HERE IS TWRP FOR KITKAT
NOTICE
HTML:
YOUR WARRANTY IS NOW VOID
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE
DOWNLOADS
https://mega.co.nz/#!DM9kBJJA!baKTQHp4KmcYRjV98PWHOlYFjegA_LjiqkVMBaxrSQ4
INSTALLATION PROCESS:
1. CONNECT YOUR DEVICE TO A COMPUTER WHICH HAS ODIN
2. OPEN ODIN ADD THE DOWNLOADED FILE IN AP(PDA) SECTION
3. CLICK ON START(BEFORE THAT UNCHECK AUTOREBOOT)
4. WHEN INSTALLATION COMPLETES AND ODIN WRITES RESET THEN DISSCONNECT YOUR DEVICE
AND TAKE OFF THE BATTERY
5. BOOT TO RECOVERY USING THREE BUTTON METHOD(VOL UP+ HOME+ POWER)
6. CLEAR CACHE AND REBOOT
7. ITS DONE!!!!!!!ENJOY!!!!!
IT WOULD BE VERY GRATEFUL OF YOU IF YOU HIT THE THANKS BUTTON AND APPRECIATE THE WORK IF THIS HELPED:good::fingers-crossed:
PLEASE TEST IT AND TELL ABOUT BUGS
XDA:DevDB Information
TWRP, Tool/Utility for the Samsung Galaxy Grand 2
Contributors
techmate98, ali.filth , techmate98
Version Information
Status: Stable
Current Stable Version: v1.0
Created 2014-08-26
Last Updated 2014-08-28
Reserved
Changelog:
v1.0
initial release
Reserved
Good day, can i request for stock recovery for our grand 2. To avoid flashing the whole firmware when we want to update the device via OTA.
Im requesting stock recovery for kitkat 4.4.2 build G8 and jb4.3
microchip88 said:
Good day, can i request for stock recovery for our grand 2. To avoid flashing the whole firmware when we want to update the device via OTA.
Im requesting stock recovery for kitkat 4.4.2 build G8 and jb4.3
Click to expand...
Click to collapse
Will provide you that too but as i am not on g8 or 4.3 so it will take time
Sent from my SM-G7102 using XDA Premium 4 mobile app
Okay Thnx. Is the recovery different in every kitkat build? Coz now I'm on kitkat G8 build and i flash the CWM NG4 4.4. 2 on top of my build and my CWM is working fine.
microchip88 said:
Okay Thnx. Is the recovery different in every kitkat build? Coz now I'm on kitkat G8 build and i flash the CWM NG4 4.4. 2 on top of my build and my CWM is working fine.
Click to expand...
Click to collapse
Yep. The stockstock recovery is different for each build. If you flash a G4 Stock recovery on a H3 firmware. It WILL flash and you'll be back to to clear data and factory reset too but you won't be able to flash OTA updates. Cause for that, you need the specific stock recovery for your current build.
Please provide the installation guide.
I am on stock NH3 but don't know how to extract stock recovery image. If guided, I can help.
anuajayan said:
Please provide the installation guide.
Click to expand...
Click to collapse
DONE:good::good::good:
microchip88 said:
Good day, can i request for stock recovery for our grand 2. To avoid flashing the whole firmware when we want to update the device via OTA.
Im requesting stock recovery for kitkat 4.4.2 build G8 and jb4.3
Click to expand...
Click to collapse
brother actually i have unrooted my device and returned to stock as i had to give to samsung care as there was some problem coming up in its display sorry but you will have to ask some other member for it
sajidbinraheem said:
I am on stock NH3 but don't know how to extract stock recovery image. If guided, I can help.
Click to expand...
Click to collapse
brother you will hav to first root the set up an sdk on your computer then using adb commands you can get the stock boot image out(busy box should be installed on your device)
Code:
dd if=/dev/block/mmcblk0p34 of=/sdcard/recovery.img
techmate98 said:
brother you will hav to first root the set up an sdk on your computer then using adb commands you can get the stock boot image out(busy box should be installed on your device)
Code:
dd if=/dev/block/mmcblk0p34 of=/sdcard/recovery.img
Click to expand...
Click to collapse
now i see 1 problem, how can we extract the stock recovery in kitkat, coz we need to flash the CWM or TWRP recovery first before we can root the device. i don't see any other method how to root our device without flashing first a custom recovery.
microchip88 said:
now i see 1 problem, how can we extract the stock recovery in kitkat, coz we need to flash the CWM or TWRP recovery first before we can root the device. i don't see any other method how to root our device without flashing first a custom recovery.
Click to expand...
Click to collapse
by flashing a prerooted ROM through odin or using CF-AUTOROOT..
I like the TWRP.. i dont have seen other problem Except that I BACK UP my ROM using S5 PORT ROM. After backing up., i installed the CM11 latest version, after an hour i RESTORE the S5 port rom that i had BACK-UP. But i cannot RESTORE it because it does not appear. What i need is COPY the BACK-UP from EXT-SD CARD to SD-CARD then RESTORE it. Is that the bug or that's the way of restoring it?
REQUEST..
sir Ali.Filth and Techmate98 can we request a FLASHABLE TWRP directly via CWM.. thank you sir. MORE POWER..
Android-secure partition
Is android-secure partition not available in our device or that TWRP 2.7 doesn't have that option? Because many apps in SdCard and when is not option to backup android-secure when restore the backup I don't have apps that in sdcard anymore. need to install that apps again. :crying:
thus this recovery work for K1 stock firmware.
hello,
will this work with G7105/LTE device ?
it does not say in thread for which device its for.
thanks
cookiepuppy said:
hello,
will this work with G7105/LTE device ?
it does not say in thread for which device its for.
thanks
Click to expand...
Click to collapse
can anyone help or answer pls, is this forum dead ? no matter which forum im asking question , it seems no one wants to answer . is this device dead ?
Related
Hi, I have a SM-A300F and I have been searching high and low for root guides/custom recovery for my device but not one seem to have develop anything yet for the SM-A300F or any other Samsung Galaxy A series(A3,A5,A7)
So is there any root this this specific firmware?Please
Product code SER
PDA A300FXXU1BOD5
CSC A300FOXY1BOD5
If there isnt any root/custom rcvry made for this device can someone make one please?
Or perhaps a specific guide on how to build one. Thanks in advance!!:
EDIT(SOLVED): Okay thanks to @Reyzeer for helping me out with rooting my device.
Reyzeer said:
Successfully rooted my 5.0.2 using CF-Auto Root for 4.4.4
Steps
Root Galaxy A300F 5.0.2
Download the official 5.0.2 Firmware
Rename the official 5.0.2 Firmware file extension from .tar.md5 to .tar
Open it with WinRar
Extract recovery.img and boot.img
Download Flashify in your android device
Copy recovery.img and boot.img to your phone (I edited this line to fix the recovery bootloop problem)
then flash recovery.img using flashify
then flash bootimg using flashify
Note: Don't restart/power off after rooting your 5.0.2 device, Just flash the recovery using flashify
Click to expand...
Click to collapse
P>S dont thank me. Thank Reyzeer!
+1
Tried using 4.4.4 Root (CF-Auto Root) .. successful at first boot. But when you restart/power off. It won't turn on..
Only works in Download Mode .. No recovery mode
Yeah. I tried that on my SM-A300F too but if your device isnt running on the same built id*KTU84P.A300FXXU1ANL1 then it wouldn't work. I just hope CF will update the new CF-Auto root.
Sent from my SM-A300F using XDA Free mobile app
Screnshots
Hi,
Can you upload screenshots of the Galaxy A3 lollipop please such as the lock screen and Home Screen
---------- Post added at 01:48 PM ---------- Previous post was at 01:43 PM ----------
bernardwu said:
Hi, I have a SM-A300F and I have been searching high and low for root guides/custom recovery for my device but not one seem to have develop anything yet for the SM-A300F or any other Samsung Galaxy A series(A3,A5,A7)
So is there any root this this specific firmware?Please
Product code SER
PDA A300FXXU1BOD5
CSC A300FOXY1BOD5
If there isnt any root/custom rcvry made for this device can someone make one please?
Or perhaps a specific guide on how to build one. Thanks in advance!!
Click to expand...
Click to collapse
Can you upload screenshots of this please of A3 Lollipop 5.0.2 such as lock screen and home screen and phone dialler and messaging
Galaxy A300F
Successfully rooted my 5.0.2 using CF-Auto Root for 4.4.4
Steps
Root Galaxy A300F 5.0.2
Download the 5.0.2 Firmware
Open it with WinRar
Extract recovery.img
Download Flashify in your android device
Copy recovery.img to your phone
then flash it using flashify
Note: Don't restart/power off after rooting your 5.0.2 device, Just flash the recovery using flashify
Is it clear for you sir?
Weather Widget
Hi,
What is the weather widget like on the A3 5.0.2 is it changed to the S6 weather widget or the same .
Please send me a screenshot of that please.
Thanks,
Sanay
Steps
Root Galaxy A300F 5.0.2
Download the 5.0.2 Firmware
Open it with WinRar
Extract recovery.img
Download Flashify in your android device
Copy recovery.img to your phone
then flash it using flashify
Note: Don't restart/power off after rooting your 5.0.2 device, Just flash the recovery using flashify
Is it clear for you sir?[/QUOTE]
It's like this.. See attachment. Cant put links
Notification panel
What does notification bar look like please last one
sanayp said:
What does notification bar look like please last one
Click to expand...
Click to collapse
I've downgraded to KitKat, Lollipop is full of bugs and it is laggy,stuttering,
You could have just uploaded a pic of notification bar then downgraded
Reyzeer said:
Successfully rooted my 5.0.2 using CF-Auto Root for 4.4.4
Steps
Root Galaxy A300F 5.0.2
Download the 5.0.2 Firmware
Open it with WinRar
Extract recovery.img
Download Flashify in your android device
Copy recovery.img to your phone
then flash it using flashify
Note: Don't restart/power off after rooting your 5.0.2 device, Just flash the recovery using flashify
Is it clear for you sir?
Click to expand...
Click to collapse
THANKS CAPTAIN!!!!
Will try it out after getting back to home!!!! kinda busy right now!
Will tell if it will work when I try it!!!
sanayp said:
Note: Don't restart/power off after rooting your 5.0.2 device, Just flash the recovery using flashify
Is it clear for you sir?
Click to expand...
Click to collapse
[/QUOTE]
Wait.. I am not sure what to do here.
1.I go to download mode, flash the cfautoroot.zip for 4.4.4 eventhough I am 5.0.2 right?
2.then you say flash the recovery.img from 5.0.2 StockRom file.
this is the part I don't quite get it. Cause you said dont reboot.
Do I flash it when my phone is turned on or should I put it in download mode to flash???
EDIT: OK ignore the all of the above. I got it now. I was stupid and blind. lol
EDIT2: All work perfectly. THANKS
Reyzeer said:
Successfully rooted my 5.0.2.
Is it clear for you sir?
Click to expand...
Click to collapse
there seems to be another problem.
rverytime I reboot my phone it reboots itself into recovery mode. It's Kinda annoying.
Anyway to fix this?
bernardwu said:
there seems to be another problem.
rverytime I reboot my phone it reboots itself into recovery mode. It's Kinda annoying.
Anyway to fix this?
Click to expand...
Click to collapse
what I did was shut down the phone for 5 minutes. power on, then reboot
Reyzeer said:
what I did was shut down the phone for 5 minutes. power on, then reboot
Click to expand...
Click to collapse
but when I shut it down it also automatically goes into recovery. Even if I choose power down in the stock recovery it stills reboots into recovery. I can boot it back up perfectly tho but now I just can't fully shut my phone down.
How did you manage to shut your phone down?
I shut down my phone via option from holding power button.
did you shutdown your phone by holding the power button for a period of time or you choose from the option from holding the power button for a few seconds??
Edit: I got it. I went to download mode via terminal emulator and then shutdown from there.
Upgraded To *********BOD9
[/B]
Reyzeer said:
I've downgraded to KitKat, Lollipop is full of bugs and it is laggy,stuttering,
Click to expand...
Click to collapse
Thank you very much for your instructions and I was able to upgrade my firmware to ********BOD9 (Russia). I did not feel any lagginess and the upgrade is smooth and stable from 4.4.4 to Android Lollipop 5.0.2 ********BOD9 (Russia). After I updraded the firmware, I root my phone using CFRoot 4.4.4, followed your instructions carefully. I did extra work to make sure the system is clear so that there will be no lagginess. After flashify the recovery.img and boot.img rebooted the phone by flashify it went back to the recovery. Then I wipe data cache and wipe cahe. Go to bootloader mode and again install ********BOD9 using ODIN V 3.10.6 and root and copy the recovery.img and boot.img of ******BOD9 to external SD Card. Next flashify the recovery.img and boot.img and reboot. Then the problem of recovery still exist. I off my phone for 2 minutes. Turn on my phone again, do restart and the problem of going to recovery was gone. Take note that flashify will be used for 3 flashing per day. If you consume the 3 flashing don't reboot your phone, patiently wait for 1 day and flashify the recovery and boot.img then reboot using flashify. It will bring you to the bad recovery and reboot system. Now my phone is updated to Android 5.0.2, no lagginess & no stuttering and no recovery problem. The only problem problem is I cannot backup my rom. Still waiting for CWM Recovery for SM-A300F.
Thx this helped but after rooting it, when I turn off the screen, after a while, it reboots and I don't know how to stop it. Any help please?
Reyzeer said:
I've downgraded to KitKat, Lollipop is full of bugs and it is laggy,stuttering,
Click to expand...
Click to collapse
forgive for my poor english. I have downgrade from lolipop to kitkat causevi think lolipop is very laggy, and is not going well. my back and recent key is not working. I'v tried to reboot the phone for many times and also tried to wipe data/dalvik in recovery but it still not work. Bro..! Can u teach me how is the right methode for downgrade it..? Realy2 need help
Hi do you have the stock music player of A3? I don't know why I don't have it on my phone after I upgraded it to 5.0.2
I am going to do an experiment(flashing TWRP.img on boot partition and trying to root.) to backup stock recovery.img of Lollipop 5.1. To do this, I need stock boot.img(Kernel Version: 3.4.42-gccbac57) of system version 23.26.2. If there's someone who rooted system version 23.26.2 then take backup of boot.img using Rashr App(Download from here forum.xda-developers.com/showthread.php?t=2334554 ) and post that stock boot.img here.
If this experiment succeed then I will post stock recovery.img of lollipop 5.1.
UPDATE: I'm not going to do this experiment because temporary booting of twrp is now working on moto e. We can root device by temporary booting twrp and backup stock recovery.img
isn't there anyone who rooted 23.26.2 ?
I have 23.21.34 version i can give you if you want...
cksup said:
I have 23.21.34 version i can give you if you want...
Click to expand...
Click to collapse
It's simple, you just have to extract the boot.img from any ota zip (suggested the official OTA zip)
Do that and give him then.......it will be very good if he can make the 5.1 stock recovery
cksup said:
Do that and give him then.......it will be very good if he can make the 5.1 stock recovery
Click to expand...
Click to collapse
First of all, you must clarify who is referred to as 'him'?
Secondly, there is no method(according to me) by which you can make a stock recovery from a stock kernel. There are two files namely the boot.img and the recovery.img.
First one is the kernel and the second one is the recovery.
Use the ones you like.
Him meant the op
I don't know if one can make recovery from boot.img.......The op didn't say that either....He said and i quote "I am going to do an experiment to backup stock recovery.img of Lollipop 5.1. To do this, I need stock boot.img(Kernel Version: 3.4.42-gccbac57) of system "
So i thought by using some process he may be able to back up stock recovery....that is why i said like that
and BTW where are those .img files available @Rohitagni
cksup said:
Him meant the op
I don't know if one can make recovery from boot.img.......The op didn't say that either....He said and i quote "I am going to do an experiment to backup stock recovery.img of Lollipop 5.1. To do this, I need stock boot.img(Kernel Version: 3.4.42-gccbac57) of system "
So i thought by using some process he may be able to back up stock recovery....that is why i said like that
and BTW where are those .img files available @Rohitagni
Click to expand...
Click to collapse
U can find them in any zipped firmware files. By zipped firmware files, I mean the zips for stock firmware, or the update zips that many XDA users capture here from their rooted phones to help users who haven't received the OTA, enjoy the new OS, simply by sideloading.
cksup said:
I have 23.21.34 version i can give you if you want...
Click to expand...
Click to collapse
Thanks, but I want 23.26.2 version boot.img.
Rohitagni said:
It's simple, you just have to extract the boot.img from any ota zip (suggested the official OTA zip)
Click to expand...
Click to collapse
I think, we can't extract boot.img from ota zip.
Rohitagni said:
First of all, you must clarify who is referred to as 'him'?
Secondly, there is no method(according to me) by which you can make a stock recovery from a stock kernel. There are two files namely the boot.img and the recovery.img.
First one is the kernel and the second one is the recovery.
Use the ones you like.
Click to expand...
Click to collapse
I'm not making recovery.img from boot.img. I will use boot.img to make my device functional again because I'm going to flash TWRP.img on boot partition and try to root. If device gets root access then I can backup stock recovery.img because stock recovery.img is not over written in process of rooting.
I hope you succeed.........I try to get it from someone
And no @Rohitagni you can't extract boot.img from uploaded update zips but from full firmware zips,yes which is not available
I just saw in general section someone uploaded twrp backup of stock latest 5.1......I can flash that and give the boot.img tomorrow @EthicalHacker
cksup said:
I hope you succeed.........I try to get it from someone
And no @Rohitagni you can't extract boot.img from uploaded update zips but from full firmware zips,yes which is not available
I just saw in general section someone uploaded twrp backup of stock latest 5.1......I can flash that and give the boot.img tomorrow @EthicalHacker
Click to expand...
Click to collapse
I am extremely sorry, for misleading you guys! I just found out that the fsg.bin and the gpt.bin (with logo.bin, etc) are the only things that are available in those zips. So yes, @cksup, you are correct. Please provide him with the kernel, so that miracles can happen
cksup said:
I hope you succeed.........I try to get it from someone
And no @Rohitagni you can't extract boot.img from uploaded update zips but from full firmware zips,yes which is not available
I just saw in general section someone uploaded twrp backup of stock latest 5.1......I can flash that and give the boot.img tomorrow @EthicalHacker
Click to expand...
Click to collapse
That's fine.
I think, the twrp backup; you're talking about is Brazilian. So be careful.
any one found the way to flash twrp on stock 5.1 lollipop previous method don't work.
Ansh2000 said:
any one found the way to flash twrp on stock 5.1 lollipop previous method don't work.
Click to expand...
Click to collapse
Use latest twrp.img and SuperSU zip to root.
And if you have 23.26.2 version then you may help me by posting stock boot.img here.
check out #1st post of this thread.
EthicalHacker said:
Use latest twrp.img and SuperSU zip to root.
And if you have 23.26.2 version then you may help me by posting stock boot.img here.
check out #1st post of this thread.
Click to expand...
Click to collapse
Yes I am on 23.26.2 version but unable to flash. twrp, tried all version of twrp but result is same.
Ansh2000 said:
Yes I am on 23.26.2 version but unable to flash. twrp, tried all version of twrp but result is same.
Click to expand...
Click to collapse
Use twrp 2.8.7 recovery
forum.xda-developers.com/moto-e/orig-development/recovery-twrp-2-8-6-0-touch-recovery-t3100879
with following root guide
forum.xda-developers.com/showthread.php?t=2755336
Ansh2000 said:
Yes I am on 23.26.2 version but unable to flash. twrp, tried all version of twrp but result is same.
Click to expand...
Click to collapse
Hey before you flash TWRP can you do something ....... can you dump for recovery partition and save it in sd card and post it here ....
hey i have a XT1025 on the 5.1 ota update, untouched, and how can i root my device?
cksup said:
Hey before you flash TWRP can you do something ....... can you dump for recovery partition and save it in sd card and post it here ....
Click to expand...
Click to collapse
We can't dump stock recovery without root access and moto e has only one rooting method which is flashing custom recovery on recovery partition. It means we lose stock recovery when we get root access.
That's why I'm taking risk of above mentioned experiment to backup stock recovery.
lnasc256 said:
hey i have a XT1025 on the 5.1 ota update, untouched, and how can i root my device?
Click to expand...
Click to collapse
Check out post no. #16 of this thread.
I have a backup of stock 5.1( 23.26.2) kernel and recovery, I took backup from rashr app after rooting my moto e, and I didnt flash twrp for rooting I boot into twrp, should I upload stock kernel or recovery?
Sent from my Xperia E3 using XDA Free mobile app
Hi, I have successfully rooted 5.0.2 rom on galaxy grand prime with cm autoroot for kit kat.
1. flash new 5.0.2 update with odin (if you had root on kit kat flash 2 times, it wont work first time) http://www.sammobile.com/firmwares/download/54047/G530FZXXU1BOG2_G530FZOXA1BOG2_PHE/
2. boot 5.0.2 set up google account and install super su
3. download flash cm autoroot https://download.chainfire.eu/664/CF-Root1/CF-Auto-Root-fortunalte-fortunaltedx-smg530f.zip?retrieve_file=1
4. boot again - phone will reboot 3 times before booting into system and updating super su, launch and set up super su
5. download recovery.zip, extract and flash it, WARNING use this recovery only with G530FZXXU1BOG2_G530FZOXA1BOG2_PHE, it is extracted from this rom and it should fix boot loop after flashing the cm autoroot package
6. reboot and you have rooted lollipop on G530FZ
MAKE SHURE YOU FLASH recovery from step no 5 otherwise you will end up in boot loop
p.s. I am now working on xposed installer
It worked. Thank you very much
Thank you it works !
Done, but i do not had to flash the recovery, the device has not entered bootloop
Same question as always: and knox? Is trigered right?
Edit: nevermind. I already have my answer.
zapetino said:
Done, but i do not had to flash the recovery, the device has not entered bootloop
Click to expand...
Click to collapse
can you enter recovery?
After this wonderfull root, do you know if an working xposed exist ?
PS: After flashing i think knox is triggerded (i trigered my knox when i flashed root in 4.4.4). Only Kingroot didn't triggered root.
hangy18 said:
can you enter recovery?
Click to expand...
Click to collapse
You were right, after another reboot the device was stuck in bootloop and i had to flash your recovery
zapetino said:
You were right, after another reboot the device was stuck in bootloop and i had to flash your recovery
Click to expand...
Click to collapse
how i flash this autoroot? via recovery or how?
Crimmy20 said:
how i flash this autoroot? via recovery or how?
Click to expand...
Click to collapse
Via ODIN
dcduartee said:
Via ODIN
Click to expand...
Click to collapse
and where i put this autoroot and recovery on odin? like witch section
Crimmy20 said:
and where i put this autoroot and recovery on odin? like witch section
Click to expand...
Click to collapse
PDA on older versions of odin or AP if you are using a newer version of odin
work on G530H?
It worked, and when you reboot the phone stopped working. When you try to run stands in the picture and nothing happens. Install recovery again by Odin, but nothing helps. Any ideas? (Sorry for the language, I have a translator)
hey guys does this method work on g530h ???
if not, can any1 link me to a guide to root my g530h i've been searching for 2 days plz hlp
Hey, it seems like I've got a problem, when I try to update SuperSU it fails :/
Did I do something wrong ?
hey can u plz tell me how did u extract the stock recovery from the rom i need it plz
Sent from my SM-G530H using Tapatalk
Yeh..how would one extract the stock recovery from the (.md5) file..is that possible.? or does one download the stock recovery (.img) file somewhere.?
sent by my: SM-G531M Grand Prime
(Lollipop 5.1.1)
I have this:
Model SM-G530FZ
Model name GALAXY Grand Prime
Country Spain
Version Android 5.0.2
Changelist 816937
Build date Thu, 17 Sep 2015 05:21:41 +0000
Product code PHE
PDA G530FZXXU1BOI2
CSC G530FZOXA1BOI2
Do I have to Flash the previous G530FZOXA1BOG2? Or can I skip this step and flash the autoroot directly? Would work the Recovery with my current version?
Just downloaded and installed Kingroot app...works fine
Here is the last version at the moment of the Maze alpha ROM (tested only in 4GB version)
It's a complete ROM, not an OTA update, it can be flashed using the provided TWRP 3.2.1 version, I ported from a Jemmini (many thanks) version for Bluboo S1.
Unfortunately, the TWRP cannot be flashed (issue with the touch panel), only launched by fastboot.
The ROM is the same as the v8 official one except that it is rooted using Magisk 15.2 and busybox 1.27.2 (thanks to osm0sis) is installed in /system/xbin
There is also a SPFlashTool clean version of this ROM, useful in case of troubles (as official: no root, no busybox)
1- Reboot you phone in fastboot mode : adb reboot bootloader
2- Flash the provided TWRP : fastboot flash recovery recovery_maze_alpha_4G_twrp-321.img
3- Reboot to TWRP recovery
4- copy in your SDCARD and install, in the running TWRP, the downloaded ROM V09 : Maze_Alpha_4GB_v09_TWRP.zip
The first boot take some minutes so be patient.
Here the SPFlashTool versions :
MAZE_Alpha_4GB_V09_SPFT.zip
Here, if needed, my V09 TWRP backup (new one from 21/04/2018) :
TWRP_BACKUP_MAZE_Alpha_A_V09.zip
Credits to Jemmini and Magisk team.
Can you make this for the 6 gb version?
many thanks gonna ty it soon
Nautilus99 said:
Can you make this for the 6 gb version?
Click to expand...
Click to collapse
I do not have the 6GB version
If I can download a stock ROM and a recent OTA update, I will do that.
Maze do not help us unfortunately
No complete stock ROM, No kernel source nothing !!!!!!!!!!
dreambo said:
I do note have the 6GB version
If I can download a stock ROM and a recent OTA update, I will do that.
Maze do not help us unfortunately
No complete stock ROM, No kernel source nothing !!!!!!!!!!
Click to expand...
Click to collapse
Yes i know its sad, i did a backup of mine and root it but it didnt work the backup i had to do clean flash, if we can manage to have a twrp and a source of the stock roms we could make a deabloat and put update apps ( menssages, calendar etc) and put mods for awsome features i dont see RR or lineage putting thier hands on this phone
Thanks for this Rom.
Is there any root for the maze alpha x?
here
WiddleyScudds said:
Is there any root for the maze alpha x?
Click to expand...
Click to collapse
read
The ROM is the same as the v8 official one except that it is rooted using Magisk 15.2 and busybox 1.27.2 (thanks to osm0sis) is installed in /system/xbin
Click to expand...
Click to collapse
thorfr said:
read
Click to expand...
Click to collapse
I have an alpha x, not alpha.
Thanks for ROM
When I install this ROM, from TWRP, i need install anything for root (Supersu)? Or when I install this ROM, I have root?
rzoli71 said:
Thanks for ROM
When I install this ROM, from TWRP, i need install anything for root (Supersu)? Or when I install this ROM, I have root?
Click to expand...
Click to collapse
No it is already rooted.
Reboot your phone to android, and then install MagsikManager.apk
I am editing my post to give you a 100% working TWRP 3.2.1 for our beloved Maze Alpha 4G :victory:
thank you
After I installed this rom, and freezed the hot knot, baidu_location FM Radio, etc, the BT connection did not break.
dreambo said:
No it is already rooted.
Reboot your phone to android, and then install MagsikManager.apk
I am editing my post to give you a 100% working TWRP 3.2.1 for our beloved Maze Alpha 4G :victory:
Click to expand...
Click to collapse
Hi dreambo,
do You know if there's a stock rom for download from maze alpha x? I think it's important for normal users and developers to get one. For normal users it's important to have an option to reinstall stock version and for developers I think it's the source for custom roms (e.g. Lineage Os).
If You know a source, can You please give us a link?
ahorntaler said:
Hi dreambo,
do You know if there's a stock rom for download from maze alpha x? I think it's important for normal users and developers to get one. For normal users it's important to have an option to reinstall stock version and for developers I think it's the source for custom roms (e.g. Lineage Os).
If You know a source, can You please give us a link?
Click to expand...
Click to collapse
No I not have any source, I am just a simple user like any other.
If I have any source or if I can make a ROM for MAZE Alpha X, I will do it and I will share it with every body, as I do until now for the MAZE Alpha 4/64
Hi
Sorry for stupid question, but is flashing with SP Flashtool an option to get root without wiping all data (unlike all other methods involving bootloader unlocking)?
iBolitN said:
Hi
Sorry for stupid question, but is flashing with SP Flashtool an option to get root without wiping all data (unlike all other methods involving bootloader unlocking)?
Click to expand...
Click to collapse
Unfortunatly no. As you will see repeated times in the forum, people have issue with phone not booting after changing from stock recovery to twrp. This is do (most likely from) to verified boot setting. And by unlocking bootloader we can bypass verified boot. So without unlock you might get a successfull load into twrp, but android will not boot.
Hello to all and please help if you can.
After unlocking the bootloader and flash the rom I'v got orange state with bootloop. Then after trying to fix it (wrong way) and relock bootloader and got red state with bootloop. I read that flahing back to stock fix the problem but I have no success with the rom provided in this post, the v5 from maze, the latest flash tool and the maze alpha flash tool... in all cases I get DA error(maze flash tool) or DA MISHMATCH (sp flash tool). I also tried different pc and cable with no result and finaly can't get fastboot. If that helps I've got the same flash tool error before the procedure. Every help will be appreciated.
stargazer78 said:
Hello to all and please help if you can.
After unlocking the bootloader and flash the rom I'v got orange state with bootloop. Then after trying to fix it (wrong way) and relock bootloader and got red state with bootloop. I read that flahing back to stock fix the problem but I have no success with the rom provided in this post, the v5 from maze, the latest flash tool and the maze alpha flash tool... in all cases I get DA error(maze flash tool) or DA MISHMATCH (sp flash tool). I also tried different pc and cable with no result and finaly can't get fastboot. If that helps I've got the same flash tool error before the procedure. Every help will be appreciated.
Click to expand...
Click to collapse
First unlock again your bootloader and use fastboot to flash boot, recovery and system partitions:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img.
Those partition images can be found in the ROM for SPFlashTool I have provide.
After that you can boot android normally.
If you any TWRP backup, you can restore it after flashing the TWRP.
Thanks a lot for your reply....
the problem is that i cant boot into fastboot to unlock bootloader....
the phone bootloops all the time, shows the red state alert and even with vol+ pressed the menu to choose recovery or fastboot doesn't apear... thanks again.
dreambo said:
First unlock again your bootloader and use fastboot to flash boot, recovery and system partitions:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img.
Those partition images can be found in the ROM for SPFlashTool I have provide.
After that you can boot android normally.
If you any TWRP backup, you can restore it after flashing the TWRP.
Click to expand...
Click to collapse
Is there any way to unlock the bootloader in my situation or/and enter the fastboot mode in order to follow your steps... thanks.
welcome ,
Moto One Power Stock Rom Twrp Flashable
with bootloop protection , Flashes are done inside fastboot environment
and you will experience a aroma based hyper shell user interface.
things You need
Full stock room zip download below
Twrp Installer zip v3.2.x : link Thanks to @lalitjoshi06
Motorola One Power , ofcourse
Steps to flash :
If you are in custom rom or stock rom steps are all same
boot to twrp
flash the zip
Do not wipe or erase anything all are automated , just reboot Twrp and flash the zip
PS: FULL STOCK ROM can take a little while to flash . have patience.
PSo not wipe or erase anything all are coded to be done automatically
just boot Twrp an flash the zip
Download Link : here
XDA:DevDB Information
Stock ROM and Firmware for TWRP, ROM for the Motorola One Power
Contributors
nageen9211, [email protected]
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2019-03-29
Last Updated 2019-08-19
Reserved
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
nageen9211 said:
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
Click to expand...
Click to collapse
Do you have a guide on how to make a stock flash zip file. I want make one for my device as well. Or if I give you the files can you help me out?:fingers-crossed:
xperia_bird said:
Do you have a guide on how to make a stock flash zip file. I want make one for my device as well. Or if I give you the files can you help me out?:fingers-crossed:
Click to expand...
Click to collapse
#OT
it might vary from device to device.. in this what i did is:
* extracted partition dump from device using adb shell(need root)
Code:
dd if=/path/to/partition/ of=/sdcard/or/anything
* then made the zip (You can use mine just replace the files with your device correct files.. and you are good to go.
* othe guy did more amazing hacks.. like he made some fastboot envoronment in twrp and directly made zip from fastboot images.. although those images are pretty much same as extracted from sdb but sparsed you can have look on them too
hope it helped
nageen9211 said:
#OT
it might vary from device to device.. in this what i did is:
* extracted partition dump from device using adb shell(need root)
* then made the zip (You can use mine just replace the files with your device correct files.. and you are good to go.
* othe guy did more amazing hacks.. like he made some fastboot envoronment in twrp and directly made zip from fastboot images.. although those images are pretty much same as extracted from sdb but sparsed you can have look on them too
hope it helped
Click to expand...
Click to collapse
Thankyou for Reply and I want to try it. Because it might help me to get back to stock. But only problem is I have a stock rom on my computer. In my device is a custom rom installed. And cant go back to stock, because my device gets in bootloop after flashing stock rom.
Do you think when I make a flash zip, that I can bypass bootloop?
Bootlooping
xperia_bird said:
Thankyou for Reply and I want to try it. Because it might help me to get back to stock. But only problem is I have a stock rom on my computer. In my device is a custom rom installed. And cant go back to stock, because my device gets in bootloop after flashing stock rom.
Do you think when I make a flash zip, that I can bypass bootloop?
Click to expand...
Click to collapse
First you need to find the reason for bootlooping then only making the stock zip is possible
Actually installing stock ROM from pc should not give bootlooping if bootloop occcrs you messed up with files check whether the files belonging to your device model reply with device model and other stuffs
[email protected] said:
First you need to find the reason for bootlooping then only making the stock zip is possible
Actually installing stock ROM from pc should not give bootlooping if bootloop occcrs you messed up with files check whether the files belonging to your device model reply with device model and other stuffs
Click to expand...
Click to collapse
But how to take a log if i cant enter system or connect adb for trying find the reason of bootloop.
Do you maybe know a way?
xperia_bird said:
But how to take a log if i cant enter system or connect adb for trying find the reason of bootloop.
Do you maybe know a way?
Click to expand...
Click to collapse
Your device and model
[email protected] said:
Your device and model
Click to expand...
Click to collapse
Lenovo Z5, L78011.
nageen9211 said:
March SP STOCK ROM Installation Instrucions:
All credits to : @[email protected]
All the files in the zip are pure fastboot files (sparsechunks)
INTRODUCING MOTO ONE POWER TWRP FLASHABLE VERY PURE STOCK ROM PPTS29.74-41-2
*The zip is created with fastboot environment and it flash the phone as how the fastboot in pc flashes .
*Instructions
*boot to twrp
*Important (unmount all parrions in twrp )
*You no need to wipe anything all wipes will be done inside fastboot environment
*Just unmount all partitions and flash the zip
Click to expand...
Click to collapse
I tried an AOSP Rom and found out that VoLTE is not working. So I flashed to stock using this method.
All is now working, but I am repeatedly getting this error message regarding Motorola update being unsuccessful, which is burning down my battery faster.
What can I do about it?.
Please help.
Plz make multirom twrp for moto one
anurag_xpert said:
I tried an AOSP Rom and found out that VoLTE is not working. So I flashed to stock using this method.
All is now working, but I am repeatedly getting this error message regarding Motorola update being unsuccessful, which is burning down my battery faster.
What can I do about it?.
Please help.
Click to expand...
Click to collapse
is there any update available.. update that with fastboot firmware.. becuase for som ereason it cannot update for you..
nageen9211 said:
is there any update available.. update that with fastboot firmware.. becuase for som ereason it cannot update for you..
Click to expand...
Click to collapse
Thanks for the reply. I have downladed april fastboot flashable rom from Mororola updates (link shared at telegram channel) but when i unpacked it, there was no flash script inside, so I could not flash that stock rom and I am still getting this error.
If you or somebody can share that flashall.bat script, i will be thankful.
edit: managed to flash the latest official firmware using youtube tutorial by andro guruji.
All my data was also safe.
Thanks again.
Will I get official updates after flashing this stock rom??
flashall.bat error
nageen9211 said:
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
Click to expand...
Click to collapse
i got factory rom ie .tar file for moto one power
i try to flash from fastboot and using flashall.bat in the stock rom folwer it show error
the system cannot find the path specification
how to get ride from this
Directory error
lbcsc.clx said:
i got factory rom ie .tar file for moto one power
i try to flash from fastboot and using flashall.bat in the stock rom folwer it show error
the system cannot find the path specification
how to get ride from this
Click to expand...
Click to collapse
Do not open cmd directly go to the folder where your Moto system files present and press shift and write click then press open command window here then type fastboot commands
[email protected] said:
Do not open cmd directly go to the folder where your Moto system files present and press shift and write click then press open command window here then type fastboot commands
Click to expand...
Click to collapse
See the cmd in screenshot below
nageen9211 said:
Download Links
Nov,2018
Firmware Link : Download
Feb,2019
Full ROM link : Download
Firmware Link : Downlaod
March,2019 (PPT29.74-41-2
Full ROM link : Download | Install Instructions {Credits : @[email protected]
FIrmware Link : Download
April,2019:
Full ROM : download
Firmware link : download
Click to expand...
Click to collapse
Can you please post the link for the july patch or if possible please provide the link for july full stock rom. I am not able to update via OTP. Tried everything.
nageen9211 said:
welcome ,
Moto One Power Stock Rom Twrp Flashable
with bootloop protection , Flashes are done inside fastboot environment
and you will experience a aroma based hyper shell user interface.
things You need
Full stock room zip download below
Twrp Installer zip v3.2.x : link Thanks to @lalitjoshi06
Motorola One Power , ofcourse
Steps to flash :
If you are in custom rom or stock rom steps are all same
boot to twrp
flash the zip
Do not wipe or erase anything all are automated , just reboot Twrp and flash the zip
PS: FULL STOCK ROM can take a little while to flash . have patience.
PSo not wipe or erase anything all are coded to be done automatically
just boot Twrp an flash the zip
Download Link : here
XDA:DevDB Information
Stock ROM and Firmware for TWRP, ROM for the Motorola One Power
Contributors
nageen9211, [email protected]
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Created 2019-03-29
Last Updated 2019-08-19
Click to expand...
Click to collapse
hi i am bricked my moto
now i back to fast boot mod
how can i flash stock rom by twrp?
help me
i am horrified to brick my device again