My LG E970 does not have an usb connection to the computer.
I tried connecting in fastboot and ADB via command prompt, the computer does not see it.
It says slow charging when connected to a computer, 2 different computers.
I have the LG united drivers installed, reinstalled and rebooted.
I was on 4.4 and I did a restore to stock ATT 4.1.2, still no luck.
I'm out of ideas.
EDIT:
I tried LGNPST from: http://pastebin.com/bRpR3aB6
I put it into download mode and the phone shows "DOWNLOAD MODE" "DO NOT UNPLUG the device until the process is complete"
It only shows that, LGNPST does not detect anything.
edroit said:
My LG E970 does not have an usb connection to the computer.
I tried connecting in fastboot and ADB via command prompt, the computer does not see it.
It says slow charging when connected to a computer, 2 different computers.
I have the LG united drivers installed, reinstalled and rebooted.
I was on 4.4 and I did a restore to stock ATT 4.1.2, still no luck.
I'm out of ideas.
EDIT:
I tried LGNPST from: http://pastebin.com/bRpR3aB6
I put it into download mode and the phone shows "DOWNLOAD MODE" "DO NOT UNPLUG the device until the process is complete"
It only shows that, LGNPST does not detect anything.
Click to expand...
Click to collapse
From there you need to select the ls970.dll and the bin file in lgnpst.
Sent from my Optimus G using xda app-developers app
mikeylikey said:
From there you need to select the ls970.dll and the bin file in lgnpst.
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
It won't let you select anything unless something is detected. Example: "UNKNOWN PORT 01"
And nothing is detected.
edroit said:
It won't let you select anything unless something is detected. Example: "UNKNOWN PORT 01"
And nothing is detected.
Click to expand...
Click to collapse
Try Kush's universal adb drivers for windows. If you are running Win8.1, make sure it's usb2.0 and not 3.0. If it still doesn't see it, try a different windows os.
Sent from my Optimus G using xda app-developers app
mikeylikey said:
Try Kush's universal adb drivers for windows. If you are running Win8.1, make sure it's usb2.0 and not 3.0. If it still doesn't see it, try a different windows os.
Sent from my Optimus G using xda app-developers app
Click to expand...
Click to collapse
I tried the different drivers, still "slow charge mode on the phone." It is suppose to pop up that USB debugging notification on the phone if it senses a computer connection. I'm using windows 7 and usb 2.0 only. Tried on different computer, still slow charging mode.
did you turn on "usb debug" in setting->Develop options?
savingwizard said:
did you turn on "usb debug" in setting->Develop options?
Click to expand...
Click to collapse
Yes, it is on. Still only "slow charging mode"
Still not working after I flashed SnowLepoardJB's 800MB+ stock ROM. Any other suggestions?
Hi, I'm joining this thread since I have the same problem... My phone charges, but no device connection. Could there be a kernel module missing? Is there a way to check? A #lsmod type command?
Sent from my JY-G3 using xda app-developers app
Ok... I got a new USB cord and it works now.
Sent from my JY-G3 using xda app-developers app
brainstormtrooper said:
Ok... I got a new USB cord and it works now.
Sent from my JY-G3 using xda app-developers app
Click to expand...
Click to collapse
Good for you. I tried different USB cords, and it still doesn't work.
Well, if you can select USB debugging and charge the phone over USB, but the phone doesn't notice the computer then it may be a damaged USB port... I saw a thread about that on a Kindle I think... But it sounds like software isn't the problem... Good luck.
Sent from my JY-G3 using xda app-developers app
I recently had the same problem and my solution was to use the Koush Universal ADB Driver recommended by someone else. Prior to that all I could see the contents of my SD card and external SD card on the computer but always had some sort of driver issues and Windows telling me my driver wasn't installed correctly.
Using the official LG driver from the website didn't seem to help either.
OK... I know this thread has gotten old, but here's the final deal... It wasn't "exactly" the USB cables. It WAS the plug. The plug wasn't broken, just very dirty. I cleaned it out with a toothpick and now even the old cord works fine... So if you can't get the computer and phone to recognize each other, try cleaning the micro port in the phone
Sent from my JY-G3 using XDA Free mobile app
can't connect in download mode with Windows 8.1
brainstormtrooper said:
OK... I know this thread has gotten old, but here's the final deal... It wasn't "exactly" the USB cables. It WAS the plug. The plug wasn't broken, just very dirty. I cleaned it out with a toothpick and now even the old cord works fine... So if you can't get the computer and phone to recognize each other, try cleaning the micro port in the phone
Sent from my JY-G3 using XDA Free mobile app
Click to expand...
Click to collapse
My issue is that I can't connect to my computer with Windows 8.1 in Download Mode. If I want to flash, I need to find a friend who is using Windows 7. Can anybody help with this?
Other details: I've tried cleaning the ports, using another cable, using other USB connections, etc. When in Download Mode, SDK can't even detect the device. I'm pretty sure it's the fact that I'm using Windows 8.1, but I don't know what to do to fix this problem.
Thanks!
billp000 said:
My issue is that I can't connect to my computer with Windows 8.1 in Download Mode. If I want to flash, I need to find a friend who is using Windows 7. Can anybody help with this?
Other details: I've tried cleaning the ports, using another cable, using other USB connections, etc. When in Download Mode, SDK can't even detect the device. I'm pretty sure it's the fact that I'm using Windows 8.1, but I don't know what to do to fix this problem.
Thanks!
Click to expand...
Click to collapse
Not sure why you want to put your phone in download mode
If your just trying to connect your phone via USB to mount storage (meaning getting file off the internal storage and sd card), it should work fine.
If your trying to root your phone, you need to grab the android sdk and use the adb commands.
Gysper said:
Not sure why you want to put your phone in download mode
If your just trying to connect your phone via USB to mount storage (meaning getting file off the internal storage and sd card), it should work fine.
If your trying to root your phone, you need to grab the android sdk and use the adb commands.
Click to expand...
Click to collapse
The reason is that my phone is "bricked." I'm caught in a boot loop. The bootloader is locked on my LG phone so I can only get into Download Mode to fix stuff. But I can't fix stuff if my computer doesn't recognize my device. (I can connect fine when my phone boots up properly; just not in Download Mode). I've installed and uninstalled the LG drivers many times, so this is not the issue. What can I do with my Windows 8.1 computer to connect with my phone in Download Mode? Again, I CAN connect to Windows 7 computers, but I don't have one convenient to use, and I don't want to install lots of software on friends' computers...
billp000 said:
The reason is that my phone is "bricked." I'm caught in a boot loop. The bootloader is locked on my LG phone so I can only get into Download Mode to fix stuff. But I can't fix stuff if my computer doesn't recognize my device. (I can connect fine when my phone boots up properly; just not in Download Mode). I've installed and uninstalled the LG drivers many times, so this is not the issue. What can I do with my Windows 8.1 computer to connect with my phone in Download Mode? Again, I CAN connect to Windows 7 computers, but I don't have one convenient to use, and I don't want to install lots of software on friends' computers...
Click to expand...
Click to collapse
Try these steps and see if it works: http://forum.xda-developers.com/showthread.php?t=2013067
Gysper said:
Try these steps and see if it works: http://forum.xda-developers.com/showthread.php?t=2013067
Click to expand...
Click to collapse
That is what I would like to be able to do, but it assumes your device is recognized. One of the other posts on the same thread mentioned a similar issue but didn't mention a solution.
I've done some more exploring. I have, again, uninstalled and reinstalled the appropriate LG E970 drivers from the LG support site.
- When I am in fastboot mode, I see the attached image "01 Android.png" in device manager.
- When I am in recovery mode, I see the attached image "02 LG E-970.png" in device manager.
- When my phone fully boots up, I see the attached image "03 LGE Android MTP Device.png" in device manager. At this point, and only at this point, abd will list my phone as a device.
The problem is, I need a connection to my computer from recovery / download mode in case of a boot loop.
Can anyone help?
Related
Every time I plug it in the PC says USB device not recognized!?? The device has malfunctioned yes i have the drivers
WTF I t has never done this before
I am in download mode this happens when you unplug it during ODIN install so my phone needs to be recognized in order to go back to stock.
Get Windows 7
Sent from my SGH-T959 using XDA App
i have windows 7
Then delete the drivers. I've never downloaded drivers before on my laptop. You can also change wires and USB ports
Sent from my SGH-T959 using XDA App
i dont hvae an extrAONE
Go borrow one lol
Sent from my SGH-T959 using XDA App
try another USB port?
sotodefonk said:
try another USB port?
Click to expand...
Click to collapse
already did same stuff
This happens all the time on my other Windows 7, i gave it to my bro, i didnt' want it...
but what worked for me is switching computers... it just did idk how.
Try another computer, windows XP works best with me everytime dunno why.
thnaks will try tomorrow at my firends house
I had the same problem everyone was telling me that was download mode but it wasn't so get into download with the following instructions.
1. Open odin do not skip this step as you need to open odin first.
2. Take out the battery to turn off the completely
3. Put the battery back in.
4. While holding the two volume buttons plug in your usb cable. Bam your in download mode
Trust me on this method as I freaked out trying to fix it but it worked. Keep trying if it doesn't work.
Sent from my GT-I9000 using XDA App
^ hes not having trouble getting into download mode.. It's the phone isn't recognized by pc...
Have tried restarting your comp yet...? After uninstalling your current drivers than reinstalling after a reboot.
But that isn't download mode I'm sure of it
xriderx66 said:
^ hes not having trouble getting into download mode.. It's the phone isn't recognized by pc...
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
From my experience the usb port on your device is ruined.... The only way I can think of fixing it is desolder the usb port and solder a new one.... Get a new board for your phone or.... send to samsung. I had the same problem Mine was like a brick and I just send it to samsung.
NO!!!!!!!!!!!
I tried a new USB and it still didn't work.
Did you delete/install the new drivers, correctly?
What rom were you on? you made need the nexus s drivers if cm7/miui
EDIT, also, i have posted many times that ODIN NEVER works for me when my webcam is connected. Unplug it and reboot.
s15274n said:
Did you delete/install the new drivers, correctly?
What rom were you on? you made need the nexus s drivers if cm7/miui
EDIT, also, i have posted many times that ODIN NEVER works for me when my webcam is connected. Unplug it and reboot.
Click to expand...
Click to collapse
Wow thought I was going crazy on my windows 7 computer, if I leave my web cam plugged odin doesn't work, thankfully I have a desktop, so its easy as to the pull the cord
I don't have any USB device connected other than the mouse on PC. i have even tried on my laptop with no mouse.
I have downloaded pit file and uvjfd.tar two times from the forums.
I have tried flashing multiple times from both my PC & laptop using Odin 3.0 v1.0, v1.85, v3.07(latest), EZOdin v1.70 and installed Samsung USB drivers multiple times, even downloaded latest driver version from official Samsung Vibrant page.
I have tried flashing from all possible USB ports on my PC & laptop wherever the phone was being recognized. But now with the latest official Samsung Vibrant drivers, my phone is not being detected by any USB port on my PC.
But whenever I have flashed, Odin is stuck at Cache or Modem or recently(with latest samsung drivers), DO NOT TURN OFF TARGET !!
I have even tried flashing through Heimdall 1.3.1 but the zadig.exe shows the device only as 'Gadget Serial' no matter how many times I try, and installs the driver with device as Gadget Serial under libusb in Device Manager and I also tried by updating driver as Samsung Composite USB as mentioned in readme. Either Way Heimdall frontend will not flash and says "Failed to detect compatible download-mode device".
Edit: I tried with another USB cable, of LG GS500v, and Oh Lord Jesus, Odin flashed past it. Great, time to buy a new Samsung USB cable, now!
PROBLEM SOLVED
parasharenator said:
I don't have any USB device connected other than the mouse on PC. i have even tried on my laptop with no mouse.
I have downloaded pit file and uvjfd.tar two times from the forums.
I have tried flashing multiple times from both my PC & laptop using Odin 3.0 v1.0, v1.85, v3.07(latest), EZOdin v1.70 and installed Samsung USB drivers multiple times, even downloaded latest driver version from official Samsung Vibrant page.
I have tried flashing from all possible USB ports on my PC & laptop wherever the phone was being recognized. But now with the latest official Samsung Vibrant drivers, my phone is not being detected by any USB port on my PC.
But whenever I have flashed, Odin is stuck at Cache or Modem or recently(with latest samsung drivers), DO NOT TURN OFF TARGET !!
I have even tried flashing through Heimdall 1.3.1 but the zadig.exe shows the device only as 'Gadget Serial' no matter how many times I try, and installs the driver with device as Gadget Serial under libusb in Device Manager and I also tried by updating driver as Samsung Composite USB as mentioned in readme. Either Way Heimdall frontend will not flash and says "Failed to detect compatible download-mode device".
Edit: I tried with another USB cable, of LG GS500v, and Oh Lord Jesus, Odin flashed past it. Great, time to buy a new Samsung USB cable, now!
PROBLEM SOLVED
Click to expand...
Click to collapse
Dont worry....this time go to download mode and flash eugenes that does not brick aka Eugene_2E_JK2_Froyo with the same pit file and ur good to go brother
Similar Problem but different results.
Hi!
Whomever can help me, please help me. Right now, I am on stock Froyo 2.2 after the factory reset so this is how I got it but it is rooted only. I am trying to overwrite CWM because I cannot get into its recovery no matter how many times I flash it. Odin just will not recognize my phone when I am in download mode. When my phone is on, it will allow the mass storage and that works but when in download mode, my PC says unrecognized devide. I have a feeling that is the problem and I have updated the drivers several times, especially from Samsung but to no avail. Does someone have a solution to this problem? I want to go to Avatar ROM with my phone which is Jelly Bean and have seen its possible but I feel CWM is holding me back.
Thank you in advance!
David Carlton
david.carlton.jr38 said:
Hi!
Whomever can help me, please help me. Right now, I am on stock Froyo 2.2 after the factory reset so this is how I got it but it is rooted only. I am trying to overwrite CWM because I cannot get into its recovery no matter how many times I flash it. Odin just will not recognize my phone when I am in download mode. When my phone is on, it will allow the mass storage and that works but when in download mode, my PC says unrecognized devide. I have a feeling that is the problem and I have updated the drivers several times, especially from Samsung but to no avail. Does someone have a solution to this problem? I want to go to Avatar ROM with my phone which is Jelly Bean and have seen its possible but I feel CWM is holding me back.
Thank you in advance!
David Carlton
Click to expand...
Click to collapse
Can you explain the steps your taking when you try to get into odin
Sent from my SGH-T959 using xda app-developers app
The steps I take is put the phone into download mode by pulling the battery and then holding both the volume up and down then reinsert the battery. It shows the download screen. I then start odin and I have tried version 1.7 and the latest version of 3.0.7. Then I plug my phone into the USB port and windows pops up saying unrecognized device. I have reinstalled drivers several times. Now to describe my desktop is that it is a pentium III 550 Mhz...and old computer and running Windows XP Professional. I am able to do the mass storage when the phone is on normally so it recognizes it that way though. I have tried different USB ports on it as well so just unsure. I have rooted the phone and have superuser app access. ROM manager was supposed to have flashed the recovery mode but it never goes into the CWR mode either and its version is 2.5.1.2 which I have seen work on these phones in videos on YouTube so guess I am trying a different route so I can play with the mods to find a ROM I like. I was going to try the Avatar ROM for the vibrant but just cannot seem to get to the point where I can get the ROM flashed. Any help would be greatly appreciated.
Keep the battery in and lull up Odin. Cut off the phone and hold both volumes while inserting USB hopefully the computer will then recognize it
Sent from my GT-I9000 using xda app-developers app
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Click to expand...
Click to collapse
Stay away from kies I will Brick your device as for the computer being old I don't know. I've never had this problem before. Sorry o couldn't help
Sent from my GT-I9000 using xda app-developers app
david.carlton.jr38 said:
Its still not recognizing it. I am almost consigned to wait until either my laptop is fixed or get a new laptop to replace it because this desktop is 13 years old and has the old USB 1.1 but wouldn't think that makes a difference. Any other ideas? I have uninstalled and reinstalled the USB drivers but I have not installed Kies yet but heard some bad things about that.
Click to expand...
Click to collapse
USB cable does make difference. And USB ports even on the same computer. Check also your phone's drivers. Finally, try out Heimdall one-click package for t959, it is more powerful and sensitive than Odin.
Good luck
ioancr said:
USB cable does make difference. And USB ports even on the same computer. Check also your phone's drivers. Finally, try out Heimdall one-click package for t959, it is more powerful and sensitive than Odin.
Good luck
Click to expand...
Click to collapse
Do you have the link to the Heimdall one-click package or do I just google it?
david.carlton.jr38 said:
Do you have the link to the Heimdall one-click package or do I just google it?
Click to expand...
Click to collapse
I found the link:
http://d-h.st/M93
on the Repository thread: http://forum.xda-developers.com/showthread.php?t=1875966
And since only thing remaining in your case is USB cable, I would say try with a different micro USB cable, even a different vendor's will do, as it did the trick for me( see the edit in OP)
I will try that. Thank you! I need to get a car charger anyway so I can get a usb adapter for the car and a usb cable and try it that way.
Sent from my SGH-T959 using xda app-developers app
david.carlton.jr38 said:
I will try that. Thank you! I need to get a car charger anyway so I can get a usb adapter for the car and a usb cable and try it that way.
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
For now, you can try any micro usb cable that fits, they all have same specifications.
Okay. Thanks!
Sent from my SGH-T959 using xda app-developers app
Stuck on cache
I'm also stuck on cache & I have tried more than one USB cable. Is there something else that I might be doing wrong? I'm completely uninclined technologically. The fact that I got my phone into download mode after 'bricking' is a feat in itself. Now what do I do when I'm stuck??
Mentalmama said:
I'm also stuck on cache & I have tried more than one USB cable. Is there something else that I might be doing wrong? I'm completely uninclined technologically. The fact that I got my phone into download mode after 'bricking' is a feat in itself. Now what do I do when I'm stuck??
Click to expand...
Click to collapse
Great that you could get it to the download mode.
Follow these steps:
1. Make sure that you have the correct drivers installed for your Operating System. Preferably, download the latest drivers. You can verify when your device is recognized when connected in download mode.
2. Make sure you follow this thread for Odin flashing http://forum.xda-developers.com/showthread.php?t=849028
3. If unable to flash using ODIN successfully, try with different USB ports, on same computer or a different one, say, a laptop.
4. If still unable to do so, try with different USB cables (any micro-usb should do).
In this way, you should by trying multiple alternatives at each step you should be able to eliminate the options and figure out what is really creating the problem in your flashing. Trust me my friend, this has not go anything to do with technology. just follow the steps, try alternatives and you would resolve this. Do post back on thread, if you have any queries.
Heres my issue, when I plug the usb cable in it doesnt connect to the PC. it tries to connect but then Windows say its disconnected. For kicks I went in to RSD and it connected and was able to flash back to stock, (I was on stock but just rooted). I am fully stock now and still have the same issue. Does anyone have any suggestions? I have tried multiple cables and 2 different PC's.
Thanks for any help!
Does the usb menu come up on the phone? Select storage device.
Reinstall the drivers from Moto.
Google usbdeview.exe un install all moto drivers reboot computer. Plug phone in let computer reload all the drivers.
http://www.nirsoft.net/utils/usb_devices_view.html
Sent from my MB855 using xda premium
rbeavers said:
Does the usb menu come up on the phone? Select storage device.
Reinstall the drivers from Moto.
Google usbview.exe un install all moto drivers reboot computer. Plug phone in let computer reload all the drivers.
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Hi, thanks for the info I tried uninstalling and when I plug the phone in it pops up USB Connection then goes away and PC say Device unplugged, but phone will charge. Wondering if the port is bad.
In the notifications at the top does it show the USB icon. Can you open it to see the options?
rbeavers said:
In the notifications at the top does it show the USB icon. Can you open it to see the options?
Click to expand...
Click to collapse
i too have similar problem the rsd flash process fails in remuneration with windows prompting usb malfunctioned
i request to give a solution
was able to root my phone using the steps described in the forums where the PC recognized the device with no problems every step of the way. however after getting root whenever I plug in the phone to a PC I no longer see it connected via Windows or via adb. I've tried rebooting both PC and phone, changing between MTP and PTP, as well as reinstalling the LG and adb driver, but no dice. Interestingly though I can use fastboot on the PC to update TWRP and boot TWRP, but nothing else. I feel like a setting somewhere might need to be changed, but it seems I've done everything I know of... any suggestions?
dimm0k said:
was able to root my phone using the steps described in the forums where the PC recognized the device with no problems every step of the way. however after getting root whenever I plug in the phone to a PC I no longer see it connected via Windows or via adb. I've tried rebooting both PC and phone, changing between MTP and PTP, as well as reinstalling the LG and adb driver, but no dice. Interestingly though I can use fastboot on the PC to update TWRP and boot TWRP, but nothing else. I feel like a setting somewhere might need to be changed, but it seems I've done everything I know of... any suggestions?
Click to expand...
Click to collapse
Re enable adb debugging on the phone settings.
Sent from my LG-H901 using XDA Premium HD app
cameljockey1 said:
Re enable adb debugging on the phone settings.
Sent from my LG-H901 using XDA Premium HD app
Click to expand...
Click to collapse
tried revoking USB debugging authorizations and toggling the USB debugging option... Windows now sees it in 'Device Manager', but I don't see any way to access it when I go to 'My Computer'! Also tried toggling between MTP and PTP, no luck...
dimm0k said:
tried revoking USB debugging authorizations and toggling the USB debugging option... Windows now sees it in 'Device Manager', but I don't see any way to access it when I go to 'My Computer'! Also tried toggling between MTP and PTP, no luck...
Click to expand...
Click to collapse
Unplug from computer. Disable usb debug adb. Connect in computer in different port and see if it installs anything. If so wait till done. Then unplug and enable adb and plug in same port from before.
Sent from my LG-H901 using XDA Premium HD app
cameljockey1 said:
Unplug from computer. Disable usb debug adb. Connect in computer in different port and see if it installs anything. If so wait till done. Then unplug and enable adb and plug in same port from before.
Sent from my LG-H901 using XDA Premium HD app
Click to expand...
Click to collapse
argh, no dice! everything you detailed happened, but still nothing listed in 'My Computer'!
dimm0k said:
argh, no dice! everything you detailed happened, but still nothing listed in 'My Computer'!
Click to expand...
Click to collapse
Try this have it unplugged. Turn off. Hook up to computer. Let it do its thing then turn on phone while plugged in
Sent from my LG-H901 using XDA Premium HD app
Device Manager
Do you see the phone in device manager when it is plugged in?
cameljockey1 said:
Try this have it unplugged. Turn off. Hook up to computer. Let it do its thing then turn on phone while plugged in
Sent from my LG-H901 using XDA Premium HD app
Click to expand...
Click to collapse
Tried this with no luck =(
bkgibby said:
Do you see the phone in device manager when it is plugged in?
Click to expand...
Click to collapse
yes, before creating this post it also showed in Device Manager, but it showed up with an exclamation saying the device could not be started. now it shows up as working properly, but no way to access it.
anyone have any other solutions/suggestions?
dimm0k said:
anyone have any other solutions/suggestions?
Click to expand...
Click to collapse
Try to unroot and see if it works.
sully9292 said:
Try to unroot and see if it works.
Click to expand...
Click to collapse
same error, i unroot this phone and works fine again debbuging...
---------- Post added at 10:17 PM ---------- Previous post was at 09:41 PM ----------
dimm0k said:
was able to root my phone using the steps described in the forums where the PC recognized the device with no problems every step of the way. however after getting root whenever I plug in the phone to a PC I no longer see it connected via Windows or via adb. I've tried rebooting both PC and phone, changing between MTP and PTP, as well as reinstalling the LG and adb driver, but no dice. Interestingly though I can use fastboot on the PC to update TWRP and boot TWRP, but nothing else. I feel like a setting somewhere might need to be changed, but it seems I've done everything I know of... any suggestions?
Click to expand...
Click to collapse
i fix this using this, download magisk16.zip and re-root using twrp, before that reboot phone and usb debbuing will come works again! if you use latest Magisk16.6 you lost again USB debbugging
Using Windows 10 x64 with drivers freshly installed
GT-I9001, Firmware 2.3, Factory reset performed and drivers unistalled/reinstalled
Been searching for hours on this and can't get it to work. Captivate will connect to computer normally and allow file transfers. But when I try to put in download mode, the computer won't recognize it. I get a popup window that says USB device not recognized.
I'm trying to restore back to complete stock because I'm having random shut downs and other misc issues. I was trying to us Odin to do it but it doesn't recognize the phone. So I powered up the phone, started Odin, then plugged the phone in...Odin sees the phone now but of course needs it in Download mode to work...so I get ADB and while the phone is connected, powered up, and recognized by Odin, I put it in download mode using "adb reboot download". The command put the phone into download mode but then Odin lost contact the the bubble appeared again saying it wasn't recognized.
I've completely removed all the samsung drivers, shut down computer, reinstalled all the drivers, shut down the computer, plugged the phone into the computer and watch to see that all drivers were installed correctly and the computer recognizes the phone...
So it all works EXCEPT while in download mode...any ideas?
I've tried different USB cords but don't have another computer to try on...
I would say you should try Samsung kies, let them install drivers. Then use download mode.
PalmCentro said:
I would say you should try Samsung kies, let them install drivers. Then use download mode.
Click to expand...
Click to collapse
i did, but doesn't work.
up...
Chouiyekh said:
up...
Click to expand...
Click to collapse
maybe the drivers aren't working.
Try downloading the driver from here
BatDroid said:
maybe the drivers aren't working.
Try downloading the driver from here
Click to expand...
Click to collapse
the link detected as a virus
Chouiyekh said:
the link detected as a virus
Click to expand...
Click to collapse
what?
its Androidmtk.com
BatDroid said:
what?
its Androidmtk.com
Click to expand...
Click to collapse
The link blocked by malwarebytes
BatDroid said:
what?
its Androidmtk.com
Click to expand...
Click to collapse
i've tried the driver from android mtk but also unhelpful
Chouiyekh said:
Using Windows 10 x64 with drivers freshly installed
GT-I9001, Firmware 2.3, Factory reset performed and drivers unistalled/reinstalled
Been searching for hours on this and can't get it to work. Captivate will connect to computer normally and allow file transfers. But when I try to put in download mode, the computer won't recognize it. I get a popup window that says USB device not recognized.
I'm trying to restore back to complete stock because I'm having random shut downs and other misc issues. I was trying to us Odin to do it but it doesn't recognize the phone. So I powered up the phone, started Odin, then plugged the phone in...Odin sees the phone now but of course needs it in Download mode to work...so I get ADB and while the phone is connected, powered up, and recognized by Odin, I put it in download mode using "adb reboot download". The command put the phone into download mode but then Odin lost contact the the bubble appeared again saying it wasn't recognized.
I've completely removed all the samsung drivers, shut down computer, reinstalled all the drivers, shut down the computer, plugged the phone into the computer and watch to see that all drivers were installed correctly and the computer recognizes the phone...
So it all works EXCEPT while in download mode...any ideas?
I've tried different USB cords but don't have another computer to try on...
Click to expand...
Click to collapse
Had the same problem spent hours trying to fix it, gave up and used windows 7
rpsweb said:
Had the same problem spent hours trying to fix it, gave up and used windows 7
Click to expand...
Click to collapse
do you mean using win7 you didn't get the problem, mean you solve it ?
Chouiyekh said:
do you mean using win7 you didn't get the problem, mean you solve it ?
Click to expand...
Click to collapse
I couldnt get the adb driver to work when in download mode, it was exclamated in device manager. So I used windows 7 instead worked fine, no this isn't the answer you want to hear but wasted hours trying to get it to work on windows 10
rpsweb said:
I couldnt get the adb driver to work when in download mode, it was exclamated in device manager. So I used windows 7 instead worked fine, no this isn't the answer you want to hear but wasted hours trying to get it to work on windows 10
Click to expand...
Click to collapse
thank you man i'll try with win 7, keep in touch
Chouiyekh said:
thank you man i'll try with win 7, keep in touch
Click to expand...
Click to collapse
I just read right clicking on the adb device in device manager when your phone is in download mode and choosing automatically update driver can fix the problem