ABOUT THE GALAXY ALPHA CM-13.0 PROJECT
I'm working on getting CyanogenMod working on the Galaxy Alpha since October 2014. This ROM is not complete. There are still features which are not fully working and there are for sure things which need bugfixing. Please check the Known Bugs section before reporting issues.
I work on this project for FREE and putting in a lot of hours into it. A small donation would help to buy better tools to improve the development some day.
RECOVERY
To be able to install the ROM you need a recovery. I suggest to use my TWRP Recovery build. You can find it here.
BACKUP
Before installing the ROM you should create backups. The most important backup is to create one of the EFS partition and store it on safe place on your computer. If something goes wrong you need to restore this partition. It holds information about your device, like the MAC address for your wifi and information for the radio.
DOWNLOAD
You are storing very sensitive information on your phone. You always have to be careful what ROMs you flash and whom you trust. If you don't trust me then don't use my ROM or compile it from source by yourself.
The ROM will be gpg signed with my key 0xCC014E3D. You can verify the ROM with 'gpg --verify cm-12.1-20150901-UNOFFICIAL-slte-beta1.zip.asc '.
Detailed information and instruction for Windows can be found here.
Download BETA
FLASHING THE ROM
As this is a Marshmellow (Android 6) based ROM you need to flash sboot (bootloader) and the modem image from one of the latest LL releases. Or install a LL ROM via the Samsung update option. You can find the latest stock ROM here. Suggested modem version is: G850FXXU2COK6 or newer
I suggest to put the ROM on a USB disk and use a USB OTG cable to flash the ROM. It is also possible to put it on the emulated sdcard and flash it from there.
GAPPS
I suggest to use Open GAPPS.
REPORTING BUGS
Give the programmer some credit for basic intelligence: if the program really
didn't work at all, they would probably have noticed. Since they haven't
noticed, it must be working for them. Therefore, either you are doing something
differently from them, or your environment is different from theirs. They need
information; providing this information is the purpose of a bug report. More
information is almost always better than less.
Click to expand...
Click to collapse
Before reporting bugs, please check the KNOWN BUGS list below and read THIS HOWTO
XDA:DevDB Information
[ROM][SM-G850F] CM-13.0 UNOFFICIAL ROM, ROM for the Samsung Galaxy Alpha
Contributors
modpunk, raymanfx
Source Code: https://git.cryptomilk.org/projects/android/android_device_samsung_slte.git/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP/CWM Recovery
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 7
Beta Release Date: 2016-11-12
Created 2016-01-16
Last Updated 2016-11-12
KNOWN ISSUES
FINGERPRINT: We do not have support for the sensor yet
VOIP: Uses an invalid route
RIL: SMS broadcast subscriptions aren't working (generic failure)
MEDIA: HEVC videos don't work
CHANGELOG
2016-11-12 + BETA7
Fixed security issues in the Kernel
Fixed issues with bluetooth on some devices
Cleaned up wifi configs
Fixed camera issues (video capture is working again)
2016-07-08 + BETA5
Improved GPU performance
New radio libs from G850FXXU2CPD1_G850FLUX2CPF1_LUX
SELinux fixes
2016-06-15 + BETA4
Improved load balancing
Fixed voice echo cancellation processing
Several SELinux fixes
2016-04-11 + BETA3
Security fix for CVE-2015-1805
Fixed radio issues
Added higher resolutions to Snap camera
Several SELinux fixes
Several mobicore fixes (needed for fingerprint sensor in future)
2016-02-13 + BETA2
Updated Kernel sources to G850FXXU2COI3
Fixed some Kernel security issues
Improved power HAL
Switched to Snap camera
Fixes for gpsd with running armbands
2016-01-16 + BETA1
Initial M release
FREQUENTLY ASKED QUESTIONS
"It doesn't work."
Give the programmer some credit for basic intelligence: if the program really didn't work at all, they would probably have noticed. Since they haven't noticed, it must be working for them. Therefore, either you are doing something differently from them, or your environment is different from theirs. They need information; providing this information is the purpose of a bug report. More information is almost always better than less.
Please read How to Report Bugs Effectively
My modem doesn't work, what can I do?
Did you flash the latest MODEM firmware from the latest Lollipop release? The suggested firmware is at least G850FXXU2COK6 or newer
How do I use adb/logcat go get logs from my device
You can find a good tutorial here.
finally cm.13 for Slte device!
Sent from my SM-G850F using Tapatalk
Yo Modpunk congrats on getting this far! Now people will at least ***** less about when CM13 will be out lol
Quick question.. If I have your newest CM12.1 ROM installed, will there be any issues installing CM13 through that or do I still need to flash something beforehand? My phones modem version shows as G850FXXU1COF1, dunno if that's a newer or older version :3
hello i just put your rom on my alpha , everything works , the GPS sets slowly , the echo when you put the speaker in a conversation . but this is resolved by lowering the sound. renault car kit works it's great. for a first it's very positive I congratulate you .
Thanks a lot @modpunk
for all that just need the modem.bin of the latest Firmware..
to flash via ODIN (CP)
http://workupload.com/file/YbEVuPZB
as it's the same Baseband but should probably work for flashing:
http://forum.xda-developers.com/showpost.php?p=64434686 this one can be used
Best,
Blubberor
Thanks Blubberor, but did you mean to flash it with ODIN (CP)? Because CSC doesn't let me choose bin files
Darkbepo said:
Thanks Blubberor, but did you mean to flash it with ODIN (CP)? Because CSC doesn't let me choose bin files
Click to expand...
Click to collapse
yes CP. sorry for the mistake and thanks for the correction.
Something seems to make the modem flashing fail... :/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Darkbepo said:
Something seems to make the modem flashing fail... :/
Click to expand...
Click to collapse
I had problems as well so I just installed so full firmware. modem was extracted from it, though... androidfilehost
https://www.androidfilehost.com/?fid=24345424848486713
BUT its the same modem as in the discussion from CM12.1
Best,
Blubberor
SuperSU
Fantastic news. Congrats @modpunk. What is the version of supersu that should be used?
Amazing news man and Thanks a lot for your hard work,but is anyone having problems with the camera when switching to video recording ?
bilall22 said:
Amazing news man and Thanks a lot for your hard work,but is anyone having problems with the camera when switching to video recording ?
Click to expand...
Click to collapse
Yes I experienced this but you can easily install any camera app. Otherwise the Rom in comparison to resurrection is less laggy with buttery smooth transitions. Best rom till now!
Sent from my SM-G850F using Tapatalk
omarmonajed said:
Yes I experienced this but you can easily install any camera app. Otherwise the Rom in comparison to resurrection is less laggy with buttery smooth transitions. Best rom till now!
Sent from my SM-G850F using Tapatalk
Click to expand...
Click to collapse
Video recording works for me. Anyone knows which version of supersu is appropriate?
Sent from my Nexus 7 using Tapatalk
Bug bluetooth...
nuno.f.ferreira said:
Video recording works for me. Anyone knows which version of supersu is appropriate?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
I think it's because I have the full gapps package so Google camera didn't work.
Sent from my SM-G850F using Tapatalk
Could I update straight from your latest CM12.1 rom, without flash stock, wipe etc.?
piotr.pot said:
Could I update straight from your latest CM12.1 rom, without flash stock, wipe etc.?
Click to expand...
Click to collapse
Don't think so... Maybe you can if you have the latest modem.
Sent from my SM-G850F using Tapatalk
---------- Post added at 10:57 AM ---------- Previous post was at 10:57 AM ----------
piotr.pot said:
Could I update straight from your latest CM12.1 rom, without flash stock, wipe etc.?
Click to expand...
Click to collapse
I think it depends on the modem version
Sent from my SM-G850F using Tapatalk
nuno.f.ferreira said:
Video recording works for me. Anyone knows which version of supersu is appropriate?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
There is no need to install SuperSU. Root privileges is part of the Privacy Guard. So why do you need SuperSU? AFWall+ works just fine for me with root access ...
Related
Hi everyone,
I am proud to present my unofficial nightly build of CyanogenMod 12.0 for the LG G2 (D802).
Rom informations:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.0, which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
What works:
Audio
Bluetooth
Camera
Display
Input
Lights (brightness controll + leds)
Radio (RIL, making and receiving calls)
Storage (mount the device to computer etc.)
Sensors
Viberator
Wifi
Not working:
Double Tap to Wake (There is a new function though "Lift to Wake" which is standard on, you can find the switch for this option in Settings -> Display)
Media (Some report music playback working, but movie playback broken (confirmed by me as well)
Root (Not yet implemented in the rom by CyanogenMod, a workaround is flashing a SU package through recovery)
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CM12.0 Installation Guide
Note: CM for LG G2 (D802) is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.
Download CM12.0 and gapps zips and put them on the "Internal Memory".
20141112 CyanogenMod 12 Unofficial Nightly Release [EOL]: Links no more available. I'm not allowed to release public builds of this.
20141107 GApps: (DL from Basketbuild.com) (Credits: drewwalton19216801)
Before you install CM11.0: Preparation (First three are optional. If you want to start fresh, these can be skipped)
Install AppBak from Market, run it and save a list of all your apps.
Install SMS Backup and Restore from Market, run it and backup your SMS history.
Install Call Logs Backup and Restore from Market, run it and backup your call log history.
Boot into recovery. Make a full backup. You will need this backup later if you decide to go back to your previous ROM and data.
WARNING: Many apps will Force Close crash if you restore data from a previous ROM.
Install
Wipe data and cache.
Flash update*.zip.
Flash gapps*.zip.
Reboot phone.
After you setup your Google account, reinstall the three apps from Market in order to restore most of your apps, call log and SMS history.
WARNING: Do not restore backup data of system apps!
Note:In this rom I used the V20G Baseband. I think this is a requisite in using this rom.
Upgrades
Upgrades from previous versions of CM12.0 are the same process as install, except you do not need to wipe anything. Contrary to popular belief, you do not need to even wipe cache and dalvik-cache when upgrading between CM11.0 versions. You only need to wipe if you are doing a major upgrade, switching to a different ROM entirely, or attempting to fix bugs caused by bad backups or corrupt app data.
Credits
CyanogenMod Team
drewwalton19216801 (for his GAPPS package)
Sources
All our sources are on CyanogenMod GitHub
XDA:DevDB Information
[D802][ROM][5.0.0][LRX21M] CyanogenMod 12.0 Unofficial - [Nightly][12112014], ROM for the LG G2
Contributors
PsychoGame
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2014-11-13
Last Updated 2014-11-13
Does it boot? Major bugs?
Thx for the effort
Wow first working port??? I was scouring all over for this!!!! Can we have a Buglist???
eur-D802 / Lightning ROM V4 /Dorimanx kernel 8.4
davru said:
Does it boot? Major bugs?
Thx for the effort
Click to expand...
Click to collapse
Yes this build does boot perfectly. I just installed today so I don't know yet about the bugs. At least calling does work and wifi also.
PsychoGame said:
Yes this build does boot perfectly. I just installed today so I don't know yet about the bugs. At least calling does work and wifi also.
Click to expand...
Click to collapse
Im downloading now... In anycase if you prefer ill drop a quick test report to you via pm so not to clog up the thread???
eur-D802 / Lightning ROM V4 /Dorimanx kernel 8.4
PsychoGame said:
Yes this build does boot perfectly. I just installed today so I don't know yet about the bugs. At least calling does work and wifi also.
Click to expand...
Click to collapse
I'll test and report back. Which recovery did you use to flash?
Can I flash this on the VS980?
davru said:
I'll test and report back. Which recovery did you use to flash?
Click to expand...
Click to collapse
I used TWRP 2.8.0.1 to flash this build.
I don't know how other recovery versions react to this build, but I think if you have a recent recovery build of either CWM or TWRP you should be fine.
DarkFlasher said:
Can I flash this on the VS980?
Click to expand...
Click to collapse
No you can't flash this on the VS980.
This build has been specificly build for the D802 as this is the device I own myself.
PsychoGame said:
No you can't flash this on the VS980.
This build has been specificly build for the D802 as this is the device I own myself.
Click to expand...
Click to collapse
Thanks for the quick response!
I appreciate your work!
Download link is not opening for me. Its saying "404 not found". Any mirror or alternative??
This link does't work.
Sent from my LG-D802 using XDA Free mobile app
I'm aware of the downtime they have at dev-host at the moment. I'll search for a alternative immediatly.
Do we have to flash CM11 first and then to this?
₪LG G2₪
from OP: Note: CM for Galaxy S Plus is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.
Am I right to think this was a typo or something?
Zyner said:
Do we have to flash CM11 first and then to this?
₪LG G2₪
Click to expand...
Click to collapse
No you don't have to, you can also fresh install it on the device but then you have to use the installation instructions from the first thread.
I included install as well as upgrade instructions.
natalya said:
from OP: Note: CM for Galaxy S Plus is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.
Am I right to think this was a typo or something?
Click to expand...
Click to collapse
This is simply copied from another thread.
In order not to write the whole text.
He changed only the relevant data.
The one with the name he must have forgotten.
natalya said:
from OP: Note: CM for Galaxy S Plus is provided with no warranty. You are installing this software at your own risk. You may be violating your warranty.
Am I right to think this was a typo or something?
Click to expand...
Click to collapse
Sorry it was a typo indeed, I copied some stuff over from another thread so the lay-out would be build up in a sensefull way. Forgot to change it in there. Thanks for spotting it.
At the moment found another filehosting (mediafire) which allows me to upload my full CM12.0 build.
Currently I'm uploading it as we speak and will post it in OP when it's finished.
My upload speed unfortunately isn't very high so I expect it to take about half an hour to get it up.
Sorry for the inconvenience.
Update: Uploading of the mirror has finished. The MediaFire link is available in the OP thread.
Greetings PsychoGame
How dare you say sorry after bringing CM12 to G2? You even double-sorried on us!!!
Edit your post right now and dont be sorry hehe! We are the one's who are thankful, this is fantastic work!
Went a little off-topic, just hyped to get my very first run with L
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is our port of CyanogenMod 13 to the 2015 Moto E LTE (surnia). This ROM should run reliably, provided you are running a modem from 5.1 or newer.
Changelog:
CMXLog official nightly changelog
Old unofficial build changelog and download links
Downloads:
Final December 9th 2016 Build
Official nightly builds
Source Code:
ROM: https://github.com/CyanogenMod
XDA:DevDB Information
CyanogenMod 13 for Moto E LTE, ROM for the Moto E 2015
Contributors
squid2, scritch007, Alberto97, openhacker
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: No Longer Updated
Created 2016-03-05
Last Updated 2016-12-09
Installation Instructions
To avoid issues with enabling/disabling WiFi, you need to be running a suitable modem from Motorola's 5.1 release or newer. Modems for various models can be found in the modems thread by @EB20XY.
Installation is simple and follows the same basic procedure as any other source built custom ROM.
Boot into TWRP
Wipe system, data, cache, and dalvik
Flash the ROM, then GApps
Reboot
For GApps, many options may work. I've usually had success with OpenGApps, but I've also tried BaNkS in the past. When upgrading from a previous CM13 build, dirty flashing without any wiping usually works fine.
Thanks @squid2 for your awesome work and support
Thanks! CM13 for surnia is back to life
March 5th Release
The main change in this build is that I've updated the camera drivers to those of the Asian Marshmallow release. This camera driver update required changes at the kernel level too. If you want to use my "Squid Kernel", you will need to use the new r15c version (that I'll be releasing shortly).
squid2 said:
The main change in this build is that I've updated the camera drivers to those of the Asian Marshmallow release. This camera driver update required changes at the kernel level too. If you want to use my "Squid Kernel", you will need to use the new r15c version (that I'll be releasing shortly).
Click to expand...
Click to collapse
Would this build work smoothly on Asian Marshmallow drivers
On Stock Marshmallow + drivers
With unlocked bootloader
---------- Post added at 10:11 AM ---------- Previous post was at 10:00 AM ----------
And it's required to flash r15c kernel build after installing the latest cm13 05/03/2016 build
Pls reply
help
I do not get gapps , operating with rom
*** GApps Installation failed *******
PD:
and other recovery reinstating solve it ... ROM works perfect thanks
Hello @squid2. I have question. In this Rom you use your kernel r15c? Thanks for answer.
hallo guys, i have a problem. i have this baseband: M8916_200610.10.02.58.18R SURNIA_EMEA_CUST
I need to update in order to install the CM13 ?
which file should I use ?
i was looking at installing this but the usb connection on my phone is gone...is it possible to flash the modem files in twrp or something like that?
@up
This rom uses cm-13.0 kernel. If you want some additional kernel features, then flash Squid kernel.
@squid2
I still have problem with feedback vibration strength. It can be changed in Settings/Kernel Adiutor, but its only changes vibration for calls/messages, not UI feedback. For example, when touching navigation bar, vibration is 2x higher than on Lollipop, what is uncomfortable. Do you know any solution for this? In cm13 on Moto G2 vibration is fine.
Wysłane z mojego XT1524 przy użyciu Tapatalka
blacksh4dow said:
I still have problem with feedback vibration strength. It can be changed in Settings/Kernel Adiutor, but its only changes vibration for calls/messages, not UI feedback. For example, when touching navigation bar, vibration is 2x higher than on Lollipop, what is uncomfortable. Do you know any solution for this? In cm13 on Moto G2 vibration is fine.
Click to expand...
Click to collapse
The UI feedback vibrations are configured within overlays in the device tree. We are currently using the same configuration on all devices. I hadn't noticed it until you pointed it out, but yes, the vibration settings being used are heavier than the surnia stock ROM defaults. I personally don't mind the heavy haptic feedback and I always found my aunt's titan's haptic feedback to be too light for my taste. But if a lot of you don't like the current level of haptic feedback, I can make the configuration device specific and match the surnia stock ROM.
@squid2
I will be grateful if you make vibration patterns device-specific and same as stock.
@squid2 this new kernel version can enable the slowmotion recording?
ElDainosor said:
@squid2 this new kernel version can enable the slowmotion recording?
Click to expand...
Click to collapse
You can record at high frame rates using the Motorola camera app. However, the recordings play at full speed when viewed through the gallery.
Can anyone confirm if this will work for the XT1526 Boost Mobile (Sprint) version of this device?
Thanks.
sgirard1991 said:
Can anyone confirm if this will work for the XT1526 Boost Mobile (Sprint) version of this device?
Thanks.
Click to expand...
Click to collapse
I am using it now, seems to work just fine. Go grab the mvno slayer flashable zip from the moto e 2015 CDMA development side of this site and flash it after this ROM and everything will be all good for you.
Edit: one thing I found with this ROM, never had this problem before ever. I go into adaway, go to my whitelist, click on import, find my whitelist.text and click on it.. Then adaway crashes every time. Do you have any idea why?
Edit, again: I fixed the adaway issue. It was an oversight on my part, I had to press the 3 dot icon inside the import lists window and click on show SD card. The file was on my phone when it wasn't working, but whatever its fixed now lol.
I've now been using this new build nearly 24 hours.
Super slick and very very stable, no issues to report what so ever.
I'm using the new squid kernel r15c but I haven't flashed a newer 5.1 modem/baseband on my UK XT1524, I have never touched the modem/base band its still the original 5.0.2 that it was purchased with, all marshmallow/6.0.1 ROMs I've tried recently have all worked flawlessly, including telephone and WiFi.
Whilst it works so well, I'm leaving modem and baseband well alone (just being super cautious, not deliberately going against the devs instructions)
Super job!
ivan39 said:
I've now been using this new build nearly 24 hours.
Super slick and very very stable, no issues to report what so ever.
I'm using the new squid kernel r15c but I haven't flashed a newer 5.1 modem/baseband on my UK XT1524, I have never touched the modem/base band its still the original 5.0.2 that it was purchased with, all marshmallow/6.0.1 ROMs I've tried recently have all worked flawlessly, including telephone and WiFi.
Whilst it works so well, I'm leaving modem and baseband well alone (just being super cautious, not deliberately going against the devs instructions)
Super job!
Click to expand...
Click to collapse
You will get a roboot soon or later if you are still in baseband 5.0.2.
I know because i did the same thing and i though it was rock solid but after 2 days or so i got a reboot while typing a message in whatsapp and another while turnining on the WIFI.
It was all solved after flashing the 5.1 baseband, no problems whatsoever.
Awesome! I was hoping squid2 would bring CM13 back for us ?
Hello there everyone my full real name is Jon Wesley Tranchida (Tran-chee-da is how my last name sounds), I am a 20 year old Android Geek and Developer by heart and soul and this is my ROM. It is called TranchidaPop because I thought it was a great name because Android is so inspiring to us and it's also named after my last name and this ROM is based on Sultanxda latest CM12.1 ROM from April 10th 2016. This ROM base and kernel is not mine but it belongs to it's rightful owner which is sultanxda. The ROM base and kernel will never be mine. My ROM does have a lot of features, apps, mods , and tweaks and may or will have more features to come. I hope you can enjoy my ROM. I try to do my best for everyone! This ROM does not have root access included so you will have to flash SuperSu seperately and already has all the right google apps and services so there is no need to flash a Gapps package after you flash the ROM. All you do is flash the ROM and SuperSu! I also wish all of you the best of luck, joy, and happiness with my ROM and your daily lives and may God bless you all!
v1.0 ROM Features:
F.A.Q. Section:
Coming Soon!
ROM Bugs & Problems:
There shouldn't be any bugs right now in the build but if you find any do report them
ROM Installation Guide:
Please Read Very Important!
Before you flash my ROM make sure you flash the proper Lollipop Firmware and Modem! I will be uploading this flashable zip shortly! This will make sure you have everything working correctly when you flash my ROM!
Follow these steps to install TranchidaPop v1.0 ROM:
1. Download a custom recovery and flash it however you need, I recommend the TWRP v2.8.6.0 recovery. You will then need to download the supersu file if you want root access. Then download the Modem and Firmware file which i will be uploading shortly! Then finally download my latest TranchidaPop v1.0 ROM build.
2. In recovery first backup your current ROM (very important and optional)
3. In recovery mode if you have TWRP just wipe everything but internal storage.
4. Now in your TWRP recovery multi select the zips in the following order which are: Modem/Firmware file, ROM file, SuperSu file! I repeat do not flash any Gapps package! You will have many issues and gapps are already included
5. Let the files install and now proceed to step 6 or reboot device
Now this step is for optional Addons/Mods:
Now once ROM is installed don't reboot your device just yet. If you want to flash any Addons/Mods you can do so right now. Just flash them without wiping. After that is done you can proceed to Step 6.
6. Download my Addon/Mods & future ROM updates if you want.
7. Want to leave positive feedback or suggestions? Please do on this thread or you can PM me!
ROM Screenshots:
Coming Soon!
ROM Addons/Mods Section:
Coming Soon!
Latest ROM Downloads:
ROM Download here:
SuperSu Download here:
Modem/Firmware here:
ROM Credits Section:
reserved for future use and ROM version changelog
v1.3:
1. Rebased on sultanxda CM12.1 Build from April 10th 2016
2. Updated Gapps Files in ROM
3. Added Tons more apps and features in the ROM
4. Updated all apps and mods in the ROM as of 4/10/16
5. All bugs and/or problems should be fixed now
6. New boot animation
v1.2:
1. Fixed a major bug where you couldn't use the ROM at all because nfc kept popping up saying it force closed during the CM setup wizard right after the opo booted up for the first time. Now the ROM is usable again thanks to me fixing it completely and rebuilding the ROM all over again. Please refrain from downloading v1.1 as it is unusable unfortunately. Instead download this latest build and you will be golden
2. Decreased ROM size a teeny tiny bit
v1.1:
1. Changed ROM Zip Structure and now it is 3X faster when flashing ROM!
2. Decreased ROM Size a little bit
3. Hopefully fixed bugs as if there were any idk i forgot
4. Updated ROM build date and time
5. Stay tuned for my next ROM which will be based off of the latest Sultanxda marshmellow build
6. Removed SuperSu Root access in the ROM so now you have to flash the v2.46 supersu zip
v1.0:
1. Initial Release
one more just in case, enjoy the ROM guys
why not Android 6.0.1 ??
gravin said:
why not Android 6.0.1 ??
Click to expand...
Click to collapse
I personally do not like the current state android 6.0.1 is in right now, its not that stable and I personally love android 5.1.1 LP builds rather than marshmellow right now thank you
To everyone i kindly ask that you please do not post comments about marshmellow or any other stuff besides my ROM or sultans 5.1.1 rom
as u have used sultans rom and kernel ! id like to ask if you have included the display drivers from sultans kernel as well ? because new opo with LG displays are causing display leak issues with sultans kernel !
Hi, JT1510365,
This your ROM is based on Sultanxda latest cm12.1 ROM. But we need ROM is based on Sultanxda latest cm13.0 ROM. And with support f2fs format!
Good luck!
crisis_trustee said:
Hi, JT1510365,
This your ROM is based on Sultanxda latest cm12.1 ROM. But we need ROM is based on Sultanxda latest cm13.0 ROM. And with support f2fs format!
Good luck!
Click to expand...
Click to collapse
I will see what I can do
Edit: Tried and failed sorry bro
Sent from my A0001 using Tapatalk
JT1510365 said:
I will see what I can do
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
clear my query pls ?
dendi said:
clear my query pls ?
Click to expand...
Click to collapse
Give me a sec jesus
As stated in the OP this ROM uses the kernel that is found in sultanxda latest cm12.1 build that my ROM is based off of
Sent from my A0001 using Tapatalk
JT1510365 said:
Give me a sec jesus
As stated in the OP this ROM uses the kernel that is found in sultanxda latest cm12.1 build that my ROM is based off of
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
then im prettty sure this issue persists bro ! it can be fixed though ! nikhil18 lighning kernel dev fixed it ! can u please work with him to fix in ur rom ?
dendi said:
then im prettty sure this issue persists bro ! it can be fixed though ! nikhil18 lighning kernel dev fixed it ! can u please work with him to fix in ur rom ?
Click to expand...
Click to collapse
I will try okay buddy
Hey everyone new build posted so see changelog in second post if you want to see what's new
Download v1.1 here: https://www.androidfilehost.com/?fid=24459283995307735
TranchidaPop v1.2 is now live it fixes a major bug that deals with a nfc popup never going away during the setup wizard of the ROM. Now the ROM is finally usable and great once again also can anybody give me feedback on how my ROM is doing because nobody seems to have tested it yet even the older versions?
You can grab v1.2 here bros: https://www.androidfilehost.com/?fid=24459283995307822
Here is a screenshot of the bug in TranchidaPop v1.1 just so you guys are aware:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
JT1510365 said:
I will see what I can do
Click to expand...
Click to collapse
OK, thank you!
But make Android 5.1.1 Lollipop in 2016 is moveton!
all People claim to developers work in 6.0, but none of ROM s its stable enougth. Great job.
no need to flash Gapps, I see...
ancarloro said:
all People claim to developers work in 6.0, but none of ROM s its stable enougth. Great job.
Click to expand...
Click to collapse
I don't agree. Rom Mm based are very stable for me.
Is this source built or only a modded ROM?
Setting.Out said:
Is this source built or only a modded ROM?
Click to expand...
Click to collapse
it is based off of sultanxda build of cm12.1 from march 2016 with my own apps and tweaks added
Sent from my SAMSUNG-SGH-I337 using Tapatalk
antmunny said:
no need to flash Gapps, I see...
Click to expand...
Click to collapse
whats the use of this post yeah that's right this post is useless so why don't you instead of writing this just give me feedback on how the rom is instead of just giving me useless info duh i mention 3 times in the OP that you don't need to flash gapps
Sent from my SAMSUNG-SGH-I337 using Tapatalk
yanner2012 said:
I don't agree. Rom Mm based are very stable for me.
Click to expand...
Click to collapse
I disagree and from now on we are not going to clutter this thread with anything marshmellow related ok people like i can't stand mm right now and i have to hear you all ***** like wheres marshmellow i am getting sick and tired of hearing the word marshmellow when our device hasnt even recieved a stock rom of mm so please just try this rom and give me feedback or else i will close this thread and remove my builds.
Also i am not going to make one either as i don't know how to make it and every time i try to make it the rom bootloops so i am not going to make a mm rom i am fine with my stable lollipop rom which is way better than mm
Sent from my SAMSUNG-SGH-I337 using Tapatalk
ABOUT THE GALAXY ALPHA LINEAGE PROJECT
I'm trying to get LineageOS working on the Galaxy Alpha. This ROM is not complete. There are still features which are not fully working and there are for sure things which need bugfixing. Please check the Known Bugs section before reporting issues. The ROM is beta state because it isn't complete and probably will never leave beta state. There are too many things which are not working correctly and supporting Exynos is a tough task.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I work on this project for FREE and putting in a lot of my free time hours into it. A small donation would help to buy better tools to improve the development some day.
RECOVERY
To be able to install the ROM you need a recovery. I suggest to use my TWRP Recovery build. You can find it here.
BACKUP
Before installing the ROM you should create backups. The most important backup is to create one of the EFS partition and store it on safe place on your computer. If something goes wrong you need to restore this partition. It holds information about your device, like the MAC address for your wifi and information for the radio.
DOWNLOAD
Download BETA
ROOT/SU ADDON
The ROM does not provide root access! For root access you need to flash the su-addon.
FLASHING THE ROM
As this is an Android based ROM you need to flash sboot (bootloader) and the modem image from one of the latest official Samsung releases. Or install a ROM via the Samsung update option. You can find the latest stock ROM here. Suggested modem is from a ROM version: G850FXXS2CQD3 or newer.
I suggest to put the ROM on a USB disk and use a USB OTG cable to flash the ROM. It is also possible to put it on the emulated sdcard and flash it from there.
GAPPS
I suggest to use Open GAPPS.
REPORTING BUGS
Give the programmer some credit for basic intelligence: if the program really
didn't work at all, they would probably have noticed. Since they haven't
noticed, it must be working for them. Therefore, either you are doing something
differently from them, or your environment is different from theirs. They need
information; providing this information is the purpose of a bug report. More
information is almost always better than less.
Click to expand...
Click to collapse
Before reporting bugs, please check the KNOWN BUGS list below and read THIS HOWTO
XDA:DevDB Information
SLTEXX ROM LINEAGEOS 14.1, ROM for the Samsung Galaxy Alpha
Contributors
modpunk, raymanfx
Source Code: https://git.cryptomilk.org/projects/android/android_device_samsung_sltexx.git/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP/CWM Recovery
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 9
Beta Release Date: 2017-11-30
Created 2017-01-03
Last Updated 2017-11-30
KNOWN ISSUES
CAMERA: Does not work very well, we have quite old blobs and they do not work well on Nougat
FINGERPRINT: We do not have support for the sensor yet
AUDIO: In call issues if you have Touch Sounds enabled
AUDIO: Stops working sometimes
CHANGELOG
The ROM does not provide root access! For root access you need to flash the su-addon.
2017-05-10 + BETA8
Kernel
Fixed several security issues
Update to Android 7.1.2_r8 (Security fixes)
2017-04-16 + BETA7
Kernel
Fixed several security issues
Update to Android 7.1.2
Fixed Wideband Bluetooth calls
Fixed minijail for OMX codecs
2017-03-03 + BETA6
Kernel
Updated mobicore driver from A700F
Updated camera driver from noblelte
Fixed NFC
Fixed audio quality issue
2017-03-01 + BETA5
Kernel
Several security fixes
Update to Android 7.1.1_r22
Several security issues fixed
Fixed several audio issues
Added support for adjusting notification LED brightness
2017-02-12 + BETA4
The ROM does not provide root access! For root access you need to flash the su-addon.
Kernel
Several security fixes
Several fixes for futexes and thread scheduling
Updated sound codec driver
Fixed audio recording
Unified Samsung Audio HAL (@raymanfx and myself did a complete rewrite)
Better audio handling
VoIP support
Improved voice quality
Fixed connections from the audio HAL to RILD (libsec-ril.so hexedit)
Added Nougat libraries from noblelte for AEC (Acoustic Echo Cancellation), AGC (Automatic Gain Control) and NS (Noise Suppression).
Updated libril to match AOSP
Improved FIMG2D acceleration
Fixed H264 video resizing issues
2017-01-24 + BETA3
Fixed security issues in the Kernel
Update to latest LineageOS 14.1
Several fixes to audio
Fixed APN database
2017-01-04 + BETA2
Fixed security issues in the Kernel
Update to latest LineageOS 14.1
2017-01-03 + BETA1
Fixed security issues in the Kernel
Update to LineageOS 14.1
Several smaller bugfixes
FREQUENTLY ASKED QUESTIONS
Do I need to wipe if I flash a newer version of this ROM
NO!
Do I need to wipe if I have CyanogenMod 13.x/14.x running and update to ROM
NO!
"It doesn't work."
Give the programmer some credit for basic intelligence: if the program really didn't work at all, they would probably have noticed. Since they haven't noticed, it must be working for them. Therefore, either you are doing something differently from them, or your environment is different from theirs. They need information; providing this information is the purpose of a bug report. More information is almost always better than less.
Please read How to Report Bugs Effectively
My modem doesn't work, what can I do?
Did you flash the latest MODEM firmware from the latest Lollipop release? The suggested firmware is at least G850FBOU1COL3 or newer
How do I use adb/logcat go get logs from my device
You can find a good tutorial here.
Props!is this your daily driver?
i tried to install this rom, but get this problem from twrp: "Can't install this package on top of incompatible data. Please try another package or run a factory reset".
I have stock LL on 850F. Twrp is the 3.0.3. I had problem even with cm13, so i think that it's my phone fault. How can i solve?
thanx
Hi @modpunk, first thank you for your amazing work.
I flashed your rom and after a couple of hours of use i noticed some bugs:
1) apn data empty
2) data not working after manual apn insert
3) red border display flickering
4) metallic voice call
5) error during carrier search
that's all for now.....
sandrino1983 said:
Hi @modpunk, first thank you for your amazing work.
I flashed your rom and after a couple of hours of use i noticed some bugs:
1) apn data empty
2) data not working after manual apn insert
3) red border display flickering
4) metallic voice call
5) error during carrier search
that's all for now.....
Click to expand...
Click to collapse
1) Then something is wrong with linking the database to the correct location
2) See 1)
3) This is a engineering build, I forgot to do a userdebug build. The red flashing is normal and means it does a full screen redraw
4) Which would mean you might have an old modem flashed.
5) I need to look into it
modpunk said:
1) Then something is wrong with linking the database to the correct location
2) See 1)
3) This is a engineering build, I forgot to do a userdebug build. The red flashing is normal and means it does a full screen redraw
4) Which would mean you might have an old modem flashed.
5) I need to look into it
Click to expand...
Click to collapse
so, for point 4) where i can find the newest modem? i can flash it with odin?
And for point 2), why data don't work even after manual apn insert?
sandrino1983 said:
so, for point 4) where i can find the newest modem? i can flash it with odin?
And for point 2), why data don't work even after manual apn insert?
Click to expand...
Click to collapse
2) The cbd needs access to two data bases and they have a different location in Andorid 7.1. So I created a link for the directory so cbd can find them in the old location. However doesn't seem to be working as expected. I guess I have to remove them and flash and see what is going wrong. I created them manually when I started to work on 14.1
4) https://www.sammobile.com/firmwares/database/SM-G850F/
I fixed the issue with the APN databases.
modpunk said:
I fixed the issue with the APN databases.
Click to expand...
Click to collapse
Any workaround for 3) red border display flickering ?
Hi,
first of all thanks for bringing android 6 and 7 to the galaxy alpha.
Today i tried to install the rom, but the recovery says, this rom is not compatible with my device (This package is for device: sltexx; this device is slte)
@modpunk
Thank you about your work :good:
modpunk said:
2) The cbd needs access to two data bases and they have a different location in Andorid 7.1. So I created a link for the directory so cbd can find them in the old location. However doesn't seem to be working as expected. I guess I have to remove them and flash and see what is going wrong. I created them manually when I started to work on 14.1
4) https://www.sammobile.com/firmwares/database/SM-G850F/
Click to expand...
Click to collapse
i've flashed latest modem but metallic voice still remain
p.s. after 30 minute of music my phone was very hot and noticed a battery drain....battery stats noticed 28% for "other"
Jozefk27 said:
Any workaround for 3) red border display flickering ?
Click to expand...
Click to collapse
This is not a bug it is a development feature
I will create beta2 tomorrow
lulle2007200 said:
Hi,
first of all thanks for bringing android 6 and 7 to the galaxy alpha.
Today i tried to install the rom, but the recovery says, this rom is not compatible with my device (This package is for device: sltexx; this device is slte)
Click to expand...
Click to collapse
Update TWRP first!
Beta2 is up!
Hi modpunk.
First of all, thank you for your work.
I ask you if the ROM is pre-rooted or there is a possibility to choose if root the device or not in "developer options" such as CM13 (now I use it with my complete satisfation).
More and more essential apps (such as banking operations or live video streaming) need unroot device in order to become the best choice for daily use.
Thank You again.
modpunk said:
I fixed the issue with the APN databases.
Click to expand...
Click to collapse
dirty flash beta2 over beta1 and apn problem still remain. I'm the only one?
LineageOS 18.1 for Sony Xperia XZ1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RELEASE
This is an alternative ROM for the Sony Xperia XZ1, offering several privacy features.
Please report any issues you observe apart from the ones listed below. Logs are needed for me to fix anything (preferably dmesg and logcat). I can't test NFC very thoroughly, to please report your findings.
FEATURES
Signed with dev keys
Up-to-date kernel
WireGuard kernel support
DOWNLOAD
You can download the latest releases here:
poplar (G8341):
twrp-3.5.0-0-20210117-poplar
lineage-18.1-20210117-UNOFFICIAL-1.0-poplar
poplar_dsds (G8342):
twrp-3.5.0-0-20210117-poplar_dsds
lineage-18.1-20210117-UNOFFICIAL-1.0-poplar_dsds
poplar_canada (G8343):
twrp-3.5.0-0-20210117-poplar_canada
lineage-18.1-20210117-UNOFFICIAL-1.0-poplar_canada
Check the ChangeLog below for firmware requirements!
INSTALLATION
Put the zip file of the ROM on your sdcard or internal storage, boot into recovery and flash. When coming from stock: boot into TWRP, format data, reboot to recovery and wipe all internal partitions. Then flash the ROM, GApps (if needed) and root (if needed).
Note: There is not going to be a LOS su addon anymore. If you need root, flash a root manager of your choice. No guaranteed support from LOS for this.
When updating from builds, simply dirty flash the ROM.
If coming from 17.1, please see advice below in second post ("UPGRADE LINEAGEOS").
KNOWN ISSUES
WFD is not working yet (waiting for new non-BSP blobs)
Stock camera is not working anymore due to incompatibility of stock library (libimageprocessorjni.so) with new libgui
You tell me...
Contributors
derf elot, modpunk, Rooted_Ansh
Thanks to the testers
coin3x, feduss, GiaSen, Gizanagi, hsheemi, kaancaliskan, sohrab1985
Source Code
poplar: https://github.com/whatawurst/android_device_sony_poplar
poplar_dsds: https://github.com/whatawurst/android_device_sony_poplar_dsds
poplar_canada: https://github.com/whatawurst/android_device_sony_poplar_canada
kernel: https://github.com/whatawurst/android_kernel_sony_msm8998
Rom Information
ROM OS Version: Android 11
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2021-01-17
Thread Information
Created 2021-01-17
Last Updated 2021-01-17
SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!
UPGRADE LINEAGEOS
I have not tried upgrading the device from 17.1 and cannot guarantee that it will work - you should do a backup just in case. If things go wrong, flash it as if coming from stock (see instructions in OP).
The following steps should work though:
Flash new twrp and boot into it
Flash new rom, opengapps and any updated root solution you use
Optional: Clear cache
Reboot
Note: When updating form Lineage 17.1, you maybe have to once change your preferred network type from 3g back to 4g/LTE.
UPGRADE FIRMWARE
Grab the Sony Stock firmware using e.g. XPeriFrim. You should always flash the firmware matching the LOS build.
Grab newflasher and put it in the same folder as the firmware files.
Read the newflasher original post on XDA for general instructions!
Remove the following from the folder so they won't get flashed:
all *.ta files (keep the one in the boot/ directory)
cache*.sin
fotakernel*.sin
kernel*.sin
system*.sin
userdata*.sin
vendor*.sin
Turn off your phone
Hold the volume down button and attach it via USB to your system till you see LED turning green
Run newflasher from within this directory to flash the remaining files
You can say yes to the first optional step, in case you don't have working drivers installed.
Skip the second optional step (dumping of trim area), it's useless if your bootloader is unlocked already and takes a long time.
How to get root?
As mentioned before, there will not be an official su addon from LOS anymore. If you need root, flash an unofficial solution.
Google Apps
You can download and install the Google Apps from opengapps.org. You need ARM64 and 11.x. I suggest to *always* use the pico or nano package. If you need additional apps you find them in the Play Store.
Open GApps for Android 11 is still in beta. You can download those releases here
MicroG
This ROM doesn't support Signature Spoofing. However we are watching MicroG and check if they provide newer builds e.g. for Android 11.
REQUIRED FIRMWARE: 47.2.A.11.228
CHANGELOG
2021-01-17 | 1.0| 47.2.A.11.228
Initial release
Thanks @derf elot ! For all your and the rest of the Dev team's efforts.
What can we (the community) do to help get the camera back up and running?
Ok THIS WAS THE BEST BIRTHDAY PRESENT EVER... I'll test it asap
ZombieLinux said:
Thanks @derf elot ! For all your and the rest of the Dev team's efforts.
What can we (the community) do to help get the camera back up and running?
Click to expand...
Click to collapse
Unfortunately, I am not sure there is much that we can do. The stock library that we need for the stock camera app to work properly (libimageprocessorjni.so) is not liking the new Android 11 libgui. We (also with the help of @j4nn ) tried to fix these issues in various ways, including shimming and forcing the use of the 10 libgui but haven't managed to get it working properly yet. Maybe we'll have a crack at it again at some point, but I wouldnt get my hopes up too much. It also doesn't help that the XZ2/3 series is not getting an official Android 11 update. Opencamera is a decent alternative, although it does lack some of the stock camera options.
JimKatsanos said:
Ok THIS WAS THE BEST BIRTHDAY PRESENT EVER... I'll test it asap
Click to expand...
Click to collapse
Happy birthday. I hope you enjoy
Oh nice, and I just got the device today (new and unopened) but for some reason I can't flash it to a different or use even the official tool from Xperia to "repair" my software.
First thing I'll do after upgrading will be checking this rom.
Thank you a lot!
Hello, nice job.
Smooth fresh install rom+Nikgapps, everyhing works nice,
but time to time phone call was inposible - calling stops in a 0 seconds.But i still was able receive phone calls. After receiving call - i can make a call for few times.Sorry can't provide any logs - use this phone as my main daily device, so quickly return to my previous rom (resurrection remix 8.6.4), where everything running well.
dzenius said:
Hello, nice job.
Smooth fresh install rom+Nikgapps, everyhing works nice,
but time to time phone call was inposible - calling stops in a 0 seconds.But i still was able receive phone calls. After receiving call - i can make a call for few times.Sorry can't provide any logs - use this phone as my main daily device, so quickly return to my previous rom (resurrection remix 8.6.4), where everything running well.
Click to expand...
Click to collapse
It's just working fine here with opengapps beta. Mostly likely nikgapps broke dialer app.
kaancaliskan said:
It's just working fine here with opengapps beta. Mostly likely nikgapps broke dialer app.
Click to expand...
Click to collapse
Can You tell me, where can i get opengapps for android 11?
dzenius said:
Can You tell me, where can i get opengapps for android 11?
Click to expand...
Click to collapse
Please read the OP's. There is a link in the 2nd post.
derf elot said:
Please read the OP's. There is a link in the 2nd post.
Click to expand...
Click to collapse
Thanks.Will download, flash and report on weekend.
dzenius said:
Hello, nice job.
Smooth fresh install rom+Nikgapps, everyhing works nice,
but time to time phone call was inposible - calling stops in a 0 seconds.But i still was able receive phone calls. After receiving call - i can make a call for few times.Sorry can't provide any logs - use this phone as my main daily device, so quickly return to my previous rom (resurrection remix 8.6.4), where everything running well.
Click to expand...
Click to collapse
I also tried Nikgaaps (full version from 12/30/2020) and I don't have this issue. Maybe you used a different version or build.
NOICE
Rom really smooth & gaming as same or maybe better than stock.
Thank You for the great work.
everything works fine, nfs too
The carrier profile can use the files from XZ3(oem.sin).XZ1 stop updating very early,XZ3 is constantly being updated.
The carrier which are China Unicom and China Telecom used is from XZ3(oem.sin).
This file is modified according to XZ3.(by iovf and 沙河新基金啊)
LYSZY6 said:
The carrier profile can use the files from XZ3(oem.sin).XZ1 stop updating very early,XZ3 is constantly being updated.
The carrier which are China Unicom and China Telecom used is from XZ3(oem.sin).
This file is modified according to XZ3.(by iovf and 沙河新基金啊)
Click to expand...
Click to collapse
I have added support for both of these internally, so a custom OEM should not be needed anymore. I know at least of one person where it's working on maple. is it not working for you?
derf elot said:
I have added support for both of these internally, so a custom OEM should not be needed anymore. I know at least of one person where it's working on maple. is it not working for you?
Click to expand...
Click to collapse
I'm sorry. I just found this option in Settings. It seems to work.
Thank you again for your reply.
By the way，are there any plans to add volte video calling?（This is not a requirement.）
Gesture Navigation (1st option) seems buggy sometimes especially while playing game bottom bar appears in center & (in landscape) bottom screen touch not response.