CyanogenMod 12.1 unofficial daily builds
CyanogenMod is a free, community built, aftermarket firmware distribution of Android
REMEMBER:
That for CM Team this is still a work in progress, and CM Team does not offer support to any kang build. If one day will not appear it means that source was not buildable. On early builds some things might be, and possibly will be broken - you should not have any expectations, for now we can just watch the process of rebasing into new mr1 code. I will also try to fix some things while testing
CHANGELOG:
All the source code for CyanogenMod is available in the CyanogenMod Github repo or visit out Gerrit Code Review for a up to date changelog.
DOWNLOADS:
CM12.1-hammerhead
INSTRUCTIONS:
- latest TWRP is higly recomended
- DO NOT WIPE YOUR INTERNAL STORAGE
- factory reset
- flash build
- flash gapps
- Enjoy!
Recommended GAPPs?
BlackVoid said:
Recommended GAPPs?
Click to expand...
Click to collapse
any 5.1 ones
Does this mean calls work everything wifi and play store without gapps?
If means that it's not a daily driver in any way and for now, there are many changes being pushed all the time. However all hardware is working fine
Downloading first cm 12.1, thanks for your job.
should wait for Official, but thanks for sharing.
turydios said:
Downloading first cm 12.1, thanks for your job.
Click to expand...
Click to collapse
Please keep us posted on how it is on 5.1. Can hardly wait for the issues to get sorted out and nightly builds to come out!!
mikegapinski said:
If means that it's not a daily driver in any way and for now you can't make a single call. Will be fixed in a few days, there are many changes being pushed all the time
Click to expand...
Click to collapse
lol, for me it works and the ROM is fairly stable, but it's likely because I'm using CAF source for my builds.
New cyanogen bootanimation includes?
So is are we able to make calls and send sms with this rom?
thanks
r1c4rd0 said:
So is are we able to make calls and send sms with this rom?
thanks
Click to expand...
Click to collapse
There's a post on the 1st page, and theres only 2 pages in this thread...
In short, no.
mikegapinski said:
If means that it's not a daily driver in any way and for now you can't make a single call. Will be fixed in a few days, there are many changes being pushed all the time
Click to expand...
Click to collapse
Koragg618 said:
There's a post on the 1st page, and theres only 2 pages in this thread...
In short, no.
Click to expand...
Click to collapse
New build is on buildbox now, expected to roll out in a few hours after test
I've found a issue with RIL, CM is basing on CAF telephony - they have not updated the ril api to 11 like AOSP did - all it means that all other CM 12.1 builds base on 5.0.2 blobs not the 5.1 ones like I did. Merged new stuff from AOSP mr1 into cm12.1 staging branch, all should get back in place now
And calls work wifi and sms? Almost daily driver?
cell2011 said:
And calls work wifi and sms? Almost daily driver?
Click to expand...
Click to collapse
It should be all working in current build with 5.1 libs from AOSP, meantime CM will need to rebase telephony on their own.
Will update with progress anytime now
Today's build is up on server - all is working like it should(telephony is fixed with AOSP 5.1 libs).
Happy flashing
Im stuck at just a sec screen is gapps included or needed and which ones? All is good just rebooted phone and flashed minimal gapps 5.1
mikegapinski said:
Today's build is up on server - all is working like it should(telephony is fixed with AOSP 5.1 libs).
Happy flashing
Click to expand...
Click to collapse
The network works
Whats a good kernel for this?
Related
New nightly unofficial builds of CM 12.1 for Nexus 5 (hammerhead). These are built straight from Cyanogenmod's repository at https://github.com/CyanogenMod/android/tree/cm-12.1. There are no modifications, or cherry picks from other related repositories. This is just a straight up, pure Cyanogenmod build for Nexus 5 hammerhead, NOT CAF, that I am privately building for my own use, and sharing with other users until the official builds start rolling out. I am not a developer. I am just a user who likes to flash a nightly update every day, if possible. For tutorials on how to install the rom or questions, I suggest using the OP in this excellent thread: [ROM] [LMY47I] [5.1] CM12.1 Unofficial w/ Xtra Cherries-Hammerhead Nexus 5 by mo976.
As far as answering questions, I may jump in from time to time, but I'll leave it mostly to those visiting the thread. Again, I merely made a place to share the cm rom I am just compiling from source.
Download Latest Build
Changelog
reserved
Fisrt!
Thanks for the hard work!! Using it since 2 days, works like a charm, stable, fast and the battery life is a big change for me! I'm lovin it! ^^
Cherryies Indeed worth flashing.
---------- Post added at 06:10 PM ---------- Previous post was at 06:04 PM ----------
advantages of relatively 5.1_r3？
will try your rom and report if needed ! thx
where can i find a changelog for CM12.1 like cmxlog.com ?
edit: for noobs like me, update the bootloader first, get the new one there : http://forum.xda-developers.com/goo...hable-zip-android-l-radio-bootloader-t2958222
edit2: those gapps work well : https://www.androidfilehost.com/?fid=95916177934550851
new update in the OP
Is it based on hammerhead or hammerheadcaf? thanks in advance for your work, i really appreciate this!
blackbird5308 said:
Is it based on hammerhead or hammerheadcaf? thanks in advance for your work, i really appreciate this!
Click to expand...
Click to collapse
hammerhead
tnpapadakos said:
hammerhead
Click to expand...
Click to collapse
thanks, flashing immediately!
I cannot boot with elementary kernel but Swype crash is gone
It´s posible to receive official cyanogenmod OTAs in the future with this rom?
jlmcr87 said:
It´s posible to receive official cyanogenmod OTAs in the future with this rom?
Click to expand...
Click to collapse
this is a private build of cyanogenmod...when team cyanogen starts building 12.1 for hammerhead, then the OTA will work
tnpapadakos said:
NO, this is a private build of cyanogenmod...when team cyanogen starts building 12.1 for hammerhead, then the OTA will work
Click to expand...
Click to collapse
So if i install your rom, it will update to official cyanogenmod nyghtlies in the future?
I don´t understand you, first say NO and finally yes.
jlmcr87 said:
So if i install your rom, it will update to official cyanogenmod nyghtlies in the future?
I don´t understand you, first say NO and finally yes.
Click to expand...
Click to collapse
i've been hanging out with my girlfriend too much lately...lol
tnpapadakos said:
this is a private build of cyanogenmod...when team cyanogen starts building 12.1 for hammerhead, then the OTA will work
Click to expand...
Click to collapse
tnpapadakos said:
i've been hanging out with my girlfriend too much lately...lol
Click to expand...
Click to collapse
This is not bad....
thank you for the new build and hope it is not so slow like before
First of all, thanks! Second: what about MultiROM?
GPS question
First off, thank you to the OP. The consistent nightly builds are much appreciated!
Second, has anyone had issues with their GPS on cm12.1? Mine will lock on and be fine for a few minutes, then it loses GPS signal for a few minutes, then locks, then loses, repeat.
Wondering if it is just me or not...
have not noticed any issues with my GPS; don't know anything about multi-rom
hit the thanks button if you can rather than posting a thanks (it is appreciated, though )
Can anyone open the calculator? On 0416 and it just force closes. Going to try upgrading in a bit. Sorry about not asking in the dedicated thread. Didn't notice until after posting.
Hi I have installed cm13 stable rom for about a week and haven't received any updates yet .when I check for updates their is nothing their.I'm not sure if I'm doing something wrong or their are not any updates available does anyone know iff development is still on going for this rom thanks.
Update didnt work for me just keep checking the cm13 forum. The last update was March 20 and zero issues so far.
Exodusche said:
Update didnt work for me just keep checking the cm13 forum. The last update was March 20 and zero issues so far.
Click to expand...
Click to collapse
Thanks mine is working fine also I'll just keep checking the page I downloaded from.
OTA is not implemented yet on cm13. So you have to manually download and install it.
OTA is implemented when the CM13 becomes an official nightly. I think this is a matter of months.
koen12333 said:
OTA is implemented when the CM13 becomes an official nightly. I think this is a matter of months.
Click to expand...
Click to collapse
i dont know much about this but all i know is we have to submit the built to the cyanogenmod website and they do some tests and make it official
so all i wanted to know if we have a working cm for oneplus x , has any dev. send it to cyanogen ?
if no can we send it ?
abhi.jangid15 said:
i dont know much about this but all i know is we have to submit the built to the cyanogenmod website and they do some tests and make it official
so all i wanted to know if we have a working cm for oneplus x , has any dev. send it to cyanogen ?
if no can we send it ?
Click to expand...
Click to collapse
This isn't how it works... When you start development for a device under CM sources, CM forks your device tree and kernel. From there proper patches and everything that needs to be changed on their side is made. We are waiting for them to merge tristate options... Considering the patch set was last from the 31st I'm a bit worried. Ashwin continues to update sources on his side, but that is the last I've seen from CM. In other words, have patience. It will come eventually
RJDTWO said:
This isn't how it works... When you start development for a device under CM sources, CM forks your device tree and kernel. From there proper patches and everything that needs to be changed on their side is made. We are waiting for them to merge tristate options... Considering the patch set was last from the 31st I'm a bit worried. Ashwin continues to update sources on his side, but that is the last I've seen from CM. In other words, have patience. It will come eventually
Click to expand...
Click to collapse
ohh thanks for the info i didnt know that. so far what i have understood is u guys are working on it and already contacted cm to make it official ,isn't it ?
abhi.jangid15 said:
ohh thanks for the info i didnt know that. so far what i have understood is u guys are working on it and already contacted cm to make it official ,isn't it ?
Click to expand...
Click to collapse
It is being worked on and will eventually go official
This is CyanogenMod, recompiled from Seraph08 sources with (also selfcompiled) Uber Toolchain 4.9. If there are Bugs, they should be identical to Seraph08 version. If there are additional Bugs only to be found in this ROM, please let me know.
One thing though: I'm not a developer. I just recompiled the ROM. So if someone finds a bug and has an idea how to fix it, please tell me.
Sources:
Please see thread of Seraph08, to be found here: http://forum.xda-developers.com/oneplus-2/development/6-0-x-cyanogenmod-13-oneplus-2-t3292436/
Download:
https://www.androidfilehost.com/?w=files&flid=132037
Opengapps:
http://opengapps.org
SuperSU: https://download.chainfire.eu/supersu (will redirect you to the latest version)
XDA:DevDB Information
CyanogenMod 14.1, ROM for the OnePlus 2
Contributors
dansou901, Seraph08, Grarak, Mahdi768
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Testing
Beta Release Date: 2016-12-16
Created 2016-11-27
Last Updated 2016-12-16
For updates, dirty flash (if you are coming from a previous version of exactly this ROM) should be fine, but format system and cache before you flash. First boot will take 5-10 minutes, depending on how many apps you have installed (more apps = longer first boot).
If there is no changelog for a new build, have a look at https://www.cmxlog.com/14.1/oneplus2/ and https://github.com/Seraph08/device_oneplus_oneplus2/commits/cm-14.1.
12.12.2016:
- alert slider is fixed (was broken in build of 6th December)
- updated to Android 7.1.1
05.12.2016:
- SELinux back to permissive
01.12.2016:
- SELinux is enforcing now (V4A users beware)
- Latest version of SuperSU won't break sensors anymore
Some specs of rom would be great
22vlaja said:
Some specs of rom would be great
Click to expand...
Click to collapse
What do you want to know?
New build is up!
dansou901 said:
New build is up!
Click to expand...
Click to collapse
Change log??
Wilguens Joachin said:
Change log??
Click to expand...
Click to collapse
Have a look at Seraphs thread, but SELinux is permissive again (he explains there why). If you want a full changelog of CM, look at https://www.cmxlog.com/14.1/.
Sorry to all but I had to take down the latest build, the alert slider isn't working there. As soon as it's fixed, I'll recompile and reupload. Thanks @KarlDieter for finding this!
dansou901 said:
Sorry to all but I had to take down the latest build, the alert slider isn't working there. As soon as it's fixed, I'll recompile and reupload. Thanks @KarlDieter for finding this!
Click to expand...
Click to collapse
Damn, I just flashed it too lol
Can I dirty flash the Uber version over regular seraph's CM?
Edit: I tried, seems to be working so far.
knpk13 said:
Can I dirty flash the Uber version over regular seraph's CM?
Edit: I tried, seems to be working so far.
Click to expand...
Click to collapse
Thanks for trying out, does everything work for you? I did a clean flash myself, so I can't tell.
What are the advantages of these builds over the official ones? Only UberTC?
Claudiosvs said:
What are the advantages of these builds over the official ones? Only UberTC?
Click to expand...
Click to collapse
It's the sources by Seraph08 and UberTC.
New build is there, thanks @Seraph08 again for the help!
dansou901 said:
New build is there, thanks @Seraph08 again for the help!
Click to expand...
Click to collapse
Please also update the thread title (date). Because otherwise we dont know when there are updates available.
thx
bani1994 said:
Please also update the thread title (date). Because otherwise we dont know when there are updates available.
thx
Click to expand...
Click to collapse
Done, thanks for the hint
New build is up!
Sorry for the noob question but... what are the advantages to use a UBER compiled ROM instead of another one?
aroblu94 said:
Sorry for the noob question but... what are the advantages to use a UBER compiled ROM instead of another one?
Click to expand...
Click to collapse
It boosts up the performance a bit and it's smoother.
dansou901 said:
It boosts up the performance a bit and it's smoother.
Click to expand...
Click to collapse
Well, so why someone still uses another compiler?
Thanks for the answer
The goal here is both is to play with features which could be later be backported to official kernels, but also ones that probably shouldn't (like fast charging).
I'm basing my work on some existing kernels, but putting a little tuning here and there and making available via anykernel (3, currently) zippable installers. Currently there's only one maintaned branch, for LineageOS 17.1 and derivatives (success reports comes from LoS 15.1 to Non-LOS based roms, YMMV).
Contributors and testers are always welcome.
Due credit to karthik km for his miracledroid kernel and nicknitewolf for his kernel, rom and all his contributions in having our wt88047 devices up-to-date.
XDA:DevDB Information
PolesApart Kernel, Kernel for the Xiaomi Redmi 2
Contributors
PolesApart
Source Code for current branch: https://github.com/polesapart/android_kernel_wingtech_msm8916/commits/lineage-17.1
Downloads: https://github.com/polesapart/android_kernel_wingtech_msm8916/releases
Kernel Special Features: Anykernel 3 Installers; DT2W; KCAL; LiveDisplay; Fast Charging; Wireguard.
Version Information
Status:Gamma (17.1 branch)
Created 2018-07-23
Last Updated 2020-06-01
Reserved
For Changelog, See the github's releases page.
Reserved
Thanks
can i install this kernal on aosp based roms or only for lineage based?
Thanks for your great works
I wish the source updated with the patches that you applied into it, so it will be easier to read and track
Dan_nomad said:
can i install this kernal on aosp based roms or only for lineage based?
Click to expand...
Click to collapse
You'd have to try. If it doesn't work, then you need to flash the rom again or extract the boot.img from the rom's zip and apply via fastboot.
didhiy said:
Thanks for your great works
I wish the source updated with the patches that you applied into it, so it will be easier to read and track
Click to expand...
Click to collapse
The zram branch is up to date. The miracledroid will be when I release anything from it. I'm currently trying a build from the latter(with zram updates) , and the battery consumption when idle seems way better. If I don't catch anything wrong I'll release a build this week.
PolesApart said:
The zram branch is up to date. The miracledroid will be when I release anything from it. I'm currently trying a build from the latter(with zram updates) , and the battery consumption when idle seems way better. If I don't catch anything wrong I'll release a build this week.
Click to expand...
Click to collapse
I mean the commits here:
https://github.com/polesapart/android_kernel_wingtech_msm8916/commits/lineage-15.1
It should represent the changes that you've done into it. It's better than packed your changes as a separate patches zip.
didhiy said:
I mean the commits here:
https://github.com/polesapart/android_kernel_wingtech_msm8916/commits/lineage-15.1
It should represent the changes that you've done into it. It's better than packed your changes as a separate patches zip.
Click to expand...
Click to collapse
In my tree, lineage-15.1 branch will always be even with upstream. That helps me merging. What you're looking for is available both in:
https://github.com/polesapart/android_kernel_wingtech_msm8916/commits/lineage-15.1-polesapart-zram
and in: https://github.com/polesapart/andro.../commits/lineage-15.1-polesapart-miracledroid - but the latter is out of sync, as I tried to explain earlier.
I'll update these URLs on the OT.
PolesApart said:
The zram branch is up to date. The miracledroid will be when I release anything from it. I'm currently trying a build from the latter(with zram updates) , and the battery consumption when idle seems way better. If I don't catch anything wrong I'll release a build this week.
Click to expand...
Click to collapse
PolesApart said:
In my tree, lineage-15.1 branch will always be even with upstream. That helps me merging. What you're looking for is available both in:
https://github.com/polesapart/android_kernel_wingtech_msm8916/commits/lineage-15.1-polesapart-zram
and in: https://github.com/polesapart/andro.../commits/lineage-15.1-polesapart-miracledroid - but the latter is out of sync, as I tried to explain earlier.
I'll update these URLs on the OT.
Click to expand...
Click to collapse
Yaay... I didn't see that branch LOL thanks for your explanation :good:
The 1st build based on miracledroid is now public: https://github.com/polesapart/andro...m8916/releases/tag/20180725-miracledroid-zram
I'm testing (most of) it on my LOS 15.1 stock rom for a few days now and it's smooth.
PolesApart said:
The 1st build based on miracledroid is now public: https://github.com/polesapart/andro...m8916/releases/tag/20180725-miracledroid-zram
I'm testing (most of) it on my LOS 15.1 stock rom for a few days now and it's smooth.
Click to expand...
Click to collapse
Ohhh nooo,headphone is not with this kernal:crying:
Rbqttp said:
Ohhh nooo,headphone is not with this kernal:crying:
Click to expand...
Click to collapse
Yes, this is a heisenbug that manifests every now and then (half the time I change something and rebuild the kernel). I've uploaded another build that works for me, please try it:
https://github.com/polesapart/andro...m8916/releases/tag/20180725-miracledroid-zram
PolesApart said:
Yes, this is a heisenbug that manifests every now and then (half the time I change something and rebuild the kernel). I've uploaded another build that works for me, please try it:
https://github.com/polesapart/andro...m8916/releases/tag/20180725-miracledroid-zram
Click to expand...
Click to collapse
Headphone jack works normally... I like the features in this build, thanks for bring up a custom kernel for us :highfive:
Do you plan to include Wireguard in the kernel?
https://forum.xda-developers.com/android/development/wireguard-rom-integration-t3711635
*update* Wireguard module is available in the kernel available here https://github.com/polesapart/andro...m8916/releases/tag/20180725-miracledroid-zram
@PolesApart an aroma based installer will be nice , i knw its too early, but jst a suggestion. Keep up the gud work bro.:good:
Can i install this on offcial lineageos 15 in my 1gb model redmi 2
Vikhyat01 said:
Can i install this on offcial lineageos 15 in my 1gb model redmi 2
Click to expand...
Click to collapse
Yes , you can.:good:
Will it work on RR oreo
LineageOS 16.0
"LOS is a free, community built, aftermarket firmware distribution of Android 9 (pie), which is designed to increase performance and reliability over stock Android for your device"
I'll build when weekend starts. This rom uses oreo/treble base and Extreme Plus kernel source.
Working
Everything
Bugs
Network traffic indicators (related to LOS source)
Links
Build 01/05
Build 12/30
Build 12/21
Build 12/15
Sources
https://github.com/LineageOS
https://github.com/kjjjnob
Credits
chirayu19091997
Kshitiz Deep
GeneticEnginer
Reserved
sir we will get update through ota or we have to download and flash manually
thanks in advance
shaikjaved_786 said:
Reserved
sir we will get update through ota or we have to download and flash manually
thanks in advance
Click to expand...
Click to collapse
Hello! You need download and flash manually. I'll update today
Thnx for this awesome rom.
Hope you continue working on it..
Btw can you add CAF tags which the genetic engineer has added into sacredos..?? Will it have any advantage?
Update
Build 12/21 (Happy christmas!)
- Kernel upstream to .131
- Synced to latest Lineage changes (network traffic still bugged)
Link
Saadatrm said:
Thnx for this awesome rom.
Hope you continue working on it..
Btw can you add CAF tags which the genetic engineer has added into sacredos..?? Will it have any advantage?
Click to expand...
Click to collapse
I dont know how is working CAF, for now this branch works well! Thanks!
kjjjnob said:
Build 12/21 (Happy christmas!)
- Kernel upstream to .131
- Synced to latest Lineage changes (network traffic still bugged)
Link
I dont know how is working CAF, for now this branch works well! Thanks!
Click to expand...
Click to collapse
Will download n test the new version soo.. Thnx ?
Volte not working here..
Tried bholte fix n VoEnabler..no luck..
N how to turn off the navigation bar?
Saadatrm said:
Volte not working here..
Tried bholte fix n VoEnabler..no luck..
N how to turn off the navigation bar?
Click to expand...
Click to collapse
Sc: https://t.me/g5splus
Saadatrm said:
Volte not working here..
Tried bholte fix n VoEnabler..no luck..
N how to turn off the navigation bar?
Click to expand...
Click to collapse
Check the Yoga answer. I cant do nothing with Volte, here in my country dont use that. You can find help on Telegram group.
12/30 UPDATE
Link
Changelog
Synced with latest LineageOS source
Well guys, maybe i'll compile anothers build more and then stop. I don't have more my sanders, moved to whyred. I can build roms, but if a error appears I don't have more time to solve!
HAPPY NEW YEAR! :victory:
Hello Dev can u make this ROM for official lineage
Can any confirm if volte is working on the new build
maahirgoswami said:
Hello Dev can u make this ROM for official lineage
Click to expand...
Click to collapse
I dont have more my sanders, im now with Xiaomi bro
Saadatrm said:
Can any confirm if volte is working on the new build
Click to expand...
Click to collapse
I cant test, i dont have the device anymore and here we dont use volte
Build 01/05/19
Synced with latest LOS sources
Link
Enjoy guys :fingers-crossed:
kjjjnob said:
Build 01/05/19
Synced with latest LOS sources
Link
Enjoy guys :fingers-crossed:
Click to expand...
Click to collapse
Can you add new camera blobs from the stock rom for better camera performance..
Build 10/13
- Synced with LOS (Android 9.0.0_r30) Maybe network traffic work, idk.
- Reworked some things on device (Arrow fork)
- Synced latest vendor changes
REMOVED
Saadatrm said:
Can you add new camera blobs from the stock rom for better camera performance..
Click to expand...
Click to collapse
Blobs updated, check latest build!
Dont boot! I'll reset last changes on vendor
kjjjnob said:
Blobs updated, check latest build!
Dont boot! I'll reset last changes on vendor
Click to expand...
Click to collapse
I don't understand, volte works for me on every treble rom except your rom even after flashing bholte fix...
I know you cant check it..
Still just mentioning
https://forum.xda-developers.com/moto-g5s-plus/development/crdroid-5-0-pie-t3871312
Can you please look into the new crdroid for fully functional volte...