Stock Kitkat Rom..Life is Better Now - AT&T LG Optimus G

Hurrah..
As I promised, Take this goodie from me. Another Stock Kitkat. This is based on F180L firmware.
This is only flashable via Philz Recovery. No other recovery is supported as of now.
Statutory Warning: It is your phone. Do not blame me for anything. I am not responsible for any harm you do to your device.
Most things are fixed. It includes Stock music app, Stock boot animation from LG(I really like this!). Integrated vu talk with the contacts app. Knock Off support, Three finger Slide, OSP and many more things you will just love,
This is just a test version, so some things do not work!
1st when you install the rom, the1st screen greets you with English, suddenly this changes to Korean(it might be other also). Again change to English in the same page. Then it fixes to English.
2nd Root does not work. You have to flash SuperSu
3rd MTP SD card is not working. means when connected to computer, the SD is showing as blank. Media scanner is also failing. Will see this soon.
4th, 5th, 6th you report...
Now the detailed steps:
1. Flash Philz recovery
2. Flash Stock KK Thanks to @Level99 for the hosting.
3. Flash SuperSu
4. Enjoy and report bugs!
Below is the version 2, the deodexed rom with lots of goodies from lg g3.
Deodexed Stock Kitkat
Flash this for SD Card fix Thanks to @knight4frat
Hit thanks if this has helped you :good:
This is just a request, if you like my works, Please donate to upgrade my network.

Reserved for future use
md5 value of the ROM:
c4d9379c191f964394b8592da930e53d

thanks for your work man, just one question Is there all network mode available to set & after set it th tethering & network menu - mobile network option is working or FC's?

dr.nakum said:
thanks for your work man, just one question Is there all network mode available to set & after set it th tethering & network menu - mobile network option is working or FC's?
Click to expand...
Click to collapse
Working w/o FCs as demonstrated in the video!

Nice!!!!
Downloading now, will report my experience tomorrow when i flash it, unfortunately my dsl connection is only 2mb/0.5mb at home, and i already went over my data cap for my cellphone. But thank you so much for your work. :good::good:
One small suggestion @gourab4u can you put the md5 check-sum of the file, that way i and others can check if the ROM is downloaded correctly before flashing, and thank you again!

Link Temporally Disabled!!!
:crying: When i was downloading it failed and when i went to try to download again, i saw the cause, link temporally down due to high traffic :crying: Oh Well!! Guess I'll have to wait a couple hours to try again.

DarkboyR said:
:crying: When i was downloading it failed and when i went to try to download again, i saw the cause, link temporally down due to high traffic :crying: Oh Well!! Guess I'll have to wait a couple hours to try again.
Click to expand...
Click to collapse
Working for me. Can you try again?

DarkboyR said:
Downloading now, will report my experience tomorrow when i flash it, unfortunately my dsl connection is only 2mb/0.5mb at home, and i already went over my data cap for my cellphone. But thank you so much for your work. :good::good:
One small suggestion @gourab4u can you put the md5 check-sum of the file, that way i and others can check if the ROM is downloaded correctly before flashing, and thank you again!
Click to expand...
Click to collapse
updated the md5 value in the second post

Led light working? Is this the same as paulicat's rom? Whats the difference?
Sent from my LG Optimus G using Tapatalk

gourab4u said:
Working for me. Can you try again?
Click to expand...
Click to collapse
Still not working for me, maybe for you it works because you're the owner of the account.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

DarkboyR said:
Still not working for me, maybe for you it works because you're the owner of the account.
View attachment 2795474
Click to expand...
Click to collapse
got an email that link is suspended due to high traffic. Anyone who has downloaded can you please mirror? My connection sucks

gourab4u said:
got an email that link is suspended due to high traffic. Anyone who has downloaded can you please mirror? My connection sucks
Click to expand...
Click to collapse
Did u face any problem with WiFi ? i tried porting the ROM and WiFi wasn't working ... even Logs were not helping in figuring out the things
EDIT : For getting pics , music in gallery & music player from external SD , download app "SD Scanner" From Market ,
Open it & change the path to scan from "storage/emulated/sdcard0" to "storage/sdcard1"
Let the scan complete .. u'll be able to see all the stuff from External SD & also some stuff will be accessible in computer
via MTP Mode ...

sam_0829 said:
Did u face any problem with WiFi ? i tried porting the ROM and WiFi wasn't working ... even Logs were not helping in figuring out the things
EDIT : For getting pics , music in gallery & music player from external SD , download app "SD Scanner" From Market ,
Open it & change the path to scan from "storage/emulated/sdcard0" to "storage/sdcard1"
Let the scan complete .. u'll be able to see all the stuff from External SD & also some stuff will be accessible in computer
via MTP Mode ...
Click to expand...
Click to collapse
Thanks.. This I know, but will like to implement this out of the box..and regarding wifi issue, the logcat helped me. A library file is responsible for that. it is libusim_aka.so

gourab4u said:
got an email that link is suspended due to high traffic. Anyone who has downloaded can you please mirror? My connection sucks
Click to expand...
Click to collapse
Once the link is unsuspended, I will grab it and host a mirror for you.
Sent from my LG-F180K using XDA Premium 4 mobile app

gourab4u said:
Thanks.. This I know, but will like to implement this out of the box..and regarding wifi issue, the logcat helped me. A library file is responsible for that. it is libusim_aka.so
Click to expand...
Click to collapse
it worked .. thanks ... btw my laptop shows the device hardly in MTP Mode... does the same happens with u ? may be because of windows 8.

Level99 said:
Once the link is unsuspended, I will grab it and host a mirror for you.
Sent from my LG-F180K using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank You. If I were to upload again, then I would probably go mad!!
Do you have any idea, when the link will be active again?

sam_0829 said:
it worked .. thanks ... btw my laptop shows the device hardly in MTP Mode... does the same happens with u ? may be because of windows 8.
Click to expand...
Click to collapse
You can try my rom, once it gets mirrored. No problem like that in my rom. I too use Windows 8.1

gourab4u said:
Thank You. If I were to upload again, then I would probably go mad!!
Do you have any idea, when the link will be active again?
Click to expand...
Click to collapse
i think it will take 3 days to active the link

dr.nakum said:
i think it will take 3 days to active the link
Click to expand...
Click to collapse
3days!
Can you tell me a better place for uploading? I do not have Android file host developer account!

Difference between this and Paulicat's ROM is...?

Related

Checkbox Icons for EnergyRom (3/10 build) show up as SRS icon

Hi, couldn't post this in development, forum wouldn't allow it. In any case, I have Energy rom installed for my Amaze, the new 3/10 version, and since I first installed this rom a month or so ago, the checkbox icons throughout the OS show up as the SRS Enhancement icon. No reason why, but I've posted a picture to show what I'm referring to.
I was wondering if there was a way to fix this. I've wiped and reinstalled, and still get the same result. I've also flashed the correct kernel, so I don't think that's the issue.
Any suggestions or solutions would be appreciated. Thanks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
krazygreen said:
Hi, couldn't post this in development, forum wouldn't allow it. In any case, I have Energy rom installed for my Amaze, the new 3/10 version, and since I first installed this rom a month or so ago, the checkbox icons throughout the OS show up as the SRS Enhancement icon. No reason why, but I've posted a picture to show what I'm referring to.
I was wondering if there was a way to fix this. I've wiped and reinstalled, and still get the same result. I've also flashed the correct kernel, so I don't think that's the issue.
Any suggestions or solutions would be appreciated. Thanks.
Click to expand...
Click to collapse
Did you reg wipe or super wipe, Id try super wipe, if you dont have the zip ask Srtx. She? always post one =D
Ps please correct me if im wrong on your gender i legitemently cant tell from your pic
i have a problem posting to the development section as well,its because we dont have enough posts.. i cant even get the download link to work for energy rom 3.1.12 since it was released...... can someone please help me with this....
elwaxman said:
i have a problem posting to the development section as well,its because we dont have enough posts.. i cant even get the download link to work for energy rom 3.1.12 since it was released...... can someone please help me with this....
Click to expand...
Click to collapse
You might want to start a thread General, yes you can't post in dev because you need a total of 10 post to do so.
elwaxman said:
i have a problem posting to the development section as well,its because we dont have enough posts.. i cant even get the download link to work for energy rom 3.1.12 since it was released...... can someone please help me with this....
Click to expand...
Click to collapse
You tried downloading it from here? It's the DL link from post 3.
yes i get a server not found page, this is so weird. nobody else is having this issue...
elwaxman said:
yes i get a server not found page, this is so weird. nobody else is having this issue...
Click to expand...
Click to collapse
That site might be blocked from your location, here's the direct link to the zip see if that works, otherwise I can pop a quick temporary mirror for you.
the link still doesn't work for me, if you could send me a temp mirror link i would really appreciate it... Thanks
Got the link to work somehow....
elwaxman said:
the link still doesn't work for me, if you could send me a temp mirror link i would really appreciate it... Thanks
Click to expand...
Click to collapse
My download says an hour then I'll have to upload it so it will likely be tomorrow, but I'll PM you with the link.
Look, you're post count's going up
krazygreen said:
Hi, couldn't post this in development, forum wouldn't allow it. In any case, I have Energy rom installed for my Amaze, the new 3/10 version, and since I first installed this rom a month or so ago, the checkbox icons throughout the OS show up as the SRS Enhancement icon. No reason why, but I've posted a picture to show what I'm referring to.
I was wondering if there was a way to fix this. I've wiped and reinstalled, and still get the same result. I've also flashed the correct kernel, so I don't think that's the issue.
Any suggestions or solutions would be appreciated. Thanks.
Click to expand...
Click to collapse
Sorry we derailed your thread there. Hopefully someone can help you get this fixed.
Edit: I read this wrong -_- i see the problem
But just use a theme that uses boxes completely, like the ICS theme or the Energy theme out there
If you have a skin other than the one that comes with the Rom, this might happen
Sent from my HTC_Amaze_4G using Xparent Green Tapatalk
Here is mine, the bars are disorted, I have an ics skin not a theme
Sent from my HTC_Amaze_4G using Xparent Green Tapatalk
Thanks for the help everyone. Just a question, how would I install a theme on top of the rom? I have the rom installed without any theme's. Is there a specific way to get a theme setup on top of the rom?
Thanks.
krazygreen said:
Thanks for the help everyone. Just a question, how would I install a theme on top of the rom? I have the rom installed without any theme's. Is there a specific way to get a theme setup on top of the rom?
Thanks.
Click to expand...
Click to collapse
I use this one personally. Apaquette420 has a sweet theme also. You can find them in the Amaze's themes and apps forum
http://forum.xda-developers.com/showthread.php?t=1542253
3/11 ICS Theme for All Sense 3.0 Roms/ Stock rom
Sent from my HTC_Amaze_4G using xda premium
glacierguy said:
I use this one personally. Apaquette420 has a sweet theme also. You can find them in the Amaze's themes and apps forum
http://forum.xda-developers.com/showthread.php?t=1542253
3/11 ICS Theme for All Sense 3.0 Roms/ Stock rom
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
That's a gorgeous theme. Super helpful, thanks, I'm in the process of installing it now. I wanna see if it makes a difference towards the checkbox icons.
Edit: The checkbox icon has been fixed with this theme! Thanks a ton!

[MOD] XSP Settings MOD for 2.245 Firmware

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
V1
Initial Release (no new versions will be released of this MOD as I'm too busy and wont be able to work on anything though, if anyone wana use it and upgrade, they're most welcome )
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-Best white quality Honami style settings
-Personalisation option added (Theme, Light Effects, Docomo bar and Lock screen are in Personalisation menu instead of Display)
-XPERIA™ Moved to wireless and networks section
-X-Reality Engine added (replaces Bravia Engine-2)
-Autostarts added in system section
-Developers Option now has powers to control CPU (remove any other apps used to control CPU)
-SuperStamina from Honami added
-Wifi Direct and 4G option added (not working in C5302 settings FC's, test and tell if works for C5303)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Known Bugs/Issues
-Brightness option not working FC's settings
-Glove mode is no more in Display option. (will be activated always "to avoid using glove mode unlock screen normally")
-Wifi Direct and 4G option FC's settings
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Download: Mod edit: Removed.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Installation:
DO NOT TRY TO INSTALL AS NORMAL APP
Get into CWM > Mount System > Wipe Cache Partitions > Wipe Dalvik Cache > Flash > Reboot > Enjoy
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Anyone would like to fix any bugs or use this in their ROM's you can do it I give you the permission but just notify me that you using my stuff.
(I WONT BE FIXING ANY BUGS COZ I'M GOING OUT GIVING THIS ACCOUNT OVER TO A FRIEND SO IF YOU CAN FIX ANY BUGS BEHALF OF ME I'LL BE GLAD)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Credits:
My friend for giving me all the stuff to work on and taking permissions (from whom he took it he dint told me xD)
Samarth
Me
Hey bro, how to decompile settings.apk without error?
Sent from my C5302 using xda premium
kuriboo said:
Hey bro, how to decompile settings.apk without error?
Sent from my C5302 using xda premium
Click to expand...
Click to collapse
Quoting the whole OP is not good bro
kuriboo said:
Hey bro, how to decompile settings.apk without error?
Sent from my C5302 using xda premium
Click to expand...
Click to collapse
would you mind not repeat the whole op?
And please this is not the right place to ask that question.... @dev did you program that autostarts yourself and is it similar to the app available in the market?
Greetings
Gesendet von meinem Sony Xperia SP
Sorry for posting this thread wrong way or wrong place dint had any idea it's against the rules of XDA
Place holders are not allowed..
Sent from my C5302 using XDA Premium HD app
sandy7 said:
Place holders are not allowed..
Sent from my C5302 using XDA Premium HD app
Click to expand...
Click to collapse
!
But when all-integrated devs use them noone has a problem with it...
Whatever if a mod finds this be will probably close it till you can release your mod.
Greetings
Gesendet von meinem Sony Xperia SP
sandy7 said:
Place holders are not allowed..
Sent from my C5302 using XDA Premium HD app
Click to expand...
Click to collapse
Exactly.
Thread closed.
PS
keenofhiphop said:
!
But when all-integrated devs use them noone has a problem with it...
Whatever if a mod finds this be will probably close it till you can release your mod.
Greetings
Gesendet von meinem Sony Xperia SP
Click to expand...
Click to collapse
This only happens for threads where developer collaboration is going on. Those aren't placeholders but hubs for discussing problems and possible solutions.
PPS
@RuchRha , PM me when it's uploaded, then I'll reopen the thread.
Initial version released, links and description added in OP
RuchRha said:
Initial version released, links and description added in OP
Click to expand...
Click to collapse
Brightness control is the must one... If it force close means we cant use brightness settings ha??
Rajeev said:
Brightness control is the must one... If it force close means we cant use brightness settings ha??
Click to expand...
Click to collapse
You can probably still use any software like "yet another auto brightness" from play store or many others have given the brightness bar you can use it, since I wont be able to work on anything now, maybe someone could get it fixed. (though I'll try and make some time to fix it "no promises")
Rajeev said:
Brightness control is the must one... If it force close means we cant use brightness settings ha??
Click to expand...
Click to collapse
And I atm cant work on it coz, working on my new ROM I messed up in framework after flashing it ma phone got bricked now it's stuck on Sony logo cant get into CWM nor till boot animation just stuck on Sony logo even connecting it in flashmode to flash ftf isn't working coz flashtool now isn't recognizing my device, so I guess I have to find a solution for this first before working on anything else
RuchRha said:
And I atm cant work on it coz, working on my new ROM I messed up in framework after flashing it ma phone got bricked now it's stuck on Sony logo cant get into CWM nor till boot animation just stuck on Sony logo even connecting it in flashmode to flash ftf isn't working coz flashtool now isn't recognizing my device, so I guess I have to find a solution for this first before working on anything else
Click to expand...
Click to collapse
Maybe this helps ya bro: HERE :highfive:
Joku1981 said:
Maybe this helps ya bro: HERE :highfive:
Click to expand...
Click to collapse
Thanks for the help, much appreciated, but I've tried it all nothing worked. "I'm trying the final thing PC Companion" hope this helps xD, coz even Sony Update Service is not working it says phone already has the latest software and then only gives a option to reboot. Still thanks.
RuchRha said:
Thanks for the help, much appreciated, but I've tried it all nothing worked. "I'm trying the final thing PC Companion" hope this helps xD, coz even Sony Update Service is not working it says phone already has the latest software and then only gives a option to reboot. Still thanks.
Click to expand...
Click to collapse
The problem is maybe PC Companion dont detect ur phone either
Joku1981 said:
The problem is maybe PC Companion dont detect ur phone either
Click to expand...
Click to collapse
Maybe, haha, I'm currently using repair phone/tablet 91% downloaded lets see if I get any luck. , or else sony center here I come. xD
RuchRha said:
Maybe, haha, I'm currently using repair phone/tablet 91% downloaded lets see if I get any luck. , or else sony center here I come. xD
Click to expand...
Click to collapse
Good luck brother.....
Rajeev said:
Good luck brother.....
Click to expand...
Click to collapse
Thanks bro
Yes, the "white setting" is worked, but there's some problem in it. Beside the error with the brightness setting, I also unable to access the power Management settings. It's force closed. That means I can't access the Stamina Mode and I also unable to see the battery percentage ?????
battery percentage is a must for me. Without it I'm unable to see how long my battery life is left.....
**Please fix Sir
Adiassidik said:
Yes, the "white setting" is worked, but there's some problem in it. Beside the error with the brightness setting, I also unable to access the power Management settings. It's force closed. That means I can't access the Stamina Mode and I also unable to see the battery percentage ?????
battery percentage is a must for me. Without it I'm unable to see how long my battery life is left.....
**Please fix Sir
Click to expand...
Click to collapse
I tested the stamina mode specially, and it worked perfectly for me I dint found any problems and battery % were working , I'll recheck as soon as I can fix my phone.
Edit- You can check screenshots in OP everything is working fine, maybe try flashing it again.

[HowTo]Root XOLO X1000.

XOLO X1000 was believed to be root protected. Not anymore, follow the below steps to get it rooted.
As far as i know its the only rooting method available, so if anyone has knowledge of other rooting method pls share as it might help in further development.
Here is a screenshot from X1000-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROOT INSTRUCTIONS!!
Pre-requsite
1.Install proper drivers from here
Code:
"drive.google.com/uc?id=0B6xlBPoXgsR3QVZqVGJQbVRBSGc"
2.Download suitable version of CYDIA IMPACTOR FROM
Code:
cydiaimpactor.com
Steps to ROOT
1.Connect X1000 in USB DEBUGGING MODE(Note: Drivers need to be properly installed)
2.Run Impactor.exe from the cydia impactor zip u downloaded
3.By default you will see "# drop SuperSU su to /system/xbin/su"(If not select it from the drop-down menu), click start and let it complete its process.
4.Reboot and you are done :laugh:
In case of any discrepancy fell free to ask :highfive:
One Big Reason to root
Wao!! Just Got KITKAI UI on X1000. Looks awesome
Heres a screenshot:-
Rooting really rocks
Hey, how do you unroot? (As it is the Xolo Customer Care Sucks, so the warranty is really important..)
Help!!!
Hey, I have a small problem.. I used a root app called Soft Keyz and now both my notification bar and soft keys are missing.. I did a little research and realized that it has to do with a borked systemui.apk. So could you please give me your systemui.apk by any chance? I'm kinda screwed here without the soft keys.. Appreciate if you could get back to me soon.. Thanks
SystemUi
shawnkenneth said:
Hey, I have a small problem.. I used a root app called Soft Keyz and now both my notification bar and soft keys are missing.. I did a little research and realized that it has to do with a borked systemui.apk. So could you please give me your systemui.apk by any chance? I'm kinda screwed here without the soft keys.. Appreciate if you could get back to me soon.. Thanks
Click to expand...
Click to collapse
Yup sure.
Im uploading both systemUI.apk and systemUi.odex. You might need to replace both. And remember to correct permissions.
Abhiraj4u said:
Yup sure.
Im uploading both systemUI.apk and systemUi.odex. You might need to replace both. And remember to correct permissions.
Click to expand...
Click to collapse
Thank you so much! I'll tell you once I finish flashing..
shawnkenneth said:
Hey, how do you unroot? (As it is the Xolo Customer Care Sucks, so the warranty is really important..)
Click to expand...
Click to collapse
Only method known yet is to flash stock firmware from here.
And Xolo wont help if we have a software issue. Software is supplied by intel and xolo supplies it. Colo engineers also seem to be novice.
I luckily had an opportunity to meet their software manager. I asked him if he could provide a unlocked bootloader, he was unaware of what a bootloader is. They only distrubute OTA Updates.
Abhiraj4u said:
Only method known yet is to flash stock firmware from here.
And Xolo wont help if we have a software issue. Software is supplied by intel and xolo supplies it. Colo engineers also seem to be novice.
I luckily had an opportunity to meet their software manager. I asked him if he could provide a unlocked bootloader, he was unaware of what a bootloader is. They only distrubute OTA Updates.
Click to expand...
Click to collapse
Yeah, I had a similar experience about their engineers. They mentioned to me too, that the Bootloader is not in their hands.. Well, that's what happens when you try a budget company. All we can hope for is updates, now..
I was all set to buy the Galaxy Grand Quattro but i thought I'd try Xolo, for the Processor and the beautiful screen.. Guess I should've stuck to my instincts
Anyway, thanks for the files.. Everything's back to normal now.. Cheers..
guys has anyone found a way to deodex the phone??? its because I've read that for crt off animation one should deodex the phone ... if anyone has successfully activated crt off animation ... pls let me know ... also if someone is to get the flash tool... ill askthe service center here... but don't know if they'll share... does anyone know how to adb sideload???
Abhiraj4u said:
XOLO X1000 was believed to be root protected. Not anymore, follow the below steps to get it rooted.
As far as i know its the only rooting method available, so if anyone has knowledge of other rooting method pls share as it might help in further development.
Here is a screenshot from X1000-
View attachment 2402069
ROOT INSTRUCTIONS!!
Pre-requsite
1.Install proper drivers from here
Code:
"drive.google.com/uc?id=0B6xlBPoXgsR3QVZqVGJQbVRBSGc"
2.Download suitable version of CYDIA IMPACTOR FROM
Code:
cydiaimpactor.com
Steps to ROOT
1.Connect X1000 in USB DEBUGGING MODE(Note: Drivers need to be properly installed)
2.Run Impactor.exe from the cydia impactor zip u downloaded
3.By default you will see "# drop SuperSU su to /system/xbin/su"(If not select it from the drop-down menu), click start and let it complete its process.
4.Reboot and you are done :laugh:
In case of any discrepancy fell free to ask :highfive:
Click to expand...
Click to collapse
i soft bricked my xolo x1000..can u tell how to flash ..
Deodex
Sukrith said:
guys has anyone found a way to deodex the phone??? its because I've read that for crt off animation one should deodex the phone ... if anyone has successfully activated crt off animation ... pls let me know ... also if someone is to get the flash tool... ill askthe service center here... but don't know if they'll share... does anyone know how to adb sideload???
Click to expand...
Click to collapse
Not yet.
If you come accross one, do share :good:
Flash
Achu Gowda said:
i soft bricked my xolo x1000..can u tell how to flash ..
Click to expand...
Click to collapse
How did that happen?
Follow this to flash.
Abhiraj4u said:
How did that happen?
Follow this to flash.
Click to expand...
Click to collapse
Hey, did you confirm that this technique works?
---------- Post added at 11:55 PM ---------- Previous post was at 11:28 PM ----------
Guys! Now that we finally rooted the phone, let's try doing the one thing that can make our devices fulfill their worth.. That is finding a way to run windows 7 or Windows 8 on the phone. I'm not talking about wp7 or wp8 but the actual windows.. The phone has an x86 processot. So why can't this be done?! 2Ghz and 1GB ought to be enough for a smooth experience.. Guys, please try to work on this..
IT doesnt seem fake either
shawnkenneth said:
Hey, did you confirm that this technique works?
Click to expand...
Click to collapse
@shawnkenneth No i didnt. But it works acc to users of some other forum. I dont have the link now, will post as soon as i find it.
Best of Luck
Edit:- The root procedure they posted was fake. And a comment said it worked. So im a bit suspicious about it. I would recommend you to do some research and go ahead.
And ill be mostly free by 1st dec. So will check it out.
Edit:-U can download the rom and check if its correct
Abhiraj4u said:
How did that happen?
Follow this to flash.
Click to expand...
Click to collapse
i tried that flash method..no use
Achu Gowda said:
i tried that flash method..no use
Click to expand...
Click to collapse
What's the problem?
Abhiraj4u said:
@shawnkenneth No i didnt. But it works acc to users of some other forum. I dont have the link now, will post as soon as i find it.
Best of Luck
Edit:- The root procedure they posted was fake. And a comment said it worked. So im a bit suspicious about it. I would recommend you to do some research and go ahead.
And ill be mostly free by 1st dec. So will check it out.
Edit:-U can download the rom and check if its correct
Click to expand...
Click to collapse
Well, I downloaded the ROM and all I found was an .nbo file.. I don't think it's a ROM (They're mostly zip files right?) Tell me if it's usable or not, when you're free of course..
Abhiraj4u said:
What's the problem?
Click to expand...
Click to collapse
now i went lava head office they flashed within 5mins n gave my phone without charging..nw its working smooth...i ve one doubt does above method is stable??..as i installed supersu 1.75..it asked me to update su binary ..wen i pressed update it showed instalation failed...wen i installed super user it updated su n was fine...wen i tried to install viper4android mod..then it showed dat my phn isnt rooted..wen i installed busybox also same notice appeared.....the link to d viper4android is http://forum.xda-developers.com/showthread.php?t=2191223
Root checker
Achu Gowda said:
now i went lava head office they flashed within 5mins n gave my phone without charging..nw its working smooth...i ve one doubt does above method is stable??..as i installed supersu 1.75..it asked me to update su binary ..wen i pressed update it showed instalation failed...wen i installed super user it updated su n was fine...wen i tried to install viper4android mod..then it showed dat my phn isnt rooted..wen i installed busybox also same notice appeared.....the link to d viper4android is http://forum.xda-developers.com/showthread.php?t=2191223
Click to expand...
Click to collapse
Thats shocking!! Install this. What does it say?
Edit: Supersu doesnt work for many phones, dont rely on that! Use Super user. BusyBox works fine on mine. Just check if you haven't set Automatic response=Deny in Super user->settings->security.
Edit: Busybox screenshot.
Abhiraj4u said:
Thats shocking!! Install this. What does it say?
Edit: Supersu doesnt work for many phones, dont rely on that! Use Super user. BusyBox works fine on mine. Just check if you haven't set Automatic response=Deny in Super user->settings->security.
Edit: Busybox screenshot.
Click to expand...
Click to collapse
oh okie thank you...wat abt viper thing ..did u installed it???

[Q] New P780 Out of the box - ROOTED properly?

Hello,
I have bought brand new P780 with original rom. I have problems with running sevreal networking apps and VNC server(depends which one from Google store shows curve lines or Lenovo logo).
I suppose, that device may not be fully rooted - is that possible? Can I check this in any way? Which App to check this is best (from google play)?
thank you
xysen0 said:
Hello,
I have bought brand new P780 with original rom. I have problems with running sevreal networking apps and VNC server(depends which one from Google store shows curve lines or Lenovo logo).
I suppose, that device may not be fully rooted - is that possible? Can I check this in any way? Which App to check this is best (from google play)?
thank you
Click to expand...
Click to collapse
I think and i saw this error on new phones that are "arranged" with gapps from china!
The google apps are not installed corectly!
Can i ask what original ROM do you have ?
What superuser or supersu is installed ?
stympy said:
I think and i saw this error on new phones that are "arranged" with gapps from china!
The google apps are not installed corectly!
Can i ask what original ROM do you have ?
What superuser or supersu is installed ?
Click to expand...
Click to collapse
Thank you for your fast reply
Hmm, ist strange as I dont do anything with that phone from the first run.
I suppose that this is my original ROM. Would you like to know details from system preferences to confirm which ROM I have?
I have especially bought the busybox +/pro version from Play. Is it good?
Thank you
xysen0 said:
Thank you for your fast reply
Hmm, ist strange as I dont do anything with that phone from the first run.
I suppose that this is my original ROM. Would you like to know details from system preferences to confirm which ROM I have?
I have especially bought the busybox +/pro version from Play. Is it good?
Thank you
Click to expand...
Click to collapse
Hi. Yes from Settings/about phone or something / version information
I use BusyBox Free from Stericson . It is good !
stympy said:
Hi. Yes from Settings/about phone or something / version information
I use BusyBox Free from Stericson . It is good !
Click to expand...
Click to collapse
Thank you for reply,
Android ver 4.4.2
Baseband(?)
p780,v101,2014,/03/12 15:06
compilation
vibeui_v2.0_9439_7.10.1_dev_p780
My version is BusyBox PRO also from Stericson but I dont know what should I do there. Only verify root privileges?
What is interesting, now, when I gone to that menu and clicked "System update" Ive got info about app crash.
What is more inetresting in that ROM i havent any Lenovo native apps like Lenovo Power Manager, but I have other 'system' apps(cleaners,etc).
Thank you
xysen0 said:
Thank you for reply,
Android ver 4.4.2
Baseband(?)
p780,v101,2014,/03/12 15:06
compilation
vibeui_v2.0_9439_7.10.1_dev_p780
My version is BusyBox PRO also from Stericson but I dont know what should I do there. Only verify root privileges?
What is interesting, now, when I gone to that menu and clicked "System update" Ive got info about app crash.
What is more inetresting in that ROM i havent any Lenovo native apps like Lenovo Power Manager, but I have other 'system' apps(cleaners,etc).
Thank you
Click to expand...
Click to collapse
Hi. Your version is an chinese version ! Developer Version of VIBEUI 2.0
It is an modified version!
If you want to put a stable version tell me !
stympy said:
Hi. Your version is an chinese version ! Developer Version of VIBEUI 2.0
It is an modified version!
If you want to put a stable version tell me !
Click to expand...
Click to collapse
w0w, I was sure that I am buying not-modified version of phone. OMG
Thank you for that information.
Could you please give me more informatiion what should I do now? I would like to use all features of Android, with OTG, networking advanced features, and VNC server. Bluetooth, and WIFI and GPS I also need.
And the most important - I need to have that STABLE. as stable as possible. And what is the most mportant now - everything is stable.
thank you for support
xysen0 said:
w0w, I was sure that I am buying not-modified version of phone. OMG
Thank you for that information.
Could you please give me more informatiion what should I do now? I would like to use all features of Android, with OTG, networking advanced features, and VNC server. Bluetooth, and WIFI and GPS I also need.
And the most important - I need to have that STABLE. as stable as possible. And what is the most mportant now - everything is stable.
thank you for support
Click to expand...
Click to collapse
This is more diversified talk! For simple choice i recomend for the first time to choose betwen this 2 firmware:
ROW - means Rest Of the World
CN -china !
Here is the ROW : LINK!
Here is Baralajbi's firmware: LINK! This is CN based.
Both are flashed with SP Flash tool !
Tell me what ROM do you want to install from those 2 !
stympy said:
This is more diversified talk! For simple choice i recomend for the first time to choose betwen this 2 firmware:
ROW - means Rest Of the World
CN -china !
Here is the ROW : LINK!
Here is Baralajbi's firmware: LINK! This is CN based.
Both are flashed with SP Flash tool !
Tell me what ROM do you want to install from those 2 !
Click to expand...
Click to collapse
Thank you for reply
Would be great to have full support for European languages. I would like to ave t9 in English and few EU languages if possible.
Also I would like to have any way-back as I have 2 years of the warranty - is that possible to replace the ROM (and have good effects) and make it unvisible in service when , ex. I will have any problem in later time?
Thank you
xysen0 said:
Thank you for reply
Would be great to have full support for European languages. I would like to ave t9 in English and few EU languages if possible.
Also I would like to have any way-back as I have 2 years of the warranty - is that possible to replace the ROM (and have good effects) and make it unvisible in service when , ex. I will have any problem in later time?
Thank you
Click to expand...
Click to collapse
Hmmm... this is a little bit harder!
For complete backup you must do a trick and flash a custom recovery like TWRP. From the recovery you must do a full backup af your existing ROM.
After that you can replace your ROM with one i have showed you !
Try to reboot your phone in recovery and see iff you have allready a custom one !
stympy said:
Hmmm... this is a little bit harder!
For complete backup you must do a trick and flash a custom recovery like TWRP. From the recovery you must do a full backup af your existing ROM.
After that you can replace your ROM with one i have showed you !
Try to reboot your phone in recovery and see iff you have allready a custom one !
Click to expand...
Click to collapse
Am I correct to do that by pushing [volume down] key when holding power button?
Additionally, could you please let me know if would be possibility to make the default storage on SD card?
Thank you
xysen0 said:
Am I correct to do that by pushing [volume down] key when holding power button?
Additionally, could you please let me know if would be possibility to make the default storage on SD card?
Thank you
Click to expand...
Click to collapse
Because you have your rom rooted you could download from market a small app called : Reboot to recovery !
Orr power off the phone and start with power vol- and vol+ pressed !
xysen0 said:
Am I correct to do that by pushing [volume down] key when holding power button?
Additionally, could you please let me know if would be possibility to make the default storage on SD card?
Thank you
Click to expand...
Click to collapse
How to make the default storage on SD card:
Go to settings/storage/default write disk
There you will choose External Storage.
Voila: bigger storage!
stympy said:
Because you have your rom rooted you could download from market a small app called : Reboot to recovery !
Orr power off the phone and start with power vol- and vol+ pressed !
Click to expand...
Click to collapse
Hello,
Thank you for your message
I have rebooted to recovery via app
And the phone load screen with title Android system recovery <3e>
As I havent seen that before (earlier on other phones TWRP and CWM only) I am not sure know if thath is enough to safe what I need ?
stympy said:
How to make the default storage on SD card:
Go to settings/storage/default write disk
There you will choose External Storage.
Voila: bigger storage!
Click to expand...
Click to collapse
About the storage- I suppose that my P780 is 4gig-version.
I have done what you mentioned long time ago, but still have problems when trying to install new apps (and each I am moving to SD) - Insufficient storage space
Thank you, best regards
xysen0 said:
Hello,
Thank you for your message
I have rebooted to recovery via app
And the phone load screen with title Android system recovery <3e>
As I havent seen that before (earlier on other phones TWRP and CWM only) I am not sure know if thath is enough to safe what I need ?
Click to expand...
Click to collapse
Seems that you have stock recovery installed. You need to reflash one of that custom recovery.
Sent from my SMT TAB 704DC
---------- Post added at 02:54 PM ---------- Previous post was at 02:51 PM ----------
xysen0 said:
About the storage- I suppose that my P780 is 4gig-version.
I have done what you mentioned long time ago, but still have problems when trying to install new apps (and each I am moving to SD) - Insufficient storage space
Thank you, best regards
Click to expand...
Click to collapse
Install from market Titanium Backup. Open it and on the first page take a screenshot and post here. I need to see the partitioning tipe.
Sent from my SMT TAB 704DC
stympy said:
Seems that you have stock recovery installed. You need to reflash one of that custom recovery.
Sent from my SMT TAB 704DC
---------- Post added at 02:54 PM ---------- Previous post was at 02:51 PM ----------
Install from market Titanium Backup. Open it and on the first page take a screenshot and post here. I need to see the partitioning tipe.
Sent from my SMT TAB 704DC
Click to expand...
Click to collapse
hello,
is that what you need?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
xysen0 said:
hello,
is that what you need?
Hi. Yes! This is what i need!
Seems that you have still space in system and in media !
Click to expand...
Click to collapse
stympy said:
xysen0 said:
hello,
is that what you need?
Hi. Yes! This is what i need!
Seems that you have still space in system and in media !
Click to expand...
Click to collapse
Hmm, but to install that I have to clean all cahces and temporary.
What should I do now? For backup current ROM and modify to any working?
regards
Click to expand...
Click to collapse
hello,
how can I backup all my phone? What and how should I do ?
Is there any play store safe app to do that?
I suppose that I need to replace the Andorid recovery? Or maybe I would can do that without removing it?

Tethering/Hotspot

Has anyone gotten any form of tethering to work on this phone yet? (either by modding the native hotspot or a separate app)
Has anyone tried this MOD on their M9 and gotten it to work?
Have you tried flashing the script?
wytecaztle said:
Have you tried flashing the script?
Click to expand...
Click to collapse
No, because it has framework edits. That could be a disaster. On the other hand, I have a backup... nothing to lose i guess, except time.
SteelH said:
Has anyone gotten any form of tethering to work on this phone yet? (either by modding the native hotspot or a separate app)
Has anyone tried this MOD on their M9 and gotten it to work?
Click to expand...
Click to collapse
chas has improved that mod, no more database editing...we'll be posting the mod once it's ready
Try galaxy tools
Sent from my SM-N910P using xda premium
OMJ said:
chas has improved that mod, no more database editing...we'll be posting the mod once it's ready
Click to expand...
Click to collapse
Hello,
You might want to look into /system/customize there are two files in the sprint rom that contain the APNs in an encrypted format (cust_cdmaconn.dat and cust_gsmconn.dat) . I was unable to decrypt them, but found that simply deleting them reverts the APN settings to the ones located in /system/framework/framework-res.apk > xml > apn.xml
I have been changing my APNs for a while and find it easier to change them directly in the framework-res.apk. I have an old version of apktool and a few bat files that I use. I can upload them if you need them or can't decompile the framework-res.apk yourself. Hope that is what your looking for.
Rsotbiemrptson
Rsotbiemrptson said:
Hello,
You might want to look into /system/customize there are two files in the sprint rom that contain the APNs in an encrypted format (cust_cdmaconn.dat and cust_gsmconn.dat) . I was unable to decrypt them, but found that simply deleting them reverts the APN settings to the ones located in /system/framework/framework-res.apk > xml > apn.xml
I have been changing my APNs for a while and find it easier to change them directly in the framework-res.apk. I have an old version of apktool and a few bat files that I use. I can upload them if you need them or can't decompile the framework-res.apk yourself. Hope that is what your looking for.
Rsotbiemrptson
Click to expand...
Click to collapse
I guess I wasn't clear enough...we already have it working
OMJ said:
I guess I wasn't clear enough...we already have it working
Click to expand...
Click to collapse
Appreciate the effort put into this. Thank you. Looking forward to the post.
OMJ said:
I guess I wasn't clear enough...we already have it working
Click to expand...
Click to collapse
Hello,
Glad you got it, I did understand you have a mod coming, was only trying to add some new knowledge I found out about the M9. This thing seems much different then the M8. Interested to see how you did it.
Rsotbiemrptson
Rsotbiemrptson said:
Hello,
Glad you got it, I did understand you have a mod coming, was only trying to add some new knowledge I found out about the M9. This thing seems much different then the M8. Interested to see how you did it.
Rsotbiemrptson
Click to expand...
Click to collapse
yeah, @chas123 figured this out a while ago, shortly after posting his M8 mod...so now in our M8 ROM (and upcoming M9 ROM) we are deleting cust_cdmaconn.dat, and changing the apn in fwres & also another edit in telephony-common.
SteelH said:
Has anyone gotten any form of tethering to work on this phone yet? (either by modding the native hotspot or a separate app)
Has anyone tried this MOD on their M9 and gotten it to work?
Click to expand...
Click to collapse
Have you found a working tether solution for the M9 yet?
ReproOne said:
Have you found a working tether solution for the M9 yet?
Click to expand...
Click to collapse
it's coming....
Anxiously waiting.....
Shouldn't a release date be announced, or possibly a teaser trailer?
ReproOne said:
Anxiously waiting.....
Shouldn't a release date be announced, or possibly a teaser trailer?
Click to expand...
Click to collapse
oh u want a teaser? lol...we've been pretty busy getting our M9 ROM done (almost done), and also updating M8 ROM...it's @chas123 call as to when he will release it to the mass...I suspect soon, as we are getting caught up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Will you all also have a way to WiFi tether if keeping stock and rooted?
ReproOne said:
Will you all also have a way to WiFi tether if keeping stock and rooted?
Click to expand...
Click to collapse
for this hack, u need to be on a deodexed ROM...I'll be posting a stock rooted deodex ROM, if you want to go that route
Thanks for the reply about the hack and the deodexed ROM. If that ends up being the best solution to get tethering, then I will go that route. My question, as I am unclear, is can that ROM then be applied without the loss of the customization and app settings on the phone? Also, future OTA updates would not work as they would have to be applied via your releases, correct?
ReproOne said:
Thanks for the reply about the hack and the deodexed ROM. If that ends up being the best solution to get tethering, then I will go that route. My question, as I am unclear, is can that ROM then be applied without the loss of the customization and app settings on the phone? Also, future OTA updates would not work as they would have to be applied via your releases, correct?
Click to expand...
Click to collapse
dirty flash? probably...yes, otas would be broken
OMJ said:
dirty flash? probably...yes, otas would be broken
Click to expand...
Click to collapse
But no more "broken" than rooting was now. If you used the existing procedures to lock, restore stock recovery etc. then you could take OTA and reunlock, etc.
That would be the only way to get the firmware from the next OTA (until we s-off). Right?
mswlogo said:
But no more "broken" than rooting was now. If you used the existing procedures to lock, restore stock recovery etc. then you could take OTA and reunlock, etc.
That would be the only way to get the firmware from the next OTA (until we s-off). Right?
Click to expand...
Click to collapse
Exactly, it makes no difference how big or small of a change to system, ota will be broken.
Even after s-off, you will have to flash a untouched system and stock recovery to install ota.
Sent from my Nexus 7 using XDA Premium 4 mobile app

Categories

Resources