Hello All,
my Xperia Go rooted and install cwm-1.0-lotus on it. after that i boot to CWM and Wipe Data / Factory Reset also Wipe cache partition then i try to install cm-10.1-20130720-NIGHTLY-lotus from SD-card but i get [STATUS 7] error. i think the problem that i forget to make "fastboot" for the "boot.img" kernel. i didn't know if that really is the problem!
now my phone keep stuck on Sony logo before reach the CWM boot menu, i can not enter to the boot menu. i try using Sony PC Companion but when connect my phone to usb it turn on and keep stuck on the logo and Companion can not connect to my phone.
so please if anyone has a solution for that tell me about it to fix my phone.
Thanks All..
bilalhdh said:
Hello All,
my Xperia Go rooted and install cwm-1.0-lotus on it. after that i boot to CWM and Wipe Data / Factory Reset also Wipe cache partition then i try to install cm-10.1-20130720-NIGHTLY-lotus from SD-card but i get [STATUS 7] error. i think the problem that i forget to make "fastboot" for the "boot.img" kernel. i didn't know if that really is the problem!
now my phone keep stuck on Sony logo before reach the CWM boot menu, i can not enter to the boot menu. i try using Sony PC Companion but when connect my phone to usb it turn on and keep stuck on the logo and Companion can not connect to my phone.
so please if anyone has a solution for that tell me about it to fix my phone.
Thanks All..
Click to expand...
Click to collapse
Flash stock FTF. Steps:-
Power off you phone by pressing Vol+ and Power button continuously up till 3 vibrations.
Hold Vol- Button and connect phone to PC.
Using flashtool flash stock FTF file.
Hope I helped, Please press the thanks button. Good Luck!
moli2398 said:
Flash stock FTF. Steps:-
Power off you phone by pressing Vol+ and Power button continuously up till 3 vibrations.
Hold Vol- Button and connect phone to PC.
Using flashtool flash stock FTF file.
Hope I helped, Please press the thanks button. Good Luck!
Click to expand...
Click to collapse
i try that but also when ask to connect the phone to PC i turn it on then press Vol- Button but the flashtool did not recognize it, i try Vol- by holding it then plug the usb cable but not work... i also try the back button even not work.
problem of flashing was that iam power on the phone when press Vol-, it work now, i start flashing i hope all work correctly..
Thanks..
Have the same problem with my XGo,
I rooted Xperia Go, installed cwm-1.0-lotus-t5200mod_v2_1, copied cm-10-20131224-FXP-lotus (for locked bootloader) on internal memory. Then i entered CWM and wiped data,dalvick-cache and battery stats, BUT i forgot to install (flash) CM-10 and i just reboot the system. Now i cannot get into CWM i get only to the SONY logo. I can turn of the phone only with VOL+ and OFF button for holding them for 3 vibrations (hard reset).
When i try to connect the phone to PC with (Hold Vol- Button and connect phone to PC) i get green led light for 3 sec and then it goes off, pc says
that the phone is not working corectly and it doesn´t recognize the phone. What else can i do?
Related
Hello, I'm new on this site, and already I need help.
Here is problem:
I rooted my Xperia S, and I regret for that (it's kind of slower, and I hate that) but beside that, I was trying to find solution to speed it up. U flashed the kernelV2, I mean that I think I was xD And then my wifi didn't work. So I googled up a lil bit, and find the kernel named "DooMKernel". I followed instructions and nothing, so I shut down my phone, actually reset it (holding POWER buton and VOLUME UP until it vibrates 3 times), and after that nothing, my phone wont turn on. As I remember my phone was at 35% of battery. And only hope that I have is, when I plug USB in my laptop, it makes a sound of connected device, and install SEMC Flash Device . I'm very afraid that my phone is broken, cause, I have it about 10 days, and I'm new android user. Don't take me too noob, I read lot of forums, tips, solutions, but in the end, I'm new in all this.
So, please does anyone have any solutions, what can I do? Please! (P.S. my phone is plugged in charger for about half of hour, without any response or light)
Thank you all, anyway.
Are you on ics rom? If yes doomkernel wont work
Connect phone to pc in fastboot mode by pressing power and vol up hold it till the first vibrate now release only the power button if the led turns blue flash the xsx kernel (example)
If you are on gb rom try to reinstall the system using pccompanion enter flasode by pressing power and vol up till the first vibrate now only push vol down and flash
Sent from my LT26i using xda premium
mericon said:
Are you on ics rom? If yes doomkernel wont work
Connect phone to pc in fastboot mode by pressing power and vol up hold it till the first vibrate now release only the power button if the led turns blue flash the xsx kernel (example)
If you are on gb rom try to reinstall the system using pccompanion enter flasode by pressing power and vol up till the first vibrate now only push vol down and flash
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Thank you for response.
I tried that, to put it in fastboot mode, nothing. My phone doesnt show any kind of led light in any situations (red when is in charger, blue in fastboot mode, green is flashmode). Only when I connect my phone on laptop it makes a sound of new device connected named SEMC Flash Device. I was thinking to fall apart my phone, to put out battery, maybe that would help.
It helped!!!! I didn't see your answer very well. Thank you!!! Is there anyway to put phone back unrootet, cause I don't like it, its kind of slowy
mericon said:
Are you on ics rom? If yes doomkernel wont work
Connect phone to pc in fastboot mode by pressing power and vol up hold it till the first vibrate now release only the power button if the led turns blue flash the xsx kernel (example)
If you are on gb rom try to reinstall the system using pccompanion enter flasode by pressing power and vol up till the first vibrate now only push vol down and flash
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Can you give me some advice, what kernel to use, how to flash it, ect?
I'd give you a big hug, you don't know how much you helped me (nothing gay)
Try this to install the drivers correctly
http://forum.xda-developers.com/showthread.php?t=1554632
Sent from my LT26i using Tapatalk 2
try this:
hold the power button + volume up then wait till it vibrates 3 times, your phone will power off,
1. install flashtool
2. download ftf
3. paste the ftf on c:\firmwares\
4. open flashtool then click the lighting icon, choose fastmode, choose ftf and wait until it says (power off phone then connect via fastmode), since your phone is power off all u need to do is to connect the phone and then hold the power button+ volume down.
5. then it will reinstall your firmware.
6.after installing unplug your phone then power it on.
voila its working now
Hi guys,
Bought today a used Xperia P, with a unofficial CM11-4.4.2 from from March 2014...
Well i conect the phone to PC and copy the last rom from CM11 4.4.4 (percy_g2) to sdcard and try to install it.
Give me some error... so i try to instal again the unofficial one that was already on the sdcard... and same error!!!! and didn´t install...
Well at this time i still have acess to CMW, and try to install a the old rom "LT22i_6.1.B.0.544_CentralEurope" , but before i do it i do wipe cache /dalvik / factoy / format system / cache / etc.. and by mistake format sdcard!!!!!!! what a asswhole!!
Of course it stuck on the sony logo. I can shut down pressing vol up + power until vibrate 3 times and its all.
Can´t put it in flasmode to use flastool because when i insert usb cable with the vol down press, in PC it came with the information of "can´t install drivers" and phone turn on again to the sony logo...
Any help ?
SOLVED
Hello again,
After a all night awake i can solve it.
Since i can´t enter in flash mode , i try a lot of combinations and it came up.
So this soltuion is for only who CAN´T ENTER IN FLASHMODE with flashtool.
1- Download flashtool 0.9.8.0
2- Install drivers for xperia P, drivers for flashmode and flasboot (they are the last in the select box)
3- Select the flasmode icon and select the TFT file you want, i use the " LT22i_6.1.B.0.544_CentralEurope " - Please check box "NO FINAL VERIFICATION"
4- In the phone press VOL UP and plug in the usb cable
5- wait a minute +/- and if in the program flashtool nothing happens, just let VOL UP and press VOL DOWN and the flash will start
6- STILL PRESSING VOL DOWN during all flash.
Works for me!
tablet: Xperia z1 tablet, sgp311, lollipop 5.0.2
It stopped booting after I had wiped the Dalvik cache, system, data, cache and then TWRP(Custom recovery) asked my if I wanted to install super user and now my tablet wont turn on now, It has a red notification light but thats it. When I hold the power button and the volume up button all that appears is the sony screen then it turns off. If I hold the power button and volume up button for longer it does the three led flashes but then it just shuts down.
I can put my device into fastboot mode and access it using flashtool in fastboot but not flashmode.
Anyone have any suggestion on how to fix this?
you've wiped everything including android (system partiton) hence why its not booting.
to get it into flash mode make sure its turned off, then press and hold the volume down key while inserting the usb cable. is your bootloader unlocked? (guess it must be if youve flashed TWRP)
podycust said:
you've wiped everything including android (system partiton) hence why its not booting.
to get it into flash mode make sure its turned off, then press and hold the volume down key while inserting the usb cable. is your bootloader unlocked? (guess it must be if youve flashed TWRP)
Click to expand...
Click to collapse
Thanks I managed to flash android 5.1.1 onto my device, I downloaded it through flashtool.
I accidentally restore a backup (of my previous Z2 which was on my sd card through TWRP) on my Z2 on Exsistenz LP ROM yesterday. After that phone wont boot. Battery was .70% at the time of death. Red blinking led is seen when connected to usb cable. POWER + VOL UP doesn't give 3 vibes as intended, in fact nothing. Neither red hard reset button(Tried pressing it for >3mins). Cannot enter flash mode or fast boot modes .(tried to flash stock ROM through flash tool-failed). Only red blinking LED appears when usb cable connected.
Wierd to found when I press hard reset button while pressing POWER button it gives 3 vibes. But nothing changed.
Tried "pressing and holding all 3 buttons (power,vol+and vol-) all at the same time till it vibrates once then let go of the power button and vol+ but keep holding vol - while plugging in the usb cable this MiGHT boot your phone into flash mode" But didn't vibrate while holding all 3 buttons.
Its out of warranty period as well.
Please help me to recover to recover??? :crying:
use flashtool and flash stock ftf.
connect phone with usb cable when flashtool prompt to connect the phone
jhha said:
I accidentally restore a backup (of my previous Z2 which was on my sd card through TWRP) on my Z2 on Exsistenz LP ROM yesterday. After that phone wont boot. Battery was .70% at the time of death. Red blinking led is seen when connected to usb cable. POWER + VOL UP doesn't give 3 vibes as intended, in fact nothing. Neither red hard reset button(Tried pressing it for >3mins). Cannot enter flash mode or fast boot modes .(tried to flash stock ROM through flash tool-failed). Only red blinking LED appears when usb cable connected.
Wierd to found when I press hard reset button while pressing POWER button it gives 3 vibes. But nothing changed.
Tried "pressing and holding all 3 buttons (power,vol+and vol-) all at the same time till it vibrates once then let go of the power button and vol+ but keep holding vol - while plugging in the usb cable this MiGHT boot your phone into flash mode" But didn't vibrate while holding all 3 buttons.
Its out of warranty period as well.
Please help me to recover to recover??? :crying:
Click to expand...
Click to collapse
Something similar happened to me recently...wonder if this is a bug in a new release or something
This is what I did.
If you can't turn off phone, turn it off using the hard reset button http://sony-xperia.mobi/eng/sony-xperia-z2/231-how-to-do-a-hard-reset-and-reboot-a-sony-xperia-z2-physical-hard-reset-button-sony-xperia-z2.html
There's a really good guide on bricked z2 somewhere on xda but I can't find it anymore . What it said was useflashtools and flash and old ftf e.g. 4.4.4 or 4.4.2 and make sure to wipe apps_log and user_data in settings.
This might also help http://forum.xda-developers.com/showthread.php?t=1849170
Thanks for advice. The problem is it wont connect in flash mode. (attached usb with VOL DOWN button pressed & hold still gives only red blinking led)
jhha said:
Thanks for advice. The problem is it wont connect in flash mode. (attached usb with VOL DOWN button pressed & hold still gives only red blinking led)
Click to expand...
Click to collapse
Did you get it fixed?
jhha said:
Thanks for advice. The problem is it wont connect in flash mode. (attached usb with VOL DOWN button pressed & hold still gives only red blinking led)
Click to expand...
Click to collapse
If you restored another XZ2 with LOCKED BOOTLOADER's backup you probably killed your phone.
Was your bootloader unlocked?
Restoring anothers TA partition kills your device because drm keys are uniq
hey guys i did somethign wrong obviously i flashed a rom (my bad) while i was on an another rom and now my Phone stucked in Sony logo .
i tried to press volume down button to go into recovery but it doenst work.! what should i do?? i can only turn off phone with Power button + Holding Volume Up button ! i connect my phone with this procedure on xperia companion and now i am repairing software!
is this the only solution or i can get to recovery with another method and just restore my Previous rom backup?
If you have an unlocked BL, flash a custom stock-based kernel and use its recovery to restore your backup.
You can also use flashtool. Sony Companion isn't a bad way to restore device though, used this a couple of times myself.
Thieuke said:
You can also use flashtool. Sony Companion isn't a bad way to restore device though, used this a couple of times myself.
Click to expand...
Click to collapse
i did it this way! restored phone and now its ok
how to use flashtool to restore it my phone as well stuck at the xperia logo and volume down+ power doesn't work
only red led when i connect via usb
@pharaon said:
how to use flashtool to restore it my phone as well stuck at the xperia logo and volume down+ power doesn't work
only red led when i connect via usb
Click to expand...
Click to collapse
I think it is first power on then press volume down,not meanwhile
@pharaon said:
how to use flashtool to restore it my phone as well stuck at the xperia logo and volume down+ power doesn't work
only red led when i connect via usb
Click to expand...
Click to collapse
In flashtool, you need to power off the device then hold - vol and then insert usb cable while holding - vol.