CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review.
Download Links
CyanogenMod:
Nightly: http://download.cyanogenmod.org/?device=vs985&type=nightly
Google apps addon:
OpenGapps: http://opengapps.org/ (you'll want a zip for the ARM platform, Android version 6.0)
HEADS UP: Be sure you flash the gapps package with your rom. If you boot your rom, then go back and try to flash gapps after the fact, you're gonna have a bad time.
Firmware:
Your must be on the 35b boot stack. Here's a flashable zip provided by xdabbeb: https://www.androidfilehost.com/?fid=24052804347843993
Misc Links
Unoffical changelog:
Link: http://www.cmxlog.com/13/vs985/
Learn to build yourself:
Link: https://wiki.cyanogenmod.org/w/Build_for_vs985
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
[ROM][OFFICIAL] CyanogenMod 13.0 Nightlies for the Verizon LG G3, ROM for the Verizon LG G3
Contributors
invisiblek
Source Code: http://github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Nightly
Created 2015-11-24
Last Updated 2015-11-24
So do we dirty flash over unofficial or clean flash with the nuke it.apk?
rippedwarrior69 said:
So do we dirty flash over unofficial or clean flash with the nuke it.apk?
Click to expand...
Click to collapse
I dirty flashed with no issues.
A quick note for those who want to get Facebook and Messenger working . Delete the following files in your file browser (note that you must enable root access for apps in Developer Options):
/data/app/com.facebook.katana-1/lib/arm/libsslx.so
/data/app/com.facebook.orca-1/lib/arm/libsslx.so
Note that you still won't be able to make phone or voice calls in FB/Messenger.
NedDasty said:
I dirty flashed with no issues.
A quick note for those who want to get Facebook and Messenger working . Delete the following files in your file browser (note that you must enable root access for apps in Developer Options):
/data/app/com.facebook.katana-1/lib/arm/
/data/app/com.facebook.orca-1/lib/arm/
Note that you still won't be able to make phone or voice calls in FB/Messenger.
Click to expand...
Click to collapse
Did you use nukeit.apk
rippedwarrior69 said:
Did you use nukeit.apk
Click to expand...
Click to collapse
Read this post. My guess is that you do not need it. CM13 was unofficial earlier, which meant the official branch had incompatibilities with VS985, which were fixed with the Nuke-it flash. The latest official adoption, and merge, have resolved these already, but Invisiblek would be able to clarify better than I.
Thanks for the Rom. Will report on any undocumented bugs.
Reformat ext sd card?
Does CM13 still require you to reformat any external SD card it recognizes? Sorry, haven't tried this new version, and will have to back up my card if this is still a requirement
TIA
:cyclops:
The ROM itself is running STUPID fast on my phone. Love the speed of everything.
I am having issues with this not maintaining the Connection to my Android Wear device. It seems to disconnect, and then forget the connection. Facebook and Snapchat will not start, even after deleting the folders in the previous posts.
Anyone here tested out Qi Charging yet?
Trouble connecting/authenticating to Enterprise WiFi after flashing. Credentials are being rejected and authentication is failing. Has anyone else experienced this?
This happens with a fresh or dirty install. It's almost as if the cert isn't being accepted/applied.
marnett2005 said:
I am having issues with this not maintaining the Connection to my Android Wear device. It seems to disconnect, and then forget the connection. Facebook and Snapchat will not start, even after deleting the folders in the previous posts.
Click to expand...
Click to collapse
I think this might be a Bluetooth problem in general--I have to re-pair my car to my phone every time I get in.
Icanthelplt90 said:
Anyone here tested out Qi Charging yet?
Click to expand...
Click to collapse
Works fine for me!
I saw in the other thread that there were data issues with some builds. Have those been resolved, or is it still inconsistent?
goldsmitht said:
Does CM13 still require you to reformat any external SD card it recognizes? Sorry, haven't tried this new version, and will have to back up my card if this is still a requirement
TIA
:cyclops:
Click to expand...
Click to collapse
I read somewhere that if you try booting twrp, unmount then remount the sdcard, it may work
---------- Post added at 11:28 PM ---------- Previous post was at 11:26 PM ----------
@invisiblek with the 35b bootstack, can I flash it if I'm on 12.1 still? And then the subsequent radio as well?
goldsmitht said:
Does CM13 still require you to reformat any external SD card it recognizes? Sorry, haven't tried this new version, and will have to back up my card if this is still a requirement
TIA
:cyclops:
Click to expand...
Click to collapse
I didn't have any issues, though it did ask me to configure my sd card. Basically, you can decide to use the "transfer" option, which leaves it alone, or you can format it as internal storage. Note: if you go with the internal storage, it won't work with any other devices and will require a format.
---------- Post added at 06:07 PM ---------- Previous post was at 06:04 PM ----------
Has anyone had any issues with the phone crashing randomly? I dirty flashed over my 12.1 nightly (a recent one), updated all possible gapps, and flashed the new xposed module.
Update: I decided to flash the firmware suggested in the top post, and updated supersu at the same time. Now its stuck on a boot animation loop apparently. I call this progress, because if I call it anything else I might just break down and cry. I'm preparing myself mentally for the inevitable full wipe I most likely face.
ender89 said:
Update: I decided to flash the firmware suggested in the top post, and updated supersu at the same time. Now its stuck on a boot animation loop apparently. I call this progress, because if I call it anything else I might just break down and cry. I'm preparing myself mentally for the inevitable full wipe I most likely face.
Click to expand...
Click to collapse
You don't need supersu cm has it built in.
ender89 said:
I didn't have any issues, though it did ask me to configure my sd card. Basically, you can decide to use the "transfer" option, which leaves it alone, or you can format it as internal storage. Note: if you go with the internal storage, it won't work with any other devices and will require a format.
But will I be able to use the ext sd card if I flash a backed 12.1?
Click to expand...
Click to collapse
Anybody using our tried sending mms? If it worked, then how?
The messaging apps I tried are : stock, textra, Google messenger, hangouts and one called yaati or something.
All failed for me.
ender89 said:
Update: I decided to flash the firmware suggested in the top post, and updated supersu at the same time. Now its stuck on a boot animation loop apparently. I call this progress, because if I call it anything else I might just break down and cry. I'm preparing myself mentally for the inevitable full wipe I most likely face.
Click to expand...
Click to collapse
You have to first change SELinux to permissive, then flash super su.
I didn't see it mentioned as a bug so it might be a new policy for CM but does the advanced reboot option in dev settings always revert to unchecked after reboot?
---------- Post added at 07:41 PM ---------- Previous post was at 07:38 PM ----------
a65lopez said:
Anybody using our tried sending mms? If it worked, then how?
The messaging apps I tried are : stock, textra, Google messenger, hangouts and one called yaati or something.
All failed for me.
Click to expand...
Click to collapse
I just sent a picture to test and it went through just fine, my phone was connected to Wi-Fi as well so it actually did the Wi-Fi to data handoff pretty quickly. This was using the stock messaging app.
Related
This ROM is for the AT&T SGH-I437 ONLY! It is NOT for the GT-I8730! Just because Samsung named them both "Express" does not mean they have identicle internal hardware!
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. Source code for the Samsung Express builds can be found on my github, www.github.com/jt1134. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are Unofficial builds? Builds of the latest CyanogenMod source from github. This version is not officialy supported. If you find bugs/issues you can/must discuss here (do not submit bug reports on CyanogenMod issue tracker).
Downloads
Latest build (09/24/2013): http://www.mediafire.com/download/vtb5cyupdso2a84/cm-10.2-20130925-UNOFFICIAL-expressatt.zip
md5sum: 1a6952ced901e3b1be4c745db94c8ec6
Google Apps: http://goo.im/gapps/gapps-jb-20130813-signed.zip
Installation
- First time flashing CM10.2 to your Galaxy Express (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Reporting Bugs
You are allowed to report bugs only in this thread. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
REPORT BUGS IN THIS THREAD ONLY
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Phone model:
Radio (baseband):
CM version:
CM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
FAQ
Can I request a feature?
If it is a feature in general CyanogenMod, please post the request at the CyanogenMod bug tracker.
http://jira.cyanogenmod.org
IRC
Join us on #samsung-express on freenode.net.
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Please update to the recovery below when using this ROM. It supports compressed backups, and also works with ROM manager.
http://www.mediafire.com/download/dhdudqcl9oxzwj9/CWM-6.0.3.7-I437.tar
md5sum: 29870914ec833e0b07a95143073483f5
Download....Testing
Edit:
What is your--
Phone model: I437
Radio (baseband): MB3
CM version: 10.2 UNOFFICIAL
CM Download url: this thread
Gapps version: this thread
Did you--
wipe: data/cache/ factory
restore with titanium backup: No
reboot after having the issue: No
Are you using--
a task killer: No
a non-stock kernel: No
CMSettings/Performance settings (other than stock): Default
other modifications: No
Bugs:
1- SuperUser native of CM 10.2 don't work
2- maybe it's a bug but if you want to create a second partition on the SD will not let me ride it though is the same as used in Cyanogenmod 10.1 and if it worked
3-by clicking on the SELinux option freezes the phone
4-the video is somewhat blurry and distorted
Enviado desde mi SAMSUNG-SGH-I437 usando Tapatalk 2
Everhez said:
Bugs:
1- SuperUser native of CM 10.2 don't work
Click to expand...
Click to collapse
Fixed.
2- maybe it's a bug but if you want to create a second partition on the SD will not let me ride it though is the same as used in Cyanogenmod 10.1 and if it worked
Click to expand...
Click to collapse
I don't know what you are asking.
3-by clicking on the SELinux option freezes the phone
Click to expand...
Click to collapse
Don't click on it.
4-the video is somewhat blurry and distorted
Click to expand...
Click to collapse
Fixed.
jt1134 said:
Fixed.
I don't know what you are asking.
Don't click on it.
Fixed.
Click to expand...
Click to collapse
what happens is that I make a second partition on the sd to spend CM 10.2 apps but will not let me mount
Enviado desde mi SAMSUNG-SGH-I437 usando Tapatalk 2
Updated OP. Fixed random bugs, updated to latest code from upstream CyanogenMod.
Love it so far, much better than the stock! Noob question though.. How can I install google apps onto here? I haven't found any way to do so yet. Can you point me towards a google apps package to flash?
Sworder said:
Love it so far, much better than the stock! Noob question though.. How can I install google apps onto here? I haven't found any way to do so yet. Can you point me towards a google apps package to flash?
Click to expand...
Click to collapse
READ! It's sitting right there in the download links.
JDC2389 said:
READ! It's sitting right under the download link, GAPPS is google apps.
Click to expand...
Click to collapse
wow. Thank you.
Seems Koush Su is still unstable in 4.3, I'm on Modem i437UCDMG3. Flashing supersu 1.51 zip and I'll see how it goes.
E: All is fine after switching to SuperSu, as predicted.
Bugs
native superuser is not working this must install the recovery ..Link2SD does not work on android 4.3 for the second partition
excuse my bad English but I use google translator if you do not understand me jt1134 :banghead:
Everhez said:
native superuser is not working this must install the recovery ..Link2SD does not work on android 4.3 for the second partition
Click to expand...
Click to collapse
The issues with Superuser are part of the CM10.2 bring-up process. There's technically a simple fix for it, but is has other implications. The easiest way to correct the issue for now is to go into development settings, and just toggle root access option.
As far as link2sd, I don't understand why you would use that on such a new firmware ? That's meant for outdated devices that had limited internal storage.
jt1134 said:
The issues with Superuser are part of the CM10.2 bring-up process. There's technically a simple fix for it, but is has other implications. The easiest way to correct the issue for now is to go into development settings, and just toggle root access option.
As far as link2sd, I don't understand why you would use that on such a new firmware ? That's meant for outdated devices that had limited internal storage.
Click to expand...
Click to collapse
the detail that is because I use link2sd install heavy games that are memory intensive data, then use this method to switch apps with. ,apk. ,dex. , .lib weighing pretty and so do the games space is impossible to transfer the SD
Enviado desde mi SAMSUNG-SGH-I437 usando Tapatalk 2
Games like Subway Surf are not working !!! ! It just shows a black screen ! Please help
Slim Burst !
Samkitpalecha said:
Games like Subway Surf are not working !!! ! It just shows a black screen ! Please help
Slim Burst !
Click to expand...
Click to collapse
I got a logcat with some info on trickstermod interaction and that subway surf blackscreen problem, hope it sheds some light.
The headphone jack does not work, but it still responds when something is plugged into it/removed. When I have music player playing a song, it plays through the speakers fine, then when I plug in an AUX cable, it doesn't come through the headphones. When I remove AUX it stops playing like it normally would.
Sworder said:
The headphone jack does not work, but it still responds when something is plugged into it/removed. When I have music player playing a song, it plays through the speakers fine, then when I plug in an AUX cable, it doesn't come through the headphones. When I remove AUX it stops playing like it normally would.
Click to expand...
Click to collapse
Mine works, try reflashing the OS and make sure you wipe system like 4 or 5 times.
edit: I take it back, it worked for a bit on headphone jack then some weird static and the headphone jack went dead. Here is another logcat, unplugging and replugging the headphone and restarting pandora and trying it again, same dead jack. Maybe I'll get lucky and logcat the jack going haywire in the act.
Weird, I got the headphone jack issue thing randomly, rebooted and I don't know if it did that again. But I have been having this problem with music files failing to play off my sdcard, it gets corrupted randomly. Heres another log, just take a peek at the errors I guess.
The headphone jack started to work after I rebooted my phone, but it stopped when I rebooted again. Also, another thing I've noticed is my app folders I try to create get undone after reboot. I'm not sure if this is a bug or not.
I few apks got corrupted after a reboot and I had to reinstall them, reddit news, and the adobe flash player apk in my browser.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed.
This rom is for both the Nook Tablet 512M/8GB and 1GB/16GB versions. The device code name is "acclaim".
Prerequisites:
A recovery. To install a recovery when coming from a stock device, you need to prepare a special SD card. Installation instructions can be found here on xda.
Installation:
Grab a new recovery (e.g. here https://dl.dropboxusercontent.com/u...cclaim-eng-recovery-UNOFFICIAL-20150606.0.img) and flash it with fastboot.
If you have a CM 10.1 or CM 11 installed, flash the new recovery and try the updater, otherwise download the zip from nightlies, boot to CWM and flash it.
Once a version is installed (and all bugs fixed), you will be able to use CM Updater
Settings->About tablet->CyanogenMod updates->Refresh
THE NEW NIGHTLIES HAVE EMULATED STORAGE ENABLED. YOU LOOSE ALL YOUR DATA. MAKE SURE YOU BACKUP!!!! THE INTERNAL EMMC 1GB PARTITION IS ALSO NOT ACCESSIBLE ANYMORE. COPY THE CONTENT. THE EXTERNAL SDCARD IS NOT USED ANYMORE AS PRIMARY STORAGE. ALL APP DATA ON THE SDCARD WILL BE LOST. I ALSO RECOMMEND TO WIPE.
BACKUP!
RE-PARTITIONING IS NOT MANDATORY. IF YOU WANT TO RECLAIM THE 1GB PARTITION (called media) YOU CAN TRY TO FOLLOW THE RE-PARTITION GUIDE:
https://docs.google.com/document/d/1wSAaAZfQcnvkiHKlbZ7_H1h67m2kx0mq-p3Wjgue3qA/edit?usp=sharing
PLEASE COMMENT ON THE DOCUMENT IF SOMETHING IS NOT CLEAR.
Building:
The CM wiki explains that here: http://wiki.cyanogenmod.org/w/Build_for_acclaim
Returning to stock BN firmware:
If you have installed above rom and the CWM recovery and you really hate it and want to go back to stock, you may wish to try to flash the original acclaim_update.zip from BN. You have to unzip that file and edit META-INF/com/google/android/updater-script. Drop the first two lines here:
assert(getprop("ro.product.device") == "blaze" ||
getprop("ro.build.product") == "blaze");
Zip the package again. Then go to recovery, flash the zip, wipe, and reboot.
Support:
For any issues encountered, please post into this forum, but add steps to reproduce and dmesg, logcat and audit.log information. If you don't know what this is or how to get them, try to find that out first before posting here.
Thanks:
hashcode, ntemis, kuzma30, fattire, mik_os, chrmhoffmann, and many others that contribute to cyanogenmod and especially this version.
kuzma30 - great kernel job
hashcode - we have reused lots of your work and effort for the various omap devices (esp kindle fire). It is thanks to you mainly that we are now official CM device. Also many thanks for the L bringup help.
mik_os - great touchscreen firmware flasher and other efforts
fattire - for helping us everywhere he can
ntemis - thanks for giving so much energy to this - esp for 4.4 and L I have copied lots of things from you
DISCLAIMER:
- update the CWM if you come from older versions - otherwise you'll see funny error messages when installing zip
- It is possible that you need to wipe your device. I did not do that, but...
- Also you must flash gapps. It can be found somewhere....
ATTENTION: IT SEEMS THAT DHACKER'S L GAPPS ARE TOO BIG TO FIT INTO THE SYSTEM PARTITION. Try to find a smaller one.
- The SELINUX policies are enforced now.
Known issues:
- system partition is too small for full gapps. use a mini gapp package.
- the touchscreen firmware flasher doesn't work on L. Use CM11 to flash it first.
Recently fixed:
- f2fs
- kernel updated to latest 3.0 stable
- developer settings and setup wizard (if you select backup) crash. that's fixed in nightly from 8-FEB-15.
- device encryption does work now (but who wants to do that? the device is laggy enough already )
- cmupdate / cm recovery: adb reboot recovery and cmupdater and auto install. Hopefully this is fixed now (not in nice way, but...). You need sdcard inserted to make this work (but I guess everybody has that anyway).
Get it from
http://download.cyanogenmod.org/?device=acclaim
Get ENG recovery from here. It allows to adb into recovery even when data is wiped.
File: https://dl.dropboxusercontent.com/u...cclaim-eng-recovery-UNOFFICIAL-20150606.0.img
md5sum: 6136fc49c5e9a32f115d40d762bb6f2d
Reserved
...
Amazing work Chris, Let the flashing begin.
Been waiting for this for quite a while! I can put off learning to build for another few months!
For gapps, I recommend TKRuzze's Gapps. (Just search for them on Google.) His Pico-Gapps package is pretty lightweight.
UPDATE: Couldn't flash with the provided recovery. I was able to flash it successfully using TWRP 2.8.4.0 though.
Hi,
Odd. I flashed the same (before uploading).
Did you upgrade recovery? Did you check md5 of download?
Chris
chrmhoffmann said:
Hi,
Odd. I flashed the same (before uploading).
Did you upgrade recovery? Did you check md5 of download?
Chris
Click to expand...
Click to collapse
ROM: 78f32eb89778b31a569644b21fc1e8f3
Recovery: d37f29808a682e7806fa7b77dc940453
Installed just fine here, even Netflix works!!
thanks for everyone's hard work.
topdawg7793 said:
Been waiting for this for quite a while! I can put off learning to build for another few months!
For gapps, I recommend TKRuzze's Gapps. (Just search for them on Google.) His Pico-Gapps package is pretty lightweight.
UPDATE: Couldn't flash with the provided recovery. I was able to flash it successfully using TWRP 2.8.4.0 though.
Click to expand...
Click to collapse
Can you share where you got the download for twrp 2.8.4.0? Thanks!
Sent from my LG-E970 using XDA Free mobile app
billy8362 said:
Can you share where you got the download for twrp 2.8.4.0? Thanks!
Sent from my LG-E970 using XDA Free mobile app
Click to expand...
Click to collapse
http://techerrata.com/browse/twrp2/acclaim
Download the latest version, rename it to "recovery.img". Flash it in fastboot.
If you'd rather not go that route, download a flashable of an older version of TWRP, use 7zip to delete the recovery.img in that folder, then move this new TWRP into that folder. Then flash that.
topdawg7793 said:
Been waiting for this for quite a while! I can put off learning to build for another few months!
For gapps, I recommend TKRuzze's Gapps. (Just search for them on Google.) His Pico-Gapps package is pretty lightweight.
UPDATE: Couldn't flash with the provided recovery. I was able to flash it successfully using TWRP 2.8.4.0 though.
Click to expand...
Click to collapse
Hi,
Can you provide /tmp/recovery.log for those who can't flash with that provided recovery?
Chris
Installed with latest TWRP. ROM working fine, no random reboots. Have some troubles with SDcard: unmounting ok, formating, mounting, detecting not working.
Update:
All ok after i format 10+11 partitions.
chrmhoffmann said:
Hi,
Can you provide /tmp/recovery.log for those who can't flash with that provided recovery?
Chris
Click to expand...
Click to collapse
Too busy to play with my Nook this week. I recall it was having issues with signature verification. I wasn't able to locate a way to disable signature verification.
Pepe.II said:
Installed with latest TWRP. ROM working fine, no random reboots. Have some troubles with SDcard: unmounting ok, formating, mounting, detecting not working.
Click to expand...
Click to collapse
Same issue here ... used TWRP ... everything seems to work except I don't have an SD card ... which is a deal breaker for this tablet.
UPDATE: Used the wrong GAPPS the first time ... working fine now ... sluggish, but nothing seems to be broken ... and I didn't do a factory reset ... just cache/davlik cache clear then flash
Get ready for Bexus-L
Kickass! Thank you to every dev who made it possible for Android L to be on NT!
Question: is it absolutely mandatory to install Google's crapware Gapps? I use F-Droid on all my other Android devices. They run much lighter.
---------- Post added at 10:47 PM ---------- Previous post was at 10:23 PM ----------
Edit: It works without Gapps. Also, bug found: if you enable development settings, when you tap on developer options, it says "Unfortunately, Settings has stopped"
Edit2: Kodi (XBMC) for Android does not work. Says "Cannot parse CPU features." Didn't happen on CM11.
Tell me more about this F-Droid ... what does it gain me over GAPPs? Performance?
sagirfahmid3 said:
Kickass! Thank you to every dev who made it possible for Android L to be on NT!
Question: is it absolutely mandatory to install Google's crapware Gapps? I use F-Droid on all my other Android devices. They run much lighter.
---------- Post added at 10:47 PM ---------- Previous post was at 10:23 PM ----------
Edit: It works without Gapps. Also, bug found: if you enable development settings, when you tap on developer options, it says "Unfortunately, Settings has stopped"
Edit2: Kodi (XBMC) for Android does not work. Says "Cannot parse CPU features." Didn't happen on CM11.
Click to expand...
Click to collapse
jerrygarcia4295 said:
Tell me more about this F-Droid ... what does it gain me over GAPPs? Performance?
Click to expand...
Click to collapse
Google's apps come with Google's playstore, sync services, etc, which add overhead to wi-fi and CPU cycles.
F-droid doesn't have those services. It's pretty much like a Linux package manager--you use it to install and keep track of open source packages.
Besides, I only use my phones and tablets for Kodi and phone calls. I'm not into Google Hangouts or YouTube, etc. I don't take pictures, I don't use the GPS...
IMO, I find Android to be completely useless. I wish there was a completely open source and open hardware Linux running phone. With Linux, you can do whatever you want.
I had to go back to CM11 ... superuser appears to be broken when I go to CM12 ... is there a fix for this?
jerrygarcia4295 said:
I had to go back to CM11 ... superuser appears to be broken when I go to CM12 ... is there a fix for this?
Click to expand...
Click to collapse
I haven't installed cm12 on my nook tablet yet, but on other cm12 installs, you have to enable superuser in Settings / Developer options / Root access. Click one of the boxes other than the default "Disabled". If that doesn't work, some folks swear by SuperSU, which you can find in the Play Store
LineageOS 13.0 (Marshmallow) {un,}official builds for the Droid Razr
LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at any of us for messing up your device, we will laugh at you.
* Collectively, and at the same time.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Use these builds on your own risk!
Builds:
Current official builds:
https://download.lineageos.org/spyder (Droid Razr)
https://download.lineageos.org/umts_spyder (Razr)
(When migrating from CM (official and unofficial) or Lineage unofficial, flash this first (manually mount /data in TWRP before flashing and unmount it afterwards) and then directly flash the new image without rebooting)
Su addon for official builds: http://droid.cs.fau.de/lineage-13.0/addonsu/ (The official addon doesn't currently install on Omap4)
Current unofficial manual builds:
https://droid.cs.fau.de/lineage-13.0/
Old official CM nightly builds and snapshots:
https://droid.cs.fau.de/Official_CM_Builds/spyder/ (Droid Razr)
https://droid.cs.fau.de/Official_CM_Builds/umts_spyder/ (Razr)
Old manual builds:
https://droid.cs.fau.de/cm-13.0/test/
Changes (only device/family specific, CM base is always synced before build and contains more changes):
2017-03-25:
Sync with LineageOS (March security level)
2017-03-02:
Sync with LineageOS
2017-02-19:
Fix 10 kernel security bugs
Add SGX Omap4-changes
Sync with LineageOS
2017-02-10:
Sync with LineageOS (January security patchlevel)
2017-02-01:
Sync with LineageOS
2017-01-11:
Sync with LineageOS
Rebrand to lineage
2016-01-21:
Official CM13 nightlies: http://review.cyanogenmod.org/#/c/129192/
2016-01-16:
Added SELinux rules to allow fsck on stock-partitions and fixboot to unmount safestrap-partition
Graphics glitches fixed
zRAM uses 2 compression streams now
2016-01-14:
Implemented LiveDisplay/Color Calibration
2016-01-13:
More fixes for switching CDMA devices to GSM
T-Mobile CZ APN corrected
2016-01-11:
Preferred network type is now set earlier
Audio-routing through dock-audio (desk/car) added
Mouse-pointer (USB/Lapdock) fixed
2016-01-08:
Camera no longer crops pictures in portrait mode
USB storage integration added
Initial root-mode setting fixed
Migrated from busybox to toybox, busybox is gone
Fixed duration of boostpulse in power HAL
2016-01-06:
VZW data fixed
Reboot to recovery fixed
Wifi configuration updated
Widevine blobs updated (from sprout)
2016-01-04:
Adoptable storage fixed
Many kernel patches to filesystem-, block- and mmc-layers
2015-12-25:
Fixed internal storage for real. You need to manually remove /data/system/storage.xml and reboot when upgrading from previous builds. After that the internal storage will be the primary sd.
2015-12-24:
Fixed crashes of com.android.phone on GSM/UMTS (XT894/XT912)
Configure internal storage like expected in M (can't be adopted, would kill safestrap)
Fixed GPS initialization failing most of the time
Run wifi calibration at an earlier stage
Workaround for VZW data: toggle airplane mode after boot once
Something which needed ffmpeg and imagemagick
2015-12-18:
Switching of preferred network fixed
SELinux rules updated
SELinux is now enforcing
2015-12-14:
Audio-routing fixed
2015-12-11:
Capacitive buttons on {umts_,}spyder are no longer recognized as an external stylus, but as buttons
SELinux policies updated
Update widevine from mako
Added (very slow) emulation of idiv-operations not supported by Omap4 but required by newer blobs (gapps swype, widevine)
2015-12-07:
First build for most devices
What's working:
Phone (tested on Verizon and on GSM/UMTS in Europe)
Mobile data
WiFi
GPS
Camera
HDMI
Playback of DRM-protected content (using Widevine from sprout)
Reboot to recovery
What's not working:
Probably most everything else, including, but not limited to:
Data encryption (due to safestrap)
Gapps:
OpenGApps
If you install Gapps after the ROM has been booted for the first time you either need to wipe data or manually delete /data/system/users/0/runtime-permissions.xml and reboot. Without this Gapps will crash constantly. This is due to the new permissions-system in M.
Installation:
You need a recovery supporting SELinux
A version of Safestrap (3.75) which supports SELinux can be found here: https://github.com/stargo/android_packages_apps_Safestrap/releases/tag/v3.75
Please read the instructions on how to install this version and follow the order of the steps in it.
GSM users with XT912:
These versions (both unofficial and official) automatically switch to GSM/UMTS without installing additional patches.
Source / Repositories:
spyder device-support: https://github.com/LineageOS/android_device_motorola_spyder/tree/cm-13.0
umts_spyder device-support: https://github.com/LineageOS/android_device_motorola_umts_spyder/tree/cm-13.0
omap4-common device-support: https://github.com/LineageOS/android_device_motorola_omap4-common/tree/cm-13.0
omap4-common kernel: https://github.com/LineageOS/android_kernel_motorola_omap4-common/tree/cm-13.0
local manifest to build cm-13 for the Motorola Omap4 devices: http://droid.cs.fau.de/lineage-13.0/local_manifest.xml
XDA:DevDB Information
LineageOS 13.0 on Motorola Droid Razr, ROM for the Motorola Droid RAZR
Contributors
stargo, Hashcode, Dhacker29
Source Code: https://github.com/LineageOS
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: LineageOS
Version Information
Status: Nightly
Beta Release Date: 2017-03-25
Created 2015-12-14
Last Updated 2017-06-12
I think i will create a slot...Hail razr!!!!
Thanks for the thread! I can finally post in this thread now. As always, great work on getting MM preforming excellently on the RAZR and other OMAP-4 devices.
The only problems I see with the last two builds is my gps. I find no satelites in cm13. On cm11 and CM12 I find and lock on to 13 satelites almost instantly, under cm13 none. I use gps toolbox to test as it works on my Moto xpe running marshmallow, so I know it's os compatible.
Sent from my XT1575 using Tapatalk
Thank you @stargo. You've done a fine job indeed.
I'm not sure if it's just me, but I can't seem to switch to 2G/EDGE. When I go to settings>mobile networks>preferred network type and switch it to 2G, nothing happens - it stays on HSDPA. I tested this because I noticed Intelli3G and Smart Network xposed modules didn't seem to ever switch device to 2G.
Sent from my Motorola RAZR Maxx (XT910)
Thanks @stargo aka michael..cheers:thumbup:
Sent from my DROID RAZR using Tapatalk 2
d.casper.b said:
Thank you @stargo. You've done a fine job indeed.
I'm not sure if it's just me, but I can't seem to switch to 2G/EDGE. When I go to settings>mobile networks>preferred network type and switch it to 2G, nothing happens - it stays on HSDPA. I tested this because I noticed Intelli3G and Smart Network xposed modules didn't seem to ever switch device to 2G.
Click to expand...
Click to collapse
confirm this problem
Hi,
d.casper.b said:
Thank you @stargo. You've done a fine job indeed.
Click to expand...
Click to collapse
I'm not sure if it's just me, but I can't seem to switch to 2G/EDGE. When I go to settings>mobile networks>preferred network type and switch it to 2G, nothing happens - it stays on HSDPA.
Click to expand...
Click to collapse
This should be fixed by http://review.cyanogenmod.org/#/c/124354/ and http://review.cyanogenmod.org/#/c/124355/. But I still need to do some more testing before merging these.
Cheers,
Michael
stargo said:
Hi,
This should be fixed by http://review.cyanogenmod.org/#/c/124354/ and http://review.cyanogenmod.org/#/c/124355/. But I still need to do some more testing before merging these.
Cheers,
Michael
Click to expand...
Click to collapse
Hey there @stargo, thanks for those latest fixes, but I found something that may be of your concern:
For some reason, the "mount point" for the internal storage is being mounted inside the /data partition (shared with /system, as you know, of course) and not in the actual internal storage partition. I'm on a XT910 and when I look though the system I see that the "internal storage" has only 3,45GB (which is the system/data partition, not the actual internal storage), and the actual internal storage (7,9GB partition) is nowhere to be found. When I booted into BootStrap I could actually see the 8GB internal storage instead of the 3,45GB (system/data) storage.
Edit: Stock ROM slot.
Spazmatism said:
Hey there @stargo, thanks for those latest fixes, but I found something that may be of your concern:
For some reason, the "mount point" for the internal storage is being mounted inside the /data partition (shared with /system, as you know, of course) and not in the actual internal storage partition. I'm on a XT910 and when I look though the system I see that the "internal storage" has only 3,45GB (which is the system/data partition, not the actual internal storage), and the actual internal storage (7,9GB partition) is nowhere to be found. When I booted into BootStrap I could actually see the 8GB internal storage instead of the 3,45GB (system/data) storage.
Click to expand...
Click to collapse
I also noticed this but assumed it would work if installed on stock.
I can't access the calendar.. It asks for my Google account and then says it already exists. Probably not ROM related though.
Sent from my Motorola RAZR Maxx (XT910)
d.casper.b said:
I also noticed this but assumed it would work if installed on stock.
I can't access the calendar.. It asks for my Google account and then says it already exists. Probably not ROM related though.
Sent from my Motorola RAZR Maxx (XT910)
Click to expand...
Click to collapse
Hey there,
Well, i'm actually on Stock slot. Which is what worries me. It's the only 'major bug' I have found so far with this build.
I seem to have problem with the music app volume, when press play and sound suddenly increased. one was like me? Other software may resolve the issue . @stargo, great build, my phone is very fast :good:.
---------- Post added at 07:10 PM ---------- Previous post was at 06:57 PM ----------
d.casper.b said:
I can't access the calendar.. It asks for my Google account and then says it already exists. Probably not ROM related though.
Click to expand...
Click to collapse
me too
d.casper.b said:
I also noticed this but assumed it would work if installed on stock.
I can't access the calendar.. It asks for my Google account and then says it already exists. Probably not ROM related though.
Sent from my Motorola RAZR Maxx (XT910)
Click to expand...
Click to collapse
calendar works, but i installed pico-gaaps, and calendar.apk from rom zip.
---------- Post added at 03:39 PM ---------- Previous post was at 03:04 PM ----------
can somebody confirm that application like Cool Reader, Golden Dict, Camera dont make access to external storage card?
Nvm, the internal storage bug still persists.
wifi passwords arent being stored. just FYI.
@transi1 Try going into the App info screen for the app that is having problems with storage, and give it storage permission. That solved a few problems for me. hope this helps.
Bobcus Leper said:
Nvm, the internal storage bug still persists.
Click to expand...
Click to collapse
Confirmed on XT910, Stock slot. (Made quite a bug report a few pages ago but stargo probably didn't see it.)
AudioFx break the sound, music app is not the problem
Hi,
Spazmatism said:
Confirmed on XT910, Stock slot. (Made quite a bug report a few pages ago but stargo probably didn't see it.)
Click to expand...
Click to collapse
The strange internal storage is not a bug (sadly). Marshmallow removed support for internal sdcards and now only supports /data/media or external sdcards as primary sdcard. The wrong amount of displayed memory is due to a workaround I added to have the internal storage accessible at all again: https://github.com/CyanogenMod/andr...mmit/6e21e5dc91ee06089b73a058cea871359810a994
Cheers,
Michael
Flashed on stock slot with pico open gapps+supersu+xposed.
The internal storage bug is there,I have some folders but they are empty,like the download folder for example...
But I have a problem with Greenify,it can't put to sleep any app
---------- Post added at 11:11 AM ---------- Previous post was at 10:18 AM ----------
welder73 said:
Flashed on stock slot with pico open gapps+supersu+xposed.
The internal storage bug is there,I have some folders but they are empty,like the download folder for example...
But I have a problem with Greenify,it can't put to sleep any app
Click to expand...
Click to collapse
I can't edit my post because Xda app doesn't work and there is no option to edit posts in Xda labs...
Greenify does work but only in non-root mode,strange
welder73 said:
Flashed on stock slot with pico open gapps+supersu+xposed.
The internal storage bug is there,I have some folders but they are empty,like the download folder for example...
But I have a problem with Greenify,it can't put to sleep any app
---------- Post added at 11:11 AM ---------- Previous post was at 10:18 AM ----------
I can't edit my post because Xda app doesn't work and there is no option to edit posts in Xda labs...
Greenify does work but only in non-root mode,strange
Click to expand...
Click to collapse
I lost my root after flashing and how rooting my device again?i mean..i have s.u but i cant acces root mode
Sory my bad english
Sent from my DROID RAZR using Tapatalk 2
LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOSdoes still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial LineageOS 13.0 builds for v2awifi (SM-T900). The following will not be supported here:
Custom kernels
Mods
Xposed
Do not ask for ETAs. If you do, I will ignore you and your post.
SEANDROID ERROR
If you see a message at boot about Recovery or Kernel is not SEANDROID Enforcing, you can ignore it. This is just telling you that you are not running Samsung stock software. It has no effect on recovery or the ROM itself nor related to either.
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Bootloader Information
You need to make sure you have a Lollipop bootloader installed or else your device won't boot. Here you can go grab the latest bootloader and odin and flash it in download mode. Read all the steps before you do this.
Make sure you have a full backup because just in case you something fails.
Here are the steps to flash this via ODIN:
Make sure you have a full backup because just in case you something fails. Here are the steps to flash this via ODIN.
Reboot your tablet into download mode. Do this by first switching off the phone, then pressing and holding the volume down + home button together and then pressing the power button. Press volume up button to enter download mode.
Open ODIN on your computer. You?ll see the ID:COM box turning yellow with a COM port number upon successful connection with the tablet.
In ODIN click the BL button, select the bootloader firmware. It's a tar file.
Make sure Auto Reboot & F. Reset Time options are selected in ODIN
Click on the start button. When the process is completed your phone will reboot.
Installation
Download the zip(s)
Install a compatible Recovery (This will not work with the P900 recovery)
--1.*I have built a new version of TWRP with the MM kernel. MTP, Vibations, ADB now work and there are performance increases. The rom will need to allow v2awifi naming for flashing in recovery. Link
Perform a nandroid backup of your current ROM (optional)
Wipe data/factory reset
Flash LineageOS
Install the Google Apps addon package (Optional)
Reboot
Issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs or it didn't happen! You can use this: Syslog App
Downloads
Nightlies
Latest Nightly Date 12/23/16
Device Builds
Google Apps
http://opengapps.org/ - Thanks to the OpenGapps team!
Issues
Lower than stock audio volumes
MHL out to TV not working
The LineageOS team would like to thank everyone involved in helping with testing, coding, debugging, & documentation.
Source:
Kernel: Link
Device Tree: Link
Credits
@Valera1978 Initial device tree
@UpInTheAir for his kernel magic and misc fixes
@chhaggerty, @tbjr50 and @titidu3701 for their testing efforts
Exynos5420 Dev Team ( @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart )
XDA: DevDB Information
[6.0.x|SM-T900| Unofficial LineageOS 13.0 (v2awifi), ROM for the Samsung Galaxy Tab Pro 12.2
Version Information
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Status: Stable
Created 2016-10-01
Last Updated 2016 -12-23
Kernel Info:
M Kernel base from the Galaxy Tab S
M GPU driver from Galaxy Tab S
CPU Voltage Control
CPU OverClock/UnderClock (Up to 2.1GHZ)
MIF/INT Voltage Control
UKSM instead of KSM
Added the following IO Schedulers: fifo, fiops, sioplus, tripndroid, vr, zen, bfq (Default)
Full f2fs support updated off the mainline (Stock cm kernel has limited support)
Modified Thermal Throttling temperatures for all devices so hopefully they won't get as hot
Exynos thermal exposed to sysfs
Android Logger disabled by default can be enabled over sysfs
WQ power efficient workqueues (Still need to apply in more places)
Frandom Support
Readahead bumped to 256 from 128
Currently Disabled:
GPU Voltage Control/GPU OverClock/UnderClock (Needs to be rewritten for the M driver)
Awesome!
Thank you very much Tom!
Thank you! I would like to report that vibration isn't working. Other than that, everything works great.
c19932 said:
Thank you! I would like to report that vibration isn't working. Other than that, everything works great.
Click to expand...
Click to collapse
I will look into this. I am fairly confident I know what the fix is. Thanks for the feedback.
Hmmm...
I did wipe cache/dalvik cache/system and data with TWRP 2.8.7.0
and installed your cm-13.0-20161001-UNOFFICIAL-v2awifi.zip along with the open_gapps-arm-6.0-pico-20160925.zip (which I got as .ZIP for/from my Nexus 10)
After installing wiping cache/dalvik cache again and reboot system - but then after the SM-T900 Logo the screen is only blank.
No boot animation and no other sign that it will do something.
I could go to TWRP via Power+VolUp+Menue....
Do you got an Idea what went wrong?
[EDIT] also only the cm-13.0-20161001-UNOFFICIAL-v2awifi.zip without Open GApps gives me a black screen.
For now Iam back on CM 12.1 from the 09.07. and pico Open GApps from today.
Why was the SM-T900 files formerly named v2wifixx and now v2awifi? Could this be a problem for me?
guidol, try updating your bootloader, as per the OP.
TP, thanks much for your work on Tab/Note Pro 12.2.
gorgthetroll said:
guidol, try updating your bootloader, as per the OP.
TP, thanks much for your work on Tab/Note Pro 12.2.
Click to expand...
Click to collapse
How to do that? I have the same issue. Thnx
gorgthetroll said:
guidol, try updating your bootloader, as per the OP.
Click to expand...
Click to collapse
Thanks @gorgthetroll
Now it works - didnt read the part before the installtion carefully enough
@kutzman: read the part above the part of the installtion instruction:
Bootloader Information
You need to make sure you have a Lollipop bootloader installed or else your device won't boot.
I did this Bootloader-Part with Odin (Ok, on my device I has it to fo 2 times and 2 times it told me OK, but it did boot with a read Message about the Kernel in the 2nd try.
Now - after the seond try of the BootLoader-Flash my SM-T900 did boot - so I updated the TWRP via Flashify to the latest version (3.0.2.0) - but for that you have to enable root access in the developer options of CM13
thompatry said:
I will look into this. I am fairly confident I know what the fix is. Thanks for the feedback.
Click to expand...
Click to collapse
Does look great the first version of the CM13 for the SM-T900 :good:
Sadly I can confirm the missing vibration.
But as I did promise you - I donated another $30 for the "working" version of CM13 :laugh:
I hope this will encourage your development on the SM-T900-Builds! :angel:
guidol said:
Does look great the first version of the CM13 for the SM-T900 :good:
Sadly I can confirm the missing vibration.
But as I did promise you - I donated another $30 for the "working" version of CM13 :laugh:
I hope this will encourage your development on the SM-T900-Builds! :angel:
Click to expand...
Click to collapse
Thanks a lot to Guidol for being the most generous "facilitator", helping keep our great Tom in great spirit
Glad to see this rom!
Thank you for a working MM build for this amazing tablet, which I lost hope for any development. I appreciate all the hard work you put into getting this working!
I am having issues with the Play Store hanging at times and the File Manager not showing up properly and slowing down the device significantly
Getting a lot of issues regarding "Package Installer"
No Xposed installed*
Edit: tried multiple file managers from the Play Store and each have problems. No way to view files
Neekeet said:
Glad to see this rom!
Thank you for a working MM build for this amazing tablet, which I lost hope for any development. I appreciate all the hard work you put into getting this working!
I am having issues with the Play Store hanging at times and the File Manager not showing up properly and slowing down the device significantly
Getting a lot of issues regarding "Package Installer"
No Xposed installed*
Edit: tried multiple file managers from the Play Store and each have problems. No way to view files
Click to expand...
Click to collapse
Make sure you did a clean install, as mentioned in the OP's original message, and use an up-to-date OpenGapps package (for ARM, 6.0).
Thanks,
Eric
vochong said:
Make sure you did a clean install, as mentioned in the OP's original message, and use an up-to-date OpenGapps package (for ARM, 6.0).
Thanks,
Eric
Click to expand...
Click to collapse
Thanks for the reply
I have a clean installation and the exact same Gapps package installed.
Going to reflash and see keep an eye out for better results
Anyone else notice their tablet getting really hot? near the camera front and back.
Edit: Just reflashed using the Nano Gapps package and everything seems to be working great! will update if i run into anything. I had issues using the Pico version and wonder if that is suspect to the issues I was having. Any ideas?
Neekeet said:
Thanks for the reply
I have a clean installation and the exact same Gapps package installed.
Going to reflash and see keep an eye out for better results
Anyone else notice their tablet getting really hot? near the camera front and back.
Edit: Just reflashed using the Nano Gapps package and everything seems to be working great! will update if i run into anything. I had issues using the Pico version and wonder if that is suspect to the issues I was having. Any ideas?
Click to expand...
Click to collapse
Since the system partition in SM-T900 is quite large, I've always installed the STOCK package so it would remove most of the built-in stock/AOSP apps/tools and replace them with Google ones.
Also, with the STOCK package, I can still have access to useful Google apps even after a configuration reset, and without Google login (to download apps from Google PlayStore.)
Thanks,
Eric
Neekeet said:
Edit: tried multiple file managers from the Play Store and each have problems. No way to view files
Click to expand...
Click to collapse
I didnt got a problem with the EFS Explorer.
But for some access-methods you have to grant access-rights if the app/CM13 did ask.
And I got root-access enabled in the developer options.
---------- Post added at 06:25 PM ---------- Previous post was at 06:16 PM ----------
Neekeet said:
Edit: Just reflashed using the Nano Gapps package and everything seems to be working great! will update if i run into anything. I had issues using the Pico version and wonder if that is suspect to the issues I was having. Any ideas?
Click to expand...
Click to collapse
I didnt got any Problems with the pico Open GApps.
But you have to install something like GMail afterwards to get the actual Google/Playstore Services as Update.
After that I only do install the Google-Appsvthat I want.
Love this feature not having some odd G-Services in the Background or in the System-Partition.
(and I also use the pico on my Nexus 10 with CM13 because there is the /system only 800MB in size)
---------- Post added at 06:51 PM ---------- Previous post was at 06:25 PM ----------
Neekeet said:
Anyone else notice their tablet getting really hot? near the camera front and back.
Click to expand...
Click to collapse
on normal usage I didnt noticed the tablet being really hot.
Which apps do you use at this time? games with much graphics?
Tom did write about the voltage-selector of the gfx-card(?) that the voltage cant set down for underclocking or higher for overclocking....or somthing like this....moment I will copy the part...
"
Currently Disabled:
GPU Voltage Control/GPU OverClock/UnderClock (Needs to be rewritten for the M driver)
"
Dont know if your tablet will be hot about this disabled setting....
Everything is running fine now! thanks everyone
Love having MM on this tablet finally haha
Anyone's tablet feel a bit sluggish? it may be difficult to replicate but bringing down notifications seems to have some lag to it
Neekeet said:
Anyone's tablet feel a bit sluggish? it may be difficult to replicate but bringing down notifications seems to have some lag to it
Click to expand...
Click to collapse
for its fast as before with CM12....the Notifications werent for me the fastest ones....but Iam happy wirh this first build.
guidol said:
for its fast as before with CM12....the Notifications werent for me the fastest ones....but Iam happy wirh this first build.
Click to expand...
Click to collapse
Try to change the speed for windows animations, and the transition and animator duration. You can do that in developer options half way xown deist under drawing. Change the settings from window animation s ale, transition animation scale and animator duration scale from 1 to 0.5. See attached screenshot
pandoraman said:
Try to change the speed for windows animations, and the transition and animator duration. You can do that in developer options half way xown deist under drawing. Change the settings from window animation s ale, transition animation scale and animator duration scale from 1 to 0.5. See attached screenshot
Click to expand...
Click to collapse
I did try these settings - seems to be much better - many thanks
Code:
/*
** Your warranty is now void.
**
** We are not responsible for bricked devices, dead SD cards,
** thermonuclear war, or you getting fired because the alarm app failed. Please
** do some research if you have any concerns about features included in this ROM
** before flashing it! YOU are choosing to make these modifications, and if
** you point the finger at us for messing up your device, we will laugh at you.
**
**/
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
IMPORTANT INFORMATION
Root is not included by default on LineageOS 14.1. You need to install an add-on via recovery. You only need to install this once. You can download the SU add-on here
After installation go to Settings>Developer Options>Root access and set to Apps only or Apps and ADB.
LineageOS comes with LineageOS Recovery by default, if you don't like it (like me ) you can flash alternative recoveries using IsoRec. You really need 1GB /system partition. The smallest build-configuration is larger than 512mb. You can use ODIN, but you can also use Lanchon's REPIT.
If you're interested in BLN, check this thread for a complete support of this feature.
If you're interested to go to emulated-storage, check this thread.
Official LineageOS Wiki: http://wiki.lineageos.org/
Changelog: https://www.lineageoslog.com/14.1/i9100
LineageOS official nightly builds
https://download.lineageos.org/i9100
Google Apps:
http://opengapps.org/
XDA:DevDB Information
Lineage OS 14.1, ROM for the Samsung Galaxy S II
Contributors
rINanDO, lysergic acid, serenitys
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Based On: LineageOS
Version Information
Status: Nightly
Created 2017-02-13
Last Updated 2017-04-20
Reserved
gapps link dead
[i9100] Useful fixes for LineageOS 14.1 [7.1.2]
[i9100] Useful fixes for LineageOS 14.1 [7.1.2]
I am very glad that you are here!
It may be helpful to you:
Scripts moved here ...
BatyuS said:
gapps link dead
Click to expand...
Click to collapse
I think ist is just a mistake and should mean "open gapps"
http://opengapps.org/
Sent from my ME173X using XDA-Developers Legacy app
In General forum? Why not in Original Android Development?
Which GApps exactly?
Just to prevent from questions like "which GApps architecture and version do I need?"
This link will show you the minimal OpenGapps variant independently of your last visits (cookies never forget you)
http://opengapps.org/?download=false&arch=arm&api=7.1&variant=pico
(so only the variant needs to be changed if you prefer bigger packages)
Edit: Check this post to see how to create a customizable config that allows you to control the OpenGApps installer, e.g. to downsize bigger GApps packages for flashing Pixel Launcher while skipping other components you don't want. Included a sample config-file there as well.
I have questions:
FM Radio?
upgrade of CM 13?
TWRP emuled storage installation and new repit procedure?
from cm-13.0-20161218-nightly to lineageOS 14.1
shkedov said:
In General forum? Why not in Original Android Development?
Click to expand...
Click to collapse
Hi everyone, I am a low-average level user so I wonder if there is a step-by-step guide to upgrade my I9100-international from cm13 to lineageOS 14.1
bepcan said:
Hi everyone, I am a low-average level user so I wonder if there is a step-by-step guide to upgrade my I9100-international from cm13 to lineageOS 14.1
Click to expand...
Click to collapse
Only if you're coming from cm13 without losing data (i.e. your apps installed). Otherwise - wipe clean and install the recent nightly only (and gapps if you wish).
-3. Get a good cup of coffee.
-2. You must have at least 1GB partition of /system. If not, first repartition your storage (see OP) and then come back to here to proceed.
-1. Proceed to oficial download site: "https://download.lineageos.org/i9100 for the current build, https://www.androidfilehost.com/?w=files&flid=154035 for the experimental build, thanks to @ale5000 for uploading this for us.
0. Download the latest 2 following files: Nightly and Experimental (as for now lineage-14.1-20170208-experimental-i9100-signed.zip and lineage-14.1-20170208-nightly-i9100-signed.zip). Verify their md5 checksum to prevent errors, it is vital to do so.
Optional - download gapps from [url]http://opengapps.org/[/URL] for android 7.1, ARM (the nano is fine for me).
1. Boot into recovery. Install the "experimental" zip (Dirty flash! No wipes!).
1.5. You can reboot now into system, just to get a systemUI crash errors and a blank screen. Pretty useless. If you got to here then force reboot to recovery and proceed to step 2.
2. Reboot into recovery! Install the "Nightly" zip and gapps.
3. Wipe cache and boot to system.
There you go kiddo'.
Good luck! :fingers-crossed:
Whats Working Nd Not Working Tell Pls
rowdykumar786 said:
Whats Working Nd Not Working Tell Pls
Click to expand...
Click to collapse
It is relatively very stable to me, most is working! Phone and RIL, audio, GPS, BT, and a lot more!
I believe battery has improved too. Performance is very well.
This is my only phone, I rely on this phone, and on my daily use no problems so far! And yeah this ROM rocks!:good:
Go for it dude!
I experience a problem with libUMP making my own build. Is this : https://forum.xda-developers.com/showthread.php?p=69920779 still a working solution?
Verstuurd vanaf mijn GT-P7500 met Tapatalk
shkedov said:
Without losing data (i.e. your apps installed).
-3. Get a good cup of coffee.
-2. You must have at least 1GB partition of /system. If not, first repartition your storage (see OP) and then come back to here to proceed.
-1. Go to https://download.lineageos.org/i9100.
0. Download the latest 2 following files: Nightly and Experimental (as for now lineage-14.1-20170208-experimental-i9100-signed.zip and lineage-14.1-20170208-nightly-i9100-signed.zip). Verify their md5 checksum to prevent errors, it is vital to do so.
Optional - download gapps from http://opengapps.org/ for android 7.1, ARM (the nano is fine for me).
1. Boot into recovery. Install the "experimental" zip (Dirty flash! No wipes!).
1.5. You can reboot now into system, just to get a systemUI crash errors and a blank screen. Pretty useless. If you got to here then force reboot to recovery and proceed to step 2.
2. Reboot into recovery! Install the "Nightly" zip and gapps.
3. Wipe cache and boot to system.
There you go kiddo'.
Good luck! :fingers-crossed:
Click to expand...
Click to collapse
Do you don't include TWRP emu 3.03 https://forum.xda-developers.com/showpost.php?p=71009597&postcount=88 Interesting
Yes I would like to know upgrade path to official using twrp3.0.3 for emulated storage too please
todonormal said:
Do you don't include TWRP emu 3.03 https://forum.xda-developers.com/showpost.php?p=71009597&postcount=88 Interesting
Click to expand...
Click to collapse
People asked for a simple migrating guide from CM13 to LOS14.1, if someone isn't heading to switch to emulated I don't see a reason to send people to install an emu-recovery while they don't wish to.
It should be a decision for users.
Therefore I don't see a reason to include special addtional options besides the basics (exp+nightly+gapps). Whoever wants to expand more should simply read the OP and the links.
As for myself yes, I'm on emu now.
shkedov said:
People asked for a simple migrating guide from CM13 to LOS14.1, if someone isn't heading to switch to emulated I don't see a reason to send people to install an emu-recovery while they don't wish to.
It should be a decision for users.
Therefore I don't see a reason to include special addtional options besides the basics (exp+nightly+gapps). Whoever wants to expand more should simply read the OP and the links.
As for myself yes, I'm on emu now.
Click to expand...
Click to collapse
Could we have a short video to show how to switch to emulated storage?
Regards.
New build lineage-14.1-20170213-nightly-i9100-signed.zip is up
https://www.lineageoslog.com/14.1/i9100
laptopu said:
Yes I would like to know upgrade path to official using twrp3.0.3 for emulated storage too please
Click to expand...
Click to collapse
Hmm, because this phone is my main and only phone, I won't be able to test that soon (reverting recovery and ROM to cm13, reverting repartitioning too, then starting to trial and error).
But I believe that the safest way is to start from the moving to LOS14.1 - flashing the experimental and nightly first, as I guided. Then later flash emu-twrp recovery and proceed with rINanDO's instructions.
I'm afraid doing opposite (emu'ing first and then flash exp+nightly) might not work since Lanchon and the guys warned us that this emu-kernel might not work even with cm13 and maybe even affect it! Maybe repiting manually with Lanchon's magic REPIT would do, then migrate ROM, then change to new emu-recovery.
PLEASE:
- don't direct-link to recoveries that will brick your phone if installed too early.
- read the linked threads in the opening posts to understand the complexity of any of the changes
- if understood the consequences and you still want to do them all at once: know your limits
- if still feeling comfortable until here: go ahead *but do it in the correct order* or your phone will bootloop as all the newer test-recoveries were built with a Nougat ramdrive and thus will very very likely bootloop on your phone if installed on non-Nougat ROMs!
So my advice for your own safety: stay in your lane and read everything first.
EDIT: And by the way: please keep emulated storage discussions in the appropriate thread until it is officially tested and documented to be kind of noob-proof.