【KERNEL】 【CM9/ICS】 Speedy Sola v5.5 - "The name is enough" 【CWM Touch】 【AROMA】【3/5】 - Sony Xperia P, U, Sola, Go

【KERNEL】 【CM9/ICS】 Speedy Sola v5.5 - "The name is enough" 【CWM Touch】 【AROMA】【3/5】
About Kernel:
"Speedy Kernel" the name itself says all story, Speedy Kernel is always based on latest Linux source code and comes with all needed new and governors and schedulers. Speedy Kernel comes in an unique AROMA package what allows you to choose your desired root management app and the desired modules installation.
Basic concept of this tweaked kernel is to provide you possible best performance and battery life.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel Features:
Based on Sony Latest Source Code: 6.1.1.B.1.54 / .56 / .75.
[*]Based on Linux Kernel Source Code: 3.0.75 (Latest to date).
[*]Aroma installer.
[*]SuperUser/SuperSu/Superuser(ClockworkMod) included.
[*]Compiled Using Linaro 4.8
[*]CWM touch recovery with working extra features.
[*]New Sony make.believe bootsplash.
[*]Init.d Support.
[*]Frandom support
[*]Ads free eXperience included.
[*]SmartOverclock upto 1.15 GHz.
[*]ZRAM/SWAP support.
[*]Auto Install for Wi-Fi Modules.
[*]Good Battery Life with elf.3 support.
[*]Deep sleep mode.
[*]Pre rooted.
[*]LZO Kernel Image Compression.
[*]Governors:
Dynamic Interactive
LulzactiveQ
SmartassV2
HotPlug
OndemandX
OndemandQ
Pegasusq
Adaptive
InteractiveX
Sakuractive
Lazy
Wheatley
Nightmare
MinMax
Interactive
Conservative
Ondemand
Userspace
Powersave
Performance
IO Schedulers:
noop
deadline
cfq
sio
vr
zen
NTFS Support
[*]CIFS Support
[*]Clean-Cache Support
--------------------------------------------------------------------------------------------
Video:
--------------------------------------------------------------------------------------------
Credits:
Munjeni for CWM touch recovery and help.
[*]FXP for ramdisk.
[*]amarullz for aroma.
[*]Sony for the source code.
[*] @dragxdk for Videos.
--------------------------------------------------------------------------------------------
Sources:
Github: source
--------------------------------------------------------------------------------------------
Always Remember:
Please Don't mirror my files, I like to keep track of download count.
Report Bugs with details and I will fix them as soon as possible.
If someone helps press thanks for him.
--------------------------------------------------------------------------------------------
Rules For Posting:
Don't post benchmark comparisons, It's against XDA rule.
Do not ask how to flash? Guide is there in post #3
Instead of saying thanks press the button it worths more.
Do not ask for ETA’s
--------------------------------------------------------------------------------------------
Downloads and Changelog: post #2
--------------------------------------------------------------------------------------------
Instructions, Guide and FAQ's: post #3
==================================================​If you all have a high regard for my tools, roms, kernels and feel my hardwork and time which I have poured in making these tools, roms and kernels is praiseworthy so do Rate this "awesome" thread 5 STARS and Leave plethora of THANKS..... Which I only ask in the name of donations!!!
Huge thanks to those that have already thanked!
And THANKS for constructive feedback - which makes Speedy so AMAZING!
Regards
Divaksh Jain
==================================================​
Click to expand...
Click to collapse

Download Speedy Sola Kernel - "The name is enough"
Download:
Speedy Kernel v5.5 : Post #145
Speedy Kernel v5.0 : 916(Stock)+584(CM9) Downloads
Speedy Kernel v4.2 : 206 Downloads
Speedy Kernel v4.1 : 166 Downloads
Speedy Kernel v4.0 : 78 Downloads
Speedy Kernel v3.0 : 549 Downloads
Speedy Kernel v2.1 : Not released.
Speedy Kernel v2.0 : 162 Downloads
Speedy Kernel v1.2 : 183 Downloads
Speedy Kernel v1.0 : 101 Downloads
Change Log:
Code:
====================================================
Speedy Kernel Change Log
====================================================
[B]Speedy Kernel v5.5 (1-05-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.75
-Linaro 4.8 Optimized
-Added Freq 600MHz in NON OC version
-CIFS, NTFS, FUSE module installation option in AROMA
-Added OTG module installation option in AROMA
-Fixed Frandom script
-Ramdisk Optimizations
-Boot time fixed
-Overall highly improved and stabilized
-Initial release for JB
[B]Speedy Kernel v5.0 (19-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.74
-Stock Version - Initial Release.
-AROMA installer (stock only)
-OC and NON OC version.
-Enabled ARCH_POWER
-Added Frandom
-5GHz band support added
-ZEN added back.
-Signal loss fixed.
-OTG fixed (not tested)
[B]Speedy Kernel v4.2 (16-04-2013)[/B]
-WiFi fixed.
-Enabled 80211 and WL12XX
[B]Speedy Kernel v4.1 (15-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.73
-Compliled using default CM configuration.
-Auto change max freq fixed(not sure)
-Improved battery life.
[B]Speedy Kernel v4.0 (14-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.71
-LINARO optimized
-Compiled Using Linaro 4.7
-Fixed OndemandQ governer
-Fixed Android OS battery drain
-Improved performance
[B]Speedy Kernel v3.0 (29-03-2013)[/B]
-Added Governers (Dynamic Interactive, Adaptive)
-Final fix for auto freq change.
-Final fix governer(Lazy, Sakuractive, OndemandX)
-Fixed OndemandX input.
-Removed Extra bytes from cmdline.
-Added Governers (Lulzactive, OndemandQ)
-Added Stability and Speed.
[B]Speedy Kernel v2.1 (27-03-2013)[/B]
-Fixed Superuser Permissions.
-Fixed OndemandX Input.
-Fixed Recovery input button for Xperia P(Now Volume UP).
-Added External SD support in Recovery Xperia Sola.
-Added Governer(Sakuractive).
[B]Speedy Kernel v2.0 (26-03-2013)[/B]
-Fixed Auto freq scaling change.
-Added CWM touch recovery.
-Added Governers(InteractiveX, LulzactiveQ, Lazy)
-Stability and Speed improved.
[B]Speedy Kernel v1.2 (23-03-2013)[/B]
-Added IO Schedulers(VR,SIO,Row,Zen)
-New Bootsplash - SONY make.believe
[B]Speedy Kernel v1.0 (22-03-2013) - My First Kernel :D[/B]
-Initial release.

Instructions, Guide and Tips n Tricks
How to flash kernel??
Method 1:
Download fastboot package and extract it and Place boot.img to fastboot folder.
Connect device in fastboot mode.
While device is power OFF: Volume Up + USB cable connected to PC
(BLUE LED will light up)
Open Command Prompt (Shift+Right mouse button) in Fastboot Folder
Write this commend and hit enter fastboot flash boot boot.img
Done
Method 2:
Download, Install FlashTool and Drivers(can be found in drivers folder)
Connect device in fastboot mode.
While device is power OFF: Volume Up + USB cable connected to PC
(BLUE LED will light up)
Launch flashtool, click on Flash(thunder icon).
Select fastboot mode and press ok > Select kernel to flash > browse and select the boot.img > Hit enter.
Done
Method 3:
Flash the zip(You need to be on a FXP's rom)
--------------------------------------------------------------------------------------------
F.A.Q's :-
How to enter in touch recovery?
>> Press volume up button one time just after LED flashes and vibration.
Is this working on blah blah?
>> I don't know. Do some research.
[*]Why I'm unable to flash kernel.
>>Is your bootloader unlocked? Flashing kernel required a unlocked bootloader.
[*]Battery drains like hell. WTF?
>> Not kernel problem. It's your apps that are waking up device from deep sleep.
[*]Is it pre-rooted ?
>> Yes it is, FXP's rom's also comes with superuser pre-installed.
[*]Does this kernel has X or Y mod?
>> Do some research. Check thread, repo, commits etc.
[*]Which governors/IO-schedulers to use?
>> Depends on your usage. See here for more info.
[*]I lost speedy kernel after new FXP's update?
>> You must have flashed new FXP's rom without removing boot.img, flash Speedy Kernel again.
[*]I need more info on something?
>> You can find all answers here, Google is our best friend.
--------------------------------------------------------------------------------------------
Tips and Tricks :-
Network Settings:-
Mobile Network > Network Type Selection> Select 2G (saves battery)
Personal Settings:-
Personal > Display > Brightness > Turn Auto Brightness Off (set to lowest, increase from toggle when needed)
Personal > Display > Sleep > 30sec is more than enough (saves battery)
Personal > Location Services > Off (turn on from toggle when needed... saves battery)
Personal > Accounts & sync > Off (switch on when needed... saves battery)
System Settings:-
Developers Options > User Interface > Force GPU Rendering > ON (increases performance)
Developers Options > User Interface > Windows Sale Animations > 0.5x (reduces lags if present)
Developers Options > Apps > Background Process Limit > 2 (can use your own number... gives you more ram other words releases ram)
Performance > Memory Management > zRam > 18% default (compress memory for increased virtual capacity)
Performance > Memory Management > Allow purging of assests > ON (allows the freeing of more ram when needed)
These above settings will help you increase performance & battery life!!

I found this, if i'm not wrong it's a commit for gpu clock control of Mali400, it's possible to add it in the next release?
https://github.com/chris41g/LoStKernel/commit/de45493b3fe2948581f2f554dfde6ab77979c83f

Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
How to install it?? I wanna be the first tester!!
Sent from my Galaxy Nexus using xda app-developers app

Sherwinnn said:
How to install it?? I wanna be the first tester!!
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Sorry but you're not the first
Quadrant flies with 2883 pts with this kernel on Xperience V5.

Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
Eth4n said:
Sorry but you're not the first
Quadrant flies with 2883 pts with this kernel on Xperience V5.
Click to expand...
Click to collapse
How to install it?
Sent from my Galaxy Nexus using xda app-developers app

Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
Sherwinnn said:
How to install it?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Have you read the post no 2.....
Instructions are mentioned.....
Sent from my Xperia Sola using xda app-developers app

Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
@[email protected] said:
Have you read the post no 2.....
Instructions are mentioned.....
Sent from my Xperia Sola using xda app-developers app
Click to expand...
Click to collapse
Oh.... Thanks!! I seriously missed that post... Hahaha
Sent from my Galaxy Nexus using xda app-developers app

Eth4n said:
I found this, if i'm not wrong it's a commit for gpu clock control of Mali400, it's possible to add it in the next release?
https://github.com/chris41g/LoStKernel/commit/de45493b3fe2948581f2f554dfde6ab77979c83f
Click to expand...
Click to collapse
Thanks.
Will check and try to add it in next release.
Download link updated to new version.
What is new?
>>Nothing, expect new Sony make.believe boot splash.
Happy Flashing.

Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
what CPU governor and i/o scheduler did you recommends for better performance and battery life on cm9?
Sent from マユロイド via xda premium

also try to make kernel for stock based.

Dev, should I charge my battery to 100% before flashing the kernel ?

mkoev said:
Dev, should I charge my battery to 100% before flashing the kernel ?
Click to expand...
Click to collapse
100% charging not required but ensure battery has enough power to boot up or handle bootloop in case (Over 25%)
---------- Post added at 02:37 PM ---------- Previous post was at 02:33 PM ----------
itachilinux said:
what CPU governor and i/o scheduler did you recommends for better performance and battery life on cm9?
Sent from マユロイド via xda premium
Click to expand...
Click to collapse
Already in your signatures and this has been recommended by FXP himself search CM 9.1 forum.
I still have to try this kernel and looks promising to me in Rachit's Kernel battery was way better comparing to FXP Original Kernel.
Good Work Jain Sahab good to see you in real development :laugh::laugh::laugh:

Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
lalit387 said:
Already in your signatures and this has been recommended by FXP himself search CM 9.1 forum.
I still have to try this kernel and looks promising to me in Rachit's Kernel battery was way better comparing to FXP Original Kernel.
Good Work Jain Sahab good to see you in real development :laugh::laugh::laugh:
Click to expand...
Click to collapse
LEL, just want to explore more bro...
Sent from マユロイド via xda premium

Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
itachilinux said:
LEL, just want to explore more bro...
Sent from マユロイド via xda premium
Click to expand...
Click to collapse
Try exploring with using kernel and different combos of governors and io schedulers.....
And let us also know what you conclude..... :thumbup:
Sent from my Xperia Sola using xda app-developers app

Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
@[email protected] said:
Try exploring with using kernel and different combos of governors and io schedulers.....
And let us also know what you conclude..... :thumbup:
Sent from my Xperia Sola using xda app-developers app
Click to expand...
Click to collapse
ok sir, i will report it asap
Sent from マユロイド via xda premium

Flashed successfully.
Will try the Wheatley governors + sio
Hey Dev, why does no frills show only 3 schedulers ? I can only see noop, deadline and cfq.
Your PO says:
IO Schedulers:
VR
SIO
Row
Zen
Deadline
CFQ

ianjay06 said:
also try to make kernel for stock based.
Click to expand...
Click to collapse
Will try soon, need time.
lalit387 said:
Good Work Jain Sahab good to see you in real development :laugh::laugh::laugh:
Click to expand...
Click to collapse
Thank you.. <3 :*
mkoev said:
Flashed successfully.
Will try the Wheatley governors + sio
Hey Dev, why does no frills show only 3 schedulers ? I can only see noop, deadline and cfq.
Your PO says:
IO Schedulers:
VR
SIO
Row
Zen
Deadline
CFQ
Click to expand...
Click to collapse
Thanks for letting me know, I think I forgot to implement schedulers, will release update soon.
updating OP.

Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
Thanks DIVAKSH for making awesome Rom and kernels!!!
Sent from my Galaxy Nexus using xda app-developers app

Related

【KERNEL】 【CM9】 Speedy U v5.0 - "The name is enough" 【CWM Touch】 【LINARO】

【KERNEL】 【CM9】 Speedy U v5.0 - "The name is enough" 【CWM Touch】 【LINARO】
Speedy Kernel for CM9 roms
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel Features:
Based on Sony Latest Source Code: 6.1.1.B.1.54 / .56 / .75.
[*]Based on Linux Kernel Source Code: 3.0.74 (Latest to date).
[*]Compiled Using Linaro 4.7
[*]CWM touch recovery with working extra features.
[*]New Sony make.believe bootsplash.
[*]Init.d Support.
[*]SmartOverclock upto 1.15 GHz.
[*]ZRAM/SWAP support.
[*]Auto Install for Wi-Fi Modules.
[*]Good Battery Life with elf.3 support.
[*]Deep sleep mode.
[*]Pre rooted.
[*]LZO Kernel Image Compression.
[*]Governors:
Dynamic Interactive
LulzactiveQ
SmartassV2
HotPlug
OndemandX
OndemandQ
Pegasusq
Adaptive
InteractiveX
Sakuractive
Lazy
Wheatley
Nightmare
MinMax
Interactive
Conservative
Ondemand
Userspace
Powersave
Performance
IO Schedulers:
noop
deadline
cfq
sio
vr
zen
NTFS Support
[*]CIFS Support
[*]Clean-Cache Support
--------------------------------------------------------------------------------------------
Credits:
Munjeni for CWM touch recovery and help.
[*]FXP for ramdisk.
[*]M4ST3R-V for logo.
[*]Sony for the source code.
--------------------------------------------------------------------------------------------
Sources:
Github: source
--------------------------------------------------------------------------------------------
Always Remember:
Please Don't mirror my files, I like to keep track of download count.
Report Bugs in this thread and I will fix them as soon as possible.
If you like my kernel please rate it and press some thanks.
--------------------------------------------------------------------------------------------
Rules For Posting:
Don't post benchmark comparisons, It's against XDA rule.
Do not ask how to flash? Guide is there in post #3
Instead of saying thanks press the button it worths more.
Do not ask for ETA’s
--------------------------------------------------------------------------------------------
Downloads and Changelog: post #2
--------------------------------------------------------------------------------------------
Instructions, Guide and FAQ's: post #3
==================================================​If you all have a high regard for my tools, roms, kernels and feel my hardwork and time which I have poured in making these tools, roms and kernels is praiseworthy so do Rate this "awesome" thread 5 STARS and Leave plethora of THANKS..... Which I only ask in the name of donations!!!
Huge thanks to those that have already thanked!
And THANKS for constructive feedback - which makes Speedy so AMAZING!
Regards
Divaksh Jain
==================================================​
Click to expand...
Click to collapse
Download Speedy U Kernel for Sony Xperia U
Download:
Speedy Kernel v5.0 : Boot.img || Flashable.zip
Speedy Kernel v4.2 : 375 Downloads
Speedy Kernel v4.1 : 565 Downloads
Speedy Kernel v4.0 : Not released.
Speedy Kernel v3.0 : 381 Downloads
Speedy Kernel v2.1 : 282 Downloads.
Speedy Kernel v2.0 : Not released.
Speedy Kernel v1.2 : 103 Downloads
Speedy Kernel v1.0 : Not released.
Change Log:
Code:
====================================================
[B]Speedy Kernel Change Log[/B]
====================================================
[B]Speedy Kernel v5.0 (19-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.74
-Stock Version - Initial Release.
-AROMA installer (stock only)
-OC and NON OC version.
-Enabled ARCH_POWER
-Added Frandom
-5GHz band support added
-ZEN added back.
-Signal loss fixed.
-OTG fixed (not tested)
[B]Speedy Kernel v4.2 (16-04-2013)[/B]
-WiFi fixed.
-Enabled 80211 and WL12XX
[B]Speedy Kernel v4.1 (15-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.73
-Compliled using default CM configuration.
-Auto change max freq fixed(not sure)
-Improved battery life.
[B]Speedy Kernel v4.0 (14-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.71
-LINARO optimized
-Compiled Using Linaro 4.7
-Fixed OndemandQ governer
-Fixed Android OS battery drain
-Improved performance
[B]Speedy Kernel v3.0 (29-03-2013)[/B]
-Added Governers (Dynamic Interactive, Adaptive)
-Final fix for auto freq change.
-Final fix governer(Lazy, Sakuractive, OndemandX)
-Fixed OndemandX input.
-Removed Extra bytes from cmdline.
-Added Governers (Lulzactive, OndemandQ)
-Added Stability and Speed.
[B]Speedy Kernel v2.1 (27-03-2013)[/B]
-Fixed Superuser Permissions.
-Fixed OndemandX Input.
-Fixed Recovery input button for Xperia P(Now Volume UP).
-Added External SD support in Recovery Xperia Sola.
-Added Governer(Sakuractive).
[B]Speedy Kernel v2.0 (26-03-2013)[/B]
-Fixed Auto freq scaling change.
-Added CWM touch recovery.
-Added Governers(InteractiveX, LulzactiveQ, Lazy)
-Stability and Speed improved.
[B]Speedy Kernel v1.2 (23-03-2013)[/B]
-Added IO Schedulers(VR,SIO,Row,Zen)
-New Bootsplash - SONY make.believe
[B]Speedy Kernel v1.0 (22-03-2013)[/B] - My First Kernel :D
-Initial release.
Instructions, Guide and Tips n Tricks
How to flash kernel??
Method 1:
Download fastboot package and extract it and Place boot.img to fastboot folder.
Connect device in fastboot mode.
While device is power OFF: Volume Up + USB cable connected to PC
(BLUE LED will light up)
Open Command Prompt (Shift+Right mouse button) in Fastboot Folder
Write this commend and hit enter fastboot flash boot boot.img
Done
Method 2:
Download, Install FlashTool and Drivers(can be found in drivers folder)
Connect device in fastboot mode.
While device is power OFF: Volume Up + USB cable connected to PC
(BLUE LED will light up)
Launch flashtool, click on Flash(thunder icon).
Select fastboot mode and press ok > Select kernel to flash > browse and select the boot.img > Hit enter.
Done
Method 3:
Flash the zip(You need to be on a FXP's rom)
--------------------------------------------------------------------------------------------
F.A.Q's :-
How to enter in touch recovery?
>> Press volume up button one time just after LED flashes and vibration.
Is this working on blah blah?
>> I don't know. Do some research.
[*]Why I'm unable to flash kernel.
>>Is your bootloader unlocked? Flashing kernel required a unlocked bootloader.
[*]Battery drains like hell. WTF?
>> Not kernel problem. It's your apps that are waking up device from deep sleep.
[*]Is it pre-rooted ?
>> Yes it is, FXP's rom's also comes with superuser pre-installed.
[*]Does this kernel has X or Y mod?
>> Do some research. Check thread, repo, commits etc.
[*]Which governors/IO-schedulers to use?
>> Depends on your usage. See here for more info.
[*]I lost speedy kernel after new FXP's update?
>> You must have flashed new FXP's rom without removing boot.img, flash Speedy Kernel again.
[*]I need more info on something?
>> You can find all answers here, Google is our best friend.
--------------------------------------------------------------------------------------------
Tips and Tricks :-
Network Settings:-
Mobile Network > Network Type Selection> Select 2G (saves battery)
Personal Settings:-
Personal > Display > Brightness > Turn Auto Brightness Off (set to lowest, increase from toggle when needed)
Personal > Display > Sleep > 30sec is more than enough (saves battery)
Personal > Location Services > Off (turn on from toggle when needed... saves battery)
Personal > Accounts & sync > Off (switch on when needed... saves battery)
System Settings:-
Developers Options > User Interface > Force GPU Rendering > ON (increases performance)
Developers Options > User Interface > Windows Sale Animations > 0.5x (reduces lags if present)
Developers Options > Apps > Background Process Limit > 2 (can use your own number... gives you more ram other words releases ram)
Performance > Memory Management > zRam > 18% default (compress memory for increased virtual capacity)
Performance > Memory Management > Allow purging of assests > ON (allows the freeing of more ram when needed)
These above settings will help you increase performance & battery life!!
Divaksh said:
[*]Method 3:
Flash the zip -coming soon
Click to expand...
Click to collapse
I know is a noob question, but flashable zip will theorically work on locked bootloaders?. Thanks in advance
R: 【KERNEL】【CM9】Speedy Kernel v1.1【24-03-2013】
blackkzero said:
I know is a noob question, but flashable zip will theorically work on locked bootloaders?. Thanks in advance
Click to expand...
Click to collapse
You cant touch kernel partition without unlocking,sorry
Will my device be overclocked the moment I install this kernel?
After flashing this,my phone doesnt even start,doesnt do nothing except volup and voldown.
Phone doesn't even get to boot screen, I'm using slim rom cm9.
zootzoot said:
Phone doesn't even get to boot screen, I'm using slim rom cm9.
Click to expand...
Click to collapse
Same here,i guess next time ill wait for feedback before using anything. Thanks for the lesson.
Re: 【KERNEL】【CM9】Speedy Kernel v1.1【24-03-2013】
xhk_sk said:
After flashing this,my phone doesnt even start,doesnt do nothing except volup and voldown.
Click to expand...
Click to collapse
zootzoot said:
Phone doesn't even get to boot screen, I'm using slim rom cm9.
Click to expand...
Click to collapse
I think something is missing, will repair it tomorrow.
I don't own device, so will need testers.
interested people add me on FB(http://fb.me/Divaksh)
Sent from my Xperia Sola using xda premium
Re: 【KERNEL】【CM9】Speedy Kernel v1.1【24-03-2013】
Divaksh said:
I think something is missing, will repair it tomorrow.
I don't own device, so will need testers.
interested people add me on FB(http://fb.me/Divaksh)
Sent from my Xperia Sola using xda premium
Click to expand...
Click to collapse
I've added you and sent you a message on Fb.
Thanks
Sent from my Xperia U using xda premium
I am ready to help though I don't have vast amt of knowledge about Android..
Link and OP updated, thanks to Mayank.
Divaksh said:
Link and OP updated, thanks to Mayank.
Click to expand...
Click to collapse
Ive been testing for around 2 hrs on this ROM [LINARO][4.0.4] SlimCM™ - built from source [XU] - Build 20130324.
No reboots and recovery works fine.
R: 【KERNEL】【CM9】Speedy Kernel v1.1【24-03-2013】
Can you add linaro?
Re: 【KERNEL】【CM9】Speedy Kernel v1.1【24-03-2013】
zootzoot said:
Ive been testing for around 2 hrs on this ROM [LINARO][4.0.4] SlimCM™ - built from source [XU] - Build 20130324.
No reboots and recovery works fine.
Click to expand...
Click to collapse
Mayank has tested it, it's working fine. I'll have to wait for more replies as I don't own device.
GEKTHEBOSS said:
Can you add linaro?
Click to expand...
Click to collapse
Bro it is Linaro optimized.
Sent from my Xperia Sola using xda premium
Divaksh said:
Mayank has tested it, it's working fine. I'll have to wait for more replies as I don't own device.
I'm testing it on Slim Rom latest version...till now all is ok playing Real Racing 3 ..very smooth
Click to expand...
Click to collapse
Can someone try version 2.1 and report me?
Thanks
Divaksh said:
Can someone try version 2.1 and report me?
Thanks
Click to expand...
Click to collapse
Will try it when I get Home (in about 1 - 1.5 hours maybe)...
Divaksh said:
Can someone try version 2.1 and report me?
Thanks
Click to expand...
Click to collapse
I'm flashin it now...I'll inform you soon
CWM works good, but there are these messages:
'e: Missing bitmap b4,b5,b6,b7,b8,a10'
and touch buttons don't work.
It boots ! do you want to know something in particular?
I noticed a huge usage of RAM: it stays on 30/50m Mb, while before I've 100/120 Mb with the same apps in background
But after ran zipalign and sqlite script, my free ram is back, sorry

[KERNEL]Nemesis Kernel v2.1 Updated 18/4/2013 /Linaro Optimized/Fast/Minimal/

Nemesis Kernel for Stock or Stock Based Roms​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Special thanks to ZenorGR for making the logo for NEMESIS KERNEL by OLYMPUS TEAM​
Hello everyone..We are a team with nicolassp (OLYMPUS TEAM) and I will undertake the releases of nemesis kernel for Xperia Sola devices..OLYMPUS TEAM promises divine uploads
Features :
Based on Sony Latest Source Code: 6.1.1.B.1.54 / .56 / .75/ .89
Based on 3.0.8 kernel
Linaro Optimized
Init.d support
Wifi Modules built in
Auto root service
CWM recovery 6.0.1.2
Ext2/3/4 && Ntfs read/write support
Zram and zcache enabled
Clean-cache support
APM emulation
Supports swap
Automatic process group scheduling
SLUB allocator
Greater Deep Sleep state to be more battery friendly
CIFS support
Removed un-needed features and debugs
Latest mali drivers r3p2-01rel1 compiled
Many many many more optimizations and tweaks
Governors included :
Performance
Powersave
Ondemand
Interactive
Wheatley
Hotplug
MinMax
Nightmare
OndemandX
PegasusQ
Smartass2
IO Schedulers included :
Noop
Deadline
CFQ
Row
Sio
VR
Zen
How to flash Nemesis Kernel
Unlock your bootloader using instructions here http://unlockbootloader.sonymobile.com/instructions
Download the fastboot package below and extract it somewhere e.g. your Desktop
Copy nemesis.elf to the same folder
Open cmd and enter fastboot directory
Write "fastboot flash boot nemesis.elf" and press enter
It will show you "Waiting for device"
Power off your phone and press the volume up button while you connect the usb
It should be flashed okay
Reboot and Wipe Cache and Dalvik Cache
YOU MUST UPDATE MALI USERSPACE LIBRARIES TO AVOID PROBLEMS!!! PLEASE ALL FLASH THE CWM PATCH PROVIDED BELOW.(IF YOU ARE USING ENIGMA ROM V2.0 THEN THERE IS NO NEED TO FLASH IT)
Downloads
Download Nemesis Kernel v2.1 : http://www.mediafire.com/?fal3hz1ct2fa65g
Download Nemesis_CWM_Flash v2.1 : http://www.mediafire.com/?f1pmbd4isdimrcf
Download [CWM]Mali_Userspace_Libraries : http://www.mediafire.com/download.php?469dil56w5fn1ps
Download fastboot package : http://www.mediafire.com/?pu4o83eycyo1058
GITHUB SOURCES
Credits
DoomLord for providing ramdisk with init.d support and CWM
Special thanks to ZenorGR for making the logo for NEMESIS KERNEL by OLYMPUS TEAM
I logged in and i saw 431 pm's asking me to update the rom i released yesterday!! Guys me and nicolassp are spending endless hours in a daily basis to develop and offer you the best we can but you can show your appreciation also by donating a small amount.The rom is downloaded from almost 11000 users.If each user donates 0,5 or 1 euro although this amount is small it will give us a reason to work harder and harder to support you. Please consider it and do not forget to press the thanks button also.We wish you happy flashing..OLYMPUS TEAM
Change log 5/4/2013 Nemesis v1.3
Fixed Usb Tethering
Decreased Power Consumption further and optimzed DDR consuption
Increased graphics performance a bit
Optimized TCP/IP stack, so browsing will be very fast and responsive
Increased frame buffer so UI will be much faster
Fixed Battery Drainage issue (although it was small drain)
Fixed CWM issue
Many more optimizations...
Changes to governors :
Fixed Nightmare governor
Re-optimized Hotplug governor
Fixed LulzactiveQ governor
Updated Wheatley governor again
Updated InteractiveX governor
New governors included :
Lazy (Updated and Tweaked)
Sakuractive
Lulzactive (Updated and Tweaked)
LulzactiveQ (Updated and Tweaked)
OndemandQ
InteractiveX (Updated and Tweaked)
Conservative
Change log 12/4/2013 Nemesis v2.0
Fixed USB OTG
Optimized further battery life
Added VPN support with L2TP support and deflate compression
Some under the hood improvements (faster GPS lock and more..)
Changes to governors :
Added Scary governor
Added Lionheart governor
Added HotplugX governor
Removed Hotplug governor
Updated Lazy governor
Updated Sakuractive governor
Updated Lulzactive governor
Updated LulzactiveQ governor
Updated Smartass2 governor
Updated PegasusQ governor
Updated OndemandX governor
Updated OndemandQ governor
Updated Nightmare governor
Updated Minmax governor
Updated InteractiveX governor
Updated Interactive governor
Updated Wheatley governor
Change log 18/4/2013 Nemesis v2.1
MAC address bug fixed
Reduced battery drain due to wi-fi
Some minor additions
P.S.: Early versions (v1.0-v.1.9 have been skipped)
EDIT:This version has been tested and confirmed to work well in Xperia Sola devices..Thanks a lot..
Boots. :laugh:
Pls,remove that bootscreen -.-
No OC?
Mali update is for last stock?
Thanks for this kernel...have been waiting for this.downloading right now.
Eth4n said:
Boots. :laugh:
Pls,remove that bootscreen -.-
No OC?
Mali update is for last stock?
Click to expand...
Click to collapse
We will not remove the bootscreen.-.- -.- -.- We like it !!!!! And yes no OC for the moment..Mali is for latest stock or not
I'm very happy to see this kernel for our sola! The reviews at XP thread are great! We hope to see a cm based kernel soon
Thanks a lot for developing this keep up the good work!
Sent from my Xperia Sola using xda premium
Kernel Boots up and yes working fine..
Can i know what changes Latest mali drivers r3p2-01rel1 would make? better gaming experiance? Oc the GPU?
Thanks
Awesome! Gonna try it right now and see what's inside this kernel!
Sent from my C6603 using xda premium
---------- Post added at 12:01 PM ---------- Previous post was at 11:59 AM ----------
Flashed it. What's inside this kernel: PERFORMANCE. I like the bootlogo, but it still can have some improvements. Thanks for this kernel! Please add 1.3 GHz OC in the next release, and maybe GPU OC?
Sent from my C6603 using xda premium
Thank you so much for your hard work and efforts!!
we really appreciate it !!
Downloading now! :good::good::good:
Good to have a variety of Kernels to choose from,thanks to you guys !!!!
hey bro? is it for xperia go too?
ehl.ey14 said:
hey bro? is it for xperia go too?
Click to expand...
Click to collapse
If you flash this kernel on your go, you'll probably get bootloop, although xperia go and sola have the same specs with smaller screen and water resistance. Please wait for the devs to release the go version.
Sent from my C6603 using xda premium
Dev, do you expect to release a kernel for CN based roms ?
-shaMe- said:
Kernel Boots up and yes working fine..
Can i know what changes Latest mali drivers r3p2-01rel1 would make? better gaming experiance? Oc the GPU?
Thanks
Click to expand...
Click to collapse
Latest mali driver offers advanced performance in 3D applications,so yes it is for better gaming experience..
(OC on the GPU has also been added-267 MHz)
mkoev said:
Dev, do you expect to release a kernel for CN based roms ?
Click to expand...
Click to collapse
A lot of people have asked this,so a CyanogenMod version is on it's way..
Vinardo_ZzZ 2000 said:
Awesome! Gonna try it right now and see what's inside this kernel!
Sent from my C6603 using xda premium
---------- Post added at 12:01 PM ---------- Previous post was at 11:59 AM ----------
Flashed it. What's inside this kernel: PERFORMANCE. I like the bootlogo, but it still can have some improvements. Thanks for this kernel! Please add 1.3 GHz OC in the next release, and maybe GPU OC?
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
This is also a general request..We will look into it..
My request is maybe "too much" but..... I think that there are a lot of users like me, who don't want OC...
could u please release a second version which will support OC? That way we will have 2 versions.. One with oc and one without....
Eagerly waiting for CM based kernel!
Thanks in advance!
Sent from my Xperia Sola using xda premium
chrizer4 said:
My request is maybe "too much" but..... I think that there are a lot of users like me, who don't want OC...
could u please release a second version which will support OC? That way we will have 2 versions.. One with oc and one without....
Eagerly waiting for CM based kernel!
Thanks in advance!
Sent from my Xperia Sola using xda premium
Click to expand...
Click to collapse
Don't worry mate..There will be just one kernel version but it will offer the ability to choose your own desired frequency..
cpascal7 said:
Don't worry mate..There will be just one kernel version but it will offer the ability to choose your own desired frequency..
Click to expand...
Click to collapse
Well, the problem is that in the most kernels, there is a bug and freq will always stay at max (the one that OC provides) no matter what you choose.. If you manage to fix it, then its ok
Thanks again!
Sent from my Xperia Sola using xda premium
chrizer4 said:
My request is maybe "too much" but..... I think that there are a lot of users like me, who don't want OC...
could u please release a second version which will support OC? That way we will have 2 versions.. One with oc and one without....
Eagerly waiting for CM based kernel!
Thanks in advance!
Sent from my Xperia Sola using xda premium
Click to expand...
Click to collapse
I am eagerly waiting for CM version too, without OC.
chrizer4 said:
Well, the problem is that in the most kernels, there is a bug and freq will always stay at max (the one that OC provides) no matter what you choose.. If you manage to fix it, then its ok
Thanks again!
Sent from my Xperia Sola using xda premium
Click to expand...
Click to collapse
Yes, i saw that too buddy.
Guys could u add under volting as well or oc the gpu driver?
Mokiwipeout said:
Guys could u add under volting as well or oc the gpu driver?
Click to expand...
Click to collapse
Me too (+1)
Sent from my C6603 using xda premium

【KERNEL】【CM10/JB】 Speedy Sola v5.5 - "The name is enough" 【CWM Touch】 【AROMA】 【1/5】

【KERNEL】【CM10/JB】 Speedy Sola v5.5 - "The name is enough" 【CWM Touch】 【AROMA】 【1/5】
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel Features:
Based on Sony Latest Source Code: 6.1.1.B.1.54 / .56 / .75.
[*]Based on Linux Kernel Source Code: 3.0.75 (Latest to date).
[*]Aroma installer.
[*]SuperUser/SuperSu/Superuser(ClockworkMod) included.
[*]Compiled Using Linaro 4.8
[*]CWM touch recovery with working extra features.
[*]New Sony make.believe bootsplash.
[*]Init.d Support.
[*]Frandom support
[*]Ads free eXperience included.
[*]SmartOverclock upto 1.15 GHz.
[*]ZRAM/SWAP support.
[*]Auto Install for Wi-Fi Modules.
[*]Good Battery Life with elf.3 support.
[*]Deep sleep mode.
[*]Pre rooted.
[*]LZO Kernel Image Compression.
[*]Governors:
Dynamic Interactive
LulzactiveQ
SmartassV2
HotPlug
OndemandX
OndemandQ
Pegasusq
Adaptive
InteractiveX
Sakuractive
Lazy
Wheatley
Nightmare
MinMax
Interactive
Conservative
Ondemand
Userspace
Powersave
Performance
IO Schedulers:
noop
deadline
cfq
sio
vr
zen
NTFS Support
[*]CIFS Support
[*]Clean-Cache Support
--------------------------------------------------------------------------------------------
Credits:
Munjeni for CWM touch recovery and help.
[*]FXP for ramdisk.
[*]amarullz for aroma.
[*]Sony for the source code.
--------------------------------------------------------------------------------------------
Sources:
Github: source
--------------------------------------------------------------------------------------------
Always Remember:
Please Don't mirror my files, I like to keep track of download count.
Report Bugs with details and I will fix them as soon as possible.
If someone helps press thanks for him.
--------------------------------------------------------------------------------------------
Rules For Posting:
Don't post benchmark comparisons, It's against XDA rule.
Do not ask how to flash? Guide is there in post #3
Instead of saying thanks press the button it worths more.
Do not ask for ETA’s
--------------------------------------------------------------------------------------------
Downloads and Changelog: post #2
--------------------------------------------------------------------------------------------
Instructions, Guide and FAQ's: post #3
==================================================​If you all have a high regard for my tools, roms, kernels and feel my hardwork and time which I have poured in making these tools, roms and kernels is praiseworthy so do Rate this "awesome" thread 5 STARS and Leave plethora of THANKS..... Which I only ask in the name of donations!!!
Huge thanks to those that have already thanked!
And THANKS for constructive feedback - which makes Speedy so AMAZING!
Regards
Divaksh Jain
==================================================​
Click to expand...
Click to collapse
Download:
Speedy Kernel v5.5 : Click Here
Speedy Kernel v5.0 : 816 Downloads.
Change Log:
Code:
====================================================
[B]Speedy Kernel Change Log[/B]
====================================================
[B]Speedy Kernel v5.5 (1-05-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.75
-Linaro 4.8 Optimized
-Added Freq 600MHz in NON OC version
-CIFS, NTFS, FUSE module installation option in AROMA
-Added OTG module installation option in AROMA
-Fixed Frandom script
-Ramdisk Optimizations
-Boot time fixed
-Overall highly improved and stabilized
-Initial release for JB
[B]Speedy Kernel v5.0 (19-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.74
-Stock Version - Initial Release.
-AROMA installer (stock only)
-OC and NON OC version.
-Enabled ARCH_POWER
-Added Frandom
-5GHz band support added
-ZEN added back.
-Signal loss fixed.
-OTG fixed (not tested)
[B]Speedy Kernel v4.2 (16-04-2013)[/B]
-WiFi fixed.
-Enabled 80211 and WL12XX
[B]Speedy Kernel v4.1 (15-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.73
-Compliled using default CM configuration.
-Auto change max freq fixed(not sure)
-Improved battery life.
[B]Speedy Kernel v4.0 (14-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.71
-LINARO optimized
-Compiled Using Linaro 4.7
-Fixed OndemandQ governer
-Fixed Android OS battery drain
-Improved performance
[B]Speedy Kernel v3.0 (29-03-2013)[/B]
-Added Governers (Dynamic Interactive, Adaptive)
-Final fix for auto freq change.
-Final fix governer(Lazy, Sakuractive, OndemandX)
-Fixed OndemandX input.
-Removed Extra bytes from cmdline.
-Added Governers (Lulzactive, OndemandQ)
-Added Stability and Speed.
[B]Speedy Kernel v2.1 (27-03-2013)[/B]
-Fixed Superuser Permissions.
-Fixed OndemandX Input.
-Fixed Recovery input button for Xperia P(Now Volume UP).
-Added External SD support in Recovery Xperia Sola.
-Added Governer(Sakuractive).
[B]Speedy Kernel v2.0 (26-03-2013)[/B]
-Fixed Auto freq scaling change.
-Added CWM touch recovery.
-Added Governers(InteractiveX, LulzactiveQ, Lazy)
-Stability and Speed improved.
[B]Speedy Kernel v1.2 (23-03-2013)[/B]
-Added IO Schedulers(VR,SIO,Row,Zen)
-New Bootsplash - SONY make.believe
[B]Speedy Kernel v1.0 (22-03-2013)[/B] - My First Kernel :D
-Initial release.
How to flash Speedy Stock kernel??
Copy it to your phone's SD Card.
Flash Speedy Kernel zip via CWM.
AROMA Installer will launch and then, you can select the options you want.
Reboot and Done!!
NOTE: in case it doesn't boot see post #33
(press thanks for @pukhrajsoni)
Thanks to @dragxdk
==================================================
F.A.Q's :-
How to enter in touch recovery?
>> Press volume up button one time just after LED flashes and vibration.
Is this working on blah blah?
>> I don't know. Do some research.
[*]Why I'm unable to flash kernel.
>>Is your bootloader unlocked? Flashing kernel required a unlocked bootloader.
[*]Battery drains like hell. WTF?
>> Not kernel problem. It's your apps that are waking up device from deep sleep.
[*]Is it pre-rooted ?
>> Yes it is, It also comes with Superuser/SuperSu/SuperUser(ClockworkMod) pre-installed.
[*]Does this kernel has X or Y mod?
>> Do some research. Check thread, repo, commits etc.
[*]Which governors/IO-schedulers to use?
>> Depends on your usage. See here for more info.
[*]I lost speedy kernel after new rom installation?
>> You must have flashed new rom contains kernel, flash Speedy Kernel again.
[*]I need more info on something?
>> You can find all answers here, Google is our best friend.
==================================================
Settings to increase performance & battery life!!
System
Settings -> Developer Options -> Force GPU 2D Rendering (Get better graphics score for 2D graphics)
Settings -> Developers Options -> User Interface -> Windows Sale Animations -> 0.5x (Reduces lags if present)
Settings -> Developers Options -> Apps -> Background Process Limit -> 2 (Can use your own number... Gives you more ram other words releases ram)
---------------------------------------------------------------------------------------
Wireless & Networks
Settings -> More... -> Mobile Networks > Network Mode -> GSM only (Saves battery)
Settings -> More... -> Mobile Networks > Data Enabled -> untick (Turn on from toggle when needed, saves battery)
---------------------------------------------------------------------------------------
Device
Settings -> Sound -> Vibrate on touch -> untick (Improve performance, saves battery)
Settings -> Display -> Sleep -> 30 seconds is more than enough (Saves battery)
Settings -> Display -> Brightness -> Auto brightness on with minimum brightness (Increase when needed from slider control, saves battery)
---------------------------------------------------------------------------------------
Personal
Settings -> Accounts & Sync -> Turn off (Sync manually when needed, saves battery)
Settings -> Location Services -> Turn off (Turn on from toggle when needed, saves battery)
Thank You so much for the Kernel luved ur CM KERNEL
Hope its Of Same Quality
what is SIO, I mean when ppl talk about governers the write for example "interactivex+sio"
I put the interactivex governer and put 200-800 frequencies but what is SIO mean?
sry for the bad English.
Good job,great dev!!! :thumbup:
tapatalk
dude! big mistake! in the title of this thread it's says "stock" but in the headline (the first row) of your post is says "for cm9 roms"!
I just had to flash the stock rom and now I'm installing the all thing from the start!
lsd95 said:
what is SIO, I mean when ppl talk about governers the write for example "interactivex+sio"
I put the interactivex governer and put 200-800 frequencies but what is SIO mean?
sry for the bad English.
Click to expand...
Click to collapse
It's scheduler
Sent from my MT27i using Tapatalk 2
Boot stuck up at SONY logo :-S
Switched back to my old kernel
Sent from my MT27i using Tapatalk 2
File removed from mediafire...!!!
ashwin prabhunerurkar said:
Thank You so much for the Kernel luved ur CM KERNEL
Hope its Of Same Quality
Click to expand...
Click to collapse
My pleasure.
And its better than CM version.
dragxdk said:
Good job,great dev!!! :thumbup:
tapatalk
Click to expand...
Click to collapse
Thanks man.
lsd95 said:
dude! big mistake! in the title of this thread it's says "stock" but in the headline (the first row) of your post is says "for cm9 roms"!
I just had to flash the stock rom and now I'm installing the all thing from the start!
Click to expand...
Click to collapse
Thanks for leting me know. I forgot to edit OP.(copy paste thing)
pukhrajsoni said:
Boot stuck up at SONY logo :-S
Switched back to my old kernel
Sent from my MT27i using Tapatalk 2
Click to expand...
Click to collapse
Just tested.. It boots, works like charm.
It is for stock roms not for CM roms, hope you installed it on stock rom.
behzad.bz said:
File removed from mediafire...!!!
Click to expand...
Click to collapse
Both links updated. :victory:
Enjoy.. happy flashing.
Works good, will u add 100 and 600mhz steps too?
Flashed your kernel via AROMA Installer. My phone boots up but stuck at bootlogo. It's the same problem if I flash a CM kernel on a stock rom. Any ideas?
what is OC and NON OC ?
which one should i install?
HassanTakno said:
what is OC and NON OC ?
which one should i install?
Click to expand...
Click to collapse
OC stands for "Overclock" and NON OC stands for "Non Overclock". Ok, let's say, our device have 1GHz processor, with the OC kernel, you can make your device's processor clock at 1.15GHz.
I ve installed oc and it works perfectly!!!
tapatalk
---------- Post added at 11:27 AM ---------- Previous post was at 11:20 AM ----------
Divaksh, i need some help bro please, if i want to remove bootanimation, i must to edit build prop and change value 1/0 on the line of bootanim proprieties...??
Installation and demo of speedy kernel v.5 OC
tapatalk
not working with stock rom
I have tried both version, both are not working
Non OC: boot stuck up at sony logo
OC: bricked my sola, had to re-flash stock ftf :crying:
Eth4n said:
Works good, will u add 100 and 600mhz steps too?
Click to expand...
Click to collapse
In next release.
Vinardo_ZzZ 2000 said:
Flashed your kernel via AROMA Installer. My phone boots up but stuck at bootlogo. It's the same problem if I flash a CM kernel on a stock rom. Any ideas?
Click to expand...
Click to collapse
What rom you are using? and never flash cm kernel over stock rom both have different-different ramdisk.
dragxdk said:
I ve installed oc and it works perfectly!!!
tapatalk
---------- Post added at 11:27 AM ---------- Previous post was at 11:20 AM ----------
Divaksh, i need some help bro please, if i want to remove bootanimation, i must to edit build prop and change value 1/0 on the line of bootanim proprieties...??
Installation and demo of speedy kernel v.5 OC
tapatalk
Click to expand...
Click to collapse
Thanks and like always nice work man.. :good:
If your device is rooted go into /system/media/
If there is a a file called bootanimation.zip you can delete or rename it to bootanimation.zip.bak and that will remove the boot animation.
pukhrajsoni said:
I have tried both version, both are not working
Non OC: boot stuck up at sony logo
OC: bricked my sola, had to re-flash stock ftf :crying:
Click to expand...
Click to collapse
What rom you are using? Seems it is a rom related issue.
Divaksh said:
In next release.
What rom you are using? and never flash cm kernel over stock rom both have different-different ramdisk.
Thanks and like always nice work man.. :good:
If your device is rooted go into /system/media/
If there is a a file called bootanimation.zip you can delete or rename it to bootanimation.zip.bak and that will remove the boot animation.
What rom you are using? Seems it is a rom related issue.
Click to expand...
Click to collapse
I'm using ProjectGX 2.5.1. I reverted back to Vengeance kernel. It works. I don't know what's the problem but inside the kernel zip there are tweaks too...
any wipe?
for this and speedy CM kernel?

{U} [Kernel] [ICS | CM9] Transcendence Kernel [v 1.1.6 - July 12]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction :
This is a project I undertook to make sure that I don't waste time doing pointless things during my vacation.
The Kernel is still in its early developmental stages and I'm still learning. I'll be adding more features with time.
I request you all to report the bugs that are bound to creep in, to be a little patient and to ask intelligent questions
Kernel Features :
Based on latest source code from Sony : 6.1.1.B.1.54 / .56 / .75.
Based on Linux Kernel source code : 3.0.78.
Compiled Using Linaro 4.7
Overclocked to 1.15GHz
CWM Recovery v6.0.2.8
Reconfigured the frequency table to add more steps for increments :
Non - OC : {200MHz, 300MHz, 400MHz, 500MHz, 600MHz, 700MHz, 800MHz, 900MHz, 1000MHz}
OC : {200MHz, 400MHz, 600MHz, 800MHz, 1000MHz, 1150MHz}
Custom Bootsplash
Auto Root
Init.d Support
Preinstalled Wi-Fi Modules
Google Snappy Drivers
Support for NTFS, CIFS, ext2/3/4
zRam enabled
WiFi 5GHz band support
Governors :
Conservative
Dynamic Interactive
HotPlug
HotPlugX
IntelliDemand
Interactive
InteractiveX
Lionheart
LulzActiveQ
MinMax
Nightmare
onDemand
PegasusQ
Powersave
Performance
Sakuractive
SmarassV2
Userspace
Wheatley
I wanted to keep the kernel as minimalistic as possible. So let me know if you require any more governors, I shall gladly include them
IO Schedulers :
Noop
VR
SIO
Row
Deadline
CFQ
BFQ
Zen
Known Bugs :
None yet. Report here if you do find any
Credits :
Thanks To Sony for providing the kernel source code
Thanks To @DooMLoRD for the Auto Root & Init.d Enabler Scripts
Huge thanks To @DeepUnknown for patiently helping me sort out bugs and providing directions each time I was lost.
Special thanks to @marcellusbe, @Dharam_Maniar and @munjeni for the priceless lessons and CWM Touch v5.5.04
Thanks to @hackerpower for designing the bootsplash logo
Thanks to @GEKTHEBOSS, @umair42 and @hackerpower for testing
XDA Community as a whole for having taught me everything I know
Source Code : GitHub
Download Links : See Third Post
Instructions | Changelog
Instructions :
Either flash the downloaded zip file via CWM, or
Extract the kernel.elf from the zip file, boot the device into the bootloader and type in the Terminal/CMD :
Code:
fastboot flash boot kernel.elf
If you have flashed the kernel using fastboot, you should wipe Dalvik Cache.
Change Log
v 1.1.6 (Released)
Doubled MinMax Readahead
Intelli Memory Writeback
Network Tweaks
CPU Performance Upgrade
v 1.1.5 (Released)
Optimized Android Memory Killer. Much much much better RAM management and performance
Changed the Debug levels of Low Memory Killer
Optimized Logger to preserve more RAM
Compiled and integrated CWM 6.0.2.8 from source
ADB is now fully functional in Recovery Mode [Thanks to : @munjeni]
v 1.1.3 (Released)
Changed OC Frequency to 1.15GHz
Added Governors : HotPlugX and IntelliDemand
Bugfixes and improvements in the ramdisk to improve overall performance
v 1.1.2 (Released)
Reconfigured the frequency table and re-assigned ARM operating points :
Non - OC : {200MHz, 300MHz, 400MHz, 500MHz, 600MHz, 700MHz, 800MHz, 900MHz, 1000MHz}
OC : {200MHz, 400MHz, 600MHz, 800MHz, 1000MHz, 1100MHz, 1200MHz}
Better battery life, smoother performance
New bootsplash logo (Courtesy : @hackerpower)
v 1.1.0 (Released)
Added CWM Touch Recovery v5.5.0.4 (Thanks to @munjeni)
Added Google Snappy Drivers
Added Governors : MinMax
v 1.0.6 (Released)
Added Governors : Nightmare, Sakuractive, Wheatley
Fixed the bug that caused the LED bar to always stay on
v 1.0.5 (First Release)
Fixed the bug that caused the screen to flicker while attempting to reboot into recovery
v 1.0.4 (Unreleased)
Added custom bootsplash
Enabled zRam
v 1.0.3 (Unreleased)
Overclock up 1.2 GHz
Added Custom Governors
Added IO Schedulers
v 1.0.2 (Unreleased)
Added auto-root
Support for init.d
Support for file systems (NTFS, CIFS, ext2/3/4)
v 1.0.1 (Unreleased)
Added Wi-Fi modules
v 1.0.0 (Unreleased)
Test version
Download Links :
v 1.1.6
v 1.1.5
v 1.1.3
v 1.1.2
v 1.1.0
v 1.0.6
v 1.0.5
Ahah first!!!
Best kernel ever 4 cm9,ill test the stock
Bye
EDIT :
STock is for ics or jb?
hey man, can you please add wheatley governor? right now I'm loving it (i have cm9 + vengeance kernel)
btw nice job, if you add that governor I'll surely give this a try!
pinsicchio said:
hey man, can you please add wheatley governor? right now I'm loving it (i have cm9 + vengeance kernel)
btw nice job, if you add that governor I'll surely give this a try!
Click to expand...
Click to collapse
Alright. I'll definitely add it to the next version
Tell me if stock its for .89 or for .400
GEKTHEBOSS said:
Tell me if stock its for .89 or for .400
Click to expand...
Click to collapse
.89. I'll start working on JB once I'm convinced that the ICS version is flawless
Pwng3 said:
Alright. I'll definitely add it to the next version
Click to expand...
Click to collapse
thank you, I'll flash the new version as soon as I see the update :laugh:
This kernel is really smooth.Battery life is very good.One of the best kernel for XU
Sent from my ST25i using xda premium
Glad to see it finally see the light
best of luck my friend
DeepUnknown said:
Glad to see it finally see the light
best of luck my friend
Click to expand...
Click to collapse
Thanks a ton! It wouldn't have been possible without you! :highfive:
Would it be possible to turn off the led bar? Is pretty annoying in my opinion because it is always on, even with screen off!
Don't know if it is a bug of my device though. Wiped cache and dalvik cache.
Anyway good job mate, glad to see a new kernel for our U
Sent from my Xperia U using xda app-developers app
mirco_pa said:
Would it be possible to turn off the led bar? Is pretty annoying in my opinion because it is always on, even with screen off!
Don't know if it is a bug of my device though. Wiped cache and dalvik cache.
Anyway good job mate, glad to see a new kernel for our U
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
Are you on Stock or CM?
Pwng3 said:
Are you on Stock or CM?
Click to expand...
Click to collapse
CM
Sent from my Xperia U using xda app-developers app
Same for me...kernel working good for now but the light bar stay on..for turn off i plug and unplug the usb cable..you can modify that work how in stock rom?
mirco_pa said:
Would it be possible to turn off the led bar? Is pretty annoying in my opinion because it is always on, even with screen off!
Don't know if it is a bug of my device though. Wiped cache and dalvik cache.
Anyway good job mate, glad to see a new kernel for our U
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
ferro123 said:
Same for me...kernel working good for now but the light bar stay on..for turn off i plug and unplug the usb cable..you can modify that work how in stock rom?
Click to expand...
Click to collapse
The light is supposed to go off once you have booted into the system. Could you please try installing the Illumination Receiver along with the Illumination Bar Notification app? It has an option to turn on/off the LED bar along with extra control for notifications. In the meanwhile, I'll take a look at my source.
@GEKTHEBOSS : Did you too face the same issue on CM9?
Transcendence v 1.0.6
Changelog :
Added Governors : Nightmare, Sakuractive, Wheatley
Fixed the LED Bar bug that caused it to always stay on
Download Links :
Download Stock Kernel
Download CM Kernel
Please flash and let me know if there is something amiss. Its almost 5:00AM IST. I should really get some sleep now
Now work good for me in next release you should add anymore intermediate frequence
Thanks, waiting to test your upcoming jb version.

{Sola} [Kernel] [JB | CM10] Phantom Kernel [v 1.1.0 - June 21] {Performance}

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel Features :
Based on latest source code from Sony (6.2.A.0.400) and FXP (CM 10)
Based on Linux Kernel source code : 3.0.80
CWM v6.0.1.2
Overclock-able to 1.15GHz
Reconfigured the frequency table to add more steps for increments :
Power Saver Edition : {200MHz, 300MHz, 400MHz, 500MHz, 600MHz, 700MHz, 800MHz, 900MHz, 1000MHz}
Performance Edition : {200MHz, 400MHz, 600MHz, 800MHz, 1000MHz, 1150MHz}
Custom Bootsplash
Auto Root
Android Low Memory Killer from 3.4
Init.d Support
Preinstalled Wi-Fi Modules
LZO Compressed zImage
Enabled Google Snappy Drivers
Support for NTFS, CIFS, ext2/3/4
zRam enabled
WiFi 5GHz band support
Governors :
Conservative
Dynamic Interactive
HotPlug
HotPlugX
Intellidemand
Interactive
InteractiveX
Lionheart
LulzActiveQ
MinMax
Nightmare
onDemand
PegasusQ
Powersave
Performance
Sakuractive
SmarassV2
Userspace
Wheatley
IO Schedulers :
Noop
VR
SIO
Row
Deadline
CFQ
Zen
Known Bugs :
None yet. Report here if you do find any
Credits :
Thanks To Sony and FXP for providing the kernel source code
Thanks to @DooMLoRD for the Auto Root & Init.d Enabler Scripts
Thanks to @DeepUnknown for all the help and guidance.
Special thanks to @marcellusbe, @Dharam_Maniar and @munjeni for the priceless lessons and CWM Touch v5.5.04
Thanks to @mr.drooly for helping me with testing the kernel
Huge thanks to @hackerpower for the bootsplash images, avatar, and the signature
XDA Community as a whole for having taught me everything I know
Source Code : GitHub
Download Links : See Third Post
Instructions | Changelog
Instructions :
Either flash the downloaded zip file via CWM, or
Extract the kernel.elf from the zip file, boot the device into the bootloader and type in the Terminal/CMD :
Code:
fastboot flash boot kernel.elf
If you have flashed the kernel using fastboot, you should wipe Dalvik Cache.
Change Log
v 1.1.0 (Released)
Optimized Android Memory Killer. Much much much better RAM management and performance
Changed OC Frequency to 1.15 GHz (stable, consistent performance)
Changed the Debug levels of Low Memory Killer
Optimized Logger to preserve more RAM
Disabled KSM, decreased lag
v 1.0.8 (Released)
Disabled KSM, improved multitasking abilities
Added Governor : HotPlugX
v 1.0.7 (First Release)
Added the latest patches for LED by @munjeni
v 1.0.6 (Unreleased)
Fixed the LED bar issues caused in 1.0.5
Enabled KSM
Minor tweaks for improving the overall performance
v 1.0.5 (Unreleased)
Replaced CWM Touch Recovery with FXP Recovery (CWM v6.0.1.2) [Fixes the problems with Root Explorer/File Explorer etc.]
Changed bootsplash logo (Courtesy : @hackerpower)
Enabled Arch power
LZO Compressed zImage
Added Google Snappy Drivers
Added Governor : Intellidemand
v 1.0.4 (Unreleased)
Added custom bootsplash
Enabled zRam
v 1.0.3 (Unreleased)
Added Custom Governors
Added IO Schedulers
v 1.0.2 (Unreleased)
Added auto-root
Support for init.d
Support for file systems (NTFS, CIFS, ext2/3/4)
v 1.0.1 (Unreleased)
Fixed Camera
Fixed WiFi
v 1.0.0 (Unreleased)
Test version
Download Links
v 1.1.0
v 1.0.8
v 1.0.7
Since I do not own the device, please be patient, for I'll be counting on you guys for feedback.
I look forward to doing the little I can to make your device sexier :highfive:
Wow can't wait for this. We all need a good JB Kernel. zRAM and so many frequency oversteps, this has really got me excited!! The race is wide open . Thanks for starting this project. Good Luck .
Hey why not make a combo?
All powersave frequencies with OC?
I would like to have a combo like that!
Also add 100MHz.. very efficient at battery saving
Look forward to it
keep up the good work
LED ?
Working LED on JB ?
Yeah, make it combo so I don't have to downloaded both.
Sent from my MT27i using xda premium
dwaipayanray95 said:
Hey why not make a combo?
All powersave frequencies with OC?
I would like to have a combo like that!
Also add 100MHz.. very efficient at battery saving
Look forward to it
keep up the good work
Click to expand...
Click to collapse
johnchua said:
Yeah, make it combo so I don't have to downloaded both.
Click to expand...
Click to collapse
I wish I could do that. But its not possible to accommodate more values in the frequencies table in the Overclocked Version.
And I did not add 100MHz because it causes phone to lag and be unresponsive on most Governors.
udarasandaruwan said:
Working LED on JB ?
Click to expand...
Click to collapse
@mr.drooly was my tester. I'm hoping that there were no issues.
Looks very promising, huge list of Governors, WiFi 5Ghz band and first JB Kernel with OC @ 1.2 GHz.
Testing, Performance Edition with Interactivex+SIO (200 MHz - 1.2 GHz) Will let you know.
!
all fast, but multitasking in this kernel very bad
Desktop always redraws, I hope this is temporary.
Sent from my MT27i using xda premium
johnchua said:
Desktop always redraws, I hope this is temporary.
Sent from my MT27i using xda premium
Click to expand...
Click to collapse
It's a rom related "bug".
udarasandaruwan said:
Working LED on JB ?
Click to expand...
Click to collapse
LED working fine for me. SMS, calls no problem with led.
Eth4n said:
It's a rom related "bug".
Click to expand...
Click to collapse
Thanks. So, please correct it in the kernel next update.
Sent from my MT27i using xda premium
johnchua said:
Thanks. So, please correct it in the kernel next update.
Sent from my MT27i using xda premium
Click to expand...
Click to collapse
redraw is related to ROM, not kernel
Sent from Mayudroid
Last time I saw oc to 1.2 ghz there was a problem with the tables(vengeance kernel). Does this work normally?
Sent from my MT27i using xda premium
okay, i have 1 feedback. could you make this kernel all modes can do multitask?
itachilinux said:
redraw is related to ROM, not kernel
Sent from Mayudroid
Click to expand...
Click to collapse
Testing with skernel now, I don't think it has so much redraw problem.
I couldn't install skernel with cwm, ended by fastbooting. Please check. No any led lights when I tried to restart phone.
Sent from my MT27i using xda premium
I can't decide what version to download
I care about my battery life but I like smooth experience too...
what the people here recomend?
I use Ultimate Rom V8 (JB)
Testing for the last 20 hrs, speed is snappy overall. Multitasking (of over two apps) as pointed out isn't that great. Interactivex+SIO @ 1.2 Ghz - 200 Mhz seems the ideal for battery life which I see is better among others given the performance.
I think keyboard redraws is associated to kernel partially. I had lesser withdraws with the kernel Ashwin's Ultimate Rom. It has something to do with destroying processes which is still buggy in the port as of now.

Categories

Resources