Led and Layers don't work, Clean AOSP 5.0.2 - Redmi Note 2 Q&A, Help & Troubleshooting

Hi, i'm on this rom http://forum.xda-developers.com/redmi-note-2/orig-development/aosp-5-0-2-hermes-18-10-2015-t3228140 , HDR might be the only bug but my led doesn't work when i got notifications, even with light flow
When i try to apply layers thème, after a reboot nothing change ..
Can you help me to fix this or i have to flash an other rom ?
Thanks

xjerem34x said:
Hi, i'm on this rom http://forum.xda-developers.com/redmi-note-2/orig-development/aosp-5-0-2-hermes-18-10-2015-t3228140 , HDR might be the only bug but my led doesn't work when i got notifications, even with light flow
When i try to apply layers thème, after a reboot nothing change ..
Can you help me to fix this or i have to flash an other rom ?
Thanks
Click to expand...
Click to collapse
for notifications I use: LightFlow
Try to clear cache & dalvik in recovery I saw on some posts that it helps

Related

MIUI 2.4.20 Notification LED problem

In the past i have had issues getting this to work, i am sure i am not alone.
Right now, i have freshly installed MIUI 2.4.20 with the latest Pheonix kernel and_ modules, various fixes for the other issues with that rom.
One problem that always arises, getting the notification leds to work.
So i flash, and then choose custom so it crashes, then pull battery, go into streakmod and flash custom_light_fix.zip, which leaves the device stuck on boot screen, in the past, one option was to then flash MIUIFixen.zip, however at this time, this works to a point, however led lights are basically on all the time, anybody have any suggestions?
Anybody?
(InsertNameHere) said:
Anybody?
Click to expand...
Click to collapse
Which baseband are you using? Did you try BB 406? 406 worked for me.
(InsertNameHere) said:
In the past i have had issues getting this to work, i am sure i am not alone.
Right now, i have freshly installed MIUI 2.4.20 with the latest Pheonix kernel and_ modules, various fixes for the other issues with that rom.
One problem that always arises, getting the notification leds to work.
So i flash, and then choose custom so it crashes, then pull battery, go into streakmod and flash custom_light_fix.zip, which leaves the device stuck on boot screen, in the past, one option was to then flash MIUIFixen.zip, however at this time, this works to a point, however led lights are basically on all the time, anybody have any suggestions?
Click to expand...
Click to collapse
If u use MIUI 2.4.20 from nitin1987 try installing blinking led from tatank_t version manics on this thread
http://http://forum.xda-developers.com/showthread.php?t=1546302
that's work for me and try to turn off "Pulse notification LED" in Setting-Personal-Trackball menu
abdulm said:
Which baseband are you using? Did you try BB 406? 406 worked for me.
Click to expand...
Click to collapse
faroukrajasa said:
If u use MIUI 2.4.20 from nitin1987 try installing blinking led from tatank_t version manics on this thread
http://http://forum.xda-developers.com/showthread.php?t=1546302
that's work for me and try to turn off "Pulse notification LED" in Setting-Personal-Trackball menu
Click to expand...
Click to collapse
Thanks guys, i am using latest baseband, cannot change as PDMI port is broken.
faroukrajasa said:
If u use MIUI 2.4.20 from nitin1987 try installing blinking led from tatank_t version manics on this thread
http://http://forum.xda-developers.com/showthread.php?t=1546302
that's work for me and try to turn off "Pulse notification LED" in Setting-Personal-Trackball menu
Click to expand...
Click to collapse
Your link is broken.
(InsertNameHere) said:
Your link is broken.
Click to expand...
Click to collapse
The colon after "http" in the link is missing. Insert it in and I can open the page.

[Q] Problem with battery state after charger is plugged in

Hello!
Like you see I don't have permissions to write on developer forum so I am asking here for my problem.
I have installed rom from here: http://forum.xda-developers.com/showthread.php?t=2265805
Everything is perfect on my Neo V, except one thing:
When I plug in charger or USB-PC cable, sound of connecting is audible but no state of charging is visible. When I enter into BATTERY menu in Settings, I can see increasing percents of battery level, but status of battery is "discharging". No icon of charging, no information on lock screen - nothing. It is frustrating My phone is rooted, CWM 6, kernel from package above. Can I do something to solve this problem?
Thank you for help everyone!
Michał
johny_noc said:
Hello!
Like you see I don't have permissions to write on developer forum so I am asking here for my problem.
I have installed rom from here: http://forum.xda-developers.com/showthread.php?t=2265805
Everything is perfect on my Neo V, except one thing:
When I plug in charger or USB-PC cable, sound of connecting is audible but no state of charging is visible. When I enter into BATTERY menu in Settings, I can see increasing percents of battery level, but status of battery is "discharging". No icon of charging, no information on lock screen - nothing. It is frustrating My phone is rooted, CWM 6, kernel from package above. Can I do something to solve this problem?
Thank you for help everyone!
Michał
Click to expand...
Click to collapse
PS. I see forest of hands to help me
I do not use this rom, but I try to help you with some this advice message.
You should try to reflash the stock firmware (the whole firmware, including kernel) and verify if the charging icon appear, then if you like the custom rom, try to flash it again, but be careful with each installation steps.
Try also to clear the battery status from CWM before flashing custom rom.
ciubexx said:
I do not use this rom, but I try to help you with some this advice message.
You should try to reflash the stock firmware (the whole firmware, including kernel) and verify if the charging icon appear, then if you like the custom rom, try to flash it again, but be careful with each installation steps.
Try also to clear the battery status from CWM before flashing custom rom.
Click to expand...
Click to collapse
Hello!
Thank you for answering my question!
Before installing this ROM everything works fine. Now battery shows how many energy left in percent, but when connecting phone to charger it doesn't show "charging" state. I will try to reset battery status before installing this ROM but I do not know if there is such option in CWM 6.
The second problem I saw yesterday is Gallery app crash, when trying to view picture from Camera app. It shows message "unfortunately, app Gallery was stopped". I was trying to clear cache, data, Dalvik cache - no results.
I will try to do what you've said and report back if it helps.
Best regards,
Michał
Hello again!
I've done what you asking for unfortunately with no success... All work fine without charging status and Gallery app (camera app, gallery app, recorder app). Any other ideas?
Thank you,
Michał
The charging issue is present on stock room too?
Or only on this customized rom?
I'll suggest to use for a couples of days stock room to see if the phone is stable: charging ok and the applications do not crash.
Then, if all is ok with the stock room installed, try another customized room or this custom room, but with another custom kernel.
I have my phone (Neo = MT15i) from november 2012, and on the first 4 ... 5 months I used at least one customized room, but in the final I given up to all customized room, and I use a stock room with only few application from a customized room. (InfiniteView, System UI and Calculator).
On stock ROM everything is OK. Do you really think it could be kernel problem? If yes then I wait for update of this kernel.
I also removed batterystats.bin using special app with no effects with charging state. Is there any possibility to change built Gallery app which includes Camera app and sound recorder app?
Besides of described problems I don't see anything else. I though the battery problem can be solved changing something in scripts...
What is strange, that when I connect a cable I hear special sound which signalize charger is plugged in.
Could you propose me a stable kernel compatible with android 4.2.2 (CyanogenMod 10.1)?
Thank you VERY MUCH for response and help!
Michał
Anyone??
Can anyone help me, please?
Stock firmware is slow (full of SONY app which are useless), but this (4.2.2) is much faster, but has bugs...
Sorry for this delayed message, as I mentioned above I did not use / used this firmware.
I suggest you to try different ROM based on ICS or JB, look at this post list: [REF][ALL Roms,Kernels ,firmwares for NEO/V/L ][14.07.2013][ACTIVELY UPDATED]
ciubexx said:
Sorry for this delayed message, as I mentioned above I did not use / used this firmware.
I suggest you to try different ROM based on ICS or JB, look at this post list: [REF][ALL Roms,Kernels ,firmwares for NEO/V/L ][14.07.2013][ACTIVELY UPDATED]
Click to expand...
Click to collapse
Hello!
I used another 4.2.2 ROM and the same issue appears... I repeat: on Stock ROM everything is OK...
Best regards,
Michał
johny_noc said:
Hello!
I used another 4.2.2 ROM and the same issue appears... I repeat: on Stock ROM everything is OK...
Best regards,
Michał
Click to expand...
Click to collapse
That's strange. I've using CM10 (JB 4.1.2) and CM10.1 (JB 4.2.2) since long time and never had this issue. Try re-flashing the kernel or try another cable
Regards
I've done reflashing... Trying to use other kernel, trying to do "fresh flash" (install stock ROM from .tft file then all procedure with rooting and CWM install). No results. Now I have kernel nAa+ 3.4.51 (maybe it is bugged)...
now I am on this ROM: http://forum.xda-developers.com/showthread.php?t=2358730
Michał
johny_noc said:
I've done reflashing... Trying to use other kernel, trying to do "fresh flash" (install stock ROM from .tft file then all procedure with rooting and CWM install). No results. Now I have kernel nAa+ 3.4.51 (maybe it is bugged)...
now I am on this ROM: http://forum.xda-developers.com/showthread.php?t=2358730
Michał
Click to expand...
Click to collapse
Hi,
nAa 3.4.51 works fine, I've been using it with DarkRom since it was released and never had your problem. You can try to flash latest nAa kernel 3.4.53 from DD thread (he released it on Saturday). It works fine and includes the latest changes
@milanjm - Thank you for your reply!
I have some questions:
1. Do I need to wipe something or reflashing ROM after this kernel installation?
2. What are "modules" in this thread? Do I need to install them too?
johny_noc said:
Do I need to wipe something or reflashing ROM after this kernel installation?
Click to expand...
Click to collapse
yes only format system,
on jb (cm10) do wipe battery stats in CWM >advanced>wipe battery stats
tiestobunio said:
yes only format system,
on jb (cm10) do wipe battery stats in CWM >advanced>wipe battery stats
Click to expand...
Click to collapse
Could you please answer all questions? Thank you.
johny_noc said:
@milanjm - Thank you for your reply!
I have some questions:
1. Do I need to wipe something or reflashing ROM after this kernel installation?
2. What are "modules" in this thread? Do I need to install them too?
Click to expand...
Click to collapse
1.. Flash another kernel like alfs 09c then in CWM do format system and full wipe then instal this rom .
2.Modules are the same as all roms , on cm9,cm10 is another but you have cm6/7 .
johny_noc said:
@milanjm - Thank you for your reply!
I have some questions:
1. Do I need to wipe something or reflashing ROM after this kernel installation?
2. What are "modules" in this thread? Do I need to install them too?
Click to expand...
Click to collapse
Here you have a detailed process:
1. Flash the kernel (fastboot)
2. Enter in recovery and format /system (only that) in mount option
3. Flash ROM
4. Flash modules (they are for WiFi)
5. Wipe dalvik (in advanced option)
6. Reboot
Let's hope this will solve your problem
@milanjm - Thank you for detailed instructions!
I will try to flash this new kernel after work (now I am at work ) and will inform you if something changes.
@tiestobunio - Thank you for pointing a good GB ROM.
I will flash it if every solution fails. I won't go back to 2.3.x GB now from known reasons.
johny_noc said:
@milanjm - Thank you for detailed instructions!
I will try to flash this new kernel after work (now I am at work ) and will inform you if something changes.
@tiestobunio - Thank you for pointing a good GB ROM.
I will flash it if every solution fails. I won't go back to 2.3.x GB now from known reasons.
Click to expand...
Click to collapse
Good luck

[Discussion Thread] CrDroid ROM

This is the ONLY thread you guys will talk about the CrDroid ROM.
DONT post questions or whatever at the other leaked AOSP ROM thread else it'll create much confusion
So far annoyances thats been reported are:
• Random reboots (at least for some people)
• Auto-brightness
• Underclocked CPU
• Not working HDR & Panaroma (solved with workaround)
DOWNLOAD LINK FOR CRDROID ROM
http://pan.baidu.com/s/1bnzqPBL
Reserved
Via the Internet
Regarding Random Reboots !
I have been using the ROM since yesterday though i have yet not observed a single reboot . I have tried following things as suggested in AOSP thread however it does not give me a reboot. Auto Brightness is the only lingering issue i faced !
Any pointers to reproduce the reboots ?
M3gAtR0N said:
I have been using the ROM since yesterday though i have yet not observed a single reboot . I have tried following things as suggested in AOSP thread however it does not give me a reboot. Auto Brightness is the only lingering issue i faced !
Any pointers to reproduce the reboots ?
Click to expand...
Click to collapse
LKspro said:
after u have the first reboot, cover the upper sensors and touch the screen while it is off. Then the screen should freeze and rebbot after a while
Click to expand...
Click to collapse
This is from @LKspro
Via the Internet
TiTAN-O-One said:
This is from @LKspro
Via the Internet
Click to expand...
Click to collapse
I have reproduced the same however it did not cause a reboot for me ! Thats why asked !! Is this the encountered random reboot occurrence ?? Or do we have something else too ?
Good rom lots of settings but useless... always reboot..
M3gAtR0N said:
I have reproduced the same however it did not cause a reboot for me ! Thats why asked !! Is this the encountered random reboot occurrence ?? Or do we have something else too ?
Click to expand...
Click to collapse
Yeah, first time it happens random, but if it once happens to you, then you will be able to reproduce it.
Anyone try to use the boot.img from leaked AOSP ROM and put I to this ROM? If yes do the random reboot still happening?
wai10691 said:
Anyone try to use the boot.img from leaked AOSP ROM and put I to this ROM? If yes do the random reboot still happening?
Click to expand...
Click to collapse
I can try this but not sure of the exact steps to follow... I like the CM rom very much.. blazing fast with ART, but random reboots quite often. I am now using wakelock to control the reboots. if you think changing the boot.img can help, i will try it out. lemme know what to do for tht
krispuniq said:
I can try this but not sure of the exact steps to follow... I like the CM rom very much.. blazing fast with ART, but random reboots quite often. I am now using wakelock to control the reboots. if you think changing the boot.img can help, i will try it out. lemme know what to do for tht
Click to expand...
Click to collapse
Before flashing the ROM zip simply replace the boot.img in the crdroid with the one from aosp.
I can try this later but I'm outside now
wai10691 said:
Before flashing the ROM zip simply replace the boot.img in the crdroid with the one from aosp.
I can try this later but I'm outside now
Click to expand...
Click to collapse
Done... Flashing went ok but after booting all my apps are gone (I didnt do a clean wipe while flashing.. only wiped dalvik)
The apps are gone anyway.. so i went back to recovery and did another clean flash.. Reboot the phone, but no mobile network. Unable to latch on to network even manually.. so may be there is something missing in the boot.img ?
Back key
Anyone can confirm back key in this rom didnt behave as it should after deleting pre-install files such as baidu services apps
edit 1 - looks like it has been warned by the dev as do not delete keyboard input method or else back button wont work..
Where is the link to the ROM. I'd update OP. Also, is there any bugs with the ROM? Or is it working like AOSP?
Via the Internet
Download link
http://pan.baidu.com/s/1bnzqPBL

Chrome Notifications Dark, impossibile to read

Only the Chrome notifications on my phone have black text and are too hard to read. I'm using Nova Launcher, but i've tried also with default launcher but nothing has changed.
I've tried different themes, but nothing to do..
There is some method or app to avoid this problem?
Try doing a factory reset, or try clearing the app's data, it might help.
DigiGoon said:
Try doing a factory reset, or try clearing the app's data, it might help.
Click to expand...
Click to collapse
Of course i've already done. Isn't a rom problem, because i've this problem from first rom (lollipop) now i'm on B370 and still have this problem.
Okay try this once, flash the whole firmware package by following these steps:
Download your phone's latest firmware.
After doing this put the UPDATE.APP in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
This might solve it.
walter4991 said:
Of course i've already done. Isn't a rom problem, because i've this problem from first rom (lollipop) now i'm on B370 and still have this problem.
Click to expand...
Click to collapse
This is a well known problem due to EMUI themes. I bet if you change the desktop background to one with more bright colors you will see the notifications.
Try to update to B371, backup, factory reset and play a little with the themes.
I think Colors or Vui themes solve this. Something that also could be solved in the EMUI theme engine or build.prop. I don't know for sure.

LED Notification Light Blinking Even Without Notifications

Hi everyone,
My first post here I just need help regarding this issue with my Vibe K5. After rooting it, the led notif light will suddenly light up yellow even without notification. I tried unrooting it using kingroot and uninstalling the app, clearing the cache but none of these seem to work. Thanks.
it is the kernel problem
chikiran006 said:
Hi everyone,
My first post here I just need help regarding this issue with my Vibe K5. After rooting it, the led notif light will suddenly light up yellow even without notification. I tried unrooting it using kingroot and uninstalling the app, clearing the cache but none of these seem to work. Thanks.
Click to expand...
Click to collapse
Reply:
Just install the stock kernel or if you didn't find that u could install stock rom again and again root with supersu after that disable mount namespace separation then it's solved
If nothing else is solved u could directly head back to custom rom like lineage os
ravi.kickass said:
Reply:
Just install the stock kernel or if you didn't find that u could install stock rom again and again root with supersu after that disable mount namespace separation then it's solved
If nothing else is solved u could directly head back to custom rom like lineage os
Click to expand...
Click to collapse
I did a unroot from kingroot by uninstalling the app...why should i root it again?

Categories

Resources