[Q] infinite loop after flashed k900 - Lenovo K900

**** storm hapended!
I followed this
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
and..
the phone don't even want to start.. not even with vol up+power button. What can I do?

cgpa2.17 said:
**** storm hapended!
I followed this
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
and..
the phone don't even want to start.. not even with vol up+power button. What can I do?
Click to expand...
Click to collapse
use MFT

Related

[Q] Odin...noob question (solved!)

hi, i'm new to odin and i was hoping you guys can help me out.
1. is it absolutely necessary to use .pit file every time using odin or are there acceptions?
2. is it ok to use default .pit file from odin3 or use a specific .pit file for galaxy player?
edited:
so i couldn't wait and flashed using odin. i was eventually successful after 2 attempts (thankfully no bricks) and i think i learned a thing or two, so now i want to share my experience with those who are new to odin. and this was done on an international version btw.
1st attempt (failed)
firmware: eryigit rom 1.2 based on 2.3.6
odin3: checked: pit (using a pit file for 2.3.5), pda (eryigit extracted file), auto reboot, reset time, bootloader update
result: booted fine, however android process crash constantly, camera, gallery, music, video don't work, FCs
2nd attempt (success!)
firmware: eryigit rom 1.2
odin3: checked: no using pit file, pda (eryigit extracted file), auto reboot, reset time
result: great success!
make sure you have samsung drivers correctly installed on your computer
how to:
full wipe: go to recovery and do a factory reset
recovery mode: power down, hold volume UP and power button until samsung logo appears
download mode: power down, hold volume DOWN and power button until samsung logo appears
ghetto lagfix (eryigit's rom):
1. go to recovery mode
2. back up rom and reboot
3. plug in computer via usb to storage mode, find folder under clockworkmod/backup/xx.xx.xx with .rfs extensions, change .rfs to ext4
4. open nandorid.md5 with notepad, change .rfs to .ext4, exit and save
5. go back to recovery mode
6. restore the previously back up rom, reboot, finish!

[Q] How do i recover the lenovo a820

I tried to reset my phone but it rebooted in the middle of restoring. now when i power on my phone all i get is a green android and what looks like restoring but then the phone just reboots after 3 seconds. if i press power and volume+ /volume- to enter clockwork mod i just get the same thing as when i power on. it looks like the phone is restoring but it just reboots. is there any way i can recover my phone using meta mode or factory mode, as i can't enter recovery. thanks for any help. note: i have tried to recover by this method, without success.
1. Download Lenovo drivers, unzip the archive. Turn off the phone and remove battery. Open device manager and connect the phone to PC. Watch for new devices. It will be displayed as МТ65хх Preloader. You need to be quick, because it will dissapear in some second. Click on it with the right button and select update driver. Point the wizard to the driver folder, it will install the correct driver automatically.
If it doesn't work with removed battery you can try to power on the phone and turn on developer options in settings or enter meta mode – hold Volume Down and Power buttons. Then connect the phone to PC again.
2. Download and extract Recovery zip and Flash tools. Run Flash Tools, click on DL DA All With Check Sum, load the scatter file located in Recovery folder, uncheck Preloader and hit Download (F6). Remove battery from phone and connect it to PC. When done, a green circle will appear.
3. Enter recovery mode – hold Volume Up, Volume Down and Power buttons until you see the logo. Make a backup of your current system first. Install new zip.
OK... most imp thing can you boot in normal mode??? if yes you just need to install android recovery. if not then you have to flash stock ROM ... download it from here needrom .com/mobile/lenovo-a820-12/ (remove the space between .com n needrom ) . in case you you just have problems with recovery then select only recovery in so flash else select all options.
hit thanks if you find it valuable.
omkarfrozen said:
OK... most imp thing can you boot in normal mode??? if yes you just need to install android recovery. if not then you have to flash stock ROM ... download it from here needrom .com/mobile/lenovo-a820-12/ (remove the space between .com n needrom ) . in case you you just have problems with recovery then select only recovery in so flash else select all options.
hit thanks if you find it valuable.
Click to expand...
Click to collapse
i can't get the phone to connect without the battery, i can only get it in factory or meta mode and in these modes i can't flash any rom.
if you can go into factory mode den mobile's perfectly fine. you just need to flash stock ROM once.
1) switch off your phone
2) open the sp flash tool
3) you will see Scatter-Loading option click it and locate the scatter file (it is present in the ROM folder you downloaded)
4)now press download button
5)after pressing download button connect your phone via USB cable
it may take 5-10 mins n you are done... you don't need to turn your phone ON...
it has worked for me

[RECOVERY][Official][TWRP 3.0.0-0] Samsung Galaxy A8 - SM-A800I - Exynos

This is Old twrp . New recovery for a800i can be found here http://forum.xda-developers.com/sam...recovery-twrp-3-0-1-0-galaxy-a800i-f-t3350856
Official release of TWRP recovery for the SM-A800I, Exynos5433
1. You will need to download and install Odin on your PC.
2. Once you have Odin installed, download the proper .tar file for your device from the download link below.
3. Power off your device. Turn on your device using the proper key combo to get into download mode and plug usb cable
4. Use the AP button to browse to and select the tar file that you downloaded
5. Uncheck Auto-reboot and flash
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
Download link: https://dl.twrp.me/a8hplte/
Source: https://github.com/TeamWin/android_device_samsung_a8hplte
Recovery made by androidlover.
Flash this at your own risk. Make sure that you have stock firmware downloaded from SAMMOBILE in case of problems. This will trip knox counter. Last, no one here is responsible of what you do with your device. This recovery is meant for only samsung A800I with exynos chipset. Note on some android it is required to enable OEM unlocking when flashing. Go into Settings -> Developer Options -> OEM unlocking
thanx going to try soon thanx brother
Vivacity said:
This is Old twrp . New recovery for a800i can be found here http://forum.xda-developers.com/sam...recovery-twrp-3-0-1-0-galaxy-a800i-f-t3350856
Official release of TWRP recovery for the SM-A800I, Exynos5433
1. You will need to download and install Odin on your PC.
2. Once you have Odin installed, download the proper .tar file for your device from the download link below.
3. Power off your device. Turn on your device using the proper key combo to get into download mode and plug usb cable
4. Use the AP button to browse to and select the tar file that you downloaded
5. Uncheck Auto-reboot and flash
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
Download link: https://dl.twrp.me/a8hplte/
Source: https://github.com/TeamWin/android_device_samsung_a8hplte
Recovery made by androidlover.
Flash this at your own risk. Make sure that you have stock firmware downloaded from SAMMOBILE in case of problems. This will trip knox counter. Last, no one here is responsible of what you do with your device. This recovery is meant for only samsung A800I with exynos chipset. Note on some android it is required to enable OEM unlocking when flashing. Go into Settings -> Developer Options -> OEM unlocking
Click to expand...
Click to collapse
Hey brother did anyone have any Custom ROM for Galaxy A8 2015
Am having the same question.
Any nougat custom rom for our phone.
mumuni said:
Am having the same question.
Any nougat custom rom for our phone.
Click to expand...
Click to collapse
I don't think there are any custom ROM for this phone, as i have been desperately searching for them.

Samsung Galaxy j7 2016 help

So i wanted to change roms to stock and deleted the system stuff now the devices only displays the samsung galaxy j7 logo then its just a black screen.
i just want to get to recovery mode
someone help
Try this from my early post .
#Method 1
1. Install Smart Switch on your PC : https://www.samsung.com/global/download/smartswitchwin/
2. From rest fallow this video to follow easy : https://www.youtube.com/watch?v=9QhJngOuLQ4
#Method 2
1. Make Free account on sammobile.com
2. go here https://www.sammobile.com/firmwares/galaxy-j7-/SM-J710F/
check if is your model SM-J710F or another ...
put your region from where the phone you bought. Use lattest Version of OS
3. Extract (unzip) the firmware file to the desktop or what ever is easy for you to locate firmware
4. Download Odin v3.12.7 from here: https://dl.sammobile.com/Odin3-v3.12.7.zip
Extract Odin ZIP file
Open Odin v3.12.7
5. Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
If you are still not sure how to do , follow this video : https://www.youtube.com/watch?v=7SK3IMprKVQ

method for bricked Volume Size is too big J500FN :)

my english is not good so sorry
hello i see most thears with error Volume Size is too big..... or error hidden.img.ext4 fail! (size) is too big
i find methot for repair it
what u need
1. Odin i use 3.07
2. firmware 4 files AP, BL, CSC, CP and u must have PIT (J5NLTE_EUR_OPEN_HIDDEN_200MB)
now:
1. Run Odin
2. Add files
Bootloader = BL
PDA = AP
PHONE = CP
CSC = CSC
and ADD PIT
u must uncheck Auto reboot
U must select
1. RE partirion
2. Nand erase
3. F reset time.
now connect ur phone Via Download mode
Volume down + home + power+ next one click volume up
Odin found ur phone then u Click start and wait
after end odin give u blue screen RESET on odin, long hold power. Phone restart wait for phone go to recovery u on first screen see error then Press random keys vol + - and power don't hold u see stock recovery select factory reset and restart phone
i have this soft XEO Poland but im from Poland Android 6.0.1 no brand clear official from samsung
one Pack with all files what u need Rom Official Samsung Android 6.0.1 XEO Poland
Download
after this u can again flash TWRP and custom roms This method repair ur Partition on phone u can use this rom as stock what u want

Categories

Resources