Hello,
I present to you very shortly and quickly the new MIUI ROM (multi-language) translated from the Official ROM for OnePlus One : ROM MIUI 4.9.5 (V5). This is the first translation of the first official release !
To download and try this address :
http://media.celogeek.com/roms/android/miui/4.9.12/xiaomi.eu_multi_A0001_4.9.12_v5-4.4.zip (languages available here : http://xiaomi.eu/community/threads/4-9-12.25694/)
Mirror [4.9.5] : https://mega.co.nz/#!qUtmUbAR!37QBGpwdOjkOma_3gY-rf0h6aOjWdSkeM4s_8grYp_w
Installation MIUI (or other ROM flashable with custom recovery) :
I remind you that neither I nor the forum we take responsibility for anything, everyone is aware of that is going to do.
Let's go :
1. Download the MIUI ROM and put it in your phone storage
2. Make sure your phone is properly detected by your PC
3. Boot phone in Bootloader Mode (Volume Up and Power) and flash a custom recovery like CWM Advanced Edition Philz Touch (http://forum.xda-developers.com/showthread.php?t=2201860)
4. Reboot in Recovery Mode (Volume Down and Power) and choose :
- Wipe and Format Options -> Clean to Install a New ROM (wipe datas, cache & dalvik-cache)
- or with other custom recovery : wipe data/factory reset -> wipe cache partition
5. After install the ROM, choose :
- Install Zip -> Choose zip from /sdcard -> select your ROM MIUI -> Reboot System Now
- or with other custom recovery : apply update -> choose from internal storage -> 0/ -> MIUI rom -> reboot system now
6. Enjoy MIUI v5 for OPO !
Notes:
If 4G is not enabled, use this procedure with the phone keypad *#*#4636#*#* then "phone information" -> "Set preferred network type" -> "TD-SCDMA, GSM/WCDMA and LTE" (or LTE/gsm auto)
Good flash
Sources: http://www.xiaomi.eu/
Thanks for this, was acctualy looking for this on the internet
---------- Post added at 08:43 PM ---------- Previous post was at 08:29 PM ----------
Does anyone have a mirrow? This link is way too slow
How can I change from using capacitor nav buttons to software nav buttons?
which gapps to use with this ROM?
Does this flash a Chinese custom recovery?
synergeticink said:
Does this flash a Chinese custom recovery?
Click to expand...
Click to collapse
I use the CWM Philz and no problem .
Linux4ever85 said:
How can I change from using capacitor nav buttons to software nav buttons?
Click to expand...
Click to collapse
Sorry, I have not found how to do... I'm not sure it is an integrated option in the ROM... maybe with a tweak.
some notes
1) it works perfectly with multirom
2) to install, in the updater script you must remove the first line (TWRP and european Oneplus)
3) WSM tools works with reboot option but Mi-Tools doesn't work for me...was anyone able to make them working?
Can we use custom kernels?
Sent from my A0001 using XDA Free mobile app
Lesson learned
I decided to try this rom so I figured I would do the safe thing and went into recovery and did a complete back up and then installed this rom. Didn't really like it so I thought I would go back and restore my previous rom guess what my custom recovery was gone and all my roms that were stored on my phone. Had to redo everything which took a very long time. So imo use multi rom and install along side of other rom so that you can go back and forth between them. That way you can decide which one you want to use as your daily rom.
i flashed it yesterday for a short time, cause of missing german language i decided to stick with cm11 nightlys
But as few said, the recovery was gone, i cant confirm this, my philz recovery was still there and i could restore my cm as normal!
How to enable 4g?
alexanderi said:
How to enable 4g?
Click to expand...
Click to collapse
*#*#4636#*#* phone information -> LTE/gsm
Does anyone knows how to apply the flashlight gesture?
I just installed the apk with the music and camera , but im really missing the flashlight :S
mca1490 said:
Does anyone knows how to apply the flashlight gesture?
I just installed the apk with the music and camera , but im really missing the flashlight :S
Click to expand...
Click to collapse
lol , nice rom, but where is system update?
You can use device conytrol to enable flashlight gesture
this rom is amazing...
but i would know when there will be an update to v6 for our device!!!thanks
about the rom for me it hasnt bugs
can any one provide me google drive mirror
Every time on lockscreen I have to press volume up + back key. why is that??
Wtf. Paying for faster Themedownload? I go back to Stock.
Noname2012 said:
Wtf. Paying for faster Themedownload? I go back to Stock.
Click to expand...
Click to collapse
Where did you see this at?
Related
My GT 10.1 is rooted but how do I update it to touchwiz? would the update harm my tablet?can someone pls tell me how to get the touchwiz update on a rooted galaxy tab 10.1 without breaking it, thank you
Would like to know as well. Seems like noone knows the answer..
Sent from my ADR6350 using XDA Premium App
do you have clockwork recovery installed?
use that to flash the new docrambone rom in the dev forum
krbernier said:
do you have clockwork recovery installed?
use that to flash the new docrambone rom in the dev forum
Click to expand...
Click to collapse
thanks, but can you please list out the steps, just don't want to brick my tablet and i'm sure there's a lot of peeps here that would like to know how to complete this update, be our HERO please and thanks.
gtabby said:
thanks, but can you please list out the steps, just don't want to brick my tablet and i'm sure there's a lot of peeps here that would like to know how to complete this update, be our HERO please and thanks.
Click to expand...
Click to collapse
Download the rooted stock or deodex version, copy to root of ur tab. Open rom manager, select install rom. After that it's pretty much self explanatory.
Sent from my GT-I9000 using XDA Premium App
go read this: http://forum.xda-developers.com/showthread.php?t=1171089
follow the steps to install clockwork recovery
then use it to install this rom http://forum.xda-developers.com/showthread.php?t=1198921
krbernier said:
go read this: http://forum.xda-developers.com/showthread.php?t=1171089
follow the steps to install clockwork recovery
then use it to install this rom http://forum.xda-developers.com/showthread.php?t=1198921
Click to expand...
Click to collapse
thanks.. i'll read up and try it out..
i assume since it is rooted that you already have clockwork recovery installed.
hold power and vol down to boot into recovery
select wipe cache/factory restore
select install from zip
select the rom i showed you
reboot!
you must put the rom in the root of your tab first
use androzip to move it there
krbernier said:
i assume since it is rooted that you already have clockwork recovery installed.
hold power and vol down to boot into recovery
select wipe cache/factory restore
select install from zip
select the rom i showed you
reboot!
you must put the rom in the root of your tab first
use androzip to move it there
Click to expand...
Click to collapse
sorry but still a newbie here and i might get annoying to some peeps here but just very cautious on how this would work. so i'm going to ask question
factory restore - does this mean i'm going a clean up and unrooting my device? from the steps above? is the end product going to have the touchwiz update or is this the touchwiz update with a email sync problem? where does the touchwiz update happen? i didn't see that step above?
lastly.. is there a video i watch to see this in action.
galaxytabhacks.com is a bit slow on updating their video's on how to update a rooted GT 10.1 with touchwiz update...
thank you all for the current post and i'm sure that there are many users here that will appreciate this information.. (for all you do please post and cheer on the peeps that helped us out).
how did you root your device?
if you follow those directions you will have the latest tw rom rooted
krbernier said:
how did you root your device?
Click to expand...
Click to collapse
i followed the steps (video) from site link galaxytabhacks.com/galaxy-tab-10-1-hacks/how-to-root-galaxy-tab-10-1-the-easy-way
basically follow those same steps.
boot into clockwork recovery
make a backup
do a wipe/factory reset
install zip from sdcard
select the docrambone rom i linked
install
reboot
you are now on the latest tw rom with root...easy!
krbernier said:
basically follow those same steps.
boot into clockwork recovery
make a backup
do a wipe/factory reset
install zip from sdcard
select the docrambone rom i linked
install
reboot
you are now on the latest tw rom with root...easy!
Click to expand...
Click to collapse
almost confident
ok.. so go to clockwork recovery - i know how with that two options (icons by pressing those buttons)
make a backup - don't know how?
factory reset - i'll read up
install zip from sdcard - done it before
install - if i find it i'll select install
reboot - hopefully
so how does the backup work - any steps.. where can i find that option. thanks again for all these information..
in the main clockword recovery menu select back up and restore ...select backup
these are all in the main menu of cwr... dont worry about the wipe/factory restore just select it and do it.....make sure you put the new rom in the root of your tab first. just like you did with the root.zip when you rooted
put the new rom zip in your tab
boot into cwr
make a back up
do a wipe/factory restore
select install from zip
select choose zip
select the rom zip you downloaded and put in the root of your tab
install
reboot
this is from the first link i gave you
Here is the clockwork mod menu
- Reboot system now (self explanatory )
- Apply update from SDcard. (when you connect your device to your computer it will show up as tablet. The SDcard that cwm refers to is simply your device storage. Always make sure to copy install.zips to the root directory of your tablet storage.) You use this when applying an update for a specific ROM if that is what the ROM developer says.
- Wipe Data/ Factory Reset You should always do this before you install a new ROM or if you are having minor issues with your device.
- Wipe cache partition Think of this as the lite version of whats above . If you do above though it doesn't hurt to do this too.
- Install zip from SDcard Use this to install new ROMs.
- Back up and Restore
- Mounts and Storage use this to connect your device to your computer when in recovery mode. It is also possible to transfer files to your device while in this mode.
- Advanced What you are interested in here is something called dalvik cache, you want to wipe this too before installing any new ROM
- Power off
this is the main menu of clockwork recovery
backupand restore...wipedata/factory reset...install zip reboot are all on this menu
krbernier said:
this is from the first link i gave you
Here is the clockwork mod menu
- Reboot system now (self explanatory )
- Apply update from SDcard. (when you connect your device to your computer it will show up as tablet. The SDcard that cwm refers to is simply your device storage. Always make sure to copy install.zips to the root directory of your tablet storage.) You use this when applying an update for a specific ROM if that is what the ROM developer says.
- Wipe Data/ Factory Reset You should always do this before you install a new ROM or if you are having minor issues with your device.
- Wipe cache partition Think of this as the lite version of whats above . If you do above though it doesn't hurt to do this too.
- Install zip from SDcard Use this to install new ROMs.
- Back up and Restore
- Mounts and Storage use this to connect your device to your computer when in recovery mode. It is also possible to transfer files to your device while in this mode.
- Advanced What you are interested in here is something called dalvik cache, you want to wipe this too before installing any new ROM
- Power off
this is the main menu of clockwork recovery
backupand restore...wipedata/factory reset...install zip reboot are all on this menu
Click to expand...
Click to collapse
ok.. almost ready.. can never be ready with these stuff but will try will all these information.. thanks.. you are a HERO for many of us this weekend.. i'll send an update tonight during and after the process .. hopefully if i encounter a problem i can still depend on your knowledge.. thank you.
Need some help as well.
My io tab went into that infinity loop so I flash it by fast boot, but then accidentally rooted it? i guess, as I see the superuser icon.
How do I get it back to stock. I have no backup with it at all....and don't know what is happening.
I just want a normal machine that can update to touchwiz officially. thanks
krbernier, thanks for the help!
Hey all,
I'm happy with my Tab 10.1 but it can be sluggish and so I decided to root it and install some kind of rom.
For rooting I found this guide on here which seems pretty simpel and useful.
But now comes the real question how do I proceed after this to instal a rom. Which one do I choose?
Is CM10 stable enough for me to try it, or should I go for stock 4.0.4?
And is there a proper guide on how to instal this?
Thanks :laugh:
LollieLaurie said:
Hey all,
I'm happy with my Tab 10.1 but it can be sluggish and so I decided to root it and install some kind of rom.
For rooting I found this guide on here which seems pretty simpel and useful.
But now comes the real question how do I proceed after this to instal a rom. Which one do I choose?
Is CM10 stable enough for me to try it, or should I go for stock 4.0.4?
And is there a proper guide on how to instal this?
Thanks :laugh:
Click to expand...
Click to collapse
I haven't try CM9 but CM10 is running soooo smooth.. http://droidbasement.com/db-blog/
Hope this helps!
jesongaudan said:
I haven't try CM9 but CM10 is running soooo smooth.. http://droidbasement.com/db-blog/
Hope this helps!
Click to expand...
Click to collapse
Okay, I think I'll try CM10, so I guess I should use this one: http://droidbasement.com/db-blog/?p=2749
I guess I'll find a tutorial on youtube on how to instal this with odin.
LollieLaurie said:
Okay, I think I'll try CM10, so I guess I should use this one: http://droidbasement.com/db-blog/?p=2749
I guess I'll find a tutorial on youtube on how to instal this with odin.
Click to expand...
Click to collapse
It's easier to install CWM and flash it there :good:
Yezariael said:
It's easier to install CWM and flash it there :good:
Click to expand...
Click to collapse
Great and how does this work?
LollieLaurie said:
Great and how does this work?
Click to expand...
Click to collapse
I use this tutorial http://androidroot.org/watch_video.php?v=73M6O5DMYGON
Error while trying to flash to JellyBean
About a week ago I flashed my P7510 (Wi-Fi) with this rom cm-10-20120728-EXPERIMENTAL-p3, I had all kind of issues, screen rotation, on the lock screen stating its charging while the battery stated its discharging even connect to the wall, etc.
I was able to go back to the backup I took before I flashed the tab, but now every time I try to flash the tab to a newer rom I get the following error:
Assert Failed: Getprop (“Ro.product.device”) = =”p4wifi”
Getprop (“Ro.product.device”) = =”p4wifi”
E: error in /SDCARD/ 31-07-12-13-30-jellybean-alpha-p4wifi-sig
Status 7
Installation aborted.
After doing a wipe of the cache and data I also get the following error:
E: unknown volume for path [/sd-ext]
Can anyone help me?
Thanks in advace.
2pacus said:
About a week ago I flashed my P7510 (Wi-Fi) with this rom cm-10-20120728-EXPERIMENTAL-p3, I had all kind of issues, screen rotation, on the lock screen stating its charging while the battery stated its discharging even connect to the wall, etc.
I was able to go back to the backup I took before I flashed the tab, but now every time I try to flash the tab to a newer rom I get the following error:
Assert Failed: Getprop (“Ro.product.device”) = =”p4wifi”
Getprop (“Ro.product.device”) = =”p4wifi”
E: error in /SDCARD/ 31-07-12-13-30-jellybean-alpha-p4wifi-sig
Status 7
Installation aborted.
After doing a wipe of the cache and data I also get the following error:
E: unknown volume for path [/sd-ext]
Can anyone help me?
Thanks in advace.
Click to expand...
Click to collapse
Are you flashing with Odin or CMW recovery ?
Can you send the content of build.prop in /system folder ?
Admin_root said:
Are you flashing with Odin or CMW recovery ?
Can you send the content of build.prop in /system folder ?
Click to expand...
Click to collapse
I am in the process of pulling my data (15 gig of movies) for a factory reset.
I used odin to root and I am using cmw 6 to install the rom.
2pacus said:
I am in the process of pulling my data (15 gig of movies) for a factory reset.
I used odin to root and I am using cmw 6 to install the rom.
Click to expand...
Click to collapse
OK Keep me informed
Admin_root said:
OK Keep me informed
Click to expand...
Click to collapse
I went with the UK ICS rom, seems to be working fine.
Otherwise you can follow this I RECOMMAND YOU CM9 MORE STABLE THAN CM10:
- Make a new download of the ROM from pershoot droidbasement
- Download the last CWM (recovery file)
- Download Gapps from goo.im
> Copy ROM and Gapps on the Tablet
> Flash the CWM with Odin 1.85 and USB cable (In PDA field)
> Boot in recovery mod (YOU SHOULD MAKE A FULL WIPE / FACTORY at this Step if you have backup of your datas otherwise tablet should freeze at boot animation)
> Choose install zip from sdcard
> Select the zip ROM and confirm the update
> Choose again install zip from sdcard
> Select the gapps zip and confirm update
> Return to the first menu of CWM and reboot system
Enjoy !
Sent from my GT-P7500 using XDA Premium HD app
Admin_root said:
Otherwise you can follow this I RECOMMAND YOU CM9 MORE STABLE THAN CM10:
- Make a new download of the ROM from pershoot droidbasement
- Download the last CWM (recovery file)
- Download Gapps from goo.im
> Copy ROM and Gapps on the Tablet
> Flash the CWM with Odin 1.85 and USB cable (In PDA field)
> Boot in recovery mod (YOU SHOULD MAKE A FULL WIPE / FACTORY at this Step if you have backup of your datas otherwise tablet should freeze at boot animation)
> Choose install zip from sdcard
> Select the zip ROM and confirm the update
> Choose again install zip from sdcard
> Select the gapps zip and confirm update
> Return to the first menu of CWM and reboot system
Enjoy !
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
Thanks, but I kinda like the UK ICS for now, may be in a week or two of fooling around with it, I'll try Jelly bean again.
Yes i understand stock ics is good too
But as i say at the begining of my post i recommand cm9 for a best user experience
See you later ...
Sent from my GT-P7500 using XDA Premium HD app
LollieLaurie said:
Hey all,
I'm happy with my Tab 10.1 but it can be sluggish and so I decided to root it and install some kind of rom.
For rooting I found this guide on here which seems pretty simpel and useful.
But now comes the real question how do I proceed after this to instal a rom. Which one do I choose?
Is CM10 stable enough for me to try it, or should I go for stock 4.0.4?
And is there a proper guide on how to instal this?
Thanks :laugh:
Click to expand...
Click to collapse
Which ROM you choose really is up to you - that's the beautiful thing about Android. Really, the sky's the limit! Well...what's available is the limit but you know what I'm saying
Do your research on the threads under Android Development - all the ROMs that are available for HC, ICS, JB, etc. Think about what YOU want out of your tablet...are you wanting to be on the cutting edge of development where you want an experimental JB that may have some bugs in it, or do you want something super stable and creamy smooth like a custom HC? Or, do you just want to speed up your stock ROM with a custom kernel?
There's SO much on here to explore. It's taken me two weeks just to get to a point where I'm comfortable flashing! I'm running CM10 right now but have been through a couple of other ROMs. Task650's Galaxy Task 14 is a great ROM too.
It's always a good idea to take a Nandroid backup once you go any further...for example I have a Nandroid backup of my unrooted image so to get back to stock I can just restore to that.
Basically when you're ready you just download the ROM of your choosing to your tab (and any required supplementary files - READ THE INSTRUCTIONS ON EACH THREAD VERY CAREFULLY). Reboot into recovery, take a backup, and follow the instructions given by the developer TO THE LETTER for installing the ROM. I highly recommend doing a full wipe of your device (cache partition, data/factory reset, Dalvik cache) before installing any new ROM to ensure you don't run into any issues.
You have all the support you need on this forum to resolve any issue you may have - just make sure you search the threads DILIGENTLY before asking questions, and post questions in the appropriate place - you should be fine!! GOOD LUCK AND HAVE FUN!!!
I completely agree with you ... very good post!
I said CM9 because the tablet is recent and it was nice to see the result with this rom ...
Sent from my GT-P7500 using XDA Premium HD app
djmatt604 said:
Which ROM you choose really is up to you - that's the beautiful thing about Android. Really, the sky's the limit! Well...what's available is the limit but you know what I'm saying
Do your research on the threads under Android Development - all the ROMs that are available for HC, ICS, JB, etc. Think about what YOU want out of your tablet...are you wanting to be on the cutting edge of development where you want an experimental JB that may have some bugs in it, or do you want something super stable and creamy smooth like a custom HC? Or, do you just want to speed up your stock ROM with a custom kernel?
There's SO much on here to explore. It's taken me two weeks just to get to a point where I'm comfortable flashing! I'm running CM10 right now but have been through a couple of other ROMs. Task650's Galaxy Task 14 is a great ROM too.
It's always a good idea to take a Nandroid backup once you go any further...for example I have a Nandroid backup of my unrooted image so to get back to stock I can just restore to that.
Basically when you're ready you just download the ROM of your choosing to your tab (and any required supplementary files - READ THE INSTRUCTIONS ON EACH THREAD VERY CAREFULLY). Reboot into recovery, take a backup, and follow the instructions given by the developer TO THE LETTER for installing the ROM. I highly recommend doing a full wipe of your device (cache partition, data/factory reset, Dalvik cache) before installing any new ROM to ensure you don't run into any issues.
You have all the support you need on this forum to resolve any issue you may have - just make sure you search the threads DILIGENTLY before asking questions, and post questions in the appropriate place - you should be fine!! GOOD LUCK AND HAVE FUN!!!
Click to expand...
Click to collapse
+1
I really wanna be sure what I do:
So if I root the device through this guide: http://forum.xda-developers.com/showthread.php?t=1239185
and afterwards I use this: http://forum.xda-developers.com/showthread.php?t=1787399
I hope I don't screw up the tablet
Admin_root said:
Otherwise you can follow this I RECOMMAND YOU CM9 MORE STABLE THAN CM10:
- Make a new download of the ROM from pershoot droidbasement
- Download the last CWM (recovery file)
- Download Gapps from goo.im
> Copy ROM and Gapps on the Tablet
> Flash the CWM with Odin 1.85 and USB cable (In PDA field)
> Boot in recovery mod (YOU SHOULD MAKE A FULL WIPE / FACTORY at this Step if you have backup of your datas otherwise tablet should freeze at boot animation)
> Choose install zip from sdcard
> Select the zip ROM and confirm the update
> Choose again install zip from sdcard
> Select the gapps zip and confirm update
> Return to the first menu of CWM and reboot system
Enjoy !
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
Yes you can also follow this with cm9 or cm10, if you take the recovery file in the same folder than the rom (you should test cm9 first because more stable ... but it's my advice)
Sent with my GT-P7500 CM10
Evervolv 4.1.2, brought to you by Optima Team
What is Evervolv?
We are an AOSP port aimed at Snapdragon powered devices.
Our rom includes all the basics:
Extended PowerMenu
Battery %,
Volume button music control.
Trackball Wake
Theme manager
Unique additions include:
sixbar signal strength
lockscreen styles
However our biggest feature is the ability to turn all that off with one switch in the toolbox, giving you 100% aosp look and feel.
We also do eng builds (instead of userdebug like everyone else) providing more open experience (ie adb root by default) and full complement of commandline tools (busybox, vim, ssh, curl/wet with ssl support!)
Bugs :
Flipped recents screenshot (need help fixing this)
Everything else should be fine.
Download :
Evervolv 4.1.2 FINAL [v1]
Screenshot :
Click here !
Installation Instruction :
V10 BASEBAND ONLY !
1.) Download the ROM .zip
2.) Go to recovery
3.) Wipe data & cache
4.) Install ROM .zip (also install v10Baseband zip if you haven't)
5.) Reboot
Great work!
L5 version comes soon!!
Sent from my Moto G XT1033 using Tapatalk
WOWW ...
GREAT ! thank you !
how to install this rom?
manhkhangkkn said:
how to install this rom?
Click to expand...
Click to collapse
By CWM ,like all others Custom roms
full wipe highly recomended ,in theory ...
manhkhangkkn said:
how to install this rom?
Click to expand...
Click to collapse
Just normal way to install a ROM :
1.) Download
2.) Go to recovery
3.) Flash the ROM zip
4.) Flash v10 Baseband
5.) Wipe data & cache
6.) Reboot
F4uzan said:
Just normal way to install a ROM :
1.) Download
2.) Go to recovery
3.) Flash the ROM zip
4.) Flash v10 Baseband
5.) Wipe data & cache
6.) Reboot
Click to expand...
Click to collapse
I try it but the phone say com.phone.android stoped, systemUI too. I flash F4kernel or phenom kernel but still don't work
:crying:
manhkhangkkn said:
I try it but the phone say com.phone.android stoped, systemUI too. I flash F4kernel or phenom kernel but still don't work
:crying:
Click to expand...
Click to collapse
Weird, I never encountered an issue like this before. I'll address it and try to fix it.
where can i find the features of this rom and screenshots ? i don't find them on internet (interresting presentation) ...
Boom,the next great rom by TEAM-OPTIMA!!!!Great work
GREETZ FROM TEAM-OPTIMA!!!
All of us have, one wish to have a custom rom on our device.
After few days of web browsing, I founded one really cool possibility, and that is idea of using
SAMSUNG GALAXY V CUSTOM ROM.
Thats true we can use them all, and all of them can be finded on :
http://www.galaxyvarchive.blogspot.com/
But after flashing via CWM, you will need to flash custom build prop of our phone.
If you are new in flashing custom roms continue reading, and also there will be special note how to flash build prop correctly !
INSTRUCTIONS :
1) Turn phone in CWM(Hold power,menu and volume up button together)
2) Wipe data, cash, dalvik-placed in advanced options
3) Chose zip from sd card, and search rom you are download (Zentouch V2, and Nemoid recommanded)
4)wait till install complete
******* THEN YOU WILL NEED TO INSTALL BUILD PROP ! *********
1) after installation of rom dont turn of recovery
2) again wipe dalvik
3)choose build prop and wait till complete
4)Reboot your device and enjoy !
NOTE: ZENTOUCH, AND NEMOID DONT CONTAIN ANY ERRORS (JUST IF YOU FLASH TEIR UPDATES YOU NEED TO FLASH CLEAN ROM, DONT UPDATES OF THIS ROMS), AND DONT EXTRACT ZIP FILE OF ROM OR BUILD PROP IT NEED TO BE LIKE THAT !
AND THIS WORKS FOR ALL OF OUR SM-G130 VERSIONS!
CWM IF YOU DONT HAVE IT
So first what you will need is ODIN 3.09 To instal cwm recovery
1) Start odin(note: phone must be unplugged)
2) Turn phone into download mode
3) Check ap box, and find cwm.tar file placed on your pc after download and than select it..
4) Flash it via odin
5) Reboot your phone
6) Turn it off again
7) Press volume +, home and power button and voila you got cwm
Please press tnx
MirnesAndroidYoung2 said:
NOTE: ZENTOUCH, AND NEMOID DONT CONTAIN ANY ERRORS (JUST IF YOU FLASH TEIR UPDATES YOU NEED TO FLASH CLEAN ROM, DONT UPDATES OF THIS ROMS), AND DONT EXTRACT ZIP FILE OF ROM OR BUILD PROP IT NEED TO BE LIKE THAT !
AND THIS WORKS FOR ALL OF OUR SM-G130 VERSIONS!
Click to expand...
Click to collapse
I installed 3 different roms, followed the instructions and flashed buildprop. With all roms I get the same error: "unfortunately, the process com.android.systemui has stopped". The Galaxy V is 480x800 pixels, roms are no good, they don't display correctly. Some of the phone dialler numbers are not displaying because of the different resolution. We need a rom adapted to our phone.
MirnesAndroidYoung2 said:
All of us have, one wish to have a custom rom on our device.
After few days of web browsing, I founded one really cool possibility, and that is idea of using
SAMSUNG GALAXY V CUSTOM ROM.
Thats true we can use them all, and all of them can be finded on :
http://www.galaxyvarchive.blogspot.com/
But after flashing via CWM, you will need to flash custom build prop of our phone.
If you are new in flashing custom roms continue reading, and also there will be special note how to flash build prop correctly !
INSTRUCTIONS :
1) Turn phone in CWM(Hold power,menu and volume up button together)
2) Wipe data, cash, dalvik-placed in advanced options
3) Chose zip from sd card, and search rom you are download (Zentouch V2, and Nemoid recommanded)
4)wait till install complete
******* THEN YOU WILL NEED TO INSTALL BUILD PROP ! *********
1) after installation of rom dont turn of recovery
2) again wipe dalvik
3)choose build prop and wait till complete
4)Reboot your device and enjoy !
NOTE: ZENTOUCH, AND NEMOID DONT CONTAIN ANY ERRORS (JUST IF YOU FLASH TEIR UPDATES YOU NEED TO FLASH CLEAN ROM, DONT UPDATES OF THIS ROMS), AND DONT EXTRACT ZIP FILE OF ROM OR BUILD PROP IT NEED TO BE LIKE THAT !
AND THIS WORKS FOR ALL OF OUR SM-G130 VERSIONS!
CWM IF YOU DONT HAVE IT
So first what you will need is ODIN 3.09 To instal cwm recovery
1) Start odin(note: phone must be unplugged)
2) Turn phone into download mode
3) Check ap box, and find cwm.tar file placed on your pc after download and than select it..
4) Flash it via odin
5) Reboot your phone
6) Turn it off again
7) Press volume +, home and power button and voila you got cwm
Please press tnx
Click to expand...
Click to collapse
Any news on how to make roms work? Thanks
razvangrig said:
Any news on how to make roms work? Thanks
Click to expand...
Click to collapse
I just got the touch screen of my SM-G130 repaired and my phone was "gone" for a few weeks. Had no chance yet to try these custom ROMs. I am going away now for summer holidays, but when I return halfway August I am gonna try the ROMs and will post my experiences. Bye bye.
Thnx for this post(searching for post of our young 2 for weeks). Gonna try these roms
But there is one problem Both deletes my IMEI number so, I cant use my SIM.
Zentouch V2 works perfectly in mi Young 2. I will write a post in HTCMania, in Spanish, on how install the ROM.
TuTrolloLove said:
Zentouch V2 works perfectly in mi Young 2. I will write a post in HTCMania, in Spanish, on how install the ROM.
Click to expand...
Click to collapse
Did you use SM-G130 BUILDPROP.zip from this thread? Can you please post the instructuons or the link to htcmania thread? Thank you
razvangrig said:
Did you use SM-G130 BUILDPROP.zip from this thread? Can you please post the instructuons or the link to htcmania thread? Thank you
Click to expand...
Click to collapse
Yes, I used the buildpro this post. I can not post links. Enter HTCMania, see section Samsung, look at other Samsung smartphones and find the post with the following name: Instalar Custom ROM en Galaxy Young 2 That's my post. Luck.
Found it, thanks:
http://www.htcmania.com/showthread.php?t=1047334
Zentouch Rom:
http://forum.xda-developers.com/android/development/rom-zentouch-rom-galaxy-sm-g313hz-t3140610
Hi there people,
Do you guys experience significant performance / speed increase with these custom roms, in comparison with the stock rom?
Thanks!
I'm sharing with you another build.prop for those who have got a SM-G130HN device and wanna install ZenTouch ROM v2:
View attachment SM-G130HN_BUILDPROP.zip
It's a flashable ZIP, don't worry about that.
TuTrolloLove said:
Zentouch V2 works perfectly in mi Young 2. I will write a post in HTCMania, in Spanish, on how install the ROM.
Click to expand...
Click to collapse
Thanks to you I've got to these threads about this device, haha…
I can't receive calls with any rom of Samsung Galaxy V that install in SM-G130M...
ROM SM-P601 P601XXDOK4 (New Firmware release)
This will trip KNOX....
So you have been warned about all possible consequences. I am not responsible of anything that can happens to your device.
Please test and report.
Video Preview:
Latest firmware from Samsung P601XXDOK4 LL 5.1.1
Stock.
Deodexed.
Zipaligned.
Not Root ( to root flash SuperSU HERE )
FrameWork:
- 5 Way Reboot TW lollipop
SystemUI :
- Add new effects (WaterDroplet,SparklingBubbles,LensFlare,POPPINGCOLOURS )
- Mod quick icon Note 5 MM 6.0
- Recent bar trans
- Hide backup password text and icon.
Secsetting:
- Remove Power Saving Notification
- Change Modified device status to Normal
Touchwiz home:
- Note 5 icon mod ( folder, all app button)
- SoundAlive_20 support all bluetooth
- CSC tweak and mod
- Enable SD card write permittion
Backup FIRST
- Reboot in Recovery, Power off then push Power and volume up for 3 seconds, release buttons. Wait until TWRP load.
Factory reset and wipe all but Internal and SDcard.
Flash the ROM in recovery with TWRP 2.8.7.0. After flashing if TWRP ask to fix root, DO NOT INSTALL!
Downloads:
P601DOK4ModBinh24 Deoxed
AirCommand Note 5 _for_Note 10.1 2014 (Android 5.1.1)
Download HERE
PRESS THANKS NOW
After doing a full wipe (cache, dalvik cache, system, internal memory) and install, is stuck on black screen. and installing on another rom and doing the wipes, to start, multiple system applications are giving force close constantly.
This rom has the language PT-BR? If not, how can I add?
pcparaosamigos said:
After doing a full wipe (cache, dalvik cache, system, internal memory) and install, is stuck on black screen. and installing on another rom and doing the wipes, to start, multiple system applications are giving force close constantly.
This rom has the language PT-BR? If not, how can I add?
Click to expand...
Click to collapse
Flash stock P601XXDOK4 ROM then my ROM
TO enable PT-BR you can try to delete language.xml on system/csc
binh24 said:
Flash stock P601XXDOK4 ROM then my ROM
TO enable PT-BR you can try to delete language.xml on system/csc
Click to expand...
Click to collapse
You didn't explain the word "then" is it clean or dirty flash, anyway, I have tried both ways to flash your ROM.
1. Dirty Flash
The ROM was successfully flashed, but when I go for setting, it FC.
2. Clean Flash
It won't boot at all, stop on blank screen after Samsung logo.
I have tried both ways, without any mods, SuperSU or any additional apps. Thus, I believe, your ROM is conflicting with the original stock. This is almost the same as the other deodexed DOK4 ROM, while the DOJ5 ROM seems working nicely.
Perhaps it is better to play around with DOJ5 ROM instead of DOK4, or maybe you can find the error on future development. Thanks for your wonderful effort, your ROM surely looks better than the stock, just need some fixing. Keep up the work.
How To Flash This ROM + SuperSU
binh24 said:
Flash stock P601XXDOK4 ROM then my ROM
TO enable PT-BR you can try to delete language.xml on system/csc
Click to expand...
Click to collapse
binh24 said:
ROM SM-P601 P601XXDOK4 (New Firmware release)
This will trip KNOX....
So you have been warned about all possible consequences. I am not responsible of anything that can happens to your device.
Please test and report.
Video Preview:
Latest firmware from Samsung P601XXDOK4 LL 5.1.1
Stock.
Deodexed.
Zipaligned.
Not Root ( to root flash SuperSU HERE )
FrameWork:
- 5 Way Reboot TW lollipop
SystemUI :
- Add new effects (WaterDroplet,SparklingBubbles,LensFlare,POPPINGCOLOURS )
- Mod quick icon Note 5 MM 6.0
- Recent bar trans
- Hide backup password text and icon.
Secsetting:
- Remove Power Saving Notification
- Change Modified device status to Normal
Touchwiz home:
- Note 5 icon mod ( folder, all app button)
- SoundAlive_20 support all bluetooth
- CSC tweak and mod
- Enable SD card write permittion
Backup FIRST
- Reboot in Recovery, Power off then push Power and volume up for 3 seconds, release buttons. Wait until TWRP load.
Factory reset and wipe all but Internal and SDcard.
Flash the ROM in recovery with TWRP 2.8.7.0. After flashing if TWRP ask to fix root, DO NOT INSTALL!
Downloads:
P601DOK4ModBinh24 Deoxed
AirCommand Note 5 _for_Note 10.1 2014 (Android 5.1.1)
Download HERE
PRESS THANKS NOW
Click to expand...
Click to collapse
Finally I have succeeded to flash this good looking ROM on my SM-P601, these are the steps;
(Please follow and read properly)
-----------------------------------------------------------------------------------------------------------------
1. Download deodexed DOJ5 ROM from the next door thread (Official Deodexed)
2. As usual, put it on your SDCard
3. Boot into TWRP, for me, I use TWRP 2.8.76
4. Flash the deodexed DOJ5 ROM til its done (by default it will install SuperSU 2.52)
5. When DOJ5 is done, do clean dalvik and cache, just those 2 and no others
6. Then flash this modded DOK4 ROM and wait til its done
**Though this modded DOK4 is deodexed, it has no root access which it will conflict with the previous installed DOJ5 and it may cause boot failure or bootloop, thus, you need systemless SuperSU
7. Next is to flash SuperSU 2.66 (I haven't tried using CF AutoRoot)
8. When everything is complete, again do clean dalvik and cache
9. Boot to system without installing SuperSU from TWRP (it will ruin systemless SuperSU 2.66)
**REMEMBER TO NEVER INSTALL SUPERSU FROM TWRP IT WILL BREAK ROOT
--------------------------------------------------------------------------------------------------------------------
Result are shown by attached picture
1. Base ROM is DOK4
2. Baseband is DOJ4
3. Note 5 Icons and appearance
4. Root access
5. Ext SDCard access R/W
6. 5 ways on reboot menu (on restart option)
7. Camera is working
8. Latest Google Play
9. Updated Galaxy Apps
10. ViperFX Working
11. Air Command Working (Disable default air command if you wish to use this new looks)
That's all folks, enjoy the ROM and please be kind to say thank you on binh24' wonderful work for our beloved SM-P601.
Maaciiih cemuaaah...... Salam dari Jakarta
ghembuls said:
Finally I have succeeded to flash this good looking ROM on my SM-P601, these are the steps;
(Please follow and read properly)
-----------------------------------------------------------------------------------------------------------------
1. Download deodexed DOJ5 ROM from the next door thread (Official Deodexed)
2. As usual, put it on your SDCard
3. Boot into TWRP, for me, I use TWRP 2.8.76
4. Flash the deodexed DOJ5 ROM til its done (by default it will install SuperSU 2.52)
5. When DOJ5 is done, do clean dalvik and cache, just those 2 and no others
6. Then flash this modded DOK4 ROM and wait til its done
**Though this modded DOK4 is deodexed, it has no root access which it will conflict with the previous installed DOJ5 and it may cause boot failure or bootloop, thus, you need systemless SuperSU
7. Next is to flash SuperSU 2.66 (I haven't tried using CF AutoRoot)
8. When everything is complete, again do clean dalvik and cache
9. Boot to system without installing SuperSU from TWRP (it will ruin systemless SuperSU 2.66)
**REMEMBER TO NEVER INSTALL SUPERSU FROM TWRP IT WILL BREAK ROOT
--------------------------------------------------------------------------------------------------------------------
Result are shown by attached picture
1. Base ROM is DOK4
2. Baseband is DOJ4
3. Note 5 Icons and appearance
4. Root access
5. Ext SDCard access R/W
6. 5 ways on reboot menu (on restart option)
7. Camera is working
8. Latest Google Play
9. Updated Galaxy Apps
10. ViperFX Working
11. Air Command Working (Disable default air command if you wish to use this new looks)
That's all folks, enjoy the ROM and please be kind to say thank you on binh24' wonderful work for our beloved SM-P601.
Maaciiih cemuaaah...... Salam dari Jakarta
Click to expand...
Click to collapse
I really decided to try to make a rom deodexed and after breaking a bit the head, I made my first full, rom, deodexed rooted, debloated, although still have been useless applications each man to see. But gradually I am improving yourself. at the moment, my full testing rom p601xxudoj4 region SER. Working so far And normal. i would like to learn how to make mods, like the menu off with 5 functions. finally, one step at a time.
Has anyone tried to flash the air command alone? does it work?
ridicul0us said:
Has anyone tried to flash the air command alone? does it work?
Click to expand...
Click to collapse
It working for me
datdoan said:
It working for me
Click to expand...
Click to collapse
Hi, are you using P601XXDOK4 rom? I'm using P601ODDDOJ3 from India and I think it only works if I flash it with the lockscreen effect.
P601xxudok4
Stock rom cooked by me.
● Deodexed
● Debloated
● Rooted with new method that does not generate conflict with bootloader
● Fix external sdcard write
● All languages available
● Knox removed
⊙ advisable to do an installation clean. it may be that the screen is black in the part to choose the languages. turn off and turn on the screen that all back to normal.
● Link: https://drive.google.com/file/d/0B2a0geYLaY0oZ1VCT1BDeUFKbGM/view?usp=docslist_api
ridicul0us said:
Hi, are you using P601XXDOK4 rom? I'm using P601ODDDOJ3 from India and I think it only works if I flash it with the lockscreen effect.
Click to expand...
Click to collapse
yes, i using DOK4 ROM.
can i install this rom directly to P602? is this work?
stormy_ugur said:
can i install this rom directly to P602? is this work?
Click to expand...
Click to collapse
I do not know if will work. and they both p601 p602 possess the same hardware, but I do not have a problem with bootloader. you try if you have a way to restore your device in case of error.
This ROM look good. I am downloading.:laugh:
binh24 said:
ROM SM-P601 P601XXDOK4 (New Firmware release)
This will trip KNOX....
So you have been warned about all possible consequences. I am not responsible of anything that can happens to your device.
Please test and report.
Video Preview:
Latest firmware from Samsung P601XXDOK4 LL 5.1.1
Stock.
Deodexed.
Zipaligned.
Not Root ( to root flash SuperSU HERE )
FrameWork:
- 5 Way Reboot TW lollipop
SystemUI :
- Add new effects (WaterDroplet,SparklingBubbles,LensFlare,POPPINGCOLOURS )
- Mod quick icon Note 5 MM 6.0
- Recent bar trans
- Hide backup password text and icon.
Secsetting:
- Remove Power Saving Notification
- Change Modified device status to Normal
Touchwiz home:
- Note 5 icon mod ( folder, all app button)
- SoundAlive_20 support all bluetooth
- CSC tweak and mod
- Enable SD card write permittion
Backup FIRST
- Reboot in Recovery, Power off then push Power and volume up for 3 seconds, release buttons. Wait until TWRP load.
Factory reset and wipe all but Internal and SDcard.
Flash the ROM in recovery with TWRP 2.8.7.0. After flashing if TWRP ask to fix root, DO NOT INSTALL!
Downloads:
P601DOK4ModBinh24 Deoxed
AirCommand Note 5 _for_Note 10.1 2014 (Android 5.1.1)
Download HERE
PRESS THANKS NOW
Click to expand...
Click to collapse
successed install this Rom. but there are 2 problems :
1. always showup notification securitu notice
unauthorized actions have been detected. tap here for more information.
=> how to stop this notification??
2. air command
yes it works. but so sad the function isn't the same with note 5 function. for example : screen write. I cannot capture like note 5 do. wish it have note 5 function hehehe.
I know this is a little off topic but i didnt know whether or not to make a new topic so i thought I'd ask. I download the official 5.1.1 rom for P601 from sammobile. Thing is, its the Russian one (P601XXUDOJ2_P601SERDOJ2_SER) and mine is from South Africa (P601XXUCNJ1)
Will it work as normal on my device? I am not rooted
Sent from my SM-G925F using Tapatalk
timberland88 said:
I know this is a little off topic but i didnt know whether or not to make a new topic so i thought I'd ask. I download the official 5.1.1 rom for P601 from sammobile. Thing is, its the Russian one (P601XXUDOJ2_P601SERDOJ2_SER) and mine is from South Africa (P601XXUCNJ1)
Will it work as normal on my device? I am not rooted
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
It should work without any problem
hope it can help
pippone121263 said:
It should work without any problem
hope it can help
Click to expand...
Click to collapse
Thanks for the feedback. Flashed it via Odin. Had some lag upon the first reboot but a factory reset solved the problem. Running very smooth
Sent from my SM-G925F using Tapatalk
timberland88 said:
Thanks for the feedback. Flashed it via Odin. Had some lag upon the first reboot but a factory reset solved the problem. Running very smooth
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
Did you flash twrp after you flashed the rom. I am failing to get recovery flashed.
Sent from my SM-P601 using Tapatalk
s2mishappy said:
successed install this Rom. but there are 2 problems :
1. always showup notification securitu notice
unauthorized actions have been detected. tap here for more information.
=> how to stop this notification??
Click to expand...
Click to collapse
------Solution--------------------------------------
1. Install free "Package Disabler" Or 'Titanium BackUp' from Google Play Store.
2. Launch this app, search for "SecurityLogAgent".
3. Then disable/freeze it.
Do not do anything else. That's it.
Result: You will not see this annoying notification again.