[Q] Can't get SCH-I605 back to stock - Verizon Samsung Galaxy Note II

I tried to flash my note 2 to 4.1.2 and it failed. Now I'm just trying to get it back to stock. It keeps failing on modem.bin.
I've tried...
I605_VRALJB_Restore.tar
CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW-Rev0406_low_ship_user.tar
CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW_Rev0406_low_ship_user.tar
root66_VZW_stock_system.tar
My OS is Windows 8 64 bit.
Odin message is as follows
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI605_I605VRLJB_I605VRALJB_CL414933_HWID04_HW_Rev0406_low_ship_user.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> modem.bin
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?

If I remember right you should try a different version.

I tried using my work computer (also windows 8 64 bit) and finally got the root66_VZW_stock_system.tar file to flash, but then it gets stuck in a boot loop.
What version should I be trying?
Thanks

I can get the phone to boot using root66 (http://forum.xda-developers.com/showthread.php?t=2024207) or VRALJB_rootedstockdeo.zip (from beans - http://www.androidfilehost.com/?fid=9390225151984926781), but I get no signal. My IMEI is uknown. I've been able to generate a new IMEI file with sgs3.nv.gen, but nv-items_reader_writer won't push it to my phone (http://forum.xda-developers.com/showthread.php?t=1804123).
While playing around I noticed something odd with the phone in windows explorer (image below). My internal memory and external sdcard seem fine, but the internal sdcard seems hosed. I tried creating a folder and it threw up an error. I'm guessing my partitions are all borked, but I'm not sure how to get them back to normal. Once the phone is back to normal I'm sure I can get my IMEI back in there and everything working again.
I've tried Section 1a and Section 1b from the root66 link above with no luck. I've tried a few other pit files with no luck. They hang on Get mapping for PIT in odin.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Related

[Q] No Model number in download mode+No PIT Partition

Hi
I have searched the forum and various others but still could not solve my problem. SO please bare with me for 5 mins to read the following.
I have recently updated to Wanam's latest V5.3 XXELLA but over night it rebooted and stuck in a bootloop. so what i did was recovery wipe everything including dalvik cache BUT still stuck in bootloop. SO again i went back on the pc and flash the stock official XXELLA again bootloop again. I have found out some people might need to go into recovery and wipe everything after the official flash. BUT again still stuck in bootloop.
I honest don't remember ticking repartition but now when i try to flash ANYTHING it says the following:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXELLA_I9300OXAELLA_742798_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I have gone as far as finding PIT file from previous thread try to flash it but it just stucks at this forever:
I have tried the following 3 files from http://www.droidevelopers.com/f363/11722-[download]-ops-pit-files.html
GT-I9300_mx_20120220.zip
GT-I9300_mx_20120322.zip
GT-I9300_mx_20120329.zip
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
Please anyone if could shine a light on me on where to go. now when im in download mode this is what i see:
FACTORY MODE
PRODUCT NAME:
CUSTOMER BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
SO i have no model number and no boot and not flashable and this is all i will see when i power it up
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
STILL REVIVABLE?OR IS IT COMPLETELY DEAD?!
Believe this is another case of sudden death syndrome (eMMC failure)... you'll have to return it to a samsung service centre.
Sent from my GT-I9300 using Tapatalk 2
beaver2233 said:
Believe this is another case of sudden death syndrome (eMMC failure)... you'll have to return it to a samsung service centre.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
is there nothing i can do apart from returning it to samsung? because the thing is i moved from uk to china and well if im being honest people here charge you for whatever they do. so you could say there is not such thing as warranty if you know what i mean. so i will want to fix it myself if possible.
if it is the sudden death syndrome, it is hardware failure, so no way to fix it yourself (not through software flashes etc) - someone else might need to confirm this, but seems to be the problem you're facing.
Sent from my GT-I9300 using Tapatalk 2
Custom rom + bootloop .
Its not dead looks like user or something has lost PIT partition .
As it stands it will fail warranty . Its not dead and download mode shows non stock firmware .
jje
so what do i need to do to revert it?
many thanks
hi! i would like to ask how's your phone? did you solve the problem of it? we have same situation i tried to flash different pit files but with no success. tried to flash official rom but it is still looking for pit file.
different pit files? flashing a wrong one kills the phone, there's nothing you can do.

[Q] Odin Bootloop VZW i545 after TWRP flash from goo manager

can be deleted. resolved!
daign said:
So I am stuck in Odin Bootloop into the downloading screen. I am trying to refllash the stock firmware
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The message log from odin says:
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
SCH-I545_MDK_562219_Stock_Restore.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Added!!
Odin v.3 engine (ID:15)..
File analysis..
SetupConnection..
All threads completed. (succeed 0 / failed 1)
Removed!!
Added!!
Odin v.3 engine (ID:15)..
File analysis..
SetupConnection..
Initialzation..
Erase...
Set PIT file..
DO NOT TURN OFF TARGET!!
Get PIT for mapping..
Firmware update start..
sbl1.mbn
NAND Write Start!!
sbl2.mbn
sbl3.mbn
rpm.mbn
aboot.mbn
FAIL! (Auth)
I have tried rebooting the phone into recovery and it always goes into Odin. So I've got a bricked phone until I can figure this out.
Thanks for any advice you may be able to go give!
-D
Click to expand...
Click to collapse
You cant flash a custom recovery on me7. I would read a little bit next time I think this has been posted three times today. Youll have to flash the stock me7 image to get back the stock recovery. Everytime you try to boot to recovery youll get put in download mode. You can boot normally by using the button combo for download mode and then denying it.
You also dont flash a stock restore file under bootloader you flash it under pda.
Sent from my SCH-I545 using Tapatalk 2
hexitnow said:
You cant flash a custom recovery on me7. I would read a little bit next time I think this has been posted three times today. Youll have to flash the stock me7 image to get back the stock recovery. Everytime you try to boot to recovery youll get put in download mode. You can boot normally by using the button combo for download mode and then denying it.
You also dont flash a stock restore file under bootloader you flash it under pda.
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
Thanks. Got that resolved a while ago! :good:

Samsung Galaxy S5 (SM-G900A) Can't Downgrade From 5.0 to Kitkat Through Odin

ODIN fails when trying to install stock firmware
Hey Guys,
Just joined the forum today, look forward to working with everyone here. I am new to this so please bear with me.
I have an AT&T Samsung Galaxy S5 (SM-G900A) which I had previously upgraded to 5.0 Lolipop. Since I can't seem to root my Lolipop device, I figured I would try downgrading my firmware to KitKat, rooting kitkat, then installing the prerooted lolipop (Does that make sence?)
Ive downloaded and tried versions 3.07 and 3.10 of ODIN. I installed some samsung drivers, assumed they were good since my computer recognized the device. Also made sure the S5 was in debugging mode.
Here is what I get on Odin after running it:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900AUCU1ANCE_G900AATT1ANCE_G900AUCU1ANCE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I read that if it fails, you should pull the battery out, restart your computer and/or try a different version. I have tried all of that. I am currently downloading the stock firmware from a different website to see if maybe that is the problem, but figured I would ask the experts whileit's downloading on my slow internet.
Is there anything obvious I am doing wrong? Any suggestions on how to fix this? (or how to root my AT&T S5 5.0 since that is the reason I am doing this all...)
Any help is greatly! Thanks,
Jake

Note 2 problem: Bootloop, recovery doesn't work, Odin fails

Hey Guys,
So, few months ago I had a problem with my Note 2 being very slow and freezing very frequently after it used to work very well. I decided to make a soft reset followed by a hard reset but the problem was still there. I decided then to flash a stock firmware which I used before and worked well. This time while I was flashing the firmware, the USB cable was removed and from here the coming problems appeared. I am having now a constant loop of the Samsung logo and I can not enter the recovery mode. When I try to enter the recovery mode, it just goes to the logo loop. I tried to flash a stock recovery but it failed and I got the following message:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I tried to flash it using TWRP and I got the same message. Also, when I try to flash the stock firmware, I get a fail message at sboot.img. Managed to make it bypass sboot.img but it got another fail at boot.img. Now it is stuck at this:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
I tried two Odin versions (Odin 3 .12 and 3.04). I also tried different USB cables and ports. I am not sure if this may help as well to identify my problem but when I try to charge my battery, I get it stuck at this as shown in the image:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Xcover 3 odin3 failed flash = brick

Hi!
So i downloaded firmware with SamFirm
Flashed with odin3 v3.13, see image.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Odin log:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 1375 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> Loke_Primary.bin
<ID:0/005> Loke_Recovery.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now phone only vibrates, no display.
Problem i tried to solve was stuck in samsung logo and not booting to os.
Did i broke it compeletely?
Hi first I would try to flash with old version of odin , for example odin 3.12 or 3.10 not the latest one .
If you are able to boot your phone to download mode is okay , just try another firmware for your region also use latest one !!!
If that doesn't help you try with DBT firmware which is without brand providers : ) ...
Good Luck : )
Teddy Lo said:
Hi first I would try to flash with old version of odin , for example odin 3.12 or 3.10 not the latest one .
If you are able to boot your phone to download mode is okay , just try another firmware for your region also use latest one !!!
If that doesn't help you try with DBT firmware which is without brand providers : ) ...
Good Luck : )
Click to expand...
Click to collapse
I cannot access download mode anymore
Any tips?
SakkeMO said:
I cannot access download mode anymore
Any tips?
Click to expand...
Click to collapse
Try with USB JIG it's not expensive at all : ).
https://www.ebay.com/itm/Micro-USB-...ng-Galaxy-S4-S3-S2-S-Note-3-2-1-/111378442299

Categories

Resources