So it seems I have done it again, got into a pickle with my Galaxy S3. So here is what I did. I updated the device using Odin to the latest leak of 4.2.1 and I was playing around in the settings and I think I was fiddling with the mimic duplicate screen and set the resolution to 1080p, its a new setting in the developer options of 4.2.1. After that is froze and went into boot loop. I have tried re installing the firmware, no resolution. I also tried a cache wipe, nothing. So I then though I would download and install my original 4.1.2 firmware, XEF, but that said it would take a day to download. So now I am wondering what my options are, I will do anything to not have to factory reset this because it is just a huge pain in the bum and I really should learn by now not to play with firmware, cos every time I muck it all up. Oh and also my custom binary count is now at 1, even though I installed official firmware through Odin.
Thanks and sorry for asking another question, I feel like I just ask them and never answer any
mdemons12 said:
So it seems I have done it again, got into a pickle with my Galaxy S3. So here is what I did. I updated the device using Odin to the latest leak of 4.2.1 and I was playing around in the settings and I think I was fiddling with the mimic duplicate screen and set the resolution to 1080p, its a new setting in the developer options of 4.2.1. After that is froze and went into boot loop. I have tried re installing the firmware, no resolution. I also tried a cache wipe, nothing. So I then though I would download and install my original 4.1.2 firmware, XEF, but that said it would take a day to download. So now I am wondering what my options are, I will do anything to not have to factory reset this because it is just a huge pain in the bum and I really should learn by now not to play with firmware, cos every time I muck it all up. Oh and also my custom binary count is now at 1, even though I installed official firmware through Odin.
Thanks and sorry for asking another question, I feel like I just ask them and never answer any
Click to expand...
Click to collapse
Go into recovery and factory reset your device.
drew071
drew071 said:
Go into recovery and factory reset your device.
drew071
Click to expand...
Click to collapse
So that is going to be the only way? I need to go through install everything again? Would it possibly work if I installed the 4.1.2 firmware and then did a cache wipe.
mdemons12 said:
So that is going to be the only way? I need to go through install everything again? Would it possibly work if I installed the 4.1.2 firmware and then did a cache wipe.
Click to expand...
Click to collapse
if you downgrade the firmware you will probably have to wipe anyway do clear the system.
I think the easiest way to to factory reset in recovery.
drew071
drew071 said:
if you downgrade the firmware you will probably have to wipe anyway do clear the system.
I think the easiest way to to factory reset in recovery.
drew071
Click to expand...
Click to collapse
Alright then, thats what I though but thanks for your advice. Does anybody know why my binary count went to 1 though, that really bugs me.
mdemons12 said:
Alright then, thats what I though but thanks for your advice
Click to expand...
Click to collapse
No problem. Hope it works.
Drew071
went to one because you flashed unofficial firmware
Glebun said:
went to one because you flashed unofficial firmware
Click to expand...
Click to collapse
But its just a leaked firmware, I did that with the Jelly Bean 4.1.1 firmware and it was fine.
mdemons12 said:
But its just a leaked firmware, I did that with the Jelly Bean 4.1.1 firmware and it was fine.
Click to expand...
Click to collapse
leaked test beta firmware can do that .
jje
Factory reset and your counter should be fine too
I have installed 4.2.1 over XXELLA (4.1.2, which was rooted), and then did a factory reset
Now, even if the phone is rooted, my system status is official and binary counter is 0.
counter was 1 in XXELLA btw and would not go back to 0 even after using Triangle Away.
msri3here said:
Factory reset and your counter should be fine too
I have installed 4.2.1 over XXELLA (4.1.2, which was rooted), and then did a factory reset
Now, even if the phone is rooted, my system status is official and binary counter is 0.
counter was 1 in XXELLA btw and would not go back to 0 even after using Triangle Away.
Click to expand...
Click to collapse
Alright thanks for the reply I will be sure to try that
Related
help i am using galaxy s2
and unable to format the data/factory reset
its stuck on the formatting data .......
can anybody help me in this
Did you have the brick-bugged 4.0.4 leak flashed?
Did you try flashing a stock ROM via Odin?
HellcatDroid said:
Did you have the brick-bugged 4.0.4 leak flashed?
Did you try flashing a stock ROM via Odin?
Click to expand...
Click to collapse
yes earlier it was working fine but now its un able to format data............
any way bro that can i use to format data
i am on xwlpm
"Yes" as in you DID have the 4.0.4 leak installed?
If so, not much you can do. There is some threads about 4.0.4 leak bricks here, you might wanna read them.
HellcatDroid said:
"Yes" as in you DID have the 4.0.4 leak installed?
If so, not much you can do. There is some threads about 4.0.4 leak bricks here, you might wanna read them.
Click to expand...
Click to collapse
i am now on 4.0.3 xxlpq and rooted but still not able to wipe data
plz help how to wipe data any way
The question wasn't what you are on now, the question was if you ever HAD the 4.0.4 leak installed and tried a wipe or similar while running it,
HellcatDroid said:
The question wasn't what you are on now, the question was if you ever HAD the 4.0.4 leak installed and tried a wipe or similar while running it,
Click to expand...
Click to collapse
yes i was on 4.0.4 what problem i have in my phone that i am unable to wipe data
in which part
sandeepsivia said:
yes i was on 4.0.4 what problem i have in my phone that i am unable to wipe data
in which part
Click to expand...
Click to collapse
The problem is that your phone has hardware damage on the eMMC (the flash storage) now, which can't be fixed.
There's a few workarounds (read the threads about the "leak brick bug") but none of them really work out nicely.
I also cannot do a factory reset.
I'm pretty sure I've never had this 4.0.4 leaked firmware installed. I've only installed 3 or 4 roms, all of which are the most popular ones on this forum.
Even when doing the reset from CWM the phone just goes into a boot loop at the startup screen.
I can restore to stock using MY backup but I want a clear phone for sale. I would try flashing a stock firmware using odin but I can't get hold of the firmware (every link goes to a download site that won't allow me to download it!!!!).
Any suggestions?
ben cole said:
I would try flashing a stock firmware using odin but I can't get hold of the firmware (every link goes to a download site that won't allow me to download it!!!!).
Any suggestions?
Click to expand...
Click to collapse
Check out Intratech's stock ROM thread.
The links there work.
HellcatDroid said:
Check out Intratech's stock ROM thread.
The links there work.
Click to expand...
Click to collapse
Thanks very much. Finally downloading.
Well, flashed the stock firmware using Odin.
Thankfully it seems I don't have damaged eMMC and can now do factory reset. Now the kernel and recovery are stock, flash counter is reset with no yellow triangle.
Should be good enough for the phone recyclers and 200 quid.
Thanks again and hope I haven't hijacked the thread (too much)
anybody know the motherboard price
or can we replace the chip only (storage)
finally my ph is with service center for board replacement
Hi i received an OTA update 71mb or with kies .
My question is; Should i just OTA update or with kies my S3? Should i use Triangle Away before updating because my S3 is modified.
My S3 is rooted CW-root.
Everything STOCK
Baseband firmware I9300XXLF5
Denmark
Casanoaa said:
Hi i received an OTA update 71mb or with kies .
My question is; Should i just OTA update or with kies my S3? Should i use Triangle Away before updating because my S3 is modified.
My S3 is rooted CW-root.
Everything STOCK
Baseband firmware I9300XXLF5
Denmark
Click to expand...
Click to collapse
If you want keep root just update an reroot with CF Root, if you want all stock first use triangle away and reset the counter and update with Kies. Ota will not be installed because of custom recovery.
Thanks mate it's not easy to use android when I just went from ios
Hmm Triangle Away did not work? my phone still seems to be modified. I used the app and everything worked throug.
my fault, everything is ok now. Thanks again
Casanoaa said:
my fault, everything is ok now. Thanks again
Click to expand...
Click to collapse
Glad to help mate
Just got an OTA myself..but it won't install due to Root. Think it is the same root as the OP. No custom Kernels.
Pondering if I use the Kies method...will I lose data/apps etc?
Toon
ToonTonic said:
Just got an OTA myself..but it won't install due to Root. Think it is the same root as the OP. No custom Kernels.
Pondering if I use the Kies method...will I lose data/apps etc?
Toon
Click to expand...
Click to collapse
When you get a update you will not loose data, you will however have to reroot with CF Root. Doesn`t matter if you update by OTA or through Kies.
I did reset the flash counter with Triangle Away with no luck? the phone seems to be modified.hmmm Gee?
Casanoaa said:
I did reset the flash counter with Triangle Away with no luck? the phone seems to be modified.hmmm Gee?
Click to expand...
Click to collapse
Triangle away just reset the flash counter in download mode and nothing more
If you want to change the "modified" in about phone, there is 2 solution:
1- flash a stock rom with odin
2- find the thread which explain how to do it by playing with rom backup
Casanoaa said:
I did reset the flash counter with Triangle Away with no luck? the phone seems to be modified.hmmm Gee?
Click to expand...
Click to collapse
Reset the flashcounter, update rom and do a facory reset in backup and restore. If that doesn`t work flash stock rom with Odin and do a factory reset afterwards.
Thought you wanted yo keep root?
Ah i see ))
Casanoaa said:
Ah i see ))
Click to expand...
Click to collapse
If you want to keep root, update and afterwards reroot with CF Root. Done.
Thats what i have done
Got the Galaxy S3 on the 3 network in the UK, all was fine & dandy then found out about how the phone was updated & basically 3 sit twiddling their thumbs on it. Went looking for a solution, found a nice simple flash the phone with Odin, use proper Samsung firmware, thought that will do the trick for me.
Unfortunately I did exactly as I was told (didn't go down the root, well, route as there were too many options and I was lost as to wether I was using the right stuff) People swore by the flash to samsung firmware, did that last night, was perfect. Only thing left was the change csc thing, to select BTU but the option wasnt there...was told to download another firmware.......the phone returned with a "unfortunately, the process android.acore has stopped" message, was told to to a reset.......then got "unfortunately, messaging has stopped". Have flashed a few times now to no avail, I can no longer text, is my phone basically broken beyond repair?
Not ruined, but it sounds like you have clobbered some system files. Read up on rooting. Hopefully you can Root and then install a custom recovery like CWM then install a custom ROM.
It would have been better to have made a backup via recovery before you started flashing stuff.
Flash stock ROM and start again
Sent from my GT-I9300 using xda app-developers app
Or even factory reset .
But its a bad flash probably could be a corrupt download or wrong firmware .
jje
seems like u didnt follow the instructions and u could have even bricked your device all that i can say is factory reset or flash a new rom
SilvFlashProd said:
Not ruined, but it sounds like you have clobbered some system files. Read up on rooting. Hopefully you can Root and then install a custom recovery like CWM then install a custom ROM.
It would have been better to have made a backup via recovery before you started flashing stuff.
Click to expand...
Click to collapse
(s)he is having issues just fixing a stock rom misflash and you recommend a custom ROM? Even root was too complicated
I've flashed past phones to death and even still following instructions exactly, they don't always work as they should. Yeah they have cool features and yeah me or you can probably manage to fix any issues they throw up, but they are definitely not for everyone.
Sent from my GT-I9300 using xda app-developers app
bkr32 said:
seems like u didnt follow the instructions and u could have even bricked your device all that i can say is factory reset or flash a new rom
Click to expand...
Click to collapse
Bull****...his problems have nothing to do with a brick. Don't scare him.
i'd defo try a factory, cache and dalvik reset first before flashing again, you'l loose all your data but it may fix the problems you are experiencing.. Boot into recovery mode to do that.
Thanks for all the replies. I have flashed with Odin 3.04 & have found out 3.07 is out...could this be where it all went wrong? I tried following the rooting stuff but found so many variations & in my head (technology challenged when it comes to this) it was all going over my head. I did do the factory reset & reflash with a stock software (the latest I believe) but I don't know if it is a network thing which knackerec me, in CSC I have sales code saying H3G with no options to select BTU. If I post a screenshot of my settings (about device) would that help someone steer me in the right direction as a possible starting point.
My phone appears to be no longer 3 branded, but it should be locked to the 3 network in the uk.
I had the same issue with my Three branded phone. What i did was flash the rom with the PDA button ticked in Odin and then flashed it again with the same file but ticked the CSC icon instead of the PDA and it worked and then let me select BTU from the menu. Give it a try and report back, i'm 99% sure it'll work.
BTW you'll lose the HD voice by flashing it. I still havent found and easy way to get it back working.
bonzai1888 said:
Thanks for all the replies. I have flashed with Odin 3.04 & have found out 3.07 is out...could this be where it all went wrong?
No very unlikely i still use 1.30
I tried following the rooting stuff but found so many variations & in my head
One method works and is easy .
http://forum.xda-developers.com/showthread.php?t=1695238
Stock UK
http://forum.xda-developers.com/showthread.php?t=1646610
jje
Click to expand...
Click to collapse
JJEgan said:
bonzai1888 said:
Thanks for all the replies. I have flashed with Odin 3.04 & have found out 3.07 is out...could this be where it all went wrong?
No very unlikely i still use 1.30
I tried following the rooting stuff but found so many variations & in my head
One method works and is easy .
http://forum.xda-developers.com/showthread.php?t=1695238
Stock UK
http://forum.xda-developers.com/showthread.php?t=1646610
jje
Click to expand...
Click to collapse
The link for the stock you posted is what I used....didn't root as I said, but appeared to work perfectly. Then I lost access to kies & was told I needed to use csc to tick the BTU option & that would work, except I didnt & still don't have that option. Was given another link to apparently the same stock that had "multi csc options" & that when I got the Samsung acore error & I did a factory reset after about 30 minutes of trying to get into the options, then the messaging stopped working & I found out how to do te factory reset using te vol button home power thing. Is there a specific 3 firmware where I can get my phone branded again & take it from there?
Click to expand...
Click to collapse
djstevie said:
I had the same issue with my Three branded phone. What i did was flash the rom with the PDA button ticked in Odin and then flashed it again with the same file but ticked the CSC icon instead of the PDA and it worked and then let me select BTU from the menu. Give it a try and report back, i'm 99% sure it'll work.
BTW you'll lose the HD voice by flashing it. I still havent found and easy way to get it back working.
Click to expand...
Click to collapse
If I try this, what Rom did you use, was it the one in link after you?
What do you want .
Wait for updates via Kies and OTA or join XDA and flash Stock Samsung rom as released ???
Me no Kies and no OTA on my phone
Stock LG9 or leaked Jelly Bean .
jje
JJEgan said:
What do you want .
Wait for updates via Kies and OTA or join XDA and flash Stock Samsung rom as released ???
Me no Kies and no OTA on my phone
Stock LG9 or leaked Jelly Bean .
jje
Click to expand...
Click to collapse
I am happy flashing on release, please understand this is all new. If losing kies is not an issue coz I can just flash then cool. I thought kies was an essential part of the updating. I can use my phone fine just now (using go SMS Pro) but would like it back to fully working phone which would be sweet.
Nothing good is wrong with your phone. It's not even a brick yet. Flash a cwm recovery and then re trying using check rom.
Sent from my GT-I9300 using Tapatalk 2
None of these guys no what there talking about. You've bricked your phone and you won't be able to fix it. Best thing to do is cut your loss and sell it. I'll be generous and give you £50 pounds for it. That's right a fresh £50 note right now, hard cash delivered right to your door step, no questions asked!
Honestly though try flashing the original 3 firmware, it should be in the firmware thread I believe.
P.S You've not bricked your phone, no where near it so don't worry about it.
Sent from my GT-I9300 using xda premium
avocco said:
None of these guys no what there talking about. You've bricked your phone and you won't be able to fix it. Best thing to do is cut your loss and sell it. I'll be generous and give you £50 pounds for it. That's right a fresh £50 note right now, hard cash delivered right to your door step, no questions asked!
Honestly though try flashing the original 3 firmware, it should be in the firmware thread I believe.
P.S You've not bricked your phone, no where near it so don't worry about it.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks...I was giving up again to be honest as once again I was left not knowing what to do. I thought this would be the easiest place to ask but it was ending up in riddles, which is why I gave up on rooting it in the first place.
bonzai1888 said:
Thanks...I was giving up again to be honest as once again I was left not knowing what to do. I thought this would be the easiest place to ask but it was ending up in riddles, which is why I gave up on rooting it in the first place.
Click to expand...
Click to collapse
I'm on 3 UK same happened to me when I unbranded. Don't panic your phone is fine. Turn off phone then hold power + home + volume up. Let go when you see the Android man. Wipe factory reset and dalvik cache you will lose everything. Then reboot. Don't bother letting it boot back up, just hold power + home + volume down. Then flash unbranded rom via odin. Once done and booted type *#272*yourimei# and you should now have option of btu.
Sent from my GT-I9300 using xda premium
bonzai1888 said:
If I try this, what Rom did you use, was it the one in link after you?
Click to expand...
Click to collapse
Was the latest UK unbranded rom in the first page.
Previously I had rooted my Samsung Galaxy S3 on 4.1.2 in order to learn more about what is possible through first hand experience. However, my phone developed some faults and it is due to be handed in to a store in a few days, therefore I need to be able to revert the device status and reset the flash counter. I had tried using Triangle Away but to no avail. I then searched around and found out that re-flashing official firmware back onto the phone and doing a wipe data and wipe cache from recovery will solve my problem. It didn't .
However, the official firmware I re-flashed too was not the original firmware I initially had when I first got the phone last year because as an idiot, I forgot to note it down.
I am now on;
Android Vers: 4.1.2
Baseband Vers: I9300BVELK1
Build Number: JZI54K.I9300XXELLA
Download Mode:
Custom Binary Dowload: Yes (1 Count)
Custom Binary: Samsung Official
System Status: Custom
Can anyone please help me out? Would I need to flash another stock firmware as I have read that "[...]ELLA" are not compatible with Triangle Away.
Thanks.
What is the actual question that you have posted ?
Read the return for warranty post.
Basics are run TA
Flash stock rom via Odin reboot and factory reset .
jje
JJEgan said:
What is the actual question that you have posted ?
Read the return for warranty post.
Basics are run TA
Flash stock rom via Odin reboot and factory reset .
jje
Click to expand...
Click to collapse
Just had a read through my OP and yeah It is a little misty.
Basically, I need to reset the flash counter. I've tried Triangle Away before flashing a stock rom via Odin and it didn't work. I read that re-flashing would reset the flash counter but it didn't. I then did a factory reset in recovery and that changed the custom binary to official.
Mini9 said:
Previously I had rooted my Samsung Galaxy S3 on 4.1.2 in order to learn more about what is possible through first hand experience. However, my phone developed some faults and it is due to be handed in to a store in a few days, therefore I need to be able to revert the device status and reset the flash counter. I had tried using Triangle Away but to no avail. I then searched around and found out that re-flashing official firmware back onto the phone and doing a wipe data and wipe cache from recovery will solve my problem. It didn't .
However, the official firmware I re-flashed too was not the original firmware I initially had when I first got the phone last year because as an idiot, I forgot to note it down.
I am now on;
Android Vers: 4.1.2
Baseband Vers: I9300BVELK1
Build Number: JZI54K.I9300XXELLA
Download Mode:
Custom Binary Dowload: Yes (1 Count)
Custom Binary: Samsung Official
System Status: Custom
Can anyone please help me out? Would I need to flash another stock firmware as I have read that "[...]ELLA" are not compatible with Triangle Away.
Thanks.
Click to expand...
Click to collapse
ELLA works fine with triangle away.
Root the stock rom and try again?
k6? said:
ELLA works fine with triangle away.
Root the stock rom and try again?
Click to expand...
Click to collapse
Alright, I'll try it out. Is there any way to find out what stock rom I had before I reflashed to this current ELLA version?
Mini9 said:
Alright, I'll try it out. Is there any way to find out what stock rom I had before I reflashed to this current ELLA version?
Click to expand...
Click to collapse
Look at when you got your phone and the latest firmware release date
Sent from my GT-I9300 using xda app-developers app
k6? said:
Look at when you got your phone and the latest firmware release date
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Did pre order the phone from Carphone Warehouse on Orange pay monthly. Didn't have these little extra pop ups and logos that I have now with the original post mentioned firmware.
Just about to try Triangle Away right now...
Re-rooted and Device Status is still modified and the flash counter was at 2 and went down to 1 again. Custom Binary and System Status are both Custom
I don't know what else to do.
Hope someone comes along to help soon.
Sent from my GT-I9300 using xda app-developers app
1) run triangle away
2) flash btu xxemb5
3) boot recovery
4) factory reset
Done
"Please also note that some devices set the counter to 1 at every boot if you are running a custom kernel or recovery. On these devices, Triangle Away may always display 1 - make sure to check the counter in actual download mode."
Mr.W0lf said:
"Please also note that some devices set the counter to 1 at every boot if you are running a custom kernel or recovery. On these devices, Triangle Away may always display 1 - make sure to check the counter in actual download mode."
Click to expand...
Click to collapse
I think anything post XXELLA has the problem as it is due to the new bootloader, any Odin flash triggers the exclamation mark, and it won't go until you are back to stock state, however you can flash back to old bootloader, with a zip, the thread is in general with 4 or 5 bootloader to choose from.
Of course that is a risk, but worked for me fine, although I'm back on new bootloader now
slaphead20 said:
1) run triangle away
2) flash btu xxemb5
3) boot recovery
4) factory reset
Done
Click to expand...
Click to collapse
Should I do the above mentioned or not?
Mini9 said:
Should I do the above mentioned or not?
Click to expand...
Click to collapse
Yes, but if you flashing anything with Odin after, it will return
slaphead20 said:
Yes, but if you flashing anything with Odin after, it will return
Click to expand...
Click to collapse
Sorry, do not understand. What will return?
slaphead20 said:
1) run triangle away
2) flash btu xxemb5
3) boot recovery
4) factory reset
Done
Click to expand...
Click to collapse
Should I do the above mentioned or not?
Would I be able to re-flash using;
I9300XXEMB5 Download (Thanks To SamMobile!)
Base Firmware: I9300XXEMB5 (4.1.2)
Region: Europe
Country: United Kingdom
Carrier: Unbranded
Build Date: 25 February 2013
Modem: XXEMB5
CSC: OXAEMB5
Change List: 996085
Since it is the latest firmware available?
The flash counter and exclamation mark well return
slaphead20 said:
The flash counter and exclamation mark well return
Click to expand...
Click to collapse
Okay, I see. Thanks. Will I be able to use the firmware I mentioned in the above post. Since it is EMB5
Mini9 said:
Okay, I see. Thanks. Will I be able to use the firmware I mentioned in the above post. Since it is EMB5
Click to expand...
Click to collapse
Yup, same firmware I'm on, best yet imho, although I have made a couple of minor tweaks I'm UK unbranded by the way, so it's the correct firmware for me, first I've tried in a very long time!
slaphead20 said:
The flash counter and exclamation mark well return
Click to expand...
Click to collapse
Hi there. Rooted my S3 and binary counter is now showing 1. If I flash MB5 rom via odin will it stay on 1 or not?
Sent from my GT-I9300 using xda premium
aspot72 said:
Hi there. Rooted my S3 and binary counter is now showing 1. If I flash MB5 rom via odin will it stay on 1 or not?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
You'll have to run triangle away first.
Search for unroot.
Sent from my GT-I9300 using xda app-developers app
Does anybody have a solution to reseting the flash counter on the gs3 i9300 because I have tried EVERYTHING to reset this counter including using root triangle away and that doesn't work and I've tried just flashing the stock firmware back to the i9300 and that won't reset the counter and I even have a jig that's compatible with the s2, s3, s4 and that won't even reset the counter all the jig does is brings me into download mode but on my s2 it resets the counter and as of right now my counter is reading like 17 so could "somebody" Please tell me if there is some special way to reset this counter on the gs3 i9300, I'm even willing to give some money to who ever in this forum can tell me a way that this counter can be reset, and please no smart-a$$ Comments. But like I said anybody that gives me a working method to reset this binary flash counter I'll make it worth your time. Oh and like I said before, for some reason (root) triangle away does Not work on this phone so don't tell me to use that program.
Downgrade bootloader to BLFB, then use triangle away. Worked for me.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Downgrade bootloader to BLfB, then use triangle away. Worked for me.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I'll give that a try right now but where would I find blfb bootloader at?
boomboomer said:
Downgrade bootloader to BLFB, then use triangle away. Worked for me.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Disregard my last reply I've found the bootloader but I see this bootloader is for ICS and the current firmware on my i9300 is 4.3 jelly bean so how would I go about using this bootloader?
boomboomer said:
Downgrade bootloader to BLFB, then use triangle away. Worked for me.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I believe that if I was to just flash this new bootloader to my gs3 with 4.3 on it I would hard brick the device because the blfb bootloader is for ics and I'm on jelly bean, so a Lil more help in how to go about doing this would be a big help.
Bootloader is irrelevant to firmware, I'm on 4.3 with BLFB bootloader, just don't use download mode afterward as it isn't SDS safe.
Sent from my GT-I9300 using Tapatalk
You could try XXELLA. Triangle Away seems to work fine with that bootloader, and it's SDS safe. I'm running it with no problems on my phone, and I have KitKat on my phone.
Hello, having the same problem with my I9300 , running MK7 booloader (4.3) and triangleaway isn't working . I found the XXELLA file to flash with odin, but is it really safe to downgrade from 4.3 Bootloader to a
4.1.2 one ?
DopeShow said:
Does anybody have a solution to reseting the flash counter on the gs3 i9300 because I have tried EVERYTHING to reset this counter including using root triangle away and that doesn't work and I've tried just flashing the stock firmware back to the i9300 and that won't reset the counter and I even have a jig that's compatible with the s2, s3, s4 and that won't even reset the counter all the jig does is brings me into download mode but on my s2 it resets the counter and as of right now my counter is reading like 17 so could "somebody" Please tell me if there is some special way to reset this counter on the gs3 i9300, I'm even willing to give some money to who ever in this forum can tell me a way that this counter can be reset, and please no smart-a$$ Comments. But like I said anybody that gives me a working method to reset this binary flash counter I'll make it worth your time. Oh and like I said before, for some reason (root) triangle away does Not work on this phone so don't tell me to use that program.
Click to expand...
Click to collapse
I had the same problem a few days ago .... solve this ..
-wiped everything (settings, accounts, and cancel the backup, restore factory settings)
- Installed a stock room 4.3, using Odin-v3-09, again wiped all
-root with CF-Auto-Root-M0-m0xx-gti9300,
triangleaway installed this (https://www.dropbox.com/s/xbzgi7j1uor7e5k/triangleaway.apk)
- And it was ok
I hope it will work for you
OK , so i successfully downgraded to XXELLA , downloaded from here
http://forum.xda-developers.com/showpost.php?p=36414335&postcount=10588
TriangleAway worked perfect with this bootloader unlike the MK7 one that came with my 4.3 stock rom , after i saw it worked i flashed stock 4.3 again , and everything is perfect. needed to wipe data from the recovery but now device is like new . so thanks for everyone.
razjaren said:
I had the same problem a few days ago .... solve this ..
-wiped everything (settings, accounts, and cancel the backup, restore factory settings)
- Installed a stock room 4.3, using Odin-v3-09, again wiped all
-root with CF-Auto-Root-M0-m0xx-gti9300,
triangleaway installed this (https://www.dropbox.com/s/xbzgi7j1uor7e5k/triangleaway.apk)
- And it was ok
I hope it will work for you
Click to expand...
Click to collapse
OK so I went with your instructions before I tried the others that were posted here because basically I already had the stuff you said I needed and I went through and did like you said and the first time it nothing happened so I went back into recovery and wiped everything again then went straight back to triangle away and tried it again and it worked and said 0 so as course now after putting in a new flash recovery it reads one now also I restored my backup I had from cwm and restored everything back to the way it was before I tried this and went back into download mode and it still reads 1 so I tried triangle away again after that restore and it wouldn't work so basically I guess the only way to get this to work is with it freshly reset with no info put into the device and then the flash counter will reset, so thank you for your help
Thank You for everybody's input, in the end I was able to reset the flash counter going by Razjaren's instructions then restoring back to my cwm backup, so thank you again everybody.