Disclaimer
Code:
#include
/*
* Your warranty is now void.
*
* The developers of Team-Blockbuster are not responsible for data loss,
* dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed., you accept this risk.
*/
Introduction
This kernel is for the htc one m7ul, m7att, m7vzw and m7tmo with a aosp 4.4.x based installed rom like cyanogenmod, aokp, miui and so on. But be sure your ROM is in sync with cm.
sourcecode? follow the link --> https://github.com/pinpong/android_kernel_htc_m7
Click to expand...
Click to collapse
Features
• build with latest linaro toolchain •
• linux backport & upstream patches •
• stripped modules •
• init.d support •
• any kernel updater •
• optimisation flags •
• noop/deadline/row/cfq/fiops/sio scheduler •
• uhid support •
• cifs support •
• ntfs r/w support •
• full otg support •
• force fastcharge •
• lz4 compression/decompression Extremely Fast Compression algorithm •
• kernel based thermal control •
• userspace voltage control •
• available cpu frequencies: 81MHz - 1998MHz •
• gpu overclocking •
Click to expand...
Click to collapse
Installation instructions
* Download latest thoravukk-kernel.zip
* Copy thoravukk-kernel.zip to your SDCard
* Boot into Recovery
* Flash thoravukk-kernel.zip
* Reboot and enjoy
Click to expand...
Click to collapse
Changelog
changelog
Click to expand...
Click to collapse
Downloads
Downloads
thoravukk-kernel
Sources
Github
Click to expand...
Click to collapse
FAQ
Q. My device rebooted or crashed, how can I help?
A: Get me /proc/last_kmsg and logcat.
Q. Do I need to wipe anything when flashing this kernel?
A: No.
Q: What is the best cpu/gpu oc/uv settings?
A: Use what you think is the best for you but think of your hardware.
Q. For wich Roms i can use this Kernel?
A: Raed the description.
Click to expand...
Click to collapse
Social network sites
Facebook
Google+
team-blockbuster.com
Click to expand...
Click to collapse
Thanks to
flar2
flyhalf205
faux123
fluxi
franciscofranco
DooMLoRD
tbalden
n3ocort3x
codeworkx
intervigil
crpalmer
h8rift
Click to expand...
Click to collapse
XDA:DevDB Information
[KERNEL][M7_UL, ATT, TMO, VZW][AOSP][Thoravukk] LZ4•CIFS•OC/UC/UV•THERMAL•LINARO, a Kernel for the HTC One
Contributors
pinpong
Kernel Special Features:
Version Information
Status: Stable
Created 2013-08-04
Last Updated 2013-12-02
Helpful links
FAQ:
Q. My device rebooted or crashed, how can I help?
A: Get me /proc/last_kmsg and logcat.
Q. Do I need to wipe anything when flashing this kernel?
A: No.
Q: What is the best cpu/gpu oc/uv settings?
A: Use what you think is the best for you.
Q: You have huge battery drain?
A: It will improve after some time.
Q. For wich Roms i can use this Kernel?
A: Raed the description.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
........................
Helpfull links
[REF][TWEAKS] Kernel Governors, Modules, I/O Schedulers, CPU Tweaks, AIO App Configs
[GUIDE][ADB]Easiest How to use adb, logcat, etc for noobs and newbies
[GUIDE] ADB Workshop and Guide for everyone
Click to expand...
Click to collapse
Click to expand...
Click to collapse
.....
Thanks
you don't like oc or is it in coming?
For what? You have a quadcore device running at 1.7GHz.
Sent from my One using xda premium
4x 2.0 seems to work better for me.
Sure but for what exactly you need it?
I have a OC patch too and i have try it.
With it i cant feel different.
Sent from my One using xda premium
can you mail me the patch or is it in a different kernel?
Revert
Sent from my One using xda premium
your kernel is very good but without oc i have little stucks on launcher
????
Works very smooth for me.
I dont think it have to do with no overclocking.
Sent from my One using xda premium
altensalz said:
your kernel is very good but without oc i have little stucks on launcher
Click to expand...
Click to collapse
Certainly nothing to do with overclocking
Come on, dude. It's already more powerful than you need in the real-life apps.
about this OC discussion... no launcher in the world needs 4x 2GHz to run smooth (as no app needs it). Its hotplugging what causes this stutters because mpdecison is simply adjusted that way, to run with less cores as possible.....
try it out... switch off mpdecision.. but u will notice that the cores arent unplugged as they should and tada... the ui is buttery smooth even with a hardcore live wallpaper... even on 702MHZ max... why ? simple.. because the cores arent offline. bad thing on this... deepsleep is then half of the time used as it would use it with mpdecision on.
What this phone needs is a properly handling of hotplugging... nothing else... (if u ask me, 1,7 GHZ are way to much) I run the phone the whole time on 1350MHZ max and everything is smooth with interactive governor as PowerHAL kicks in with this governor....
@pinpong
i was busy with school last 2 weeks but havent forgot about the thing u sent me.. will report asap
dont think anyone needs more than 1.7 Ghz really. its just for stats and benchmarks.
flashing now!
Keep those updates coming!!
cifs modules?
i can't seem to find the cifs modules. flashed your kernel primarily because of cifs support
I know. This should fix in v1.08.
Sent from my One using xda premium
new version for latest cm builds with cifs as module.
altensalz said:
your kernel is very good but without oc i have little stucks on launcher
Click to expand...
Click to collapse
ill second this notion. In a perfect world, 1.7 is plenty of processor for the launcher but with the current state of CM 10.1, the 2g OC really helps smooth out the micro stutters in the launcher. Everything else on the phone is smooth and snappy but the launcher lags a bit on the stock CM kernel for me.
Related
Disclaimer
Code:
/*
* You may void your warranty.
* I am not responsible for bricked devices or dead SD cards.
* Please do some research if you have any concerns about this kernel.
* YOU are choosing to make these modifications to your device.
* I absolutely disclaim all the responsibilities.
[COLOR="Red"] * Flashing kernel requires unlocked bootloader.
[/COLOR] * You can unlock your bootloader from [URL="http://unlockbootloader.sonymobile.com/"][COLOR="Blue"][U]here[/U][/COLOR][/URL].
*/
Frankly, I don't like fancy or bloated OP's. So I kept thread simple and clean. Changelogs are not posted here. Check link in description. FYI, this kernel is comaptible with CM9/Stock ICS based ROMs.
All the best!
Click to expand...
Click to collapse
Features :-
Code:
* Based on Latest Official sources
* LINARO 4.8 Optimized
* Removed debugging s**ts
* Added Frandom
* O2 Optimizations
* Salvaged RAM
* Integrated CWM
* ARM_THUMBEE Support
* CIFS, NTFS , FUSE as external Modules
* CleanCache
* ZRAM/SWAP support
* init.d support
* Google Snappy Drivers
* Ext 2/3/4 Support
* Integrated WiFi modules
* adb server is persistent
* usb debugging enabled
* rootfs and /system mounted as rw
* Other tweaks and patches
* ro.secure=0 : Root exploit enabled via adb
* Governors : Smartass2
OndemandX
Performance
Ondemand
Interactive
Powersave
Conservative
MinMax
Hotplug
Pegasusq
Wheatley
OndemandQ
InteractiveX
* IO Shedulers : sio
deadline
noop
cfq
VR
row
zen
* [COLOR="Red"]See change log or commits for detailed info.[/COLOR]
[/B]
Code:
[COLOR="Purple"]Root Binary[/COLOR] : ( Flashable via recovery )
* SuperSU : [URL="http://download.chainfire.eu/204/SuperSU/"][COLOR="Red"][U]Download[/U][/COLOR][/URL]
* Superuser : [URL="http://androidsu.com/superuser/"][COLOR="Red"][U]Download[/U][/COLOR][/URL]
Code:
[COLOR="Purple"]Instructions[/COLOR] :
* Flash the boot partition with the kernel in fastboot mode.
* Guide : [URL="http://forum.xda-developers.com/showthread.php?t=1879982"][COLOR="Blue"][U]Here[/U][/COLOR][/URL]
Credits :
Doomlord : for his init.d script
@nthr@xNine9 : for testing
Github : Source
Click to expand...
Click to collapse
F.A.Q's :-
1. Is this working on blah blah?
> I don't know. Do some research. Keep the disclaimer in mind.
2. OMG! My device rebooted/crashed/exploded?
> Get me the logcat. Check for any conflicting scripts in init.d
3. Battery drains like hell. WTF?
> Not kernel problem. It's your apps that are waking up device from deep sleep. Check the wakelocks. I don't build kernels to worsen battery life. See here for more info.
4. Signal is dropping since I flashed the kernel?
> Again. Not the kernel problem. Check if you have latest ( and proper ) baseband for your device.
5. Is it pre-rooted ?
> Autoroot isn't included. Just download flash-able zip from site. Users may prefer supersu/superuser.
6. App FC's or something crashes?
> Try reinstalling app again. Give me logcat if problem persists.
7. Does this kernel has X or Y mod?
> Do some research. Check thread, repo, commits etc.
8. Which governors/IO-schedulers to use?
> Depends on your usage. See here for more info.
9. I need more info on something?
> You can find all answers here
Changelog and Downloads
Code:
[CENTER]CODENAME OF XPERIA SOLA: [COLOR="Red"]PEPPER[/COLOR][/CENTER]
Code:
[CENTER]CODENAME OF XPERIA U: [COLOR="Red"]KUMQUAT[/COLOR][/CENTER]
Code:
[center]
[U][URL="http://www.mediafire.com/?r29d2lqkgut52"][COLOR="BROWN"]Download Kernel[/URL][/U][/COLOR][/center]
Code:
[CENTER][URL="https://github.com/rachit-rc96/Vengeance-Kernel-U8500/blob/master/Changelog.txt"][COLOR="RED"]Changelog[/URL][/COLOR][/U][/CENTER]
Cleaned the thread.
Please don't post benchmark comparisons. It's against XDA rule. I wont answer to any benchmark related queries.
Every development is unique.
Thanks! All the best!
sd card still not working the same error as last time that sd card safe to remove
everything else fine
really gud kernel infact best kernel available for sola:victory::good:
want to try :laugh::good:
notification still said "SDcard safely to remove"...
Rachit Rawat said:
Please don't post benchmark comparisons.
Click to expand...
Click to collapse
Then explain me, why the phone working slower with OC up to 1,3ghz with yours kernel than on the other kernel without OC. Apps, processes are the same.
And what is "SmartOverclock"?
Thanks a lot for your hard work and Sorry for my noobish questions.
Re: [KERNEL][ICS] Vengeance [1.22][27/02/13]
Links updated . Hopefully, sd card should work now.
xperia sola work 1.3 ghz ?
alivanov79 said:
Then explain me, why the phone working slower with OC up to 1,3ghz with yours kernel than on the other kernel without OC. Apps, processes are the same.
And what is "SmartOverclock"?
Thanks a lot for your hard work and Sorry for my noobish questions.
Click to expand...
Click to collapse
What is the matter with u y u so obsessed with benchmark and for ur knowledge benchmark are not 100% right
and i have checked the performance the gaming and apps speed is much much faster
try urself and thank the maker for his efforts
Rachit the problem has been fixed thank u so mch
ashwin prabhunerurkar said:
What is the matter with u y u so obsessed with benchmark and for ur knowledge benchmark are not 100% right
and i have checked the performance the gaming and apps speed is much much faster
try urself and thank the maker for his efforts
Rachit the problem has been fixed thank u so mch
Click to expand...
Click to collapse
Is it stable at 1.3 gigahertz? Not heating up too much?
overclocking to 1.3 ghz nice! Hope to see gpu overclocking too
ChongWiz said:
Is it stable at 1.3 gigahertz? Not heating up too much?
Click to expand...
Click to collapse
no heating for me till now and battery drain less than i expected all in all very nyc effort:laugh:
Re: [KERNEL][ICS] Vengeance [1.22][27/02/13]
Changelog links fixed.
can someone mirror the download link?i dont have mediapro account.,
thanks
jzpokz said:
can someone mirror the download link?i dont have mediapro account.,
thanks
Click to expand...
Click to collapse
I dont think an account is needed for download.....
@[email protected] said:
I dont think an account is needed for download.....
Click to expand...
Click to collapse
my fault.,DL done.,
thanks btw
i now use 1.3 ghz .and play nfsmw cpu cold
Flashed the kernel, but windows just doesn't recognize my device now... Any tricks?
/EDIT: Solved, had to disable USB debugging. By far the best kernel for Sola. THX!
please, make this kernel with touch recovery or add mounting sd\sd_ext in that
thanks
Disclaimer:
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app failed. Please do some
* research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
I made that kernel for myself,but decided to share it:maybe someone finds it useful.
Short list of features(not full,I could forgot something):
Latest source code
Patched to version 3.0.101(credits to munjeni)
Compiled with GCC 4.8.2 toolchain(self builded)
Various optimisation flags(-mtune=cortex-a9 -mfpu=vfpv3 -mfloat-abi=hard)
Huge amount of CFS patches(improved load balancing)
Memory unaligned access
ARM RWSEM optimized algorithm
Asynchronous I/O disk usage algorithm
Auto-Root
CWM Touch Recovery
Init.d support
BusyBox
ZRAM(with LZ4 compression)/ZCACHE/UKSM/CleanCache
SLUB memory allocator
Overclockable to 1.2 GHz(stable only with performance governor(for now))
Dynamic FSync Control
Exclusive Bionic libc(improved memory acces efficiency)
Adaptive readahead
RCU boost enabled
Power Saving tuned
...list will be updated,when i remember more added features
Changelog
5.3->5.5
Stabilized overclock @1.2GHz(but be aware-phone is heating very much now(in OC mode))
Dynamic & async fsync(faux123)
RWsem & mutex patches
Several changes for ext4 and mmc subsystem
Added parameter extra_free_kbytes(by default 4096)
Switched to GCC 4.9.0
Frequencies by default:200MHz-1,2GHz
About overclock: For now overclocked frequency stable only with performance governor,in other cases reboots are possible(This information actual till version 5.5). This overclock-real, not just digits in "current frequency" field. Original overclock technology made by cocafe,I am just ported his LiveOPP to our device(only core functionality).
Also, exclusive libc integrated into kernel(I was compiled it from sources and changed string routines to more optimized for armv7).
I want to say thanks to all people with public github repos:there are very little amount of my code in that kernel,most of patches I was picked up from public sources.
Download v5.3:http://d-h.st/fFg
Download v5.5:http://d-h.st/mdr
XDA:DevDB Information
Owl, Kernel for the Sony Xperia Sola
Contributors
B.B.N.
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 5.5
Created 2014-06-02
Last Updated 2014-07-06
The WiFi kernel module should remain as kernel-separate module?
I am noticed a little bug:
- WiFi is activated with random MAC addresses. I have set up MAC filtering on my router, and when trying to connect, my router kicks me
Optimizing libc is a good idea. Works great!
CM Version or Stock Version ?????
v5.5 please..
I can't download it from 4pda.ru:laugh:
maverickperfect said:
I am noticed a little bug:
- WiFi is activated with random MAC addresses.
Click to expand...
Click to collapse
I shall look for solution,thanks for bug report. But I am can't develop too often, When I have time i will continue.
does anyone have this kernel ?
maverickperfect said:
I am noticed a little bug:
- WiFi is activated with random MAC addresses. I have set up MAC filtering on my router, and when trying to connect, my router kicks me
Optimizing libc is a good idea. Works great!
Click to expand...
Click to collapse
I remember this issue with MAC in ICS. Maybe it is the same?
Have a look here:
http://forum.xda-developers.com/xpe...ria-sola-ics-rom-6-1-1-b-1-10-t1922029/page47
akkufix said:
I remember this issue with MAC in ICS. Maybe it is the same?
Have a look here:
http://forum.xda-developers.com/xpe...ria-sola-ics-rom-6-1-1-b-1-10-t1922029/page47
Click to expand...
Click to collapse
hey can u share the link for this kernel
ak.akshay said:
hey can u share the link for this kernel
Click to expand...
Click to collapse
I'm a long time away from Sola, but you should have a look here.
You have to register there. For browser use Chrome to translate
Info and thread:
http://4pda.ru/forum/index.php?act=search&source=all&forums[]=all&query=Owl+Kernel+&x=23&y=11
Well, for you i hosted them. If anyone have concerns, i will remove them.
V5.5
Owl_CWM_5.5(3.0.101).zip - 8.18 MB
V5.7
Owl_CWM_5.7_partially_replicated.zip - 8.54 MB
All credits to the OP @B.B.N. :good:
akkufix said:
I'm a long time away from Sola, but you should have a look here.
You have to register there. For browser use Chrome to translate
Info and thread:
http://4pda.ru/forum/index.php?act=search&source=all&forums[]=all&query=Owl+Kernel+&x=23&y=11
Well, for you i hosted them. If anyone have concerns, i will remove them.
V5.5
Owl_CWM_5.5(3.0.101).zip - 8.18 MB
V5.7
Owl_CWM_5.7_partially_replicated.zip - 8.54 MB
All credits to the OP @B.B.N. :good:
Click to expand...
Click to collapse
thanx I tried ON That Site But FIles Were Deleted
ak.akshay said:
thanx I tried ON That Site But FIles Were Deleted
Click to expand...
Click to collapse
You have to be registered to see them files on 4pda.
akkufix said:
You have to be registered to see them files on 4pda.
Click to expand...
Click to collapse
tried the kernel antutu gave me 17000+ score but kernel is laggy
ak.akshay said:
tried the kernel antutu gave me 17000+ score but kernel is laggy
Click to expand...
Click to collapse
17000+ for Sola, but laggy?
Can't say anything about this Kernel, maybe this comes from device's less RAM and/or LMK is to aggressive?
So everything must be reloaded before running? Try to make LowMemoryKiller "softer".
Play with governors - check with i.e. NoFrills.
akkufix said:
17000+ for Sola, but laggy?
Can't say anything about this Kernel, maybe this comes from device's less RAM and/or LMK is to aggressive?
So everything must be reloaded before running? Try to make LowMemoryKiller "softer".
Play with governors - check with i.e. NoFrills.
Click to expand...
Click to collapse
look Here 17905
ak.akshay said:
look Here 17905
Click to expand...
Click to collapse
Well...we were all happy at the time, as we reached the 10K with P, Go and Sola.
We started with 6K
Code:
[FONT="Times New Roman"][COLOR="Blue"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, dead cats,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and no point
* in pointing the finger at me for messing up your device
*/[/COLOR][/FONT]
This kernel is compiled from official xiaomi source for redmi 2 (ido-l-oss) and much thanks to @premaca for fixing the source code to our device.
Features:
Built using Google 4.8 toolchains
OC CPU 200-1.4Ghz
OC GPU 100-465Mhz
I/O Schedulers: cfq, deadline, fiops, noop, row, sio, sioplus, tripndroid, zen
CPU Governors: barry_allen, bioshock, blu_active, darkness, despair, hyper, impulse, intelliactive, intellidemand, interactive, lionfish, ondemand, pegasusq, performance, powersave
CPU Hotplug: Zen Decision, MPDecision, IntelliPlug, MSM Hotplug, Mako Hotplug, Bricked Hotplug, Alucard Hotplug, Auto SMP, MSM Sleeper
Double Tap2Wake
KCAL
fsync on-off
Advance TCP Congestion
Qualcomm thermal replaced with Intelli Thermal
LZ4-compressed kernel
Frandom Drivers
Kernel Power Suspend
Disabled updating idle time if cpu offline
Included More ZRAM Devices
More more more...
Instalation steps:
Download the link
Place on your storage
Going to your recovery
Backup you current kernel first
Then, Install the file zip (without wiping anything)
Reboot
You're done
Update changelog L and MM kernel:
F2FS now support
Removed Intelli Thermal
Removed Intellidemand
Download Link:
Kernel Folder: https://www.androidfilehost.com/?w=files&flid=109722
[12-09-2016] For CM12.1 Based Roms: https://www.androidfilehost.com/?fid=24588232905725142
[12-09-2016] For CM13 Based Roms: https://www.androidfilehost.com/?fid=24686680535467946
Dev note:
Bug like music crash on CM13 still on progress to fix. maybe will take a longer time for this and i hope i can solved this one
If you take CM12 Based kernel, you faced camera bug and probably audio bug if you using this kernel. You can use CM12 based rom with uptodate source to solved this problem quickly.
Credits:
Xiaomi
premaca
ketut kumajaya
DoomLoRd
Santhosh
savoca
AudioGod
NeoBuddy
Fransisco Franco
XDA:DevDB Information
Octopus Kernel, Kernel for the Xiaomi Redmi 2
Contributors
ocoot
Source Code: https://github.com/ocoot/octopus-kernel
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2016-09-10
Created 2016-09-10
Last Updated 2016-09-11
Superb finally we can enjoy many hot plug
Thank you so much Dev
xda-x-man said:
Superb finally we can enjoy many hot plug
Thank you so much Dev
Click to expand...
Click to collapse
need a review from user who already using this kernel
ocoot said:
need a review from user who already using this kernel
Click to expand...
Click to collapse
Okay, I flashed this kernel on mokee latest stable version
I must say kernel has lots of tweaks and features.
In term of performance wise it's great and fluent animations.
Well we have so many governors and hotplugs.
Mokee with stock was lagging but with octopus kernel working without a single lag.
Multitasking also smooth.
One word for this kernel it's ...mind blowing
Thank you dev
@ocoot I've flashed it over CM13 nightly and it works very nice. It has many things that can be tweaked and it performs great. I simply love it.
The only issue I've found is that the headset controls are not working. This seems to be a common issue to all the kernels based on official source. Jerrica and Berserk-Jerrica also have this issue. Maybe someone can look into it? CM based kernels have headset controls working fine BTW.
Many thanks for this kernel!
proudh0n said:
[MENTION=4618394]
The only issue I've found is that the headset controls are not working
Click to expand...
Click to collapse
I have apple earpods and all working
WestFring said:
I have apple earpods and all working
Click to expand...
Click to collapse
I have the Xiaomi Piston 3 and with this kernel the volume controls do not work. With stock CM13 kernel they do. Also, the music cannot be played with any music player or file manager. This issue is also present on Jerrica. My model is 2014811 1GB, if that helps.
I'll provide logs as soon as possible
@ocoot Here is the logcat about the music playback and volume controls issue. I think i'll tag also @premaca because as I said this happens also on Jerrica for me. I hope i didn't bother you by tagging both of you on this response.
For more details:
ROM: CM 13.0-20160908-NIGHTLY-wt88047
Kernel: 3.10.49-octopus-g6a3da7c
SELinux: permissive
I didn't touch any kernel configurations and I don't use any audio mod. I've tried playing music with stock CM13 player, Shuttle+ and the file manager Solid Explorer. All of them try to play the song and it gives an error.
Many thanks for your contribution!
so far so good, this kernel should be available when cn14 released for our device
thermal control is not working properly,errors in the records hotplagov-1 core at the maximum frequency, the rest sleep
What about F2FS suport?
Nice to see more and more kernels.
Will try and report for sure, Greetz.
Music crashed
ocoot said:
need a review from user who already using this kernel
Click to expand...
Click to collapse
Have tried a few kernel before this , all of them crashed my music app .. Mybe its my phone , but i dont think so .. Using cyanogenmod official nightlies ..
DenHafiz69 said:
Have tried a few kernel before this , all of them crashed my music app .. Mybe its my phone , but i dont think so .. Using cyanogenmod official nightlies ..
Click to expand...
Click to collapse
It's the kernel based on official sources, the kernels based on kumajaya's source have no issue with music playback on CM13. I have the same problem
proudh0n said:
@ocoot Here is the logcat about the music playback and volume controls issue. I think i'll tag also @premaca because as I said this happens also on Jerrica for me. I hope i didn't bother you by tagging both of you on this response.
For more details:
ROM: CM 13.0-20160908-NIGHTLY-wt88047
Kernel: 3.10.49-octopus-g6a3da7c
SELinux: permissive
I didn't touch any kernel configurations and I don't use any audio mod. I've tried playing music with stock CM13 player, Shuttle+ and the file manager Solid Explorer. All of them try to play the song and it gives an error.
Many thanks for your contribution!
Click to expand...
Click to collapse
i'll check it later. thankyou
zieruchan said:
so far so good, this kernel should be available when cn14 released for our device
Click to expand...
Click to collapse
thankyou :good:
olegst said:
thermal control is not working properly,errors in the records hotplagov-1 core at the maximum frequency, the rest sleep
Click to expand...
Click to collapse
i would to revert the intelli thermal later. this is may cause the problem
boris_k said:
What about F2FS suport?
Click to expand...
Click to collapse
will added soon!
DenHafiz69 said:
Have tried a few kernel before this , all of them crashed my music app .. Mybe its my phone , but i dont think so .. Using cyanogenmod official nightlies ..
Click to expand...
Click to collapse
proudh0n said:
It's the kernel based on official sources, the kernels based on kumajaya's source have no issue with music playback on CM13. I have the same problem
Click to expand...
Click to collapse
thankyou, i'll check it later. i hope can find the problem of this
ocoot said:
will added soon!
thankyou, i'll check it later. i hope can find the problem of this
Click to expand...
Click to collapse
Plss Increase the incall volume it is two low when compared to CM Stock kernel.
Sometimes when the device reboot, CPU stuck at lowest frequency and need to reboot again to fix.
when exiting sleep all the nuclei fixed at the maximum frequency.any hotplage.
This happens with any change frequency settings, or govornona hotplaga
P.S. after switching off locations all earned.very good core
you plan to update security patches?
OPTIMUS KERNEL
Hi guys, this is Optimus kernel for Potter. Only necessary features will be added.
This is for Nougat only. Works on Lineage/AOSP Roms. Enjoy!
Code:
Disclaimer:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
do some research if you have any concerns about features included in this KERNEL
before flashing it! YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.
FEATURES:
- Updated to latest Motorola & CAF Sources
- Updated to latest upstream (3.18.60) from kernel.org
- Built with custom tailored GCC-5.4.1 toolchain (cortex-a53 neon-vfpv4 hard-float targeted, build with latest Crosstool-NG)
- Makefile: gcc optimizations (03 & VFP hardfloat support)
- Added Fingerprint boost driver
- Added zen,fiops & sio I/O schedulers
- Added Fsync ON/OFF Control
- Added wakelock blocker support
- display: added simple api to query ON/OFF state
- Interactive: reduced timer with screen off
- KCAL control driver
- Added Sound Control driver
- Enabled power efficient workqueues by default
- Added Wake Gestures support
- KGSL & Devfreq patches
- msm: added sysfs node for vibration control
- Disabled CRC check: 30% Performance boost
- Merged upstream ARM,crypto changes
- Updates to zram,zsmalloc,irq etc
- Sched & Cpufreq Tweaks
- Removed some debug and logging options
- Enabled Advanced TCP Congestions
- Lineage Profiles compatibility
- Many more (check github)
How to Flash:
1. Download the kernel and place it into your phone storage
2. Reboot into recovery
3. Install the kernel
4. (optional) Wipe Dalvik/ART Cache and Cache partitions
5. Reboot and enjoy!
You need ROM's default kernel before flashing this as this kernel uses Anykernel2 by @osm0sis (huge thanks to him). Make sure you have it otherwise clean flash the kernel with the rom to avoid any issues.(At least dirty flash rom+kernel)
DOWNLOAD:
GDRIVE
Special thanks to:
vache
flar2
franciscofranco
frap29
GtrCraft
fAiyaZ
The Legacy Team
XDA:DevDB Information
Optimus Kernel, Kernel for the Moto G5 Plus
Contributors
Flashhhh
Source Code: https://github.com/desaishivam26/Optimus_Potter/commits/n7.1
Kernel Special Features:
Version Information
Status: Beta
Created 2017-05-29
Last Updated 2017-07-12
I am still working on the kernel. So if u encounter any bugs pls report with logs.
Little info about Optimus Governor:
Optimus governor is based on conservative governor. It sets the CPU frequencies depending on the current usage.
It differs in behaviour in that it gracefully increases and decreases the CPU speed rather than jumping to max speed
the moment there is any load on the CPU. It tries to stay on minimum frequency as much as possible reducing power
consumption. I have added a tunable OPTIMAL_THRESHOLD. When the load reaches optimal threshold the cpu frequency
increases to preset optimal_freq. You can adjust these parameters using a kernel tweaker app. It also makes use of simple
display state API to query panel ON/OFF operations reducing power consumption during screen off
I recommend using EX kernel Manager or Kernel Adiutor for tweaking kernel parameters if u want to.
Yo will there. Be support for the stock rom?
Are you the same Flashhhh who used to build for Moto G 1st?
@Flashhhh nice job mate!
Amazing ?
Thug level: beyond calculation.
Sarthak Narang said:
Thug level: beyond calculation.
Click to expand...
Click to collapse
I second that.
zeft64 said:
Yo will there. Be support for the stock rom?
Click to expand...
Click to collapse
Maybe. I need testers for stock rom
navaneethkom said:
Are you the same Flashhhh who used to build for Moto G 1st?
Click to expand...
Click to collapse
Yup
I am ready to test for stock rom sir.
You got another stock tester right here
Flashhhh said:
Maybe. I need testers for stock rom
Yup
Click to expand...
Click to collapse
I'll do it!
zeft64 said:
I'll do it!
Click to expand...
Click to collapse
You should try the kernel on stock. I don't see a reason why it shouldn't work. Just backup your stock boot.img. If anything goes wrong u can always restore stock boot.img
Flashhhh said:
You should try the kernel on stock. I don't see a reason why it shouldn't work. Just backup your stock boot.img. If anything goes wrong u can always restore stock boot.img
Click to expand...
Click to collapse
Pause. That's a trap. I've. Tried that before with other kernels. It never works lol
zeft64 said:
Pause. That's a trap. I've. Tried that before with other kernels. It never works lol
Click to expand...
Click to collapse
We are using anykernel method. It doesn't replace boot.img so it should work. Just give it a try. But remember to backup stock boot.img
Flashhhh said:
We are using anykernel method. It doesn't replace boot.img so it should work. Just give it a try. But remember to backup stock boot.img
Click to expand...
Click to collapse
The kernel I'm talking about used the any kernel method as well. I'm talking about extended kernel. Didn't work until I flashed the one the dev made for stock
zeft64 said:
The kernel I'm talking about used the any kernel method as well. I'm talking about extended kernel. Didn't work until I flashed the one the dev made for stock
Click to expand...
Click to collapse
Ok . That wasn't the case for my previous device Osprey. The kernel worked on both custom and stock. I think I'll have to make a separate zip for stock then
Flashhhh said:
Ok . That wasn't the case for my previous device Osprey. The kernel worked on both custom and stock. I think I'll have to make a separate zip for stock then
Click to expand...
Click to collapse
Can you please include Faux sound , headset high performance mode also .?
Thanks for such an awesome work , I'll try your one on stock too to see if it works .
Ohhh yeahhh Flashhhh is here too. I'm in love potter support <3 ...
Man, I tried the kernel, and it is smooth. But with optimus, interactive, conservative, ondemand governors, the frequence goes to high clock (2.0ghz) and it stuck there for hude time, even without using all power, then it goes to Min (0.6ghz) and stuck there for hude time too, even when it is necessary to use high clocks.
aki_007 said:
Can you please include Faux sound , headset high performance mode also .?
Thanks for such an awesome work , I'll try your one on stock too to see if it works .
Click to expand...
Click to collapse
Did it work?
/*
* Your warranty is... Still valid??.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WON'T WORK ON STOCK BASED ROM
Introduction:
The main objective of the kernel is to give to any user, a stock kernel with some tweaks like new CPU govenor focused on battery, performance and both of them, I/O scheduler, ...
Click to expand...
Click to collapse
Features:
Updated to lastest Motorola source
Kernel upstreamed to lastest source (3.18.63)
Lionfish, Bioshock, Zzmoove, PegasusQ CPU governors
FIOPS, ZEN I/O scheduler
Fingerprint boost driver
CRC check disabled (Performance boosted)
Vibration control
Sound control
Fsync support
Safetynet patch
Makefile: -0fast and Graphite optimizations
All feature of the boulzordev's kernel
Many other tweaks (check gitlab)
Click to expand...
Click to collapse
Download
Androidfilehost: https://www.androidfilehost.com/?w=files&flid=198747
Click to expand...
Click to collapse
How to flash:
1. Download Alize for Potter
2. Reboot to recovery
3. Flash kernel's zip
4. Reboot and tweak with proper app (Kernel auditor, Ex kernel manager, ...)
Click to expand...
Click to collapse
XDA:DevDB Information
Alize, Kernel for the Moto G5 Plus
Contributors
Martichou, Boulzordev, Flar2, Vache, fAiyaz, Nick
Source Code: https://gitlab.com/alize_kernel/Potter
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 1.0.7
Created 2017-07-20
Last Updated 2017-07-20
Changelog:
Code:
v2.0
- Everything has been redone from scratch
- Switch to Gitlab and setting up CI
- Remove Barry-Allen (too old)
- Added ZEN I/O governor
- Upstream to 3.18.63
- Check Gitlab for more
v1.8
- PegasusQ cpu governor
- Kcal control
- Hight priority workqueue
- Some build fix
v1.7 | Public release
- Lastest source
- Barry-Allen, Lionfish, ... cpu governor
- FIOPS I/O scheduler
- CRC check disabled
- Spectrum support
- Many more on github
Good work! I'm liking the extra gov options. Performance is great with the default profile at the moment. I believe it's barryallen.
dpryor88 said:
Good work! I'm liking the extra gov options. Performance is great with the default profile at the moment. I believe it's barryallen.
Click to expand...
Click to collapse
Yes, default CPU governor is set to Barry-Allen.
Glad you like the kernel.
New build is up!
Check changelog.
Getting error, finger print hardware not available. Also there are 4 fingerprints saved and I can't delete them. Running smooth other than that
Edit,
Not sure what happened but I can't edit fingerprints anymore, I've even re flashed my old backup and kernel and tried re flashing the rom,
Before I flashed this kernel I took off locks, backed upand the flashed kernel. Not sure what's going on
joshk89 said:
Getting error, finger print hardware not available. Also there are 4 fingerprints saved and I can't delete them. Running smooth other than that
Edit,
Not sure what happened but I can't edit fingerprints anymore, I've even re flashed my old backup and kernel and tried re flashing the rom,
Before I flashed this kernel I took off locks, backed upand the flashed kernel. Not sure what's going on
Click to expand...
Click to collapse
My fingerprint works perfectly, not a kernel issue
GtrCraft said:
My fingerprint works perfectly, not a kernel issue
Click to expand...
Click to collapse
Yeah I don't know what happened but nothing could undo the issue other than a clean install. Which sucks lol cause I have to redo everything and my backup is useless
joshk89 said:
Getting error, finger print hardware not available. Also there are 4 fingerprints saved and I can't delete them. Running smooth other than that
Edit,
Not sure what happened but I can't edit fingerprints anymore, I've even re flashed my old backup and kernel and tried re flashing the rom,
Before I flashed this kernel I took off locks, backed upand the flashed kernel. Not sure what's going on
Click to expand...
Click to collapse
I'm sorry for this.
But it's not a kernel issue.
No one have this issue. Good luck to restore your data
I've been running 1.7 / 1.8 for a few days now using Lionfish governor and i have to say it's pretty awesome. :good:
New build is up!
Check changelog.
Martichou said:
New build is up!
Check changelog.
Click to expand...
Click to collapse
Hey bro there's some interesting features on this kernel. Figured I'd share the link with you https://forum.xda-developers.com/oneplus-5/development/render-kernel-oos-n-eas-r1-t3639839
the download link for this kernel is down. can someone provide a mirror, please?
I don't see any extra cpu governors.
What should i do??
Akshatk said:
I don't see any extra cpu governors.
What should i do??
Click to expand...
Click to collapse
Use the v44 at this thrend:
https://forum.xda-developers.com/showthread.php?p=74525704
matze779 said:
Use the v44 at this thrend:
https://forum.xda-developers.com/showthread.php?p=74525704
Click to expand...
Click to collapse
Not there.
Here is a mirrorlink:
https://www.dropbox.com/sh/xr3qe15mjqee6ps/AACOfo2SLn30rYllGC8krvx-a?dl=0
Closed per OP request