[4.4.4][CDMA]Snake's Venom 4.4.4 Moto X Port Build #102 For XT1080/M/1030 - Droid Ultra Original Android Development

NEITHER MYSELF NOR XDA ARE RESPONSIBLE FOR YOUR PHONE. FLASH AT YOUR OWN RISK​
Updated:10/06/14
Welcome to Snake's Venom 4.4.4 Port Build #102
The purpose of this port is to pull the newest Moto X (1st Gen) CDMA Verizon firmware and port it to the Droid Maxx/Ultra/Mini.
The benefits over the Maxx 4.4.4 update are as follows:
1) Full Google Dialer
2) Updated Gmail style email Apps
3) Fixes LTE handoff bug for T-Mobile GSM users.
4) Anything else that Motorola Commonly leaves out from the Maxx Rom
5) Native Tether Enabled
6) Circle Widget ported
7) Some report battery life improvement
CHANGELOG:
Build 102
1) Updated Baseband to 23255.127.76.00R
Build 99
1) Updated base port to Build 99
2) Updated and cleaned up Patches
3) Added Tether fixes to XT1030
4) Removed unlocked warning message from logo.
5) Removed Verizon branding from boot animation
6) Addressed Recent Apps patch bug which would report incorrect build
7) Increased Display size to 5.9 inches per @Caseyk621 Kidding haha
Build 96
1) Patched an issue which caused connectivity issues when Wi-Fi tethering to PC's.
Build 83:
1) Introduced Patched Support for Droid Mini XT1030. Shout out to @Rottgrub for his support
Build 77:
1) Patched an issue which prevented MotoConnect from functioning correctly.
Build 64:
1) Updated baseband to 4.4.4 baseband
2) Ported Circle Widget
PREREQUISITES
Droid Maxx/Ultra/Mini with Unlocked Bootloader
TWRP Recovery
RSD Lite 6.15 or Newer
RSD LITE INSTALLATION
1) Download the newest build linked-Build 102
HERE
OR HERE
OR EVEN HERE
2) Extract the package to your PC
3) Copy and paste the zips found in the Patches Folder to the root of your SD card
4) Reboot Recovery- Back Up current ROM
5) Perform factory reset in TWRP ensuring to only wipe DATA and CACHE. DO NOT PERFORM A FULL RESET WIPING INTERNAL STORAGE.
6) Reboot to Bootloader
7) In RSD lite navigate to the "Snake's Venom" XML file found in the port package extracted earlier.
8) Start RSD lite
9) Once Rebooted into the Port, Reboot to Recovery
10) Flash the "Display fix" patch in TWRP recovery. XT1030 users need to flash the XT1030 patch.
11) Reboot. Verify Success. Profit!
If you like my work here, feel free to donate and buy me a beer! Haha
FASTBOOT INSTALLATION
1) Download the newest build linked below- Build #102
HERE
OR HERE
OR EVEN HERE
Along with mfastboot attached to this post
2) Extract the package to your PC and place the contents of the port folder along with mfastboot in the same folder which you have adb setup in.
3) Copy and paste the zips found in the Patches Folder to the root of your SD card
4) Reboot Recovery- Back Up current ROM
5) Perform factory reset in TWRP ensuring to only wipe DATA and CACHE. DO NOT PERFORM A FULL RESET WIPING INTERNAL STORAGE.
6) Reboot to Bootloader
7) Now we must run the following commands below in a command prompt pointed to the folder which you copied the port to earlier
Code:
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash system system.img
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot reboot
8) Once Rebooted into the Port, Reboot to Recovery
9) Flash the "Display fix" patch in TWRP recovery. XT1030 users need to flash the XT1030 patch
10) Reboot. Verify Success. Profit!
If you like my work here, feel free to donate and buy me a beer! Haha
RECENT APPS:
Some of you may notice the recent apps button re-mapped as menu. This is due to a conflict between disabling the virtual keys and displaying the Menu. If you would like to revert this change, flash the "Recent Apps" patch in recovery. Be aware that if reverted, some apps might not display the menu button.
Circle Widget:
As you know, the Moto X does not have the Droid Circle Widgets from factory. If you would like to flash the widget, simply flash the Circle widget patch from the patches folder of the package. Credit to @CornholioGSM for the source from the Photon. Needed editing and updating to work with the Droid Maxx port.

@bigv5150 @Caseyk621 this does include the gmail style email app

As always great work
sent from "my kungfu is stronger then yours" XT1080

bigv5150 said:
As always great work
sent from "my kungfu is stronger then yours" XT1080
Click to expand...
Click to collapse
Thanks brother. This has got to be my most comprehensive yet. You flash it?

Topsnake said:
@bigv5150 @Caseyk621 this does include the gmail style email app
Click to expand...
Click to collapse
Awesome bro! I can't wait to try it! Love that you have the circles working! I'll let you know when I get a chance to flash it. Hopefully soon.
Sent From My Droid Ultra

Caseyk621 said:
Awesome bro! I can't wait to try it! Love that you have the circles working! I'll let you know when I get a chance to flash it. Hopefully soon.
Sent From My Droid Ultra
Click to expand...
Click to collapse
Sounds good!

Topsnake said:
Thanks brother. This has got to be my most comprehensive yet. You flash it?
Click to expand...
Click to collapse
Not yet I'm working night's but I'm going to when I get home
sent from "my kungfu is stronger then yours" XT1080
---------- Post added at 10:36 AM ---------- Previous post was at 10:32 AM ----------
Does this erase my SD card or does your XML script have save data. If not let everyone know to backup pictures music etc. This is basically an fxz file right.
sent from "my kungfu is stronger then yours" XT1080

bigv5150 said:
Not yet I'm working night's but I'm going to when I get home
sent from "my kungfu is stronger then yours" XT1080
---------- Post added at 10:36 AM ---------- Previous post was at 10:32 AM ----------
Does this erase my SD card or does your XML script have save data. If not let everyone know to backup pictures music etc. This is basically an fxz file right.
sent from "my kungfu is stronger then yours" XT1080
Click to expand...
Click to collapse
It is a save data script.

Ok brother rebootinig now then just have to apply the zips hey does this have the power menu mod for reboot etc. and if not do you know how to make one for the life of me I can't get apktool to recompile the framework. Hey I thought this was from the xt1060 it says xt1053. Also I think you can change the device name in the build prop to see this as an xt1080 I change mine to samsung to use miilk music and the play store sees it as a samsung.

bigv5150 said:
Ok brother rebootinig now then just have to apply the zips hey does this have the power menu mod for reboot etc. and if not do you know how to make one for the life of me I can't get apktool to recompile the framework. Hey I thought this was from the xt1060 it says xt1053. Also I think you can change the device name in the build prop to see this as an xt1080 I change mine to samsung to use miilk music and the play store sees it as a samsung.
Click to expand...
Click to collapse
It is from the xt1060. My 4.4.3 port is the xt1053. You download the right one? Lol. It does not have the reboot mod. I can do some research and make a patch for it. Been running this port for over 24 hours now. Smoothhhhhhhh
I edited the build.prop to reflect 1080 but can't get it to report as 1080 when plugged into to the computer. Will research further.

Ok can check and see if you have an option for setting in google now. When I open the app the 3 dots to get into settings is not there also you cant launch google search just by saying "ok google" from the home screen you have to open the app. Yeah I downloaded the correct one but when I connected my maxx to the computer it showed xt1053 for the sdcard. Now it says droid maxx I don't care as long as everything works and is seems to be all good except the google now.

bigv5150 said:
Ok can check and see if you have an option for setting in google now. When I open the app the 3 dots to get into settings is not there also you cant launch google search just by saying "ok google" from the home screen you have to open the app.
Click to expand...
Click to collapse
Yeah that's a compatibility issue. Working on a patch for that. For now just use the recent apps button as the menu button. Should be set like that after the display patch.
Didn't try the google now thing.

Topsnake said:
It is from the xt1060. My 4.4.3 port is the xt1053. You download the right one? Lol. It does not have the reboot mod. I can do some research and make a patch for it. Been running this port for over 24 hours now. Smoothhhhhhhh
I edited the build.prop to reflect 1080 but can't get it to report as 1080 when plugged into to the computer. Will research further.
Click to expand...
Click to collapse
To get the circles to work did you just transplant Motlauncher from the 1080? Or did you modify the app? I ask because I want to be able to use TiB to restore all my stuff. Home screens are really time consuming to set up his I like. And time setting everything back up is holding me back atm
Sent From My Droid Ultra

Caseyk621 said:
To get the circles to work did you just transplant Motlauncher from the 1080? Or did you modify the app? I ask because I want to be able to use TiB to restore all my stuff. Home screens are really time consuming to set up his I like. And time setting everything back up is holding me back atm
Sent From My Droid Ultra
Click to expand...
Click to collapse
I had to transfer permissions and lib files etc. Do this. Flash the port. Flash the display fix. Flash the circle widget. Then go to TiBu and restore data only to the launcher. That should yield the result you want. Again data only.

bigv5150 said:
Ok can check and see if you have an option for setting in google now. When I open the app the 3 dots to get into settings is not there also you cant launch google search just by saying "ok google" from the home screen you have to open the app. Yeah I downloaded the correct one but when I connected my maxx to the computer it showed xt1053 for the sdcard. Now it says droid maxx I don't care as long as everything works and is seems to be all good except the google now.
Click to expand...
Click to collapse
Is the google thing present in the maxx firmware aswell?

Topsnake said:
Is the google thing present in the maxx firmware aswell?
Click to expand...
Click to collapse
Well I found a work around I downloaded the google launcher it gave me the 3 dots to get into settings by sliding to the left screen that has google now on it. then search for google everywhere from that screen (you need to do this to get the option) and then open the settings. Click on voice and select ok google detection from there choose any screen. you will be able to now launch google even when using mot launcher. However there is still no menu in the google now app. And to answer your question yes this worked on the maxx 4.4.4. This is not a big issue I never change anything in google now and if I need to I just will change to the google launcher if I need to make any changes then switch back to the motlauncher so dont' kill yourself finding a fix it is not necessary.

bigv5150 said:
Well I found a work around I downloaded the google launcher it gave me the 3 dots to get into settings by sliding to the left screen that has google now on it. then search for google everywhere from that screen (you need to do this to get the option) and then open the settings. Click on voice and select ok google detection from there choose any screen. you will be able to now launch google even when using mot launcher. However there is still no menu in the google now app. And to answer your question yes this worked on the maxx 4.4.4. This is not a big issue I never change anything in google now and if I need to I just will change to the google launcher if I need to make any changes then switch back to the motlauncher so dont' kill yourself finding a fix it is not necessary.
Click to expand...
Click to collapse
Big, the recent apps button is the menu button. If you hit it, the menu pops up. That is unless you flashed the recent apps patch.

Topsnake said:
Big, the recent apps button is the menu button. If you hit it, the menu pops up. That is unless you flashed the recent apps patch.
Click to expand...
Click to collapse
I think you misunderstood me not the recent apps button that works fine I flashed the zip. If you open the google now app there is option for settings at the bottom of the page. There should be 3 dots so you can add or delete cards that you wish to pop up in google now. The only way to access that is through the google launcher now. Why I have no idea.

bigv5150 said:
I think you misunderstood me not the recent apps button that works fine I flashed the zip. If you open the google now app there is option for settings at the bottom of the page. There should be 3 dots so you can add or delete cards that you wish to pop up in google now. The only way to access that is through the google launcher now. Why I have no idea.
Click to expand...
Click to collapse
Its a compatibility issue. If you revert the recent apps button back to menu, you'll be able to access the menu anytime you tap that button. That's how I have mine set up.
Thats the way it was back in the droid RAZR/bionic days when we actually had menu buttons.

Topsnake said:
Its a compatibility issue. If you revert the recent apps button back to menu, you'll be able to access the menu anytime you tap that button. That's how I have mine set up.
Thats the way it was back in the droid RAZR/bionic days when we actually had menu buttons.
Click to expand...
Click to collapse
Yeah figured it was something like that it's no big deal like I posted there is a work around to get it to work and still keep the recent apps button. I would rather have that then the menu button.

Related

[ITUTORIAL][FAQ]ViperDNA ROM Discussion

ViperDNA ROM Discussion & Support Thread​
Due to the popularity of the ViperDNA rom, and wanting to better assist the users, we are opening this thread to allow for non development related questions and discussion, support questions, advice, help and how to, all that good stuff.
I am not the developer of ViperDNA, I'm simply maintaining this thread so that the main developer is not overwhelmed with too much general discussion and not able to focus on the development aspect of the rom. Many of you know me, my niche has been and will continue to be trouble shooting, support, and helping new users get started in the custom world of Android.
In the thread, you can post questions about installations, discussions of potential bugs as well as user errors, and general Q&A related to the ViperDNA ROM. I will be updating this OP to look much better, and will also be adding sections and subsections with important links.
I urge all of our users to participate and help out with this thread, this is a community effort not just me alone.
ViperDNA 1.2.0 Info
ROM NEEDS A CLEAN INSTALL
Instructions for Clean Install.
Note S On users will want a copy of rom zip on their computer desktop and a copy on the DNA's sdcard, s off only needs the rom zip file on the sdcard
1. Make a Nandroid backup just in case
2. Reboot to Recovery
3. Wipe these INSIDE recovery: Factory Reset, System, Dalvic cache
4. Choose the flash zip menu and select zip file from the sdcard and install the rom
5. S-Off users say yes to the reboot after installation is complete.
*5b. S-On Users will need to extract the rom zip file in a desktop folder and find the file boot.img and copy to their working adb/fastboot folder (For me it would be C:/Android-sdk/Platform-tools)
*5c. Right click while holding shift, in a blank space in the folders where fastboot.exe is located and choose "open command window here" from the right click menu
Run the command "fastboot flash boot boot.img" without the quotes and press enter when its done type "fastboot reboot" without quotes and press enter.
That's It, Setup is Complete
Note: Factory Reset in recovery means wiping the data partition except for media (internal storage, or sdcard) and wiping cache.
Radio and Firmware Information: You do not have to be on the latest firmware (2.04) to flash Viper 1.2.0. I recommend that you achieve s off and try the 2.0.4 radios if battery life is a concern especially because one will work better for your unique phone's hardware and network, signal strength and usage pattern.
Kernel: ONLY RUN THE KERNEL THAT'S INSTALLED IN THE ROM. Zone also has a stock 2.04 kernel posted in the android development section.
Do NOT run custom kernels with this rom until custom 2.04 kernels available, which will be after HTC releases the kernel source.
1.2.0 Important Tips
For instant help you can use the IRC Channel: http://chat.andirc.net:8080/?channels=#droid-dna
Just click on Docnok63 and select PM
For Google maps to work you need to open settings/location and check to enable the new Google location settings. There's now four options instead of three.
Another one for Install Instructions
Nice Charlie :good:
Count me in ! (for assisting with questions)
Re: [INFO][FAQ]ViperDNA ROM Discussion
I have two questions. How can I add more apps on the home screans. And is there anyway to change up the app drawer. I prefer scrolling vertically rather then horizontal. Everything is running perfectly just looking to tweak things a little.
Re: [INFO][FAQ]ViperDNA ROM Discussion
I'm not sure if this is the rom or the app but when I plug in my otg usb into my phone SwiftKey constantly shows crash error reports... I'm not sure if you guys have seen this before or not... It does not effect moving files or anything it is just weird...
Re: [INFO][FAQ]ViperDNA ROM Discussion
krazya said:
I have two questions. How can I add more apps on the home screans. And is there anyway to change up the app drawer. I prefer scrolling vertically rather then horizontal. Everything is running perfectly just looking to tweak things a little.
Click to expand...
Click to collapse
Long press the app in the app drawer and move it to the home screen.
Install a different launcher, I highly recommend nova, apex is another good one
Sent from my HTC6435LVW using xda app-developers app
---------- Post added at 09:08 PM ---------- Previous post was at 09:07 PM ----------
danielhall2689 said:
I'm not sure if this is the rom or the app but when I plug in my otg usb into my phone SwiftKey constantly shows crash error reports... I'm not sure if you guys have seen this before or not... It does not effect moving files or anything it is just weird...
Click to expand...
Click to collapse
I have some similar issues too, but not until after I unmount the drive.
Sent from my HTC6435LVW using xda app-developers app
Re: [INFO][FAQ]ViperDNA ROM Discussion
Exactly what I was looking for thank you! Switched to apex and will have to tweak it until its just right.
danielhall2689 said:
I'm not sure if this is the rom or the app but when I plug in my otg usb into my phone SwiftKey constantly shows crash error reports... I'm not sure if you guys have seen this before or not... It does not effect moving files or anything it is just weird...
Click to expand...
Click to collapse
The error reports on mine come after un-mounting. I am not sure yet as to the cause. I had the same issue prior to rooting
Re: [INFO][FAQ]ViperDNA ROM Discussion
RLGL said:
The error reports on mine come after un-mounting. I am not sure yet as to the cause. I had the same issue prior to rooting
Click to expand...
Click to collapse
Im having the same problem and after some research it looks like people are having the same issues on stock and custom roms.
I'm using stickmount pro. What I've found is that after unmounting or removing the device a reboot is required because my apps go haywire. The only time I've seen similar issues is when people use something like apps2sd and their phone boots before the sdcard is mounted, so the shortcuts on the homescreen or widgets disappear and the app force closes all over the place and disappears from the app drawer.
Obviously the problem with us is not because the apps are installed on an external directory, but the symptoms are very similar.
I will be doing more research and its going to be a focus of mine. I'll keep you guys and gals updated and would love to hear any input or see links that you run across involving DNA and OTG.
Something else with OTG is that when I unmount the USB drive in stickmount, and then I unplug the drive, I get the warning message about the drive being removed while in use or something like that. So its almost like stickmount isn't unmounting, it just thinks its unmounting, and that improper unmounting is what sends the directories haywire.
Sent from my HTC6435LVW using Xparent Red Tapatalk 2
Re: [INFO][FAQ]ViperDNA ROM Discussion
RLGL said:
The error reports on mine come after un-mounting. I am not sure yet as to the cause. I had the same issue prior to rooting
Click to expand...
Click to collapse
I get an error on connecting otg about not being a valid charging source. On disconnect, several processes crash, which trace to specific apps, including Battery Monitor Widget Pro, Pure Messenger and Gmail Label Notifier. If I disable those apps, then no crash, so I'm pretty sure this is not ROM related.
Sent from my HTC6435LVW using Tapatalk 2
Re: [INFO][FAQ]ViperDNA ROM Discussion
danielhall2689 said:
I'm not sure if this is the rom or the app but when I plug in my otg usb into my phone SwiftKey constantly shows crash error reports... I'm not sure if you guys have seen this before or not... It does not effect moving files or anything it is just weird...
Click to expand...
Click to collapse
Interesting indeed... I've also had this same issue with the SwiftKey error while utilizing otg. Thanks for looking into this Charlie.
Sent from a Venomous DNA via Southwest desert frequencies
Used the search in the other thread but didn't quite find the answer I was looking for.
Do I start with 1.1.0 and then use the OTA to update to 1.1.3? Should I just wait till 1.2 comes out and then flash, if it makes any difference?
UrGuardian999 said:
Used the search in the other thread but didn't quite find the answer I was looking for.
Do I start with 1.1.0 and then use the OTA to update to 1.1.3? Should I just wait till 1.2 comes out and then flash, if it makes any difference?
Click to expand...
Click to collapse
Download 1.1.0 from the original page.
Download this zip file to PREVENT the VERIZON ota. http://forum.xda-developers.com/showthread.php?t=2149417
Install 1.1.0. reboot.
IMMEDIATELY after it boots reboot into recovery and install the zip file above.
then boot and let venom take you through all 3 updates on it's own.
Droidem said:
Download 1.1.0 from the original page.
Download this zip file to PREVENT the VERIZON ota. http://forum.xda-developers.com/showthread.php?t=2149417
Install 1.1.0. reboot.
IMMEDIATELY after it boots reboot into recovery and install the zip file above.
then boot and let venom take you through all 3 updates on it's own.
Click to expand...
Click to collapse
If I'm on wi-fi only and will be on wi-fi only for a few months, do I have to worry about the disable ota verizon part? Just curious really, sounds easy enough
Re: [INFO][FAQ]ViperDNA ROM Discussion
UrGuardian999 said:
If I'm on wi-fi only and will be on wi-fi only for a few months, do I have to worry about the disable ota verizon part? Just curious really, sounds easy enough
Click to expand...
Click to collapse
You really don't have to worry about it. Worse thing that would happen is that it auto downloads, it can't install on a custom recovery. And 1.1.3 has the ota removed so you don't even have to worry about it installing.
Sent from my HTC6435LVW using xda app-developers app
Re: [INFO][FAQ]ViperDNA ROM Discussion
I didn't choose to apply the sense camera mod during instal. Is there a way to apply them after the fact?
Sent from my HTC6435LVW using xda app-developers app
Hey guys looking for help with Viper rom. I used fastboot to flash all the way up to version 1.1.3 and the boot img. My phone is booting properly however when I go into the hub and try to apply tweaks or download themes and such i get a blank white screen. Would someone please help me

DISCONTINUED[ROM][July 27, 2013] HTC Desire V Senseless European version

DISCONTINUED
Sorry, I just sold my phone, and I can't develop for it anymore. I will keep these threads for you guys until something better will occur, but I will have some trouble to solve the problems. Thank you for all appreciations.
-- If this will help, you can still say thank you -- press the Thanks button! :good:
I was never a fan of sense, and if I would knew what is that when I bought the phone, I would have different phone now.
But, I made a version based on HTC T328W European ROM 1.73.401.4, with less sense possible without breaking HTC system.
FEATURES
- I integrated the new SOLO Launcher Free, which is very good.
- I replaced a lot of apps with better ones
- I let sense 4 lockscreen in place because I like to see who is calling before answering, and also it's not unlocking automaticaly when receive a call like a third party lockscreen - but you are free to replace this with what you want.
- I integrated Sony Bravia Engine 2 and Xloud.
- I aplied Supercharger and init.d from my other ROM.
- and many other things...
The ROM is optimized, zipaligned, odexed or deodexed at your choice.
Untill now, the ROM is very fast, stable and smooth, and it seems to be more friendly with battery. I didn't see any bugs. If you do, please tell me to solve them.
INSTALLATION
To install, it's the same procedure you know:
Connect your sdcard to computer with a sdcard adapter, or in recovery with USB Mount, and delete these folders:
.android-secure
Android
LOST DIR
Click to expand...
Click to collapse
Copy this ROM zip to sdcard. Reinsert sdcard in your phone.
1. boot in bootloader (from shutt down mode, press vol down and briefly the power button at the same time and keep pressing vol down untill bootloader starts and then press power again to enter in fastboot)
2. connect your phone to computer
3. flash recovery [fastboot flash recovery maxrecovery6.img] - if you don't have a custom recovery, or if you want to try one of my versions
4. flash boot [fastboot flash boot desenboot.img] -see attachments (if you are running european version, you don't need to do that)
5. press power to return to bootloader
6. press vol down to select recovery and then press power - the phone will reboot in recovery.
7. Go advanced - wipe Dalvik cache, confirm
8. Go back, and then wipe all data/factory reset
9. Install zip from sdcard
10. choose ROM zip and confirm install
11. Wait, it will take some time
12. After install finished, reboot phone
First boot will last a litle bit longer (more minutes if your sdcard has a lower class).
After phone start, in first home screen, press home buton to start Settings phone wizard (you will see a home sign in notifications bar - that's what it means); if you don't want to do that you can't enter to your phone. The settings wizard is the classic one from htc. After that, you will figure out what to do
Enjoy!
DOWNLOADS - version 4 updated
1. Deodexed version - only app folder
2. Version with Gapps included
UPDATES:
Rebuilded ROM, removed buggy apps, slimed without gapps. These can be flashed separately if you need them. Also gapps zip will replace the calendar with stock one.
QUICK TIP:
If you like to customize the ROM, and after that to odex it, it's easy.
Download the deodexed version, flash it, remove apps you don't need, add apps you want. At this part, stay away from HTC apps, they are already striped out at maxim.
Then connect the phone to PC in charging mode, open a command prompt terminal where do you have adb installed and type:
Code:
Code:
adb remount <Enter> (this will start adb server and remount your phone system - you should see 'remount succeeded')
adb shell <Enter> (you enter in phone root shell)
dexo <Enter> (and wait for the phone to restart - it will take up to 2 min)
The odexer method is developed by tommytomatoe and presented here.
You only have to do what I wrote, the ROM is already prepared for that, and all my ROMs are.
If you choose to try this ROM, I assume that you know what you are doing, and I am not responsible if you brick your phone.
Thanks for this rom. I was actually waiting to see our phone senseless and you did it. Installed this morning, RAM management seems to be great.
rockhardy said:
Thanks for this rom. I was actually waiting to see our phone senseless and you did it. Installed this morning, RAM management seems to be great.
Click to expand...
Click to collapse
Yes, the ram works well. I don't use google apps, and my top ram usage is around 280Mb, but average 180 Mb.
Now I'm preparing a version two, with some improvements.
You're welcome!
Well, i can see that Version2. Can you share what are the changes? I can see new camera, gallery app.
rockhardy said:
Well, i can see that Version2. Can you share what are the changes? I can see new camera, gallery app.
Click to expand...
Click to collapse
Well, I updated Launcher to last version, which is even better, changed camera, clock, gallery, and I added Personalize back for easy wallpaper change. I removed HTC locations which keeps to give install error, and I let only Google locations and maps.
I thought to change launcher, but after testing nova free, I came to conclusion that solo is better: low memory usage, more features (like unread counts for calls and sms - in nova these are paid); the only thing I notice in solo launcher that could make me to change it is that you can not fill a screen with shortcut because it will have lag, but you can put them in a folder instead, and open with one touch with no lag.
And I did a few other improvements.
By the way, in this ROM you can see bravia engine at work (no artifacts on white surfaces, better photo, images, videos), but also xloud - now in music listening I have to reduce volume to be confortable. But, best part is that the battery consumption is normal. When I tested those features on my other ROM with sense 5 skin, it drain 10% only in settings. I think, if I remove those parts from this ROM, the battery will last even longer, but they are to good to remove them.
Gr8 rom...! :thumbup: i found a small bug... When ever I try to use panorama, the camera app force closes. I don't use it.. Just pointed it if someone wants to use it. Other than that.. Loved your new rom. Great work.. Thanks for your support :beer:
Sent from my HTC T328W using xda premium
tsshady said:
Gr8 rom...! :thumbup: i found a small bug... When ever I try to use panorama, the camera app force closes. I don't use it.. Just pointed it if someone wants to use it. Other than that.. Loved your new rom. Great work.. Thanks for your support :beer:
Sent from my HTC T328W using xda premium
Click to expand...
Click to collapse
Thanks! I will release a patch to change camera app to sense5 camera - I didn't test panorama before.
Dear friends! Please check - Does this firmware synchronization of calendar events?
Slavik_BY said:
Dear friends! Please check - Does this firmware synchronization of calendar events?
Click to expand...
Click to collapse
I forgat to mention that, is the new GoogleCalendar, and it has some trouble with synchronization and new events. I will release until tomorrow a patch to replace this and camera. I will replace it with aCalendar free which is very good and will automate synchronize all events and birthdays from contacts.
I'm sorry for this bugs, I tried to match Jellybean appearance, and this calendar and camera was the closest thing, but seems to not be compatible with ICS.
Thank you for suggestions!
Ok, thank you for your amazing ROM ! GPS is work very-very quickly !!!!!!
Can u port Baidu roms gallery app?
Sent from my HTC T328W using xda premium
Dear Carliv ! I try your patch for odexed firmware, but it still remains a problem with the calendar...
Also, the app itself the calendar disappeared after applying the patch, tried to put an analogue of the store, but it did not solve the problem.
Slavik_BY said:
Dear Carliv ! I try your patch for odexed firmware, but it still remains a problem with the calendar...
Also, the app itself the calendar disappeared after applying the patch, tried to put an analogue of the store, but it did not solve the problem.
Click to expand...
Click to collapse
It's supposed to disapear, the calendar, because the new one it's called aCalendar. If you still have the icon, you should clear it manualy, as I said before. And in this new one, in menu you have multiple options, between them synchronize. But, with what do you want to synchronize? with google calendar online?
tsshady said:
Can u port Baidu roms gallery app?
Sent from my HTC T328W using xda premium
Click to expand...
Click to collapse
That will be a little bit hard to do. Baidu develop their ROM like an "ecosystem", almost all proprietary apps are interconected and have references in framework too. I took a look at java classes from Baidu framework and I found that. But you can try one from lewaos, they seems to be similar.
Yes, it is interested in a complete two-way synchronization of events with Google.
Unfortunately, as I understand it - aCalendar not support full synchronization with Google.
Slavik_BY said:
Yes, it is interested in a complete two-way synchronization of events with Google.
Click to expand...
Click to collapse
I understand. I can't test this calendar for that, but you can check this page http://android.stackexchange.com/questions/12823/synchronize-with-multiple-calendars. They show you how to syncronize a calendar with google, and even this one, aCalendar.
I hope it will help you.
--------------------------
Also, you can uninstall aCalendar with ESFile Manager as Root Explorer (don't forget to delete aCalendar.odex from system/app after that), and you can copy HTC Calendar, named Calendar.apk and CalendarProvider.apk from a stock ROM to /system/app, change permissions to rw--r--r--, reboot to recovery and delete dalvik cache, restart. That if stock calendar worked for you. I attached the files you need if you want to do that. I don't put widget too, because widget only work with sense.
Dear Carliv!
Is it possible that the standard calendar could work for your excellent firmware??
Slavik_BY said:
Dear Carliv!
Is it possible that the standard calendar could work for your excellent firmware??
Click to expand...
Click to collapse
Wait, I found out why it didn't worked. Download attached zip. Unpack and copy all those apps in system/app, clear dalvik cache in recovery, and it should work now with every calendar.
I don't use gapps, and that's the reason I cut that part from it.
Odexer
If you like to customize the ROM, and after that to odex it, it's easy.
- Moved to first post.
carliv said:
That will be a little bit hard to do. Baidu develop their ROM like an "ecosystem", almost all proprietary apps are interconected and have references in framework too. I took a look at java classes from Baidu framework and I found that. But you can try one from lewaos, they seems to be similar.
Click to expand...
Click to collapse
Thanks
Sent from my HTC T328W using xda premium

[Q&A][FAQ][SAC23] [N3][Sacs_Andro]FAQ, Q&A and User Guide for Sac23 ROM's

This is the first of many guides I will be posting and keeping up with.
It will be utilized for Q&A FAQ and HOW TO so we can keep the development thread for development purposes.
Post your questions and Myself or other knowledgeable users of Sac23 ROMS will answer as quickly as possible.
So ......
FAQ:
what do i do if its not booting on start up A- pull battery then restart.(IF YOU HAVE A REMOVABLE BATTERY)
after booting im getting a services have stopped wait or close A- pull the battery and restart.(IF YOU HAVE A REMOVABLE BATTERY)
the tweaks open then close help? A- need to deny super user for it then go in and change what u want then re enable superuser for it
how to install
install like u would any rom then wait for 2 min ( if wont boot )
pull battery and restart then you'll see optimizing apk's count down.(IF YOU HAVE A REMOVABLE BATTERY)
***Guys This Is A Port So remember it will have small glitches here and there but all in all should be stable ***​
For starters HOW TO INSTALL a ROM by SAC23
Installing with TWRP (View All Supported Devices>>> Find TWRP for your device):
Philz can be used and I will post instructions for it later https://www.mediafire.com/folder/qc3z1c59s8g03/PHILZ
This assumes that you ALREADY have TWRP Recovery installed on your phone and you know how to use it.
Download the ROM of choice...move it onto the EXT SD CARD.
VERY IMPORTANT>>> Move all music, pics, important data from internal storage to the ext SD card and/or to your pc, etc. because during this process, the internal will be completely erased.
Recommended Method to Flash SACS Custom ROMS using TWRP
Boot into TWRP
Select Wipe > Advanced Wipe
Select Dalvik, System, Data, Internal Storage, and Cache. Swipe to Wipe (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Select Format Data, Type YES, Press GO. (do this THREE TIMES)
Go back to previous Advanced Wipe screen.
Swipe to Factory Reset. (do this THREE TIMES)
Go back to MAIN menu and STOP HERE !!!!! READ NEXT STEP CAREFULLY....
[*]Select REBOOT INTO RECOVERY mode and Swipe to Install Super User. DO NOT REBOOT INTO SYSTEM!
[*]AFTER THE PHONE REBOOTS INTO RECOVERY:
NOW proceed with installing The ROM
Select Install Zip, Drill down to Sac23's Rom you want to flash, and Swipe to install.
Follow on screen instructions (if there are any).
When prompted, REBOOT SYSTEM.
THE FIRST BOOT WILL TAKE A MINIMUM OF 20 MINUTES..... SOME DEVICES EVEN LONGER...
.
.
HAVE PATIENCE
When the Home Screen appears and it is obvious that the install has completed, allow the phone to settle for another 10 minutes BEFORE you begin setting up your personal preferences and accounts.
If everything seems normal, set your phone up and profit.
IF IT WON'T BOOT....(IF YOU HAVE A REMOVABLE BATTERY)...try pulling battery and replacing battery then restart phone and you should see "Android Updating"
After setting up your personal info and you are now ready, the first thing you should always do after flashing any ROM is to go to settings, system updates, and refresh/update your PRL & PROFILE then reboot the phone. Second thing is go to settings, more networks, mobile networks, network mode, and select LTE/CDMA.
[LINKS] sac23_Norma_lollipop_port_ for N3 MIRRORS
OP HOST FILE LINK VER 2
MY 1st MIRROR HOST FILE LINK VER 2
MY 2nd MIRROR HOST FILE LINK VER 2 COMING SOON
VER 2 MD5 COMING SOON
OP HOST FILE LINK VER 1
MY 1st MIRROR HOST FILE LINK VER 1
MY 2nd MIRROR HOST FILE LINK VER 1
VER 1 MD5 7bf1e578eee4f63a938ad3a413b33962
saved 2
reserved for future use
saved 3
reserved for future use
saved 4
reserved for future use
saved 5
reserved for future use
thanks for this
Anyone know where I can get the nk4 modem?
http://forum.xda-developers.com/note-3-sprint/general/baseband-modem-nk4-odin-flashable-t2996639
Cowboysfan323 said:
Anyone know where I can get the nk4 modem?
Click to expand...
Click to collapse
Here is the nk4 tar file ready for odin..
https://www.dropbox.com/s/m8w3yj9y2ax7xe4/modem.bin?dl=0
Josephigloe said:
Here is the nk4 tar file ready for odin..
https://www.dropbox.com/s/m8w3yj9y2ax7xe4/modem.bin?dl=0
Click to expand...
Click to collapse
Thanks. i was still download the full rom just for the modem
Does Hotspot work on this?
Josephigloe said:
Here is the nk4 tar file ready for odin..
https://www.dropbox.com/s/m8w3yj9y2ax7xe4/modem.bin?dl=0
Click to expand...
Click to collapse
Ty.
here my findings :
- WIFI is not connecting after a full wipe.. not working after a dirty flash.
- The video on the OP shows the toolbox working but the icon is missing?
- On the pulldown under the date all of the text is Chinese
- when music is on , Sound management still have Chinese text on the pulldown notification
some other reports are :
- Calling other N3 sound is like a voice change
gabesir said:
here my findings :
- WIFI is not connecting after a full wipe.. not working after a dirty flash.
- The video on the OP shows the toolbox working but the icon is missing?
- On the pulldown under the date all of the text is Chinese
some other reports are :
- Calling other N3 sound is like a voice change
Click to expand...
Click to collapse
confirming all the above ( in case it helps )
also the settings button in pulldown only opens date / time settings ( unless for some reason that is normal for loli? )
Cowboysfan323 said:
Ty.
Click to expand...
Click to collapse
I don't know if you know but you don't flash in ap either you have to flash in like Csc I think it is.
gabesir said:
here my findings :
- WIFI is not connecting after a full wipe.. not working after a dirty flash.
- The video on the OP shows the toolbox working but the icon is missing?
- On the pulldown under the date all of the text is Chinese
- when music is on , Sound management still have Chinese text on the pulldown notification
some other reports are :
- Calling other N3 sound is like a voice change
Click to expand...
Click to collapse
Lol its Korean but agree with those issues. I also noticed when I reboot from recovery it gets stuck on the boot animation. Not always but most of the time.
---------- Post added at 11:42 AM ---------- Previous post was at 11:40 AM ----------
Dalek_Caan said:
confirming all the above ( in case it helps [emoji14])
also the settings button in pulldown only opens date / time settings ( unless for some reason that is normal for loli? )
Click to expand...
Click to collapse
Try tapping to the right a little more. It will open settings.
Edit: Well it was for me until I tried it again lol.
Josephigloe said:
I don't know if you know but you don't flash in ap either you have to flash in like Csc I think it is.
Click to expand...
Click to collapse
Didn't know that.
I've downloaded and flashed this rom multiple times. I cant get past the wifi on the initial setup
I set my ip to static ionnected to wifi and let me go through the setup
quoshon said:
I've downloaded and flashed this rom multiple times. I cant get past the wifi on the initial setup
Click to expand...
Click to collapse
Try turning the wifi off at the top right of the screen. It will skip the setup.
Ive also received a phone call and I was not able to answer it. Phone fc'd on me

[Q/A] [VM/Sprint/Boost] LG Tribute LS660/F60 Troubleshoot/Tips [ALL NON DEV PROBLEMS]

I'd like to keep all VM/Sprint/Boost LG LS660/F60 problem questions in here that do not refer to development, so we can keep the development thread a little more neat and on the right track.
Thank You Everyone!
ORIGINAL LG Tribute/F60 Root Method Here: http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772 By @Unjustified Dev, @jgkim, and @high247
LG Tribute/F60 One Click Root Method Here: http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951 Coded by @avicohh
Note: This root method works on other LG Phones, but this thread is to focus only on the LS660/F60. Thanks.
Also I'll add some of my findings for the LG Tribute that might of got lost in the other thread while we wait for questions.
Agreed.
Sent From This RIDICULOUS LG TRIBUTE
I'll Add Some Of My Findings Here As Well...
Camera sounds annoy me and I couldn't find any tweak, app, or anything to disable them on the LG's Camera, so I figured it out myself. I have wrote a guide and included a .zip with the files you need to switch.
- How to disable your LG Camera Sounds -
Found by high247 of XDA-Developers for the Virgin Mobile LG Tribute LG660.
-# 01. You are going to need to be ROOTED on your phone and have a Root Explorer. I personally use Root Browser from the Play Store.
And you'll need the .ogg files from this .zip file.
I've you are not ROOTED please check Unjustified Dev's guide here on how to do so.
Here: http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
-# 02. First move the .ogg files from this .zip to your phones SDcard.
cam_snap_0.ogg
camera_click.ogg
camstart.ogg
camstop.ogg
VideoRecord.ogg
(I've included backups of all the orginal .ogg's in Backup-ogg in the .zip. Just delete the .bak off the end and they are the orginal files in case you want to switch back.)
-# 03. Ok now on to disableing the sounds on your phones Camera (For whatever reasons you might what to do so. For me, they just annoy me)
Open your Root Explorer and go to your SDcard and multi-copy the .ogg's you put there.
Now navigate to System folder, click that,
now locate the Media folder, click that,
now locate the Audio folder, click that,
now locate the UI folder, click that, then once inside the UI folder click PASTE to copy the files there. It might be useful to delete the old ones before hand.
-# 04. Almost done, now you have to change the to .ogg file permissions to 0644 rw-r--r--
(If your not good with permissions, when you select permissions just make sure Read is checked in every box and Write is only checked on Owner, everything else unchecked.)
-# 05. ALL DONE. No need to reboot or anything, just go to your Camera and see that the annoying sounds are gone.
ENJOY!
HELP!
Still stuck in TWRP after the failed update, any ideas what the problem is?
JohnnyDX said:
Still stuck in TWRP after the failed update, any ideas what the problem is?
Click to expand...
Click to collapse
We need more detailed information to help, how did you get stuck for one?
I got the update for my Tribute and like a idiot I tried to install it but it just keeps booting into TWRP, I wiped the phone and than I restored a backup from my SD card that I had but it still reboots to TWRP, the backup installed successfully but it just keeps booting to TWRP, any ideas how to fix this? The backup has the TWRP recovery and root. I also tied the new rom and it still boots to TWRP.
What to Change that ugly color on your default LG Messaging App?
You need to install Xposed Framework on your rooted LS660/F60
1. Here is the Xposed Framework installer you need for G3 Tweakbox to work: http://dl.xposed.info/latest.apk
2. Now download G3 Tweakbox from the Play Store and install it:
https://play.google.com/store/apps/d...weaksbox&hl=en
3. Open Xposed Framework installer make sure the Xposed Framework is installed up to date and and then make sure you check the module for G3 Tweakbox and reboot your device before anything will work.
4. Now open G3 Tweakbox app, go to Messaging, scroll all the way to the bottom and you can change the color.
5. After you make changes Reboot your phone for them to take full effect. My messaging app now is Black.
And in this post I show what else I found that worked with G3 Tweakbox on the LS660, even some pictures : http://forum.xda-developers.com/showpost.php?p=59451127&postcount=766
NOTE: Not all tweak work. TRY AT YOUR OWN RISK.
JohnnyDX said:
I got the update for my Tribute and like a idiot I tried to install it but it just keeps booting into TWRP, I wiped the phone and than I restored a backup from my SD card that I had but it still reboots to TWRP, the backup installed successfully but it just keeps booting to TWRP, any ideas how to fix this? The backup has the TWRP recovery and root. I also tied the new rom and it still boots to TWRP.
Click to expand...
Click to collapse
You were on ZV4 right? I believe you have to flash the boot.img for ZV4 from TWRP and that will fix it. You might have to flash from fastboot though I forget, its almost 3am here and its been a long day.
Extract the boot.img from this .zip and try that.
Ok so for whatever reason I just could not get the damn OTA updates to stop re-downloading, even after doing what cpshelley2 said to do. My problem was update.zip kept re-downloading to /cache/ and then the notification would pop up to install. I ran the adb command cpshelley2 suggested and turned OTA off, made sure the update.zip was deleted, long pressed the notification clicked app info went to manager cleared all.
And it would just keep downloading over and over again, giving me the notification to install over and over again, so what I found was apps named Disable Service and Autorun Manager on the play store, they are free and for root, that fixed this for me.
DisableSevice Link: https://play.google.com/store/apps/details?id=cn.wq.disableservice&hl=en
AutorunManager Link: https://play.google.com/store/apps/details?id=com.rs.autorun&hl=en
**WARNING DO BE CAREFUL WHAT YOU ARE CHECKING AND UNCHECKING IN THESE PROGRAMS YOU COULD MESS SOMETHING UP!***
Open the Disable Services app, click where it says System near the top, then scroll down to Google Play services, click it, now scroll down almost all the way near the bottom and find SystemUpdateService then uncheck it will turn red.
Now open Autorun Manager and select Advance Mode, then in the top right click Settings, make sure Show System Entries and Enable System App Disable are both Checked, now find Google Play Services, click it to see a list of receivers, scroll down til you find com.google.android.gms.update.SystemUpdateService$Receiver and com.google.android.gms.update.SystemUpdateService$ActiveReceiver and com.google.android.gms.update.SystemUpdateService$SecertCodeReceiver ,then un-check them.
Now your done.
Reboot phone and update.zip will stop downloading in /cache/ (**delete it one last time if it is there still**) and you will stop being notified about the ZV5 update.
Hope that helps someone else too. Any questions feel free to ask and remember I'm on the LG LS660 Virgin Mobile.
Hidden Custom Lock Screen Wallpaper Feature
Oh and I have found how to make custom lock screens for everyone else with the LG Tribute, its hidden in the Photos app, download or take whatever picture, open it in Photos, click the 3 dots in the top right bringing down a menu, click Set as.. click More.. Set as Lock screen wallpaper. Crop and set!
Took me forever to find that. Could not find any info anywhere on the internet. lol
Hope that helps someone else too!
Hidden Menu
Dial this number below.
5689#*660#
That unlocks the Hidden Menu.
If you Dial ##3424# it will ask you for a Six Digit Service Code or known as a MSL Service Code. ( No known working codes have been found as of this posting. )
USE AT YOUR OWN RISK.
How to Access the Sprint OMADM Hidden Menu, No Root Needed.
Download Activity Launcher from the play store.
Open Activity Launcher and at the top click on Recent Activities at the top and switch it to All Activities... Once you did that scroll all the way down the list to Software Updates and click on it... A list will appear showing all the activities it does... Scroll down to Sprint OMADM Hidden Menu, there are 3 you can access though 4 say Sprint OMADMA Hidden Menu.
One will let you change the carrier branding.
Hope that helps you and let us know what happens if you try it please.
NOTE: You can Edit Chameleon Node options in the Sprint OMADM Hidden Menu com.lge.lgdmsclient.ui.test.SPROmadmHiddenMenu such as "Brand Name" in Edit Chameleon Node... Click it... Then click GET... If you have Virgin Mobile that should pop up under Brand Name... Click it and edit to say what you want... Then click SET and reboot phone to take effect.
CHANGE SETTINGS ATE YOUR OWN RISK AND NEVER FACTORY RESET OUTSIDE OF YOUR DEFAULT BRANDING OPTION.
And that my friends is mostly what I have found so far for our phones that are useful.
Now any questions feel free to ask and I'll answer ASAP. 3am here so I'm off to bed now. Night my friends.
Is there a working custom rom yet? I would love to get rid of the LG's default version and try CM12.
tstywall said:
Is there a working custom rom yet? I would love to get rid of the LG's default version and try CM12.
Click to expand...
Click to collapse
It is being tested by people and worked on by awesome @Unjustified Dev at this time. It is not being rushed and worked on to perfection. Make sure if you can donate to that man for his hard work and dedication!
Custom Recovery
How do install a custom recovery once rooted? Can I just install Flashify and then select "Download TWRP" from there, or is there something else I need to do?
You can use flashify if you have the zip for twrp
Edit: Here is the recovery Img
https://www.dropbox.com/s/irrdhovdy8fcxqi/recovery_bumped.img?dl=0
Flash it Via flashify and your good.
Sent From This RIDICULOUS LG TRIBUTE
Jmurphy8367 said:
You can use flashify if you have the zip for twrp
Sent From This RIDICULOUS LG TRIBUTE
Click to expand...
Click to collapse
Do you mean the .img from this post
http://forum.xda-developers.com/showpost.php?p=59311465&postcount=476
Edit:
Ok thanks. Is there any difference between the recovery_bumped.img you posted and the recovery.img I linked to?
No difference just uploaded nice to my dropbox.
Edit: Just use my dropbox one I know it works. Im still using my phone lol.
high247 said:
You were on ZV4 right? I believe you have to flash the boot.img for ZV4 from TWRP and that will fix it. You might have to flash from fastboot though I forget, its almost 3am here and its been a long day.
Extract the boot.img from this .zip and try that.
Click to expand...
Click to collapse
I flashed it via TWRP and it did not work.

[MOD][Debloat | Black Google bootanimation] Taintless

Going to try and keep this short, sweet, and to the point.
I modified and created a zip for personal use all the way back to my Nexus 5 days and through my N5X use. I like my ROMs extremely minimal. Removal of media files and applications that I didn't deem necessary to have. Even went as far and told the script to remove the stock launcher and replace it with Nova. This little guy worked wonders for me and saved me loads of time. My app drawer (on initial start up) only consisted of the essentials; phone, contacts, messaging, a file manager, and Google Play. Only leaving the rest to be downloaded as needed.
----------------
Since ROMs aren't abundant yet, I'm deciding to share my zip to those who actually want to remove system apps and not settle on them just being disabled. Also, to keep from going into a file manager after every OTA/update removing each app individually.
-----------------
Had to modify this little guy to work on our phones.. It took me a bit to figure out (of course, right? Nothing is 'straight forward' with these phones )
-----------------
1.) I use this for personal use but did take some consideration in other users so majority of what I don't use is still there, this list would be a lot longer (and yes, some apps are for my older phones and didn't feel like removing them from the script).
2.) I will not remove an app from the removal script - if you don't like whats being removed, don't flash the zip.
3.) If I have forgot something that comes on the phone that CAN be downloaded from the Play Store (and can not be uninstalled), let me know. I'll add it to the script.
4.) If apps you are currently using are in the removal script, don't worry. The script makes them a user app instead of a system app (in my case it did anyway).
What's removed: :highfive:
*Clock (Google)
*Maps
*YouTube
*DownloadProviderUi
*HTMLViewer
*Calendar (Google)
*Drive (Google)
*OmaDmclient
*Photos (Google)
*Gallery2
*BasicDreams
*Calendar (Google)
*GoogleJapaneseInput
*Chrome
*CMFileManager
*Email
*Exchange2
*Galaxy4
*GooglePinyinIME
*Music2 (Google Music)
*NoiseField
*OpenWnn
*PhaseBeam
*Gmail
*Videos (Google Movies)
*KoreanIME
*OpenDelta
*Launcher3
What's added: :victory:
*Google stock bootanimation (black background with no text!)
*1 additional ringtone
*2 additional notifications
*4 additional alarm ringtones
Installation: :silly:
1. backup your ROM (there is no 'undo' button, so if you want whatever you want back, do a restore)
2. flash through TWRP (do not wipe cache/dalvik unless you want to get stuck on the Google logo - a hard power reset solves that problem anyways)
3. reboot
Download: :good:
https://www.androidfilehost.com/?fid=889964283620778129
Thanks to @mauam for the awesome bootanimation!
- A picture of the animation (called Pixel 2) and reference to his thread can be found here:
https://forum.xda-developers.com/android/themes/alienware-t3721978
Again, you all are on XDA for a reason and know the risks of modifying your device in any sense. Since everyone else does this, I'll do it too:
I'm not responsible for your device.​
For those that are having force closing issues on certain apps, enabling immersive mode within apps seems to fix the problem..
Things you need:
You need Android Terminal Emulator in the Play Store or cmd on Windows
i would prefer to do this from a PC so you can copy and paste the commands, but it can be done with any terminal emulator also.
Step 1: Connect your phone to your PC enable USB debugging mode
Step2: Open up cmd in Windows or the emulator on your phone and copy/paste or type:
- adb shell
itll give you a '$'
then copy and paste or type:
- settings put global policy_control immersive.full=apps,-com.google.android.googlequicksearchbox
should enable automatically.
so a debloat script and replacing boot ani with a black one? ill give it ago next time i redo my phone lol (i already debloated and have that boot ani)
but nice little addition, i personally love removing bloat my last debloat script i dubbed 'The Purge" lol
Sounds good to me and I hate bloat! thanks for the work!
Caution.,,
This breaks Fi app ... sort of.
the app wont run after zip. uninstall, reload from app store... still cant run app... app prompts to activate phone.. activate runs and app starts to work.
Same with "google" app (the default app that show when you swipe left from home screen.
Gmail too....
elliwigy said:
so a debloat script and replacing boot ani with a black one? ill give it ago next time i redo my phone lol (i already debloated and have that boot ani)
but nice little addition, i personally love removing bloat my last debloat script i dubbed 'The Purge" lol
Click to expand...
Click to collapse
Yep, that's pretty much what it does! The Purge hahah nice name!!
galaxys said:
Sounds good to me and I hate bloat! thanks for the work!
Click to expand...
Click to collapse
Absolutely.. Hope it works out for you.
imaverik said:
This breaks Fi app ... sort of.
the app wont run after zip. uninstall, reload from app store... still cant run app... app prompts to activate phone.. activate runs and app starts to work.
Same with "google" app (the default app that show when you swipe left from home screen.
Gmail too....
Click to expand...
Click to collapse
I don't run the Google Fi app, nor did I even touch anything related to Fi..
My Google app works as intended, and I redownloaded gmail, and that works too.. Idk what could be the issue on your end..
elliwigy said:
so a debloat script and replacing boot ani with a black one? ill give it ago next time i redo my phone lol (i already debloated and have that boot ani)
but nice little addition, i personally love removing bloat my last debloat script i dubbed 'The Purge" lol
Click to expand...
Click to collapse
I think I remember that script. Was that for the S5? ?
Badger50 said:
I think I remember that script. Was that for the S5? ?
Click to expand...
Click to collapse
i believe so haha too lazy to look it up
Those this work with the January update? For some reason when I flash it my device becomes corrupted. I'm using twrp 3.2.1 if that helps
castano22 said:
Those this work with the January update? For some reason when I flash it my device becomes corrupted. I'm using twrp 3.2.1 if that helps
Click to expand...
Click to collapse
Version/update doesn't matter..
Corrupted as in how?
I still use twrp 3.1.1. Beta 2
Corrupted as in it won't let me boot up into the OS. It's with other mods too
So far I've received an issue from a user on here (youll be able to read their issue on the last page) and i assume its user error due to me not having any issues at all..
My question is - has anyone else tried this script with complete success?? Given the 'thanks' i received, im assuming (again lol) that its working fine. In my experience on XDA, people only comment on whats wrong, and keep quiet when things are running as they should.. I'm now asking to voice your success just for reassurance for me
let me know guys, thanks! :good::fingers-crossed:
Just wanted to confirm that the debloat script works on the Feb update.. Just did it myself :highfive:
However, I did have a couple force closes on the Google app and Twitter (weird) -- after some testing, i got it working by enabling 'settings put global policy_control immersive.full=apps,-com.google.android.googlequicksearchbox' again
After I enabled that again, everything functions fine. :good:
Maybe this is needed for some apps that force close after flashing this debloat script (if you like immersive mode in apps)..
I'll post instructions in the 2nd post on the first page
Hey, thanks for this! Any chance of an update to April release?
elliwigy said:
so a debloat script and replacing boot ani with a black one? ill give it ago next time i redo my phone lol (i already debloated and have that boot ani)
but nice little addition, i personally love removing bloat my last debloat script i dubbed 'The Purge" lol
Click to expand...
Click to collapse
do you debloat using TitaniumBackup? Last time I tried that, I got stuck in a bootloop
dr_rick13 said:
do you debloat using TitaniumBackup? Last time I tried that, I got stuck in a bootloop
Click to expand...
Click to collapse
Yeah I find that happens too. Plus despite having busybox titanium isn't even deleting system apps anymore, they are still there after reboot. So for now I stick to freezing...

Categories

Resources