how to install Custom recovery and root pocket neo without PC - Samsung Galaxy Pocket Neo S5310

First to install Custom Recovery
first we need temporary root for installing recovery ---> install this app and root first http://www.datafilehost.com/d/f9d5b490
1.download rashr app http://www16.zippyshare.com/v/36593548/file.html and install it to your phone
2.get the recovery which you like from here ------> http://forum.xda-developers.com/pocket-neo/development/holding-recoveries-kernel-samsung-t2836487
3.extract the recovery.tar.md5 and get the recovery.img out
4.open file explorer and click recovery.img which you extracted before and a screen will pop up click rashr and apply just once and in the app click flash recovery
5.then reboot
END OF INSTALLING RECOVERY SUCCESSFULLY
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
Rooting
1.download the package from here -----> https://docs.google.com/file/d/0B9B_MYcrSzXOSjVWMEVidGp1SWs/edit?usp=sharing and place it on your SDcrd
2.reboot your phone to recovery
3.click install zip from SDcard
4.select root_super.zip package
5.reboot enjoy
ENJOY WITH YOUR ROOTED POCKET NEO
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-

Extract ? Using what to extract?
Sent from my GT-S5310 using XDA Free mobile app
---------- Post added at 03:53 AM ---------- Previous post was at 03:43 AM ----------
Owh wait my bad. I found the solution. Thanks
Sent from my GT-S5310 using XDA Free mobile app

karthick mostwanted said:
First to install Custom Recovery
first we need temporary root for installing recovery ---> install this app and root first http://www.datafilehost.com/d/f9d5b490
1.download rashr app http://www16.zippyshare.com/v/36593548/file.html and install it to your phone
2.get the recovery which you like from here ------> http://forum.xda-developers.com/pocket-neo/development/holding-recoveries-kernel-samsung-t2836487
3.extract the recovery.tar.md5 and get the recovery.img out
4.open file explorer and click recovery.img which you extracted before and a screen will pop up click rashr and apply just once and in the app click flash recovery
5.then reboot
END OF INSTALLING RECOVERY SUCCESSFULLY
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
Rooting
1.download the package from here -----> https://docs.google.com/file/d/0B9B_MYcrSzXOSjVWMEVidGp1SWs/edit?usp=sharing and place it on your SDcrd
2.reboot your phone to recovery
3.click install zip from SDcard
4.select root_super.zip package
5.reboot enjoy
ENJOY WITH YOUR ROOTED POCKET NEO
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
Click to expand...
Click to collapse
support in s5310n 4.4.2 ????

To extract, just rename the file by removing the "md5", it will stay in "zip", and only then can extract the file "img" that will be inside the zipped file.

he TWRP recovery touch feature does not work and phone won't start every restart it goes into recovery. will have to do something with odin or something. TWRP bricked the phone.

VIRUS Load
---------- Post added at 13:19 ---------- Previous post was at 13:14 ----------
[/COLOR]First to install Custom Recovery
first we need temporary root for installing recovery ---> install this app and root first http://www.datafilehost.com/d/f9d5b490
1.download rashr app http://www16.zippyshare.com/v/36593548/file.html and install it to your phone
2.get the recovery which you like from here ------> http://forum.xda-developers.com/pock...msung-t2836487
3.extract the recovery.tar.md5 and get the recovery.img out
4.open file explorer and click recovery.img which you extracted before and a screen will pop up click rashr and apply just once and in the app click flash recovery
5.then reboot
END OF INSTALLING RECOVERY SUCCESSFULLY
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-
Nice that your links all give files that are viruses. :good:

Related

[Q] How to flash KA02 SSpeed rom to Sola

Can someone post step by step tutorial how to flash SSpeed rom to Xperia Sola via fastboot.
I dont understand where to but the zip file? What comman to write in CMD and so on
HELP needed!
just put the zip file on your sd card, boot into recovery, select instal zip frim sd card, navigate to your zip file, select it, tap install it!, then the aroma installer will guide you trough the process
Sent from my LT26i using xda app-developers app
JoelChrist_ said:
just put the zip file on your sd card, boot into recovery, select instal zip frim sd card, navigate to your zip file, select it, tap install it!, then the aroma installer will guide you trough the process
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
??? there is no recovery (CWM) for the Sola!
stalvekio said:
Can someone post step by step tutorial how to flash SSpeed rom to Xperia Sola via fastboot.
I dont understand where to but the zip file? What comman to write in CMD and so on
HELP needed!
Click to expand...
Click to collapse
Everthing you need is here ;-)
http://forum.xda-developers.com/showthread.php?t=1526866
I have managed to flash the kernel and the SSpeed ROM. But now its often rebooting and my internal memrory is some how 100% full (.
What next?

How to root A116 and install cwm recovery

Today I am sharing How to root using framaroot app
First You will need some stuffs.
1) Framaroot app
http://forum.xda-developers.com/attachment.php?attachmentid=2784451&d=1402084843
2) Cwm recovery
http://www.mediafire.com/?hk5guk5f8a0xu4x
3) Mobile Uncle tools
https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&feature=nav_result
Procedure-
1)After downloading framaroot app place it in your sd card
2) Now go to setting>security and select Unknown sources
3) Now install framaroot app by using any file manager
4) Open framaroot app and select
Install Supersu and then select Boromir
5) Now go to playstore and search for Supersu app and install it
After opening it may ask to update supersu.bin, select Yes and then Normal
6) Reboot your phone
7) Now install Root Checker app from playstore and verify for root permissions
8) If it says yes
Then Your phone is now Rooted
Your phone has no boundations
9) Now download MTK uncle Tools from above link
10)Install it and open it and after opening a popup will appear asking for root permission Select Grant
11) Now take the recovery you had downloaded from above link and rename it as "recovery.img" without("") and place it in root (out of every folder) of your sd card.
12) Now open MTK Uncle tools and select Update Recovery.
Search for the file you doenloaded and renamed and select it and confirm.
After that it will ask to reboot your phone into recovery mode hit yes.
It will open cwm recovery
Now your phone is rooted and CWM recovery is installed. :angel:
Note- You can also take any recovery rather than cwm but it should be made for your phone.
Note- I AM NOT RESPONSIBLE FOR ANYTHING HAPPENS IN YOUR PHONE OR IT BRICKS IT CAN BE YOUR FAULT.
DO IT ON YOUR RESPONSIBILITIES
HIT THANKS IF YOU LIKED MY WORK
IT WILL MOTIVATE ME
Sent from my A110 using Tapatalk pro
avinash130413 said:
Today I am sharing How to root using framaroot app
First You will need some stuffs.
1) Framaroot app
http://forum.xda-developers.com/attachment.php?attachmentid=2784451&d=1402084843
2) Cwm recovery
http://www.mediafire.com/?hk5guk5f8a0xu4x
3) Mobile Uncle tools
https://play.google.com/store/apps/details?id=com.mobileuncle.toolbox&feature=nav_result
Procedure-
1)After downloading framaroot app place it in your sd card
2) Now go to setting>security and select Unknown sources
3) Now install framaroot app by using any file manager
4) Open framaroot app and select
Install Supersu and then select Boromir
5) Now go to playstore and search for Supersu app and install it
After opening it may ask to update supersu.bin, select Yes and then Normal
6) Reboot your phone
7) Now install Root Checker app from playstore and verify for root permissions
8) If it says yes
Then Your phone is now Rooted
Your phone has no boundations
9) Now download MTK uncle Tools from above link
10)Install it and open it and after opening a popup will appear asking for root permission Select Grant
11) Now take the recovery you had downloaded from above link and rename it as "recovery.img" without("") and place it in root (out of every folder) of your sd card.
12) Now open MTK Uncle tools and select Update Recovery.
Search for the file you doenloaded and renamed and select it and confirm.
After that it will ask to reboot your phone into recovery mode hit yes.
It will open cwm recovery
Now your phone is rooted and CWM recovery is installed. :angel:
Note- You can also take any recovery rather than cwm but it should be made for your phone.
Note- I AM NOT RESPONSIBLE FOR ANYTHING HAPPENS IN YOUR PHONE OR IT BRICKS IT CAN BE YOUR FAULT.
DO IT ON YOUR RESPONSIBILITIES
HIT THANKS IF YOU LIKED MY WORK
IT WILL MOTIVATE ME
Sent from my A110 using Tapatalk pro
Click to expand...
Click to collapse
Is it working ???
Yes
Sent from my A110 using Tapatalk pro

[Guide] Recovery Porting For MTK Phones

Its about porting Recovery easily...in 15 minutes...
Ok lets start......
_________________________________
Requirments:
1.Apktools letast version (Search on xda or google)
2.NP++ for mobile (Search on google)
3.Root Explorer or any Good file explorer (Search on google)
4.Recovery tools (Search on google)
_________________________________
Step:1
Frist take your stock boot.img,stock recovery and any other recovery like CWM or CTR (Without
TWRP)
Now put them in safe folder on your sdcard or storge and go to apktools...Unpack boot.img in a new folder then unpack Stock recovery in another folder and unpack your cwm or CTR recovery in Another folder...
All done!Now unpack your recovery in a new folder
(whitch you want to port)...
_________________________________
Step:2
Now go to your unpacked boot.img and go to
ramdisk folder then copy these files and paste it to your recovery (whitch you want to port)
1.meta_init.modem.rc
2.meta_init.project.rc
3.meta_init.rc
Done!
Now go to your unpacked stock recovery and copy ( #Karnel ) and paste it to your unpacked recovery (Whitch you want to port).Then again go to unpacked stock recovery and go to ramdisk...then copy these files and paste them in you unpacked recovery (whitch you want to port) /ramdisk and replace all...
1.fstab
2.ueventd.rc
3.ueventd.goldfish.rc.
Done!
Now go to your unpacked CWM or CTR and go to ramdisk/etc and copy ( recovery.fstab ) and paste it to you unpacked recovery (whitch you want to port) /ramdisk/etc and replace....
Done!Now go to your unpacked recovery (whitch you want to port) then go to ramdisk and open default.prop and edit this as you edit build.prop of a custom rom...
All Done!
_________________________________
Finel step :
Now go to your unpacked recovery (whitch you want to port) and click on ramdisk then repack it...done!
now you will see your new recovery named (new.img)...
Now open recovery tools and flash your new recovery...
And see magic or you can make a cwm flashable recovery.zip ...
Just download this ( http://www.mediafire.com/?yoch4142rowjkbj ) and extract it on a folder.
then renamed your new recovery file to recocery.img.
Now copy it and paste in these folder where you extracted that zip and replaced it.
Done!
now create a zip and go to recovery mood and flash it...
_________________________________
N.B. ->TWRP porting method is different...i will
give you later... Sometimes your new recovery
may not work...if its not work then try again and
be patient...
_________________________________
I hope this post was helpfull if think so and
successed to port your new recovery then dont
forget to give me some credits dude...
_________________________________
This is for mobile and those who doesn't have a PC. Sorry for bad English.
.
Credits to Md.Shafikul.islam for writing this
Please the mediafire download isn't working can you upload it to another download server like devhost.... Thanks..... it keeps saying download error
Sent from my TECNO M7 using XDA Free mobile app
everything is OK bro
Da Rex said:
Please the mediafire download isn't working can you upload it to another download server like devhost.... Thanks..... it keeps saying download error
Sent from my TECNO M7 using XDA Free mobile app
Click to expand...
Click to collapse
link is working bro. try again. by the way, I will mirror the link when I can. keep connected. thank you.

Root Your Galaxy Grand 2 [SM-G7102] [ms013g] Without PC. Easy, Safe.

Code:
/*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any doubts about rooting
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There are lot of Guides Available for Rooting Grand 2. But I'm sharing this for the people who don't have a pc and want their phone rooted safe.
I have tried this several times, and I'm sure it is safe. Eventhough there is a chance of soft brick.
Note: This Guide is only for Samsung Galaxy Grand 2 SM-G7102 which is running on Kitkat 4.4.2 stock Rom. You can try on other devices on your own risk.
*--------------------------*
DOWNLOADS
For Method - 1
Kingroot
SuperSu-Me
For Method - 2
Flashify
Rashr (optional)
SuperSu v2.52 Beta
Recoveries
CWM by Mukulsoni
TWRP by Aapav
Philz Touch by Ali.filth
*--------------------------*
Method - 1
1. Download Kingroot App and Root your phone with it.
(Kingroot is not a safe app and it is highly vulnerable, Hackers can easily hack your phone when using Kingroot as superuser app. Eventhough with kingroot you can easily root your phone without pc)
Download Kingroot
Don't know how to root with Kingroot?
*Download and install the KingRoot app as you would do with any normal app.
"Launch the KingRoot app from the app drawer.
*A 'Try to Root' button will appear at the bottom of the screen. Just tap this button and let the rooting process complete.
*After the device is rooted, a success message will appear on the screen.
Done!
Click to expand...
Click to collapse
2. Reboot (important)
3. Download 'Supersu-me' App.
See this thread to know more
or Buy Pro Version
Buy or Google it [emoji14] it's against xda rules providing free download link for a premium app.
note: SuperSu-me Please App Developed by XDA Devolopers. They decided as a team to take on the challenge and come out with this script that will completely remove all of the KingRoot applications and put SuperSU on our device.
all credits goes to them.
4. Install SuperSu-Me.. open it, it will ask for root permission, Grant it.
5. Then press Blue Button
It will take a while. The app will automatically remove Kingroot file from our phone and replace Kingroot with supersu.
6. Reboot
Enjoy having root privileges
Note: if the Kingroot app still remains after all these steps, uninstall it manually.
In some cases, you may lose root privileges after using supersume. In such cases, open SuperSu(not Supersu-me) settings> full unroot. Then Repeat all the steps again.
After doing all these steps, you can use flashify app to flash custom Recoveries and other stuffs. But Read some guides before using these apps
Flashify : https://play.google.com/store/apps/details?id=com.cgollner.flashify
Rashr (An alternate app for flashing Recoveries and zip files as same as flashify) :-
Play store link : https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Note : These apps could brick your device if you use it wrong. so careful.
- RECOVERIES -
CWM
TWRP
Philz Touch
I personally recommend CWM for beginners.
*-------------------------------*
Method - 2
This method is more complicated
Note - I haven't tried this step on Grand 2 kitkat. But tried on several other devices. every time it worked. it should work on grand 2 stock firmware too.
1. Download Kingroot App and Root your phone with it.
2. Download Flashify from playstore
Link: https://play.google.com/store/apps/details?id=com.cgollner.flashify
3. Download a recovery (links are mentioned above)
*I recommend twrp for this method.
4. Download Supersu 2.52 flashable zip
link: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
5. Open flashify, it will ask for root permission. Grant it.
We can flash recovery with flashify using 2 methods. they are
(i) flashing Zip file method
(ii)flashing img file method
only try 2nd method if 1st fails
first we try (i) flashing Zip file method
'Boot Image, Recovery Image and Zip File' are the three main options you find in flashify.
Select Zip file option > choose a file > find Recovery.zip(recovery flashable zip file ) from the folder you downloaded and select it > Yup! (ofcourse Yup! is an option lol) > Copy First > Reboot.
if you have done all steps properly, it will automatically reboot to recovery and flash zip file which will replace the stock recovery.
some times Zip file method fails, in such case we can try (ii)flashing img file method.
first of all go to file manager and find the recovery zip file you downloaded, extract it. inside the extracted folder, you will find a file named recovery.img
open flashify > Recovery Image > Choose a file (browse and find recovery.img file you extracted and then select it) > Normal Android Way > Yup! > Reboot
Phone will reboot.
after recovery has flashed using flashify, open flashify again > touch the 3dot menu on the top right corner > select Reboot Recovery. phone will reboot to recovery. from there select Install zip and flash recovery.zip again (because recoveries that flashed through flashify are not at all stable, sometimes it fails to boot manually using power+volumeup key combinations. so you should flash recovery, from recovery using flashable zip file) see some guides how to flash zip file using recovery.
6. Reboot to Recovery
You can boot to recovery using power+volumeup key combinations.
OR
open flashify> 3dot menu > Reboot Recovery
7. Install Zip > BETA-SuperSU-v2.52.zip (supersu file you have dowloaded first)
it will take a while
Supersu Beta 2.52 version have scripts included to remove Kingroot automatically. Flashing BETA-SuperSU-v2.52.zip will automatically remove Kingroot and replaces with supersu
After flashing finished, reboot the phone and open Supersu. See whether it working properly. if no error message shown, You have rooted your phone successfully.
Post your doubts and comments here.
hit thanks button if helped.
Nice post but I am already use this thanx dear
Sent from my SM-G7102 using Tapatalk
JAMESAMEES said:
Nice post but I am already use this thanx dear
Sent from my SM-G7102 using Tapatalk
Click to expand...
Click to collapse
hit thanks button then ??
yub
JitDevHacker said:
hit thanks button then
Click to expand...
Click to collapse
you deserve it
digitman xxx said:
you deserve it
Click to expand...
Click to collapse
lol
you are distributing apk for a paid app,distributing cracked apk for paid apps is strictly prohibited on xda.
Requesting you to remove it asap.
neonkat said:
you are distributing apk for a paid app,distributing cracked apk for paid apps is strictly prohibited on xda.
Requesting you to remove it asap.
Click to expand...
Click to collapse
Removed
EDIT: Method 2 added to post #1
JitDevHacker said:
EDIT: Method 2 added to post #1
Click to expand...
Click to collapse
Rooting your device through king root is safe and easy one
aryalmuskan17 said:
Rooting your device through king root is safe and easy one
Click to expand...
Click to collapse
not safe,that makes your device vulnerable.
aryalmuskan17 said:
Rooting your device through king root is safe and easy one
Click to expand...
Click to collapse
Easy to Root without pc. but vulnerable. flash supersu v2.52 beta as long as possible after rooted with Kingroot.
neonkat said:
not safe,that makes your device vulnerable.
Click to expand...
Click to collapse
what is vulnerable??
aryalmuskan17 said:
what is vulnerable??
Click to expand...
Click to collapse
Kingroot is Vulnerable. you should replace Kingroot with supersu
JitDevHacker said:
Code:
/*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any doubts about rooting
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
There are lot of Guides Available for Rooting Grand 2. But I'm sharing this for the people who don't have a pc and want their phone rooted safe.
I have tried this several times, and I'm sure it is safe. Eventhough there is a chance of soft brick.
Note: This Guide is only for Samsung Galaxy Grand 2 SM-G7102 which is running on Kitkat 4.4.2 stock Rom. You can try on other devices on your own risk.
*--------------------------*
DOWNLOADS
For Method - 1
Kingroot
SuperSu-Me
For Method - 2
Flashify
Rashr (optional)
SuperSu v2.52 Beta
Recoveries
CWM by Mukulsoni
TWRP by Aapav
Philz Touch by Ali.filth
*--------------------------*
Method - 1
1. Download Kingroot App and Root your phone with it.
(Kingroot is not a safe app and it is highly vulnerable, Hackers can easily hack your phone when using Kingroot as superuser app. Eventhough with kingroot you can easily root your phone without pc)
Download Kingroot
2. Reboot (important)
3. Download 'Supersu-me' App.
See this thread to know more
or Buy Pro Version
Buy or Google it [emoji14] it's against xda rules providing free download link for a premium app.
note: SuperSu-me Please App Developed by XDA Devolopers. They decided as a team to take on the challenge and come out with this script that will completely remove all of the KingRoot applications and put SuperSU on our device.
all credits goes to them.
4. Install SuperSu-Me.. open it, it will ask for root permission, Grant it.
5. Then press Blue Button
It will take a while. The app will automatically remove Kingroot file from our phone and replace Kingroot with supersu.
6. Reboot
Enjoy having root privileges
Note: if the Kingroot app still remains after all these steps, uninstall it manually.
In some cases, you may lose root privileges after using supersume. In such cases, open SuperSu(not Supersu-me) settings> full unroot. Then Repeat all the steps again.
After doing all these steps, you can use flashify app to flash custom Recoveries and other stuffs. But Read some guides before using these apps
Flashify : https://play.google.com/store/apps/details?id=com.cgollner.flashify
Rashr (An alternate app for flashing Recoveries and zip files as same as flashify) :-
Play store link : https://play.google.com/store/apps/details?id=de.mkrtchyan.recoverytools
Note : These apps could brick your device if you use it wrong. so careful.
- RECOVERIES -
CWM
TWRP
Philz Touch
I personally recommend CWM for beginners.
*-------------------------------*
Method - 2
This method is more complicated
Note - I haven't tried this step on Grand 2 kitkat. But tried on several other devices. every time it worked. it should work on grand 2 stock firmware too.
1. Download Kingroot App and Root your phone with it.
2. Download Flashify from playstore
Link: https://play.google.com/store/apps/details?id=com.cgollner.flashify
3. Download a recovery (links are mentioned above)
*I recommend twrp for this method.
4. Download Supersu 2.52 flashable zip
link: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
5. Open flashify, it will ask for root permission. Grant it.
We can flash recovery with flashify using 2 methods. they are
(i) flashing Zip file method
(ii)flashing img file method
only try 2nd method if 1st fails
first we try (i) flashing Zip file method
'Boot Image, Recovery Image and Zip File' are the three main options you find in flashify.
Select Zip file option > choose a file > find Recovery.zip(recovery flashable zip file ) from the folder you downloaded and select it > Yup! (ofcourse Yup! is an option lol) > Copy First > Reboot.
if you have done all steps properly, it will automatically reboot to recovery and flash zip file which will replace the stock recovery.
some times Zip file method fails, in such case we can try (ii)flashing img file method.
first of all go to file manager and find the recovery zip file you downloaded, extract it. inside the extracted folder, you will find a file named recovery.img
open flashify > Recovery Image > Choose a file (browse and find recovery.img file you extracted and then select it) > Normal Android Way > Yup! > Reboot
Phone will reboot.
after recovery has flashed using flashify, open flashify again > touch the 3dot menu on the top right corner > select Reboot Recovery. phone will reboot to recovery. from there select Install zip and flash recovery.zip again (because recoveries that flashed through flashify are not at all stable, sometimes it fails to boot manually using power+volumeup key combinations. so you should flash recovery, from recovery using flashable zip file) see some guides how to flash zip file using recovery.
6. Reboot to Recovery
You can boot to recovery using power+volumeup key combinations.
OR
open flashify> 3dot menu > Reboot Recovery
7. Install Zip > BETA-SuperSU-v2.52.zip (supersu file you have dowloaded first)
it will take a while
Supersu Beta 2.52 version have scripts included to remove Kingroot automatically. Flashing BETA-SuperSU-v2.52.zip will automatically remove Kingroot and replaces with supersu
After flashing finished, reboot the phone and open Supersu. See whether it working properly. if no error message shown, You have rooted your phone successfully.
Post your doubts and comments here.
hit thanks button if helped.
Click to expand...
Click to collapse
I have successfully Root. But run SuperSU to uninstall the failed kingroot
I installed 4.6.5 kingroot
Drthanh77 said:
I have successfully Root. But run SuperSU to uninstall the failed kingroot
I installed 4.6.5 kingroot
Click to expand...
Click to collapse
Try Method 2. Flash SuperSu v2.52 using recovery
@Drthanh77 Don't qoute post #1 please. but feel free to ask your doubts.
Sent from my SM-G7102 using Tapatalk
JitDevHacker said:
@Drthanh77 Don't qoute post #1 please. but feel free to ask your doubts.
Sent from my SM-G7102 using Tapatalk
Click to expand...
Click to collapse
Thanks You verry much
despite a successful installation with SuperSU-v2.55.zip. But SuperSU-v2.55 remain inactive and not removed by Kingroot
Drthanh77 said:
Thanks You verry much
despite a successful installation with SuperSU-v2.55.zip. But SuperSU-v2.55 remain inactive and not removed by Kingroot
Click to expand...
Click to collapse
Use supersu-me
Sent from my SM-G7102 using Tapatalk
How
---------- Post added at 09:00 PM ---------- Previous post was at 08:58 PM ----------
I got a message to update su binary after I installed super sume, what could be wrong?
If u have problem with supersu. Delete and remove root from kingroot and then flash the supersu zip

Help me to root coolpad mega 3

Devs,
Could any one dev help me to root and install custom recovery for my coolpad mega 3. It has MT 6737 chip android 6.0.
I would also like the to know it. There's no option to activate Root access in Developer menu directly in the phone. So probably the way is only via USB.
There is no method to root coolpad mega 3 with twrp or any custom recovery.
Hi friend, i have also coolpad mega 3 and i am writing this in my rooted coolpad device. So the question is , how i got root access. Actually rooting coolpad mega 3 was like winning god for me but fortunately i became sucessful in rooting this bloody device.
XDA community doesn't helped me in rooting my COOLPAD MEGA 3. I have rooted it with my own idea and brain.
So the steps are:
1. Download magisk manager latest version and install it in your coolpad mega 3.
2. Download stock firmware of your device.
3. Download vcom drivers and YDGP TOOL With SP FLASH TOOL. Remember all should be of latest version.
4.Install vcom drivers and after that extract your firmware in pc. It will be in the form of .CPB file.
5.Install YDGP TOOL and remember its installation folder. Now launch YDGP tool and on main screen click on select firmware then locate your firmware in pc then choose it. It will start verifying .CPB file and after that it will decompress .CPB file in the installation folder of YDGP TOOL under download folder.
6. Copy your boot.img from YDGP download folder to your coolpad phone storage. Then open magisk manager app and click on install ,then select the boot.img located to the place where you have copied it in phone storage. Click on select and then wait for the process. After that rename and save the patched boot.img to your phone storage. Now open pc and copy patched boot.img from phone storage to pc.
7.Now install and launch SP flash tool and login as developer. Switch of your Coolpad Mega 3.
8.Before above step you have to make a new folder in your pc which will contain scatter file with boot.img. Make a new folder in pc and name it coolpad3 . Go to YDGP INSTALLATION folder and open Download folder .IN Download folder open COOLPAD3053I folder. There will be a file named MtScatter.Txt.Copy it to coolpad3 folder. Also copy the patched boot.img to coolpad3.
Remember that scatter file and boot.img should be in same folder.
9.Follow step 7 and after that connect your switched off coolpadmega 3 to pc with the help of a good branded USB CABLE. Click on select scatter file in SP flashtool then it will load it and after that it will show you a menu having boot with a tick sign. Do not tick any other option. After that click on download button. If you are confused then you can search on google how to flash mediatek phones with SP flash tool.
10.It will flash boot.img patched with magisk to your phone. CONGRATS AFTER REBOOTING YOUR DEVICE YOU WILL HAVE A ROOTED COOLPAD MEGA 3.
YOU CAN CHECK IT BY MAGISK MANAGER THAT YOU HAVE INSTALLED FOR PATCHING BOOT.IMG .IF
both the option show install with a green tick in magisk manager that means your phone have been rooted.????
You can also check root status by installing rootchecker from playstore.
REMemBER THIS METHOD WILL WORK 100%.:good:
---------- Post added at 08:46 AM ---------- Previous post was at 08:37 AM ----------
XDA COMMUNITY WERE NOT ABLE TO ROOT COOLPAD MEGA 3. BECAUSE I HAVE ASKED HOW TO ROOT COOLPAD MEGA 3 TO MANY SENIOR MEMBER BUT THE ANSWER WERE EMPTY.
BUT AFTER THIS XDA COMMUNITY WILL KNOW HOW TO ROOT COOLPAD MEGA 3. I WOULD LIKE TO ASK XDA SENIOR DEVELOPERS "CAN THEY MAKE CUSTOM RECOVERY LIKE TWRP OR ANY OTHER " FOR COOLPAD MEGA 3 specially. IF YES THEN THEY SHOULD RELEASE CUSTOM RECOVERY FOR COOLPAD MEGA 3.
I AM WAITING. ???
step2?
from where do i download stick firmware. (step 2?
rohitwindows7 said:
from where do i download stick firmware. (step 2?
Click to expand...
Click to collapse
From google
Search for coolpad mega 3 stock firmware
CoolPadToolkit can be helpful to make root partly.
I needed to uninstall a lot of bundled apps so I used Root method by Magisk integrated in CoolpadToolkit.
Then I used KingRoot to delete apps.
Coolpad Toolkit
the only tool you want
coolpadtoolkit.wordpress.com

Categories

Resources