[D5833][5.0.2] 23.1.A.0.690_R9C [SuperSU/AndroPlusKernel] - Xperia Z3 Compact Android Development

Hi guys!
I know there are fellow impatient D5833 owners out there who are tired of waiting for lollipop and want to try it out already, so I made this ROM. Tried and tested. Please report any bugs.
This is not the official FW from Sony for D5833. I am using the D5803 stock firmware.
Backup! If you want to downgrade back to KitKat you are going to have to do so using Flashtool, you will lose all data.
Do not install on encrypted devices.
Flash this ROM at your own risk. I am not responsible for any damage.​
Info:
Customized NCB_1288-5411_23.1.A.0.690_R9C
SuperSU-v2.46
AndroPlusKernel v50a
Required:
- Full root on KitKat (Stock - 23.0.A.2.93/23.0.1.A.5.77) with recovery.
- Unlocked bootloader.
Installation:
1. Download zip.
2. Enter recovery and wipe cache and dalvik cache.
3. Flash zip.
4. Reboot.
Download
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshots
Credits:
Chainfire - SuperSU
zxz0O0 - PRFCreator
AndroPlus - AndroPlusKernel

To be edited

1) You should indicate that this is for unlocked bootloader only, not for all.
If you flash this on a locked bootloader, you'll get a blank screen or a bootloop.
2) I guess this should be in development section
3) What about basebands? D5833 works on different LTE frequencies...

Can you add the mods you use
Sent from my D5803 using XDA Free mobile app

Link is up!
istux said:
1) You should indicate that this is for unlocked bootloader only, not for all.
If you flash this on a locked bootloader, you'll get a blank screen or a bootloop.
2) I guess this should be in development section
3) What about basebands? D5833 works on different LTE frequencies...
Click to expand...
Click to collapse
Oops, forgot to mention that. The thread is moved in the correct section, my mistake
Regarding the baseband, I've experience no problems using C Euro/Nordic D5803 basebands on D5833. I could not get 4G on Israel, USA, SA, Turkey. I'm on EE 4G network in United Kingdom. I found that my 4G is faster on this baseband after testing with speedtest
lamducthien said:
Can you add the mods you use
Sent from my D5803 using XDA Free mobile app
Click to expand...
Click to collapse
I haven't added any, this is pure stock. Apart from R/W on sys fix, kernel and root

I have backup in the Backup and Restore app and i'm aware i need a locked bootloader to use it though. Can i relocked my bootloader after a successful reboot? Is there any consequence?

solidghost9 said:
I have backup in the Backup and Restore app and i'm aware i need a locked bootloader to use it though. Can i relocked my bootloader after a successful reboot? Is there any consequence?
Click to expand...
Click to collapse
Is this the only backup that you have? I'm pretty sure that the Backup and Restore app isn't working because of no DRM keys.
I'd advise you to move that backup data onto your PC, and then try the DRM function restoration by jimRnor

FW android 5 D5833
Hi man, thanks for your effort, I have a D5833.
My device is rooted, locked bootloader (DRM intact) and the 23.0.A.2.106 version, which is the downgrade made in the process (http://forum.xda-developers.com/z3-compact/general/how-to-root-backup-drm-keys-t3013343).
By the requirements this tutorial would not work on my phone. Is how you do a firmware (D5833) Android 5 pre-rooted?

Hi,
Is it possible to flash this ROM over Cyanogenmod 12?
If not, what steps are necessary to do this? My bootloader is unlocked.
Thanks!

Santos8913 said:
Hi man, thanks for your effort, I have a D5833.
My device is rooted, locked bootloader (DRM intact) and the 23.0.A.2.106 version, which is the downgrade made in the process (http://forum.xda-developers.com/z3-compact/general/how-to-root-backup-drm-keys-t3013343).
By the requirements this tutorial would not work on my phone. Is how you do a firmware (D5833) Android 5 pre-rooted?
Click to expand...
Click to collapse
I didn't use that method, I backed up my DRM keys and used http://forum.xda-developers.com/z3-compact/development/to-drm-keys-unlock-bootloader-custom-t3065914 to restore DRM functions. Since this rom has AndroPlus in the zip, relocking the BL is going to result in bootloops
dhvenus said:
Hi,
Is it possible to flash this ROM over Cyanogenmod 12?
If not, what steps are necessary to do this? My bootloader is unlocked.
Thanks!
Click to expand...
Click to collapse
You'll need a full wipe (sys, data, cache, dalvik cache) since you're going back to stock, backup your apps and data and flash the zip from recovery, enjoy!

FW android 5 D5833
What I do not know about is to make the pre-rooted FW, tried and failed. Wanted to put directly the FW Android 5 without going through the final .77, but do not know if this is that there (http://forum.xda-developers.com/z3-compact/general/how-to-root-backup-drm-keys-t3013343) is the D5833:
26 - Read the information and follow the instructions Given by the tool.
- Install latest firwmare with root, DRM keys, recovery -
Or, for Lollipop - fw 23.1.A.0.690 (Android 5.0 March 2015) at https://mega.co.nz/#!Y8tTQZgQ!yV5L2u...klmMdSl3EZ6t18 then skip directly to step 33.

Flash this ROM over CM12
i360* said:
You'll need a full wipe (sys, data, cache, dalvik cache) since you're going back to stock, backup your apps and data and flash the zip from recovery, enjoy!
Click to expand...
Click to collapse
Well, if I understood your post correctly, the rigtht process to change from CM12 to your Firmware as followed:
1. Download the zip to sdcard0 or sdcard1 (external SD Card)
2. Start in recovery mode ( Cyanogen recovery possible only on CM12)
3. Full wipe (wipe data/factory reset)
4. install downloaded zip (apply update)
Is it right? I´m not shure what you are mean with "since you're going back to stock..."
Thanks!

xposed working?
Thanks for this. I really wanted to try lollipop already. Xposed working on this also?

Santos8913 said:
What I do not know about is to make the pre-rooted FW, tried and failed. Wanted to put directly the FW Android 5 without going through the final .77, but do not know if this is that there (http://forum.xda-developers.com/z3-compact/general/how-to-root-backup-drm-keys-t3013343) is the D5833:
26 - Read the information and follow the instructions Given by the tool.
- Install latest firwmare with root, DRM keys, recovery -
Or, for Lollipop - fw 23.1.A.0.690 (Android 5.0 March 2015) at https://mega.co.nz/#!Y8tTQZgQ!yV5L2u...klmMdSl3EZ6t18 then skip directly to step 33.
Click to expand...
Click to collapse
That link is D5803 fw and not D5833.
Did you try using PRFCreator to create a pre-rooted flashable fw?
http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
dhvenus said:
Well, if I understood your post correctly, the rigtht process to change from CM12 to your Firmware as followed:
1. Download the zip to sdcard0 or sdcard1 (external SD Card)
2. Start in recovery mode ( Cyanogen recovery possible only on CM12)
3. Full wipe (wipe data/factory reset)
4. install downloaded zip (apply update)
Is it right? I´m not shure what you are mean with "since you're going back to stock..."
Thanks!
Click to expand...
Click to collapse
Yep, exactly those steps but before you flash the zip, format system as well.
erico458i said:
Thanks for this. I really wanted to try lollipop already. Xposed working on this also?
Click to expand...
Click to collapse
You can install xposed on an unlocked bootloader.
http://forum.xda-developers.com/showthread.php?t=3034811
Note: to avoid bootloops, wipe cache and dalvik after flashing xposed.

Pre-rooted flashable fw D5833
i360* said:
That link is D5803 fw and not D5833.
Did you try using PRFCreator to create a pre-rooted flashable fw?
Yes, but in the process is giving error. Please give to you and to post this pre-rooted flashable fw the D5833 in MEGA? Can be 4 or 5 Android.:good:
Click to expand...
Click to collapse

Unlocked bootloader
Hi, what's better way do you recommend to unlock bootloader?
thanks

i360* said:
Yep, exactly those steps but before you flash the zip, format system as well.
Click to expand...
Click to collapse
Damn... I prepared even to flash my phone, and just realized, my phone is the model 5803, not 5833...
I assume, this ROM will not work, right?
If it really don´t works, could you make a ROM for 5803?
Thanks!

Santos8913 said:
i360* said:
That link is D5803 fw and not D5833.
Did you try using PRFCreator to create a pre-rooted flashable fw?
Click to expand...
Click to collapse
Yes, but in the process is giving error. Please give to you and to post this pre-rooted flashable fw the D5833 in MEGA? Can be 4 or 5 Android.:good:
Click to expand...
Click to collapse
tomboderider said:
Hi, what's better way do you recommend to unlock bootloader?
thanks
Click to expand...
Click to collapse
I am currently working on FW for D5833 with locked bootloaders
dhvenus said:
Damn... I prepared even to flash my phone, and just realized, my phone is the model 5803, not 5833...
I assume, this ROM will not work, right?
If it really don´t works, could you make a ROM for 5803?
Thanks!
Click to expand...
Click to collapse
This ROM will work on D5803 without any problems since it's D5803 FW :laugh:

Sadly it did not work to flash the ROM. After I did the factory Reset, flashed the zip file and at approximately 30% switched back to the recovery menu. I repeated several times, but it did not finished the flash process.. Any Idea, what I could do?
Thanks!

dhvenus said:
Sadly it did not work to flash the ROM. After I did the factory Reset, flashed the zip file and at approximately 30% switched back to the recovery menu. I repeated several times, but it did not finished the flash process.. Any Idea, what I could do?
Thanks!
Click to expand...
Click to collapse
Sounds like your recovery. Are you on the latest ver?

Related

[GUIDE][Kernel]ROOT 14.3.A.0.757

This kernel is directly compiled from Sony kernel source !
It works for all C68xx devices with 14.3.A.0.757 FW.
ONLY FOR UNLOCKED DEVICES!!!
Features:
Dual Recovery (CWM+TWRP)
Sony_RIC Disabled
Change Log:
Updated TWRP rec to 2.7.0
You can root your device easily by flashing supersu.zip in recovery
Kernel Download:https://mega.co.nz/#!Vh8xEZYR!HwGosIRT1wFVCwm80KjL6vbo0NSduVlhUObM0NdNrPg
SuperSU Download:https://mega.co.nz/#!t18y2SRb!WwXemirwFBTqpxeNYrJJLC1jwH7R13NQE-uU7yEBk2Y
Easy HOW-TO flash guide:
Code:
fastboot.exe flash boot 681.img
Thanks @Chainfire for his SuperSU.
Here is a video root guide from @hamdogg, Thank you!
If you prefer Phil Recovery, here is a fixed Phil version from @ChillyChan. Thank you!
http://forum.xda-developers.com/showpost.php?p=51814504&postcount=140
jackie099 said:
This kernel is directly compiled from Sony kernel source !
It works for all C68xx devices with 14.3.A.0.757 FW.
ONLY FOR UNLOCKED DEVICES!!!
Features:
Dual Recovery (CWM+TWRP)
Sony_RIC Disabled
Change Log:
Updated TWRP rec to 2.7.0
You can root your device easily by flashing supersu.zip in recovery
Kernel Download:https://mega.co.nz/#!Vh8xEZYR!HwGosIRT1wFVCwm80KjL6vbo0NSduVlhUObM0NdNrPg
SuperSU Download:https://mega.co.nz/#!t18y2SRb!WwXemirwFBTqpxeNYrJJLC1jwH7R13NQE-uU7yEBk2Y
Easy HOW-TO flash guide:
Code:
fastboot.exe flash boot 681.img
Thanks @Chainfire for his SuperSU.
Here is a video root guide from @hamdogg, Thank you!
If you prefer Phil Recovery, here is a fixed Phil version from @ChillyChan. Thank you!
http://forum.xda-developers.com/showpost.php?p=51814504&postcount=140
Click to expand...
Click to collapse
Any luck for Locked bootloader?
Speederoff said:
Any luck for Locked bootloader?
Click to expand...
Click to collapse
Not too sure you've really thought through your question...
Vahid_ath said:
please make for looked too:crying:
Click to expand...
Click to collapse
You're asking the same question every god damn day. It won't change anything, so please stop it.
Vahid_ath said:
where?
this post first my post today!
Click to expand...
Click to collapse
Yup, but you asked the same question yesterday i believe, and also think two days ago. You need an unlocked bootloader to flash kernels, and there are no ways around that.
Is This Kernel Support init.d?
Sent from my C6802 using Tapatalk
Cant find my ext. sd card in trwp backup - shows 0 mb memory - in cwm no problem to find ext. sd card and make backups (got 35k mb free ram)
Is necesary full wipw with that new firmware?
Speederoff said:
Any luck for Locked bootloader?
Click to expand...
Click to collapse
Vahid_ath said:
please make for looked too: crying:
Click to expand...
Click to collapse
for now it is impossible for LB, but I used this kernel as a bridge to get root and and then relock BL on my C6802.
yes you must unlock the BL first.
abuihsan said:
for now it is impossible for LB, but I used this kernel as a bridge to get root and and then relock BL on my C6802.
yes you must unlock the BL first.
Click to expand...
Click to collapse
Do you have full root with locked BL?
Locked BL for what i read you need stock kernel too....
I tried but i only have parcial root..
Can't mount system as rw...
Yep, was going to say that reflash of stock kernel ftf removes system write (eg partial root) ~ but as @blueether has "suggested" (either here or another thread) the @[NUT] recovery "may" remount and fix this without need of a modified kernel (I'm not completely sure).
Sent from my C6833 using Tapatalk
From here
I tried but nothing happen....
Unless i did something worng...
Gone try again...
Deleted
Posted on the Correct Place
Lc1975 said:
Do you have full root with locked BL?
Locked BL for what i read you need stock kernel too....
I tried but i only have parcial root..
Can't mount system as rw...
Click to expand...
Click to collapse
this is what I did:
- flash ftf, (EDIT: in my case I boot the phone to check if ftf flashed successfully, phone boot and and wizard setup running, turning the phone OFF, then unclocked the BL with flashtool
- 'fastboot boot 757.img' (not 'fastboot flash boot', jackies one, with vanilla cwm)
- enter CWM, have to immediately did
- flash supersu.zip
- flash this fix (system r/w mount fix
- flash nut dualrecovery (latest beta 119 will be better)
- restore TA with TWRP from kitkat .681 nandroid (restore only Trim Area)
- done.. reboot, still got full root
^^ good work, and nice link @Lc1975 confirming nut recovery does disable rickill
Sent from my C6833 using Tapatalk
abuihsan said:
this is what I did:
- flash ftf, then unclocked the BL
- 'fastboot boot 757.img' (not 'fastboot flash boot', jackies one, with vanilla cwm)
- enter CWM, have to immediately did
- flash supersu.zip
- flash this fix (system r/w mount fix
- flash nut dualrecovery (latest beta 119 will be better)
- restore TA with TWRP nandroid (restore only Trim Area), restoring TA with 'TA backup' tools should be worked too..
- done.. reboot, still got full root
Click to expand...
Click to collapse
Soft brick my phone doing this...
Done every steps like you told here...
but when i reboot only have red light blinking and vibrate... nothing more...
Maybe because i locked the BL with Backup TA...
had to flash again the ftf...
Lc1975 said:
Soft brick my phone doing this...
Done every steps like you told here...
but when i reboot only have red light blinking and vibrate... nothing more...
Maybe because i locked the BL with Backup TA...
had to flash again the ftf...
Click to expand...
Click to collapse
Sorry to hear that but I don't know whether it is relevant or not.. After flashing full clean ftf (step 1) I boot the phone to check flashtool did the job. It boot and bring to the setup wizard. I turn the phone off and then did second step (unlock with flashtool and then 'fastboot boot 757.img') and so on..
Lc1975 said:
Soft brick my phone doing this...
Done every steps like you told here...
but when i reboot only have red light blinking and vibrate... nothing more...
Maybe because i locked the BL with Backup TA...
had to flash again the ftf...
Click to expand...
Click to collapse
Yeah, that'll happen if you re-lock your bootloader on a custom kernel. It has happened to me a couple of times, and you can solve it by simply unlocking the bootloader again.
^^ to be safe, you can reflash stripped ftf from @[NUT] rom thread to return kernel to stock (instead of relying on a TA backup of what will usually be an old kernel if you're upgrading)
Sent from my C6833 using Tapatalk
Thanks for your answers..
i already unlock again the BL with this one it's the sixth time..
Damm!!!
Sony Software is really hard to break!
You Devs and who tries to change software from Sony... Must be a headache ..
If i could catch the guy who had the ideia of making this so hard....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[OLD] [RECOVERY][CWM][TWRP][PhilZ] LG G2 mini D620

This thread is outdated.
For latest TWRP go here
Thanks to @powermetza
Try it on your own risk
! It may brick your phone !
Make a backup of your original recovery !
Managed to build a booting CWM 6.0.5.0.
Managed to build a booting TWRP 2.7.1.0
Managed to build a booting Philz 6.55.0
Don't try it if your bootloader is locked!
It made a backup to external_sd (fat32) and the backup looks good.
Tested wipe/backup/restore/install of TWRP and PhilZ on my device and can confirm it is working.
Tested wipe/backup/restore/install of CWM tested by @eta82 and confirmed working. Thank you for testing.
At the moment i can recomend to use TWRP because we can use a backdoor of our device to enter recovery as long as factory reset works.
Warning: This will wipe your data!
You need a PC with ADB to enter TWRP without working system or kernel.
Follow this gude: Factory Resetting Using Hardware Keys
The fectory reset uses our custom recovery. TWRP activates ADB before wiping.
While TWRP wipes your data do: adb reboot recovery
This saved me from using the KDZ method while trying out CM11
Zaaap
This thread is outdated. Look for a later one
CWM 6.0.5.0 / TWRP 2.7.1.0 / PhilZ 6.55.0 unofficial for LG D620
This is a ZIPed recovery.img - It has to be unziped and the .img flashed directly via dd or use a flash app like flashify or Rashr.
Experimental: Use it on your own risk!
XDA:DevDB Information
custom recovery, Tool/Utility for the LG G2 Mini
Contributors
Zaaap72
Version Information
Status: Stable
Created 2014-08-04
Last Updated 2014-09-09
Reserved
Finally, something is going on with our phones!
I'm gonna try unlocking bootloader today, but tell me - how should I install this recovery? Pushing it via adb as recovery.img?
P.S. Would it work on D620r model also?
Cheers, appreciate Your work!
Sent from my LG-D620 using XDA Free mobile app
silent_hunter said:
Finally, something is going on with our phones!
I'm gonna try unlocking bootloader today, but tell me - how should I install this recovery? Pushing it via adb as recovery.img?
P.S. Would it work on D620r model also?
Cheers, appreciate Your work!
Sent from my LG-D620 using XDA Free mobile app
Click to expand...
Click to collapse
You are right, for got to mention it:
It is a ZIPed recovery.img - It has to be flashed directly via dd or use a flash app like flashify or Rashr.
Zaaap
Just flashed it and it's working!
I used Flashify app You mentioned, but I previously unpacked archive You provided and renamed image as "recovery.img".
Now all we need is - waiting for some custom rom!
Thanks a lot! I can also confirm that Yours recovery work great. Screen for confirm. Now we only wait for CM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
silent_hunter said:
Just flashed it and it's working!
I used Flashify app You mentioned, but I previously unpacked archive You provided and renamed image as "recovery.img".
Now all we need is - waiting for some custom rom!
Click to expand...
Click to collapse
for those who have the time heres a good tut on how to port CM11
http://wiki.cyanogenmod.org/w/Doc:_porting_intro
my phone is still on service so i cant do much myself at this point :/
i got it to work!
Thanks for this. I got it to work, too.
I'm not sure, if I will use CM on this device (on my G-Pad I use this). But I'm really happy to have a recovery for complete backups!
So, backup works? What about restoring, does it work?
Flashing zips?
Sent from my D620R [Stock 4.4.2]
Vagelis1608 said:
So, backup works? What about restoring, does it work?
Flashing zips?
Sent from my D620R [Stock 4.4.2]
Click to expand...
Click to collapse
Test it and you will know.
Zaaap
Vagelis1608 said:
So, backup works? What about restoring, does it work?
Flashing zips?
Sent from my D620R [Stock 4.4.2]
Click to expand...
Click to collapse
Backup works, wipe cache works, reboot cammands too. I don't have tested restore. For installing zip I don't need this, because I normally use Flashify.
---------- Post added at 06:33 AM ---------- Previous post was at 06:21 AM ----------
Woh, as I can see, we now have TWRP, too.
On my other devices I always use TWRP, so I 'm more familar with that. Has anybody tested this? At the moment I'm happy to have a working custom recovery, but in the future I think I 'll use TWRP.
Quote:
Originally Posted by Zaaap72
Thank you for the images.
As flashing of recovery is no longer about unlocking bootloader please post in the correct thread.
------
The two zip files are not for flashing in an recovery.
You have to unpack them.
Then you will get a ***.img.
This can be either flashed via dd or you can use an app like flashify or Rashr.
Zaaap
nope, no luck , i've got a secure booting error and a "DBI Aoos Watchdog Reset" window
Really good job
Garcia98 said:
Really good job
Click to expand...
Click to collapse
But they are with stock kernel.
I hope you can help me to build the kernel from source.
This is why i would appreciate if you could open a kernel thread
Zaaap
Zaaap72 said:
But they are with stock kernel.
I hope you can help me to build the kernel from source.
This is why i would appreciate if you could open a kernel thread
Zaaap
Click to expand...
Click to collapse
You should have received a private message
I need to make space to backup with twrp, i can atleast access it via terminal: su, sync, reboot recovery
Sent from my LG-D620 using XDA Free mobile app
Not sure about TWRP, but in CWM i had to use backup to external SD option to make it work. I have no idea why G2 Minis internal storage is called 'sdcard'
Sent from my LG-D620 using XDA Free mobile app
silent_hunter said:
Not sure about TWRP, but in CWM i had to use backup to external SD option to make it work. I have no idea why G2 Minis internal storage is called 'sdcard'
Sent from my LG-D620 using XDA Free mobile app
Click to expand...
Click to collapse
because it is called so.
you can find it as 'sdcard' or 'sdcard0' likewise
Oh, really?
I meant 'sdcard' was mainly used as microSD mounting point. Recovery saves there backups by default, so when our D2 Mini got internal storage mounted as 'sdcard' strange things may happen.
Backup works, wipe cache works, install zip works :victory:
restore not used
EDIT:
in CWM

[Q] Rooting Lollipop 5.0.2

Any procedures on how I can root this new version?
I just got the OTA notification and updated through Pc companion but I lost root jn the process.
I have a locked bootloader BTW.
Thanx n advance.
BragaisG said:
Any procedures on how I can root this new version?
I just got the OTA notification and updated through Pc companion but I lost root jn the process.
I have a locked bootloader BTW.
Thanx n advance.
Click to expand...
Click to collapse
This is wrong thread for Q&A, but I can enlight you its not possibe today with locked bootloader. Have a good day!
Root is possible with locked bootloader.
Did it a few minutes ago.
Flashed 4.4.4 via Flashtool
Rooted via Easytool
Dualrecovery via .bat with Point 3 in the menue
Then flashed a 5.0.2 Zip I made with PRFCreator including Root (SuperSu 2.4.6) and Dualrecovery
Everything is working fine!
You can more accurately describe these operations how to do it ??
spoxxx said:
You can more accurately describe these operations how to do it ??
Click to expand...
Click to collapse
1. Download the firmware for your device with "XperiFirm"
2. Make a ftf of the firmware you just downloaded with "Flashtool".
3. Download "dual recovery" and latest "SuperSU" package.
4. Make sure you have a custom recovery already on your phone.
5. Read how to use this tool and make a zip for your phone to flash with it
http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
6. Flash the zip through recovery. Wipe cache, data and dalvik before ideally. Done. You will be pre-rooted with SuperSU.
PS: Don't try to install Xposed yet, it causes bootloops after first reboot so I am back on Kitkat until that's sorted.
Here is the tutorial for PRFCreator:
http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
Then flash the zip from sdcard1 via Philz Recovery
1st boot takes a long time
When already on 5.0.2, then flash a Kitkat FTF via Flashtool
Then root the 4.4.X with Easyroot
After that you have to use Dualrecovery installer, there you choose point 3
ZU will restart, pushing Vol Up will start Philz Recovery
In Philz Recovery Wipe Data, Cache, Dalvik, Factory reset
Then install Zip
didnt work for me
Thi method didnt work for me. My mobile is C6802. It went into a loop
The steps I followed were like this:
Flash kitkat with flashtool
Root with philz dual recovery
go into philz recovery
flash the zip file made with the link given above.
for recovery i downloaded philz dual recovery flashable
Try to make your own Zip with PRFCreator with a FTF for the C6802
Excuse me, does it work with locked bootloader? I'm coming from rooted 4.4 with locked bootloader but after I've followed your steps now I am in a bootloop
zot71 said:
Excuse me, does it work with locked bootloader? I'm coming from rooted 4.4 with locked bootloader but after I've followed your steps now I am in a bootloop
Click to expand...
Click to collapse
Followed again all the steps but checking more options in PRFCreator.... Lollipopo 5.02 with root is actually running on my Z Ultra
Thanks for your instructions!!
Actually there's a way to root 5.0.2 on UB without recompiling the .ftf and reflashing 4.4.4 back and forth. Just did that yesterday after having a bootloop with that pre-rooted .ftf.
So here's the idea (assuming you have an unlocked bootloader):
You will need the 5.0.2 .ftf, flashtool, fastboot, boot.img file from doomkernel v.22, XZDualrecovery zip and latest SuperSU zip from koushik's webpage (the one with 7 or 8 folders in it).
1) Clean flash any Lollipop .ftf with Flashtool.
2) Use fastboot to flash the boot.img from DoomKernel, thus you get a working recovery.
3) Restart the phone straight into recovery without letting it boot.
4) Flash SuperSU and XZDualRecovery, do the wipes (cache+dalvik) and power off the phone.
5) With Flashtool flash only the kernel of the Lollipop rom.
6) Reboot and enjoy! Now you have a fresh stock Lollipop ROM with full root access and a working recovery.
I suppose you could lock the bootloader back after that if you need it, though I don't see any reason to do that.
P.S. I will try to update this post with all links later when I get to my PC, posting with my XZU now.
zot71 said:
Followed again all the steps but checking more options in PRFCreator.... Lollipopo 5.02 with root is actually running on my Z Ultra
Thanks for your instructions!!
Click to expand...
Click to collapse
What options did you tick?
how to get lollipop kernel file
leeleewye said:
how to get lollipop kernel file
Click to expand...
Click to collapse
If you're asking about my previous post, then you don't actually have to "get" it. You should load the very same .ftf into Flashtool and then uncheck every tick except "KERNEL". That's the way to flash only one part of the rom.
Xa6a said:
Actually there's a way to root 5.0.2 on UB without recompiling the .ftf and reflashing 4.4.4 back and forth. Just did that yesterday after having a bootloop with that pre-rooted .ftf.
So here's the idea (assuming you have an unlocked bootloader):
You will need the 5.0.2 .ftf, flashtool, fastboot, boot.img file from doomkernel v.22, XZDualrecovery zip and latest SuperSU zip from koushik's webpage (the one with 7 or 8 folders in it).
1) Clean flash any Lollipop .ftf with Flashtool.
2) Use fastboot to flash the boot.img from DoomKernel, thus you get a working recovery.
3) Restart the phone straight into recovery without letting it boot.
4) Flash SuperSU and XZDualRecovery, do the wipes (cache+dalvik) and power off the phone.
5) With Flashtool flash only the kernel of the Lollipop rom.
6) Reboot and enjoy! Now you have a fresh stock Lollipop ROM with full root access and a working recovery.
I suppose you could lock the bootloader back after that if you need it, though I don't see any reason to do that.
P.S. I will try to update this post with all links later when I get to my PC, posting with my XZU now.
Click to expand...
Click to collapse
Successful with this guide. Thanks man.
Looking forward with the guide with links.
Thanx!
Sent from my C6833 using XDA Free mobile app
seking said:
What options did you tick?
Click to expand...
Click to collapse
I don't know if it is correct but I checked all the options in the upper right and everything worked.
Actually I am using my rooted lollipop without wiping everything except cache and dalvikcache and its running perfectly.
Thanks for the guide!!!
Xa6a said:
Actually there's a way to root 5.0.2 on UB without recompiling the .ftf and reflashing 4.4.4 back and forth. Just did that yesterday after having a bootloop with that pre-rooted .ftf.
So here's the idea (assuming you have an unlocked bootloader):
You will need the 5.0.2 .ftf, flashtool, fastboot, boot.img file from doomkernel v.22, XZDualrecovery zip and latest SuperSU zip from koushik's webpage (the one with 7 or 8 folders in it).
2) Use fastboot to flash the boot.img from DoomKernel, thus you get a working recovery.
.
Click to expand...
Click to collapse
Please give me file boot.img with many thanks.
I remember that, the boot.img file from doomkernel v.22 from kitkat 4.4.4, what is a trouble happend ?
Mucho79 said:
Here is the tutorial for PRFCreator:
http://forum.xda-developers.com/crossdevice-dev/sony/tool-prfcreator-easily-create-pre-t2859904
Then flash the zip from sdcard1 via Philz Recovery
1st boot takes a long time
When already on 5.0.2, then flash a Kitkat FTF via Flashtool
Then root the 4.4.X with Easyroot
After that you have to use Dualrecovery installer, there you choose point 3
ZU will restart, pushing Vol Up will start Philz Recovery
In Philz Recovery Wipe Data, Cache, Dalvik, Factory reset
Then install Zip
Click to expand...
Click to collapse
Is this process ok ? please show me before I flashing to my phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
on C6833 I create flashable Zip stock 5.0.2 with SuperSU and dualrecovery. you must flash android 4.4.4 and root + dualrecovery then build pre rooted zip rom and flash it from Philz recovery
---------- Post added at 12:08 PM ---------- Previous post was at 12:07 PM ----------
reednoel4u said:
Is this process ok ? please show me before I flashing to my phone.
Click to expand...
Click to collapse
You must check all option's

[STOCK][Marshmallow] D855 30B KDZ + Flashable Zips (system+boot+modem+root)[UPDATED!]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread is for the D855 variants. Files are from software version 30B (Android 6.0 Marshmallow).
Included below: TWRP-flashable stock rom, boot and modem zips. KDZ and individual images are also included.​
*There is NO anti-rollback qfuse used in this update so downgrading is still possible. See below for more downgrade info.
Please do not mirror files!
Requirements:
You must have TWRP 2.8.7+ installed to use these files. Thanks to Dees_Troy as always for that.
Best to already be rooted and have TWRP installed while on Android 4.x - 5.x then flash the zips in this thread to update to a rooted stock Marshmallow. It has been reported that 30B can be temp-rooted with Kingroot 4.6.5. So you COULD flash the 30B KDZ, temp-root with Kingroot and then read my long/annoying post here to perm root http://forum.xda-developers.com/showpost.php?p=64626209&postcount=529 . *update on root* With the info I provided in the previous sentence.. AutoRec for D855 has been updated for Marshmallow 30B.
Install Directions:
These directions should be used by everyone who wants a rooted 30B system. Don't want root? Then it's probably easiest to just flash the stock KDZ.
Before beginning it is suggested to backup your EFS in TWRP then save it to an external SD card or the cloud or your PC etc etc...
1. D/L 30B boot(V2), modem (Hybrid) and system zips along with SuperSu 2.52 and place on internal storage.
(Thanks to Chainfire for SuperSu and thanks to msubhani for confirming 2.52 works)
2. (Re)boot into TWRP. Backup current partitions: boot, system, data, efs. Press home button.
3. If coming from 100% stock Lollipop then a factory reset is optional.
COMING FROM ANY OTHER ROM needs a factory reset [Wipe button > swipe slider]
4. Install modem, boot, system and SuperSu zips (in that order!)
[Install button > select modem > Add zip > select boot > Add zip > system > Add zip > SuperSu > swipe to confirm]
All done.. time to reboot back into Android. (if TWRP asks if you want to install SU, no!)
Any issues with apps crashing etc after boot up may require a factory reset in TWRP for a fresh install of M.
Any issues with no root after flashing all 4 zips... boot back into TWRP and just reflash SuperSu zip.
Downloads:
LG-D85530B-Flashable.System.zip
100% stock untouched system. Also comes with cust partition. MD5 = e10f135e92d5246370ea6f5b8d36c6e5
Mirror here.
LG-D85530B-Flashable.Modem.RPM.TZ-AutoHybrid.zip
This is a hybrid 30B modem, rpm and tz zip with parts from 21A and 30B. 100% 30B modem does not yet work with Bump-compatible bootloaders so the option is to use this hybrid modem or use a Lollipop modem. Original 30B modem is still available in the Codefire Directory link further below if needed. Also HERE is the 21A modem/rpm/tz combo just in case you don't want to use the hybrid.
LG-D85530B-Flashable.Boot-AutoV2.zip
This is a flashable stock 30B boot.img. Boot.img contains kernel + dtb + ramdisk. I repacked this to make some things work then Bump'd it. Thanks to Codefire for BUMP.
CODEFIRE DIRECTORY
KDZ, stock images, flashable zips and all other 30B-related files available here.
30B KDZ Mirror
Downgrade/Revert:
1. Use LGUP HERE to flash a previous KDZ version. The LGUP thread assumes you have a G4... so instead of downloading the "8992 DLL use the DLL installer LGUP_8974_DLL_Ver_0_5_CODEFIRE.MSI HERE instead.
2. Restore your TWRP backups. Depending on your TWRP build it may or may not backup modem. If it does not and you flashed the 30B modem you will have to find a Lollipop modem zip elsewhere. All versions of TWRP should backup Boot, system and data.. so only other variable is modem/rpm/tz.
3. Use LG Flash + TOT + NEW DLL HERE to downgrade. I think LGUP is the better option tho... LGUP can flash both KDZ and TOT and doesn't care which COM port it's using.
Click to expand...
Click to collapse
y u quote OP?
Follow me on twitter for future updates on LG-related things - twitter.com/@utoprime
Find this thread helpful? Enjoy getting M ASAP? Enjoy the ability to keep root? Hit the Thanks button!
Feeling extra generous? Hit the Donate button under my name in post #2 or click my name at the top of this post.
Seems XDA removed the visible Donate button in OP. Thanks XDA...
#TEAMCODEFIRE
CM devs have already got their hands on this to grab the blobs for CM13! http://review.cyanogenmod.org/#/q/topic:g3_M_blobs
Currently the new 30B modem doesn't mesh with the downgraded bootstack which is needed for BUMP. Current fix is to keep the hybrid modem I linked in the above post or using the 21A or 21C modems... I've also linked 21A modem/tz/rpm above so you won't have to hunt for everything. Everything required should be in this thread somewhere.
I plan on poking the modem stuff more once I can get an M build for my G3 version.
First of all thanks a lot for the zips
Just one question, in the instructions its says 'Flash FULL 30B ZIP', does that mean all the zips or just the System? I have this doubt because the bootloader is new so we cant use bump on the new bootloader right?
autoprime said:
These are for the D855 variant only. Files are from software version 30B (Android 6.0 Marshmallow).
Included below: TWRP-flashable stock rom, boot, modem and bootloader zips. KDZ and individual images are also included.​
*There is NO anti-rollback qfuse used in this update... you can downgrade using LGUP HERE.
Please do not mirror files!
​y u quote OP?
Click to expand...
Click to collapse
Hi, does it matter which order we flash these zips?
Thanks!! Its so great
deleted
i got a good security error
So if i want a fresh install: (after backup)
i flash:
LG-D85530B-Flashable.System.zip
LG-D85530B-Flashable.Modem.RPM.TZ.zip
LG-D85530B-Flashable.Boot.zip
then reboot recovery ( i get a error that no OS is installed? ?? )
Then flash SU
and if needed the sharpening fix
Darkje said:
i got a good security error
So if i want a fresh install: (after backup)
i flash:
LG-D85530B-Flashable.System.zip
LG-D85530B-Flashable.Modem.RPM.TZ.zip
LG-D85530B-Flashable.Boot.zip
then reboot recovery ( i get a error that no OS is installed? ?? )
Then flash SU
and if needed the sharpening fix
Click to expand...
Click to collapse
i did not reboot into recovery after flashing the rom images (system, modem and boot) but just pressed home in twrp and then i continued flashing as per instructions and seems to be booting at the moment.
donjamal said:
i did not reboot into recovery after flashing the rom images (system, modem and boot) but just pressed home in twrp and then i continued flashing as per instructions and seems to be booting at the moment.
Click to expand...
Click to collapse
Did you do a full wipe before flashing?
Darkje said:
Did you do a full wipe before flashing?
Click to expand...
Click to collapse
nope and android is now upgrading
Yeeeeees
Inviato dal mio LG-D855 utilizzando Tapatalk
i only get security errors....
boot certification faild.
could it be because i flash it over fulmics
no sim card message, no root.
i loaded up the recovery, appriciate the devs work. But no go on this side of the word
So, clean install would kill root, right?
Can I do a full wipe on fulmics and install the 3 zips along with sharpening fix and supersu?
Sent from my LG-D855 using Tapatalk
MidnightDevil said:
So, clean install would kill root, right?
Click to expand...
Click to collapse
i cannot confirm, eitherway iam geting security errors.
MidnightDevil said:
So, clean install would kill root, right?
Click to expand...
Click to collapse
i did not wipe, i followed the instructions and i don't have sim (mobile network) and root neither.
shivaagarwal1 said:
Can I do a full wipe on fulmics and install the 3 zips along with sharpening fix and supersu?
Sent from my LG-D855 using Tapatalk
Click to expand...
Click to collapse
that is the same base as me, i didnt get anything. if you make a backup you can try.
Here is the video of first looking https://youtu.be/ipLwcRoZCME . Tks for watching

[ROM] T-Mobile LG G Pad X V521 20H Stock ROM 4/23/2017

Heres the latest update from LG.
Must be at least 20f/g with TWRP to flash this.
To get TWRP go here: (Kdz to 20f if on 20g)
https://forum.xda-developers.com/showthread.php?t=3533338
Do NOT wipe system or you might get stuck in twrp bootloop.
Includes new 20H modem.
**********************
FLASHING INSTRUCTIONS
**********************
1. WARNING, MUST BE IN 20F/G. IF ON LINEAGE, DO NOT FLASH. YOU MUST KDZ TO 20F OR RESTORE 20F BACKUP FIRST.
2. DO NOT FORMAT SYSTEM.
2. TWRP BACKUP FIRST
3. Flash from TWRP.
DOWNLOAD
LG-V521-20H-Stock-Rooted.zip
https://www.androidfilehost.com/?fid=745425885120726661
Sent from my LG-V521 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Does it include the modem?
I'm going to try from lineage.
Edit -flashed from lineage worked fine. It rebooted straight from twrp so i wasn't sure if the flash comppeted. After waiting at bootscreen i still wasn't sure so i did the volume down, power button combo and it booted into system fine.
Edit 2 - no root and loss twrp
Airtioteclint said:
Does it include the modem?
I'm going to try from lineage.
Edit -flashed from lineage worked fine. It rebooted straight from twrp so i wasn't sure if the flash comppeted. After waiting at bootscreen i still wasn't sure so i did the volume down, power button combo and it booted into system fine.
Edit 2 - no root and loss twrp
Click to expand...
Click to collapse
Lineage always messes up going back to stock roms. I've had this problem to on 20g to after being on lineage. You'll have to kdz to 20f and get twrp. I had put this on the flashing instructions you must be on 20f/g. .
It does include modem.
Sent from my SM-G955U using Tapatalk
MicroMod777 said:
Lineage always messes up going back to stock roms. I've had this problem to on 20g to after being on lineage. You'll have to kdz to 20f and get twrp. I had put this on the flashing instructions you must be on 20f/g. .
It does include modem.
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
Yeah kdz 20f and was able to get root back. Reinstalled your 20h and everything's working flawlessly. I was having problems with my touchscreen being a little laggy and I think your rom fixed it. :good:
Any way to install this update from SD card on stock recovery? I get error Everytime the regular way. Thanks
Hawksronny said:
Any way to install this update from SD card on stock recovery? I get error Everytime the regular way. Thanks
Click to expand...
Click to collapse
Impossible.
Sent from my SM-G955U using Tapatalk
MicroMod777 said:
Impossible.
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
So even though there is an option to update from SD in stock recovery, it's impossible? Just want to confirm. Just doesn't make sense to me
Hawksronny said:
So even though there is an option to update from SD in stock recovery, it's impossible? Just want to confirm. Just doesn't make sense to me
Click to expand...
Click to collapse
Then try it! lol
Sent from my SM-G955U using Tapatalk
MicroMod777 said:
Then try it! lol
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
I'm no developer. I just want to update without rooting or custom recovery. I try it 2 ways, and fails the normal way, and the stock recovery doesn't recognize the update.zip the 2nd way. I probably have it named wrong. Either way, I doubt it's impossible. Any help would be appreciated. Thanks
Hawksronny said:
I'm no developer. I just want to update without rooting or custom recovery. I try it 2 ways, and fails the normal way, and the stock recovery doesn't recognize the update.zip the 2nd way. I probably have it named wrong. Either way, I doubt it's impossible. Any help would be appreciated. Thanks
Click to expand...
Click to collapse
Its very, very impossible to flash this rom except per twrp.
LG uses security keys to flash anything from stock recovery.
Sent from my SM-G955U using Tapatalk
I don't want to flash a rom. I asked how to flash the stock update from the stock recovery because the update errors out when I try to do it the normal ota way. There is an option to update from SD in the stock recovery. It's just that it doesn't recognize the stock update.zip in the stock recovery because I probably don't have it named right. Was just wondering if anyone knew what to name it, where to download the update.zip, how to update with it etc. Didn't mean to offend anybody ?
Hawksronny said:
I don't want to flash a rom. I asked how to flash the stock update from the stock recovery because the update errors out when I try to do it the normal ota way. There is an option to update from SD in the stock recovery. It's just that it doesn't recognize the stock update.zip in the stock recovery because I probably don't have it named right. Was just wondering if anyone knew what to name it, where to download the update.zip, how to update with it etc. Didn't mean to offend anybody ?
Click to expand...
Click to collapse
No offence taken. All good. You just can't do that. [emoji4]
Sent from my SM-G955U using Tapatalk
Should i be able to downgrade from 20h to 20 f to root. I just got a new one on a warranty exchange and get an error in lgup at 4%. Sorry if this is off topic
same question, some body can check antirollback, this tab can downgrade from v521 v20h to v20f or mashmallow or not
Thanks
[ROM] T-Mobile LG G Pad X V521 20i Stock ROM Rooted TWRP\FF Backups Release 7/1/2017
A TWRP backup of a stock rooted v52120i:
Code:
https://drive.google.com/file/d/0B6L7kMY8TK7uZ2lPMUhtVmRINUk/view?usp=sharing
FlashFire Restore from backup:
Code:
https://drive.google.com/file/d/0B6L7kMY8TK7uQlFfY3lJTVl1X1k/view?usp=sharing
To install, move files to designated place (twrp/backups/{phoneid}/) or (FlashFire/backups).
at least 20f and root required.
saw nobody put it up so i decided i would.
Mine still has rooted 10c. How to update to this latest ROM and rooted ? TIA
Does 7.0 improve idling/sleeping battery ?
Yes that is probably one of its biggest changes vs MM.
Follow this guide to a T: https://forum.xda-developers.com/lg-g-pad-83/development/nougat-7-0-v521-guide-to-update-v521-lg-t3533338
then boot into recovery, copy my TWRP backup to internal/microsd/usb, in TWRP restore the system and boot partitions that are automatically checked.
Download the latest systemless or system mode supersu.zip and copy it to the main install folder C:\Program Files x86\Minimal ADB and Fastboot\.
Then in twrp click ADB sideload > do not check anything to erase > open minimal adb/fastboot and type adb sideload whateveryounamedyoursupersuzipfile.zip and you should be good to go.
Shockey0710 said:
Yes that is probably one of its biggest changes vs MM.
Follow this guide to a T: https://forum.xda-developers.com/lg-g-pad-83/development/nougat-7-0-v521-guide-to-update-v521-lg-t3533338
then boot into recovery, copy my TWRP backup to internal/microsd/usb, in TWRP restore the system and boot partitions that are automatically checked.
Download the latest systemless or system mode supersu.zip and copy it to the main install folder C:\Program Files x86\Minimal ADB and Fastboot\.
Then in twrp click ADB sideload > do not check anything to erase > open minimal adb/fastboot and type adb sideload whateveryounamedyoursupersuzipfile.zip and you should be good to go.
Click to expand...
Click to collapse
how did u get 20i ? and got it into permissive mode to obtain root ? know anything about 20h/i changelog ?
abced123 said:
how did u get 20i ? and got it into permissive mode to obtain root ? know anything about 20h/i changelog ?
Click to expand...
Click to collapse
i havent found a changelog nor have i looked though but new kernel version and various security fixes tho, and yes its getenforce permissive. from tmobile fota.
Can I use this in LG-V500???

Categories

Resources