Update 02/22/2016: Android 6.0.1 (Official) for Galaxy S6/S6 Edge
Download Rom Android 6.0.1 Galaxy S6 Edge - G920F: HERE
Download Rom Android 6.0.1 Galaxy S6 Edge - G925F HERE
Download Rom Android 6.0.1 Galaxy S6 - G920S/L/K HERE
Download Rom Android 6.0.1 Galaxy S6 Edge - G925S/L/K HERE
# Install TW Android 6.0.1 BETA Rom - G920F
(Can be installed from any base !)
Download: http://samfirm.net/threads/beta-galaxy-s6-g920f-android-marshmallow-6-0-1-flashable-01-15-2015.4/
- Copy G920F_3ZPA1_M(6.0.1)_Flashable.zip to your devices
- Copy BETA-SuperSU-v2.66_Edition.zip to your devices (option)
- Into Download mode flash BOOTLOADER_G920FXXU3COI9-L(5.1.1).tar (BL) & TWRP-2.8.7.2_G920F.tar (AP) via Odin
- Into Recovery
- Install G920F_3ZPA1_M(6.0.1)_Flashable.zip
- Install BETA-SuperSU-v2.66_Edition.zip (option)
- Into Download mode, flash BOOTLOADER_G920FXXU3ZPA1-M(6.0.1).tar via Odin (BL)
- Reboot (10 minutes for first booting !)
G925F: http://forum.xda-developers.com/gal...t/g925f-android-marshmallow-6-0-beta-t3293964
# Test Deodex TW Android 6.0.1 BETA Rom - G920F
...
Click to expand...
Click to collapse
#1
If you tried this method g920i know if I would be glad if the installation is complete
Hi, i've installaed recovery, with old metod with modified bootloader, and i have knox = 0. if i flash this bootloader i'll tripp knox? can i install without new bootloader?
Edoardo001 said:
Hi, i've installaed recovery, with old metod with modified bootloader, and i have knox = 0. if i flash this bootloader i'll tripp knox? can i install without new bootloader?
Click to expand...
Click to collapse
Knox trip, Android M work for new bootlaoder only !
work on s6 edge?
ludovienne said:
work on s6 edge?
Click to expand...
Click to collapse
For S6 Edge http://forum.xda-developers.com/gal...t/g925f-android-marshmallow-6-0-beta-t3293964
ac
If I flash marshmallow bootloader will I still be able to use 5.1.1 ROMS?
it works on G920i?
Has anyone tried the rom? Im downloading the files right now,but i wanted to be sure if it's worthy before updating
alb.boy said:
Has anyone tried the rom? Im downloading the files right now,but i wanted to be sure if it's worthy before updating
Click to expand...
Click to collapse
I was on 5.1.1, booted into twrp, did a factory reset, flashed the rom zip, flashed supersu 2.66, then odin with the 6.0.1 bootloader, now its booting up which is a good sign.
On first boot there was ucspinpad crashes, but that went away, i was able to setup accounts. Did a reboot and things are settling in. Good work OP.
--->
Mentalmuso said:
I was on 5.1.1, booted into twrp, did a factory reset, flashed the rom zip, flashed supersu 2.66, then odin with the 6.0.1 bootloader, now its booting up which is a good sign.
On first boot there was ucspinpad crashes, but that went away, i was able to setup accounts. Did a reboot and things are settling in. Good work OP.
--->
Click to expand...
Click to collapse
Oki thnx man,im going to flash this tomorrow morning,hope everything goes right for you
Hi, Friends. I will flash this rom tomorrow. Id like to know if theres a way to restore my wifi passwords. I use Titanium Backup. I know if i create a update.zip file i can restore all app+data. What about wifi passwords? Thanks in advance.
radiobicho said:
Hi, Friends. I will flash this rom tomorrow. Id like to know if theres a way to restore my wifi passwords. I use Titanium Backup. I know if i create a update.zip file i can restore all app+data. What about wifi passwords? Thanks in advance.
Click to expand...
Click to collapse
I think titanium backup can save your wifi settings.
--->
Can anyone please confirm if it works on 920i?
Highly unlikely it will work for 920i because you have to flash bootloader and the bootloader provided is only for 920f variant (which from what I recall, isn't cross-variant compatible)
I'm gonna try this now!
Thank you very much Manh_IT! Thank you, for all your efforts and hard work!
I'll report back in a few minutes with the results.
EDIT: YAYY!!! ITS ALIVE!!!
Booted and fully working on the 920FD! The new dual sim options wihtin M are awesome btw! Everything without any issues at all! Apps installing and working, Wifi working, everything.
EXCELLENT JOB Manh_IT! Just awesome!
ChemicalBrother said:
I'm gonna try this now!
Thank you very much Manh_IT! Thank you, for all your efforts and hard work!
I'll report back in a few minutes with the results.
EDIT: YAYY!!! ITS ALIVE!!!
Booted and fully working on the 920FD! The new dual sim options wihtin M are awesome btw! Everything without any issues at all! Apps installing and working, Wifi working, everything.
EXCELLENT JOB Manh_IT! Just awesome!
Click to expand...
Click to collapse
Are you getting ucspinpad crash on boot?
Sent from my SM-G920F using Tapatalk
Just flash successfully. M is so cool :3
Related
Android Marshmallow 6.0.1 for Samsung J5 (F/H/FN/M/G/Y/N)
Here you can discuss everything that concerns the new update
Join the conversation and discussion
Congratulations to the owners of models J500F:good:
and wait for the update to other models
Download model J500F
http://www.sammobile.com/firmwares/download/73792/J500FXXU1BPF4_J500FODD1BPF4_INS/
as the news was announced
http://www.sammobile.com/2016/06/14...500f-getting-the-marshmallow-update-in-india/
update is great..
UI and animations are amazing but they haven't given the option to format SD card as internal. It can be done with Adb however without rooting just Google it.. .
Also the phone seems more snappy and fast..
Congratulations to the owners of models J500M
and wait for the update to other models
Download model J500M
https://samsung-firmware.org/download/Galaxy J5/8vp8/ZTO/J500MUBU1BPF3/J500MZTO1BPF2/
wowanbelousov said:
What about new TouchWiz?
and if you tried to install Root and TWRP give answer?
Thank you
Click to expand...
Click to collapse
New touch wiz is great especially the contacts app..
More or less similar than before only minor changes...
Since I have no plans to root it as of now so I can't tell you about twrp or anything..
Messaging is now very laggy on marshmallow. Lollipop was better!
Yet, overall, smooth update for our galaxy J500.
But i have 2 concerns. Please help me out:
1.After i updated my J500F to the indian marshmallow, my phone is permanently on roaming and the mobile internet(lte/3g/2g) doesn't work. Do you think it's related to this update? Due to the fact that i am from Romania and the rom is India?
2. Can i still root my J500F running on marshmallow with the same procedure of CF-AUTO-ROOT which is already online for lollipop?
Thanks!
Congratulations to the owners of models J500H
and wait for the update to other models
Download model J500H
https://samsung-firmware.org/download/Galaxy J5/642b/SER/J500HXXU1BPG2/J500HOXE1BPG2/
Adoptable storage feature not present
I tried the adb hack for enabling adoptable storage (use sd card as internal storage) and it is NOT working.. :crying: dumb Samsung!
wowanbelousov said:
Yes, you can get better .. .no root (zip) through TWRP
Click to expand...
Click to collapse
So you suggest that i root via TWRP?
Lawr3nce said:
So you suggest that i root via TWRP?
Click to expand...
Click to collapse
Yes,And so it is wise to
wowanbelousov said:
Yes,And so it is wise to
Click to expand...
Click to collapse
Although the point is not working TWRP MARSHMALLOW
http://forum.xda-developers.com/showpost.php?p=67369502&postcount=142
How to root the android M? I read somewhere in the forum that TWRP recovery is't working on v6.
Does titanium backup working on android M?
What are the bloatwares included?
What about link2sd compatibility? I heard Samsung has disbled adopted storage.
Aaah....so how on earth will we now root our J500F on marshmallow? Doesn't the odin cfautoroot flash method work??
Congratulations J500F!
Ok, ok ....congrats,wonderful,splendid,smooth.....BUT....how can we root our MARSHMALLOW galaxy J500F ?
Anyone?
Lawr3nce said:
Ok, ok ....congrats,wonderful,splendid,smooth.....BUT....how can we root our MARSHMALLOW galaxy J500F ?
Anyone?
Click to expand...
Click to collapse
Download the firmware 6.0.1 https://samsung-firmware.org/download/Galaxy J5/9c89/INS/J500FXXU1BPF4/J500FODD1BPF4/
and flash Odin....(I hope you know how to Use Odin)
That's all!
aight the thing is, i'm using nick verse's cm12.1 for j500f , and it's good, a few bugs but ok, and it's 250mb~ , this **** is 1.1GB with probably full of crappy side apps which requires extra effort to wipe off of phone and still takes so much space in memory right? I guess i'll wait for cm13. Any suggestions? should i be using this?
wowanbelousov said:
Download the firmware 6.0.1 https://samsung-firmware.org/download/Galaxy J5/9c89/INS/J500FXXU1BPF4/J500FODD1BPF4/
and flash Odin....(I hope you know how to Use Odin)
That's all!
Click to expand...
Click to collapse
And can i get back my warranty(reset my knox) IF, after i root via odin, I WIPE data/cache AND REFLASH stock rom???
Lawr3nce said:
And can i get back my warranty(reset my knox) IF, after i root via odin, I WIPE data/cache AND REFLASH stock rom???
Click to expand...
Click to collapse
Installation of this version does not affect the warranty
If you of course do not have installed TWRP or ROOT the warranty is not removed
wowanbelousov said:
Installation of this version does not affect the warranty
If you of course do not have installed TWRP or ROOT the warranty is not removed
Click to expand...
Click to collapse
Thanks!
So assuming i root via odin, can i get my warranty back by reflashing stock rom??? if i do a clean reflash of stock rom, will the knox get back to 0x0?
Hello,
Tried all ROMS, none is working, below is the detail:
Installed
1 . CRISSCROSS ROM - no audio, while on call in earpiece and loudspeaker
2 . XtreStoLite-ROM-3.3.1-DPDP.zip ROM, Problem - AFter flash Phone model shows G925F AND NO CONNECTION TO NETWORK, EMERGENCY CALLS ALL TIME, TRIED flashing MODEM for g925w8 no LUCK
3. KIngfisher ROM, after flashing Kingfisher ROM, phone is STUCK AT
*KERNEL IS NOT SEANDROID ENFORCING* and phone will not turn ON.
SO , I guess there is NO working CUSTOM ROM fOR G925W8,canada. At the end I flashed stock BOJ7 AND Phone is working perfectly with 5 1 1 G925W8 BOJ7
I'm using the G925W8 on Xtrestolite. You must be missing something. I'm not sure what though
KAwAtA said:
I'm using the G925W8 on Xtrestolite. You must be missing something. I'm not sure what though
Click to expand...
Click to collapse
so why am I getting emergency calls?
1 can you tell me in detail that which steps did you follow?
2 what was your android version when you flashed rom?
3 what is your baseband verison now?
4 Was it rooted already?
5 Does this rom have spanish langauage? can you check for me?
Thank you
@Administr4tor
Custom ROMs for that work for W8
I've have confirmation from multiple users that my OZOP Rom is compatible and working flawlessly for the following devices Flat and Edge (rom is Edge based) F/I/T/W8. Could be more this are just the confirmed working devices.
Also OZOP is currently very active with development and actually about to be updated!
What ever Rom you decide is up to you.
Just letting you know there are options available.
Good luck
I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system
Nothing seems to work, No matter what I have No network connection... on any rom..
AndroTechGuy said:
Nothing seems to work, No matter what I have No network connection... on any rom..
Click to expand...
Click to collapse
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.
xstokerx said:
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.
Click to expand...
Click to collapse
I could have sworn I was running 6.0.1 stock, Maybe I wasn't, but alright I'll try to find the radio. thanks mate
christopherrrg said:
I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system
Click to expand...
Click to collapse
yes, I need updated call fix as the one I have is only for 5 1 1
Administr4tor said:
yes, I need updated call fix as the one I have is only for 5 1 1
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B4Gyz91x5k7gc2NBS2N5TFQwY0k/view?usp=drivesdk
Uploaded to my personal drive because I got tired of chasing the link. (Credits to author of zip, name inside.)
xstokerx said:
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.
Click to expand...
Click to collapse
Every time I try to flash the stock 6.0.1 i get SW Rev error Device 4 Binary 3.
AndroTechGuy said:
Every time I try to flash the stock 6.0.1 i get SW Rev error Device 4 Binary 3.
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1
xstokerx said:
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1
Click to expand...
Click to collapse
I know how to do it, the phone is unlocked, so not sure what carrier I should be flashing on it. I legit just need it to be able to use the Network, currently have it custom rom'd but no network.
xstokerx said:
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1
Click to expand...
Click to collapse
So the best I've been able to do is get it on a custom rom with no network connection at all. Seems like Im losing the ability to get it working. I tried Wind, telus stock 6.0.1's and i get the SW rev error, I've tried Rogers 5.1.1, and I get the same. Only thing that flashed on my device was "AP_G925W8VLU2AOG2_CL4808800_QB5701859_REV02_user_low_ship.tar" but it didn't boot past Galaxy S6 Edge logo, and recovery wasn't loading to try and factory reset to continue boot. I'm pretty sure this phone is dead.... I mean the custom rom was 6.0.1 with arter kernel, but no service... I'm lost...
christopherrrg said:
https://drive.google.com/file/d/0B4Gyz91x5k7gc2NBS2N5TFQwY0k/view?usp=drivesdk
Uploaded to my personal drive because I got tired of chasing the link. (Credits to author of zip, name inside.)
Click to expand...
Click to collapse
Thanks Sir.
Any ideas to my posts above?
guaranteed it's the bootloader and modem.
Once you flash the 6.0.1 ones via ODIN, then both crisscross and xtrolite should work. Crisscross, you will need to flash an independent audio fix which Christ have provided you in the post above.
Xtrolite (which I'm using with Twisted V4 Kernel) has it integrated so you shouldn't have any audio problems. Mind you, if you're still having trouble. Flash back 5.1.1 stock kernel and then let it update officially via samsung kies or OTA. Our phones now have 6.0.1 release so once you do that, you'll automatically have the new 6.0.1 bootloader and modem for our 925w8 phones. Then it'll be simple to flash a custom rom at that point.
Just update stock system to Marshmallow 6.0.1 (or flash stock 6.0.1 via Odin), then flash TWRP, do standard wipe with TWRP (Data, Cache and Dalvik), flash XtreStoLite via TWRP and everything will work
I have canadian S6 Edge and XtreStoLite is working very good
cripez said:
guaranteed it's the bootloader and modem.
Once you flash the 6.0.1 ones via ODIN, then both crisscross and xtrolite should work. Crisscross, you will need to flash an independent audio fix which Christ have provided you in the post above.
Xtrolite (which I'm using with Twisted V4 Kernel) has it integrated so you shouldn't have any audio problems. Mind you, if you're still having trouble. Flash back 5.1.1 stock kernel and then let it update officially via samsung kies or OTA. Our phones now have 6.0.1 release so once you do that, you'll automatically have the new 6.0.1 bootloader and modem for our 925w8 phones. Then it'll be simple to flash a custom rom at that point.
Click to expand...
Click to collapse
issue is I can't make the 6.0.1 stock files flash, always getting the SW rev error when cm.bin tries to flash, I've tried, Rogers, Wind, Telus stock files, nothing works. On CrissCross right now but not service... I want to get back to stock or at least make the bootloader work.
EDIT: Apparently using the most recent koodo stock, got me back to stock rom and with service! Now to root and do the custom rom properly! Thanks all!
christopherrrg said:
I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system
Click to expand...
Click to collapse
THIS G925W8 is working perfectly in 5 1 1 , I was able to make calls to all networks including GSM and WCDMA, I checked IMEI status with code 197328640 and IMIE status is OK, then after I flashed 6 0 1 and then the IMIE status turns to NOT GOOD and I am unable to make calls and stuck at EMERGENCY CALLS, looks like this PHONE IS JACKED??
I need help to unbrick my phone. Here are the details of my phone and things I did before it became useless.
- Version: Updated version of Samsung Galaxy S6 Edge Marshmallow Android 6.0.
- replaced its recovery with TWRP via odin (3.10.6)
- install a ROM with the use of TWRP recovery.
- After rooting my phone and flashing a new rom via TWRP, I can't use my phone's physical buttons.
I also tried full-wipe installation of Custom rom and I got the same issue. I tried restoring it to a stock rom, but it always says "Fail".
Do you guys have any suggestions how can I fix my phone?
Which rom did you flash?
What point in odin does it fail?
I take it you have G925F? Not G8.
Whats your region and what firmware did you try to flash (stock)
callumbr1 said:
Which rom did you flash?
What point in odin does it fail?
I take it you have G925F? Not G8.
Whats your region and what firmware did you try to flash (stock)
Click to expand...
Click to collapse
Thank you for your reply. Here are my answers:
-I flashed "CarHDRom" to my phone using TWRP 3.0.
- Yes, 825F is just a typo, G925F is the correct model name. I double checked it in the box.
- Philippines, and I already downloaded the firmware that you suggested in another post about softbricked g925F (G925FXXU3DPAD_G925FOXA3DPAD_XEU).
lexeroy said:
Thank you for your reply. Here are my answers:
-I flashed "CarHDRom" to my phone using TWRP 3.0.
- Yes, 825F is just a typo, G925F is the correct model name. I double checked it in the box.
- Philippines, and I already downloaded the firmware that you suggested in another post about softbricked g925F (G925FXXU3DPAD_G925FOXA3DPAD_XEU).
Click to expand...
Click to collapse
Have you flashed the stock firmware you just posted?
callumbr1 said:
Have you flashed the stock firmware you just posted?
Click to expand...
Click to collapse
Yes via Odin, and it always says:
NAND Write Start.
FAIL.
lexeroy said:
Yes via Odin, and it always says:
NAND Write Start.
FAIL.
Click to expand...
Click to collapse
I would first try with odin v 3.10.7 not 3.10.6.
Make sure you have origional cable and debug mode is on in dev options.
If this fails look for the firmware in the picture. Download and flash that.
Any problems let me know
callumbr1 said:
I would first try with odin v 3.10.7 not 3.10.6.
Make sure you have origional cable and debug mode is on in dev options.
If this fails look for the firmware in the picture. Download and flash that.
Any problems let me know
Click to expand...
Click to collapse
Still Fail after trying different original Samsung Cable. Please check my attachment.
By the way, where can I see that? Can you share the link for me?
lexeroy said:
Still Fail after trying different original Samsung Cable. Please check my attachment.
By the way, where can I see that? Can you share the link for me?
Click to expand...
Click to collapse
I will pm you the link.
Ohhhh thanks man! Finally this BTU firmware worked to my phone! ???
By the way, I'm going to flash a Custom rom here in my phone.. what recovery do you suggest?
lexeroy said:
By the way, I'm going to flash a Custom rom here in my phone.. what recovery do you suggest?
Click to expand...
Click to collapse
I suggest TWRP. Make a full Nandroid back up before just incase. But if anything goes wrong you can just flash that stock back to fix.
I would root first with cf autoroot.
Then flash your ROM.
Do a full wife when rom installer asks as this is safest way.
If it bootloops just wait.
Glad i can help
Well it looks like CarHDRom is not compatible with my phone. Tried flashing it twice and I waited for 30mins of booting but it doesn't continue.
lexeroy said:
Well it looks like CarHDRom is not compatible with my phone. Tried flashing it twice and I waited for 30mins of booting but it doesn't continue.
Click to expand...
Click to collapse
It is compatible im using it mate. Did you do a clean install? Wipe data when installer asks? My first boot took around 30 mims
30mins? Seriously?? Yeps.. I did a full wipe before booting with the CarHDRom.. is it the most stable TW based ROM now? ? thanks !
lexeroy said:
30mins? Seriously?? Yeps.. I did a full wipe before booting with the CarHDRom.. is it the most stable TW based ROM now? ? thanks !
Click to expand...
Click to collapse
Which kernel did you install when the installer asked you? Yeah id say its probably the most stable rom for s6 edge.
Did you do full wipe in aroma?
So, some of you might have noticed that I made some thread in General section, for Oreo TWRP Backup.
Some people do not like this idea, therefore I created a TWRP flash-able .zip for that.
I recommend a full wipe, or even a format data before flashing this.
Download the 3 zips, flash in order, boot, enjoy.
The files are stamped with a number, so you know what to flash in which order. Easy right ?
There is no root. I've heard SuperSU works flawlessly, but did not try as I am fine without it.
Downloads :
ROM:
https://drive.google.com/open?id=1zlFu-U2hxy2fvrkrHfZwxRMfZOBNSCoy
DmVerity:
https://drive.google.com/open?id=1AO3IgiJCDPtZD1LuS7T8viizjBGwVCWK
Fix:
https://drive.google.com/open?id=1PsMUCPOzQm6d8YS2SP9tpyK1_hgIqjiG
FOR DEVS : Beta 2 Partitions Dump feel free to use this, however please do credit me in your Aroma and XDA threads : https://drive.google.com/open?id=1RTzxthFvrV6-yU9yDwkceTGpF5srcTO7
Thanks to ambasadii, for his updater-script that I based this on.
what is the difference between the flashable and the partitions dump ?
knox
Will this trigger knox?
So is odin flashable rom !!! if yes use the word ODIN to be clear for someone ....thx
austriacus said:
what is the difference between the flashable and the partitions dump ?
Click to expand...
Click to collapse
No difference at all.
popmpopm said:
So is odin flashable rom !!! if yes use the word ODIN to be clear for someone ....thx
Click to expand...
Click to collapse
No, TWRP Flashable.
raj_p said:
Will this trigger knox?
Click to expand...
Click to collapse
This requires TWRP; if you have TWRP then your knox is already tripped.
@Paradoxxx
Please add step-wise guide to avoid confusion for people (whether to flash using Odin or TWRP).
Thank you. It has been very beautiful. everything works.
madnav said:
This requires TWRP; if you have TWRP then your knox is already tripped.
@Paradoxxx
Please add step-wise guide to avoid confusion for people (whether to flash using Odin or TWRP).
Click to expand...
Click to collapse
I added a big TWRP with bold and underline. That should do
ok nice but add TWRP in title
Any specific bootloader I have to be on? I'm on AQJ1 now...
Sent from outer space
cop1976 said:
Any specific bootloader I have to be on? I'm on AQJ1 now...
Sent from outer space
Click to expand...
Click to collapse
Should be working. If not AQH3 will do.
Does locking the phone work correctly?
Thanks
Downloading.
Which version od SuperSU will work? 2.85 or? If someone tested. If not, I'll test it by myself B)
How to enter recovery after flashing this rom? Bixby + vol up not working for me
Sent from outer space
Hi,
I'm a bit confused, how can i do to go back to stock firmware after installing this ?
Thanks
Anyone able to enter settings in Samsung mail?
For me, when pressed it takes you back to the inbox.
popmpopm said:
So is odin flashable rom !!! if yes use the word ODIN to be clear for someone ....thx
Click to expand...
Click to collapse
He hasn't used the term Odin but TWRP, if you're dyslexic or simply haven't been taught how to read don't post.
Hi flashing that update last nite on stock firmware BTU S8 boot ok but all apss and touchwiz crash all time no way to work so reflash with odin stock firmware.
maciejireland said:
Hi flashing that update last nite on stock firmware BTU S8 boot ok but all apss and touchwiz crash all time no way to work so reflash with odin stock firmware.
Click to expand...
Click to collapse
I have flash the 3 files and all perfectly work on my G950F, before i was on AQH3 XEF (France). Samsung health work, secured folder too. I juste have a "problème", it's that we can't install update by OTA. If your phone with this files crash, it's maybe because you don't have wipe with twrp before.
A bit of new stuff :
Lock screen security fixes :
950F:
https://drive.google.com/open?id=1PsMUCPOzQm6d8YS2SP9tpyK1_hgIqjiG
955F:
https://drive.google.com/open?id=1_rC4jnWEpd74shw_QzFbLmuz6yEiBqmh
Hi, Guys.
I just installed new OREO Firmware CRB7 [PDA G950FXXU1CRB7-CSC G950FOXM1CRAP-BL G950FXXU1CRB7 (DBT) - Changelist 12993656] and I did exactly the same steps as in the previous CRAP Firmware – HERE ( https://forum.xda-developers.com/galaxy-s8/development/oreoodin-official-firmware-galaxy-s8-t3748669 ).
This time I’ve used a new ODIN, v3.12.10.1, and I didn’t absolutely NOTHING different from what I had already done in the previous flash, so there is nothing more to add to what was said earlier, just follow what it has been said, as simple as that.
I'm so sorry no longer available to answer user questions, but understand that I'm just reporting something I just did, without any kind of problems.
Other questions that could be put beyond all that has been said, I could only answer with certainty if I had experienced this same doubt, that is, I would have to reproduce the problem to give the answer, understand?
Has anyone asked if through an update via update.zip could install Recovery TWRP or Root ... I would say yes, but I can not be sure of this because I never did ... it's a matter of trying!
So I leave here the LINK of new firmware, to be installed via ODIN, just like any other firmware to be installed this way ... there are no secrets.
I also leave LINK for Magisk v16.0 (1600), Magisk Manager v5.6.1, Magisk Uninstaller 2018-02-22 and TWRP 3.2.1-0 dreamlte, for anyone who needs this software.
Good Luck to All
PDA G950FXXU1CRB7 - CSC G950FOXM1CRAP - BL G950FXXU1CRB7 (DBT)
https://www.androidfilehost.com/?fid=746010030569955941
Magisk v16.0(1600)+MagiskManager v5.6.1+MagiskUninstaller_2018-02-22
https://www.androidfilehost.com/?fid=962187416754462528
Odin3 v3.12.10.1
https://www.androidfilehost.com/?fid=673956719939821692
TWRP 3.2.1-0 dreamlte
https://www.androidfilehost.com/?fid=746010030569953853
Hi. I have not yet installed any custom ROM, just installed TWRP and Magisk. Later I'm going to test some ROMs, but so far everything is perfect, no problem.
I already had a custom ROM before flashing the new firmware, so maybe I had no problems installing the TWRP or Root
Does this work on 950FD?
I'm on 'CRAP' right now.
Thanks
it does not let me flash the twrp, it tells me that only official binaries
juan_itoo said:
it does not let me flash the twrp, it tells me that only official binaries
Click to expand...
Click to collapse
Because phone is on Prenormal Status, no? If so, you may attend 7 days with phone ON, without restart them (I think [emoji848]).
S8 [email protected] v7.3.4(109)
limafranco said:
Does this work on 950FD?
I'm on 'CRAP' right now.
Thanks
Click to expand...
Click to collapse
Sincerely? I don't know, buddy! But phones I think identicals, so yes [emoji57]
S8 [email protected] v7.3.4(109)
This
juan_itoo said:
This
Click to expand...
Click to collapse
[emoji21]Just like I said
S8 [email protected] v7.3.4(109)
trocopassu said:
Sincerely? I don't know, buddy! But phones I think identicals, so yes [emoji57]
S8 [email protected] v7.3.4(109)
Click to expand...
Click to collapse
Yes, it works.
I just flashed. Its the same FW for both versions (Exynos)
How u r knox 0x0 after flashing twrp and magisk @trocopassu
mayank233 said:
How u r knox 0x0 after flashing twrp and magisk @trocopassu
Click to expand...
Click to collapse
Custom Kernel
S8 [email protected] v7.3.4(109)
Samsung just released a new Odin version that fixes the problem of the new compression files.
Now the flash is done the old way
PS: Odin version 3.13.1
Please, a mirror of the ROM
alejobog said:
Please, a mirror of the ROM
Click to expand...
Click to collapse
Hi.
File to download is not ROM but the Official Stock Firmware for the S8 G950F.
Now, new ODIN with has .lz4 file support, so you can download Official Stock Firmware directly from SamMobile and flash this on your S8 G950F (or other) with the new ODIN.
I leave here LINKs for SamMobile G950F Firmware and ODIN with support for .lz4 files
ODIN (.lz4 support) - https://www.androidfilehost.com/?fid=746010030569958654
SamMobile G950F (firmware) - https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/
hello ... after installing without any problem I wanted to install TWRP and I get this message in download mode 'Only official released binaries are allowed to be flashed' ... until here comes, I think I'll have to wait a week for it to be unlock ...
I also have a question ... then I can install TWRP, root, magisk, viperfx, etc. ??
I appreciate your advice and experiences in this regard ... or if you know of any solution to avoid having to wait. Thank you.
ppelao3k said:
hello ... after installing without any problem I wanted to install TWRP and I get this message in download mode 'Only official released binaries are allowed to be flashed' ... until here comes, I think I'll have to wait a week for it to be unlock ...
I also have a question ... then I can install TWRP, root, magisk, viperfx, etc. ??
I appreciate your advice and experiences in this regard ... or if you know of any solution to avoid having to wait. Thank you.
Click to expand...
Click to collapse
Yes, same problem.
if I have this message in download mode --- 'Only official released binaries are allowed to be flashed' after having installed official CRB7 --- can I flash official AQL5 ROM to go back to version 7 and thus be able to install TWRP ??
Please advise before doing so, as I understand in the state that is today, I must wait a week to install something in download mode ... is it correct?
If I make a mistake without asking, I could be without a phone for a week and I would have to commit suicide ... hahaha
Thank you.
Well I just have to thank the help that trocopassu gave to me to install the rom, was of extreme importance
Best wish to her
VITMAD said:
Well I just have to thank the help that trocopassu gave to me to install the rom, was of extreme importance
Best wish to her
Click to expand...
Click to collapse
Thanks, matte. Congratulations also to you for your decision.
how could you manage to flash without giving instruction about OEM unlock? i dont have option in dev mode for OEM unlock.