Just thought I'd let people know of my experiences using a car charger with the USB magnetic charging cable. I have a 2.1 amp dual port USB car charger and also a Sony magnetic charging cable from my CP12 battery cover. I tried using the magnetic charging cable plugged into the car charger this morning and attached the magnetic charging end to my Xperia Z Ultra. The phone was on around 24% and started charging pretty quickly up until around 40% within probably 20mins. This is quite fast for this particular car charger as it seemed to take ages when I used to use it to charge my HTC One X with a normal micro USB cable. Anyway after it hit 40% I noticed it had stopped charging. I had a look at the charger and the power LED was off so I went to pull it out to check and noticed it was very hot! Not sure if it blew a fuse or went into thermal overload shutdown but I definitely think that it isn't really rated at 2.1amp.
Has anyone else had experiences using a car charger to charge their Xperia Z Ultra? I might just try the micro USB cable next time but I liked how quickly it charged with the magnetic charging cable.
I haven't tried it but I think the problem is the magnetic cable that you are using.
ಠ_ಠ
On mobile....
julz said:
Just thought I'd let people know of my experiences using a car charger with the USB magnetic charging cable. I have a 2.1 amp dual port USB car charger and also a Sony magnetic charging cable from my CP12 battery cover. I tried using the magnetic charging cable plugged into the car charger this morning and attached the magnetic charging end to my Xperia Z Ultra. The phone was on around 24% and started charging pretty quickly up until around 40% within probably 20mins. This is quite fast for this particular car charger as it seemed to take ages when I used to use it to charge my HTC One X with a normal micro USB cable. Anyway after it hit 40% I noticed it had stopped charging. I had a look at the charger and the power LED was off so I went to pull it out to check and noticed it was very hot! Not sure if it blew a fuse or went into thermal overload shutdown but I definitely think that it isn't really rated at 2.1amp.
Has anyone else had experiences using a car charger to charge their Xperia Z Ultra? I might just try the micro USB cable next time but I liked how quickly it charged with the magnetic charging cable.
Click to expand...
Click to collapse
I'm actually very impressed that you were able to get the magnetic cable to stay. If I am able to get the cable to stick, I can't even breathe around it.
SPtheALIEN said:
I'm actually very impressed that you were able to get the magnetic cable to stay. If I am able to get the cable to stick, I can't even breathe around it.
Click to expand...
Click to collapse
100% agree
julz said:
Just thought I'd let people know of my experiences using a car charger with the USB magnetic charging cable. I have a 2.1 amp dual port USB car charger and also a Sony magnetic charging cable from my CP12 battery cover. I tried using the magnetic charging cable plugged into the car charger this morning and attached the magnetic charging end to my Xperia Z Ultra. The phone was on around 24% and started charging pretty quickly up until around 40% within probably 20mins. This is quite fast for this particular car charger as it seemed to take ages when I used to use it to charge my HTC One X with a normal micro USB cable. Anyway after it hit 40% I noticed it had stopped charging. I had a look at the charger and the power LED was off so I went to pull it out to check and noticed it was very hot! Not sure if it blew a fuse or went into thermal overload shutdown but I definitely think that it isn't really rated at 2.1amp.
Has anyone else had experiences using a car charger to charge their Xperia Z Ultra? I might just try the micro USB cable next time but I liked how quickly it charged with the magnetic charging cable.
Click to expand...
Click to collapse
Hi Julz,
I hope your device is ok. I was using a similar charger in my car. Had two USB slots. 1amp and 2.1amp.
I'm not sure what cause it, or what happened. But I've had to send my Ultra to the store where I bought it. For some reason my device did that same as you describe. It also wouldn't stop the LED from showing. Meaning that it thought it was charging all the time. (even when not plugged in)
Now amps should be fine. Its the volts that you have to worry about. I posed a thread about batteries that talks about amps volts and how to look after your device... take a look
LINK:
http://forum.xda-developers.com/showthread.php?t=2505165&highlight=battery
check it out...
I have been using my Magnetic charging cable ( I pulled out of my Sony DK30 )
in my car for over a month with the Griffin PowerJolt Micro & have not had a
single issue with the phone or the charger . here are the specs & a pic of the charger .
Technical Specifications
Input: 12 volts DC
Output: 5 volts DC at 2.1 amps
Output power: 10 watts link to charger .
link to charger =
http://store.griffintechnology.com/ipad/powerjolt-micro-ipad
Yeah I think the generic no name chargers probably lack quality circuitry to regulate the charging properly. I'm hoping the Xperia Z Ultra has some decent built in charging protection to prevent issues with minor spikes or fluctuations. Brand name chargers like griffin should be ok.
Similarly, been using the magnetic cable with a griffin car adapter without any problems since I got my unit.
Magnetic USB Charging Cable, some one will try it?
http://dx-box.com/high-performance-...e-magnetic-connection-and-charging-speed.html
I will not touch a third party charger. I want to buy the DK30/Dk31 dock and take it apart for the EC21 cable but I'm not sure if its compatible? Does Somebody know maybe?
The page doesn't load for me, but I'd trust the microUSB -> Magnetic convertors over the entire charger. That way you can use the OEM charger or another high quality charger.
A lot of brandless chargers are made lower quality and that can lead to issues where phones "explode". Odds are, whenever you read about a person's phone exploding they were probably using a knockoff charger.
The adapters shouldn't be a problem. It's just a simple wire-to-wire exchange. No circuits.
Something like this
http://www.amazon.com/Magnector-Per...1144360&sr=8-1&keywords=magnetic+charger+sony
EDIT: I got a kick out of "Reverse Attachment Charging Protection", because the charging holes are just different sizes.
My Z1 magnetic charging cable works although it is a tad more easy to dislodge compared to when I was using it on my z1
I have THIS http://www.clove.co.uk/microusb-to-magnetic-connector-adapter and I must say it doesn't work perfectly. The adaptater doesn't 'grip', it stays in place only if you put you Z3 down.
jonshipman said:
A lot of brandless chargers are made lower quality and that can lead to issues where phones "explode".
Click to expand...
Click to collapse
OF COURSE. There are phones exploding just everywhere; you just cannot leave the house without ear protectors because there's exploding phones all around you.
Honestly; I am so sick of reading that "exploding phone" stories over and over. Same with stolen kidneys and similar paramountly believable urban legends.
Is this the charger wich comes with z3 in box ?
Quick Charger EP881
I cant find spec for this,is this the 2A or 1.5A ?
fain2daniel said:
Is this the charger wich comes with z3 in box ?
Quick Charger EP881
I cant find spec for this,is this the 2A or 1.5A ?
Click to expand...
Click to collapse
believe its 1.5A based on the same code found on other sony country sites.
http://www.sony.com.sg/product/ep881
however, lazy to check if its the same model that comes with the Z3 although i believe it should be!
This is the one my Z3 came with. T-mobile Netherlands model.
^
This is 2.5A fast charger wich is great.How much time it needs to 100% charge the battery?Im geting mine tomorrow,hope that comes with same charger.
I'm pretty sure it is 1,5A. Charged my device only once with it and I was surprised with the speed. Will do a timed run next time round.
fain2daniel said:
^
This is 2.5A fast charger wich is great.How much time it needs to 100% charge the battery?Im geting mine tomorrow,hope that comes with same charger.
Click to expand...
Click to collapse
the picture clearly reads 1500mA and that's what it is. This charger was included with my z3 as well.
2.30h to fully charge the batery with original 1.5A charger.Its not so bad.
EP880 is 1.5A, and is what came with my Z3. I'm intrigued to know what the 881 is.
In fact, given its support of Quick Charge 2.0, I am hopeful of Sony releasing a new PSU that can detect a QC2 compatible device and up the power further. So far I can only find one from Motorola and it's not on sale outside the US (that I can see).
Hi All,
Thought I'd give my review of two different magnetic cables I've purchased from my Xperia Z3.
Firstly, I purchased a £3 magnetic cable from Ebay which was utterly a waste of money! Soon as you picked the phone up or touched it the connection port would move up or down. I contacted the seller who is sending me a replacement so will see if this is any better.
Now on to the more expensive magnetic cable but with a twist.
This magnetic cable I purchased from Amazon had great reviews from previous Z2 users. Now I wasn't sure if it was Z3 compatible but turned out the ports are the same for Z2 and Z3. So I purchased the item from Flubit as you get a little discount if they can get a deal for you and it arrived within 2-3 working days.
Item name: [ Magnector X ] High Performance Universal Sony Xperia Z1 & Z2 & Z3 Charging Adapter for Micro USB Cable - Enhanced Magnetic Connection and Charging Speed [ Black ]
This product felt more durable and solid when taking it out of the mildly fancy packaging. The product itself isn't connected to a cable but has a micro usb port which you attach your original Sony cable to. (unfortunately I need 10 posts before i can show pics but just check it out on Amazon. I tried it for the first time last night as my phone stays next to my pillow and it seems to do the trick as it didn't fall off even with my cheapy case attached to it in the morning.
As the saying is, buy cheap...buy twice! Hope this review helps anyone on making a decision between the cheap ones and expensive ones.:good:
figo_rulz11 said:
Hi All,
Thought I'd give my review of two different magnetic cables I've purchased from my Xperia Z3.
Firstly, I purchased a £3 magnetic cable from Ebay which was utterly a waste of money! Soon as you picked the phone up or touched it the connection port would move up or down. I contacted the seller who is sending me a replacement so will see if this is any better.
Now on to the more expensive magnetic cable but with a twist.
This magnetic cable I purchased from Amazon had great reviews from previous Z2 users. Now I wasn't sure if it was Z3 compatible but turned out the ports are the same for Z2 and Z3. So I purchased the item from Flubit as you get a little discount if they can get a deal for you and it arrived within 2-3 working days.
Item name: [ Magnector X ] High Performance Universal Sony Xperia Z1 & Z2 & Z3 Charging Adapter for Micro USB Cable - Enhanced Magnetic Connection and Charging Speed [ Black ]
This product felt more durable and solid when taking it out of the mildly fancy packaging. The product itself isn't connected to a cable but has a micro usb port which you attach your original Sony cable to. (unfortunately I need 10 posts before i can show pics but just check it out on Amazon. I tried it for the first time last night as my phone stays next to my pillow and it seems to do the trick as it didn't fall off even with my cheapy case attached to it in the morning.
As the saying is, buy cheap...buy twice! Hope this review helps anyone on making a decision between the cheap ones and expensive ones.:good:
Click to expand...
Click to collapse
I also just got this cable through today and its fantastic.
Avoid the cheap ones.
Got one first thing Monday morning via Amazon and super impressed because I ordered it at 6.55pm on Sunday night!
http://www.amazon.co.uk/gp/product/B00H2EEB4S/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I got mine from Amazon (Prime) but there was only one in stock and I got it, so now it's showing from another supplier.
It's great! I had two unknown Chinese-made ones before, and both struggled to stick to my Z2 or Z3, causing all sorts of weird issues (mostly that of what it would be like to attach and detach the lead repeatedly). They're now history.
So far this is clamping on so solid that there's no chance of that happening, and I always 'rotate' the magnetic chargers off so no chance of pulling out the connector.
I also got the official dock, but at £20-odd at a time (and I now have a mountain of docks because all I need are the inserts, not a new dock for each phone) I will probably get one or two more of these. The dock by the bedside and these around the house and at work.
Hi what's do you mean by rotate to keep it secured?
When taking off I simply fold/twist it back rather than pull it off and risk damage, given how strong the magnetic force is.
I have bought this one on ebay , "Magnetic Charging Dock Cradle Desktop Charger for Sony Xperia Z3 and Z3 Compact" for about 10 euro's (incl sending)
it works nice , you don't need to open the covers each time.
I wanted to buy a magnetic charging adapter. Could anyone please let us know about the performance of magnetic charger adapter? Is it charge fast or slow compared to micro USB charger cable? It would be great if you could share your experiences on using the respective brands of magnetic charging adapter so that I can choose the best one.
If you use the cable and the adaptater given with the phone...
Then for me it's the same thing with the DK48 and the live view case
Tablet is a rooted Verizon Xperia Z2.
If it's powered on it will not charge with original stock USB charger or a generic magnetic dock charger.
If I turn it off it charges perfectly with either charger.
What could be wrong?
Try Ampere app to see what's the tablet measuring!
I just bought an ebay refurb Z2 and mine won't charge with the usb or magnetic cable unless it's totally shut down. Won't even charge in standby mode with the screen off. Did you find a solution?
Phrancis5 said:
I just bought an ebay refurb Z2 and mine won't charge with the usb or magnetic cable unless it's totally shut down. Won't even charge in standby mode with the screen off. Did you find a solution?
Click to expand...
Click to collapse
Had the same problem on KitKat 4.4.4., but after flashing Lollipop 5.1.1. It worked....
Hmmm, with my own cable (not original) I had the same problem in the past.
But when I used the original Sony cable, it worked well. !?!?!?