I didn't see anybody with a system pull of the Verizon model yet so I went ahead and did it for you guys. Always downloaded ROMs for my G2 so I wanted to try to give back to the community with this. Hopefully somebody can put it to good use.
http://bit.ly/1mal7PE
Is this where they get a .tot from???
Related
Disclaimer​
Code:
Neither Me Nor XDA Are Responsible If You Lose Your Job/Break Your Device.
Your Warranty Is Now Void
Downloads :
WIP
Instructions :
Extract The .rar
Open The Setup File And Install LG Flashtool
Right Click On The Shortcut Created On Your Desktop And Open File Location.
Copy The .dll Files From The DLL Folder To The Previously Opened Location And Replace The .dll In Flash Tool Folder If Any.
Open The Flashtool,Select The .dll Then The .tot/.bin File And You Are Ready To Flash The Firmware,Connect The Phone In Download Mode When Asked.
Note :
I Don't Know Whether It Works For N4 Converted Devices.I Had Successfully Flashed Stock .20 .bin File With It.But I Suggest To Use This Only When LGNPST Does Not Work/Fails To Flash The FW As For Me.Please Don't Perform Unwanted Experiments With Your Device Or It Will Result In A Hard Brick.
This Guide Was Originally Created By madmack @ Optimus G Pro Section So Thanks To Him.
I was Searching For The .dll File For Our Device And Found It So Decided To Create A Thread.And Those Who Are Thinking That The Required .dll Is The Same That We Use For LGNPST,NO,This Is A Different .dll
It Did Not Ask For Unlock Code When I Flashed The Stock JB FW.But As Posted By madmack there is A Possibility That It Can Ask For Your Unlock Code.So Proceed With Caution.
Again This Is A Alternate To LGNPST And Only I Have Successfully Flashed The Stock FW.It Is Recommended That Unless It Is Tested By 4-5 Experienced Users,Its A No Go For Noobs/New Users.
And Be Advised That This Process Will Wipe Your Internal Storage.
Enjoy!
Regards,
acervenky,
XPT
reserved
Thanks for sharing.
Edit: There are many more things to do in his (madmack) thread... Did u follow them all? Or for us we do not need all those steps? Let us know before someone bricks.. I use LGNPST but if anyone tries this.. at least they have a better understanding. thanks again for sharing.
just a heads up.. TeenyBin does not work in LG Flash. There are extra CRC checks which I haven't been able to bypass yet. This may change in the future.
also, not sure if this version of LG Flash is same as the newer one I use but I have to set the COM port to 40+ for LG flash to see my device.. altho maybe I'm missing something. I have to go into windows device manager and manually change the COM port used for the phone ( its in properties ).
LG Flash is no better or worse than LGNPST in my opinion. On the plus side.. there's no dll to register... and options are good
Googler_1976 said:
Thanks for sharing.
Edit: There are many more things to do in his (madmack) thread... Did u follow them all? Or for us we do not need all those steps? Let us know before someone bricks.. I use LGNPST but if anyone tries this.. at least they have a better understanding. thanks again for sharing.
Click to expand...
Click to collapse
Changed The Status To WIP.
Will Search For The Info And Update The Thread Soon
Regards,
acervenky,
XPT
autoprime said:
just a heads up.. TeenyBin does not work in LG Flash. There are extra CRC checks which I haven't been able to bypass yet. This may change in the future.
also, not sure if this version of LG Flash is same as the newer one I use but I have to set the COM port to 40+ for LG flash to see my device.. altho maybe I'm missing something. I have to go into windows device manager and manually change the COM port used for the phone ( its in properties ).
LG Flash is no better or worse than LGNPST in my opinion. On the plus side.. there's no dll to register... and options are good
Click to expand...
Click to collapse
Yup.
Regards,
acervenky,
XPT
Download link is missing.
I've try to found the download link for the Lg Flash tool on this page, but i haven't. Can you fix it or explain? Thanks anyway.
Which .TOT and .DLL files will you be providing? I need the .DLL and .TOT file for, of course, the AT&T Optimus G E-970 US version! I flashed my wifes phone cause it boot looped and the .TOT used was SUPPOSED to be this file but it is the Korean FW. Now my wifes phone will not update via OTA because it changed her IMEI number. I need to get her phone back to stock 4.1.2 US VERSION!
cougar214 said:
Which .TOT and .DLL files will you be providing? I need the .DLL and .TOT file for, of course, the AT&T Optimus G E-970 US version! I flashed my wifes phone cause it boot looped and the .TOT used was SUPPOSED to be this file but it is the Korean FW. Now my wifes phone will not update via OTA because it changed her IMEI number. I need to get her phone back to stock 4.1.2 US VERSION!
Click to expand...
Click to collapse
Here is the file you need to get her phone back to STOCK U.S: http://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip I'm not sure on the DLL file, I use LGNPST so not sure if they are the same but attached it also just incase you can use it.. stock firmware file above is a .tot file so if you need to you can just change it to .bin if you need to.
Thank you blake but no. That is the fw file that turned her phone Korean. So may people are under the impression this is the stock US fw but it isn't. I even had another person here check their phone and his too in fact says "Lg Electronics Korea".
cougar214 said:
Thank you blake but no. That is the fw file that turned her phone Korean. So may people are under the impression this is the stock US fw but it isn't. I even had another person here check their phone and his too in fact says "Lg Electronics Korea".
Click to expand...
Click to collapse
Where do you go check to see if its U.S or Korean?
All settings--> about phone -->phone Identity.
It's under settings-->about phone-->phone identity.
I had another person tell me that's normal because it's only the "manufacturer" info. Which im told this phone is manufactured in Korea. I don't know. All I do know is everyone is saying this is the stock fw for this phone but my wifes phone has changed. The start up screen is different and so is the shut down screen. Example, when her phone would shut down, she would get the AT&T logo and sound. After flashing this file she gets the blue circle and no sound. I do know that 4.1.2 is different depending on the region the phone is in. I don't know anything else that would explain this. Maybe this FW file WAS a different region but it was stripped out and converted somehow?
cougar214 said:
It's under settings-->about phone-->phone identity.
I had another person tell me that's normal because it's only the "manufacturer" info. Which im told this phone is manufactured in Korea. I don't know. All I do know is everyone is saying this is the stock fw for this phone but my wifes phone has changed. The start up screen is different and so is the shut down screen. Example, when her phone would shut down, she would get the AT&T logo and sound. After flashing this file she gets the blue circle and no sound. I do know that 4.1.2 is different depending on the region the phone is in. I don't know anything else that would explain this. Maybe this FW file WAS a different region but it was stripped out and converted somehow?
Click to expand...
Click to collapse
After a little checking I found out the same thing, It was normal as it was the place of manufacturer. I'm not sure what the problem might be but as far as I know that's the stock firmware for the phone.. You might try this one out http://www.androidfilehost.com/?fid=22901594685177912 you just boot into recovery do the normal wipes and flash through recovery, its supposed to be stock except for being rooted and as far as I know those are the only two stock files floating around for the phone...
Thanks Blake. Can you confirm for me that this phone will NOT get OTA updates if it's changed in any way, including rooting? It's what I was told by someone else. If that's the case then I guess there really is nothing wrong with the phone except those weird unexplained small changes.
I've got all the correct files download and I made it so far as to try to actually flash the phone, but it fails and gives me a wrong model number message because it's detecting my phone as a E960 (it's an E970). Any ideas? I had installed the latest CM11 ROM over some encrypted data and now I'm locked out (old encryption PIN doesn't work) and I can't restore it to stock.
can someone help me with a .tot or .bin stock for lg l70 d320n? cuz i"ve looked for it everywhere but couldn"t find anything
need help bad.
i got this phone from a friend and it originally had cm11 on it. the phone in question is the lg e970. i wanted to get back to stock. so i downloaded the correct firmware and added it to my external sd card. using twrp before i proceeded to wipe the phone via twrp. when it was finished i restarted the phone into twrp and went to install the stock firmware and i could not find my exsd card. twrp does not recognize it at all. so now im stuck with a phone with no os on it. i can ge into twrp and download mode, and when i just boot the phone it goes to lg logo and stays there. i need help in trying to figure out how to get stock firmware back on phone. i am used to samsung phones and odin. so im a noob when it comes to lg. i am very tech savy when it comes to computers. plzzzzzz any help would be great!!!!!!!! and appreciated
I can not add .tot file in LG flash tool
I have unrooted my lg g3 before on another computer. But i can't add the .tot file with my new computer. I am doing everything the same.
Does anyone have any ideas?
My phone was soft-bricked but I managed to install Cyanogenmod on it, which is fine, but I can't do a network unlock and looking around it seems I really need the stock Gingerbread 2.3.6 ROM installed.
I found a kdz file but 1) I have no idea if it's good 2) All the tools I could find to flash a kdz image require Windows, and an XP VM doesn't see my phone on USB for some reason.
I came across this thread and would like to know what peoples' success rates are:
http://forum.xda-developers.com/showthread.php?t=2256583&nocache=1
One guy posted that it soft-bricked him.
Alternatives are at the moment hope that someone can link/make me a stock backup made with clockwordmod or see if I can get a cheap one on ebay and grab the image from that.
Unless you guys got some other ideas?
Thanks for any info
Hey guys. Bought an LG G3 off Amazon and turns out it had been put on BOOST network. I've re-imaged it first with LS990ZV4_04.51101.tot and also tried LS990ZVA_00.tot. I'm not making any progress getting the Sprint stuff back on. I get it booted up but it's now on the "LG" network and can't get it onto Sprint. No LTE, but can get wifi going so it does some downloads.
I guess I'm doing the wrong stock rom though this is what I came up with after researching. Can someone please point me to the right stock rom for the Sprint LG G3 LS990? I'm trying to get it back onto their network. My next attempt is/was going to be putting Cyanogen on it and seeing if that gets me anywhere closer. I do have another LG G3 but I'm not familiar with backing up it's rom for transfer (if that's even possible).
Please help?
Running 5.01 software and unable to root (tried several including one listed as Newest root method v03). Will pursue trying to root as possible solution.
Dagroth said:
Running 5.01 software and unable to root (tried several including one listed as Newest root method v03). Will pursue trying to root as possible solution.
Click to expand...
Click to collapse
In the FAQ for root/unlock info.
As for getting back to Sprint. You will need your MSL and do dialer code ##RTN#. You can find that info stickied in General.
You'll need to stay with stock to fix everything before going to CM/AOSP.
engine95 said:
In the FAQ for root/unlock info.
As for getting back to Sprint. You will need your MSL and do dialer code ##RTN#. You can find that info stickied in General.
You'll need to stay with stock to fix everything before going to CM/AOSP.
Click to expand...
Click to collapse
Thanks for the pointer!
Dagroth said:
Hey guys. Bought an LG G3 off Amazon and turns out it had been put on BOOST network. I've re-imaged it first with LS990ZV4_04.51101.tot and also tried LS990ZVA_00.tot. I'm not making any progress getting the Sprint stuff back on. I get it booted up but it's now on the "LG" network and can't get it onto Sprint. No LTE, but can get wifi going so it does some downloads.
I guess I'm doing the wrong stock rom though this is what I came up with after researching. Can someone please point me to the right stock rom for the Sprint LG G3 LS990? I'm trying to get it back onto their network. My next attempt is/was going to be putting Cyanogen on it and seeing if that gets me anywhere closer. I do have another LG G3 but I'm not familiar with backing up it's rom for transfer (if that's even possible).
Please help?
Click to expand...
Click to collapse
Did you ever get this fixed? I have the same situation after going back to stock using the .tot method. It showed I was on the LG network, so I did the ##RTN# procedure, it reset everything and now it shows Im on the Sprint network but still no 4G/LTE, it shows im my mobile network type as "EvDo-rev.A" I get 3G but no 4G, any help is appreciated.
hello i have a zte z820 i found on the ground ive waited a week and no one has called it or locked it. it has a pattern so i couldant find any way to give it back to owner.
so i would like to use it as a media phone
so unaware of FRP and kill switch because all the other phones ive reset never had this
i reset this phone and when it booted it wanted the google account from the previous owner.
two questions...
1. if i could find a stock rom or stock backup(the stock recovery has a backup restore feature?) could i just restore from that and that would wipe the system directory and i could continue?
2. can someone backup their zte z820 metro pcs and send me the link?
or can soemone assist be me getting around frp
Let me know if you got this done.... I too need stock rom
yeah i dont believe anyone is willing to help with this issue or device in general. luckily the phone is cheap enough to not be hurt by getting a new phone instead
if someone can pull firmware from working device i can buy one just for that.....
i also have this phone with bootloop problem ... i also need its firmware ...
I got an update I have ignored for weeks and two days ago I noticed my message won't open so I decided to update . that was the end of this phone. I have been looking for firmware, what did I do to zte
Hi! thanks XDA people. I believe someone in this forum should be able to get us the stock ROM just so we can fix our devices and quit complaining. This place is largely our best hope. Mine is ZTE Z820 OBSIDIAN
Hi I want to know if anyone knows how too root the LG G Pad X 2 10.1 UK750 model and if not then if I can get a hold of a developer who can help. Thank You
Bump-I want to root this thing too, it's a pretty good pad if I could only get the LG crap off of it
Just bought one at US Cellular
I would also like to know this. Seems like a decent tablet for the price I got it
I can supply a system dump I believe, if it will help. If anyone finds anything- please, post it here. Having what few scraps we can find in one spot has to help.
We have to know the bootloader can be unlocked and are all fastboot commands stay intact.
Here's a system dump if that'll help at all.
mingkee said:
We have to know the bootloader can be unlocked and are all fastboot commands stay intact.
Click to expand...
Click to collapse
Here's a system dump. ADB works, can't get into fastboot. I have developer options enabled and I CAN enable OEM unlock...but of course LG isn't allowing unlocking on their dev site.
mingkee said:
We have to know the bootloader can be unlocked and are all fastboot commands stay intact.
Click to expand...
Click to collapse
I can get into download mode, and adb works. Fastboot doesn't seem to be there. I suppose it might be possible to factory sign a modified .kdz? I don't know enough to know if that's possible, but I'll test it if you try and make one
LG Gpad X II 10.1 REALLY want to ROOT!!
Ok, more stuff. Here's a stock boot image and a patched boot image I extracted with magisk. Can anyone figure out a way to put these together and sign it such that it will install? I really want to root this thing. I am willing to try just about anything that stands a chance of working. If you're a dev and willing to at least give it a try, let me know and I'm ready to go at it. If I brick it trying I'm not going to be worried about it-it's nearly useless to me without root.
I notice the stock .Marshmallow .kdz is out in the world now...is there any way to factory sign a modified .kdz and install that, maybe?
wyvernwaddell said:
Ok, more stuff. Here's a stock boot image and a patched boot image I extracted with magisk. Can anyone figure out a way to put these together and sign it such that it will install? I really want to root this thing. I am willing to try just about anything that stands a chance of working. If you're a dev and willing to at least give it a try, let me know and I'm ready to go at it. If I brick it trying I'm not going to be worried about it-it's nearly useless to me without root.
I notice the stock .Marshmallow .kdz is out in the world now...is there any way to factory sign a modified .kdz and install that, maybe?
Click to expand...
Click to collapse
The Android 6.0.1 Build is MXB48T" the same android build as the Pixel C, maybe you can make something from the Pixel C.
Hiya!
I'm a decent bugtester, but definitely not a Developer..I'd be more than happy to bugtest anything installable if someone can come up with it. I did find I can get into EDL mode..but have no idea how to work with it.
Also gonna bump this, I don't even need permanent root or anything like that. I only want to change one line in the build prop so that I can use all apps in dual window (persist.splitwindow.support_all), and setprop did not work.
I've sat over this device for hours at a time, trying every obscure one click root tool, method, and app, to no avail. Strange for a device with a 2016 security patch.
I will test anything you guys can find, regardless of brick potential. I need that split window goodness.