[HOW-TO] Come back from JB to GB - Galaxy Ace II Android Development

Welcome . New thread with tutorial how to come back from JB to GB .
First you need Odin to flash your phone . If you're here you propably have got one . I recomend 3.04 or higher or 1.86 version .
1.Connect your phone to PC with Odin Flash Mode (home+ volume down + power during start )
2.In the Odin select PIT , CSC , PDA Files from pack :
http://disk.yandex.com/public/?hash=CXISs198rZIJtpzWXood+waVEXcxGbW4T1iWMkicox0=
http://d-h.st/AZN
It's only one rom with all working files i found in the internet .
It's Rom for Russia (SEB) and will change your region code .
3. Flash
4.Welcome on GB again . For sure to the time of full release of JB .
PIT File only :
https://www.box.com/s/1e4su0r4h3n0xl5ae8r7
(You can try to flash one file rom . It's can work . Maybe . But more safe metod is using full SEB Rom )
FIRST YOU NEED TO FLASH USING SEB ROM IN POST , THEN ANY GB YOU WANT !
Q and A
1.Did I can flash any GB ROM using one file rom and the added PIT File ?
A:No , you can't . First you need reflash your phone using russian 3 file rom , after this you can do everything you want .
2. It's working ?
If you know what is Odin , how to flash and doing everything like in this how to , for sure this is working .

It contains CSPA, EFS, UMS.
What for ?

Is full GB firmware applicable?

Dr01nE said:
Is full GB firmware applicable?
Click to expand...
Click to collapse
It's for sure working . Because this rescue , me after JB flash . If you will install first this Russia ROM then you can flash Rom for your localization without problems

Using the above linked PIT together with a firmware for Europe (so starting with XX...; exactly the XXLL2) didn't bring me back to GB. Flashing worked fine, but afterwards the device had a bootloop (stopped at Samsung's logo) and booting into <3e> (Samsung's recovery OS) wasn't possible.
So I'll try with the "russian" firmware now.

how is this different form previous stock versions?
Hi friends,
Is there something you changed in the PIT files for this?
What will happen if I have JB and I take a stock UK LL2 f/w from samfirmware and flash it?
thanks in advance...

jeev_one said:
Hi friends,
Is there something you changed in the PIT files for this?
What will happen if I have JB and I take a stock UK LL2 f/w from samfirmware and flash it?
thanks in advance...
Click to expand...
Click to collapse
Your phone will stuck on Ace 2 Screen .
First you need to flash using Russian Rom then you will be able to flash using UK Rom with change the regio code .
No , PIT File is original without any mods .

mann you r the best!! big thanks! +1

michal_ag said:
Your phone will stuck on Ace 2 Screen .
First you need to flash using Russian Rom then you will be able to flash using UK Rom with change the regio code .
No , PIT File is original without any mods .
Click to expand...
Click to collapse
thanks....also I've just downloaded PIT creator from
http://forum.xda-developers.com/showthread.php?t=1916936
Do you think it will help?
How do i create a UK ROM PIT for myself and avoid "falling into it" ?
regards,
jeev

@jeev_one
If I'm not mistaken,the pit file is the same for the entire Europe.
The problem is UK rom which does not contains all files needed.
Only Russia ROM contains all files needed to downgrade to GB.

jeev_one said:
thanks....also I've just downloaded PIT creator from
http://forum.xda-developers.com/showthread.php?t=1916936
Do you think it will help?
How do i create a UK ROM PIT for myself and avoid "falling into it" ?
regards,
jeev
Click to expand...
Click to collapse
The Problem isn't PIT File . It's universial for GB Roms . Problem is that you need to use 2 file ROM . Only one I found in the internet is this from Russia . Faster way is to install SEK Rom from first post . Then Reflash UK Rom and change Regional Code using *#272*IMEI# .

michal_ag said:
Welcome . New thread with tutorial how to come back from JB to GB .
First you need Odin to flash your phone . If you're here you propably have got one . I recomend 3.04 or higher or 1.86 version .
1.Connect your phone to PC with Odin Flash Mode (home+ volume down + power during start )
2.In the Odin select PIT , CSC , PDA Files from pack :
http://disk.yandex.com/public/?hash=CXISs198rZIJtpzWXood%2BwaVEXcxGbW4T1iWMkicox0%3D
http://d-h.st/AZN
It's only one rom with all working files i wound in the internet .
It's Rom for Russia (SEB) and will change your region code .
3. Flash
4.Welcome on GB again . For sure to the time of full release of JB .
PIT File only :
https://www.box.com/s/1e4su0r4h3n0xl5ae8r7
(You can try to flash one file rom . It's can work . Maybe . But more safe metod is using full SEB Rom )
FIRST YOU NEED TO FLASH USING SEB ROM IN POST , THEN ANY GB YOU WANT !
Click to expand...
Click to collapse
Thanks man, you're great
I'm back to GB now!

Cant download from your yandex link. Server cuts me off.

Dr01nE said:
Cant download from your yandex link. Server cuts me off.
Click to expand...
Click to collapse
Try the alternate link (dev-host link). See the first post.
I downloaded from the 2nd (dev-host) link through orbit (download manager)

If i flashed this firmware .. Can i flash another GB firmware ? E.g : Indonesia firmware ?
Maybe u can beat me in English , but im not sure that u can beat me in mandarin

Rikxzdjz said:
If i flashed this firmware .. Can i flash another GB firmware ? E.g : Indonesia firmware ?
Maybe u can beat me in English , but im not sure that u can beat me in mandarin
Click to expand...
Click to collapse
I flashed this GB rom and then after that I flashed Polish GB rom. My phone is from Poland.
Sent from my GT-I8160 using xda app-developers app

omer7 said:
Try the alternate link (dev-host link). See the first post.
I downloaded from the 2nd (dev-host) link through orbit (download manager)
Click to expand...
Click to collapse
I don't see dev-host link anywhere in this thread
Sent from my GT-I8160 using xda app-developers app

michal_ag said:
http://d-h.st/AZN
Click to expand...
Click to collapse
Here it is...
Sent from my GT-I8160 using xda app-developers app

It worked like a charm. Thank you so much. JB was draining my battery too fast.

michal_ag said:
Welcome . New thread with tutorial how to come back from JB to GB .
First you need Odin to flash your phone . If you're here you propably have got one . I recomend 3.04 or higher or 1.86 version .
1.Connect your phone to PC with Odin Flash Mode (home+ volume down + power during start )
2.In the Odin select PIT , CSC , PDA Files from pack :
http://disk.yandex.com/public/?hash=CXISs198rZIJtpzWXood+waVEXcxGbW4T1iWMkicox0=
http://d-h.st/AZN
It's only one rom with all working files i found in the internet .
It's Rom for Russia (SEB) and will change your region code .
3. Flash
4.Welcome on GB again . For sure to the time of full release of JB .
PIT File only :
https://www.box.com/s/1e4su0r4h3n0xl5ae8r7
(You can try to flash one file rom . It's can work . Maybe . But more safe metod is using full SEB Rom )
FIRST YOU NEED TO FLASH USING SEB ROM IN POST , THEN ANY GB YOU WANT !
Q and A
1.Did I can flash any GB ROM using one file rom and the added PIT File ?
A:No , you can't . First you need reflash your phone using russian 3 file rom , after this you can do everything you want .
2. It's working ?
If you know what is Odin , how to flash and doing everything like in this how to , for sure this is working .
Click to expand...
Click to collapse
Thank you for this, will try as soon as download completes, JB is awesome but still unstable.
Edit: worked great, flashed Russian ROM first, then Polish LL8.
Notes:
- for other noobs like me, the CODE goes to PDA in ODIN
- as mentioned above, after you flash the second ROM, set the regional code by using *#272*IMEI# (generic EU is XEO I believe, it's what I had before I went to JB).

Related

[Q] ROM heLP

i flashed ma rom to lightining rom (custom rom) nd currently i have some issues with internet and downloads..i donno wot my stock firmware is..i bouught it from india.'m sorry i am new to these stuffs...how can i flash ma rom bak to the orginal state....how many times can a rom b flashed?? i downloaded the orginal version but it has 5 files but donno how to use it, the files are as follows
1.CODE_I9100XWKE8_CL214845_REV02_user_low_ship.tar .md5
2.EFS_I9100XWKE8_CL214845_REV02_user_low_ship.md5
3.GT-I9100-MULTI-CSC-ODDKE2.tar.md5
4.KERNEL_I9100XWKE8_CL214845_REV02_user_low_ship.t ar.md5
5.MODEM_I9100DDKE2_REV_02_CL1007315.tar.md5
allthatrocks said:
i flashed ma rom to lightining rom (custom rom) nd currently i have some issues with internet and downloads..i donno wot my stock firmware is..i bouught it from india.'m sorry i am new to these stuffs...how can i flash ma rom bak to the orginal state....how many times can a rom b flashed?? i downloaded the orginal version but it has 5 files but donno how to use it, the files are as follows
1.CODE_I9100XWKE8_CL214845_REV02_user_low_ship.tar .md5
2.EFS_I9100XWKE8_CL214845_REV02_user_low_ship.md5
3.GT-I9100-MULTI-CSC-ODDKE2.tar.md5
4.KERNEL_I9100XWKE8_CL214845_REV02_user_low_ship.t ar.md5
5.MODEM_I9100DDKE2_REV_02_CL1007315.tar.md5
Click to expand...
Click to collapse
One thats not what you flash you flash the full tar file as instructed via PDA .
Be better if you read and follow the instructions from where you got that file from .Or follow the instructions in the stock rom posts .
jje

need help firmware

Hello,
im new here. Im from Germany and i bought my s2 from amazon.co.uk in may. I think its the GT-I9100LKAXEU, but im not sure.
I need a old 3-parts firmware, with which i can use the pit file and then update it then with kies.
The reason is that my headphone-socket is a bit damaged and i want to give it for warranty
excuse me for my not so perfect english
Thanks a lot
here for unbranded http://forum.xda-developers.com/showthread.php?t=1075278
and here for branded http://forum.xda-developers.com/showthread.php?t=1113928
but i need a official firmware with seperate files for csc, pda and phone, where i can use the pit file
sk91s2 said:
but i need a official firmware with seperate files for csc, pda and phone, where i can use the pit file
Click to expand...
Click to collapse
Why do you want to use a PIT file .
Rule is do not use PIT only for experienced users .
Three part firmware is on samfirmware .
For warranty flash stock firmware from link given if rooted or custom rom reset rom counter with USB jig is the method used .
jje
sk91s2 said:
but i need a official firmware with seperate files for csc, pda and phone, where i can use the pit file
Click to expand...
Click to collapse
No, you don't.
JJEgan said:
Why do you want to use a PIT file .
Rule is do not use PIT only for experienced users .
Three part firmware is on samfirmware .
For warranty flash stock firmware from link given if rooted or custom rom reset rom counter with USB jig is the method used .
jje
Click to expand...
Click to collapse
^^ this
mariosraptor said:
here for unbranded http://forum.xda-developers.com/showthread.php?t=1075278
and here for branded http://forum.xda-developers.com/showthread.php?t=1113928
Click to expand...
Click to collapse
These are official.
do u know what is ur CSC ?
I think its also fine if you simply flash a stock firmware via recovery and then flash a stock kernel through odin. no need for anything else afaik
cyanoviper said:
I think its also fine if you simply flash a stock firmware via recovery and then flash a stock kernel through odin. no need for anything else afaik
Click to expand...
Click to collapse
How can he flash stock via recovery ???????????????
jje
JJEgan said:
How can he flash stock via recovery ???????????????
jje
Click to expand...
Click to collapse
He can use mobile odin as long as he is rooted.
Sent from my GT-I9100 using xda premium
You don't need a "3 part" FW, there is no need for all "parts" being seperate.
The ROMs in Intratech's thread contain everything needed, you can say "all 3 parts are packed into the one file".
Just flash a matching one of those.

[Q] I need 3 part firmware for GT-I9300 GS3

Hi guys,
i need a 3 part firmware for GT-I9300 because i have a problem with my phone.
Plz help me. :crying:
Thanks
ValoX
What kind problem?
Sent from my GT-I9300 using Tapatalk 2
Spontaneous reboots. And other. My firmware was corrupted when I installed the CM9. I tried the reset and wipe. But with no result. I tried also with more flash of the stock firmware.
Sorry for my bad English.
3 part firmware is found at sammobile.com
jje
Please give me the link. I didn't found it.
Please help me! :crying:
ValoXis said:
Please help me! :crying:
Click to expand...
Click to collapse
Here is the downloadlink for a unbranded Italian rom http://www.hotfile.com/dl/160760211/17a8084/I9300XXALF6_I9300ITVALF1_ITV.zip.html.
Extract it once (from .rar to .tar), password sammobile.com and flash it with Odin v 3.04.
Its 1 file and put it in PDA, boot in downloadmode and flash it.
Unfortunately this is not necessary. To solve my problem it requires the firmware in 3 parts.
why 3 parts, 1 part will do!
Verstuurd van mijn GT-I9300 met Tapatalk
I need to do the deep clean 2.
The problem is the same: http://forum.xda-developers.com/showthread.php?t=1721559
How to solve it?
I had a similar issue when flashing something with Mobile Odin went wonky. I was able to get into download mode and flash a stock firmware via full Odin but after that I was stuck at the splash screen. I solved the problem by booting into Samsung recovery (vol up + home + Power) and performed a factory reset there. I was then able to boot into the OS and start from scratch.
Follow his method use one file
Sent from my GT-I9300 using Tapatalk 2
With one file firmware the problem remains. It need 3 parts firmware (CODE, MODEM, CSC)
go ask here http://forum.xda-developers.com/showthread.php?t=1671969
browse 1st
ValoXis said:
With one file firmware the problem remains. It need 3 parts firmware (CODE, MODEM, CSC)
Click to expand...
Click to collapse
Why ??? one part firmware includes those three .
But as said 3 part firmware = sammobile .
jje
apisfires said:
go ask here http://forum.xda-developers.com/showthread.php?t=1671969
browse 1st
Click to expand...
Click to collapse
Thanks. But this don't solve my problem.
JJEgan said:
Why ??? one part firmware includes those three .
But as said 3 part firmware = sammobile .
jje
Click to expand...
Click to collapse
I didn't found it! If you have it please give me the link.
Just flash the corresponding firmware from SamFirmware.com
When finished, boot to the stock recovery and factory-reset the phone
If it still does not work, resume complaining about needing a 3-part firmware
Howver the firmwares on SamFirmware have the 3 files bundled in one flash-file, so just do it...
d4fseeker said:
Just flash the corresponding firmware from SamFirmware.com
When finished, boot to the stock recovery and factory-reset the phone
If it still does not work, resume complaining about needing a 3-part firmware
Howver the firmwares on SamFirmware have the 3 files bundled in one flash-file, so just do it...
Click to expand...
Click to collapse
If I use a SamMobile firmware, that firmware is all-in-one?
ValoXis said:
Thanks. But this don't solve my problem.
I didn't found it! If you have it please give me the link.
Click to expand...
Click to collapse
If you cannot find what you require then it may be worth asking on sammobile forum for what you require .
Only 3 part firmware i have ever seen is on sammobile although that was SGS1 and 2 models in the past presumed that sammobile supplied 3 part for SGS3 might be wrong as you are the only one ever mentioned 3 part firmware .
jje
You could've just flashed the corresponding firmware from samfirmware and followed through on the description to check if it works.
I'm sure there are people who could convert the 1-file firmware to a 3-file firmware for you but what would be the point given that the one file holds everything you need?

[Q] Software Break after installing wrong JellyBam ROM

Hi All ,
this is my first time to flash a custom ROM .
yesterday i flashed a JeallyBam ( JellyBam.AOKP.20121005-DAILY-i9100G ) .
i have an international samsung i9100 .
as you have now figured , i have flashed the wrong rom for my mobile ( the rom is for i9100g , while my mobile is i9100 ) .
after flashing , and the mobile reboots , i canot pass the Samsung Galaxy S II (with yellow triangle) screen and for some reason i can not load into recovery anymore! loading to download mode works fine.
after researching , i know that the yellow triangle icon is for the ClockWorkMod .
so , i thought if i change that kernel , it may be fine .
i have then installed Siyah kernel v4.1.5 , but i can not also go to recovery mode .
when installing stock samsung rom ( 4.0.3 or even 4.0.4 ) the operation hang on writing FACTORYFS.img file , and it eventually fails with red icon in ODIN 1.85 .
last trial is to install stock kernel for 4.0.4 ( http://hotfile.com/dl/165094518/319d54b/KERNEL_XWLPT.tar.html )
found from this post :
http://forum.xda-developers.com/showthread.php?t=1544487
and i then tried to install the I9100XWLPX officail stock samsung rom , but with the same results .
all i can do with my mobile now is to go to download mode , and sometime i can go to recovery mode .
the issue is now i can not write any ROM into the phone , even the stock one .
please help me into restoring my phone to a working state .
So if you can go to recovery do full wipe. Or try to format everything but you lost data. And then install stock Rom
Send form Galaxy S2. Using XDA Premium
You need to flash stock firmware with .pit file.
Follow the guide here: forum.xda-developers.com/showthread.php?t=1457458
does not work also
Jokesy said:
You need to flash stock firmware with .pit file.
Follow the guide here: forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
i downloaded the rom , and here is what i have done :
the zip contains the following :
GT-I9100-MULTI-CSC-OXALPH.tar.md5 ==> used in CSC button
I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 ==> used in PDA button
MODEM_I9100XXLPH_REV_02_CL1104396.tar.md5 ==> used in phone button
I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 ==> not used ( don't know what is this )
as i see also , there is no .pit file in the rom .
the issue is the same here , flash hangs on writing factoryfs.img
please advise
damanhoury said:
i downloaded the rom , and here is what i have done :
the zip contains the following :
GT-I9100-MULTI-CSC-OXALPH.tar.md5 ==> used in CSC button
I9100_CODE_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 ==> used in PDA button
MODEM_I9100XXLPH_REV_02_CL1104396.tar.md5 ==> used in phone button
I9100_APBOOT_I9100XXLPH_CL118559_REV02_user_low_ship.tar.md5 ==> not used ( don't know what is this )
as i see also , there is no .pit file in the rom .
the issue is the same here , flash hangs on writing factoryfs.img
please advise
Click to expand...
Click to collapse
get this pit file here
it works now
Jokesy said:
get this pit file here
Click to expand...
Click to collapse
it seems the issue was with the USB port in the PC .
i now have flashed a stock 4.0.4 into the mobile successfully .
thanks you so much for your support so far .
but the goal which have bring me here is not achieved yet , install jellybam on my S2 .
do you know where to download this ROM in Odin format , instead of this hassle of installing the ROM using Clockworkmod ??
damanhoury said:
it seems the issue was with the USB port in the PC .
i now have flashed a stock 4.0.4 into the mobile successfully .
thanks you so much for your support so far .
but the goal which have bring me here is not achieved yet , install jellybam on my S2 .
do you know where to download this ROM in Odin format , instead of this hassle of installing the ROM using Clockworkmod ??
Click to expand...
Click to collapse
You are definitely going to use CWM recovery.
Stop blaming CWM recovery!.CWM recovery was not the reason why you flashed GT I9100G ROM. blame yourself for that and you should count yourself lucky for still having a usable device.
First flash a custom kernel, Siyah or Speedmod via odin.
Now its working
thanks for your recommendation of installin siyah kernel .
Now i'm running SGS2-Intact-AOSP successfully on my Sii .
but the big issue for me now , is Facebook sync , it is not available
damanhoury said:
thanks for your recommendation of installin siyah kernel .
Now i'm running SGS2-Intact-AOSP successfully on my Sii .
but the big issue for me now , is Facebook sync , it is not available
Click to expand...
Click to collapse
use some third party apps from store which can do the same for u
kernel patch
i have heard that there is some JB roms are patched with the Facebook sync enabled .
so , may i ask if any one know where to get this kernel patch for SGS2-Intact-AOSP ?
damanhoury said:
i have heard that there is some JB roms are patched with the Facebook sync enabled .
so , may i ask if any one know where to get this kernel patch for SGS2-Intact-AOSP ?
Click to expand...
Click to collapse
I don't think so.
I think The Facebook patched only existed on some ICS AOKP ROMs. The patch is also not kernel related.
On JB ROMs, you have to rely on third-party Facebook apps for sync.

guys , please i soft brick my s3 int. cannot find f s/w

Hey everyone, i need your help please
My phone s3 int is soft bricked , and i can enter only to download mod , no boot , no recovery ,only download , otherwise a weird colored screen like an old tv appears..
I guess i have to flash via oden the firmware, but all files i found containa only pda file , and i am not able to flash it bcz the whole phone and bootloader is corrupted maybe , and i need the f s/w , not only pda , i mean phone and csc and pit or something ..and i cannot found it anywhere but links to hotfile !!
Please can anyone give me a link or suggest a move here , i will be very thankful..
Sorry for my english
http://forum.xda-developers.com/showthread.php?t=1825272
[ODIN_FIRMWARE] SGSIII I9300 Prerooted Stock Odex/Deodex & Rescue FW
Sent from my GT-I9300 using xda app-developers app
this is exactly what i need the rescue fw . thank you for replying .
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
however this contains links to hotfile . which is down ..
hotfiel also !!
this is exactly what i need the rescue fw . thank you for replying .
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6
however this contains links to hotfile . which is down ..
Download latest stock Rom and by the way pda is all u need
Ver3go said:
Download latest stock Rom and by the way pda is all u need
Click to expand...
Click to collapse
I already tried two pda files , odin didn't start flashing it gives me an error message no pit partition or something, and said failed ..
I don't know man , its already 3 days without my phone and the hotfile links are making me really angry , it's like all files needed where there ..
I am sure if i flash the whole factory firmware it would at least boot up to recovery , i mean the whole phone csc modem pit stuff.
Please anybody if have any version with links thatvwork i will be very thankful..
Hotfile is closed .
See stock rom threads .
See the Kies recovery post.
You are just going to have to wait for new uploads or buy a server slot .
There must be a person that had another link than hotfile..
ahmadalraii said:
There must be a person that had another link than hotfile..
Click to expand...
Click to collapse
Here Try this one. Worked for me.
http://forum.xda-developers.com/showthread.php?t=1835931

Categories

Resources