be removed.I then learned that with ROOT,We can remove them! Also learned that Root can allow to mess with CPU/GPU Voltage and Clock settings which can help with battery life as well!
But I ran into another problem - Media*******Tek.I tried MONTHS of rooting the phone using various methods right from KingRoot.etc and NONE worked.I read that the newer MTK-equipped phones are very hard,near-impossible to root compared to Snapdragon due to many reasons such as the Mass fragmentation of MTK-Based devices.etc
Here is the specsheet of my phone
Device I.D - 33DE8604CFF9E987
Serial Number - K1950A1X77150008
Kernel Version - 3.18.35
MediaTek MT6737 Quad Core 1.25Ghz CPU
3GB RAM,32GB ROM
13MP Front and 13MP Rear Camera with Dual LED Flash
3000MaH Battery
Android 7.0 Nougat
Can anyone here please help me root my device so that I can atleast try to fix the sluggish performance at times due to some unwanted System Bloatware using the Memory and CPU Excessively ? Thanks a lot!
Bharathbigb said:
Hello everyone,Namaste.Regards from India!
Last September,I bought a new phone called the Kult Beyond and it was a good phone for the Price.It's a little under $100 and myself being a student,couldn't really spend too much over that.Previously,I had an iPhone 3GS which I rescued from a recycling Center for $30 bucks,4 years ago.iOS 6.1.6 Jailbroken and was a lot of fun.But soon enough,I found it to be lacking in many aspects.So I bought this new phone,My first Android phone and I was OK with it for a while,But soon enough,I realized that it's very average and software optimization is kind of missing.3GB RAM and at idle,Only 900MB is free.Then I found it's all that System Bloatware which cannot be removed.I then learned that with ROOT,We can remove them! Also learned that Root can allow to mess with CPU/GPU Voltage and Clock settings which can help with battery life as well!
But I ran into another problem - Media*******Tek.I tried MONTHS of rooting the phone using various methods right from KingRoot.etc and NONE worked.I read that the newer MTK-equipped phones are very hard,near-impossible to root compared to Snapdragon due to many reasons such as the Mass fragmentation of MTK-Based devices.etc
Here is the specsheet of my phone
Device I.D - 33DE8604CFF9E987
Serial Number - K1950A1X77150008
Kernel Version - 3.18.35
MediaTek MT6737 Quad Core 1.25Ghz CPU
3GB RAM,32GB ROM
13MP Front and 13MP Rear Camera with Dual LED Flash
3000MaH Battery
Android 7.0 Nougat
Can anyone here please help me root my device so that I can atleast try to fix the sluggish performance at times due to some unwanted System Bloatware using the Memory and CPU Excessively ? Thanks a lot!
Click to expand...
Click to collapse
Go on this thread:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Make sure you have unlocked bootloader before following the steps given in the above thread.
Since you have Mediatek device, you should use the custom boot img method given in the thread.
HIT THANKS IF FOUND USEFUL
Augustoandro said:
Go on this thread:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Make sure you have unlocked bootloader before following the steps given in the above thread.
Since you have Mediatek device, you should use the custom boot img method given in the thread.
HIT THANKS IF FOUND USEFUL
Click to expand...
Click to collapse
Custom Boot.img ? I couldnt find it anywhere there and also the process requires Stock Boot.img,Where and how do I find it ?
Bharathbigb said:
Custom Boot.img ? I couldnt find it anywhere there and also the process requires Stock Boot.img,Where and how do I find it ?
Click to expand...
Click to collapse
You will have to search the internet for it. Try androidmtk.com or firmwarefile.com
HIT THANKS IF FOUND USEFUL
Got my hands on this device and would love to gift it to my mom but currently it has a really bad software with no native language which is a must. Since its a spare device I have laying around now I thought I could experiment on it and see if I could get a Lineage OS running on it. She is only gonna use the dialer, messages and possibly the camera so Play store and other apps are not needed.
I have some experience in modding and flashing but i've never ported a rom or created a rom for that matter so this will perhaps be my 1st one.
I've read through tutorials and all but feels quite overwhelming (maybe i'm reading at the wrong places or misinterpreting) but i'm hoping to fill that gap.
So the questions I have, is it possible to flash firmware from a similar phone with some minor changes and hope it'll work or is my only route to extract firmware blobs from phone and use that to create a LineageOS of the same android version with all the other steps required?
Phone has
CPU SD425 Cortex-A53 1400MHz (MSM8917)
GPU Adreno 308 500MHz
RAM 2GB LPDDR3 667MHz
16GB Storage + sdcard reader
TFT Screen 480x800
Android 6 is current version (Marshmallow)
Complete specification of device
https://www.devicespecifications.com/en/model/63fc3e54
I want the same thing
I found this: https://samsung.officialsforums.com/custom-rom-samsung-galaxy-folder-2-lineageos-14-nougat/ but the download links arent working.
I was recently gifted a lovely Lenovo Tab M8 FHD tabled, and while the hardware and overall design is very spiffy, Android 10 is absolutely horrible on it. Android 10 is using up massive amount of resources, has some real bad optimization issues and it's just bad in general. I checked the official Lenovo forums and there are tons of threads about how the Android 10 OTA update that was not announced or anything has caused issues with their devices. I read both on there multiple times, and in a thread on here that it's possible to use the Lenovo rescue and recovery tool to install Android 9 through putting the old rom in a folder that has the name of the most up to date rom. I found two separate roms with the same name, if slightly different file sizes while I was combing through the internet, and while I tried to use both to get Android 9 on my device, neither worked. So, I am hoping and praying that someone on xda can give me some badly needed help with a link or even vague directions toward where I can get the firmware I so seek. I am rambling on a bit and I do apologize for that, but I can sincerely say that it would be a big weight off my metaphorical chest if I could get some help with this. Thanks for reading my post. Also, I apologize if I mixed up rom and firmware at times.
Just got Tab M8 FHD and decided to give Android 9 a try since tablet is more laggy than I though.
I got rom from https://mirrors.lolinet.com/firmware/lenovo/Tab_M8_FHD/TB-8705F/
Flashed it with SP_Flash_Tool, using the Download agent MTK_AllInOne_DA_6765.bin (found in the archive with the ROM) (I disabled "Check LIB DA match" in Flash tool options).
Rom TB-8705F_S100099_200706_BMP.zip is Android 9. Got Magisk and EdXposed running.
Maybe it's just in my mind but it does seem faster than Android 10 - well at least when scrolling through menus or browsing Play Store. Overall performance is probably the same so downgrading won't make games / apps run smoother.
xaforib said:
Just got Tab M8 FHD and decided to give Android 9 a try since tablet is more laggy than I though.
I got rom from https://mirrors.lolinet.com/firmware/lenovo/Tab_M8_FHD/TB-8705F/
Flashed it with SP_Flash_Tool, using the Download agent MTK_AllInOne_DA_6765.bin (found in the archive with the ROM) (I disabled "Check LIB DA match" in Flash tool options).
Rom TB-8705F_S100099_200706_BMP.zip is Android 9. Got Magisk and EdXposed running.
Maybe it's just in my mind but it does seem faster than Android 10 - well at least when scrolling through menus or browsing Play Store. Overall performance is probably the same so downgrading won't make games / apps run smoother.
Click to expand...
Click to collapse
After you installed Android 9, did you have to use the disbale vbmeta method like they did in Android 10 to get root or did you have to use another method?