Hi, I have installed the [ROM] Lenovo P780 Pre-rooted Official ROMs for Flash Tool with TWRP and now I do not find the "USB Debugging" option in the App option of System Settings. Instead appear a list of the applications installed where I can select any app change options.
This ROM comes configured to Root as default.
Saloiche said:
Hi, I have installed the [ROM] Lenovo P780 Pre-rooted Official ROMs for Flash Tool with TWRP and now I do not find the "USB Debugging" option in the App option of System Settings. Instead appear a list of the applications installed where I can select any app change options.
This ROM comes configured to Root as default.
Click to expand...
Click to collapse
I don't know if it is like other roms, but perhaps you may wanna try to go to the About phone and tapping 7 times on the "Build number" option to enable the Development settings menu.
rovama said:
I don't know if it is like other roms, but perhaps you may wanna try to go to the About phone and tapping 7 times on the "Build number" option to enable the Development settings menu.
Click to expand...
Click to collapse
You, sir... are a god!
Thanks!!
UranusHertz said:
You, sir... are a god!
Thanks!!
Click to expand...
Click to collapse
I'm glad that worked for you. I found that solution some time ago in this community
Thank you Rovama!. Works great.
Lenovo P780 USB driver
Saloiche said:
Thank you Rovama!. Works great.
Click to expand...
Click to collapse
Debugging is not working in my phone. I am not able to debug in my P780 as i could not find Driver "Lenovo P780". Do you have any idea about lenovo mobile usb drivers?
thank you very much it's really help me :laugh:
Hello,
i just flashed CarbonRom (from here: http://forum.xda-developers.com/showthread.php?t=2447870) KitKat 4.4.2
Did full wipe, installed GApps, everything works fine but USB Debugging is disabled.
I checked everything under Settings but I can't find any point under settings. Normally it's under security oder developer but neither are there.
Anyone has a idea?
Thanks for your help
Greetings
xfd123 said:
Hello,
i just flashed CarbonRom (from here: http://forum.xda-developers.com/showthread.php?t=2447870) KitKat 4.4.2
Did full wipe, installed GApps, everything works fine but USB Debugging is disabled.
I checked everything under Settings but I can't find any point under settings. Normally it's under security oder developer but neither are there.
Anyone has a idea?
Thanks for your help
Greetings
Click to expand...
Click to collapse
In settings>about>software information>build number
keep tapping that until it says u as developer
After that enable it from settings> developer options
thank you very much that solved the problem
Only thing that I can say is... LoL :laugh:
And thx of course
hello guys m using Huawei Mediapad 7 Youth but its USB debugging option is disabled
please please help me to enable it so i can root it
its showing all that options but m unable to enable it
You mean it's disabled in the "Developer options" menu? Have you enable "developer options" yet?
It's a little trickier than that.
You have to tap the "Build number" in about phone several times.
If you pay attention, there is a counter which flashes up telling you hou many more times you need to tap.
mru55 said:
It's a little trickier than that.
You have to tap the "Build number" in about phone several times.
If you pay attention, there is a counter which flashes up telling you hou many more times you need to tap.
Click to expand...
Click to collapse
i know about that
usb debugging options are already available but are "DISABLED" m unable to ENABLE it
guide me that one please
Developer options.
Slider to on.
Then check USB debugging.
If you lose debugging when you close the screen, then you have probably disabled it with some security / anti-theft software such as Avast.
I was pretty sure you did, hence my question. Correct me if I'm wrong but you are running a custom ROM, aren't you? So, you must have rooted the phone before. If this problem is happening with this ROM only, then it is probably a compatibility problem. Have you asked for help on the ROM's thread here on XDA? Perhaps the developer can help you. I wish I could help you further but I have never used that ROM.
Its custom rom installed with security they disabled usb debugging, please help me to enable or root it
Sorry, you have to talk to the custom ROM people.
mru55 said:
Sorry, you have to talk to the custom ROM people.
Click to expand...
Click to collapse
they wont allow
any other option to root?
l2adiant said:
they wont allow
any other option to root?
Click to expand...
Click to collapse
Try a root software that runs directly from you phone, not your pc. It is a long shot, but worth trying. Otherwise, I guess you should consider changing to a less restricted ROM.
Alexei Volkoff said:
Try a root software that runs directly from you phone, not your pc. It is a long shot, but worth trying. Otherwise, I guess you should consider changing to a less restricted ROM.
Click to expand...
Click to collapse
tell me which software to use???? any suggestion?
or tell me how to install custom recovery without usb debug ?
Factory reset, or download an official Huawei ROM and install following the instructions.
l2adiant said:
tell me which software to use???? any suggestion?
or tell me how to install custom recovery without usb debug ?
Click to expand...
Click to collapse
Sorry, I can't recommend any specific app because I have never tried one first hand. You should ask for the opinion of people who have used these apps, here on XDA. As for the second question, I'm afraid I can't help you either.
However, the best solution is to stick to official ROMs. There are so many apps to customize so many different aspects of official ROMs that I've never felt the need to install custom ROMs in any of my phones. Pursuing this path of trying to root a ROM which the original developer doesn't want to be rooted is just a bag of hurt. It's not worth the trouble, IMO.
Good luck
The Youth was sort of the successor of the original MP, which I have, and which was better.
I think it has a locked Bootloader, but there probably is a solution here on XDA to unlock and root it, and probably a custom recovery, but no custom roms.
I am looking to remove the Google account from a Samsung Galaxy Express 3 for AT&T. The phone has Marshmallow 6.0.1 . The FRP is on download mode. I already tried modem flash but the phone is still asking for the account. I also tried a couple bypass methods but the security patch does not allow any internet access. I also tried the universal RootJunky FRP Bypass method. I am stuck at after the Realterm makes the phone dialer pop up, the phone does not give me the "Scan Business Card" option to proceed with the bypass process. Any ideas guys?
SOLVED:
* (Also worked on the Galaxy On5 G550T / G550T1, Galaxy Sol SM-J321AZ, Galaxy J7 SM-J700T / J700T1)
Update, Hey guys, I found the solution for this problem. Here is the step by step proccess:
01. You need to download the "RealTerm" program and install it in your computer (Thanks Root Junky for the links) : http://rootjunkysdl.com/files/?dir=Apps/FRP.
02. Go to phone. You need to have a SIM in your phone for this process to work for the ORIGINAL CARRIER of the phone.
03. Go to your setup screen and connect to WIFI.
05. Using a USB cable, connect your phone to your computer. Make sure that your computer is reconizing your phone by instaling the last Samsung drivers available (http://www.samsung.com/us/support/downloads)
06. Once the phone is reconized by the computer and USB connected, we need to find out in what USB port your phone is connected to. To do that, you need to go you "Device Manager" in your computer. Click on "Modems". Then click on "SAMSUNG Mobile USB". On that screen, open the "Modem Tab". The first thing that you will find is: "PORT: COM09" (COM09 is in example, your phone could be connected to another port like COM41, COM39, and so on).
07. Now that we know our USB port number, open your RealTerm program. In the Realterm "Display" tab, make sure to check the "HALF DUPLEX" box.
08. Then, click on the "PORT" tab. Now, here we are going to enter the port number that our phone is without the COM in the Port box (For Example, COM43 = 43). The click on the "OPEN" button next to it.
09. Go to the "SEND" tab. In the first box, type the following command: at+creg?\r\n and click on "SEND NUMBERS"
10. Then, in the same box, type: atd1234;\r\n and also click "SEND NUMBERS". At this step, you need to look at the phone screen because the dealer is going to try to dial "1234". If not, keep sending the atd1234;\r\n commands.
11. When the dialer shows up, end the call and immediately click on the "MESSAGE" button. The phone is going to go to SMS to send a message to the "1234" number that the phone tried to dial. Send this 1234 number "YOUTUBE.COM" message. Send it. After the message is sent to this number, the words "Youtube.com" would became a blue internet link, click on it. The browser is going to go to Youtube. After you are in YouTube, click on the 3 dots at the upper right hand side of the screen. Click on "Settings", then click "About", then "GOOGLE Privacy Policy". the phone will ask you to choose an internet browser. Use the "Internet Browser"
12. When you are in the browser, again go to " http://rootjunkysdl.com/files/?dir=Apps/FRP " (Thanks Root Junky for the Links) and download "com.rootjunky.frpbypass-1.0.apk".
13. Then, go on Google.com and search for "Samsung App Store" : http://www.samsung.com/levant/apps/mobile/galaxyapps/ . Click on the "App Store" button. The Samsung is going to open and ask you to sign in. You would have to either create an account or use your existing Samsung account. Do not worry, you would get to remove it later.
14. Once you are at the Samsung account, search for "ES FILE Explorer" and install it in your phone. Once, it is installed, open the app. The app will allow you to go to the "Download" folder of your phone. There you will find the "com.rootjunky.frpbypass-1.0.apk" that you previously downloaded. Open and Install the "com.rootjunky.frpbypass-1.0.apk". The App will send you to the "Google Sign In" windows. DO NOT SING IN. Click on the three dots at the upper right hand side of the screen and click on "BROWSER SIGN IN". Then a new Google browser sign in screen will appear. Yes, you can Sign in there with your existing Google account (Again, do not worry, you can remove it later). Once you are signed in, you need to restart your phone.
15. Follow the setup instructions. The phone is not going to ask you for the Google account because you already entered.
16. Once at the home screen, click on 'Settings". Then go to "Accounts” and click on the "Samsung Account", click on "Remove Account". The phone is going to ask you for a confirmation to enter your password. Enter it and click on Remove. Go back and click on your "Google Account". Click on "Remove Account".
17. Go back to settings, and then click on "BACKUP AND RESET". Then click on "FACTORY DATA RESET". Then "RESET DEVICE". The phone will factory reset and the FRP will be removed.
DO NOT FORGET TO CLICK ON THE THANKS BUTTON
Here are the two full 4 files firmware repair version for the Samsung Galaxy Express 3 SM-J120A stock version:
J120AUCU1APC8 AT&T 6.0.1 Marshmallow
This is the most recent full 4 file firmware version:
J120AUCU2APJ2 AT&T 6.0.1 Marshmallow
PLEASE CLICK ON THE THANKS BUTTON IF THIS POST WAS HELPFULL
FRP bypass sm-j120a
What worked for me was; once you send the AT command for the dialer via RealTerm, instead of adding contact, tap "send message". Then attempt to send an SMS with a hyperlink. E.g. google,com, then tap the link and a jailed(restricted) browser will open. Search or navigate your way to samsung,com/levant/mobile/galaxyapps. Then use the drop menu on site to install ES File Explorer... then it's all downhill from there, the privileges on the device should be escalated enough to continue with the final steps in installing the FRP bypass APK from SD card or web. Let me know if you're still hung up or need clarification on any of that. It took me hours to finally get around the f**n frp. Lol
hi could u please walk me thru the steps from the beganning to bypass the gmail sign
x3appdev said:
What worked for me was; once you send the AT command for the dialer via RealTerm, instead of adding contact, tap "send message". Then attempt to send an SMS with a hyperlink. E.g. google,com, then tap the link and a jailed(restricted) browser will open. Search or navigate your way to samsung,com/levant/mobile/galaxyapps. Then use the drop menu on site to install ES File Explorer... then it's all downhill from there, the privileges on the device should be escalated enough to continue with the final steps in installing the FRP bypass APK from SD card or web. Let me know if you're still hung up or need clarification on any of that. It took me hours to finally get around the f**n frp. Lol
Click to expand...
Click to collapse
pleasehelp88888 said:
Click to expand...
Click to collapse
I updated the thread.
PLEASE DO NOT FORGET TO CLICK ON THE THANKS BUTTON
x3appdev said:
What worked for me was; once you send the AT command for the dialer via RealTerm, instead of adding contact, tap "send message". Then attempt to send an SMS with a hyperlink. E.g. google,com, then tap the link and a jailed(restricted) browser will open. Search or navigate your way to samsung,com/levant/mobile/galaxyapps. Then use the drop menu on site to install ES File Explorer... then it's all downhill from there, the privileges on the device should be escalated enough to continue with the final steps in installing the FRP bypass APK from SD card or web. Let me know if you're still hung up or need clarification on any of that. It took me hours to finally get around the f**n frp. Lol
Click to expand...
Click to collapse
Thank you for your help. I already had found the solution for this problem and never posted it. I already updated the thread. Thank you very much.
If you want to make it a little easier when you send a message, send a street address, then click it to open maps. At that point tap the mic button and you can open Internet to download the frpbypass file and you can just say "open my files" instead of downloading es file explorer.
Not working plz help
I keep getting an error after inputing the 2nd command into realterm
Falleninkedangel said:
I keep getting an error after inputing the 2nd command into realterm
Click to expand...
Click to collapse
Make sure you have your SIM card in the phone.
Do forget to click the thanks button.
I did this is so frustrating someone please help
I do have a similar card I tried 2 different ones and ran program as administrator I have successfully done this with two phones with this procedure but for some reason it's not working on my Express 3
Falleninkedangel said:
I do have a similar card I tried 2 different ones and ran program as administrator I have successfully done this with two phones with this procedure but for some reason it's not working on my Express 3
Click to expand...
Click to collapse
I would suggest you to make sure that you have a compatible SIM card in the phone so that it makes the call.
GalaxyVibe said:
I would suggest you to make sure that you have a compatible SIM card in the phone so that it makes the call.
Click to expand...
Click to collapse
Thank you for replying, so when you say compatible would that mean a sim from the company it was last activated on, or does it have to be an activated sim? One more question, why was I able to get the other phones to work just using an old sim, it wasn't an activated sim or from the carrier the phone was on!! Sorry for all the questions I just really want to figu this out, thanks again!!
Falleninkedangel said:
Thank you for replying, so when you say compatible would that mean a sim from the company it was last activated on, or does it have to be an activated sim? One more question, why was I able to get the other phones to work just using an old sim, it wasn't an activated sim or from the carrier the phone was on!! Sorry for all the questions I just really want to figu this out, thanks again!!
Click to expand...
Click to collapse
As long as the SIM card is from the original carrier of the phone, it should work even though it is activated or not. That is what worked for me. I hope that it work for you too.
hey
anyone got a firmware file i can flash with odin or other program to fix my phone its the Samsung Galaxy Express 3 SM-J120A did ota now wont boot says use emergency recovery fuction i got that software said phones not supported if someone has the stock rom thats odin flashable etc please help me and ty
madvane20 said:
anyone got a firmware file i can flash with odin or other program to fix my phone its the Samsung Galaxy Express 3 SM-J120A did ota now wont boot says use emergency recovery fuction i got that software said phones not supported if someone has the stock rom thats odin flashable etc please help me and ty
Click to expand...
Click to collapse
in the thread for rooting this device made by ashyx there is a link for stock firmware
madvane20 said:
anyone got a firmware file i can flash with odin or other program to fix my phone its the Samsung Galaxy Express 3 SM-J120A did ota now wont boot says use emergency recovery fuction i got that software said phones not supported if someone has the stock rom thats odin flashable etc please help me and ty
Click to expand...
Click to collapse
Here they are:
https://forum.xda-developers.com/showpost.php?p=68958014&postcount=2
PLEASE CLICK ON THE THANKS BUTTON IF THIS POST WAS HELPFULL
FRP J120A
x3appdev said:
What worked for me was; once you send the AT command for the dialer via RealTerm, instead of adding contact, tap "send message". Then attempt to send an SMS with a hyperlink. E.g. google,com, then tap the link and a jailed(restricted) browser will open. Search or navigate your way to samsung,com/levant/mobile/galaxyapps. Then use the drop menu on site to install ES File Explorer... then it's all downhill from there, the privileges on the device should be escalated enough to continue with the final steps in installing the FRP bypass APK from SD card or web. Let me know if you're still hung up or need clarification on any of that. It took me hours to finally get around the f**n frp. Lol
Click to expand...
Click to collapse
Keeps saying: Unable to send this message. Your device is not connected to a mobile network. Connect to a Wi-Fi network and try again. Any ideas?
Can't Bypass Google verification. Please HELP
I'm on J120AUCU2APJ2 AT&T 6.0.1 Marshmallow.
I tried this method, but can't get the dialer. Any help is appreciated. Thank in advance.
help
when I try to open frpbypass.apk it crashes. it installed alright but won't open. Any suggestions?? thanks in advance
---------- Post added at 10:10 PM ---------- Previous post was at 10:03 PM ----------
premsuni said:
Can't Bypass Google verification. Please HELP
I'm on J120AUCU2APJ2 AT&T 6.0.1 Marshmallow.
I tried this method, but can't get the dialer. Any help is appreciated. Thank in advance.
Click to expand...
Click to collapse
What worked for me was not clicking on "send numbers" but clicking on "send ASCII" after the at+creg/atd1234 commands.
Works perfect
For the Galaxy xpress 3, downgrade to 6.0.1 and do the process sending the ASCI not the number... :good:
Pulling what little hair I have left out here.
Trying to get into developer mode on my new chromebook.
Used to have HP14 which was no problem.
Have tried esc-refresh-power
esc-power
refresh-power
esc-refresh (you never know!!!!!!)
All I get is either a black screen or a normal boot.
Has anything happened with recent updates to change developer mode?
Thanks in advance
Still can't get into developer mode. Anybody got any ideas?
divvykev said:
Still can't get into developer mode. Anybody got any ideas?
Click to expand...
Click to collapse
I've put two Edgars into developer mode, so it's definitely possible. Try this:
https://wiki.archlinux.org/index.php/Acer_Chromebook_14_CB3-431_(Edgar)
kinggrowler said:
I've put two Edgars into developer mode, so it's definitely possible. Try this:
https://wiki.archlinux.org/index.php/Acer_Chromebook_14_CB3-431_(Edgar)
Click to expand...
Click to collapse
Thanks for that.
Was able to get into the startup screen once but had to cancel was needed to go out.
Can't get in again now. Keep getting a black screen. Ah well.
kinggrowler said:
I've put two Edgars into developer mode, so it's definitely possible. Try this:
https://wiki.archlinux.org/index.php/Acer_Chromebook_14_CB3-431_(Edgar)
Click to expand...
Click to collapse
Have you been able to activate the full debugging features? Whenever I go to enable them it says that it couldn't be fully enabled and I get a red X. I have access to ADB and Fastboot commands so developer options is on, but no root access.
ILoveLamp2234 said:
Have you been able to activate the full debugging features? Whenever I go to enable them it says that it couldn't be fully enabled and I get a red X. I have access to ADB and Fastboot commands so developer options is on, but no root access.
Click to expand...
Click to collapse
I was able to do so, and eventually installed GalliumOS on my EDGAR, after flashing the Legacy BIOS from MrChromebox. So it's definitely possible. Sorry, I can't help more as no longer have this chromebook.