Stock LG build KOT49I.V50020a KOREA
This thread is for the KOREAN version of V50020A, if you are looking for the official US or GB\EU builds they are located here:
[ROM][4.4.2][V500][Flashable] Stock LG build KOT49I.V50020b US + BusyBox + ROOT
[ROM][4.4.2][V500][Flashable] Stock LG V50020A\V50020B GB EU + BusyBox + ROOT
Disclaimer:
Use this at your own risk. I am not responsible for any damage or data loss encountered due whatever reason.
FLASH AT YOUR OWN RISK!
Downloads:
KDZ: V50020A_00-KOREA.zip
IOROOT25: ioroot25.zip
ABOOT + TWRP Install: V50020_aboot_twrp_v2.zip
Follow the Steps below to get V50020a + Root + TWRP Recovery
(Sorry for the super lazy and short instructions..I am planning on improving this process and adding more detail in the future.. but for now follow these steps until I have the time to make things easier)
STEP 1:
Flash KDZ using the Steps covered in this thread:
http://forum.xda-developers.com/showthread.php?t=2625044
STEP 2:
Root using IOROOT25.zip
http://forum.xda-developers.com/showpost.php?p=48709232&postcount=869
STEP 3:
Install loki-exploitable ABOOT and TWRP
Download and Extract: V50020_aboot_twrp_v2.zip
Run file: runme.bat
Thanks to
KDZ Source: http://derefer.me/?http://ruinses.tistory.com/175
@autoprime - for 4.4.2 root, @aicjofs for the heads up
@Drgravy - for TWRP for V500
Known Issues & Fixes:
Boot loop when booting into TWRP with USB is plugged in
Workaround: Unplug USB after device reboots. It should boot into Recovery without issue. Replug USB after TWRP has booted.
Click to expand...
Click to collapse
Any changelog? Thank you for the release ?
Inviato dal mio LG-V500 utilizzando Tapatalk
fabioculo2 said:
Any changelog? Thank you for the release ?
Inviato dal mio LG-V500 utilizzando Tapatalk
Click to expand...
Click to collapse
I haven't actually done anything but flash it to my device so far... not sure I will get time tonight to really mess with it.
It's Friday! Time to go out and party! :victory:
can I flash this in twrp?? or need use other method??
djcody said:
can I flash this in twrp?? or need use other method??
Click to expand...
Click to collapse
In OP:
How to Flash KDZ:
http://forum.xda-developers.com/show....php?t=2625044
Do you plan to build a zip like v50018a ?
ledabe974 said:
Do you plan to build a zip like v50018a ?
Click to expand...
Click to collapse
Yep, but doubt I'll get much done this weekend. Going to be out and about, and on the road for a bit.
Sent from my VS980 4G using Tapatalk
id10terror said:
Yep, but doubt I'll get much done this weekend.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
No problem,
I've install V50018a this week with @Jessooca build http://forum.xda-developers.com/showthread.php?t=2692505
This morning, go back stock with @Jessooca thread http://forum.xda-developers.com/showthread.php?t=2698401
All that to have TWRP working.
So I can wait a zip some day.
Thanks man.
id10terror said:
Yep, but doubt I'll get much done this weekend. Going to be out and about, and on the road for a bit.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
So with this version I lose root and recovery? Is it rootable and can I install twrp on it manually?
android404 said:
So with this version I lose root and recovery? Is it rootable and can I install twrp on it manually?
Click to expand...
Click to collapse
No with this version you will lose root and recovery. You'll need to wait for a zip version
Sent from my VS980 4G using Tapatalk
vhce said:
In OP:
How to Flash KDZ:
http://forum.xda-developers.com/show....php?t=2625044
Click to expand...
Click to collapse
Sounds like too much hassle. I'll just wait for a flashable zip.
that KDZ version is totally useless to mass
id10terror said:
No with this version you will lose root and recovery. You'll need to wait for a zip version
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Curiosity made me flash it anyways... Worked fine and to me it feels even smoother than the 18A version.
android404 said:
Curiosity made me flash it anyways... Worked fine and to me it feels even smoother than the 18A version.
Click to expand...
Click to collapse
Yea it's less buggy and really feels much smoother than 18a. You can always flash back to 4.2.2 if anything.
Sent from my VS980 4G using Tapatalk
android404 said:
Curiosity made me flash it anyways... Worked fine and to me it feels even smoother than the 18A version.
Click to expand...
Click to collapse
Yes, I was also curious. The instructions are a bit onerous, but clear. After installing it, the first thing I was glad to see is that it preserved my info (strange, since I clicked the clear phone data button), and stayed in English.
For those wondering, the Korean KK is real, and works fine. That said, since it seems other countries are receiving KK also (I read a forum saying it had rolled out in Spain already a day ago), I would suggest waiting, and here is why:
1) QVoice is in Korean. 100%.
2) Weather widget is powered by Kweather (not Accu) and is a bit buggy recognizing the cities. I live in Rio de Janeiro, which the 4.2.2 and even the leaked KK had no trouble recognizing. This one cannot find the city, and instead says I live in Sao Goncalo, which is somewhere else.
3) There are some local apps such as QTV, which is specialized to work with local Korean cable offerings. It is a remote control and TV guide, so no online streaming, and thus gives no advantage.
id10terror said:
Yea it's less buggy and really feels much smoother than 18a. You can always flash back to 4.2.2 if anything.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
I'm "on my way back" atm because I don't need a tablet without xprivacy, adaway, afwall and tb. Still, great to see how smooth it is.
i can still wait for a flashable eu/us V50020a zip while I'm on the road with the twrp/rooted leaked KOT49I.V50018a
best regards
btw AdAway and Xposed Modules works like a charm..
Hi! anyone can upload system dump?? I need this... and I can't extract system.img:/
18a version also will be ok
id10terror said:
No with this version you will lose root and recovery. You'll need to wait for a zip version
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Is there a ZIP Version planned / in the works?
Related
Have anyone get this update kot49i.d80220d ? Just connect my phone to pc and i get notification. I'm in Uk unbranded, phone used with Polish changed to English only for screenshot
Yes i got that update but cant install it as i am rooted. Also UK unbranded.
Brutos08 said:
Yes i got that update but cant install it as i am rooted. Also UK unbranded.
Click to expand...
Click to collapse
rooted is no problem if you have stock recovery
if you have twrp it will not work
I am also rooted but on stock recovery , updated the phone without problem , all data is keept
I am also on stock recovery i havent installed any recovery. It update fails and comes back saying suspected of rooting. Thats doing it OTA maybe should try the lg tool
Try go too download mode and then use lg software update tool. Its worked for me on stock recovery and rooted
Sent from my LG-D802 using XDA Premium 4 mobile app
Brutos08 said:
I am also on stock recovery i havent installed any recovery. It update fails and comes back saying suspected of rooting. Thats doing it OTA maybe should try the lg tool
Click to expand...
Click to collapse
yeah also used the lg tool because did not get notification for ota
and saw people saying there was update 20d with knock code
opened the lg support tool and immediately says there was a update
I have polish open and i have 802 20D. I have fully working knock code and no scraches on earphones. Open poland is the same as eur open so if someone need HERE is url from LG site. This is oficial kdz. Ioroot working fine. Maybe devs use this kdz for knock code source or base to modify to flashable with custom recovery ?
witek_77 said:
I have polish open and i have 802 20D. I have fully working knock code and no scraches on earphones. Open poland is the same as eur open so if someone need HERE is url from LG site. This is oficial kdz. Ioroot working fine. Maybe devs use this kdz for knock code source or base to modify to flashable with custom recovery ?
Click to expand...
Click to collapse
will i have my 4g still enabled?
Brutos08 said:
I am also on stock recovery i havent installed any recovery. It update fails and comes back saying suspected of rooting. Thats doing it OTA maybe should try the lg tool
Click to expand...
Click to collapse
Look for offline procedure update with LG mobile tool. Download the full 80220D KDZ file and flash it. I did it and remained with all apps and data. You have To re root but that's easy.
Sent from my LG-D802 using Tapatalk
Flashable rooted Open Euro 20D with recovery and knock code
Hello ,
For people with custom recovery ...
Try the link in my signature.
This flashable zip works as an update , and keeps root and recovery.
It's made from the latest Open Euro 20D kdz
Just downloading it just now through the pc suite, anyone know what changes, if any, we can expect?
how's about battery ?
lucky92 said:
how's about battery ?
Click to expand...
Click to collapse
Battery is great. Bluetooth is a no show in the stats. That's what i can say about after almost 24hr after hard reset that i performed.
Strange thing tho is that whatsapp was messed up and i have another full year. It thinks that it is a new phone :laugh:
tholudee said:
will i have my 4g still enabled?
Click to expand...
Click to collapse
Yep, 4G works great. Also it works on my 32GBs version of phone.
GranFlash said:
Yep, 4G works great. Also it works on my 32GBs version of phone.
Click to expand...
Click to collapse
thanks that means it should work on mine ame xx version
tholudee said:
thanks that means it should work on mine ame xx version
Click to expand...
Click to collapse
It doesn't matter AME, SEA or other. D802 is D802 and all firmwares for that prefix will run propertly. You have to only watch out for capability of phone storage. This one firmware works with 32GB perfectly.
Sent from my LG-D802 using XDA Free mobile app
Does this D802 20D have the "Hide Front Touch Buttons" functionality?
Does this update contained art option?
superandroid2011 said:
Does this D802 20D have the "Hide Front Touch Buttons" functionality?
Click to expand...
Click to collapse
oscar mok said:
Does this update contained art option?
Click to expand...
Click to collapse
No on both counts.
Brutos08 said:
I am also on stock recovery i havent installed any recovery. It update fails and comes back saying suspected of rooting. Thats doing it OTA maybe should try the lg tool
Click to expand...
Click to collapse
Was able to do the OTA update without problems. Root still there after update.
Tired of seeing the new update notification. Looking at upgrading my phone. Unfortunately, I don't install ROMs all the time, so I tend to forget the steps / applications needed to upgrade. I'm rooted, and bootloader is unlocked.
Can anyone help?
Take a screenshot of current t about phone under settings so we know which version you are running
http://forum.xda-developers.com/showthread.php?t=3487757
demkantor said:
Take a screenshot of current t about phone under settings so we know which version you are running
Click to expand...
Click to collapse
Hardware: LG-H901
Software: H90120e
Double0EK said:
http://forum.xda-developers.com/showthread.php?t=3487757
Click to expand...
Click to collapse
Thank you, I'll check it out.
Is the new update rootable?
dinggus said:
Hardware: LG-H901
Software: H90120e
Thank you, I'll check it out.
Is the new update rootable?
Click to expand...
Click to collapse
So there are now two newer versions out there, the latest only has an OTA no kdz, and if you flash it as is you will loose root
I suggest wait until there is a method to keep root and flash the latest, which I'm sure will be soon
demkantor said:
So there are now two newer versions out there, the latest only has an OTA no kdz, and if you flash it as is you will loose root
I suggest wait until there is a method to keep root and flash the latest, which I'm sure will be soon
Click to expand...
Click to collapse
Okay, thank you. I have the "j" version downloaded. The new one is "l" correct?
Last time I tried updating to the "j" version, LG Up wouldn't recognize my phone.
dinggus said:
Okay, thank you. I have the "j" version downloaded. The new one is "l" correct?
Last time I tried updating to the "j" version, LG Up wouldn't recognize my phone.
Click to expand...
Click to collapse
L is the latest, if you want to flash j right now feel free
There are two Roms by eliminater74 and one by andy_zahng
For any of these choice you do not need LGup, so long as you are previously rooted
Just flash firmware (part one) via TWRP
Then flash any of those three Roms via TWRP
Reboot,
You will have j rooted
But being i tend to recommend a full wipe i would say wait until the latest L is out in a flashable .zip, should be soon
demkantor said:
L is the latest, if you want to flash j right now feel free
There are two Roms by eliminater74 and one by andy_zahng
For any of these choice you do not need LGup, so long as you are previously rooted
Just flash firmware (part one) via TWRP
Then flash any of those three Roms via TWRP
Reboot,
You will have j rooted
But being i tend to recommend a full wipe i would say wait until the latest L is out in a flashable .zip, should be soon
Click to expand...
Click to collapse
Thank you. I'm rooted and using stock ROM right now. What ROM do you use?
As I an no longer maintaining this thread, it is now deprecated.
Fortunately for Potter users, NZedPred has taken over.
The new thread can be found here:
https://forum.xda-developers.com/g5-plus/development/twrp-flashable-stock-builds-t3813351
Cheers
This is amazing, I was looking for flashable stocks ROMs because for now I don't have access to my PC. I will download and try the LA version.
this is awesome
Q9Nap said:
The only modifications from stock are that dm-verity and force encryption have been disabled in the boot images, and unlocked device/dm-verity warnings have been disabled in the logo images.
Click to expand...
Click to collapse
Thank you! Good job!
However, please advise this in red.
And perhaps you want also to add a link to an untouched stock. It's great to have the originals of boot.img and logo.img.
:good:
After Flashing Rom It Will Relock Bootloader ?
Using the the xt1687 is there a particular one I should use? I'm not up to date on all the stock firmware lol. I appreciate you posting these up
---------- Post added at 02:32 PM ---------- Previous post was at 02:28 PM ----------
_Official_KB_ said:
After Flashing Rom It Will Relock Bootloader ?
Click to expand...
Click to collapse
No
I have downloaded the eu full version twice now and both times when trying to open the zip I get invalid argument error?
Thank you so much you absolute legend these are super convenient!!
Great!!!
What is the LA one?
joshk89 said:
Using the the xt1687 is there a particular one I should use? I'm not up to date on all the stock firmware lol. I appreciate you posting these up
Click to expand...
Click to collapse
What is your current build?
NPN25.137-43-5 is an update from NPN25.137-35, and is for Verizon.
NPN25.137-67 is an update from NPN25.137-15, and is for Latin America.
NPNS25.137-33-11 is an update from NPNS25.137-33-5, and is for Europe.
skooter32 said:
I have downloaded the eu full version twice now and both times when trying to open the zip I get invalid argument error?
Click to expand...
Click to collapse
I just downloaded the EU build and it worked with no issues.
I've added sha-1 values for the full builds to enable file verification.
carnivalrejectq said:
What is the LA one?
Click to expand...
Click to collapse
LA = Latin America
What build do you install for the us variant? I'm super confused
Q9Nap said:
What is your current build?
NPN25.137-43-5 is an update from NPN25.137-35, and is for Verizon.
NPN25.137-67 is an update from NPN25.137-15, and is for Latin America.
NPNS25.137-33-11 is an update from NPNS25.137-33-5, and is for Europe.
Click to expand...
Click to collapse
I'm really not sure but 137-35 looks familiar. I'm not on stock right now but i use the stock DEODEXED rom when I feel like stock. Is the 43-5 update the most recent one to that? I use sprint but I feel like that doesn't matter since it's carrier unlocked
Can u just use the Verizon build for the rest of the US? (METRO)
zeft64 said:
What build do you install for the us variant? I'm super confused
Click to expand...
Click to collapse
The only U.S. OTA currently is the VZW one.
Any of the builds will likely work fine.
joshk89 said:
I'm really not sure but 137-35 looks familiar. I'm not on stock right now but i use the stock DEODEXED rom when I feel like stock. Is the 43-5 update the most recent one to that? I use sprint but I feel like that doesn't matter since it's carrier unlocked
Click to expand...
Click to collapse
Without specific information, I can't really help you.
As you say though, the device is carrier unlocked, so any build will likely work fine.
carnivalrejectq said:
Can u just use the Verizon build for the rest of the US? (METRO)
Click to expand...
Click to collapse
Probably; feel free to try it and report back.
Q9Nap said:
The only U.S. OTA currently is the VZW one.
Any of the builds will likely work fine.
Without specific information, I can't really help you.
As you say though, the device is carrier unlocked, so any build will likely work fine.
Probably; feel free to try it and report back.
Click to expand...
Click to collapse
I'll try it out tonight. Thanks for the feedback
I flashed the Verizon one. The reason I asked my previous question is because Volte/WiFi Calling is important to me because I get LTE signal just fine in my area but no 3G/HSPA so I rely on those two for phone calls at home. Volte and WiFi calling are working good. Thanks for the upload.
Since this is the stock ROM would dirty flashing as a update work okay?
EDIT: Nevermind, I used my eyes and read the OP.
EDIT 2: Successfully flashed. You the man! Been waiting to get this VOLTE fix. Big thanks :good:
bvsbutthd101 said:
Since this is the stock ROM would dirty flashing as a update work okay?
EDIT: Nevermind, I used my eyes and read the OP.
EDIT 2: Successfully flashed. You the man! Been waiting to get this VOLTE fix. Big thanks :good:
Click to expand...
Click to collapse
Hey bro what variant do you have and what build did you use?
zeft64 said:
Hey bro what variant do you have and what build did you use?
Click to expand...
Click to collapse
US model 4gb. Bought it from amazon, non amazon version obviously since I flashed this. I used the VZW build since I'm on Verizon.
Close thread
Is there one for the S7 Active?
ThunderingLight said:
Is there one for the S7 Active?
Click to expand...
Click to collapse
Hasn't been found yet
Ok can you update the post once it has been found?
So, anyone flash this yet? I'm tempted but won't be back home to a PC (in case something goes wrong) until tonight. Just looking for some general impressions.
So, I did this. Pretty impressed with the overall device feel now, SE9 is nice . No hang ups other thank it took a long friggin' time, also remember this will WIPE all the data, so make sure to do a backup prior to. The initial/first phone setup is very iPhone-ish, imo.
bobloblaw1 said:
So, anyone flash this yet? I'm tempted but won't be back home to a PC (in case something goes wrong) until tonight. Just looking for some general impressions.
Click to expand...
Click to collapse
Be warned; this update is ONLY for SM-G930A firmware - it has a second-stage updater that blocks all other versions (including SM-G930T, which I myself tried). In other words, it is a carrier-specific update, folks.
PGHammer said:
Be warned; this update is ONLY for SM-G930A firmware - it has a second-stage updater that blocks all other versions (including SM-G930T, which I myself tried). In other words, it is a carrier-specific update, folks.
Click to expand...
Click to collapse
Will it work for sm-g930u at&t ????
mhdsweidan said:
Will it work for sm-g930u at&t ????
Click to expand...
Click to collapse
HIGHLY doubtful - not with a specific firmware check in place.
mhdsweidan said:
Will it work for sm-g930u at&t ????
Click to expand...
Click to collapse
You could try flashing G930A firmware in Odin and updating that way.
(Not sure it'll work though)
Sent from my SM-G955U using Tapatalk
If switching from u firmware back to att ql1 what version is capable of flashing att haven't been on carrier firmware since mm , wanna try Oreo
miko12312 said:
If switching from u firmware back to att ql1 what version is capable of flashing att haven't been on carrier firmware since mm , wanna try Oreo
Click to expand...
Click to collapse
What's your bootloader version? (5th from last letter in build number)
Sent from my SM-G955U using Tapatalk
FatalONEM8 said:
You could try flashing G930A firmware in Odin and updating that way.
(Not sure it'll work though)
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
If it weren't for this being a daily driver, I'd consider it. However, because it is, that's not an option. So I'll have to wait for either a neutral version or one that will work with the SM-G930T.
I am currently testing it out, I was on the latest U firmware and downloaded the latest ATT firmware, will update on how it goes
**EDIT
I am getting a model mismatch trying to flash G930AUCS4BRA1 (full odin file) on to a G930UUES4BRA1 firmware
micallan_17 said:
I am currently testing it out, I was on the latest U firmware and downloaded the latest ATT firmware, will update on how it goes
**EDIT
I am getting a model mismatch trying to flash G930AUCS4BRA1 (full odin file) on to a G930UUES4BRA1 firmware
Click to expand...
Click to collapse
Try using PrinceComsy Odin
Sent from my SM-G955U using Tapatalk
oreo otas
Goodnight friends, I started to update my phone to version 8.0 but it has more than 30 min in the option of patchin system files is normal or my step to better life is my s7.
Excuse me for my English since it is not my native language.
spend the fright of my life but finally install now approve to see how it works on android 8.0
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Has anyone been able to successfully downgrade back to RA1 after sideloading 8.0?
chewis559 said:
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Click to expand...
Click to collapse
Just reboot in recovery mode and wipe cache
chewis559 said:
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Click to expand...
Click to collapse
I had the same issue. The recommendation of rebooting into recovery and wiping Cache works.
:good:
I snoozed the notification then realized I should probably let someone know.
Currently can't install it because I have TWRP installed.
https://forums.androidcentral.com/l...are-update-us99721c-unlocked-us997-lg-g6.html
This guy got it as well.
Thanks for posting. I hope some kind soul does what was done for the 21b stock ROM, and makes a twrp installable zip for those of use who don't know how to convert a kdz.
I'm willing to throw 30 dollars towards someone that does it. I'm sure a few more folks will add to it.
aNGERY said:
I'm willing to throw 30 dollars towards someone that does it. I'm sure a few more folks will add to it.
Click to expand...
Click to collapse
Put me down for 5.
Anyone know where this is stored on the phone so I can delete it and free up .8GB?
bump... if i am able to somehow get the KDZ could someone make it a zip for me?
Can't you update with lgup without wiping end then flash twrp again?
blackhawk_LA said:
Can't you update with lgup without wiping end then flash twrp again?
Click to expand...
Click to collapse
I don't think so for this update. I haven't seen the kdz anywhere. Personally, I went to unrooted stock using an older kdz and LGUP (with Uppercut) and then immediately got the OTA.
i guess nobody is interested in it?
The 21c kdz firmware has been posted online:
https://lg-firmwares.com/lg-us997-firmwares/firmwares/
midtempo said:
The 21c kdz firmware has been posted online:
https://lg-firmwares.com/lg-us997-firmwares/firmwares/
Click to expand...
Click to collapse
yup and for those that do not know that can be used on any US997 model i'm running the us997 USA version with UCL KDZ
how can i flash this without changing my recovery? i'd like to flash in TWRP if someone would convert it. I will donate.
alright so we have the zip now, thanks to @zefie
i flashed the zip in TWRP, rebooted to system.
rebooted to bootloader and reflashed TWRP
rebooted to recovery
installed zefie's oreo anti root removal tool, then magisk.
rebooted to system.
runs great so far.
he wants me to give it a few days before he releases it into the wild.
aNGERY said:
he wants me to give it a few days before he releases it into the wild.
Click to expand...
Click to collapse
If you feel its safe, feel free to release it now. Otherwise feel free to wait.
It is your release bro
aNGERY said:
alright so we have the zip now, thanks to @zefie
i flashed the zip in TWRP, rebooted to system.
rebooted to bootloader and reflashed TWRP
rebooted to recovery
installed zefie's oreo anti root removal tool, then magisk.
rebooted to system.
runs great so far
he wants me to give it a few days before he releases it into the wild.
Click to expand...
Click to collapse
And........how is it running?
Thanks
Tool Belt said:
And........how is it running?
Thanks
Click to expand...
Click to collapse
It's pretty perfect. Gonna post some links in a new thread.
aNGERY said:
It's pretty perfect. Gonna post some links in a new thread.
Click to expand...
Click to collapse
Excellent, once I get it on my phone let me know to whom I owe my promised $5.00