【KERNEL】【CM10/JB】 Speedy Sola v5.5 - "The name is enough" 【CWM Touch】 【AROMA】 【1/5】 - Sony Xperia P, U, Sola, Go

【KERNEL】【CM10/JB】 Speedy Sola v5.5 - "The name is enough" 【CWM Touch】 【AROMA】 【1/5】
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel Features:
Based on Sony Latest Source Code: 6.1.1.B.1.54 / .56 / .75.
[*]Based on Linux Kernel Source Code: 3.0.75 (Latest to date).
[*]Aroma installer.
[*]SuperUser/SuperSu/Superuser(ClockworkMod) included.
[*]Compiled Using Linaro 4.8
[*]CWM touch recovery with working extra features.
[*]New Sony make.believe bootsplash.
[*]Init.d Support.
[*]Frandom support
[*]Ads free eXperience included.
[*]SmartOverclock upto 1.15 GHz.
[*]ZRAM/SWAP support.
[*]Auto Install for Wi-Fi Modules.
[*]Good Battery Life with elf.3 support.
[*]Deep sleep mode.
[*]Pre rooted.
[*]LZO Kernel Image Compression.
[*]Governors:
Dynamic Interactive
LulzactiveQ
SmartassV2
HotPlug
OndemandX
OndemandQ
Pegasusq
Adaptive
InteractiveX
Sakuractive
Lazy
Wheatley
Nightmare
MinMax
Interactive
Conservative
Ondemand
Userspace
Powersave
Performance
IO Schedulers:
noop
deadline
cfq
sio
vr
zen
NTFS Support
[*]CIFS Support
[*]Clean-Cache Support
--------------------------------------------------------------------------------------------
Credits:
Munjeni for CWM touch recovery and help.
[*]FXP for ramdisk.
[*]amarullz for aroma.
[*]Sony for the source code.
--------------------------------------------------------------------------------------------
Sources:
Github: source
--------------------------------------------------------------------------------------------
Always Remember:
Please Don't mirror my files, I like to keep track of download count.
Report Bugs with details and I will fix them as soon as possible.
If someone helps press thanks for him.
--------------------------------------------------------------------------------------------
Rules For Posting:
Don't post benchmark comparisons, It's against XDA rule.
Do not ask how to flash? Guide is there in post #3
Instead of saying thanks press the button it worths more.
Do not ask for ETA’s
--------------------------------------------------------------------------------------------
Downloads and Changelog: post #2
--------------------------------------------------------------------------------------------
Instructions, Guide and FAQ's: post #3
==================================================​If you all have a high regard for my tools, roms, kernels and feel my hardwork and time which I have poured in making these tools, roms and kernels is praiseworthy so do Rate this "awesome" thread 5 STARS and Leave plethora of THANKS..... Which I only ask in the name of donations!!!
Huge thanks to those that have already thanked!
And THANKS for constructive feedback - which makes Speedy so AMAZING!
Regards
Divaksh Jain
==================================================​
Click to expand...
Click to collapse

Download:
Speedy Kernel v5.5 : Click Here
Speedy Kernel v5.0 : 816 Downloads.
Change Log:
Code:
====================================================
[B]Speedy Kernel Change Log[/B]
====================================================
[B]Speedy Kernel v5.5 (1-05-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.75
-Linaro 4.8 Optimized
-Added Freq 600MHz in NON OC version
-CIFS, NTFS, FUSE module installation option in AROMA
-Added OTG module installation option in AROMA
-Fixed Frandom script
-Ramdisk Optimizations
-Boot time fixed
-Overall highly improved and stabilized
-Initial release for JB
[B]Speedy Kernel v5.0 (19-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.74
-Stock Version - Initial Release.
-AROMA installer (stock only)
-OC and NON OC version.
-Enabled ARCH_POWER
-Added Frandom
-5GHz band support added
-ZEN added back.
-Signal loss fixed.
-OTG fixed (not tested)
[B]Speedy Kernel v4.2 (16-04-2013)[/B]
-WiFi fixed.
-Enabled 80211 and WL12XX
[B]Speedy Kernel v4.1 (15-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.73
-Compliled using default CM configuration.
-Auto change max freq fixed(not sure)
-Improved battery life.
[B]Speedy Kernel v4.0 (14-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.71
-LINARO optimized
-Compiled Using Linaro 4.7
-Fixed OndemandQ governer
-Fixed Android OS battery drain
-Improved performance
[B]Speedy Kernel v3.0 (29-03-2013)[/B]
-Added Governers (Dynamic Interactive, Adaptive)
-Final fix for auto freq change.
-Final fix governer(Lazy, Sakuractive, OndemandX)
-Fixed OndemandX input.
-Removed Extra bytes from cmdline.
-Added Governers (Lulzactive, OndemandQ)
-Added Stability and Speed.
[B]Speedy Kernel v2.1 (27-03-2013)[/B]
-Fixed Superuser Permissions.
-Fixed OndemandX Input.
-Fixed Recovery input button for Xperia P(Now Volume UP).
-Added External SD support in Recovery Xperia Sola.
-Added Governer(Sakuractive).
[B]Speedy Kernel v2.0 (26-03-2013)[/B]
-Fixed Auto freq scaling change.
-Added CWM touch recovery.
-Added Governers(InteractiveX, LulzactiveQ, Lazy)
-Stability and Speed improved.
[B]Speedy Kernel v1.2 (23-03-2013)[/B]
-Added IO Schedulers(VR,SIO,Row,Zen)
-New Bootsplash - SONY make.believe
[B]Speedy Kernel v1.0 (22-03-2013)[/B] - My First Kernel :D
-Initial release.

How to flash Speedy Stock kernel??
Copy it to your phone's SD Card.
Flash Speedy Kernel zip via CWM.
AROMA Installer will launch and then, you can select the options you want.
Reboot and Done!!
NOTE: in case it doesn't boot see post #33
(press thanks for @pukhrajsoni)
Thanks to @dragxdk
==================================================
F.A.Q's :-
How to enter in touch recovery?
>> Press volume up button one time just after LED flashes and vibration.
Is this working on blah blah?
>> I don't know. Do some research.
[*]Why I'm unable to flash kernel.
>>Is your bootloader unlocked? Flashing kernel required a unlocked bootloader.
[*]Battery drains like hell. WTF?
>> Not kernel problem. It's your apps that are waking up device from deep sleep.
[*]Is it pre-rooted ?
>> Yes it is, It also comes with Superuser/SuperSu/SuperUser(ClockworkMod) pre-installed.
[*]Does this kernel has X or Y mod?
>> Do some research. Check thread, repo, commits etc.
[*]Which governors/IO-schedulers to use?
>> Depends on your usage. See here for more info.
[*]I lost speedy kernel after new rom installation?
>> You must have flashed new rom contains kernel, flash Speedy Kernel again.
[*]I need more info on something?
>> You can find all answers here, Google is our best friend.
==================================================
Settings to increase performance & battery life!!
System
Settings -> Developer Options -> Force GPU 2D Rendering (Get better graphics score for 2D graphics)
Settings -> Developers Options -> User Interface -> Windows Sale Animations -> 0.5x (Reduces lags if present)
Settings -> Developers Options -> Apps -> Background Process Limit -> 2 (Can use your own number... Gives you more ram other words releases ram)
---------------------------------------------------------------------------------------
Wireless & Networks
Settings -> More... -> Mobile Networks > Network Mode -> GSM only (Saves battery)
Settings -> More... -> Mobile Networks > Data Enabled -> untick (Turn on from toggle when needed, saves battery)
---------------------------------------------------------------------------------------
Device
Settings -> Sound -> Vibrate on touch -> untick (Improve performance, saves battery)
Settings -> Display -> Sleep -> 30 seconds is more than enough (Saves battery)
Settings -> Display -> Brightness -> Auto brightness on with minimum brightness (Increase when needed from slider control, saves battery)
---------------------------------------------------------------------------------------
Personal
Settings -> Accounts & Sync -> Turn off (Sync manually when needed, saves battery)
Settings -> Location Services -> Turn off (Turn on from toggle when needed, saves battery)

Thank You so much for the Kernel luved ur CM KERNEL
Hope its Of Same Quality

what is SIO, I mean when ppl talk about governers the write for example "interactivex+sio"
I put the interactivex governer and put 200-800 frequencies but what is SIO mean?
sry for the bad English.

Good job,great dev!!! :thumbup:
tapatalk

dude! big mistake! in the title of this thread it's says "stock" but in the headline (the first row) of your post is says "for cm9 roms"!
I just had to flash the stock rom and now I'm installing the all thing from the start!

lsd95 said:
what is SIO, I mean when ppl talk about governers the write for example "interactivex+sio"
I put the interactivex governer and put 200-800 frequencies but what is SIO mean?
sry for the bad English.
Click to expand...
Click to collapse
It's scheduler
Sent from my MT27i using Tapatalk 2

Boot stuck up at SONY logo :-S
Switched back to my old kernel
Sent from my MT27i using Tapatalk 2

File removed from mediafire...!!!

ashwin prabhunerurkar said:
Thank You so much for the Kernel luved ur CM KERNEL
Hope its Of Same Quality
Click to expand...
Click to collapse
My pleasure.
And its better than CM version.
dragxdk said:
Good job,great dev!!! :thumbup:
tapatalk
Click to expand...
Click to collapse
Thanks man.
lsd95 said:
dude! big mistake! in the title of this thread it's says "stock" but in the headline (the first row) of your post is says "for cm9 roms"!
I just had to flash the stock rom and now I'm installing the all thing from the start!
Click to expand...
Click to collapse
Thanks for leting me know. I forgot to edit OP.(copy paste thing)
pukhrajsoni said:
Boot stuck up at SONY logo :-S
Switched back to my old kernel
Sent from my MT27i using Tapatalk 2
Click to expand...
Click to collapse
Just tested.. It boots, works like charm.
It is for stock roms not for CM roms, hope you installed it on stock rom.
behzad.bz said:
File removed from mediafire...!!!
Click to expand...
Click to collapse
Both links updated. :victory:
Enjoy.. happy flashing.

Works good, will u add 100 and 600mhz steps too?

Flashed your kernel via AROMA Installer. My phone boots up but stuck at bootlogo. It's the same problem if I flash a CM kernel on a stock rom. Any ideas?

what is OC and NON OC ?
which one should i install?

HassanTakno said:
what is OC and NON OC ?
which one should i install?
Click to expand...
Click to collapse
OC stands for "Overclock" and NON OC stands for "Non Overclock". Ok, let's say, our device have 1GHz processor, with the OC kernel, you can make your device's processor clock at 1.15GHz.

I ve installed oc and it works perfectly!!!
tapatalk
---------- Post added at 11:27 AM ---------- Previous post was at 11:20 AM ----------
Divaksh, i need some help bro please, if i want to remove bootanimation, i must to edit build prop and change value 1/0 on the line of bootanim proprieties...??
Installation and demo of speedy kernel v.5 OC
tapatalk

not working with stock rom
I have tried both version, both are not working
Non OC: boot stuck up at sony logo
OC: bricked my sola, had to re-flash stock ftf :crying:

Eth4n said:
Works good, will u add 100 and 600mhz steps too?
Click to expand...
Click to collapse
In next release.
Vinardo_ZzZ 2000 said:
Flashed your kernel via AROMA Installer. My phone boots up but stuck at bootlogo. It's the same problem if I flash a CM kernel on a stock rom. Any ideas?
Click to expand...
Click to collapse
What rom you are using? and never flash cm kernel over stock rom both have different-different ramdisk.
dragxdk said:
I ve installed oc and it works perfectly!!!
tapatalk
---------- Post added at 11:27 AM ---------- Previous post was at 11:20 AM ----------
Divaksh, i need some help bro please, if i want to remove bootanimation, i must to edit build prop and change value 1/0 on the line of bootanim proprieties...??
Installation and demo of speedy kernel v.5 OC
tapatalk
Click to expand...
Click to collapse
Thanks and like always nice work man.. :good:
If your device is rooted go into /system/media/
If there is a a file called bootanimation.zip you can delete or rename it to bootanimation.zip.bak and that will remove the boot animation.
pukhrajsoni said:
I have tried both version, both are not working
Non OC: boot stuck up at sony logo
OC: bricked my sola, had to re-flash stock ftf :crying:
Click to expand...
Click to collapse
What rom you are using? Seems it is a rom related issue.

Divaksh said:
In next release.
What rom you are using? and never flash cm kernel over stock rom both have different-different ramdisk.
Thanks and like always nice work man.. :good:
If your device is rooted go into /system/media/
If there is a a file called bootanimation.zip you can delete or rename it to bootanimation.zip.bak and that will remove the boot animation.
What rom you are using? Seems it is a rom related issue.
Click to expand...
Click to collapse
I'm using ProjectGX 2.5.1. I reverted back to Vengeance kernel. It works. I don't know what's the problem but inside the kernel zip there are tweaks too...

any wipe?
for this and speedy CM kernel?

Related

【KERNEL】 【CM9/ICS】 Speedy Sola v5.5 - "The name is enough" 【CWM Touch】 【AROMA】【3/5】

【KERNEL】 【CM9/ICS】 Speedy Sola v5.5 - "The name is enough" 【CWM Touch】 【AROMA】【3/5】
About Kernel:
"Speedy Kernel" the name itself says all story, Speedy Kernel is always based on latest Linux source code and comes with all needed new and governors and schedulers. Speedy Kernel comes in an unique AROMA package what allows you to choose your desired root management app and the desired modules installation.
Basic concept of this tweaked kernel is to provide you possible best performance and battery life.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel Features:
Based on Sony Latest Source Code: 6.1.1.B.1.54 / .56 / .75.
[*]Based on Linux Kernel Source Code: 3.0.75 (Latest to date).
[*]Aroma installer.
[*]SuperUser/SuperSu/Superuser(ClockworkMod) included.
[*]Compiled Using Linaro 4.8
[*]CWM touch recovery with working extra features.
[*]New Sony make.believe bootsplash.
[*]Init.d Support.
[*]Frandom support
[*]Ads free eXperience included.
[*]SmartOverclock upto 1.15 GHz.
[*]ZRAM/SWAP support.
[*]Auto Install for Wi-Fi Modules.
[*]Good Battery Life with elf.3 support.
[*]Deep sleep mode.
[*]Pre rooted.
[*]LZO Kernel Image Compression.
[*]Governors:
Dynamic Interactive
LulzactiveQ
SmartassV2
HotPlug
OndemandX
OndemandQ
Pegasusq
Adaptive
InteractiveX
Sakuractive
Lazy
Wheatley
Nightmare
MinMax
Interactive
Conservative
Ondemand
Userspace
Powersave
Performance
IO Schedulers:
noop
deadline
cfq
sio
vr
zen
NTFS Support
[*]CIFS Support
[*]Clean-Cache Support
--------------------------------------------------------------------------------------------
Video:
--------------------------------------------------------------------------------------------
Credits:
Munjeni for CWM touch recovery and help.
[*]FXP for ramdisk.
[*]amarullz for aroma.
[*]Sony for the source code.
[*] @dragxdk for Videos.
--------------------------------------------------------------------------------------------
Sources:
Github: source
--------------------------------------------------------------------------------------------
Always Remember:
Please Don't mirror my files, I like to keep track of download count.
Report Bugs with details and I will fix them as soon as possible.
If someone helps press thanks for him.
--------------------------------------------------------------------------------------------
Rules For Posting:
Don't post benchmark comparisons, It's against XDA rule.
Do not ask how to flash? Guide is there in post #3
Instead of saying thanks press the button it worths more.
Do not ask for ETA’s
--------------------------------------------------------------------------------------------
Downloads and Changelog: post #2
--------------------------------------------------------------------------------------------
Instructions, Guide and FAQ's: post #3
==================================================​If you all have a high regard for my tools, roms, kernels and feel my hardwork and time which I have poured in making these tools, roms and kernels is praiseworthy so do Rate this "awesome" thread 5 STARS and Leave plethora of THANKS..... Which I only ask in the name of donations!!!
Huge thanks to those that have already thanked!
And THANKS for constructive feedback - which makes Speedy so AMAZING!
Regards
Divaksh Jain
==================================================​
Click to expand...
Click to collapse
Download Speedy Sola Kernel - "The name is enough"
Download:
Speedy Kernel v5.5 : Post #145
Speedy Kernel v5.0 : 916(Stock)+584(CM9) Downloads
Speedy Kernel v4.2 : 206 Downloads
Speedy Kernel v4.1 : 166 Downloads
Speedy Kernel v4.0 : 78 Downloads
Speedy Kernel v3.0 : 549 Downloads
Speedy Kernel v2.1 : Not released.
Speedy Kernel v2.0 : 162 Downloads
Speedy Kernel v1.2 : 183 Downloads
Speedy Kernel v1.0 : 101 Downloads
Change Log:
Code:
====================================================
Speedy Kernel Change Log
====================================================
[B]Speedy Kernel v5.5 (1-05-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.75
-Linaro 4.8 Optimized
-Added Freq 600MHz in NON OC version
-CIFS, NTFS, FUSE module installation option in AROMA
-Added OTG module installation option in AROMA
-Fixed Frandom script
-Ramdisk Optimizations
-Boot time fixed
-Overall highly improved and stabilized
-Initial release for JB
[B]Speedy Kernel v5.0 (19-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.74
-Stock Version - Initial Release.
-AROMA installer (stock only)
-OC and NON OC version.
-Enabled ARCH_POWER
-Added Frandom
-5GHz band support added
-ZEN added back.
-Signal loss fixed.
-OTG fixed (not tested)
[B]Speedy Kernel v4.2 (16-04-2013)[/B]
-WiFi fixed.
-Enabled 80211 and WL12XX
[B]Speedy Kernel v4.1 (15-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.73
-Compliled using default CM configuration.
-Auto change max freq fixed(not sure)
-Improved battery life.
[B]Speedy Kernel v4.0 (14-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.71
-LINARO optimized
-Compiled Using Linaro 4.7
-Fixed OndemandQ governer
-Fixed Android OS battery drain
-Improved performance
[B]Speedy Kernel v3.0 (29-03-2013)[/B]
-Added Governers (Dynamic Interactive, Adaptive)
-Final fix for auto freq change.
-Final fix governer(Lazy, Sakuractive, OndemandX)
-Fixed OndemandX input.
-Removed Extra bytes from cmdline.
-Added Governers (Lulzactive, OndemandQ)
-Added Stability and Speed.
[B]Speedy Kernel v2.1 (27-03-2013)[/B]
-Fixed Superuser Permissions.
-Fixed OndemandX Input.
-Fixed Recovery input button for Xperia P(Now Volume UP).
-Added External SD support in Recovery Xperia Sola.
-Added Governer(Sakuractive).
[B]Speedy Kernel v2.0 (26-03-2013)[/B]
-Fixed Auto freq scaling change.
-Added CWM touch recovery.
-Added Governers(InteractiveX, LulzactiveQ, Lazy)
-Stability and Speed improved.
[B]Speedy Kernel v1.2 (23-03-2013)[/B]
-Added IO Schedulers(VR,SIO,Row,Zen)
-New Bootsplash - SONY make.believe
[B]Speedy Kernel v1.0 (22-03-2013) - My First Kernel :D[/B]
-Initial release.
Instructions, Guide and Tips n Tricks
How to flash kernel??
Method 1:
Download fastboot package and extract it and Place boot.img to fastboot folder.
Connect device in fastboot mode.
While device is power OFF: Volume Up + USB cable connected to PC
(BLUE LED will light up)
Open Command Prompt (Shift+Right mouse button) in Fastboot Folder
Write this commend and hit enter fastboot flash boot boot.img
Done
Method 2:
Download, Install FlashTool and Drivers(can be found in drivers folder)
Connect device in fastboot mode.
While device is power OFF: Volume Up + USB cable connected to PC
(BLUE LED will light up)
Launch flashtool, click on Flash(thunder icon).
Select fastboot mode and press ok > Select kernel to flash > browse and select the boot.img > Hit enter.
Done
Method 3:
Flash the zip(You need to be on a FXP's rom)
--------------------------------------------------------------------------------------------
F.A.Q's :-
How to enter in touch recovery?
>> Press volume up button one time just after LED flashes and vibration.
Is this working on blah blah?
>> I don't know. Do some research.
[*]Why I'm unable to flash kernel.
>>Is your bootloader unlocked? Flashing kernel required a unlocked bootloader.
[*]Battery drains like hell. WTF?
>> Not kernel problem. It's your apps that are waking up device from deep sleep.
[*]Is it pre-rooted ?
>> Yes it is, FXP's rom's also comes with superuser pre-installed.
[*]Does this kernel has X or Y mod?
>> Do some research. Check thread, repo, commits etc.
[*]Which governors/IO-schedulers to use?
>> Depends on your usage. See here for more info.
[*]I lost speedy kernel after new FXP's update?
>> You must have flashed new FXP's rom without removing boot.img, flash Speedy Kernel again.
[*]I need more info on something?
>> You can find all answers here, Google is our best friend.
--------------------------------------------------------------------------------------------
Tips and Tricks :-
Network Settings:-
Mobile Network > Network Type Selection> Select 2G (saves battery)
Personal Settings:-
Personal > Display > Brightness > Turn Auto Brightness Off (set to lowest, increase from toggle when needed)
Personal > Display > Sleep > 30sec is more than enough (saves battery)
Personal > Location Services > Off (turn on from toggle when needed... saves battery)
Personal > Accounts & sync > Off (switch on when needed... saves battery)
System Settings:-
Developers Options > User Interface > Force GPU Rendering > ON (increases performance)
Developers Options > User Interface > Windows Sale Animations > 0.5x (reduces lags if present)
Developers Options > Apps > Background Process Limit > 2 (can use your own number... gives you more ram other words releases ram)
Performance > Memory Management > zRam > 18% default (compress memory for increased virtual capacity)
Performance > Memory Management > Allow purging of assests > ON (allows the freeing of more ram when needed)
These above settings will help you increase performance & battery life!!
I found this, if i'm not wrong it's a commit for gpu clock control of Mali400, it's possible to add it in the next release?
https://github.com/chris41g/LoStKernel/commit/de45493b3fe2948581f2f554dfde6ab77979c83f
Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
How to install it?? I wanna be the first tester!!
Sent from my Galaxy Nexus using xda app-developers app
Sherwinnn said:
How to install it?? I wanna be the first tester!!
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Sorry but you're not the first
Quadrant flies with 2883 pts with this kernel on Xperience V5.
Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
Eth4n said:
Sorry but you're not the first
Quadrant flies with 2883 pts with this kernel on Xperience V5.
Click to expand...
Click to collapse
How to install it?
Sent from my Galaxy Nexus using xda app-developers app
Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
Sherwinnn said:
How to install it?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Have you read the post no 2.....
Instructions are mentioned.....
Sent from my Xperia Sola using xda app-developers app
Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
@[email protected] said:
Have you read the post no 2.....
Instructions are mentioned.....
Sent from my Xperia Sola using xda app-developers app
Click to expand...
Click to collapse
Oh.... Thanks!! I seriously missed that post... Hahaha
Sent from my Galaxy Nexus using xda app-developers app
Eth4n said:
I found this, if i'm not wrong it's a commit for gpu clock control of Mali400, it's possible to add it in the next release?
https://github.com/chris41g/LoStKernel/commit/de45493b3fe2948581f2f554dfde6ab77979c83f
Click to expand...
Click to collapse
Thanks.
Will check and try to add it in next release.
Download link updated to new version.
What is new?
>>Nothing, expect new Sony make.believe boot splash.
Happy Flashing.
Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
what CPU governor and i/o scheduler did you recommends for better performance and battery life on cm9?
Sent from マユロイド via xda premium
also try to make kernel for stock based.
Dev, should I charge my battery to 100% before flashing the kernel ?
mkoev said:
Dev, should I charge my battery to 100% before flashing the kernel ?
Click to expand...
Click to collapse
100% charging not required but ensure battery has enough power to boot up or handle bootloop in case (Over 25%)
---------- Post added at 02:37 PM ---------- Previous post was at 02:33 PM ----------
itachilinux said:
what CPU governor and i/o scheduler did you recommends for better performance and battery life on cm9?
Sent from マユロイド via xda premium
Click to expand...
Click to collapse
Already in your signatures and this has been recommended by FXP himself search CM 9.1 forum.
I still have to try this kernel and looks promising to me in Rachit's Kernel battery was way better comparing to FXP Original Kernel.
Good Work Jain Sahab good to see you in real development :laugh::laugh::laugh:
Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
lalit387 said:
Already in your signatures and this has been recommended by FXP himself search CM 9.1 forum.
I still have to try this kernel and looks promising to me in Rachit's Kernel battery was way better comparing to FXP Original Kernel.
Good Work Jain Sahab good to see you in real development :laugh::laugh::laugh:
Click to expand...
Click to collapse
LEL, just want to explore more bro...
Sent from マユロイド via xda premium
Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
itachilinux said:
LEL, just want to explore more bro...
Sent from マユロイド via xda premium
Click to expand...
Click to collapse
Try exploring with using kernel and different combos of governors and io schedulers.....
And let us also know what you conclude..... :thumbup:
Sent from my Xperia Sola using xda app-developers app
Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
@[email protected] said:
Try exploring with using kernel and different combos of governors and io schedulers.....
And let us also know what you conclude..... :thumbup:
Sent from my Xperia Sola using xda app-developers app
Click to expand...
Click to collapse
ok sir, i will report it asap
Sent from マユロイド via xda premium
Flashed successfully.
Will try the Wheatley governors + sio
Hey Dev, why does no frills show only 3 schedulers ? I can only see noop, deadline and cfq.
Your PO says:
IO Schedulers:
VR
SIO
Row
Zen
Deadline
CFQ
ianjay06 said:
also try to make kernel for stock based.
Click to expand...
Click to collapse
Will try soon, need time.
lalit387 said:
Good Work Jain Sahab good to see you in real development :laugh::laugh::laugh:
Click to expand...
Click to collapse
Thank you.. <3 :*
mkoev said:
Flashed successfully.
Will try the Wheatley governors + sio
Hey Dev, why does no frills show only 3 schedulers ? I can only see noop, deadline and cfq.
Your PO says:
IO Schedulers:
VR
SIO
Row
Zen
Deadline
CFQ
Click to expand...
Click to collapse
Thanks for letting me know, I think I forgot to implement schedulers, will release update soon.
updating OP.
Re: 【KERNEL】【CM9】Speedy Kernel v1.0【22-03-2013】
Thanks DIVAKSH for making awesome Rom and kernels!!!
Sent from my Galaxy Nexus using xda app-developers app

【KERNEL】 【CM9】 Speedy U v5.0 - "The name is enough" 【CWM Touch】 【LINARO】

【KERNEL】 【CM9】 Speedy U v5.0 - "The name is enough" 【CWM Touch】 【LINARO】
Speedy Kernel for CM9 roms
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel Features:
Based on Sony Latest Source Code: 6.1.1.B.1.54 / .56 / .75.
[*]Based on Linux Kernel Source Code: 3.0.74 (Latest to date).
[*]Compiled Using Linaro 4.7
[*]CWM touch recovery with working extra features.
[*]New Sony make.believe bootsplash.
[*]Init.d Support.
[*]SmartOverclock upto 1.15 GHz.
[*]ZRAM/SWAP support.
[*]Auto Install for Wi-Fi Modules.
[*]Good Battery Life with elf.3 support.
[*]Deep sleep mode.
[*]Pre rooted.
[*]LZO Kernel Image Compression.
[*]Governors:
Dynamic Interactive
LulzactiveQ
SmartassV2
HotPlug
OndemandX
OndemandQ
Pegasusq
Adaptive
InteractiveX
Sakuractive
Lazy
Wheatley
Nightmare
MinMax
Interactive
Conservative
Ondemand
Userspace
Powersave
Performance
IO Schedulers:
noop
deadline
cfq
sio
vr
zen
NTFS Support
[*]CIFS Support
[*]Clean-Cache Support
--------------------------------------------------------------------------------------------
Credits:
Munjeni for CWM touch recovery and help.
[*]FXP for ramdisk.
[*]M4ST3R-V for logo.
[*]Sony for the source code.
--------------------------------------------------------------------------------------------
Sources:
Github: source
--------------------------------------------------------------------------------------------
Always Remember:
Please Don't mirror my files, I like to keep track of download count.
Report Bugs in this thread and I will fix them as soon as possible.
If you like my kernel please rate it and press some thanks.
--------------------------------------------------------------------------------------------
Rules For Posting:
Don't post benchmark comparisons, It's against XDA rule.
Do not ask how to flash? Guide is there in post #3
Instead of saying thanks press the button it worths more.
Do not ask for ETA’s
--------------------------------------------------------------------------------------------
Downloads and Changelog: post #2
--------------------------------------------------------------------------------------------
Instructions, Guide and FAQ's: post #3
==================================================​If you all have a high regard for my tools, roms, kernels and feel my hardwork and time which I have poured in making these tools, roms and kernels is praiseworthy so do Rate this "awesome" thread 5 STARS and Leave plethora of THANKS..... Which I only ask in the name of donations!!!
Huge thanks to those that have already thanked!
And THANKS for constructive feedback - which makes Speedy so AMAZING!
Regards
Divaksh Jain
==================================================​
Click to expand...
Click to collapse
Download Speedy U Kernel for Sony Xperia U
Download:
Speedy Kernel v5.0 : Boot.img || Flashable.zip
Speedy Kernel v4.2 : 375 Downloads
Speedy Kernel v4.1 : 565 Downloads
Speedy Kernel v4.0 : Not released.
Speedy Kernel v3.0 : 381 Downloads
Speedy Kernel v2.1 : 282 Downloads.
Speedy Kernel v2.0 : Not released.
Speedy Kernel v1.2 : 103 Downloads
Speedy Kernel v1.0 : Not released.
Change Log:
Code:
====================================================
[B]Speedy Kernel Change Log[/B]
====================================================
[B]Speedy Kernel v5.0 (19-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.74
-Stock Version - Initial Release.
-AROMA installer (stock only)
-OC and NON OC version.
-Enabled ARCH_POWER
-Added Frandom
-5GHz band support added
-ZEN added back.
-Signal loss fixed.
-OTG fixed (not tested)
[B]Speedy Kernel v4.2 (16-04-2013)[/B]
-WiFi fixed.
-Enabled 80211 and WL12XX
[B]Speedy Kernel v4.1 (15-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.73
-Compliled using default CM configuration.
-Auto change max freq fixed(not sure)
-Improved battery life.
[B]Speedy Kernel v4.0 (14-04-2013)[/B]
-Updated to latest Linux Kernel Source Code: 3.0.71
-LINARO optimized
-Compiled Using Linaro 4.7
-Fixed OndemandQ governer
-Fixed Android OS battery drain
-Improved performance
[B]Speedy Kernel v3.0 (29-03-2013)[/B]
-Added Governers (Dynamic Interactive, Adaptive)
-Final fix for auto freq change.
-Final fix governer(Lazy, Sakuractive, OndemandX)
-Fixed OndemandX input.
-Removed Extra bytes from cmdline.
-Added Governers (Lulzactive, OndemandQ)
-Added Stability and Speed.
[B]Speedy Kernel v2.1 (27-03-2013)[/B]
-Fixed Superuser Permissions.
-Fixed OndemandX Input.
-Fixed Recovery input button for Xperia P(Now Volume UP).
-Added External SD support in Recovery Xperia Sola.
-Added Governer(Sakuractive).
[B]Speedy Kernel v2.0 (26-03-2013)[/B]
-Fixed Auto freq scaling change.
-Added CWM touch recovery.
-Added Governers(InteractiveX, LulzactiveQ, Lazy)
-Stability and Speed improved.
[B]Speedy Kernel v1.2 (23-03-2013)[/B]
-Added IO Schedulers(VR,SIO,Row,Zen)
-New Bootsplash - SONY make.believe
[B]Speedy Kernel v1.0 (22-03-2013)[/B] - My First Kernel :D
-Initial release.
Instructions, Guide and Tips n Tricks
How to flash kernel??
Method 1:
Download fastboot package and extract it and Place boot.img to fastboot folder.
Connect device in fastboot mode.
While device is power OFF: Volume Up + USB cable connected to PC
(BLUE LED will light up)
Open Command Prompt (Shift+Right mouse button) in Fastboot Folder
Write this commend and hit enter fastboot flash boot boot.img
Done
Method 2:
Download, Install FlashTool and Drivers(can be found in drivers folder)
Connect device in fastboot mode.
While device is power OFF: Volume Up + USB cable connected to PC
(BLUE LED will light up)
Launch flashtool, click on Flash(thunder icon).
Select fastboot mode and press ok > Select kernel to flash > browse and select the boot.img > Hit enter.
Done
Method 3:
Flash the zip(You need to be on a FXP's rom)
--------------------------------------------------------------------------------------------
F.A.Q's :-
How to enter in touch recovery?
>> Press volume up button one time just after LED flashes and vibration.
Is this working on blah blah?
>> I don't know. Do some research.
[*]Why I'm unable to flash kernel.
>>Is your bootloader unlocked? Flashing kernel required a unlocked bootloader.
[*]Battery drains like hell. WTF?
>> Not kernel problem. It's your apps that are waking up device from deep sleep.
[*]Is it pre-rooted ?
>> Yes it is, FXP's rom's also comes with superuser pre-installed.
[*]Does this kernel has X or Y mod?
>> Do some research. Check thread, repo, commits etc.
[*]Which governors/IO-schedulers to use?
>> Depends on your usage. See here for more info.
[*]I lost speedy kernel after new FXP's update?
>> You must have flashed new FXP's rom without removing boot.img, flash Speedy Kernel again.
[*]I need more info on something?
>> You can find all answers here, Google is our best friend.
--------------------------------------------------------------------------------------------
Tips and Tricks :-
Network Settings:-
Mobile Network > Network Type Selection> Select 2G (saves battery)
Personal Settings:-
Personal > Display > Brightness > Turn Auto Brightness Off (set to lowest, increase from toggle when needed)
Personal > Display > Sleep > 30sec is more than enough (saves battery)
Personal > Location Services > Off (turn on from toggle when needed... saves battery)
Personal > Accounts & sync > Off (switch on when needed... saves battery)
System Settings:-
Developers Options > User Interface > Force GPU Rendering > ON (increases performance)
Developers Options > User Interface > Windows Sale Animations > 0.5x (reduces lags if present)
Developers Options > Apps > Background Process Limit > 2 (can use your own number... gives you more ram other words releases ram)
Performance > Memory Management > zRam > 18% default (compress memory for increased virtual capacity)
Performance > Memory Management > Allow purging of assests > ON (allows the freeing of more ram when needed)
These above settings will help you increase performance & battery life!!
Divaksh said:
[*]Method 3:
Flash the zip -coming soon
Click to expand...
Click to collapse
I know is a noob question, but flashable zip will theorically work on locked bootloaders?. Thanks in advance
R: 【KERNEL】【CM9】Speedy Kernel v1.1【24-03-2013】
blackkzero said:
I know is a noob question, but flashable zip will theorically work on locked bootloaders?. Thanks in advance
Click to expand...
Click to collapse
You cant touch kernel partition without unlocking,sorry
Will my device be overclocked the moment I install this kernel?
After flashing this,my phone doesnt even start,doesnt do nothing except volup and voldown.
Phone doesn't even get to boot screen, I'm using slim rom cm9.
zootzoot said:
Phone doesn't even get to boot screen, I'm using slim rom cm9.
Click to expand...
Click to collapse
Same here,i guess next time ill wait for feedback before using anything. Thanks for the lesson.
Re: 【KERNEL】【CM9】Speedy Kernel v1.1【24-03-2013】
xhk_sk said:
After flashing this,my phone doesnt even start,doesnt do nothing except volup and voldown.
Click to expand...
Click to collapse
zootzoot said:
Phone doesn't even get to boot screen, I'm using slim rom cm9.
Click to expand...
Click to collapse
I think something is missing, will repair it tomorrow.
I don't own device, so will need testers.
interested people add me on FB(http://fb.me/Divaksh)
Sent from my Xperia Sola using xda premium
Re: 【KERNEL】【CM9】Speedy Kernel v1.1【24-03-2013】
Divaksh said:
I think something is missing, will repair it tomorrow.
I don't own device, so will need testers.
interested people add me on FB(http://fb.me/Divaksh)
Sent from my Xperia Sola using xda premium
Click to expand...
Click to collapse
I've added you and sent you a message on Fb.
Thanks
Sent from my Xperia U using xda premium
I am ready to help though I don't have vast amt of knowledge about Android..
Link and OP updated, thanks to Mayank.
Divaksh said:
Link and OP updated, thanks to Mayank.
Click to expand...
Click to collapse
Ive been testing for around 2 hrs on this ROM [LINARO][4.0.4] SlimCM™ - built from source [XU] - Build 20130324.
No reboots and recovery works fine.
R: 【KERNEL】【CM9】Speedy Kernel v1.1【24-03-2013】
Can you add linaro?
Re: 【KERNEL】【CM9】Speedy Kernel v1.1【24-03-2013】
zootzoot said:
Ive been testing for around 2 hrs on this ROM [LINARO][4.0.4] SlimCM™ - built from source [XU] - Build 20130324.
No reboots and recovery works fine.
Click to expand...
Click to collapse
Mayank has tested it, it's working fine. I'll have to wait for more replies as I don't own device.
GEKTHEBOSS said:
Can you add linaro?
Click to expand...
Click to collapse
Bro it is Linaro optimized.
Sent from my Xperia Sola using xda premium
Divaksh said:
Mayank has tested it, it's working fine. I'll have to wait for more replies as I don't own device.
I'm testing it on Slim Rom latest version...till now all is ok playing Real Racing 3 ..very smooth
Click to expand...
Click to collapse
Can someone try version 2.1 and report me?
Thanks
Divaksh said:
Can someone try version 2.1 and report me?
Thanks
Click to expand...
Click to collapse
Will try it when I get Home (in about 1 - 1.5 hours maybe)...
Divaksh said:
Can someone try version 2.1 and report me?
Thanks
Click to expand...
Click to collapse
I'm flashin it now...I'll inform you soon
CWM works good, but there are these messages:
'e: Missing bitmap b4,b5,b6,b7,b8,a10'
and touch buttons don't work.
It boots ! do you want to know something in particular?
I noticed a huge usage of RAM: it stays on 30/50m Mb, while before I've 100/120 Mb with the same apps in background
But after ran zipalign and sqlite script, my free ram is back, sorry

【KERNEL】 【CM9】 Speedy P v5.0 - "The name is enough" 【CWM Touch】 【LINARO】

【KERNEL】 【CM9】 Speedy P v5.0 - "The name is enough" 【CWM Touch】 【LINARO】
Speedy Kernel for CM9 roms
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel Features:
Based on Sony Latest Source Code: 6.1.1.B.1.54 / .56 / .75.
[*]Based on Linux Kernel Source Code: 3.0.74 (Latest to date).
[*]Compiled Using Linaro 4.7
[*]CWM touch recovery with working extra features.
[*]New Sony make.believe bootsplash.
[*]Init.d Support.
[*]SmartOverclock upto 1.15 GHz.
[*]ZRAM/SWAP support.
[*]Auto Install for Wi-Fi Modules.
[*]Good Battery Life with elf.3 support.
[*]Deep sleep mode.
[*]Pre rooted.
[*]LZO Kernel Image Compression.
[*]Governors:
Dynamic Interactive
LulzactiveQ
SmartassV2
HotPlug
OndemandX
OndemandQ
Pegasusq
Adaptive
InteractiveX
Sakuractive
Lazy
Wheatley
Nightmare
MinMax
Interactive
Conservative
Ondemand
Userspace
Powersave
Performance
IO Schedulers:
noop
deadline
cfq
sio
vr
zen
NTFS Support
[*]CIFS Support
[*]Clean-Cache Support
--------------------------------------------------------------------------------------------
Credits:
Munjeni for CWM touch recovery and help.
[*]FXP for ramdisk.
[*]M4ST3R-V for logo.
[*]Sony for the source code.
--------------------------------------------------------------------------------------------
Sources:
Github: source
--------------------------------------------------------------------------------------------
Always Remember:
Please Don't mirror my files, I like to keep track of download count.
Report Bugs in this thread and I will fix them as soon as possible.
If you like my kernel please rate it and press some thanks.
--------------------------------------------------------------------------------------------
Rules For Posting:
Don't post benchmark comparisons, It's against XDA rule.
Do not ask how to flash? Guide is there in post #3
Instead of saying thanks press the button it worths more.
Do not ask for ETA’s
--------------------------------------------------------------------------------------------
Downloads and Changelog: post #2
--------------------------------------------------------------------------------------------
Instructions, Guide and FAQ's: post #3
==================================================​If you all have a high regard for my tools, roms, kernels and feel my hardwork and time which I have poured in making these tools, roms and kernels is praiseworthy so do Rate this "awesome" thread 5 STARS and Leave plethora of THANKS..... Which I only ask in the name of donations!!!
Huge thanks to those that have already thanked!
And THANKS for constructive feedback - which makes Speedy so AMAZING!
Regards
Divaksh Jain
==================================================​
Click to expand...
Click to collapse
Download:
Speedy Kernel v5.0 : boot.img || flashable.zip
Speedy Kernel v3.0 : 227 Downloads
Speedy Kernel v4.1 : Not released
Speedy Kernel v4.0 : Not released
Speedy Kernel v3.0 : 369 Downloads
Speedy Kernel v2.1 : 164 Downloads
Speedy Kernel v2.0 : 89 Downloads
Speedy Kernel v1.2 : Not released
Speedy Kernel v1.0 : Not released
--------------------------------------------------------------------------------------------
Change Log:
Code:
====================================================
Speedy Kernel Change Log
====================================================
Speedy Kernel v5.0
-Updated to latest Linux Kernel Source Code: 3.0.74
-Stock Version - Initial Release.
-AROMA installer (stock only)
-OC and NON OC version.
-Enabled ARCH_POWER
-Added Frandom
-5GHz band support added
-ZEN added back.
-Signal loss fixed.
-OTG fixed (not tested)
Speedy Kernel v4.2 (16-04-2013)
-WiFi fixed.
-Enabled 80211 and WL12XX
Speedy Kernel v4.1 (15-04-2013)
-Updated to latest Linux Kernel Source Code: 3.0.73
-Compliled using default CM configuration.
-Auto change max freq fixed(not sure)
-Improved battery life.
Speedy Kernel v4.0 (14-04-2013)
-Updated to latest Linux Kernel Source Code: 3.0.71
-LINARO optimized
-Compiled Using Linaro 4.7
-Fixed OndemandQ governer
-Fixed Android OS battery drain
-Improved performance
Speedy Kernel v3.0 (29-03-2013)
-Added Governers (Dynamic Interactive, Adaptive)
-Final fix for auto freq change.
-Final fix governer(Lazy, Sakuractive, OndemandX)
-Fixed OndemandX input.
-Removed Extra bytes from cmdline.
-Added Governers (Lulzactive, OndemandQ)
-Added Stability and Speed.
Speedy Kernel v2.1 (27-03-2013)
-Fixed Superuser Permissions.
-Fixed OndemandX Input.
-Fixed Recovery input button for Xperia P(Now Volume UP).
-Added External SD support in Recovery Xperia Sola.
-Added Governer(Sakuractive).
Speedy Kernel v2.0 (26-03-2013)
-Fixed Auto freq scaling change.
-Added CWM touch recovery.
-Added Governers(InteractiveX, LulzactiveQ, Lazy)
-Stability and Speed improved.
Speedy Kernel v1.2 (23-03-2013)
-Added IO Schedulers(VR,SIO,Row,Zen)
-New Bootsplash - SONY make.believe
Speedy Kernel v1.0 (22-03-2013) - My First Kernel :D
-Initial release.
How to flash kernel??
Method 1:
Download fastboot package and extract it and Place boot.img to fastboot folder.
Connect device in fastboot mode.
While device is power OFF: Volume Up + USB cable connected to PC
(BLUE LED will light up)
Open Command Prompt (Shift+Right mouse button) in Fastboot Folder
Write this commend and hit enter fastboot flash boot boot.img
Done
Method 2:
Download, Install FlashTool and Drivers(can be found in drivers folder)
Connect device in fastboot mode.
While device is power OFF: Volume Up + USB cable connected to PC
(BLUE LED will light up)
Launch flashtool, click on Flash(thunder icon).
Select fastboot mode and press ok > Select kernel to flash > browse and select the boot.img > Hit enter.
Done
Method 3:
Flash the zip(You need to be on a FXP's rom)
--------------------------------------------------------------------------------------------
F.A.Q's :-
How to enter in touch recovery?
>> Press volume up button one time just after LED flashes and vibration.
Is this working on blah blah?
>> I don't know. Do some research.
[*]Why I'm unable to flash kernel.
>>Is your bootloader unlocked? Flashing kernel required a unlocked bootloader.
[*]Battery drains like hell. WTF?
>> Not kernel problem. It's your apps that are waking up device from deep sleep.
[*]Is it pre-rooted ?
>> Yes it is, FXP's rom's also comes with superuser pre-installed.
[*]Does this kernel has X or Y mod?
>> Do some research. Check thread, repo, commits etc.
[*]Which governors/IO-schedulers to use?
>> Depends on your usage. See here for more info.
[*]I lost speedy kernel after new FXP's update?
>> You must have flashed new FXP's rom without removing boot.img, flash Speedy Kernel again.
[*]I need more info on something?
>> You can find all answers here, Google is our best friend.
--------------------------------------------------------------------------------------------
Tips and Tricks :-
Network Settings:-
Mobile Network > Network Type Selection> Select 2G (saves battery)
Personal Settings:-
Personal > Display > Brightness > Turn Auto Brightness Off (set to lowest, increase from toggle when needed)
Personal > Display > Sleep > 30sec is more than enough (saves battery)
Personal > Location Services > Off (turn on from toggle when needed... saves battery)
Personal > Accounts & sync > Off (switch on when needed... saves battery)
System Settings:-
Developers Options > User Interface > Force GPU Rendering > ON (increases performance)
Developers Options > User Interface > Windows Sale Animations > 0.5x (reduces lags if present)
Developers Options > Apps > Background Process Limit > 2 (can use your own number... gives you more ram other words releases ram)
Performance > Memory Management > zRam > 18% default (compress memory for increased virtual capacity)
Performance > Memory Management > Allow purging of assests > ON (allows the freeing of more ram when needed)
These above settings will help you increase performance & battery life!!
Reserved, Happy Flashing.
Re: 【KERNEL】【CM9】Speedy Kernel v1.2 + CWM Touch【Xperia P】【25-03-2013】
Wow
Sent from my LT22i using xda premium
can you release stock rom version
Any chance for stock roms bro
Using Sliding_XP 7.3. Gonna test it in few moments.
bilal.23 said:
Any chance for stock roms bro
Click to expand...
Click to collapse
mlm1102003 said:
can you release stock rom version
Click to expand...
Click to collapse
plz release Stock and non-overclocked version. (I know that it's not overclocked by default until it's changed by user BUT i dont know why me and many other people (read [KERNEL][STOCK/CM9] Vengeance [1.25][05/03/13] ) dont like it. just suggestions...
GOOD LUCK :good:
Re: 【KERNEL】【CM9】Speedy Kernel v1.2 + CWM Touch【Xperia P】【25-03-2013】
Downloading and under the test
I wish it will be with more battery life!
Sent from my Xperia p using xda premium
I'm either retarded, or it's not possible to enter the recovery without Rebooting into Recovery from OS. Tried tapping Vol up, Vol down, Power, Focus and Camera buttons while LED is flashing different colors, nothing happens.
How do I?
Also I noticed the touch recovery doesn't have the crazy amount of "No"s in confirmation dialogue, which I find pretty logical.
any chance of getting Sakuractive governor? not added brov....
Good work brov!
Lauri455 said:
I'm either retarded, or it's not possible to enter the recovery without Rebooting into Recovery from OS. Tried tapping Vol up, Vol down, Power, Focus and Camera buttons while LED is flashing different colors, nothing happens.
How do I?
Also I noticed the touch recovery doesn't have the crazy amount of "No"s in confirmation dialogue, which I find pretty logical.
Click to expand...
Click to collapse
I had a very same problem. By accident i have discovered that recovery is entered by pressing POWER button repeatedly just at the end of led color blinking sequence (start pressing just about violet color). But be careful to stop pressing immediatelly when phone vibrates. If power is pressed with recovery on, phone reboots immediatelly.
Re: 【KERNEL】【CM9】Speedy Kernel v1.2 + CWM Touch【Xperia P】【25-03-2013】
mlm1102003 said:
can you release stock rom version
Click to expand...
Click to collapse
bilal.23 said:
Any chance for stock roms bro
Click to expand...
Click to collapse
Coming Soon.
Lauri455 said:
I'm either retarded, or it's not possible to enter the recovery without Rebooting into Recovery from OS. Tried tapping Vol up, Vol down, Power, Focus and Camera buttons while LED is flashing different colors, nothing happens.
How do I?
Also I noticed the touch recovery doesn't have the crazy amount of "No"s in confirmation dialogue, which I find pretty logical.
Click to expand...
Click to collapse
When led blinks and phone vibrates press volume up key, you will be entered to recovery.
Its power button.
whalesplaho said:
any chance of getting Sakuractive governor? not added brov....
Good work brov!
Click to expand...
Click to collapse
Thanks.
In next release if I get enough thanks and support.
Bobo E said:
I had a very same problem. By accident i have discovered that recovery is entered by pressing POWER button repeatedly just at the end of led color blinking sequence (start pressing just about violet color). But be careful to stop pressing immediatelly when phone vibrates. If power is pressed with recovery on, phone reboots immediatelly.
Click to expand...
Click to collapse
Already answered.
Sent from my Xperia Sola using xda premium
Divaksh said:
When led blinks and phone vibrates press volume up key, you will be entered to recovery.
Click to expand...
Click to collapse
I tried once more and it is definitely not volume up, it is POWER button. Is there really a reason for enterign recovery to differ from all other kernels?
Bobo E said:
I tried once more and it is definitely not volume up, it is POWER button. Is there really a reason for enterign recovery to differ from all other kernels?
Click to expand...
Click to collapse
Yes indeed, it's the Power button that enters recovery after LED flashes and vibrations.
Experience so far:
1) Signal loss followed by huge battery drain using pegasusq governor
2) Immediate reboot when choosing lulzactiveq governor
Testing will go on ...
Bobo E said:
Experience so far:
1) Signal loss followed by huge battery drain using pegasusq governor
2) Immediate reboot when choosing lulzactiveq governor
Testing will go on ...
Click to expand...
Click to collapse
brov try Ondemand/Sio & see....
I use ondemandq/sio. Battery lift is good. don't lost wifi connection while sleep. I give 5 star for this kernel.
Just found one big PLUS of this kernel - in CWM it is able to mount internal memory (/sdcard) to PC via USB! (helpfull when you somehow damage ROM so it won't boot anymore).

{P} [Kernel] [ICS | CM9] Transcendence Kernel [v 1.1.5 - July 2] {Big Update!}

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction :
This is a project I undertook to make sure that I don't waste time doing pointless things during my vacation.
The Kernel is still in its early developmental stages and I'm still learning. I'll be adding more features with time.
I request you all to report the bugs that are bound to creep in, to be a little patient for I do not own the device
and to ask intelligent questions
Kernel Features :
Based on latest source code from Sony : 6.1.1.B.1.54 / .56 / .75.
Based on Linux Kernel source code : 3.0.78.
Compiled Using Linaro 4.7
FXP Recovery
Reconfigured the frequency table to add more steps for increments :
Power Saver Edition : {200MHz, 300MHz, 400MHz, 500MHz, 600MHz, 700MHz, 800MHz, 900MHz, 1000MHz}
Performance Edition : {200MHz, 400MHz, 600MHz, 800MHz, 1000MHz, 1150MHz}
Custom Bootsplash
Auto Root
Init.d Support
Updated Android Low Memory Killer
Preinstalled Wi-Fi Modules
Google Snappy Drivers
Support for NTFS, CIFS, ext2/3/4
zRam enabled
WiFi 5GHz band support
Governors :
Conservative
Dynamic Interactive
HotPlug
HotPlugX
IntelliDemand
Interactive
InteractiveX
Lionheart
LulzActiveQ
MinMax
Nightmare
onDemand
PegasusQ
Powersave
Performance
Sakuractive
SmarassV2
Userspace
Wheatley
I wanted to keep the kernel as minimalistic as possible. So let me know if you require any more governors, I shall gladly include them
IO Schedulers :
Noop
VR
SIO
Row
Deadline
CFQ
BFQ
Zen
Known Bugs :
None yet. Report here if you do find any
Credits :
Thanks To Sony for providing the kernel source code
Thanks To @DooMLoRD for the Auto Root & Init.d Enabler Scripts
Huge thanks To @DeepUnknown for patiently helping me sort out bugs and for the ramdisk
Special thanks to @marcellusbe, @Dharam_Maniar and @munjeni for the priceless lessons and CWM Touch v5.5.04
Thanks to @hackerpower for designing the bootsplash logo
Thanks to @aftergr for helping with the testing.
XDA Community as a whole for having taught me everything I know
Source Code : GitHub
Download Links : See Third Post
Instructions | Changelog
Instructions :
Either flash the downloaded zip file via CWM, or
Extract the kernel.elf from the zip file, boot the device into the bootloader and type in the Terminal/CMD :
Code:
fastboot flash boot kernel.elf
If you have flashed the kernel using fastboot, you should wipe Dalvik Cache.
Change Log
v 1.1.5 (Second Release)
Optimized Android Memory Killer. Much much much better RAM management and performance
Changed the Debug levels of Low Memory Killer
Optimized Logger to preserve more RAM
v 1.1.3 (First Release)
Removed KSM
Added Governors : IntelliDemand, HotPlugX
Changed OC Frequency to 1.15GHz
v 1.1.2 (Test Release)
Reconfigured the frequency table and re-assigned ARM operating points :
{200MHz, 300MHz, 400MHz, 500MHz, 600MHz, 700MHz, 800MHz, 900MHz, 1000MHz}
Better battery life, smoother performance
New bootsplash logo (Courtesy : @hackerpower)
KSM enabled
v 1.1.0 (Unreleased)
Added Google Snappy Drivers
Added Governors : MinMax
Removed OC to ensure stability
v 1.0.6 (Unreleased)
Added Governors : Nightmare, Sakuractive, Wheatley
Fixed the bug that caused the LED bar to always stay on
v 1.0.5 (Unreleased)
Fixed the bug that caused the screen to flicker while attempting to reboot into recovery
v 1.0.4 (Unreleased)
Added custom bootsplash
Enabled zRam
v 1.0.3 (Unreleased)
Overclock up 1.2 GHz
Added Custom Governors
Added IO Schedulers
v 1.0.2 (Unreleased)
Added auto-root
Support for init.d
Support for file systems (NTFS, CIFS, ext2/3/4)
v 1.0.1 (Unreleased)
Added Wi-Fi modules
v 1.0.0 (Unreleased)
Test version
Download Links
v 1.1.5
v 1.1.3
Since I do not own the device, I request people to test this and report here if at all there are any issues. Thanks
Wow awesome dude it seem another promised cm9 kernel for our device
Sent from my LT22i using xda premium
Why you removed overclock?add at least 1.15 just to check
Sent from my Galaxy Nexus using xda app-developers app
---------- Post added at 02:36 AM ---------- Previous post was at 02:26 AM ----------
your cm9 kernel soft bricked my phone and until now i cant get iti in fastboot mode
thank god i managed to shut down my phone by holding volume + and power for a long time with black screen
Will you make a JB version?
aftergr said:
cm9 kernel soft bricked my phone and until now i cant get iti in fastboot mode
Click to expand...
Click to collapse
I'm really sorry about that. Could you see the bootlogo? Did the device enter a bootloop?
hlaraujo said:
Will you make a JB version?
Click to expand...
Click to collapse
Yes I will.
Tapatalked from XU
Flashed Via CWM [Dont Work]
Flashed Via FlashTool [Dont Work]
the phone wont even boot, black screen without response.
flashed CM9 Kernel provided by FXP and everything is fine, so , its a kernel related problem.
(Xperia P, International , Carrier 'n Bootloader unlocked)
sorry for my bad english.
blaazeer said:
Flashed Via CWM [Dont Work]
Flashed Via FlashTool [Dont Work]
the phone wont even boot, black screen without response.
flashed CM9 Kernel provided by FXP and everything is fine, so , its a kernel related problem.
(Xperia P, International , Carrier 'n Bootloader unlocked)
sorry for my bad english.
Click to expand...
Click to collapse
Could you please try this version out : http://d-h.st/ZzN ?
Thanks
Pwng3 said:
I'm really sorry about that. Could you see the bootlogo? Did the device enter a bootloop?
Yes I will.
Tapatalked from XU
Click to expand...
Click to collapse
That's ok I understand
No bootloop,only vibrates and nothing happens after that,screen blank!
Make another version and I will test again
Sent from my Galaxy Nexus using xda app-developers app
aftergr said:
That's ok I understand
No bootloop,only vibrates and nothing happens after that,screen blank!
Make another version and I will test again
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Are you on stock or CM9? If on CM9, could you please test this : http://d-h.st/ZzN ?
Thanks a lot
I am in FXP CM9
Downloading and testing now
---------- Post added at 01:13 PM ---------- Previous post was at 01:07 PM ----------
Unfortunately doesnt work, same reaction with the 1st version
Could someone please test this and tell me if everything is fine?
Stock ICS Kernel
CM 9 Kernel
Thanks :good:
tested the last version for CM9
Booted fine and fast
Quadrant score: 2932( excelent)
3d rating score(antuntu 3d): 2146
off screen benchmark : 1134
The performance is very good at all UI
v 1.1.3
Changelog :
Added Support for Xperia P
Download Links
Stock Kernel - Power Saver Edition
Stock Kernel - Performance Edition {OC to 1.15GHz}
CM Kernel - Power Saver Edition
CM Kernel - Performance Edition {OC to 1.15GHz}
Thanks to @aftergr for helping with the testing
downloading and testing cm-performance
Confirmed O/C worked!!!!!
2d and 3d performance went up
Kernel remains in phone
I'm testing it but, the frequences are only to 200 and 1000 mhz
EDIT: ok works
Inviato dal mio Xperia P con Tapatalk 2
In cm9 with CPU spy, i can see that 1150 works
Pwng3 said:
v 1.1.3
Click to expand...
Click to collapse
I am using the stock performance version of this kernel for a week now. it's the best kernel I have used on my xp so far, and I have tried them all
I am running it with the stock based miui v4 and it's giving me a lagfree ui and good battery life, both much better than with the stock kernel.
Got a question about the governors in this kernel though, maybe you can help me; I'm setting up profiles in setcpu and was wondering which gov/shed to set for screen-off. In another thread I read gov with -x at the end support deepsleep, others don't? And -q at the end means it has dual-core support (can turn off one core)? Any recommendations?
Thanks for supporting our device @Pwng3! Please keep updating this fine ics kernel!

[KERNEL][Sony JB 4.3][26.04.15] Williams kernel v9.1

This is the version for Sony stock based ROM
Introduction
Hello dear developers and android hackers,
On this thread, I will share with you a project I am developing as I am learning kernel programming / hacking. This version of the williams kernel is based on Sony kernel with enhancement, mostly for battery saving.
Click to expand...
Click to collapse
Features
Based on Sony 12.1.A.1.207 kernel sources
Compiled with linaro GCC 4.9.1 toolchain, -O3
Frequency table from 384Mhz to 1944Mhz
Governors : interactive, ondemand, performance, conservative, lagfree, smartassV2, intellidemand2, intelliactive and lionheart
I/O schedulers : noop, deadline, cfq, V(R), row, sio, fifo
CPU frequency limiter lets you underclock all cores
Fast hotplug
Undervolt
Force fast charging
Changed minfree values for better multitasking and RAM management
TWRP and CWM recovery included, fota partition support
Dynamic fsync thank's to faux123
FauxSound thank's to faux123
Click to expand...
Click to collapse
Installation instructions
Code:
Use this kernel at you own risk !
I am not responsible for any damage or problem.
Flash zip via recovery
Reboot
Click to expand...
Click to collapse
Download
Recovery flashable zip :
Sony Williams kernel v9.1.zip
mirror
Kernel Source :
Github
Click to expand...
Click to collapse
Changelog
Williams kernel v9.1 : 26.04.15
Reactivate cpufreq limiter
Williams kernel v9 : 26.04.15
Fixed frequency table
Add 1944 MHz frequency step
Williams kernel v8 : 12.12.14
Set qcom mpdecision as default hotplug (No need to deactivate it anymore unless you want to use another hotplug )
Remove msm_mpdecision
Add fast hotplug
Increase 1.8GHz step frequency for better stability
Add FOTA recovery support (Volume down)
Williams kernel v7 : 03.10.14
Add FauxSound. Thank's to @faux123
Williams kernel v6 : 01.10.14
Rebased on Sony 12.1.A.207 kernel sources
Increase voltage of highest frequency for more stability
Fix some bugs introduced in version 5.1
Williams kernel v5.1 : 20.07.14
Updated ramdisk to .205
Replaced philz recovery with cwm
Williams kernel v5 : 30.05.14
Changed frequency table for more stability
Add force fast charging, thanks to @DooMLoRD for the port
Disabled cpu freq limiter since msm_mpdecision already takes care of it
Williams kernel v4 : 24.05.14
Add overclock up to 1888 Mhz
Williams kernel v3.1 : 23.05.14
Fixed antutu crashes
Williams kernel v3 : 22.05.14
Changed frequency table to 270-1728 MHz
Added dynamic fsync thank's to @faux123
Williams kernel v2.2 : 21.05.14
Changed illumination at splash screen
Fixes for compatibility with linaro GCC 4.9.1 toolchain
-O3 compiler optimizations
Use xz compression
Williams kernel v2 : 18.05.14
Add V(R), ROW, SIO and FIFO I/O schedulers. Thanks to bbedward and DooMLoRD
Add @show-p1984 's mpdecision (see faq for more information)
Add TWRP and CWM recovery. Thanks to @dssmex and @DooMLoRD
Add custom splash logo. Thanks to @DooMLoRD for his tutorial
Williams kernel v1 : 13.05.14
Initial release
Check my github to see all the changes.
Click to expand...
Click to collapse
FAQ
Q : With what ROM can I use this kernel ?
A : With any ROM based on Sony stock 4.3
Q : What features will be added to next versions ?
A : I probably don't know. If you have a feature request, please use the devdb tab for it on the top of the thread.
Q : Your kernel isn't working / My phone isn't booting anymore
A : Read this whole post once more, search for your problem in thread and report it if you haven't found a solution.
Q : Can I install this kernel on locked bootloader ?
A : No ! This kernel is only for unlocked bootloader.
Q : Does this kernel include recovery ?
A : Yes ! You can access by pressing volume button when the lights blink. Volume up to go to CWM and Volume down to go to TWRP or loads from FOTA partition if you have a kernel installed..
Q : What are mpdecision and fast hotplug ?
A : This is what manage your cpu cores and decide which core will be online. Fast hotplug is a brand new hotplug that I wrote. You can find more information there
Q : How to control fast hotplug ?
A : I modified Pimp my Z1 to be compatible with fast hotplug. You can use it without any problem on your Xperia SP to configure fast hotplug (Power Management menu) but it might have bugs with other functions (you can still try, I haven't had problems yet ).
You can find it there
Q : Where does the name come from ?
A : This kernel isn't named after someone but after a pear. We use this pear to make one of the best swiss "eau de vie" called Williamine.
Click to expand...
Click to collapse
Thanks To/Credits
Code:
* Sony for their sources and device
* @DooMLoRD
* @thewadegeek for his [URL="http://forum.xda-developers.com/showthread.php?t=1748297"]Tutorial[/URL]
* @show-p1984 for his mpdecision
* @dssmex
* bbedward
* Erasmux
* faux123
* Androguide.fr for Pimp my Z1
* The xda community for making me discover android and for answering so many of my questions
* Google for kernel sources and its search engine
* Apple for making expensive phone so that I never bought one of theirs
Please let me know per pm if there is any mistake or misspelled word in this thread. Automatic correction does a great job but since english isn't my motherthongue I'm pretty sure I made mistakes.
XDA:DevDB Information
Williams kernel - Sony, Kernel for the Sony Xperia SP
Contributors
pec0ra
Source Code: https://github.com/pec0ra/williams
Kernel Special Features:
Version Information
Status: Testing
Created 2014-05-13
Last Updated 2015-04-26
Cool!
Another kernel for stock based Rom
Will try ASAP
Thank you for so many governors
Sent from my C5303 using XDA Free mobile app
awesome... will try
Good luck with you development man!!! Hope u can make an kernel for CM11 too =D
Wanna try...
But could u make a flashable zip?
I am just a lazy guy. lol
------------
The graphic performance can be more stable.
And I/O seems to be a little slow.
Benchmark score is lower than stock about 1500 with Quadrant.
Just for some advices~
Can make a flashable zip according to this guide (2nd post)
http://forum.xda-developers.com/showthread.php?t=2699858
DjowBr said:
Good luck with you development man!!! Hope u can make an kernel for CM11 too =D
Click to expand...
Click to collapse
Thank you, this might come in the future but for now I will work on this one.
mrhnet said:
Can make a flashable zip according to this guide (2nd post)
http://forum.xda-developers.com/showthread.php?t=2699858
Click to expand...
Click to collapse
Dragonkind said:
Wanna try...
But could u make a flashable zip?
I am just a lazy guy. lol
------------
The graphic performance can be more stable.
And I/O seems to be a little slow.
Benchmark score is lower than stock about 1500 with Quadrant.
Just for some advices~
Click to expand...
Click to collapse
I can understand this laziness, I would have it too. So the OP is updated with flashable zip !
And thank for the review. Actually I/O and graphic performance haven't been changed so I wasn't expecting any improvement. Btw some IO schedulers might come soon.
gonns try this man
thanks will post my
review later
So far no problems at all and great battery life, especially when listening music(1% half an hour). Also could you import sound control in kernel ? It would be very useful. Thanks for great work
Recovery added?
Tapatalk-kal küldve az én C5303-el
recovery request
Hi boss, I am just using it kernel and it's a charm to use it, the only problem I face is there is no recovery on this kernel, I can even add, cam u plz add cwm or Philz touch recovery? Then it will be a great thing to use, eagerly waiting for us reply with recovery
Or u can assist me also toward recovery by myself
any one test this on eXistenZ?
and what about battery ???
Does your kernel support multi core control?
I played a bit with governors using Android Tuner app but seems to me that second core is offline most of the time if not all of the time.
Also when I set it online, it start to show CPU1 states time but when screen goes off CPU1 again goes offline.
Sent from my C5303 using XDA Free mobile app
I am on Existenz 3.3.0 . I just flashed in recovery, wiped cache and dalvick and then restared, and now my phone completely refuses to boot up? What can i do, please help
s0ur0v said:
Hi boss, I am just using it kernel and it's a charm to use it, the only problem I face is there is no recovery on this kernel, I can even add, cam u plz add cwm or Philz touch recovery? Then it will be a great thing to use, eagerly waiting for us reply with recovery
Or u can assist me also toward recovery by myself
Click to expand...
Click to collapse
There is a recovery version for locked bootloader which should also work on ub. You should try installing it.
freedom74 said:
Does your kernel support multi core control?
I played a bit with governors using Android Tuner app but seems to me that second core is offline most of the time of not all of the time.
Also when I set it online, it start to show CPU1 states time but when screen goes off CPU1 again goes offline.
Sent from my C5303 using XDA Free mobile app
Click to expand...
Click to collapse
Try to find a option to deactivate mp-decision. If you can't find it in Android tuner try trickster mod. Once this option is deactivated you will be in control of your cores.
Sent from my C5303 using Tapatalk
pec0ra said:
Try to find a option to deactivate mp-decision. If you can't find it in Android tuner try trickster mod. Once this option is deactivated you will be in control of your cores.
Click to expand...
Click to collapse
I think you may misunderstood me...
It's not so much about control but about CPU 2nd core is not used even when 1st core is at 100% at max frequency
and with WiFi on and Walkman playing music
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
freedom74 said:
I think you may misunderstood me...
It's not so much about control but about CPU 2nd core is not used even when 1st core is at 100% at max frequency
and with WiFi on and Walkman playing music
View attachment 2744673
Click to expand...
Click to collapse
Ah OK. That's strange. I haven't experienced that. Could you tell me what rom you use and your governor setting. If you know how to do it a dmesg could also be useful.
Sent from my C5303 using Tapatalk
pec0ra said:
Ah OK. That's strange. I haven't experienced that. Could you tell me what rom you use and your governor setting. If you know how to do it a dmesg could also be useful.
Click to expand...
Click to collapse
Stock JB .201 and default ondemand governor.
Also tried with SmartassV2 and intellidemand.
When I enable CPU1 with Android tuner it works fine according to active CPU governor
but when screen goes off CPU1 goes offline and stays offline.
Or maybe I'm just not seeing it works?
Here is dmesg output...
http://pastebin.com/SgvfmC6b
I just tried to put performance governor in action...
and when I enable it and set both cores online it works at full throttle but when screen goes off so does 2nd core
freedom74 said:
Stock JB .201 and default ondemand governor.
Also tried with SmartassV2 and intellidemand.
When I enable CPU1 with Android tuner it works fine according to active CPU governor
but when screen goes off CPU1 goes offline and stays offline.
Or maybe I'm just not seeing it works?
I just tried to put performance governor in action...
and when I enable it and set both cores online it works at full throttle but when screen goes off so does 2nd core
Click to expand...
Click to collapse
Of it's only when screen is off its actually a feature. But this will be optional in next version.
Sent from my C5303 using Tapatalk
pec0ra said:
Of it's only when screen is off its actually a feature.
Click to expand...
Click to collapse
It's OK to go offline when screen is off, that's perfectly OK but when you start using your phone it stays offline.
I tried AdvStd kernel .201 and it switches CPU1 core OK...
Also Doomlord's V10 fix2 working fine, maybe, I would dare to say too much of an CPU1 active
maybe that's why phone gets warmer when using DoomLord's kernel.

Categories

Resources