Warning on Motorola flip case - Droid Turbo 2 Accessories

I purchased a Motorola flip case from Verizon and at first I really loved it. But between the window and screen dust and dirt particles get trapped between the two and when the window rubs against the screen it will stuff up the screen really bad. I thought it needed cleaning so I started to clean it and realized it wouldn't come off. It was hard scuff marks. The dt2 screen is too soft. So if you use one or like it be sure to put a screen protector on first. Hopes this will help someone.

I'd suggest the glass protector regardless, the plastic screen can be replaced but it does scratch from regular usage.

Hi I got the official droid turbo 2 flip case for my UK moto x force, it doesn't seem to be working correctly, is there an apk I need to install to get it to function correctly? Can anyone please provide me with the apk if that is the case? Many thanks

Related

screen protector in the box?

Does it comes with screen protector in the box? Like Touch Pro..
Asking because I ordered one, until it comes from Hong Kong...
to have something on screen...
thx
yes there is, as is a soft protection bag.
there is but...
Yes there is a screen protector in the box but I heard that it is not the top quality... So you better buy a quality type like BRANDO ULTRA CLEAR Protector Plus.
I will by this type when I buy my HD! I used the same brand for my Qtek S200 for over a year and I'm very satisfied with it.
imee.h said:
Yes there is a screen protector in the box but I heard that it is not the top quality... So you better buy a quality type like BRANDO ULTRA CLEAR Protector Plus.
I will by this type when I buy my HD! I used the same brand for my Qtek S200 for over a year and I'm very satisfied with it.
Click to expand...
Click to collapse
I think the screen protector is not too bad, it is hard plastic not that rubbery stuff. It is certainly nothing like those cheap ones that you find in local shops and it covers the whole face of the phone, not just the screen. The cloth bag cover that comes with it is OK, but it is a bit thick. I found a black silicon cover that is made for the iPhone 3G, I made the hole bigger for the earphone plug and a new hole in the back for the camera. I saw this video of it on YouTube (not my video http://www.youtube.com/watch?v=xUOgFQ8dpzo . It isn't a perfect fit but it's pretty good until the official covers are available.
The hard plastic covers made for the iPhone won't fit the HD
My story: i snobbed the screen protector since i never used any in the last 10 years, and peeled it badly since i thought i would have never used it...but looking better to it, it was not too bad! then, I ordered two original replacement protectors from HTC, installed it VERY carefully....and now they are essentially invisible and you'd need time to realize that the screen protector is actually present....
So, refrain from excitement when you open the box!
I thought I'd read to steer clear of the protector in the box? You guys are saying to go ahead and put it on?
Screen protector
I put mine screen protector that came with phone and don't really notice it at all... The pouch is a little too tight for phone so i bought another one...
razor_amd said:
I put mine screen protector that came with phone and don't really notice it at all... The pouch is a little too tight for phone so i bought another one...
Click to expand...
Click to collapse
I agree about the original pouch. What are you using now (and where did you get in from)?
Thanks,
Noony said:
I agree about the original pouch. What are you using now (and where did you get in from)?
Thanks,
Click to expand...
Click to collapse
Well, i disagree.
I seem to be able to get the phone in it with minimun effort, seems that it expands after a little use, like new shoes or clothes...
my gf put on the screen protector that came with the phone.. and i guess shes good at it haha cuz we put it on with no bubbles.. no edges up.. no nothing. PERFECT. it looks great. dont even notice it. ive been using the pouch that came with it and i like it. works fine.. squeeze from the bottom to take it out and just hold it slightly firm on the sides to put it in.. pushing down from the 3.5mm jack so you dont accidentally turn on the screen again with the power button.. gets slightly easier after a bit .. dont be scared =P
Is the screen protector in the box the same as the ones sold on htcaccessorystore.com (and other places like expansys) :
HTC Touch HD Screen Protector SP P200 (2 Pieces) ??
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=173045
I managed to put on the original screen protector with little hassle but hate the quality. Hope martins ship their fast.
is there a need for screen protector at all. I mean can I damage thescreen with stylus or my fingers?
YES! and a good quality piece!
I had accidentally hit my kaiser screen with seat belt metal piece, thinking screen is damaged. Therefore, not willing to remove the film to face the reality. Only yesterday, after confirming my blackstone is configured and running well, I removed my Kaiser screen protector. The screen is good as new. The dent on the film is "high"! Thanks to the martin shield.
I know but I mean with stylus or fingers not other things?
Surfer_D said:
I know but I mean with stylus or fingers not other things?
Click to expand...
Click to collapse
Yes I'd also like to know if a screen protector is necessary, assuming yyou don't abuse it.
Also would a cheap one from ebay be any good, and if not why not?
tyronne1126 said:
no edges up..
Click to expand...
Click to collapse
Now how the hell you did that ? :< I re-applied it 150 times and i need to be like super precise on it not to go left or right even for 0.0001mm
hell yeah screen protectors are necessary!
the screen will mark over time with stylus use and of course anything that "accidentally" hits it that is hard will cause marks, and no matter how careful you are, accidents happen
ive got the packaged screen protector on and its not too bad but i have a martin fields one ready to go on instead once the htc one starts to wear
I tried multiple times to apply the protector and was always off by a hair by the time got to the bottom. When I finally got it on straight there was enough dust on under it that I got disgusted and peeled it off again. I didn't give up though and ordered the OEM screen protectors again (two to a pack) and this is how I finally installed it properly:
1. Wash your hands.
2. Wipe the phone screen clean of any dust and fingerprints.
2. Find as dust free an environment that you have.
3. Peel the top edge of the protector only then line up this up with the top of the phone.
4. Slowly apply to the protector to the phone while allowing the backing to peel off. Make sure you don't allow it to totally come off.
5. You will soon know if it's going to lay flat in the slightly recessed area of the phone screen. The protector is exactly the same size as the recessed area and there is no room for error.
6. If not, peel the protector off again while allowing the backing to reseat on the protector but not all the way to the top.
7. Reposition the top edge very slightly and repeat. It will probably take several tries to get it right. It took me about 6 times but it looks very good when done.
The replacement protectors are easier to apply because the backing is the same size as the protector so it's easier to align with the phone.
If you're careful to not touch the adhesive side of the protector and are lucky enough not to have any dust settle on it, the final result is indistinguishable from the unprotected phone surface.
I'm very curious. Does anybody know why HTC doesn't supply the machine with the screen protector already installed?

[Q] Factory applied screen protector?

Hi guys,
Is there a pre applied screen protector on the Tablet S? Looking closely at the corners of the screen to does look like it but I haven't found any confirmation of this. I have a scratch on my screen and would obviously like to fix that.
Note that it was exactly like this on my Sony Ericsson Xperia arc where I just removed the pre fit screen protector and found a perfectly unscathed glass screen below. SE however declares that they apply a "shatter proof film" to avoid cracked glass displays
Can anyone confirm for the Tablet S? Has anyone tried to remove it?
Thx
Mine never came with one lol
Are you sure? Looks exactly like my phone. You would never have guessed it is there and you need to look really closely.
I bought one last week, and I can confirm there is a screen protector on the Tablet. I bought it in The Netherlands
- SnEAky
Yes, there is indeed one applied from factory, just as there was with my Xperia Play. I did go ahead and add an anti-glare protector on top of mine so I essentially have two protectors on mind now, but I think for most the hassle and frustration of trying to apply a protector without dust/air bubbles etc, simply isn't worth it as you are already protected.
There is a screen protector on the Tablet S just like most of the Android phones from SonyEricsson.
It is quite different from what you can get in the market. The screen protector from the factory is to prevent cracks or breaks. The screen protectors selling on ebay or whatever amazon are for anti-scatching.
I was recommended not to removed the factory screen protector on my X10 once before but I did it. After removing the screen protector, the glass is quite fragile like iphone's. It ends up with cracks at the edge when I dropped my phone from my pocket. Because I was sitting at that moment, the height is approx. 30cm.
Sorry for my bad english.
Mine has a screen protector. It's a 16gb one from the US.
Thanks, looks like the scratch is just on the screen protector then which is good news
On Xperia phones we know it's fine to remove (providing you don't drop it) but would like to hear from someone with a Tablet S. The my scratches aren't big enough to motivate the increased risk of breaking the glass, yet at least..
I have scratch on my screen already, so worry... now since everyone said there is a screen protector I feel better...
It seems redundant to put another screen protector over the factory installed. I can tell there is one on mine since it feels like plastic when I touch the keyboard...Is everyone still putting the sony screen protector over the factory installed?
I did, but it was a b*tch to do so with all the bubbles. But I managed to get them all, but one. See no reason why not use an extra screen-protection when you got one.
Has anyone managed to get this screen protector off the screen? It's a terrible dust magnet so i want to get rid of it and put on the "other" sony one.
daClaus said:
Has anyone managed to get this screen protector off the screen? It's a terrible dust magnet so i want to get rid of it and put on the "other" sony one.
Click to expand...
Click to collapse
I used a fine kitchen knife and peeled it of gently. I did it on the sony lcd-protection. Not the pre-installed one.
kryddan said:
I used a fine kitchen knife and peeled it of gently. I did it on the sony lcd-protection. Not the pre-installed one.
Click to expand...
Click to collapse
Have you found that the sony screen protector has reduced screen sensitivity... especially when typing?
can't said that I had. Did not play around with the screen before i placed the protection over it. It feels fine and responsive. The only thing is that it gets a little harder when it's hot outside and your hands gets warm, but that goes for all touch-devices I guess.
ditto
the matte finish is worth any loss in sensitivity, its fine with the official sony extra cover on and the matte is a BIG diff.
In fact it was a major selling point for me IMO, saw it in store next to the samsung tabs and the glare was hilarious. It wasn't until I was checking the box contents that I realised that the matte finish was due to an extra cover, but since that was part of the deal I didn't care. I didn't realise that it would have any impact on touchscreen sensitivity (?), in my experience with other devices I've not seen such an effect.
I also bought the matte one and applied it over the "other" (since there seems to be no way to peel it of) screen protector. The matte finish is great, and the touch feeling is much better than before. The original screen felt sticky and kind of rubberish when swiping with the finger, the matte one feels more dry. Great improvement!
Didnt get one in the Netherlands, but myn Tablet was a Demo machine in a store
I bought the official Sony protector and I actually really don't like it. I got it on with no bubbles or dust, and the matte finish looks nice when you put it on and feels nice when swiping etc.
Unfortunately, in my case, the touch sensitivity took a steep dive and made swiping vertical lists, vertical combo boxes, etc a real pain to do. By far the worst thing I've found is that the official protector leaves horrid fingerprint marks all over the screen, which kind of ruins the Sony's lovely sleek and shiny looks.
I love my Tablet to pieces, but the official protector I bought here in Australia is truly dreadful.
Don't be a fool, leave the factory applied protector on. It would be like peeling the safety film off of your windshield on your car. There is no practical benefit from doing it.
Either buy a clear aftermarket one or the matte Sony one, but don't degrade your tablet. If you have kids, however, encase it in carbonite ASAP.

Screen Guard

Everyone here knows that Motorola droid razr has a gorilla glass, so do I really need to put a screen guard on the phone? Why or why not?
rahulwadhwani said:
Everyone here knows that Motorola droid razr has a gorilla glass, so do I really need to put a screen guard on the phone? Why or why not?
Click to expand...
Click to collapse
That is up to you. Gorilla glass can scratch and break like any other screen. I use them because its easier to replace a scratch on a $10 protector than to replace my phone because of a scratch.
Sent from my Droid Razr using Tapatalk
There was an article on yahoo testing the screen with & without protector. Keys didn't scratch either, and neither did pocket change. The two things the host tested were a nail file and then she ran a dremel across the screen. The nail file scratched the glass but not through the screen protector. The dremel results were the same. Some argue that the screen protector helps against drops but I'm not willing to test that one out.
I scratched my screen sometime on day one. its a hairline scratch and can't be felt but my eyes are drawn to it. It wasn't in a pocket with keys or change. I did have it the pocket of my khakis but the pockets were otherwise empty. I also put it face down on my couch a few times while I was transfering files to the SD card. Not sure how it got scratched but all I have to say is:
USE A SCREEN PROTECTOR OR YOU SCREEN WILL GET SCRATCHED. Mark my words.
I've had my RAZR for 5 months, I think. I finally managed to get my first hairline scratch last week. I can JUST see it when the sun hits it right. I hate screen protectors, and the actual screen feels so much better than any protector I've found. So I'd suggest not getting one.
I decided to not take any chances. I put a Klean Kare screen protector on it. Fits perfectly and lets your finger glide across the screen , not sticky or anything like that.
Thank you everyone for the advice.
I think I'll be getting a screen guard
Better safe than sorry.
Screen protectors are cheap.
Smart phones aren't.
Sent using Tapatalk
I Originally had the KlearKare Bulk Invisible Screen Shield Protector which is a wet application and had issues with ripples and such not coming off so I decided to go for the dry application instead and bought the Halo Screen Protector Film Invisible (Clear) (3-Pack) which works great. It is smooth sliding and protects well against scratches, I like that they give you 3 as one will get scratched after use over time. (both are from amazon)

Screen Protectors

So, after a week of use; I am starting to get little scratches on the glass of the watch. Anybody have any ideas on how I could get a decent screen protector for the watch? I know there aren't any perfectly sized ones for this device but maybe somebody here already found one that fits.
You may be getting real scratches on the screen, but be aware that the sapphire-coating on the TS also can appear scratched when it really is just marked. To clean those markings off takes some fairly serious buffing, but you might find the screen was not really scratched and comes out clean again.
There are no screen protectors currently available specifically cut to fit the TS. You could cut one yourself, maybe using that peel-off sticker it shipped with.
Sent from my Nexus 7 using Tapatalk
I cut my own screen protector out of an old one (unused) that I had laying around. Turned out horrible.
It was the more rigid type and where the edge of the TrueSmart screen has a bevel the screen protector was just hanging out over it. It ended up collecting dirt and made it hard to access the back and menu swipe actions. I also considered cutting it back to only the actual screen portion but I figured that was just going to make those swipe actions even more miserable so I just tossed it.
My guess is that the only thing that would work would be one of the more flexible stretchable type screen protectors, not sure how well they would conform to the bevel on the glass though.

WTF...3 days..and the screen is already F'ed up...for no reason? opening and closing?

Had the Duo since Friday...love it...or should I say loved it. Got the hang of the software, and for me it was awesome and had fun....UNTIL..I attempted to put the Zagg screen protector on it.. Heard it was horrible installation process, but got the first screen protector out of 4 on perfect...cleaned the second screen, and found the entire screen covered in scratches...thought there was a plastic screen protector on it or something, but couldnt peel anything off. The scratches came out of no where...had it for 3 days, bumper installed day one, no drops, no scuffs...it was treated like a baby...WTF??? Guess its going back...never thought I would have to send it back because its damaging itself opening and closing apparently.
cleaned the screens to install the Zagg glass screen protector I purchased from Best Buy. Cleaned the first screen, no problems and installed the screen protector. Everyone was saying that the Zagg was horrible to install. I installed it perfect on the first screen. Started to prep the second screen on the left...cleaned it with the Zagg supplied wipes, and saw all the scratches on the screen before I installed the screen protector. The scratches were so bad, I thought the DUO came installed with a cheap plastic screen protector...but it doesnt..
the scratches on the left screen is what is concerning. Looks like its from opening and closing the phone, cant think of anything else that would cause it.
​
one028 said:
cleaned the screens to install the Zagg glass screen protector I purchased from Best Buy. Cleaned the first screen, no problems and installed the screen protector. Everyone was saying that the Zagg was horrible to install. I installed it perfect on the first screen. Started to prep the second screen on the left...cleaned it with the Zagg supplied wipes, and saw all the scratches on the screen before I installed the screen protector. The scratches were so bad, I thought the DUO came installed with a cheap plastic screen protector...but it doesnt..
the scratches on the left screen is what is concerning. Looks like its from opening and closing the phone, cant think of anything else that would cause it.
Click to expand...
Click to collapse
Those scratches do not appear to be from opening and closing unless the hinge is (really) wobbly, they look like they are from having some sort of dirt or grit on something and trying to wipe the screen with it.
Might check I saw a reddit of people having issues with the screen shorting out too...I would check on if anyone else is getting scratches too?
Any chance your leaving is folded back?
Have you reached out to MS yet? So far for me they are terrible and take a day plus to answer though social media.
Honestly these have the classic Clean with dirty cloth scratching. Like there was a small piece of sand on the screen or cloth when it was cleaned. Those are not in anyway caused by the screen rubbing, the screen can't do that to itself.
Honestly loved the device but whoever decided to put glass on the front back was a huge mistake. Damn thing fell out of my pocket while sitting in a normal height chair and the whole back is cracked. Very disappointed in how fragile this device is. Dropped my other devices numerous times over the years from standing and never one problem. All this took was one short drop
Sounds like someone has an issue with dropping phones. It's not surprising that if you drop a device this thin that's glass front and back, it might break. Just the luck of the bounce.

Categories

Resources