This ROM is for the AT&T SGH-I437 ONLY! It is NOT for the GT-I8730! Just because Samsung named them both "Express" does not mean they have identicle internal hardware!
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. Source code for the Samsung Express builds can be found on my github, www.github.com/jt1134. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What are Unofficial builds? Builds of the latest CyanogenMod source from github. This version is not officialy supported. If you find bugs/issues you can/must discuss here (do not submit bug reports on CyanogenMod issue tracker).
Downloads
Latest build (09/24/2013): http://www.mediafire.com/download/vtb5cyupdso2a84/cm-10.2-20130925-UNOFFICIAL-expressatt.zip
md5sum: 1a6952ced901e3b1be4c745db94c8ec6
Google Apps: http://goo.im/gapps/gapps-jb-20130813-signed.zip
Installation
- First time flashing CM10.2 to your Galaxy Express (or coming from another ROM)?
Root your device and install ClockworkMod Recovery.
Reboot into Recovery using 3-button-combo
Do a Nandroid backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon
Reporting Bugs
You are allowed to report bugs only in this thread. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
REPORT BUGS IN THIS THREAD ONLY
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Phone model:
Radio (baseband):
CM version:
CM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
FAQ
Can I request a feature?
If it is a feature in general CyanogenMod, please post the request at the CyanogenMod bug tracker.
http://jira.cyanogenmod.org
IRC
Join us on #samsung-express on freenode.net.
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Please update to the recovery below when using this ROM. It supports compressed backups, and also works with ROM manager.
http://www.mediafire.com/download/dhdudqcl9oxzwj9/CWM-6.0.3.7-I437.tar
md5sum: 29870914ec833e0b07a95143073483f5
Download....Testing
Edit:
What is your--
Phone model: I437
Radio (baseband): MB3
CM version: 10.2 UNOFFICIAL
CM Download url: this thread
Gapps version: this thread
Did you--
wipe: data/cache/ factory
restore with titanium backup: No
reboot after having the issue: No
Are you using--
a task killer: No
a non-stock kernel: No
CMSettings/Performance settings (other than stock): Default
other modifications: No
Bugs:
1- SuperUser native of CM 10.2 don't work
2- maybe it's a bug but if you want to create a second partition on the SD will not let me ride it though is the same as used in Cyanogenmod 10.1 and if it worked
3-by clicking on the SELinux option freezes the phone
4-the video is somewhat blurry and distorted
Enviado desde mi SAMSUNG-SGH-I437 usando Tapatalk 2
Everhez said:
Bugs:
1- SuperUser native of CM 10.2 don't work
Click to expand...
Click to collapse
Fixed.
2- maybe it's a bug but if you want to create a second partition on the SD will not let me ride it though is the same as used in Cyanogenmod 10.1 and if it worked
Click to expand...
Click to collapse
I don't know what you are asking.
3-by clicking on the SELinux option freezes the phone
Click to expand...
Click to collapse
Don't click on it.
4-the video is somewhat blurry and distorted
Click to expand...
Click to collapse
Fixed.
jt1134 said:
Fixed.
I don't know what you are asking.
Don't click on it.
Fixed.
Click to expand...
Click to collapse
what happens is that I make a second partition on the sd to spend CM 10.2 apps but will not let me mount
Enviado desde mi SAMSUNG-SGH-I437 usando Tapatalk 2
Updated OP. Fixed random bugs, updated to latest code from upstream CyanogenMod.
Love it so far, much better than the stock! Noob question though.. How can I install google apps onto here? I haven't found any way to do so yet. Can you point me towards a google apps package to flash?
Sworder said:
Love it so far, much better than the stock! Noob question though.. How can I install google apps onto here? I haven't found any way to do so yet. Can you point me towards a google apps package to flash?
Click to expand...
Click to collapse
READ! It's sitting right there in the download links.
JDC2389 said:
READ! It's sitting right under the download link, GAPPS is google apps.
Click to expand...
Click to collapse
wow. Thank you.
Seems Koush Su is still unstable in 4.3, I'm on Modem i437UCDMG3. Flashing supersu 1.51 zip and I'll see how it goes.
E: All is fine after switching to SuperSu, as predicted.
Bugs
native superuser is not working this must install the recovery ..Link2SD does not work on android 4.3 for the second partition
excuse my bad English but I use google translator if you do not understand me jt1134 :banghead:
Everhez said:
native superuser is not working this must install the recovery ..Link2SD does not work on android 4.3 for the second partition
Click to expand...
Click to collapse
The issues with Superuser are part of the CM10.2 bring-up process. There's technically a simple fix for it, but is has other implications. The easiest way to correct the issue for now is to go into development settings, and just toggle root access option.
As far as link2sd, I don't understand why you would use that on such a new firmware ? That's meant for outdated devices that had limited internal storage.
jt1134 said:
The issues with Superuser are part of the CM10.2 bring-up process. There's technically a simple fix for it, but is has other implications. The easiest way to correct the issue for now is to go into development settings, and just toggle root access option.
As far as link2sd, I don't understand why you would use that on such a new firmware ? That's meant for outdated devices that had limited internal storage.
Click to expand...
Click to collapse
the detail that is because I use link2sd install heavy games that are memory intensive data, then use this method to switch apps with. ,apk. ,dex. , .lib weighing pretty and so do the games space is impossible to transfer the SD
Enviado desde mi SAMSUNG-SGH-I437 usando Tapatalk 2
Games like Subway Surf are not working !!! ! It just shows a black screen ! Please help
Slim Burst !
Samkitpalecha said:
Games like Subway Surf are not working !!! ! It just shows a black screen ! Please help
Slim Burst !
Click to expand...
Click to collapse
I got a logcat with some info on trickstermod interaction and that subway surf blackscreen problem, hope it sheds some light.
The headphone jack does not work, but it still responds when something is plugged into it/removed. When I have music player playing a song, it plays through the speakers fine, then when I plug in an AUX cable, it doesn't come through the headphones. When I remove AUX it stops playing like it normally would.
Sworder said:
The headphone jack does not work, but it still responds when something is plugged into it/removed. When I have music player playing a song, it plays through the speakers fine, then when I plug in an AUX cable, it doesn't come through the headphones. When I remove AUX it stops playing like it normally would.
Click to expand...
Click to collapse
Mine works, try reflashing the OS and make sure you wipe system like 4 or 5 times.
edit: I take it back, it worked for a bit on headphone jack then some weird static and the headphone jack went dead. Here is another logcat, unplugging and replugging the headphone and restarting pandora and trying it again, same dead jack. Maybe I'll get lucky and logcat the jack going haywire in the act.
Weird, I got the headphone jack issue thing randomly, rebooted and I don't know if it did that again. But I have been having this problem with music files failing to play off my sdcard, it gets corrupted randomly. Heres another log, just take a peek at the errors I guess.
The headphone jack started to work after I rebooted my phone, but it stopped when I rebooted again. Also, another thing I've noticed is my app folders I try to create get undone after reboot. I'm not sure if this is a bug or not.
I few apks got corrupted after a reboot and I had to reinstall them, reddit news, and the adobe flash player apk in my browser.
Related
CyanogenMod 10.2 is a free, community built distribution of Android 4.3 (Jellybean) which greatly extends the capabilities of your phone.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a preview build of CM10.2 for the Samsung Galaxy Player 4. It may cause all the things in the disclaimer to happen, or steal your girlfriend while you are busy flashing ROMs.
Note: Please backup your efs in case of something goes wrong (the zip should backup it but we're never too sure) To do so execute this command:
Code:
dd if=/dev/block/stl3 of=/sdcard/efs.rfs
Preview Install instructions:
*** If upgrading from CM9 or CM10 or even CM10.1, it is recommended that you wipe data.
1. Download cm-9-20130402-kernel-preflash.zip
md5: 4a900fcddbc3d81d121a7b9c9d4bb0a0
2. Download cm-10.2-20140210-UNOFFICIAL-ypg1
3. Make all your backups.
4. Make sure your efs is intact (not blank).
5. Boot into recovery, make more backups.
6. Flash cm-9-20130402-kernel-preflash.zip (temporary workaround for first-time install from stock)
7. Flash cm-10.2-20140210-UNOFFICIAL-ypg1
Note: To all those flashing 09/29 build and later, if you're in an old build of CM10.2, PLEASE RESTORE YOUR /EFS AFTER UPDATING!!!!. I moved the /efs partition and some items will get deleted prior flashing the update. It can lead to some issue with touchscreen with US devices.
Installation Notes:
When you install for the first time, there is a conversion to the new MTD partition layout. The installer will flash the new kernel and reboot. It is possible for this process to hang up on the samsung logo (still working that part out). It is normal to see the Samsung logo appear 3 seperate times during this reboot phase. **Please wait at least a minute before assuming you are stuck.** If this happens, you should extract the boot.img from the installer zip and flash it with heimdall (heimdall flash --kernel boot.img, or other appropriate GUI methods). It should boot back into recovery and continue the installation. Once the install finishes, it should reboot once more back into recovery, which gives you the opportunity to flash your gapps.
**Google Apps are not included in these ROMs. You'll need to install those yourself if you want them. Recommended and highly suggested are the 4.3 Gapps
Install video (Thanks Daniel644)
Known Issues:
- Video recording is limited to 800x600.
- Other things
Sources
cm-10.2 branch:
Device tree: https://github.com/bbelos/android_device_samsung_ypg1
cm-10.2-ypg1-dev branch:
Kernel source: https://github.com/bbelos/android_kernel_samsung_aries
Previous builds
cm-10.2-20131203-UNOFFICIAL-ypg1.zip
cm-10.2-20131116-UNOFFICIAL-ypg1.zip
cm-10.2-20131026-UNOFFICIAL-ypg1.zip
cm-10.2-20131014-UNOFFICIAL-ypg1.zip
cm-10.2-20130929-UNOFFICIAL-ypg1.zip
cm-10.2-20130914-UNOFFICIAL-ypg1.zip
cm-10.2-20130908-UNOFFICIAL-ypg1.zip
cm-10.2-20130821-UNOFFICIAL-ypg1.zip
cm-10.2-20130807-UNOFFICIAL-ypg1.zip
cm-10.2-20130731-UNOFFICIAL-ypg1.zip
Notice:
As per previous CM versions, it is recommend to wipe BOTH /system and /data prior installing CM10.2 into your device.
Here it is in case you're searching for it:
Gapps 4.3 Download
Issues:
- Right speaker that sound quieter than the left one (fixed 14/09)
- Front cam can't take pictures (fixed 10/02)
- Focal isn't working too (Use the stock camera app) It works but it's very slow to take a picture (07/08)
Superuser:
As 4.3 landed into our devices, the security into it has been enforced and it's possible that built-in superuser isn't working. As a simple fix, please use either this:
Koush Superuser Download
Or the newer version of SuperSU here:
http://forum.xda-developers.com/showthread.php?t=1538053
Again...
Wow! Just got this on my Gnex, not even official, and you already did it. Nice work. I'll give it a try when I have more time.
wow!
I thought your were gonna wait to perfect 4.2.2 but cant complain about keeping our device uptodate thanks.
does it have the same issues as 4.2.2?
Installed this ROM. ROM feels OK. My 90 DPI setting works. Should phone be missing from the app drawer?
Messaging crashes on boot.
Built in super user seems to be working for me.
Sent from my YP-G1 using Tapatalk 2
messaging FC's on boot and despite doing both links I still don't have a working SU app, aside from that and the lack of governors (can I use Impulse kernel on this?) seems pretty good.
Tobybitch said:
wow!
I thought your were gonna wait to perfect 4.2.2 but cant complain about keeping our device uptodate thanks.
does it have the same issues as 4.2.2?
Click to expand...
Click to collapse
Yep
daniel644 said:
messaging FC's on boot and despite doing both links I still don't have a working SU app, aside from that and the lack of governors (can I use Impulse kernel on this?) seems pretty good.
Click to expand...
Click to collapse
Hmm that's weird, I thought that super su would work. You're sure you're using the 1.51 zip? And CM10.2 is still in the works so expect fc everywhere lool.
Also impulse probably won't work with 4.3. There have been changes in the kernel and the ramdisk which makes it unusable.
Envoyé depuis mon Nexus 7 avec Tapatalk
What would have earned Superuser, you need to unlock developer mode.
Must be pressed several times on the build number in about tablet
zaclimon
You will collect kernel under 10.2 with the capabilities of both the Impulse?
How to swap the internal memory card on the outside?
While it was possible only through init.d, but when connected to the PC all comes back, you need to reboot (.
#!/system/bin/sh
mount -t vfat /dev/block/mmcblk0p1 /storage/sdcard1
mount -t vfat /dev/block/mmcblk1p1 /storage/sdcard0
Click to expand...
Click to collapse
S_m_O_k said:
What would have earned Superuser, you need to unlock developer mode.
Must be pressed several times on the build number in about tablet
zaclimon
You will collect kernel under 10.2 with the capabilities of both the Impulse?
How to swap the internal memory card on the outside?
While it was possible only through init.d, but when connected to the PC all comes back, you need to reboot (.
Click to expand...
Click to collapse
I don't understand your first question (translate must have messed up!). If it's about making a build with some impulse features, no I won't make them. (Impulse features remains in Impulse or any other custom kernel)
Also android 4.3 changes how sdcards are handled so for the moment, you can't switch them.
Well I went back into CWM did a Wipe Data/Factory reset, Wipe Cache and Wipe Dalvick then reinstalled Gapps (don't know if needed) and the Beta 2 from the first link (for superuser app) and rebooted and then enabled developer options and went down to root access and set it to Apps and ADb (was only Apps before) then opened Superuser (the new one not the baked in one) and it came up without issue so I tried to Overclock using No-Frills CPU and BANG the prompt to give Superuser access came up and all is well with the world.
Root is working now, I would not recommend trying the SuperSU 1.51 after this as it will delete the Superuser (that works) while trying to update the binaries, at which it fails to do.
are there plans to make an Impulse like kernel for this? I would really like to have the other governors as an option, I don't like the stock ones. Also for the time being I went in to the app manager and disabled messaging to prevent all the FC messages.
daniel644 said:
are there plans to make an Impulse like kernel for this? I would really like to have the other governors as an option, I don't like the stock ones. Also for the time being I went in to the app manager and disabled messaging to prevent all the FC messages.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=44148903&postcount=55
Hope it answer your question.
Envoyé depuis mon Nexus 7 avec Tapatalk
great work!
the next step should be to get official cyanogenmod
theraf said:
great work!
the next step should be to get official cyanogenmod
Click to expand...
Click to collapse
I think the issues such as camera and speakers need to be fixed before we can get official Cyanogenmod.
Official CyanogenMod would be cool.
Sent from my YP-G1 using Tapatalk 2
dorfd1 said:
I think the issues such as camera and speakers need to be fixed before we can get official Cyanogenmod.
Official CyanogenMod would be cool.
Sent from my YP-G1 using Tapatalk 2
Click to expand...
Click to collapse
Speakers isn't that much of an issue but still needs to be fixed. As for the camera definitely needs to be fixed though.
daniel644 said:
Well I went back into CWM did a Wipe Data/Factory reset, Wipe Cache and Wipe Dalvick then reinstalled Gapps (don't know if needed) and the Beta 2 from the first link (for superuser app) and rebooted and then enabled developer options and went down to root access and set it to Apps and ADb (was only Apps before) then opened Superuser (the new one not the baked in one) and it came up without issue so I tried to Overclock using No-Frills CPU and BANG the prompt to give Superuser access came up and all is well with the world.
Root is working now, I would not recommend trying the SuperSU 1.51 after this as it will delete the Superuser (that works) while trying to update the binaries, at which it fails to do.
Click to expand...
Click to collapse
I installed SuperSU 1.51 by flashing the .zip at the same time as installing the ROM. It works straight out of the box as binaries are already updated.
No wipes, just install straight over 10.1 - after the usual rebuild of the dalvik cache (android is updating...) there was a further update of databases.
I used BaNkS Gapps, which I highly recommend as it installs only the core requirement - everything else can be downloaded from Play.
To get rid of the Messaging fc pop ups, I froze the app.
The baked in superuser works fine for me. I did not have to flash super su.
Sent from my YP-G1 using Tapatalk 2
zaclimon said:
Notice:
As per previous CM versions, it is recommend to wipe BOTH /system and /data prior installing CM10.2 into your device.
Here it is in case you're searching for it:
Gapps 4.3 Download
Issues: (Same as CM10.1)
- Right speaker that sound quieter than the left one
- Front cam still wonky
- HDR mode isn't working in camera
- Focal isn't working too (Use the stock camera app)
Superuser:
As 4.3 landed into our devices, the security into it has been enforced and it's possible that built-in superuser isn't working. As a simple fix, please flash either this:
https://plus.google.com/110558071969009568835/posts/bpXwTcHafo1
Or the newer version of SuperSU here:
http://forum.xda-developers.com/showthread.php?t=1538053
Click to expand...
Click to collapse
Out of curiosity, what do you mean focal is not working. Is it that the auto focus function no longer works?
henk5066 said:
Out of curiosity, what do you mean focal is not working. Is it that the auto focus function no longer works?
Click to expand...
Click to collapse
It fcs
Swyped from my xoom
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review.
Download Links
CyanogenMod:
Nightly: http://download.cyanogenmod.org/?device=vs985&type=nightly
Google apps addon:
OpenGapps: http://opengapps.org/ (you'll want a zip for the ARM platform, Android version 6.0)
HEADS UP: Be sure you flash the gapps package with your rom. If you boot your rom, then go back and try to flash gapps after the fact, you're gonna have a bad time.
Firmware:
Your must be on the 35b boot stack. Here's a flashable zip provided by xdabbeb: https://www.androidfilehost.com/?fid=24052804347843993
Misc Links
Unoffical changelog:
Link: http://www.cmxlog.com/13/vs985/
Learn to build yourself:
Link: https://wiki.cyanogenmod.org/w/Build_for_vs985
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
[ROM][OFFICIAL] CyanogenMod 13.0 Nightlies for the Verizon LG G3, ROM for the Verizon LG G3
Contributors
invisiblek
Source Code: http://github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Nightly
Created 2015-11-24
Last Updated 2015-11-24
So do we dirty flash over unofficial or clean flash with the nuke it.apk?
rippedwarrior69 said:
So do we dirty flash over unofficial or clean flash with the nuke it.apk?
Click to expand...
Click to collapse
I dirty flashed with no issues.
A quick note for those who want to get Facebook and Messenger working . Delete the following files in your file browser (note that you must enable root access for apps in Developer Options):
/data/app/com.facebook.katana-1/lib/arm/libsslx.so
/data/app/com.facebook.orca-1/lib/arm/libsslx.so
Note that you still won't be able to make phone or voice calls in FB/Messenger.
NedDasty said:
I dirty flashed with no issues.
A quick note for those who want to get Facebook and Messenger working . Delete the following files in your file browser (note that you must enable root access for apps in Developer Options):
/data/app/com.facebook.katana-1/lib/arm/
/data/app/com.facebook.orca-1/lib/arm/
Note that you still won't be able to make phone or voice calls in FB/Messenger.
Click to expand...
Click to collapse
Did you use nukeit.apk
rippedwarrior69 said:
Did you use nukeit.apk
Click to expand...
Click to collapse
Read this post. My guess is that you do not need it. CM13 was unofficial earlier, which meant the official branch had incompatibilities with VS985, which were fixed with the Nuke-it flash. The latest official adoption, and merge, have resolved these already, but Invisiblek would be able to clarify better than I.
Thanks for the Rom. Will report on any undocumented bugs.
Reformat ext sd card?
Does CM13 still require you to reformat any external SD card it recognizes? Sorry, haven't tried this new version, and will have to back up my card if this is still a requirement
TIA
:cyclops:
The ROM itself is running STUPID fast on my phone. Love the speed of everything.
I am having issues with this not maintaining the Connection to my Android Wear device. It seems to disconnect, and then forget the connection. Facebook and Snapchat will not start, even after deleting the folders in the previous posts.
Anyone here tested out Qi Charging yet?
Trouble connecting/authenticating to Enterprise WiFi after flashing. Credentials are being rejected and authentication is failing. Has anyone else experienced this?
This happens with a fresh or dirty install. It's almost as if the cert isn't being accepted/applied.
marnett2005 said:
I am having issues with this not maintaining the Connection to my Android Wear device. It seems to disconnect, and then forget the connection. Facebook and Snapchat will not start, even after deleting the folders in the previous posts.
Click to expand...
Click to collapse
I think this might be a Bluetooth problem in general--I have to re-pair my car to my phone every time I get in.
Icanthelplt90 said:
Anyone here tested out Qi Charging yet?
Click to expand...
Click to collapse
Works fine for me!
I saw in the other thread that there were data issues with some builds. Have those been resolved, or is it still inconsistent?
goldsmitht said:
Does CM13 still require you to reformat any external SD card it recognizes? Sorry, haven't tried this new version, and will have to back up my card if this is still a requirement
TIA
:cyclops:
Click to expand...
Click to collapse
I read somewhere that if you try booting twrp, unmount then remount the sdcard, it may work
---------- Post added at 11:28 PM ---------- Previous post was at 11:26 PM ----------
@invisiblek with the 35b bootstack, can I flash it if I'm on 12.1 still? And then the subsequent radio as well?
goldsmitht said:
Does CM13 still require you to reformat any external SD card it recognizes? Sorry, haven't tried this new version, and will have to back up my card if this is still a requirement
TIA
:cyclops:
Click to expand...
Click to collapse
I didn't have any issues, though it did ask me to configure my sd card. Basically, you can decide to use the "transfer" option, which leaves it alone, or you can format it as internal storage. Note: if you go with the internal storage, it won't work with any other devices and will require a format.
---------- Post added at 06:07 PM ---------- Previous post was at 06:04 PM ----------
Has anyone had any issues with the phone crashing randomly? I dirty flashed over my 12.1 nightly (a recent one), updated all possible gapps, and flashed the new xposed module.
Update: I decided to flash the firmware suggested in the top post, and updated supersu at the same time. Now its stuck on a boot animation loop apparently. I call this progress, because if I call it anything else I might just break down and cry. I'm preparing myself mentally for the inevitable full wipe I most likely face.
ender89 said:
Update: I decided to flash the firmware suggested in the top post, and updated supersu at the same time. Now its stuck on a boot animation loop apparently. I call this progress, because if I call it anything else I might just break down and cry. I'm preparing myself mentally for the inevitable full wipe I most likely face.
Click to expand...
Click to collapse
You don't need supersu cm has it built in.
ender89 said:
I didn't have any issues, though it did ask me to configure my sd card. Basically, you can decide to use the "transfer" option, which leaves it alone, or you can format it as internal storage. Note: if you go with the internal storage, it won't work with any other devices and will require a format.
But will I be able to use the ext sd card if I flash a backed 12.1?
Click to expand...
Click to collapse
Anybody using our tried sending mms? If it worked, then how?
The messaging apps I tried are : stock, textra, Google messenger, hangouts and one called yaati or something.
All failed for me.
ender89 said:
Update: I decided to flash the firmware suggested in the top post, and updated supersu at the same time. Now its stuck on a boot animation loop apparently. I call this progress, because if I call it anything else I might just break down and cry. I'm preparing myself mentally for the inevitable full wipe I most likely face.
Click to expand...
Click to collapse
You have to first change SELinux to permissive, then flash super su.
I didn't see it mentioned as a bug so it might be a new policy for CM but does the advanced reboot option in dev settings always revert to unchecked after reboot?
---------- Post added at 07:41 PM ---------- Previous post was at 07:38 PM ----------
a65lopez said:
Anybody using our tried sending mms? If it worked, then how?
The messaging apps I tried are : stock, textra, Google messenger, hangouts and one called yaati or something.
All failed for me.
Click to expand...
Click to collapse
I just sent a picture to test and it went through just fine, my phone was connected to Wi-Fi as well so it actually did the Wi-Fi to data handoff pretty quickly. This was using the stock messaging app.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.1 (MM), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
BEFORE INSTALLING THIS ROM, MAKE SURE YOUR DEVICE MODEL IS THE SAME AS TITLE
IF YOU ASK ANY QUESTIONS LIKE "IS THIS FOR MODEL BLABLABLA" THEY WILL BE ALL IGNORGED
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We'll not support users and answer questions from users which:
are running a custom kernel
have flashed mods
modified system files
didn't follow our intructions word by word
are unfriendly
And most important: DON'T READ THE OP
What's working:
Audio
RIL (Calls, SMS, Mobile data) [Dual-SIM]
Wifi (connection, tethering, etc)
Bluetooth (need patches in download links)
Camera, video codecs
Storage (both internal and external)
Storages (internal, external, adoptable storage) (*)
Offline charging
zRAM (compressed-RAM swap)
GAPPS
Tethering (USB, Wifi, Bluetooth)
GPS
Torch (flashlight)
BUGS/Not working :
Using single SIM get no signals. To fix this, remove "persist.radio.multisim.config=dsds" from build.prop. If you need dual SIM, add it again
FM radio app doesn't work (can be opened only)
Slow 3G speed
First time installing CyanogenMod 13 to your Galaxy Core Prime, or coming from another ROM:
Install TWRP Recovery
Reboot into Recovery using 3-button-combo (Vol-up+Home+Power)
Do a Nandroid backup! (Optional and only if you weren't running TouchWiz before)
WIPE (wipe data/factory reset + wipe cache partition + format /system partition)*
Install the ROM from sdcard using TWRP Recovery
Optionally install the Google Apps ( get it here: https://opengapps.org ) (pico GAPPS recommended) (*)
Upgrading from an older build of this ROM
Wipe system partition, wipe dalvik-cache but not data partition
Optionally install Google Apps (GAPPS) (link above)
(*) NOTE: If you're about going to install GAPPS with ROM, install it right after you've installed the ROM, else you have to do a factory reset if you've booted the ROM first
Multitasking test video
DOWNLOADS:
Click to expand...
Click to collapse
ALPHA-1: Link
BETA-1: Link
BETA-2: Link
BETA-3: Link
BETA-4: Link
Want some screenshots? Get them in Screenshot tab above
XDA:DevDB Information
CyanogenMod 13, ROM for the Samsung Galaxy Core Prime
Contributors
doesntexits, Dreamstar, HASH, ngoquang2708
Source Code: https://github.com/koquantam/android_device_samsung_core33g/tree/cm-13.0
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 4.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 4
Beta Release Date: 2016-08-28
Created 2016-06-28
Last Updated 2017-11-17
CHANGELOG
ALPHA-1
Initial release
BETA-1
Fixed bluetooth and audio (included in patches)
Fixed screen flickering (thanks to @ngoquang2708)
Switched to jemalloc() memory allocator, optimized for multi-core processor
BETA-2
Added multi-user UI (find in Settings)
Fully fixed HW codecs, recorded videos no longer lags, also front cam recording has correct color
Added RIL props in build.prop
BETA-3
Fully fixed audio (thanks to @ngoquang2708)
Temporary disabled TRIM function in fstab (to prevent future problems)
Fixed STK hangs
BETA-4: Post #647
F.A.Q
Q: ROM startup too slow?
A: Nope, just because you haven't done a factory reset before installing the ROM
Q: Dead touchscreen?
A: Wrong installation method leads to this problem. Before restoring to stock through Odin, go to recovery mode (TWRP highly recommended), wipe everything in the Wipe section >> Advanced wipe (tick all system, data, cache, but not other storages, no need wiping dalvik/ART cache, as it already done by wiping data), then go to Download mode, restore stock, install custom recovery again and then, install the ROM you want
Q: ETAs?
A: See here: Link
Q: Anymore models supported?
A: SM-G360HU
Q: Is init.d supported on this ROM?
A: Every CyanogenMod ROMs support init.d, so be free at scriptings
Q: Can you include ABCXYZ feature / Samsung Apps here?
A: NO!
Q: Can I use your ROM as a base for portings?
A: Yes, you could, but give proper credits
Q: Server error in Google Play Store?
A: Install latest Google Play Services manually first (might take long time, due to Lollipop's nature), then you can install apps from GG Play as usual
Q: How to use adoptable storage feature? I see it's new in Marshmallow
A: Go to Settings >> Storage & USB >> Tap on the SD card label (not the eject icon) >> 3 dots menu on the top right >> Settings >> Format as internal and done!
Q: Where's the MTP option in Marshmallow? I don't see it in Storage settings
A: This feature has been moved to Developer settings, and will reset to default (Charging) after every reboots. Enable developer options first by tapping 7 times on Build number in About phone section >> Go to Developer settings >> Select USB configuration. The fastest way to do this is plug in your USB with your PC, scroll down notification bar and tap on "USB for Charging"
Q: Where's the "running" section in Apps settings?
A: It has been cut off separately to Memory setting and "Running services" in Developer settings. You can see the memory used by apps for a period of time and closing apps too, but they won't disappear in the menu, and in "Running services", still same as old-fashioned running apps section
Q: My phone is slow as snail after installing ROM. I've tried restoring stock and do formattings but no help?
A: I have answered this question. See this post: Link
Good job, bro. Thanks.
I'll surely test this one, when I'll be free.
I'll wait until the bugs fixed.Then I installed it.?
Deym fast.
wow thanx man
waiting for stable version
Audio patches added to OP
doesntexits said:
Audio patches added to OP
Click to expand...
Click to collapse
Bro, you're so fast at fixing bugs. :good:
@doesntexits
Bad working video record in standard gallery.
JustFrame said:
Bro, you're so fast at fixing bugs. :good:
Click to expand...
Click to collapse
Well, look at the OP, not me fixing audio bug
demchenko said:
@doesntexits
Bad working video record in standard gallery.
Click to expand...
Click to collapse
Stock has that too
doesntexits said:
Well, look at the OP, not me fixing audio bug
Click to expand...
Click to collapse
But bro, Please fix ASAP the screen flickering because it annoyed me.
Bro i cant install the patches. It says "Could not find 'META-INF/com/google/android blah-blah-blah
how we can change from cm12.1 to cm13 without losing any data?
or flash kitkat touchwiz first then go to cm13?
JustFrame said:
But bro, Please fix ASAP the screen flickering because it annoyed me.
Bro i cant install the patches. It says "Could not find 'META-INF/com/google/android blah-blah-blah
Click to expand...
Click to collapse
Link edited
wtf! Can not imagine. So fast. Looks like @doesntexits is entering too fast in CM13, never exits. LOL!
Wishi123 said:
Playstore not working haha.
Click to expand...
Click to collapse
Same here sometimes
Sent from my SM-G360H using XDA Labs
wow amazing you are sooo fast....i install this when it is stable and bugs free.......you are amazing bro #doesntexits
Hi, works on G360M? Thanks
Camera not work.
Sent from my SM-G360H with cm13 using*XDA-Developers mobile app
poriya.219 said:
Camera not work.View attachment 3797504
Sent from my SM-G360H with cm13 using*XDA-Developers mobile app
Click to expand...
Click to collapse
Unlock your screen first, then reopen camera app
LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOSdoes still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial LineageOS 13.0 builds for v2awifi (SM-T900). The following will not be supported here:
Custom kernels
Mods
Xposed
Do not ask for ETAs. If you do, I will ignore you and your post.
SEANDROID ERROR
If you see a message at boot about Recovery or Kernel is not SEANDROID Enforcing, you can ignore it. This is just telling you that you are not running Samsung stock software. It has no effect on recovery or the ROM itself nor related to either.
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Bootloader Information
You need to make sure you have a Lollipop bootloader installed or else your device won't boot. Here you can go grab the latest bootloader and odin and flash it in download mode. Read all the steps before you do this.
Make sure you have a full backup because just in case you something fails.
Here are the steps to flash this via ODIN:
Make sure you have a full backup because just in case you something fails. Here are the steps to flash this via ODIN.
Reboot your tablet into download mode. Do this by first switching off the phone, then pressing and holding the volume down + home button together and then pressing the power button. Press volume up button to enter download mode.
Open ODIN on your computer. You?ll see the ID:COM box turning yellow with a COM port number upon successful connection with the tablet.
In ODIN click the BL button, select the bootloader firmware. It's a tar file.
Make sure Auto Reboot & F. Reset Time options are selected in ODIN
Click on the start button. When the process is completed your phone will reboot.
Installation
Download the zip(s)
Install a compatible Recovery (This will not work with the P900 recovery)
--1.*I have built a new version of TWRP with the MM kernel. MTP, Vibations, ADB now work and there are performance increases. The rom will need to allow v2awifi naming for flashing in recovery. Link
Perform a nandroid backup of your current ROM (optional)
Wipe data/factory reset
Flash LineageOS
Install the Google Apps addon package (Optional)
Reboot
Issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs or it didn't happen! You can use this: Syslog App
Downloads
Nightlies
Latest Nightly Date 12/23/16
Device Builds
Google Apps
http://opengapps.org/ - Thanks to the OpenGapps team!
Issues
Lower than stock audio volumes
MHL out to TV not working
The LineageOS team would like to thank everyone involved in helping with testing, coding, debugging, & documentation.
Source:
Kernel: Link
Device Tree: Link
Credits
@Valera1978 Initial device tree
@UpInTheAir for his kernel magic and misc fixes
@chhaggerty, @tbjr50 and @titidu3701 for their testing efforts
Exynos5420 Dev Team ( @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart )
XDA: DevDB Information
[6.0.x|SM-T900| Unofficial LineageOS 13.0 (v2awifi), ROM for the Samsung Galaxy Tab Pro 12.2
Version Information
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Status: Stable
Created 2016-10-01
Last Updated 2016 -12-23
Kernel Info:
M Kernel base from the Galaxy Tab S
M GPU driver from Galaxy Tab S
CPU Voltage Control
CPU OverClock/UnderClock (Up to 2.1GHZ)
MIF/INT Voltage Control
UKSM instead of KSM
Added the following IO Schedulers: fifo, fiops, sioplus, tripndroid, vr, zen, bfq (Default)
Full f2fs support updated off the mainline (Stock cm kernel has limited support)
Modified Thermal Throttling temperatures for all devices so hopefully they won't get as hot
Exynos thermal exposed to sysfs
Android Logger disabled by default can be enabled over sysfs
WQ power efficient workqueues (Still need to apply in more places)
Frandom Support
Readahead bumped to 256 from 128
Currently Disabled:
GPU Voltage Control/GPU OverClock/UnderClock (Needs to be rewritten for the M driver)
Awesome!
Thank you very much Tom!
Thank you! I would like to report that vibration isn't working. Other than that, everything works great.
c19932 said:
Thank you! I would like to report that vibration isn't working. Other than that, everything works great.
Click to expand...
Click to collapse
I will look into this. I am fairly confident I know what the fix is. Thanks for the feedback.
Hmmm...
I did wipe cache/dalvik cache/system and data with TWRP 2.8.7.0
and installed your cm-13.0-20161001-UNOFFICIAL-v2awifi.zip along with the open_gapps-arm-6.0-pico-20160925.zip (which I got as .ZIP for/from my Nexus 10)
After installing wiping cache/dalvik cache again and reboot system - but then after the SM-T900 Logo the screen is only blank.
No boot animation and no other sign that it will do something.
I could go to TWRP via Power+VolUp+Menue....
Do you got an Idea what went wrong?
[EDIT] also only the cm-13.0-20161001-UNOFFICIAL-v2awifi.zip without Open GApps gives me a black screen.
For now Iam back on CM 12.1 from the 09.07. and pico Open GApps from today.
Why was the SM-T900 files formerly named v2wifixx and now v2awifi? Could this be a problem for me?
guidol, try updating your bootloader, as per the OP.
TP, thanks much for your work on Tab/Note Pro 12.2.
gorgthetroll said:
guidol, try updating your bootloader, as per the OP.
TP, thanks much for your work on Tab/Note Pro 12.2.
Click to expand...
Click to collapse
How to do that? I have the same issue. Thnx
gorgthetroll said:
guidol, try updating your bootloader, as per the OP.
Click to expand...
Click to collapse
Thanks @gorgthetroll
Now it works - didnt read the part before the installtion carefully enough
@kutzman: read the part above the part of the installtion instruction:
Bootloader Information
You need to make sure you have a Lollipop bootloader installed or else your device won't boot.
I did this Bootloader-Part with Odin (Ok, on my device I has it to fo 2 times and 2 times it told me OK, but it did boot with a read Message about the Kernel in the 2nd try.
Now - after the seond try of the BootLoader-Flash my SM-T900 did boot - so I updated the TWRP via Flashify to the latest version (3.0.2.0) - but for that you have to enable root access in the developer options of CM13
thompatry said:
I will look into this. I am fairly confident I know what the fix is. Thanks for the feedback.
Click to expand...
Click to collapse
Does look great the first version of the CM13 for the SM-T900 :good:
Sadly I can confirm the missing vibration.
But as I did promise you - I donated another $30 for the "working" version of CM13 :laugh:
I hope this will encourage your development on the SM-T900-Builds! :angel:
guidol said:
Does look great the first version of the CM13 for the SM-T900 :good:
Sadly I can confirm the missing vibration.
But as I did promise you - I donated another $30 for the "working" version of CM13 :laugh:
I hope this will encourage your development on the SM-T900-Builds! :angel:
Click to expand...
Click to collapse
Thanks a lot to Guidol for being the most generous "facilitator", helping keep our great Tom in great spirit
Glad to see this rom!
Thank you for a working MM build for this amazing tablet, which I lost hope for any development. I appreciate all the hard work you put into getting this working!
I am having issues with the Play Store hanging at times and the File Manager not showing up properly and slowing down the device significantly
Getting a lot of issues regarding "Package Installer"
No Xposed installed*
Edit: tried multiple file managers from the Play Store and each have problems. No way to view files
Neekeet said:
Glad to see this rom!
Thank you for a working MM build for this amazing tablet, which I lost hope for any development. I appreciate all the hard work you put into getting this working!
I am having issues with the Play Store hanging at times and the File Manager not showing up properly and slowing down the device significantly
Getting a lot of issues regarding "Package Installer"
No Xposed installed*
Edit: tried multiple file managers from the Play Store and each have problems. No way to view files
Click to expand...
Click to collapse
Make sure you did a clean install, as mentioned in the OP's original message, and use an up-to-date OpenGapps package (for ARM, 6.0).
Thanks,
Eric
vochong said:
Make sure you did a clean install, as mentioned in the OP's original message, and use an up-to-date OpenGapps package (for ARM, 6.0).
Thanks,
Eric
Click to expand...
Click to collapse
Thanks for the reply
I have a clean installation and the exact same Gapps package installed.
Going to reflash and see keep an eye out for better results
Anyone else notice their tablet getting really hot? near the camera front and back.
Edit: Just reflashed using the Nano Gapps package and everything seems to be working great! will update if i run into anything. I had issues using the Pico version and wonder if that is suspect to the issues I was having. Any ideas?
Neekeet said:
Thanks for the reply
I have a clean installation and the exact same Gapps package installed.
Going to reflash and see keep an eye out for better results
Anyone else notice their tablet getting really hot? near the camera front and back.
Edit: Just reflashed using the Nano Gapps package and everything seems to be working great! will update if i run into anything. I had issues using the Pico version and wonder if that is suspect to the issues I was having. Any ideas?
Click to expand...
Click to collapse
Since the system partition in SM-T900 is quite large, I've always installed the STOCK package so it would remove most of the built-in stock/AOSP apps/tools and replace them with Google ones.
Also, with the STOCK package, I can still have access to useful Google apps even after a configuration reset, and without Google login (to download apps from Google PlayStore.)
Thanks,
Eric
Neekeet said:
Edit: tried multiple file managers from the Play Store and each have problems. No way to view files
Click to expand...
Click to collapse
I didnt got a problem with the EFS Explorer.
But for some access-methods you have to grant access-rights if the app/CM13 did ask.
And I got root-access enabled in the developer options.
---------- Post added at 06:25 PM ---------- Previous post was at 06:16 PM ----------
Neekeet said:
Edit: Just reflashed using the Nano Gapps package and everything seems to be working great! will update if i run into anything. I had issues using the Pico version and wonder if that is suspect to the issues I was having. Any ideas?
Click to expand...
Click to collapse
I didnt got any Problems with the pico Open GApps.
But you have to install something like GMail afterwards to get the actual Google/Playstore Services as Update.
After that I only do install the Google-Appsvthat I want.
Love this feature not having some odd G-Services in the Background or in the System-Partition.
(and I also use the pico on my Nexus 10 with CM13 because there is the /system only 800MB in size)
---------- Post added at 06:51 PM ---------- Previous post was at 06:25 PM ----------
Neekeet said:
Anyone else notice their tablet getting really hot? near the camera front and back.
Click to expand...
Click to collapse
on normal usage I didnt noticed the tablet being really hot.
Which apps do you use at this time? games with much graphics?
Tom did write about the voltage-selector of the gfx-card(?) that the voltage cant set down for underclocking or higher for overclocking....or somthing like this....moment I will copy the part...
"
Currently Disabled:
GPU Voltage Control/GPU OverClock/UnderClock (Needs to be rewritten for the M driver)
"
Dont know if your tablet will be hot about this disabled setting....
Everything is running fine now! thanks everyone
Love having MM on this tablet finally haha
Anyone's tablet feel a bit sluggish? it may be difficult to replicate but bringing down notifications seems to have some lag to it
Neekeet said:
Anyone's tablet feel a bit sluggish? it may be difficult to replicate but bringing down notifications seems to have some lag to it
Click to expand...
Click to collapse
for its fast as before with CM12....the Notifications werent for me the fastest ones....but Iam happy wirh this first build.
guidol said:
for its fast as before with CM12....the Notifications werent for me the fastest ones....but Iam happy wirh this first build.
Click to expand...
Click to collapse
Try to change the speed for windows animations, and the transition and animator duration. You can do that in developer options half way xown deist under drawing. Change the settings from window animation s ale, transition animation scale and animator duration scale from 1 to 0.5. See attached screenshot
pandoraman said:
Try to change the speed for windows animations, and the transition and animator duration. You can do that in developer options half way xown deist under drawing. Change the settings from window animation s ale, transition animation scale and animator duration scale from 1 to 0.5. See attached screenshot
Click to expand...
Click to collapse
I did try these settings - seems to be much better - many thanks
Code:
/*
** Your warranty is now void.
**
** We are not responsible for bricked devices, dead SD cards,
** thermonuclear war, or you getting fired because the alarm app failed. Please
** do some research if you have any concerns about features included in this ROM
** before flashing it! YOU are choosing to make these modifications, and if
** you point the finger at us for messing up your device, we will laugh at you.
**
**/
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
IMPORTANT INFORMATION
Root is not included by default on LineageOS 14.1. You need to install an add-on via recovery. You only need to install this once. You can download the SU add-on here
After installation go to Settings>Developer Options>Root access and set to Apps only or Apps and ADB.
LineageOS comes with LineageOS Recovery by default, if you don't like it (like me ) you can flash alternative recoveries using IsoRec. You really need 1GB /system partition. The smallest build-configuration is larger than 512mb. You can use ODIN, but you can also use Lanchon's REPIT.
If you're interested in BLN, check this thread for a complete support of this feature.
If you're interested to go to emulated-storage, check this thread.
Official LineageOS Wiki: http://wiki.lineageos.org/
Changelog: https://www.lineageoslog.com/14.1/i9100
LineageOS official nightly builds
https://download.lineageos.org/i9100
Google Apps:
http://opengapps.org/
XDA:DevDB Information
Lineage OS 14.1, ROM for the Samsung Galaxy S II
Contributors
rINanDO, lysergic acid, serenitys
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Based On: LineageOS
Version Information
Status: Nightly
Created 2017-02-13
Last Updated 2017-04-20
Reserved
gapps link dead
[i9100] Useful fixes for LineageOS 14.1 [7.1.2]
[i9100] Useful fixes for LineageOS 14.1 [7.1.2]
I am very glad that you are here!
It may be helpful to you:
Scripts moved here ...
BatyuS said:
gapps link dead
Click to expand...
Click to collapse
I think ist is just a mistake and should mean "open gapps"
http://opengapps.org/
Sent from my ME173X using XDA-Developers Legacy app
In General forum? Why not in Original Android Development?
Which GApps exactly?
Just to prevent from questions like "which GApps architecture and version do I need?"
This link will show you the minimal OpenGapps variant independently of your last visits (cookies never forget you)
http://opengapps.org/?download=false&arch=arm&api=7.1&variant=pico
(so only the variant needs to be changed if you prefer bigger packages)
Edit: Check this post to see how to create a customizable config that allows you to control the OpenGApps installer, e.g. to downsize bigger GApps packages for flashing Pixel Launcher while skipping other components you don't want. Included a sample config-file there as well.
I have questions:
FM Radio?
upgrade of CM 13?
TWRP emuled storage installation and new repit procedure?
from cm-13.0-20161218-nightly to lineageOS 14.1
shkedov said:
In General forum? Why not in Original Android Development?
Click to expand...
Click to collapse
Hi everyone, I am a low-average level user so I wonder if there is a step-by-step guide to upgrade my I9100-international from cm13 to lineageOS 14.1
bepcan said:
Hi everyone, I am a low-average level user so I wonder if there is a step-by-step guide to upgrade my I9100-international from cm13 to lineageOS 14.1
Click to expand...
Click to collapse
Only if you're coming from cm13 without losing data (i.e. your apps installed). Otherwise - wipe clean and install the recent nightly only (and gapps if you wish).
-3. Get a good cup of coffee.
-2. You must have at least 1GB partition of /system. If not, first repartition your storage (see OP) and then come back to here to proceed.
-1. Proceed to oficial download site: "https://download.lineageos.org/i9100 for the current build, https://www.androidfilehost.com/?w=files&flid=154035 for the experimental build, thanks to @ale5000 for uploading this for us.
0. Download the latest 2 following files: Nightly and Experimental (as for now lineage-14.1-20170208-experimental-i9100-signed.zip and lineage-14.1-20170208-nightly-i9100-signed.zip). Verify their md5 checksum to prevent errors, it is vital to do so.
Optional - download gapps from [url]http://opengapps.org/[/URL] for android 7.1, ARM (the nano is fine for me).
1. Boot into recovery. Install the "experimental" zip (Dirty flash! No wipes!).
1.5. You can reboot now into system, just to get a systemUI crash errors and a blank screen. Pretty useless. If you got to here then force reboot to recovery and proceed to step 2.
2. Reboot into recovery! Install the "Nightly" zip and gapps.
3. Wipe cache and boot to system.
There you go kiddo'.
Good luck! :fingers-crossed:
Whats Working Nd Not Working Tell Pls
rowdykumar786 said:
Whats Working Nd Not Working Tell Pls
Click to expand...
Click to collapse
It is relatively very stable to me, most is working! Phone and RIL, audio, GPS, BT, and a lot more!
I believe battery has improved too. Performance is very well.
This is my only phone, I rely on this phone, and on my daily use no problems so far! And yeah this ROM rocks!:good:
Go for it dude!
I experience a problem with libUMP making my own build. Is this : https://forum.xda-developers.com/showthread.php?p=69920779 still a working solution?
Verstuurd vanaf mijn GT-P7500 met Tapatalk
shkedov said:
Without losing data (i.e. your apps installed).
-3. Get a good cup of coffee.
-2. You must have at least 1GB partition of /system. If not, first repartition your storage (see OP) and then come back to here to proceed.
-1. Go to https://download.lineageos.org/i9100.
0. Download the latest 2 following files: Nightly and Experimental (as for now lineage-14.1-20170208-experimental-i9100-signed.zip and lineage-14.1-20170208-nightly-i9100-signed.zip). Verify their md5 checksum to prevent errors, it is vital to do so.
Optional - download gapps from http://opengapps.org/ for android 7.1, ARM (the nano is fine for me).
1. Boot into recovery. Install the "experimental" zip (Dirty flash! No wipes!).
1.5. You can reboot now into system, just to get a systemUI crash errors and a blank screen. Pretty useless. If you got to here then force reboot to recovery and proceed to step 2.
2. Reboot into recovery! Install the "Nightly" zip and gapps.
3. Wipe cache and boot to system.
There you go kiddo'.
Good luck! :fingers-crossed:
Click to expand...
Click to collapse
Do you don't include TWRP emu 3.03 https://forum.xda-developers.com/showpost.php?p=71009597&postcount=88 Interesting
Yes I would like to know upgrade path to official using twrp3.0.3 for emulated storage too please
todonormal said:
Do you don't include TWRP emu 3.03 https://forum.xda-developers.com/showpost.php?p=71009597&postcount=88 Interesting
Click to expand...
Click to collapse
People asked for a simple migrating guide from CM13 to LOS14.1, if someone isn't heading to switch to emulated I don't see a reason to send people to install an emu-recovery while they don't wish to.
It should be a decision for users.
Therefore I don't see a reason to include special addtional options besides the basics (exp+nightly+gapps). Whoever wants to expand more should simply read the OP and the links.
As for myself yes, I'm on emu now.
shkedov said:
People asked for a simple migrating guide from CM13 to LOS14.1, if someone isn't heading to switch to emulated I don't see a reason to send people to install an emu-recovery while they don't wish to.
It should be a decision for users.
Therefore I don't see a reason to include special addtional options besides the basics (exp+nightly+gapps). Whoever wants to expand more should simply read the OP and the links.
As for myself yes, I'm on emu now.
Click to expand...
Click to collapse
Could we have a short video to show how to switch to emulated storage?
Regards.
New build lineage-14.1-20170213-nightly-i9100-signed.zip is up
https://www.lineageoslog.com/14.1/i9100
laptopu said:
Yes I would like to know upgrade path to official using twrp3.0.3 for emulated storage too please
Click to expand...
Click to collapse
Hmm, because this phone is my main and only phone, I won't be able to test that soon (reverting recovery and ROM to cm13, reverting repartitioning too, then starting to trial and error).
But I believe that the safest way is to start from the moving to LOS14.1 - flashing the experimental and nightly first, as I guided. Then later flash emu-twrp recovery and proceed with rINanDO's instructions.
I'm afraid doing opposite (emu'ing first and then flash exp+nightly) might not work since Lanchon and the guys warned us that this emu-kernel might not work even with cm13 and maybe even affect it! Maybe repiting manually with Lanchon's magic REPIT would do, then migrate ROM, then change to new emu-recovery.
PLEASE:
- don't direct-link to recoveries that will brick your phone if installed too early.
- read the linked threads in the opening posts to understand the complexity of any of the changes
- if understood the consequences and you still want to do them all at once: know your limits
- if still feeling comfortable until here: go ahead *but do it in the correct order* or your phone will bootloop as all the newer test-recoveries were built with a Nougat ramdrive and thus will very very likely bootloop on your phone if installed on non-Nougat ROMs!
So my advice for your own safety: stay in your lane and read everything first.
EDIT: And by the way: please keep emulated storage discussions in the appropriate thread until it is officially tested and documented to be kind of noob-proof.