There isn't any location detail being captured while taking photo, any setting I need to do to enable it?
Appreciate if anyone here can advise me, thanks in advance.
yes, you need to enable geotagging for the location to work. you can find it in the camera's submenu.
Cosmic Blue said:
yes, you need to enable geotagging for the location to work. you can find it in the camera's submenu.
Click to expand...
Click to collapse
Tks for the infor.
There isn't a geotagging under the camera's submenu but there is a gps tag option. i enabled it and still nothing happen.
Do i need to download the geotagging?
I think you need to turn your device GPS on with that option. Yes, GPS tag is geo tagging.
Regards.
ithehappy said:
I think you need to turn your device GPS on with that option. Yes, GPS tag is geo tagging.
Regards.
Click to expand...
Click to collapse
Yes! It is working now. Thank you very much!
I am interested to find out what API calls the guys that write flashlight apps are using?
When trying to start the flash using Android documented API, I get only low intensity of light. Theirs is much stronger. I am sure they are using undocumented calls. The phone is Samsung Galaxy S2.
An example for a flashlight app is here:
https://play.google.com/store/apps/d...uni.flashlight
Any help would be appreciated ! thanks
CrazyMcCool said:
I am interested to find out what API calls the guys that write flashlight apps are using?
When trying to start the flash using Android documented API, I get only low intensity of light. Theirs is much stronger. I am sure they are using undocumented calls. The phone is Samsung Galaxy S2.
An example for a flashlight app is here:
https://play.google.com/store/apps/d...uni.flashlight
Any help would be appreciated ! thanks
Click to expand...
Click to collapse
+1 ?
Hello,
Lots of devices from low to mid-end range don't have gyroscope installed, and thanks to that have AR capabilities severely decrased.
I'm working on Xpose module that uses Accelerometer and Magnetic Field Sensor to simulate Gyroscope output.
Module works by creating new Sensor instance and injecting it into SystemSensorManager sensor list after its constructor, so getDefaultSensor(Sensor.TYPE_GYROSCOPE) will return it.
Module registers then SensorEventListeners for accel and magnet sensors and does it's calculations on accelerometers update and calls onSensorChanged of listener that uses it.
I'm still working on calculating velocities properly and getting good quality noise-free output. I did some progress on this but it still does not work as intended. (rotation directions seem correct, or maybe are swapped or inverted, but that can by easily fixed, problem is with values, which are simply wrong.) Testing it is a problem though, since I don't own any device with actual gyro, so I'll be gratefull for any feedback.
xda won't let me post normal link yet, so here is repo: https://github.com/Mourdraug/GyroEmu/
And here is apk: https://github.com/Mourdraug/GyroEmu/raw/master/app/GyroEmu_0.1.apk
Woah, i thought that was impossible. Continue bro, this'll be an interesting module..[emoji106]
Sent by a Cool Guy using XDA-Developers mobile app
Cool!!
Sent from my SM-E700H using Tapatalk
Amazing bro
Sweet!
Tested it a little bit. Well, it's okay on my 1st gen. Moto G. Tried to create pano in Google Camera. Can move my phone only vertically. So no horizontal reaction at all.
Thanks for your work! Keep it going on!
Interesting!!!
Continue the good work.
good work…
keep continue .
Already such a module in repo
How to install this without root / Xposed.Is it possible to modify the APK (I need the Street View and Google Camera apps patched for Samsung Galaxy J2 which has no gyro) .
Suici Doga said:
How to install this without root / Xposed.Is it possible to modify the APK (I need the Street View and Google Camera apps patched for Samsung Galaxy J2 which has no gyro) .
Click to expand...
Click to collapse
It's an xposed module so that would be a no
Hi, don't work on my phone, I have a Vernee Thor.
Good Luck !
Envoyé de mon thor en utilisant Tapatalk
Guys, does anybody of you know if there is a site listing ALL sensors mounted on smartphones? On all sites I only find partial, approximate and untrustable informations about this topic.
Neat!
Great work man! This is definitely a great news for those low-end devices..
would be good for Moto X Play owners
---------- Post added at 07:58 PM ---------- Previous post was at 07:27 PM ----------
as of now, doesnt work on Moto X Play. Rooted with xposed
jumpjack said:
Guys, does anybody of you know if there is a site listing ALL sensors mounted on smartphones? On all sites I only find partial, approximate and untrustable informations about this topic.
Click to expand...
Click to collapse
gsmarena
jumpjack said:
Guys, does anybody of you know if there is a site listing ALL sensors mounted on smartphones? On all sites I only find partial, approximate and untrustable informations about this topic.
Click to expand...
Click to collapse
Just use an app that reads your hardware so you are on the safe side
Kinscreen, an app to keep screen on by positions and other related screen-on/screen-off functions, original complained about lack of gyro. Upgraded version got around this, works like a charm. Might have done the same as this module.
BlueFlame4 said:
Just use an app that reads your hardware so you are on the safe side
Click to expand...
Click to collapse
I need to know BEFORE purchasing the phone!
Dovidhalevi said:
Kinscreen, an app to keep screen on by positions and other related screen-on/screen-off functions, original complained about lack of gyro. Upgraded version got around this, works like a charm. Might have done the same as this module.
Click to expand...
Click to collapse
Hi, I prefer Gravity Screen
Envoyé de mon thor en utilisant Tapatalk
I can't use the camera app. Sing! app by smule is also not working perfectly. When I start to sing with the video recording turned on, it starts recording nicely and my face is shown in the screen through my webcam. But after my recording, i can't see any video that recorded. A black screen is showing instead of that.
So please help me....
I am using Remix OS for PC.
If the camera is not working, it means that the drivers are probably missing from the kernel.
There are threads here that deal with replacing the kernel, so you should checl them as they may help.
Camera Problem in Remix OS
moriel5 said:
If the camera is not working, it means that the drivers are probably missing from the kernel.
There are threads here that deal with replacing the kernel, so you should checl them as they may help.
Click to expand...
Click to collapse
Please give the link of that helpful thread.
AmbelVijay said:
Please give the link of that helpful thread.
Click to expand...
Click to collapse
Sorry about the late reply, I don't have as much time as I used to have.
As I has already stated, there are multiple threads dedicated to that purpose, you just need to search the subforum, and I stress this, the is a search function, you need to search and read.
And here is a (recent) example of such a thread: https://forum.xda-developers.com/remix/remix-os/remix-os-updated-to-kernel-android-x86-t3596789
Hello everyone,
i have a small question. Couldn't find a solution so far.
Is it possible to use the fingerprint sensor within Tasker? I simply want to turn off the display by pressing the fingerprint sensor. In Lineage OS this function is not available so i want to do it on my own.
Greetings and thanks,
I'm not sure about tasker, but this one worked for me: https://play.google.com/store/apps/details?id=com.ztc1997.fingerprint2sleep
supacrazyguy42 said:
I'm not sure about tasker, but this one worked for me: https://play.google.com/store/apps/details?id=com.ztc1997.fingerprint2sleep
Click to expand...
Click to collapse
This app works just fine. Friends told me about it already. But somehow it must possible to access the sensor within tasker or an java object. Just don't know where to look.
Cloonix said:
This app works just fine. Friends told me about it already. But somehow it must possible to access the sensor within tasker or an java object. Just don't know where to look.
Click to expand...
Click to collapse
Ah yeah that would be ideal, maybe here: https://www.google.co.uk/amp/s/www....e-custom-fingerprint-actions-with-tasker/amp/