Related
I just recently got my Atrix 4G, I'm new to Android. I've done a lot of research relative to custom roms, rooting, kernals. I know how to root, Im sketchy about roms and kernals. I just wanna make my phone ATT stock free. It makes it slow, and I know this device can do so much more. But I just wanna know what I should do. I don't know whether to do these roms:
1: [ics] cm9 by photon dev team. 1/16/12
2: Official cm7 for Atrix Stable Only
3:[rom] cm7-ics-mod2 [11/01/12]
4: [P-rom] Gingerblur v. 4.5
Kernals: by faux123
Gingerbread enhanced stock kernal
Cyanogen 7 enhanced stock kernal
I do not want to hard brick my new phone.
I would like to know what ROM is the best, I like the gingerblur stability but i like the ICS theme. But Cyanogen is well known for great ROM. Just a mess. What kernal would I use for these specific roms? What do you prefer?
first install android-sdk -your pc type
onto your pc include /tools and platform-tools as far as kernals some roms dont like some kernals soo for example of you download and install darkside it has fauxs 1.0 kernal soo dont change it to some strange china built stick with fauxs and you cant go wrong
Sent from my MB860 using Tapatalk
So prior to installing the software, what does that necessarily do? Relative to ROMS and Kernal files. I know I need ROM manager and Titanium backup apps with root for backup reasons and stuff.
First of all you will have to unlock the bootloader to install a recovery manager.
The noob guide will help you a lot. You need to first unlock your bootloader before you do any flashing.
Once that is done a recovery like Clockworkmod Recovery needs to be flashed, I'm pretty sure you can just do this through Rom Manager.
At this point, your options are expanded greatly. For most roms and kernels, you just need to download the rom, and drag and drop it into your internal sd card. After that you can go into recovery via Rom Manager. Once there, wipe your factory settings, cache, and dalvik cache (in advanced). Once this is done, do apply zip from sd card then choose from internal card then navigate to the rom you downloaded. Just make sure you want to do this because it will wipe everything from your phone except what is on your sd cards.
You don't need to mess around with the zip files at all when you download them. Just take the file you downloaded and get it to your sd card. The recovery will do the rest. Same goes with kernels. Just make sure that you have the right one for what rom you're on and flash it in recovery when after you are done setting up your new rom.
As far as roms go it just depends what you want. Right now its the motoblur or cm7 and just read what rom has the features you want the most.
Hopefully this helps a little, this is a basic idea of what you have to do. Flashing roms is not as hard as you think. Just be careful unlocking the bootloader. Anything else just ask away.
Well, first of all, since all the posts above have told you how to install roms and such, I won't go through that. I will say that you really don't have to download a new kernel, as most roms come with one that works just fine with them.
As far as which rom to go with, it depends on what you want.
If you want webtop and fingerprint scanner, and most the little blur apps that come with the stock phone with more mods and features go with wet dream, its a pretty nice rom
If all you want is webtop and fingerprint scanner and dont care about blur, go with a deblurred rom, I have used darkside and alien roms and they are both great, but I would say darkside has the most extra features. Aura also falls in this category.
If you want the fingerprint scanner then you can choose CM7 Weekly #4, or Neutrino Rom, which is based off of CM7 W#4, however both have some issues with wifi/bluetooth that you might want to read the forums about before flashing, and also Neutrino requires much more additional flashing for extra features, which is a good and a bad thing, good because you don't have to get any features you don't want and bad because you spend more time downloading and flashing zips.
If you don't care about webtop/fingerprint scanner/blur apps, and just want speed and stability then CM7 Ba2tf is the way to go, its completely stable and very fast as long as you follow install instructions.
As far as the CM9 roms, those aren't meant for noobs, they are in alpha testing and development so they are potentially unstable, so its best to wait for stable releases, or at the very least betas
The rom I am using now is Neutrino, and I am enjoying it alot, but you just have to go through the roms and find out about what they feature and don't feature, and of course there are plenty of other roms in the forum that I am completely ignorant about such as MIUI, so just look around and see what you like
ps when you do use someones rom, be sure to at least hit the "thanks" button at the bottom of their post. They put a lot of time and effort in it and it's always nice to get a thanks
Anthony04x said:
So prior to installing the software, what does that necessarily do? Relative to ROMS and Kernal files. I know I need ROM manager and Titanium backup apps with root for backup reasons and stuff.
Click to expand...
Click to collapse
android-sdk will allow you to use fast boot and adb and allow phone to communicate to the pc in the event it messes up and you will need fastboot and adb shell to root and unlock the bootloader
Sent from my MB860 using Tapatalk
thewarhawk said:
Well, first of all, since all the posts above have told you how to install roms and such, I won't go through that. I will say that you really don't have to download a new kernel, as most roms come with one that works just fine with them.
As far as which rom to go with, it depends on what you want.
If you want webtop and fingerprint scanner, and most the little blur apps that come with the stock phone with more mods and features go with wet dream, its a pretty nice rom
If all you want is webtop and fingerprint scanner and dont care about blur, go with a deblurred rom, I have used darkside and alien roms and they are both great, but I would say darkside has the most extra features. Aura also falls in this category.
If you want the fingerprint scanner then you can choose CM7 Weekly #4, or Neutrino Rom, which is based off of CM7 W#4, however both have some issues with wifi/bluetooth that you might want to read the forums about before flashing, and also Neutrino requires much more additional flashing for extra features, which is a good and a bad thing, good because you don't have to get any features you don't want and bad because you spend more time downloading and flashing zips.
If you don't care about webtop/fingerprint scanner/blur apps, and just want speed and stability then CM7 Ba2tf is the way to go, its completely stable and very fast as long as you follow install instructions.
As far as the CM9 roms, those aren't meant for noobs, they are in alpha testing and development so they are potentially unstable, so its best to wait for stable releases, or at the very least betas
The rom I am using now is Neutrino, and I am enjoying it alot, but you just have to go through the roms and find out about what they feature and don't feature, and of course there are plenty of other roms in the forum that I am completely ignorant about such as MIUI, so just look around and see what you like
ps when you do use someones rom, be sure to at least hit the "thanks" button at the bottom of their post. They put a lot of time and effort in it and it's always nice to get a thanks
Click to expand...
Click to collapse
As to what you said and the guy above you, do i HAVE to unlock the bootloader? Im always gonna be on ATT. Can I just root, install the needed apps and install CM7?
Anthony04x said:
As to what you said and the guy above you, do i HAVE to unlock the bootloader? Im always gonna be on ATT. Can I just root, install the needed apps and install CM7?
Click to expand...
Click to collapse
Well I believe you're confused, which is understandable.. What you're talking about is unlocking the phone by buying a code to put in so you can use any carriers sim card, you don't need to do that
to unlock the bootloader you just follow the steps in the noob guide for unlocking, that will allow you to install a custom recovery, which, yes, is required for flashing any custom roms
Yes you have to unlock the bootloader, install clockwork mod recovery and then a custom rom. there is some work here, it is all documented in the development section of this forum. As for a rom, I am currently on cm9, however for stability I would suggest cm7 by Turl and team Atrix.
unlocking your bootloader IS different than unlocking the phone to other carriers its 2 differnt things and yes
before a custom rom can be installed the bootloader has to be unlocked
(takes 5 min)
Sent from my MB860 using Tapatalk
Thank you to everyone who helped with my situation. I'm currently running jokersax cm9 special build w/ faux123 cm9 1ghz kernal and I absolutely love it.
Sent from my MB860 using XDA Premium App
I have experience with rooting HTC devices and the HP touchpad, but i am a complete samsung noob. Things seem to work completely different with recovery on the this phone. I managed to get cwm recovery on the phone by flashing the entropy kernal (http://forum.xda-developers.com/showthread.php?t=1289460); however, it also says this is for gingerbread non-aosp roms only. Does that mean the CWM will not flash an ICS rom such as ICScrewed?
I am just generally confused cause on my other devices, kernals were always flashed using CMW, not the other way around. If someone can clear this up that would be amazing. I tried searching and looking in the stickies but i still can't find the info im looking for. thanks.
ICScrewed is not an ICS rom, its just themed that way.
We do not have working ICS yet, check the sticky.
You can flash one but audio will not work.
LiLChris06 said:
ICScrewed is not an ICS rom, its just themed that way.
We do not have working ICS yet, check the sticky.
You can flash one but audio will not work.
Click to expand...
Click to collapse
o ok, thanks. thats clears that part up thanks. I'm doing this for a friend but it turned out to be much more hassle than i was expecting. So any rom suggestions? I don't like the idea of pretending to have ICS much. I'm looking for a rom that's debloated, faster, more battery life, and has some visual polish. I'm not a huge fan of the stock touchwiz look.
UnNamed and ShoStock have a few themes and are by far the most stable I know of.
Or you can check i9100 roms and port them over or grab one that already is ported.
Read the Sticky thread thats in the General Section.
Hello all,
I just got my Note today, and thought I would come on over to XDA and say hi to everyone. I have had a little experience with android, as I had an infuse for around 10 months. I already have this thing rooted, cwm recovery installed, and I am currently creating a backup with it. I just have a couple of questions:
1. Is there a way to use ROM Manager with this phone? I can't seem to find which, if any, firmware to flash. Is there a workaround?
2. ROM SUGGESTIONS. Have any of you found one that was just awesome? Gingerbread or ICS?
Thanks for all the help guys!
Download
The collective unoficial
http://forum.xda-developers.com/showthread.php?t=1640162
Or
The collective seraphim
http://forum.xda-developers.com/showthread.php?t=1602632
Or both. download both and check them out. both great roms.
and, don't use rom manager to flash anything
always reboot to recovery, and flash that way
Last I heard ROM manager was abandoned. I am using the unofficial and I love it.
Welcome to the note, it is a beast.
Unofficially NOTEd
i just flashed the ROM per this leak http://rootgalaxynote.com/galaxy-note-i717-roms/ics-rom-for-att-galaxy-note-sgh-i717-leaked/
seems to work great so far - even the s memo improved in responsiveness and definitely the app tray is much improved.
I also use quickboot - which is a soft way of getting into recovery to flash other roms rather than the button combos
Thanks for all of the suggestions so far guys! I'm loving the phone, and the community seems awesome! Right now I'm running team perfection's ics objection. It seems good and stable thus far. I'll probably flash a few others to try them out as well. Forgive me if this has been posted somewhere else, but does uotkitchen work with the note?
Sent from my SAMSUNG-SGH-I717 using XDA
Hi,
I got a second hand T-mobile Amaze 4G and since it's second hand, I don't have very accurate info regarding what the previous guy had done with it. I've been reading extensively the forums for past weeks since all this stuff was new to me and I'm better now but still have a few questions though.
What I want to achieve is to have a stable ICS ROM on my phone. If I understood correctly, as of now nightly build of Cyanogenmod and
Info regarding my phone:
A) Carrier is T-mobile.
B) Probably is S-on, I can be wrong.
C) Have no idea about it's SuperCID status.
D) It's recovery was "CWM-based Recovery v5.0.2.7" but I installed 4EXT Recovery Touch V.1.0.0.5 RC7 on it since I read most ROMs require this.
(That's all I can think off from what I read is required to know about one's phone, but if not, ask me and I'll do my best to reply)
My questions:
1- Since my phone's carrier is T-mobile, do I still have to s-off my phone if I want to install ICS on it?
2- If the previous question's answer is positive, do I have to run Juopunutbear under Ubuntu? I read unlimited.io's website and they suggested Ubuntu and removed Windows versions of Juopunutbear due to compatibility (and user trolls) but I see youtube tutorials on to do it under Windows. Is it advised to do it under Ubuntu? It's hard to download 700Mb and also work under Ubuntu for me.
3- Which ROM is better for me? I'm a game developer and just need a stable phone so I can test my game on it. I need SD card access when I mount the phone to my computer so I can easily deploy my games. I do like the stock ICS look of Cyanogenmod but apparently Revolution is more stable, right? I'm open to other alternatives, I just want a stable ROM and hopefully look of stock ICS.
4- I tried installing both of the Cyanogenmod and Revolution but after the installing them and restarting the phone, it gets stuck at htc logo. I've read that this can be due to s-on but I also read that T-mobile phones do not require those steps. So this is my main problem now.
Thank guys so much in advance.
Update
I put the the 4EXT recovery into SmartFlash mode and then flashed the Cyanogenmod again and after the install, it did not stuck at htc logo but when I unlock the phone, it freezes after 1-2 seconds and the auto restarts! :'(
This is a good thread to read through before you start flashing ROMs, since your phone is S-ON.
Make sure you enable smartflash in 4EXT
http://forum.xda-developers.com/showthread.php?t=2096563
tube517 said:
This is a good thread to read through before you start flashing ROMs, since your phone is S-ON.
Make sure you enable smartflash in 4EXT
http://forum.xda-developers.com/showthread.php?t=2096563
Click to expand...
Click to collapse
Thanks for the reply. What's I believe is missing from that topic is that you need to upgrade the firmware. I think that's why my phone gets frozen after 1-2 seconds, amsearching for the firmware I have to upgrade.
Another question to my initial ones:
5- If I upgrade my firmware, will I be able to install GB ROMs again on it? Or do I have to downgrade my firmware in order to do so?
did you wipe completely before flashing the ROM? Wipe cache, dalvik cache and wipe data?
tube517 said:
did you wipe completely before flashing the ROM? Wipe cache, dalvik cache and wipe data?
Click to expand...
Click to collapse
Yes, I run the Super Wipe script, "Super_Wipe_Amaze_4G.zip", so it does all that. I strongly believe my problem is that I didn't install the stock ICS ROM before installing Cyanogenmod and am downloading the latest one.
So I have two questions:
1) When I upgrade my firmware to ICS, how am I will be able to install GB ROMs again? Do I have to install older firmwares first?
2) Which ICS ROM has stock lookingness of ICS but with most features and stability?
Thanks.
Cm10 is a jellybean rom and wont work until your phone is already running ics. If youre on gb, install a stock tmobile ics ruu and then flash cm10. For stock look and performance id recommend the energy rom.
Also someone correct me if im wrong but youll have to soff to go back to gb
Success!
Yes the problem WAS that I had to flash stock ICS RUU first then flash any ICS custom ROM over it. I now have a nice CryogenMod 10 on my device. It's not complete but I really love how it looks! Thanks to it's great devs.
It's not that stable and I see
And it lacks SD card drive mount which I used a lot, maybe I try to use AirDroid instead. Have to try it for a few days.
Hassaan.W said:
Cm10 is a jellybean rom and wont work until your phone is already running ics. If youre on gb, install a stock tmobile ics ruu and then flash cm10. For stock look and performance id recommend the energy rom.
Also someone correct me if im wrong but youll have to soff to go back to gb
Click to expand...
Click to collapse
Thanks Hassan, what I meant by stock is not the sense look, I don't like it. What I meant is original ICS look that Nexus 7 has for example. The look that CryogenMod has. What I was asking is that is there any other ROM which looks like CryogenMod but is more stable and has more features?
And is there any comparison chart between current state of ICS ROMs? Which ones are good for daily usage?
And I still have my questions:
1) What should I do if I want to get back to GingerBreak ROMs? Should I have to install/flash GB RUU and then a custom GB ROM over it?
2) My WiFi signal is worse, like half of what is used to be, since I'm sitting next to my router, so do I have to run/flash anything to fix this?
And let me thank EXT4 Recovery's SmartFlash, I didn't need to s-off my device, which is tricky, needs Ubuntu to work fine, etc.
test84 said:
Success!
Yes the problem WAS that I had to flash stock ICS RUU first then flash any ICS custom ROM over it. I now have a nice CryogenMod 10 on my device. It's not complete but I really love how it looks! Thanks to it's great devs.
It's not that stable and I see
And it lacks SD card drive mount which I used a lot, maybe I try to use AirDroid instead. Have to try it for a few days.
Thanks Hassan, what I meant by stock is not the sense look, I don't like it. What I meant is original ICS look that Nexus 7 has for example. The look that CryogenMod has. What I was asking is that is there any other ROM which looks like CryogenMod but is more stable and has more features?
And is there any comparison chart between current state of ICS ROMs? Which ones are good for daily usage?
And I still have my questions:
1) What should I do if I want to get back to GingerBreak ROMs? Should I have to install/flash GB RUU and then a custom GB ROM over it?
2) My WiFi signal is worse, like half of what is used to be, since I'm sitting next to my router, so do I have to run/flash anything to fix this?
And let me thank EXT4 Recovery's SmartFlash, I didn't need to s-off my device, which is tricky, needs Ubuntu to work fine, etc.
Click to expand...
Click to collapse
I dont think were allowed to compare roms here. But for the look you like with features, there are several options. One is fourth bar infusion by craigtut. Another is the one im using which is jellybam. A personal favourite rom is the dark glass 0.3 pacman by josegaire. These are tge roms with a nexus look.. the wifi signal must have something to do with the rom. Try a different one and see if it improves.
Sent from my Amaze 4G using xda app-developers app
---------- Post added at 10:02 AM ---------- Previous post was at 10:00 AM ----------
Also to go back to gingerbread you will have to S- off your device first.
Sent from my Amaze 4G using xda app-developers app
test84 said:
Success!
Yes the problem WAS that I had to flash stock ICS RUU first then flash any ICS custom ROM over it. I now have a nice CryogenMod 10 on my device. It's not complete but I really love how it looks! Thanks to it's great devs.
It's not that stable and I see
And it lacks SD card drive mount which I used a lot, maybe I try to use AirDroid instead. Have to try it for a few days.
Thanks Hassan, what I meant by stock is not the sense look, I don't like it. What I meant is original ICS look that Nexus 7 has for example. The look that CryogenMod has. What I was asking is that is there any other ROM which looks like CryogenMod but is more stable and has more features?
And is there any comparison chart between current state of ICS ROMs? Which ones are good for daily usage?
And I still have my questions:
1) What should I do if I want to get back to GingerBreak ROMs? Should I have to install/flash GB RUU and then a custom GB ROM over it?
2) My WiFi signal is worse, like half of what is used to be, since I'm sitting next to my router, so do I have to run/flash anything to fix this?
And let me thank EXT4 Recovery's SmartFlash, I didn't need to s-off my device, which is tricky, needs Ubuntu to work fine, etc.
Click to expand...
Click to collapse
if your looking for stable roms which are fully functional with a good battery life and ICS stock looking i'd recommend Android Revolution HD 3.0.1 | ICS | High Quality & Performance | Best STOCK ROM or |Aug 6th| Energy™ -.¸¸.·´¯ ICS 4.0.3 Tweaks / Beats / Blue ¯´·.¸¸. - other roms are great aswell these are stock base so yea fully functional!! :good:
ravike14 said:
if your looking for stable roms which are fully functional with a good battery life and ICS stock looking i'd recommend Android Revolution HD 3.0.1 | ICS | High Quality & Performance | Best STOCK ROM or |Aug 6th| Energy™ -.¸¸.·´¯ ICS 4.0.3 Tweaks / Beats / Blue ¯´·.¸¸. - other roms are great aswell these are stock base so yea fully functional!! :good:
Click to expand...
Click to collapse
Thanks but both of them have the sense look but CyanogenMod has the Nexus look that I'm after but is not mature as the other two that you mentioned.
I also would appreciate if someone would answer my two questions I asked previously.
test84 said:
Thanks but both of them have the sense look but CyanogenMod has the Nexus look that I'm after but is not mature as the other two that you mentioned.
I also would appreciate if someone would answer my two questions I asked previously.
Click to expand...
Click to collapse
well it's your choice and for the downgrade part thats the procedure just flash a GB ROM but never seen a post who downgrade their firmware version you can try if you want it wont hurt you..but if you want to go to stock flash the ics ruu it'll do the same thing and the wifi issue i'd say try flashing the [25.MAR.13] T-Mobile OTA 2.14.531.30 [STOCK] and then flash cyanogenMod if the problem still exist ask from the Cyanogen users whether is it a problem with the rom itself
test84 said:
Thanks but both of them have the sense look but CyanogenMod has the Nexus look that I'm after but is not mature as the other two that you mentioned.
Click to expand...
Click to collapse
Since you are looking for a "Nexus look" the fourth bar ROM by craigtut aims for that.
ravike14 said:
well it's your choice and for the downgrade part thats the procedure just flash a GB ROM but never seen a post who downgrade their firmware version you can try if you want it wont hurt you..but if you want to go to stock flash the ics ruu it'll do the same thing and the wifi issue i'd say try flashing the [25.MAR.13] T-Mobile OTA 2.14.531.30 [STOCK] and then flash cyanogenMod if the problem still exist ask from the Cyanogen users whether is it a problem with the rom itself
Click to expand...
Click to collapse
I actually did the very same thing, flashed the latest RUU which is 2.14.531.30 [STOCK] and then CM10 on it.
tube517 said:
Since you are looking for a "Nexus look" the fourth bar ROM by craigtut aims for that.
Click to expand...
Click to collapse
Thanks. I think the only ROMs that have the Nexus look are CM and FourthBar, right? Is FourthBar more stable for daily use than CM10? I love CM but sudden lags and occasional bugs is irritating.
The fourth bar has no issues at all. There used to be an older version of it called fourth bar nexus that was even more stable with better battery life but i think it has been taken down. Fourth bar infusion is a great daily driver though.
Sent from my HTC Ruby using xda app-developers app
I'd suggest s-off then super cid then tmobile ics.. Telus is a Canadian carrier known for being major a##holes..
Running tmobile on my Canadian (wind mobile) amaze required Soff
Sig:
What do you mean I can't say that??!!.. It's the fkin Internet!
test84 said:
I actually did the very same thing, flashed the latest RUU which is 2.14.531.30 [STOCK] and then CM10 on it.
Click to expand...
Click to collapse
why dont you just flash a stable ICS rom and flash a go launcher theme which looks like nexus?? solves all the problems right
Hassaan.W said:
The fourth bar has no issues at all. There used to be an older version of it called fourth bar nexus that was even more stable with better battery life but i think it has been taken down. Fourth bar infusion is a great daily driver though.
Sent from my HTC Ruby using xda app-developers app
Click to expand...
Click to collapse
Can you compare it to CM10? What are advantages and disadvantages between the two.
kazzxtrismus said:
I'd suggest s-off then super cid then tmobile ics.. Telus is a Canadian carrier known for being major a##holes..
Running tmobile on my Canadian (wind mobile) amaze required Soff
Sig:
What do you mean I can't say that??!!.. It's the fkin Internet!
Click to expand...
Click to collapse
My phone's carrier IS T-mobile! So ... ?
ravike14 said:
why dont you just flash a stable ICS rom and flash a go launcher theme which looks like nexus?? solves all the problems right
Click to expand...
Click to collapse
I don't know what you meant by "stable ICS rom" but the latest ICS that T-mobile released has Sense UI but I want Nexus UI.
Your phone carrier is tmobile.. But.. The phone was not made for tmobile.. It was made for telus..
Telus would luck up a cockroach if they could derive a profit from even 1 customer.
You need super cid.. So you need to Soff first.
Then you can flash anything in the future
I've seen a big difference in problems between those who do Soff and those who don't.. I watch closely since I did my Soff.. It's worth it.
Sig:
What do you mean I can't say that??!!.. It's the fkin Internet!
I flashed this "RUBY_ICS_35_S_TMOUS_2.14.531.3_R2_Radio_1.14.550L. 17DC_30.78.550L.15_release_262141_signed.zip" (and then CM10 over it) so I think it's a T-mobile ROM, right?
test84 said:
I flashed this "RUBY_ICS_35_S_TMOUS_2.14.531.3_R2_Radio_1.14.550L. 17DC_30.78.550L.15_release_262141_signed.zip" (and then CM10 over it) so I think it's a T-mobile ROM, right?
Click to expand...
Click to collapse
By stable Rom I meant something like arhd or energy Rom or that infusion or something like that Rom (I didn't use it reason I can't remember tje name) then get a nexus ui theme from playstore....thing kazz said was since your s on you mite face weird issues when flashing roms and its good to be s off...
I'm looking to update from Android 4.0.4. My SGH i777 is rooted from last year.
I have the clockwork mod recovery installed from last year. Using AOKP I think.
There's ROM's for 4.3 but I don't see any kernels posted here. Can someone point me in the right direction? Apparently the sg2 has left the limelight for a while now.
Once I get the kernel updated, does anyone have any good ROMs to recommend?
Thanks
ps You guys are an awesome community.
Which rom is a personal matter. You should try them yourself to see what you like. If you want Samsung Touchwiz based firmware, the latest version will be 4.1.2. To get 4.2.2 or 4.3, you will have to go with one of the AOSP based roms.
Since you have a custom kernel with CWM Recovery, just pick the firmware you want to try and flash it in recovery. You don't need to install another kernel first.
Wait, so all I have to do is pick another ROM? That's it? No firmware update?
vex390 said:
Wait, so all I have to do is pick another ROM? That's it? No firmware update?
Click to expand...
Click to collapse
firmware update? no. Whether 4.0.4 or 2.3.whatever, you already have have root/cwm; all that's left is a some recommended housecleaning*, then flash whatever ROM you want.
*either:
rom-cleaning-script
or:
factory reset
+format system
Mind = blown. Thanks so much guys!
In my experience with custom ROMs, I found that ShoStock3 v4.0 and UCMD8 v2.2 COOKED give the best battery life and stability, but I use the stock kernel for ShoStock and AJK v4.9 for UCMD8 COOKED. CM/PA/AOKP have given me subpar results in terms of stability and, most importantly (for me anyway), battery life. This is not to say that those other ROMs are bad, but for me, those haven't been working out. Your mileage may vary. Just my $0.02.
vex390 said:
I'm looking to update from Android 4.0.4. My SGH i777 is rooted from last year.
I have the clockwork mod recovery installed from last year. Using AOKP I think.
There's ROM's for 4.3 but I don't see any kernels posted here. Can someone point me in the right direction? Apparently the sg2 has left the limelight for a while now.
Once I get the kernel updated, does anyone have any good ROMs to recommend?
Thanks
ps You guys are an awesome community.
Click to expand...
Click to collapse
So you're looking for a rom. The rom you use will all depend on the type of software you like. If you like touchwiz, I recommend Shostock 3 4.0 or the Cooked Rom. If you're looking for a AOKP Android 4.2.2 rom, then I would use the Resurrection Remix rom, but remember, all roms differ on every phone. Not everyone gets the same results. I wouldn't use a 4.3 rom because its fairly new and pretty unstable on some phones, but if you really want to, I got the best results on the Carbon rom, but the battery life wasn't so good. Also, a lot of the 4.2 and 4.3 roms require you to flash gapps, which are the google apps for you phone. If you're looking for kernels, the usually come with the rom you download, so you don't really need to get a kernel. If you really want the extra customization and tweaks, there are some kernels out there, including AJK, Jeboo, and STI, that you can flash. I personally use AJK on a lot of my roms because I found it to be the most sucessful. I am running Shostock 3 with jeboo kernal right now. Shostock 3 has good performance, stability, and battery life and is touchwiz. So yeah, keep all this in mind when flashing a kernal. You don't to connect your phone to the computer or anything to flash a kernel. If you're rooted, you just have to have the rom in your phone storage or SD card and go into clockworkmod recovery and flash. Hope this helps and good luck on finding a rom that's right for you!