So the screen is shattered unresponsive I was going to order a new screen from Ebay...but I noticed some of them say *Important: This Assembly Won't work with Android 4.4!!* and the screen and digitizer are for the same model...is there a way i can check via usb on my computer to check my OS? thanks in advance everyone.
samsung kies should be able to help you.
jk0l said:
samsung kies should be able to help you.
Click to expand...
Click to collapse
Thanks.:good:
Related
Really strange but every 10 minutes or so the Samsung screen comes on for no reason anything I can do to stop this?
Thanks
joliveto said:
Really strange but every 10 minutes or so the Samsung screen comes on for no reason anything I can do to stop this?
Thanks
Click to expand...
Click to collapse
Nobody has this happen?
Please provide more info. What device, rom, kernel and any mods you have applied
Sent by my Robot Butler
It's a yp-g70 firmware 2.3.5 gingerbread right out of the box
Thanks
joliveto said:
It's a yp-g70 firmware 2.3.5 gingerbread right out of the box
Thanks
Click to expand...
Click to collapse
Hmm it might be a defect with the build of the screen since it is stock out of the box if you just bought it I suggest you exchange it. If you can't return it try flashing a ROM.
Hi Xda'ians,
I have a problem with my Galaxy tab GT-7510 and would like your help/opinion/advice ...
Today, my galaxy tab screen started showing weird colors. I mean that all the black colored letters, black backgrounds had a reddish color. I have attached the snapshots of the screen image that indicate the problem. As you can see it's really difficult to use the tablet due to this problem.
I had a chat with the samsung support and they willing to check my tablet but alas, my warranty had expired and they informed me that I would have to pay 200$ for them to evaluate,replace parts and ship the tablet to me.
So questions to all --
1) Do you think it is worth paying $200 and getting my tablet repaired or is it better to get a new tablet ???
2) Has anyone experienced such a problem before and how did you get it resolved ??
3) Is there any way I can fix this problem myself with the minimal expenditure ??
Any suggestions by the community would be really very helpful !!!
PS: I have checked out videos of how to replace the screen but not sure which part needs to be replaced (i.e., digitizer/screen or LCD or some other component)
Thank you all for your help in advance !!!
--------------------------------------------------------------------------------------------
Update :
I tried flashing a stock 3.1 image on the tablet but the red color still appears. I have attached another image of the problem.
Have you tried a different ROM? Is it possible its software related?
Beezer80 said:
Have you tried a different ROM? Is it possible its software related?
Click to expand...
Click to collapse
Thanks for the suggestion, Beezer80. I tried flashing the 3.1 stock image but this does not remove the red tinge problem...
angeamon said:
Thanks for the suggestion, Beezer80. I tried flashing the 3.1 stock image but this does not remove the red tinge problem...
Click to expand...
Click to collapse
try flash another rom to see does it fic the problem
jacky9394 said:
try flash another rom to see does it fic the problem
Click to expand...
Click to collapse
Nope, flashing roms do not help as it seems to be a LCD issue. Need to open my tab up to check ..
get an ipad
angeamon said:
Nope, flashing roms do not help as it seems to be a LCD issue. Need to open my tab up to check ..
Click to expand...
Click to collapse
I had the same problem and some people I know as well. I tried everything to fix, from using the hair drier to leaving in in the refrigerator for 30 mins. Nothing works.
Please note that noone complains about ipads, and they are very good with warranties. If I ever get another tablet, it will be ipad.
Dear XDA members,
First of all, I want to apologize for my bad English...
I have an S3 with a broken screen. My phone gets on, make noises, but I have no picture.
My wife has an old S2, it is possible to connect my S3 motherboard to the display of the S2? The connectors look the same, but does it works?
I know that the resolutions of the S2 and S3 are different, but all I need to the is to make a backup. (USB port is also broken )
Thanks.
Br33ze
Br33z3 said:
Dear XDA members,
First of all, I want to apologize for my bad English...
I have an S3 with a broken screen. My phone gets on, make noises, but I have no picture.
My wife has an old S2, it is possible to connect my S3 motherboard to the display of the S2? The connectors look the same, but does it works?
I know that the resolutions of the S2 and S3 are different, but all I need to the is to make a backup. (USB port is also broken )
Thanks.
Br33ze
Click to expand...
Click to collapse
Pretty sure that would just fry the display of the s2, because it is different hardware than the s3.
Thanks for the reply...
The story continues to find a S3.
Br33z3 said:
Thanks for the reply...
The story continues to find a S3.
Click to expand...
Click to collapse
Which country are you located in?
S4??
Darke5tShad0w said:
Which country are you located in?
Click to expand...
Click to collapse
In the Netherlands!
Sorry to post in this older thread..
But do you guys know if it's posible to connect a S4 to my S3 motherboard??
Thx.
Br33z3
Br33z3 said:
In the Netherlands!
Sorry to post in this older thread..
But do you guys know if it's posible to connect a S4 to my S3 motherboard??
Thx.
Br33z3
Click to expand...
Click to collapse
Sorry I can not help you the way I had in mind.
With your original problem I would of sent you an old s3 complete screen assembly I have to either use to copy data or use permanently.
I swapped it out because of a bad glass replacement done by a local shop but it still works and functions...most of the time. Sometimes the touch doesn't work for a few seconds but the Netherlands is to far away.
Sorry for raising hope
Darke5tShad0w said:
Sorry I can not help you the way I had in mind.
With your original problem I would of sent you an old s3 complete screen assembly I have to either use to copy data or use permanently.
I swapped it out because of a bad glass replacement done by a local shop but it still works and functions...most of the time. Sometimes the touch doesn't work for a few seconds but the Netherlands is to far away.
Sorry for raising hope
Click to expand...
Click to collapse
Thanks for your help and your offer.
I can borrow a S4 or Note3, is it possible to connect one of those to my S3??
Thanks guys.
I think this won't work pretty well. I know that it is the same type of display: Super AMOLED capacitive TOUCHSCREEN, 16M colors, but the site and resolution is different. And the next question is, if the connectors really fit in!
Hi all, this may seem like a silly thing to ask but here goes....
I've got an S3 I9300 with a smashed screen. I would like to salvage my data/pics etc before I bin it.
However I can't access it via my pc as it has a screen lock that I obviously can't see or remove.
I have a spare Galaxy Ace 2 that I'm using temporarily and my question is; will the Ace 2 lcd screen plug into my S3 board temporarily
so I can retrieve my stuff?! I know I should just try it but I'd rather ask first before I waste my time stripping both phones!
Thanks for reading!
No will not work.
Different connectors and drivers.
coolhof said:
No will not work.
Different connectors and drivers.
Click to expand...
Click to collapse
Ah, ok I'll forget that idea then! Thanks for your reply.
I recently purchased a screen and digitizer assembly its from a sm g928c, I have a sm g928v I just have to know if the charge port on sm g928c is compatible with sm g928v. I would appreciate any info.
APLEDROIND said:
I recently purchased a screen and digitizer assembly its from a sm g928c, I have a sm g928v I just have to know if the charge port on sm g928c is compatible with sm g928v. I would appreciate any info.
Click to expand...
Click to collapse
The phones are physically the same, just the firmware is different.
Ouch, btw.
Planterz said:
The phones are physically the same, just the firmware is different.
Ouch, btw.
Click to expand...
Click to collapse
thanks for the info, Time to put them back together and $ell it