Screen problem - Sony Xperia Z Ultra

Sometimes my screen is touch without im touching it.. Usually happen when im typing keyboard or play game.. I dont know why.. Reboot/wipe cache and dalvik dont help.. Please anyone help? Im on exr miui v4.9.5..

Typical ASF problem. Remove it, put a tempered glass and enjoy device.
Sent from my Ultra

bioan said:
Typical ASF problem. Remove it, put a tempered glass and enjoy device.
Sent from my Ultra
Click to expand...
Click to collapse
So there is nothing wrong with my screen? Just anti shatter film?

Irwan Fauzi said:
So there is nothing wrong with my screen? Just anti shatter film?
Click to expand...
Click to collapse
Exactly. I think everyone here has faced this problem one time or the other. In my case, it happens a LOT. I just turn off screen and turn it on or just wipe it. And good to go
Sent from my C6802 using XDA Premium 4 mobile app

Ah such an annoying issue. I would love to take off the ASF but its not scratched up enough lol.

bushako said:
Ah such an annoying issue. I would love to take off the ASF but its not scratched up enough lol.
Click to expand...
Click to collapse
Yup same with me.. How about i place a new glass protector on top of asf and do a proximity calibration? This will fix the issue?

Related

does the atrix have afilm over the glass?

is there a film over the glass and if not is there a way to get rid of the tiny spot?
What tiny spot?
Sent from the coolest voided warranty phone ever.
pukemon said:
What tiny spot?
Sent from the coolest voided warranty phone ever.
Click to expand...
Click to collapse
+1 10 chars
in sunlight you can see looks like on the glass a tiny clearish white spot like pinhead size its no the display itself its the glass
Please tell me your not talking about the ffc
Sent from my MB860 using XDA App
neer2005 said:
Please tell me your not talking about the ffc
front faceing camera..lol no its on the display area of the screen i see where the ffc is
Click to expand...
Click to collapse
Might be a pocket of air or dust between your screen and glass
Sent from my MB860 using XDA App
neer2005 said:
Might be a pocket of air or dust between your screen and glass
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
any way to do anything about it without opening?
leo5111 said:
in sunlight you can see looks like on the glass a tiny clearish white spot like pinhead size its no the display itself its the glass
Click to expand...
Click to collapse
are you sure it's not a dead pixel?
Milenko2121 said:
are you sure it's not a dead pixel?
Click to expand...
Click to collapse
when i turn screen on you can see image directly behind where spot is and spot is visible with screen off
leo5111 said:
when i turn screen on you can see image directly behind where spot is and spot is visible with screen off
Click to expand...
Click to collapse
then it's dust most likely. if you didn't buy your phone new or if it was a refurb, it could've happened when they were replacing the glass. another possibility is that your phone was dropped and it let in a spec of dust.
i'd recommend taking it to an at&t store and telling them.

Broken Gorilla Glass Screen

Hey guys, I accidentally dropped my SGA and the screen cracked. It's not THAT bad, but since it has Gorilla Glass I want to know if it's repairable or what. Tomorrow, I'm going over my carrier's attention center to see if there's anything they can do about it. Any thoughts?
They can replace it. Oddly gorilla glass is really scratch resistant but super brittle.
Sent from my MB855 using xda premium
Aw man, are you serious? I thought it was unbreakable or something. And here I was going to make some tests on mine. Lmao thanks for the heads up xD
Ha ha. I hope they do fix it. 'Cause if not, I'm gonna buy a new smartphone. It wouldn't be the SGA, it had to be better. Anyway, back to topic, it seems like Gorilla Glass is TEH BRITTLE when it comes to falls. Just visit the Dell Streak forums, lol.
AlterJack said:
Ha ha. I hope they do fix it. 'Cause if not, I'm gonna buy a new smartphone. It wouldn't be the SGA, it had to be better. Anyway, back to topic, it seems like Gorilla Glass is TEH BRITTLE when it comes to falls. Just visit the Dell Streak forums, lol.
Click to expand...
Click to collapse
My friend has a dell streak and it damages the lcd every time it drops. The battery falls of easily too xD
consegregate said:
My friend has a dell streak and it damages the lcd every time it drops. The battery falls of easily too xD
Click to expand...
Click to collapse
My cover breaks my phone's fall 100% of the time XD
Sent from my GT-S5830 using XDA App
You sure its gorilla glass? On the box it says hvga tft lcd which I'm pretty sure isnt gorilla glass
Sent from my GT-S5830 using XDA App
Yup, the Corning site confirms it.
scoffyburito said:
You sure its gorilla glass? On the box it says hvga tft lcd which I'm pretty sure isnt gorilla glass
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
according to corning, its is
http://www.corninggorillaglass.com/products-with-gorilla/full-products-list
an0nym0us_ said:
according to corning, its is
http://www.corninggorillaglass.com/products-with-gorilla/full-products-list
Click to expand...
Click to collapse
Told ya! Anyway, I really want to repair my phone or I'll get another one :/
http://www.ebay.com/itm/TOUCH-SCREE...ltDomain_0&hash=item25688dbcbd#ht_1864wt_1045
I've just replaced that on mine, took about 30 mins and cost me £11
I also found this place:
http://www.tvc-mall.com/user/product.asp?skey=samsung+galaxy+ace&type=all&btn_search=
With a lot of items for the SGA, included the digitizer. So it's only the digitizer I will need?
I ordered digitiser, housing and screen (as mine had been run over by a car!!!) only the digitiser and housing needed replacing (only cos the camera lens had been scratched) screen was 100% perfect once I took the digitiser off. Have replied to your message, good luck
shanf said:
I ordered digitiser, housing and screen (as mine had been run over by a car!!!) only the digitiser and housing needed replacing (only cos the camera lens had been scratched) screen was 100% perfect once I took the digitiser off. Have replied to your message, good luck
Click to expand...
Click to collapse
now that's just crazy! how did it get run over in the first place?
Kcarpenter said:
They can replace it. Oddly gorilla glass is really scratch resistant but super brittle.
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
My girlfriend scratched hers EASILY! She put it in her pocket and took her ring off and put it in the smae and got a scratch down the screen
Supposedly, he used this guide:
http://erkinson.altervista.org/en/samsung-galaxy-ace-smontaggio-sostituzione-display-e-touchscreen/
Anyone can confirm that is safe before I even try to do it?
shanf said:
I've just replaced that on mine, took about 30 mins and cost me £11
Click to expand...
Click to collapse
where you bought? link ?
ilarrain said:
http://www.ebay.com/itm/TOUCH-SCREE...ltDomain_0&hash=item25688dbcbd#ht_1864wt_1045
Click to expand...
Click to collapse
its original gorilla glass or chinese cheap s...? it will scratches or it have same power as original?
http://www.ebay.com/itm/Touch-scree...087?pt=LH_DefaultDomain_0&hash=item2a1006369f
This has been bought up before. Its not gorrila glass. Its a miss print on the site. They said they would change it but plainly they haven't.
Sent from my GT-S5830 using xda premium

Did anyone remove shatterproof sheet before applying screen protector?

For me, I put that on top of the shatterproof sheet.
Liori said:
For me, I put that on top of the shatterproof sheet.
Click to expand...
Click to collapse
You mean that you now have 2 screen protectors ?
I was under the impression that it came with a screen protector already applied?
Sent from my LT26i using xda premium
ianford10 said:
I was under the impression that it came with a screen protector already applied?
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Correct. Its not a "shatter proof" sheet but a factory installed screen protector. There's an extra screen protector included on some markets.
Sent from my Transformer TF101 using Tapatalk
Liori said:
For me, I put that on top of the shatterproof sheet.
Click to expand...
Click to collapse
Lol always be safe but not necessary
bimmerboii said:
Correct. Its not a "shatter proof" sheet but a factory installed screen protector. There's an extra screen protector included on some markets.
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
Thanks for the clarification on this. I am fortunate to have one in the box too. Very impressed that one is installed straight out the box
Sent from my LT26i using xda premium
ianford10 said:
I was under the impression that it came with a screen protector already applied?
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Is that so? I heard that almost every Sony (Ericsson) device comes with the pre-applied shatter proof sheet and it takes some force to remove it. I might be wrong anyway.
Sent from my LT26i using XDA
So is it worth putting the included screen protector on top of the fitted one or is that just overkill?
Sent from my HTC EVO 3D X515m using xda premium
ianford10 said:
So is it worth putting the included screen protector on top of the fitted one or is that just overkill?
Sent from my HTC EVO 3D X515m using xda premium
Click to expand...
Click to collapse
No need, the one that is already applied is more than enough. Just keep it as a spare.
I dont think the screen responds as good if you put another on top
Ok thanks for the input on this, just going to stick with the factory fitted one
Sent from my LT26i using xda premium
Got mine from O2, UK. All I had was a cloudy screen film with descriptions on. I had to remove it to see the screen properly and applied the provided screen protector, and have two irritating bubbles! Would be nicer if they were all fixed on from factory. Although looking back at it, it seems like there is another layer below that - visible on left side only mainly because the screen protector isn't in perfect alignment. Bottom layer seems like it's thin piece of glass rather that plastic.
Anyone has the same as me?
I put it onto the sheet, and it works quite fine. Double protection
Sent from my LT26i using xda premium
Liori said:
Is that so? I heard that almost every Sony (Ericsson) device comes with the pre-applied shatter proof sheet and it takes some force to remove it. I might be wrong anyway.
Sent from my LT26i using XDA
Click to expand...
Click to collapse
Well I tried to take it off but it won't let go
sent from my Sony Xperia S
Has anyone removed the factory fitted protector? I generally don't use protection (hurr) and think this one just attracts more muck than anything. I've never had a problem with scratching screens so I'm not convinced it's necessary in my case.
So if anyone has removed it, is it glass? Is it difficult to remove? Was it a terrible idea?
neotarum said:
Got mine from O2, UK. All I had was a cloudy screen film with descriptions on. I had to remove it to see the screen properly and applied the provided screen protector, and have two irritating bubbles! Would be nicer if they were all fixed on from factory. Although looking back at it, it seems like there is another layer below that - visible on left side only mainly because the screen protector isn't in perfect alignment. Bottom layer seems like it's thin piece of glass rather that plastic.
Anyone has the same as me?
Click to expand...
Click to collapse
got mine from o2 too. if you look really carefully after removing the sheet with the pictures on it you will see that there is already a protector already applied.
ash_c64 said:
I dont think the screen responds as good if you put another on top
Click to expand...
Click to collapse
actually i applied 2 screen protector on it .
Indeed it is still very responsive .
Eraph said:
Has anyone removed the factory fitted protector? I generally don't use protection (hurr) and think this one just attracts more muck than anything. I've never had a problem with scratching screens so I'm not convinced it's necessary in my case.
So if anyone has removed it, is it glass? Is it difficult to remove? Was it a terrible idea?
Click to expand...
Click to collapse
I pulled it off, it is not glass. It is more difficult to remove than a standard protector.
Sent from my LT26i using xda premium
electric0ant said:
got mine from o2 too. if you look really carefully after removing the sheet with the pictures on it you will see that there is already a protector already applied.
Click to expand...
Click to collapse
Thanks for the reply!
So I have two sheets installed too!! No problems observed with touch sensitivity so I am keeping them both.
krohnjw said:
I pulled it off, it is not glass. It is more difficult to remove than a standard protector.
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
I bought a pretty expensive martin fields screen protector because I'm very scared to damage the display or ruin the quality with a cheap dealextreme screen protector.
Do you suggest I use the pre applied screen protector until there are scratches on it, pull it off with force and apply the martin fields on the glass or do i put on the martin fields screen protector straight on the pre applied one?
i heard that the pre applied one is not designed to be taken off... so i'm not really sure

2 Screen protectors?!?!

Hello guyz when i bought my phone i immediatky put a screen protector on the phone. Now it looks like there are two screen protectors on the. Was there a screen on the phone out of the box?
Greetz
Sent from my LT26i using xda app-developers app
Yes there is a shatterproof sheet stuck on the screen. It prevents pieces of the screen falling out of you drop your phone and break it.
HussainQ said:
Yes there is a shatterproof sheet stuck on the screen. It prevents pieces of the screen falling out of you drop your phone and break it.
Click to expand...
Click to collapse
But should i now take the screen protector that i put on off??
Sent from my LT26i using xda app-developers app
naaney said:
But should i now take the screen protector that i put on off??
Sent from my LT26i using xda app-developers app
Click to expand...
Click to collapse
No, leave it as it is. The pre-installed sheet is not a "protector" and it gets scratched easily. Or if you're unsatisfied with the screen's function now, remove both the preinstalled sheet and the screen protector you put on, then install a quality screen protector and that's that.
revan17 said:
No, leave it as it is. The pre-installed sheet is not a "protector" and it gets scratched easily. Or if you're unsatisfied with the screen's function now, remove both the preinstalled sheet and the screen protector you put on, then install a quality screen protector and that's that.
Click to expand...
Click to collapse
Ok thanks again
Sent from my LT26i using xda app-developers app
I applied it and the second screen protector (3M Vikuiti ADQC27) and everything is ok.

Fingerprints resistance at the new level.

The biggest problem for me in Xperia Z was "constant" dirty phone with a "full body" of fingerprints. That was a biggest minus for me on Xperia Z. And the most difficult part there was a cleaning process. Had to constantly wash it under the water.
Thinking about that, what the whole issue is a "protective film" I have decided to took it away. The problem was increased.
I hurry please you all, Xperia Z Ultra brought this problem to a minimum.
The display is much better resists fingerprints. I want to draw attention to the fact that front glass resists fingerprints far better than the back side.
My scale points is:
Xperia Z- 2/10.
Xperia Z Ultra- 8/10.
And the most good fact that you can "easily" removed them now with out any effort. (Example like on Galaxy S 4)
Regards.
Fingerprint issue?
No more problem now.
Take the device go to shower and keep clean.
Device get Hot?
No more problem now.
Take the device go to shower and stay cold.
This is why Sony xperia waterproof & dustproof but not bullet proof.
Sent from my C6802 using xda app-developers app
Bu what about scratch resistance?
Hardcore73 said:
Bu what about scratch resistance?
Click to expand...
Click to collapse
have no idea., but I think it will be better, just due to drawing stuff
is the sony logo printed on the film or the device? i just got my first scratch after a few days of using it and a really long one just recently :crying:
hazmat28 said:
is the sony logo printed on the film or the device? i just got my first scratch after a few days of using it and a really long one just recently :crying:
Click to expand...
Click to collapse
Im sory but Im sure yes
avetny said:
Im sory but Im sure yes
Click to expand...
Click to collapse
i'm guessing it's a yes to the film :crying: it's fine... how do you find the screen now?
hazmat28 said:
i'm guessing it's a yes to the film :crying: it's fine... how do you find the screen now?
Click to expand...
Click to collapse
Hey there is not a big deal! look very closely you will see protector.
So take it off and put any other.
I did that on my Z.
avetny said:
Hey there is not a big deal! look very closely you will see protector.
So take it off and put any other.
I did that on my Z.
Click to expand...
Click to collapse
It'll remove the logo too
Sent from my C6802 using Tapatalk 4
rockmaster said:
It'll remove the logo too
Sent from my C6802 using Tapatalk 4
Click to expand...
Click to collapse
Yep
avetny said:
Yep
Click to expand...
Click to collapse
And that sucks.... Why just print the logo on the film? stupid Sony
Sent from my C6802 using Tapatalk 4
kkkok8051 said:
Device get Hot?
No more problem now.
Take the device go to shower and stay cold.
Click to expand...
Click to collapse
Oww? Thermal downshock?
marc_ecko28 said:
Oww? Thermal downshock?
Click to expand...
Click to collapse
Yes, but only if you enjoy your showers at 0 Kelvin.
LordManhattan said:
Yes, but only if you enjoy your showers at 0 Kelvin.
Click to expand...
Click to collapse
Hahaha

Categories

Resources