Hello everyone,
Here's a tip to easily get the latest official updates so the Casio CA201L.
1 / Go to the Android market and install> crossVPN.
2 / Create an account crossVPN from android.
3 / Turn on airplane mode and then reactivate WIFI only.
4 / Login to your account and then select crossVPN the server> State: Busan, Korea.
5 / Go to> Settings> About phone> System updates> Update now> Update by network.
6 / CA201LE470 new release will be displayed.
pierre144 said:
Hello everyone,
Here's a tip to easily get the latest official updates so the Casio CA201L.
1 / Go to the Android market and install> crossVPN.
2 / Create an account crossVPN from android.
3 / Turn on airplane mode and then reactivate WIFI only.
4 / Login to your account and then select crossVPN the server> State: Busan, Korea.
5 / Go to> Settings> About phone> System updates> Update now> Update by network.
6 / CA201LE470 new release will be displayed.
Click to expand...
Click to collapse
Idk, but the update available was on only 12MB and I still have running is 4.0.4. Everything went well, though. Big tnx for the steps. I gotta try to download the actual software on PC and do it that way. Unless, I missed something.
konchar_vlada said:
Idk, but the update available was on only 12MB and I still have running is 4.0.4. Everything went well, though. Big tnx for the steps. I gotta try to download the actual software on PC and do it that way. Unless, I missed something.
Click to expand...
Click to collapse
Hi,
I'll confirm that the update is 12 mo, depending on your build out I was 333 so I had a number of update.
I no longer have the option to update. Going to >general>about device>software updates and the only things listed now are "update now / auto update / and wifi only.
Update PRL:
Update Profile:
UICC Unlock: -------Are not even there anymore.
I am on this Rom------ [ROM][ViSiON-X][N900PVPUDNH7 1.0][N900P][4.4.4 TW][10-29-14] by AxAtAx , his thread is closed so i can get no help there now.
What to do other than install a different rom ?
I'm using a VS985 with stock Android 35b on it. I'm using this phone on the Tracfone service, which uses Verizon towers in my area. I've been hoping to upgrade to Marshmallow, but from what I've read, the Verizon Upgrade Assistant no longer works for phones that it does not detect an active Verizon sim card in.
I uninstalled the Assistant program and when I reinstalled it, I right-clicked on it and chose "check for upgrade." When the upgrade was found, it gave me the option to "Upgrade device now" and then proceeded to download a large file. I tracked down that file and it appears to be the latest kdz file, called "VS98548A_03_0628.kdz" and is 1.50 gigs in size. However, when I connect my phone to my computer, the Assistant switches from a status of "Upgrade Available" to "Up to Date" after running a "Checking the device information" task. This appears to check online for an active Verizon sim card, as it doesn't work at all if I'm not connected to the internet. I get the same behavior with my Tracfone sim card or the Verizon sim card that came with the phone.
My question is if there is anyway to get this utility to work or if there is an alternative way to install the kdz file it downloaded without rooting my phone. I wonder if there is a way to get the Assistant to work without checking for a active Verizon sim card.
I can't address regarding the official tool - its flaky and I've had that trouble sometimes.
However, you can get the 48A KDZ from my link at the bottom of the first post of @annoyingduck 's stickied return to stock thread in the General section, also in my signature below, and flash it with LG Flash Tool 2014 which that thread is a guide for.
Be sure to read the second post too, I believe it is, if you have any trouble with LG Flash Tool 2014.
Hi, I wanted to change the country code to get native support for call recording. I did this, converted my device to C675 (India) and got the native CallRecording_10.1.0.apk, which is now distributed on all Huawei forums.
1. Download and install the Octoplus Huawei Installer v1.2.2 from https://octoplusbox.com/
2. Pay for a license for 6 months, and you`ll receive the activation code to your email. (P.S. I have nothing to do with this site or the author of the program)
3. Run the program and input the activation code.
4. Follow the instructions on the upper left side of the window, put the smartphone into the On/OFF Factory Mode state (the lowest button on the right in the picture). The program downloads some code from the Internet that is necessary for your smartphone model, and the smartphone turns into a temporary brick until you bring it back to working condition on step 7.
5. On the computer, an unidentified "Other device" USB SER appears in the Device Manager, the device does not respond to anything, does not turn on, only sometimes vibrates when you press different key combinations. Use the device Manager to install huawei com1.0 driver (at the bottom of this message).
6. After that, the program discovers the smartphone, and the "Repair" tab on the right under "Actions" becomes active, with almost all its fields active. In the Country code field, change the country by manually entering the necessary letters. I changed it from ru to in, but you can change to any other region, for example, you can convert the device from China to any European country.
7. Again, click On/OFF Factory Mode, the program flashes the original code to the smartphone, bringing it back to life, it reboots, and data is reset.
8. After the reboot, the smartphone will have a new region code, but the firmware is still from the previous region, so you have to flash (to dload) the firmware of the new region. Another data reset occurs, and you get the device from the new region, with OTA working and so on.
Hello there. Change the country code to make all data on smartphones gone?
rm001 said:
Hi, I wanted to change the country code to get native support for call recording. I did this, converted my device to C675 (India) and got the native CallRecording_10.1.0.apk, which is now distributed on all Huawei forums.
1. Download and install the Octoplus Huawei Installer v1.2.2 from https://octoplusbox.com/
2. Pay for a license for 6 months, and you`ll receive the activation code to your email. (P.S. I have nothing to do with this site or the author of the program)
3. Run the program and input the activation code.
4. Follow the instructions on the upper left side of the window, put the smartphone into the On/OFF Factory Mode state (the lowest button on the right in the picture). The program downloads some code from the Internet that is necessary for your smartphone model, and the smartphone turns into a temporary brick until you bring it back to working condition on step 7.
5. On the computer, an unidentified "Other device" USB SER appears in the Device Manager, the device does not respond to anything, does not turn on, only sometimes vibrates when you press different key combinations. Use the device Manager to install huawei com1.0 driver (at the bottom of this message).
6. After that, the program discovers the smartphone, and the "Repair" tab on the right under "Actions" becomes active, with almost all its fields active. In the Country code field, change the country by manually entering the necessary letters. I changed it from ru to in, but you can change to any other region, for example, you can convert the device from China to any European country.
7. Again, click On/OFF Factory Mode, the program flashes the original code to the smartphone, bringing it back to life, it reboots, and data is reset.
8. After the reboot, the smartphone will have a new region code, but the firmware is still from the previous region, so you have to flash (to dload) the firmware of the new region. Another data reset occurs, and you get the device from the new region, with OTA working and so on.
Click to expand...
Click to collapse
I do not think there is a need to do these steps. Just download and install one of the attached APKs. One is for EMUI 10.1 and the other one is for EMUI 11 and 12 (version number 11.0.0.109).
Having a hell of a time getting my S7 updated. It's a LTE (Verizon) version yet it does not have a SIM card or data plan active. Whenever I go to check for updates, I'm being told it is up to date. Current Android version is 10. I'd like to get this to Android 13 if possible.
So I tried to manual path. I downloaded Smart Switch per one recommendation, and that does not pop up any "updates available" messaging. I downloaded the Verizon/Samsung upgrade utility and it does not see the device. So my next idea is to use ODIN. Herein lies my problem: I cannot find Verizon firmware (Android 13) for this device. Verizon has a huge guide on the new version but no download links to the firmware to be found. Sammobile does not have it, and the other Samsung firmware sites only seem to have 12.
Any recommendations would be extremely helpful.