[SM-G850F][SLTEXX] LineageOS 14.1 UNOFFICIAL BETA9 (Nougat) - UPDATE: 2017-11-30 - Samsung Galaxy Alpha

ABOUT THE GALAXY ALPHA LINEAGE PROJECT
I'm trying to get LineageOS working on the Galaxy Alpha. This ROM is not complete. There are still features which are not fully working and there are for sure things which need bugfixing. Please check the Known Bugs section before reporting issues. The ROM is beta state because it isn't complete and probably will never leave beta state. There are too many things which are not working correctly and supporting Exynos is a tough task.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I work on this project for FREE and putting in a lot of my free time hours into it. A small donation would help to buy better tools to improve the development some day.
RECOVERY
To be able to install the ROM you need a recovery. I suggest to use my TWRP Recovery build. You can find it here.
BACKUP
Before installing the ROM you should create backups. The most important backup is to create one of the EFS partition and store it on safe place on your computer. If something goes wrong you need to restore this partition. It holds information about your device, like the MAC address for your wifi and information for the radio.
DOWNLOAD
Download BETA
ROOT/SU ADDON
The ROM does not provide root access! For root access you need to flash the su-addon.
FLASHING THE ROM
As this is an Android based ROM you need to flash sboot (bootloader) and the modem image from one of the latest official Samsung releases. Or install a ROM via the Samsung update option. You can find the latest stock ROM here. Suggested modem is from a ROM version: G850FXXS2CQD3 or newer.
I suggest to put the ROM on a USB disk and use a USB OTG cable to flash the ROM. It is also possible to put it on the emulated sdcard and flash it from there.
GAPPS
I suggest to use Open GAPPS.
REPORTING BUGS
Give the programmer some credit for basic intelligence: if the program really
didn't work at all, they would probably have noticed. Since they haven't
noticed, it must be working for them. Therefore, either you are doing something
differently from them, or your environment is different from theirs. They need
information; providing this information is the purpose of a bug report. More
information is almost always better than less.
Click to expand...
Click to collapse
Before reporting bugs, please check the KNOWN BUGS list below and read THIS HOWTO
XDA:DevDB Information
SLTEXX ROM LINEAGEOS 14.1, ROM for the Samsung Galaxy Alpha
Contributors
modpunk, raymanfx
Source Code: https://git.cryptomilk.org/projects/android/android_device_samsung_sltexx.git/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP/CWM Recovery
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 9
Beta Release Date: 2017-11-30
Created 2017-01-03
Last Updated 2017-11-30

KNOWN ISSUES
CAMERA: Does not work very well, we have quite old blobs and they do not work well on Nougat
FINGERPRINT: We do not have support for the sensor yet
AUDIO: In call issues if you have Touch Sounds enabled
AUDIO: Stops working sometimes
CHANGELOG
The ROM does not provide root access! For root access you need to flash the su-addon.
2017-05-10 + BETA8
Kernel
Fixed several security issues
Update to Android 7.1.2_r8 (Security fixes)
2017-04-16 + BETA7
Kernel
Fixed several security issues
Update to Android 7.1.2
Fixed Wideband Bluetooth calls
Fixed minijail for OMX codecs
2017-03-03 + BETA6
Kernel
Updated mobicore driver from A700F
Updated camera driver from noblelte
Fixed NFC
Fixed audio quality issue
2017-03-01 + BETA5
Kernel
Several security fixes
Update to Android 7.1.1_r22
Several security issues fixed
Fixed several audio issues
Added support for adjusting notification LED brightness
2017-02-12 + BETA4
The ROM does not provide root access! For root access you need to flash the su-addon.
Kernel
Several security fixes
Several fixes for futexes and thread scheduling
Updated sound codec driver
Fixed audio recording
Unified Samsung Audio HAL (@raymanfx and myself did a complete rewrite)
Better audio handling
VoIP support
Improved voice quality
Fixed connections from the audio HAL to RILD (libsec-ril.so hexedit)
Added Nougat libraries from noblelte for AEC (Acoustic Echo Cancellation), AGC (Automatic Gain Control) and NS (Noise Suppression).
Updated libril to match AOSP
Improved FIMG2D acceleration
Fixed H264 video resizing issues
2017-01-24 + BETA3
Fixed security issues in the Kernel
Update to latest LineageOS 14.1
Several fixes to audio
Fixed APN database
2017-01-04 + BETA2
Fixed security issues in the Kernel
Update to latest LineageOS 14.1
2017-01-03 + BETA1
Fixed security issues in the Kernel
Update to LineageOS 14.1
Several smaller bugfixes

FREQUENTLY ASKED QUESTIONS
Do I need to wipe if I flash a newer version of this ROM
NO!
Do I need to wipe if I have CyanogenMod 13.x/14.x running and update to ROM
NO!
"It doesn't work."
Give the programmer some credit for basic intelligence: if the program really didn't work at all, they would probably have noticed. Since they haven't noticed, it must be working for them. Therefore, either you are doing something differently from them, or your environment is different from theirs. They need information; providing this information is the purpose of a bug report. More information is almost always better than less.
Please read How to Report Bugs Effectively
My modem doesn't work, what can I do?
Did you flash the latest MODEM firmware from the latest Lollipop release? The suggested firmware is at least G850FBOU1COL3 or newer
How do I use adb/logcat go get logs from my device
You can find a good tutorial here.

Props!is this your daily driver?

i tried to install this rom, but get this problem from twrp: "Can't install this package on top of incompatible data. Please try another package or run a factory reset".
I have stock LL on 850F. Twrp is the 3.0.3. I had problem even with cm13, so i think that it's my phone fault. How can i solve?
thanx

Hi @modpunk, first thank you for your amazing work.
I flashed your rom and after a couple of hours of use i noticed some bugs:
1) apn data empty
2) data not working after manual apn insert
3) red border display flickering
4) metallic voice call
5) error during carrier search
that's all for now.....

sandrino1983 said:
Hi @modpunk, first thank you for your amazing work.
I flashed your rom and after a couple of hours of use i noticed some bugs:
1) apn data empty
2) data not working after manual apn insert
3) red border display flickering
4) metallic voice call
5) error during carrier search
that's all for now.....
Click to expand...
Click to collapse
1) Then something is wrong with linking the database to the correct location
2) See 1)
3) This is a engineering build, I forgot to do a userdebug build. The red flashing is normal and means it does a full screen redraw
4) Which would mean you might have an old modem flashed.
5) I need to look into it

modpunk said:
1) Then something is wrong with linking the database to the correct location
2) See 1)
3) This is a engineering build, I forgot to do a userdebug build. The red flashing is normal and means it does a full screen redraw
4) Which would mean you might have an old modem flashed.
5) I need to look into it
Click to expand...
Click to collapse
so, for point 4) where i can find the newest modem? i can flash it with odin?
And for point 2), why data don't work even after manual apn insert?

sandrino1983 said:
so, for point 4) where i can find the newest modem? i can flash it with odin?
And for point 2), why data don't work even after manual apn insert?
Click to expand...
Click to collapse
2) The cbd needs access to two data bases and they have a different location in Andorid 7.1. So I created a link for the directory so cbd can find them in the old location. However doesn't seem to be working as expected. I guess I have to remove them and flash and see what is going wrong. I created them manually when I started to work on 14.1
4) https://www.sammobile.com/firmwares/database/SM-G850F/

I fixed the issue with the APN databases.

modpunk said:
I fixed the issue with the APN databases.
Click to expand...
Click to collapse
Any workaround for 3) red border display flickering ?

Hi,
first of all thanks for bringing android 6 and 7 to the galaxy alpha.
Today i tried to install the rom, but the recovery says, this rom is not compatible with my device (This package is for device: sltexx; this device is slte)

@modpunk
Thank you about your work :good:

modpunk said:
2) The cbd needs access to two data bases and they have a different location in Andorid 7.1. So I created a link for the directory so cbd can find them in the old location. However doesn't seem to be working as expected. I guess I have to remove them and flash and see what is going wrong. I created them manually when I started to work on 14.1
4) https://www.sammobile.com/firmwares/database/SM-G850F/
Click to expand...
Click to collapse
i've flashed latest modem but metallic voice still remain
p.s. after 30 minute of music my phone was very hot and noticed a battery drain....battery stats noticed 28% for "other"

Jozefk27 said:
Any workaround for 3) red border display flickering ?
Click to expand...
Click to collapse
This is not a bug it is a development feature

I will create beta2 tomorrow

lulle2007200 said:
Hi,
first of all thanks for bringing android 6 and 7 to the galaxy alpha.
Today i tried to install the rom, but the recovery says, this rom is not compatible with my device (This package is for device: sltexx; this device is slte)
Click to expand...
Click to collapse
Update TWRP first!

Beta2 is up!

Hi modpunk.
First of all, thank you for your work.
I ask you if the ROM is pre-rooted or there is a possibility to choose if root the device or not in "developer options" such as CM13 (now I use it with my complete satisfation).
More and more essential apps (such as banking operations or live video streaming) need unroot device in order to become the best choice for daily use.
Thank You again.

modpunk said:
I fixed the issue with the APN databases.
Click to expand...
Click to collapse
dirty flash beta2 over beta1 and apn problem still remain. I'm the only one?

Related

[SM-G850F][SLTE] CyanogenMod 13.0 UNOFFICIAL BETA7 (Android 6.0) - UPDATE: 2016-11-12

ABOUT THE GALAXY ALPHA CM-13.0 PROJECT
I'm working on getting CyanogenMod working on the Galaxy Alpha since October 2014. This ROM is not complete. There are still features which are not fully working and there are for sure things which need bugfixing. Please check the Known Bugs section before reporting issues.
I work on this project for FREE and putting in a lot of hours into it. A small donation would help to buy better tools to improve the development some day.
RECOVERY
To be able to install the ROM you need a recovery. I suggest to use my TWRP Recovery build. You can find it here.
BACKUP
Before installing the ROM you should create backups. The most important backup is to create one of the EFS partition and store it on safe place on your computer. If something goes wrong you need to restore this partition. It holds information about your device, like the MAC address for your wifi and information for the radio.
DOWNLOAD
You are storing very sensitive information on your phone. You always have to be careful what ROMs you flash and whom you trust. If you don't trust me then don't use my ROM or compile it from source by yourself.
The ROM will be gpg signed with my key 0xCC014E3D. You can verify the ROM with 'gpg --verify cm-12.1-20150901-UNOFFICIAL-slte-beta1.zip.asc '.
Detailed information and instruction for Windows can be found here.
Download BETA
FLASHING THE ROM
As this is a Marshmellow (Android 6) based ROM you need to flash sboot (bootloader) and the modem image from one of the latest LL releases. Or install a LL ROM via the Samsung update option. You can find the latest stock ROM here. Suggested modem version is: G850FXXU2COK6 or newer
I suggest to put the ROM on a USB disk and use a USB OTG cable to flash the ROM. It is also possible to put it on the emulated sdcard and flash it from there.
GAPPS
I suggest to use Open GAPPS.
REPORTING BUGS
Give the programmer some credit for basic intelligence: if the program really
didn't work at all, they would probably have noticed. Since they haven't
noticed, it must be working for them. Therefore, either you are doing something
differently from them, or your environment is different from theirs. They need
information; providing this information is the purpose of a bug report. More
information is almost always better than less.
Click to expand...
Click to collapse
Before reporting bugs, please check the KNOWN BUGS list below and read THIS HOWTO
XDA:DevDB Information
[ROM][SM-G850F] CM-13.0 UNOFFICIAL ROM, ROM for the Samsung Galaxy Alpha
Contributors
modpunk, raymanfx
Source Code: https://git.cryptomilk.org/projects/android/android_device_samsung_slte.git/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP/CWM Recovery
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 7
Beta Release Date: 2016-11-12
Created 2016-01-16
Last Updated 2016-11-12
KNOWN ISSUES
FINGERPRINT: We do not have support for the sensor yet
VOIP: Uses an invalid route
RIL: SMS broadcast subscriptions aren't working (generic failure)
MEDIA: HEVC videos don't work
CHANGELOG
2016-11-12 + BETA7
Fixed security issues in the Kernel
Fixed issues with bluetooth on some devices
Cleaned up wifi configs
Fixed camera issues (video capture is working again)
2016-07-08 + BETA5
Improved GPU performance
New radio libs from G850FXXU2CPD1_G850FLUX2CPF1_LUX
SELinux fixes
2016-06-15 + BETA4
Improved load balancing
Fixed voice echo cancellation processing
Several SELinux fixes
2016-04-11 + BETA3
Security fix for CVE-2015-1805
Fixed radio issues
Added higher resolutions to Snap camera
Several SELinux fixes
Several mobicore fixes (needed for fingerprint sensor in future)
2016-02-13 + BETA2
Updated Kernel sources to G850FXXU2COI3
Fixed some Kernel security issues
Improved power HAL
Switched to Snap camera
Fixes for gpsd with running armbands
2016-01-16 + BETA1
Initial M release
FREQUENTLY ASKED QUESTIONS
"It doesn't work."
Give the programmer some credit for basic intelligence: if the program really didn't work at all, they would probably have noticed. Since they haven't noticed, it must be working for them. Therefore, either you are doing something differently from them, or your environment is different from theirs. They need information; providing this information is the purpose of a bug report. More information is almost always better than less.
Please read How to Report Bugs Effectively
My modem doesn't work, what can I do?
Did you flash the latest MODEM firmware from the latest Lollipop release? The suggested firmware is at least G850FXXU2COK6 or newer
How do I use adb/logcat go get logs from my device
You can find a good tutorial here.
finally cm.13 for Slte device!
Sent from my SM-G850F using Tapatalk
Yo Modpunk congrats on getting this far! Now people will at least ***** less about when CM13 will be out lol
Quick question.. If I have your newest CM12.1 ROM installed, will there be any issues installing CM13 through that or do I still need to flash something beforehand? My phones modem version shows as G850FXXU1COF1, dunno if that's a newer or older version :3
hello i just put your rom on my alpha , everything works , the GPS sets slowly , the echo when you put the speaker in a conversation . but this is resolved by lowering the sound. renault car kit works it's great. for a first it's very positive I congratulate you .
Thanks a lot @modpunk
for all that just need the modem.bin of the latest Firmware..
to flash via ODIN (CP)
http://workupload.com/file/YbEVuPZB
as it's the same Baseband but should probably work for flashing:
http://forum.xda-developers.com/showpost.php?p=64434686 this one can be used
Best,
Blubberor
Thanks Blubberor, but did you mean to flash it with ODIN (CP)? Because CSC doesn't let me choose bin files
Darkbepo said:
Thanks Blubberor, but did you mean to flash it with ODIN (CP)? Because CSC doesn't let me choose bin files
Click to expand...
Click to collapse
yes CP. sorry for the mistake and thanks for the correction.
Something seems to make the modem flashing fail... :/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Darkbepo said:
Something seems to make the modem flashing fail... :/
Click to expand...
Click to collapse
I had problems as well so I just installed so full firmware. modem was extracted from it, though... androidfilehost
https://www.androidfilehost.com/?fid=24345424848486713
BUT its the same modem as in the discussion from CM12.1
Best,
Blubberor
SuperSU
Fantastic news. Congrats @modpunk. What is the version of supersu that should be used?
Amazing news man and Thanks a lot for your hard work,but is anyone having problems with the camera when switching to video recording ?
bilall22 said:
Amazing news man and Thanks a lot for your hard work,but is anyone having problems with the camera when switching to video recording ?
Click to expand...
Click to collapse
Yes I experienced this but you can easily install any camera app. Otherwise the Rom in comparison to resurrection is less laggy with buttery smooth transitions. Best rom till now!
Sent from my SM-G850F using Tapatalk
omarmonajed said:
Yes I experienced this but you can easily install any camera app. Otherwise the Rom in comparison to resurrection is less laggy with buttery smooth transitions. Best rom till now!
Sent from my SM-G850F using Tapatalk
Click to expand...
Click to collapse
Video recording works for me. Anyone knows which version of supersu is appropriate?
Sent from my Nexus 7 using Tapatalk
Bug bluetooth...
nuno.f.ferreira said:
Video recording works for me. Anyone knows which version of supersu is appropriate?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
I think it's because I have the full gapps package so Google camera didn't work.
Sent from my SM-G850F using Tapatalk
Could I update straight from your latest CM12.1 rom, without flash stock, wipe etc.?
piotr.pot said:
Could I update straight from your latest CM12.1 rom, without flash stock, wipe etc.?
Click to expand...
Click to collapse
Don't think so... Maybe you can if you have the latest modem.
Sent from my SM-G850F using Tapatalk
---------- Post added at 10:57 AM ---------- Previous post was at 10:57 AM ----------
piotr.pot said:
Could I update straight from your latest CM12.1 rom, without flash stock, wipe etc.?
Click to expand...
Click to collapse
I think it depends on the modem version
Sent from my SM-G850F using Tapatalk
nuno.f.ferreira said:
Video recording works for me. Anyone knows which version of supersu is appropriate?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
There is no need to install SuperSU. Root privileges is part of the Privacy Guard. So why do you need SuperSU? AFWall+ works just fine for me with root access ...

[ROM][AOSP][7.1/8.1/9.0 BETA] Unlegacy Android Project

The Unlegacy Android Project​Introduction
Unlegacy Android started out as the OMAP4-AOSP Project. It was created in late 2015 in order to maintain a clean and organized place for pure AOSP support for various OMAP4 devices, such as the Galaxy Nexus and the Samsung Galaxy Tab 2 series. Over time this evolved to support more than just these devices, but still maintains its roots of supporting "legacy" devices that no longer receive "official" updates: hence Unlegacy Android was born. In our opinion, these ROMs are how the official updates would look.
On top of AOSP, we only include changes which are necessary to support the hardware, be secure, and get acceptable performance. Current features for mako include:
- Linux kernel 3.4.y merged in (currently 3.4.113 - mostly security patches and minor bug fixes)
- BFQ IO scheduler (official kernel 3.4 release), set up so GUI processes have the highest priority
- F2FS support from kernel 4.9 (for /data only! no point of f2fs on /cache)
- SELinux in Enforcing mode
Installation
If you're planning to install GApps, be sure to read the second post!
Aside from that, installation and upgrading is no different than on other ROMs.
Problems
- No known issues for mako yet.
If you notice anything, be sure to report it in this thread. Stability is our main concern. While I'm kind of busy, I usually read the thread and acknowledge the bug reports, even if I don't reply directly to them.
Downloads
See: http://builds.unlegacy-android.org. Our automated builds ensure that we always have the latest Android security patches merged in, without having to manually start and upload builds
We will have a built-in OTA updater (just like stock) soon (it's a work in progress)
Features?
There isn't much to say here - this is AOSP, if you install GApps, you pretty much get the same thing that's running on the Nexus devices (see the second post). The aim of this project is to create a fast and stable ROM - although, one could use Xposed (or similar) to add extra features.
As usual, feedback is appreciated
XDA:DevDB Information
Unlegacy Android Project, ROM for the Google Nexus 4
Contributors
Ziyan, amaces
Source Code: https://github.com/Unlegacy-Android
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: 7.1.2
Current Beta Version: 8.1
Created 2017-04-10
Last Updated 2018-09-04
Reserved
GApps
If you want to install GApps, we recommend Open GApps Micro.
An important note: as this is a pure AOSP ROM, installing GApps tends to be problematic: in order to try to avoid installation issues, be sure to install GApps immediately after installing the ROM, before booting the system for the first time. If you experience any issues with the Google applications, be sure to go into Settings -> Apps, and grant every permission to every Google application - most importantly, Google Play services.
In the case of an upgrade, be sure to re-install the GApps package, as upgrading wipes /system. You shouldn't need to re-set the permissions afterwards.
Stock-like setup
Disable the following built-in (AOSP) apps:
- Android keyboard (once you installed Gboard)
- Browser
- Calculator
- Camera
- Clock
- Email
- Gallery
Install the following apps from the Play store:
- Google Photos (https://play.google.com/store/apps/details?id=com.google.android.apps.photos)
- Calculator (https://play.google.com/store/apps/details?id=com.google.android.calculator)
- Chrome (https://play.google.com/store/apps/details?id=com.android.chrome)
- Clock (https://play.google.com/store/apps/details?id=com.google.android.deskclock)
- Gboard (https://play.google.com/store/apps/details?id=com.google.android.inputmethod.latin)
- Gmail (https://play.google.com/store/apps/details?id=com.google.android.gm)
- Google Calendar (https://play.google.com/store/apps/details?id=com.google.android.calendar)
- Google Camera (https://play.google.com/store/apps/details?id=com.google.android.GoogleCamera)
SafetyNet
The ROM should pass SafetyNet after installing GApps, without anything else. Keep in mind that installing extra stuff (SU, ...) might make it fail!
Rooting
You can flash the latest Magisk to get rooted.
Just a little note on this, I've been testing his build and it's been really smooth so far. (Even more than my own AOSP build) Also for other ROM's devs out there, he's the original dev who fixed the sensors and he also fixed the camera without relying on AOSP hacks. (Well except SELinux but that's another thing...) You can check out the source for more info about it.
Because I didn't have much time to work on it, I want to thank @Ziyan for his work on this. I could even say that eventual people who are currently on the AOSP build should go on this one moving forward.
From 1 February I check ROM periodically. For now ROM is not for me. It is too raw.
There are no navigation buttons for me and I can not disable them if I want to use Button Savior, for example. ROM does not see WiFi 5GHz.
However, I am pleased that there's a thread on XDA.
Forgive me if it has already been posted in the gapps thread, but is open gapps working for 7.1.2 builds? Last I checked, it was reported that setupwizard crashes on 7.1.2 due to being outdated. Thx!
Thanks not work gapps setup wizard screen
ze7zez said:
There are no navigation buttons for me and I can not disable them if I want to use Button Savior, for example. ROM does not see WiFi 5GHz.
Click to expand...
Click to collapse
Never heard about the navigation button issue... Might investigate it if I can get more feedback or reproduce the issue
About 5 GHz, it seems to work fine for me:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jer_ying_fd said:
Forgive me if it has already been posted in the gapps thread, but is open gapps working for 7.1.2 builds? Last I checked, it was reported that setupwizard crashes on 7.1.2 due to being outdated. Thx!
Click to expand...
Click to collapse
hasanben35 said:
Thanks not work gapps setup wizard screen
Click to expand...
Click to collapse
Yeah, Open GApps has a problem with setup wizard on 7.1.2 at the moment. I hope they'll fix it soon...
Ziyan said:
Never heard about the navigation button issue... Might investigate it if I can get more feedback or reproduce the issue
About 5 GHz, it seems to work fine for me: View attachment 4108596
Yeah, Open GApps has a problem with setup wizard on 7.1.2 at the moment. I hope they'll fix it soon...
Click to expand...
Click to collapse
Thx for confirming! For now I'll anxiously wait with the build already on my laptop ready to flash when the gapps are
Awesome Thank you for the continued development
Ziyan said:
Never heard about the navigation button issue... Might investigate it if I can get more feedback or reproduce the issue
Click to expand...
Click to collapse
I gave you a link to the thread. The code provided @spezi77 in post #2.
Request to Developers & Contributors ROMs for Nexus 4 on the navigation bar in TWRP
Ziyan said:
About 5 GHz, it seems to work fine for me.
Click to expand...
Click to collapse
That's right.
The ROM immediately shows 2 GHZ interfaces.
Within 12 seconds after the WiFi is switched on, 5 GHz interfaces are also displayed.
I was impatient.
If I dirty flash from 7.1.1 to 7.1.2 this ROM will be work without any issues?
I did a clean flash wiped everything but internal storage
I lose root frequently on this ROM and other nougat ROMs I'm using multirom twrp and multirom and hellspawn aosp nougat kernel revision 5
This ROM was installed in the primary slot of multirom
I used super su 2.79 and also tried magisk v12 neither worked
I used a 7.1.2 build with only flashing ROM and modifications : v4a an adreno driver and hellspawn kernel then booting
Then reboot to recovery and install open gapps pico 7.1
What am I doing wrong ?
Is multirom the culprit ?
[email protected] said:
I did a clean flash wiped everything but internal storage
I lose root frequently on this ROM and other nougat ROMs I'm using multirom twrp and multirom and hellspawn aosp nougat kernel revision 5
This ROM was installed in the primary slot of multirom
I used super su 2.79 and also tried magisk v12 neither worked
I used a 7.1.2 build with only flashing ROM and modifications : v4a an adreno driver and hellspawn kernel then booting
Then reboot to recovery and install open gapps pico 7.1
What am I doing wrong ?
Is multirom the culprit ?
Click to expand...
Click to collapse
Adreno driver 7.1.2 work ?
Kernel hellspawn work ?
Link please
Please open thread in nexus 5 too for this really​ AOSP rom
Sent from my Nexus 5 using Tapatalk
GAPPs
Ziyan said:
Never heard about the navigation button issue... Might investigate it if I can get more feedback or reproduce the issue
About 5 GHz, it seems to work fine for me: View attachment 4108596
Yeah, Open GApps has a problem with setup wizard on 7.1.2 at the moment. I hope they'll fix it soon...
Click to expand...
Click to collapse
Hello!
I was able to install the GAPPs:
1) flash rom
2) turn on the N4
3) flash gapps
4) superSU flash (optional)
That way I did not use the setup wizard, I just added my Google account to the Play Store.
(Translation by google trandutor)
hasanben35 said:
Adreno driver 7.1.2 work ?
Kernel hellspawn work ?
Link please
Click to expand...
Click to collapse
Hellspawn kernel aosp nougat mako just Google it
as for adreno driver it works on 7.1.2 February 2016 is the last stable adreno driver for nexus 4
Here is link for the February 2016 driver
https://www.androidfilehost.com/?fid=24459283995300671
The adreno driver works for 6.0 through 7.1.2
awesome thanks
donz_Simon said:
Please open thread in nexus 5 too for this really​ AOSP rom
Click to expand...
Click to collapse
Soon! our Nexus 5 maintainer (I don't have a Nexus 5, 4 is still my daily driver) just fixed a camera bug, according to him, only some selinux fixes are remaining until the thread can be opened
Hi again, loving the rom so far and thx very much for keeping the n4 alive! I understand the rom will not have any custom rom features since it's strictly AOSP, but I wonder if it might be possible to include ambient display? It is too useful for the screen to automatically turn on without having to press power button which many n4 owners probably have problems with, and to see notifications in a dimmer black and white screen that is unobtrusive which can return to full brightness and colour with a touch of the screen.
Thx again and very grateful for your work for the n4 community!
Thanks for your hard work and this great and very stable ROM @Ziyan :good:

[ROM][8.1][A3 2016] ResurrectionRemix 6.2.1 for Galaxy A3 2016 | a3xelte | SM-A310xx

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Galaxy A3 2016 | a3xelte | SM-A310xx
UNOFFICIAL | Android 8.1
Download: HERE​
Changelog:
Code:
[COLOR="Teal"]2019-02-08[/COLOR]
- Upstreamed new Kernel again from v3.10.61 to 3.10.108 for enhanced security and performance
- Fixed audio recording issue by not allowing to record with a bitrate below 48000 in the audio policy
- Updated stock vendor blobs from CRG1 to CRH1 for better security and stability (this time it mostly improved GPS)
- Fixed bluetooth calling
[COLOR="Teal"]2019-01-30[/COLOR]
- Initial release
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Click to expand...
Click to collapse
Installation instructions:
1. Make sure you have TWRP installed on your device to be able to flash the rom.
2. Download the latest build from the link above and copy it to a place where you can find it later.
3. Optionally download GApps for using the Play Store and other Google related services from here: https://opengapps.org. Choose ARM as architecture and 8.1 as the OS version. The size of the GApps package is upon to you how much apps you want to have preinstalled. Copy this zip aswell to a place where you can find it easy later. If you download it with Chrome or with the Google Drive App it should be by default in the Download folder.
4. Turn your phone off and press Volume UP + Home Button + Power button at the same time until the splash screen appears. Then your device should boot into the recovery. There you wipe following partitions: Data, System, Cache, Dalvik if this is your first install. All of your installed applications get lost by this. Your photos, videos etc. won't get deleted if you haven't ticked the box for internal storage. As the kernel also supports F2FS i would change the filesystem for the cache partition from ext4 to f2fs for a better system performance. Now go to the main TWRP menu, click on install and go to the place where you have placed your zips and first select the rom and then click on the left button if you have downloaded the optional GApps package to add another zip to the queue. Now swipe the slider at the bottom to install and reboot the phone to the system. The first boot can take a while and after booting you could experience some lags because of the GApps initialization but they should disappear after some time.
5. Now you have successfully installed the rom and you're ready to use ResurrectionRemix on your device. Congratulations!
Bugs:
- VoLTE (isn't working on samsung devices and won't work anytime in the future too)
- Same as LineageOS 15.1
Credits:
@danwood76 for maintaining the a3xelte device tree
@Stricted for maintaining the common device tree
Contributors:
@Borduni
Source Code:
https://gitlab.com/dariotrombello
https://github.com/ResurrectionRemix
https://gitlab.com/Exynos7580
Version Information
Android: 8.1 Oreo
Kernel: Linux 3.10.108
Status: Stable
Stable Release Date: 2019-30-01
Created: 2019-30-01
Last Updated: 2019-02-08
reserved
Many thanks:good:
I would just like to thank @Borduni @danwood76 @Stricted and all the devs that are helping maintain our device and bringing us updated ROMs! This was a rom i was wishing for very much! Thank you for all your efforts and time dedicated for us.
4-core processor or 8-core processor?
If 8 core enabled, can we get 4 core enabled version?
Also thank you all of you guys for still developing for A310F users. I wish i can donate for you guys but PayPal is not avalaible in our country.
senemir said:
4-core processor or 8-core processor?
If 8 core enabled, can we get 4 core enabled version?
Also thank you all of you guys for still developing for A310F users. I wish i can donate for you guys but PayPal is not avalaible in our country.
Click to expand...
Click to collapse
Quad Core Kernel. I won't publish any of my new roms with Octa Core Kernel's because of the high battery drain.
You don't need to donate me anything. I don't even have set up PayPal :laugh:.
Borduni said:
Quad Core Kernel. I won't publish any of my new roms with Octa Core Kernel's because of the high battery drain.
You don't need to donate me anything. I don't even have set up PayPal :laugh:.
Click to expand...
Click to collapse
Thanks bro. I will try this rom tomarrow.
And i dont like Octa Core too. Phone overheats and battery drain is too much like you said.
Keep up that great work !
Does sound work in all apps? I've used three other 8.0 roms and they all recorded mic very quietly in apps like Snap and Insta.
hajdud said:
Does sound work in all apps? I've used three other 8.0 roms and they all recorded mic very quietly in apps like Snap and Insta.
Click to expand...
Click to collapse
This will be fixed soon, it's on my list
2019-02-08
- Upstreamed new Kernel again from v3.10.61 to 3.10.108 for enhanced security and performance
- Fixed audio recording issue by not allowing to record with a bitrate below 48000 in the audio policy
- Updated stock vendor blobs from CRG1 to CRH1 for better security and stability (this time it mostly improved GPS)
- Fixed bluetooth calling
As I see this rom audio recording is working fine right? I had another issue with L15.1 which was that I couldn't get faceunlock to work at all, it didn't even show up in the setings. It wasn't the gapps cause I use those same gapps on extendedAOSP and it worked. Also at some point the mic stopped working, etheir for calls nor audio recording. I'm on 14.1 now but it doesn't play flac natively and the music player I use doesn't support flac by itself, all the rest is great en 14.1. So, if anyone is kind enough to advice me about this ROM that'd be great, I'm getting a little tired of flashing, mostly because I need the phone for work during the day and the microphone dying is not cool XD Thanks in advance.
LucasNerv said:
As I see this rom audio recording is working fine right? I had another issue with L15.1 which was that I couldn't get faceunlock to work at all, it didn't even show up in the setings. It wasn't the gapps cause I use those same gapps on extendedAOSP and it worked. Also at some point the mic stopped working, etheir for calls nor audio recording. I'm on 14.1 now but it doesn't play flac natively and the music player I use doesn't support flac by itself, all the rest is great en 14.1. So, if anyone is kind enough to advice me about this ROM that'd be great, I'm getting a little tired of flashing, mostly because I need the phone for work during the day and the microphone dying is not cool XD Thanks in advance.
Click to expand...
Click to collapse
Most audio issues are fixed in the latest version.
RR should be as stable as my Lineage OS builds as it is based on my trees. Only current issue is buggy MTP but this will be mostly solved in our kernel tree soon.
RR-Pie-v.7.0.1 is coming soon
Hi,
(This is my first post on xda, so I'm not sure I'm doing it right. Tell me if I should do it differently so I learn)
I like this rom, and have used it in various versions of several devices, so I'm happy to see it is developed for this device too.
However, when i try to flash it to my SM-A310F, I get the error that this rom is for a3xelte, while my device is (blank space) .
I use TWRP v. 3.0.2.1 and have flashed the revolution OS rom with success. This rom works ok, but I just miss some the customizations and functionalities in RR.
-And also the lack of samsung software, which I use none of and just disable.
I general, I can install roms which are based on the stock samsung rom in some way or another (like the revolution OS), but not roms like RR, dotOS or lineages.
From Software settings (running revolution OS):
Baseband: A310FXXU2BPG6
Kernel version: 3.10.105-NOUGAT-ALX-0.0.2
So, do any of you clever people have a good idea why my SM-A310F is not considered worthy for RR? Is there a way to flash it anyway, or is this a hardware issue of some sort?
And thanks!
Bobbobelob said:
Hi,
(This is my first post on xda, so I'm not sure I'm doing it right. Tell me if I should do it differently so I learn)
I like this rom, and have used it in various versions of several devices, so I'm happy to see it is developed for this device too.
However, when i try to flash it to my SM-A310F, I get the error that this rom is for a3xelte, while my device is (blank space) .
I use TWRP v. 3.0.2.1 and have flashed the revolution OS rom with success. This rom works ok, but I just miss some the customizations and functionalities in RR.
-And also the lack of samsung software, which I use none of and just disable.
I general, I can install roms which are based on the stock samsung rom in some way or another (like the revolution OS), but not roms like RR, dotOS or lineages.
From Software settings (running revolution OS):
Baseband: A310FXXU2BPG6
Kernel version: 3.10.105-NOUGAT-ALX-0.0.2
So, do any of you clever people have a good idea why my SM-A310F is not considered worthy for RR? Is there a way to flash it anyway, or is this a hardware issue of some sort?
And thanks!
Click to expand...
Click to collapse
You need to update TWRP. Here you find the latest official build: https://eu.dl.twrp.me/a3xelte
And also you could do a baseband update. Flash the newest firmware for your country via ODIN and install TWRP and RR after that again.
I recommend you to use RR 7 (Android 9) instead of this. I haven't published a build since a long while.
Thanks so much for the very quick response! I will give both a try starting with updating twrp. I'm not sure where to look for the baseband update, but I will try to find it if twrp update does not work.
Bobbobelob said:
Thanks so much for the very quick response! I will give both a try starting with updating twrp. I'm not sure where to look for the baseband update, but I will try to find it if twrp update does not work.
Click to expand...
Click to collapse
You can use the tool samfirm (google it) or updato.com
Baseband updates can improve signal strength/battery life. But it is not necessary.
Thanks again, I really appreciate your help.
I'd love to try RR7, but I can't find the download link in the relevant thread (it says removed by OP) or in the RR homepage. Therefore I chose this version instead. Is RR7 available somewhere else.
https://forum.xda-developers.com/sa...m-rr-7-0-1-galaxy-a3-2016-a3xelte-sm-t3919153

[ROM] LineageOS 18.1 UNOFFICIAL - 1.0 [2021-01-17]

LineageOS 18.1 for Sony Xperia XZ1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RELEASE
This is an alternative ROM for the Sony Xperia XZ1, offering several privacy features.
Please report any issues you observe apart from the ones listed below. Logs are needed for me to fix anything (preferably dmesg and logcat). I can't test NFC very thoroughly, to please report your findings.
FEATURES
Signed with dev keys
Up-to-date kernel
WireGuard kernel support
DOWNLOAD
You can download the latest releases here:
poplar (G8341):
twrp-3.5.0-0-20210117-poplar
lineage-18.1-20210117-UNOFFICIAL-1.0-poplar
poplar_dsds (G8342):
twrp-3.5.0-0-20210117-poplar_dsds
lineage-18.1-20210117-UNOFFICIAL-1.0-poplar_dsds
poplar_canada (G8343):
twrp-3.5.0-0-20210117-poplar_canada
lineage-18.1-20210117-UNOFFICIAL-1.0-poplar_canada
Check the ChangeLog below for firmware requirements!
INSTALLATION
Put the zip file of the ROM on your sdcard or internal storage, boot into recovery and flash. When coming from stock: boot into TWRP, format data, reboot to recovery and wipe all internal partitions. Then flash the ROM, GApps (if needed) and root (if needed).
Note: There is not going to be a LOS su addon anymore. If you need root, flash a root manager of your choice. No guaranteed support from LOS for this.
When updating from builds, simply dirty flash the ROM.
If coming from 17.1, please see advice below in second post ("UPGRADE LINEAGEOS").
KNOWN ISSUES
WFD is not working yet (waiting for new non-BSP blobs)
Stock camera is not working anymore due to incompatibility of stock library (libimageprocessorjni.so) with new libgui
You tell me...
Contributors
derf elot, modpunk, Rooted_Ansh
Thanks to the testers
coin3x, feduss, GiaSen, Gizanagi, hsheemi, kaancaliskan, sohrab1985
Source Code
poplar: https://github.com/whatawurst/android_device_sony_poplar
poplar_dsds: https://github.com/whatawurst/android_device_sony_poplar_dsds
poplar_canada: https://github.com/whatawurst/android_device_sony_poplar_canada
kernel: https://github.com/whatawurst/android_kernel_sony_msm8998
Rom Information
ROM OS Version: Android 11
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2021-01-17
Thread Information
Created 2021-01-17
Last Updated 2021-01-17
SECURITY ADVICE
Don't flash ROMs or Magisk modules which set SELinux to permissive or you welcome malware on your device!
UPGRADE LINEAGEOS
I have not tried upgrading the device from 17.1 and cannot guarantee that it will work - you should do a backup just in case. If things go wrong, flash it as if coming from stock (see instructions in OP).
The following steps should work though:
Flash new twrp and boot into it
Flash new rom, opengapps and any updated root solution you use
Optional: Clear cache
Reboot
Note: When updating form Lineage 17.1, you maybe have to once change your preferred network type from 3g back to 4g/LTE.
UPGRADE FIRMWARE
Grab the Sony Stock firmware using e.g. XPeriFrim. You should always flash the firmware matching the LOS build.
Grab newflasher and put it in the same folder as the firmware files.
Read the newflasher original post on XDA for general instructions!
Remove the following from the folder so they won't get flashed:
all *.ta files (keep the one in the boot/ directory)
cache*.sin
fotakernel*.sin
kernel*.sin
system*.sin
userdata*.sin
vendor*.sin
Turn off your phone
Hold the volume down button and attach it via USB to your system till you see LED turning green
Run newflasher from within this directory to flash the remaining files
You can say yes to the first optional step, in case you don't have working drivers installed.
Skip the second optional step (dumping of trim area), it's useless if your bootloader is unlocked already and takes a long time.
How to get root?
As mentioned before, there will not be an official su addon from LOS anymore. If you need root, flash an unofficial solution.
Google Apps
You can download and install the Google Apps from opengapps.org. You need ARM64 and 11.x. I suggest to *always* use the pico or nano package. If you need additional apps you find them in the Play Store.
Open GApps for Android 11 is still in beta. You can download those releases here
MicroG
This ROM doesn't support Signature Spoofing. However we are watching MicroG and check if they provide newer builds e.g. for Android 11.
REQUIRED FIRMWARE: 47.2.A.11.228
CHANGELOG
2021-01-17 | 1.0| 47.2.A.11.228
Initial release
Thanks @derf elot ! For all your and the rest of the Dev team's efforts.
What can we (the community) do to help get the camera back up and running?
Ok THIS WAS THE BEST BIRTHDAY PRESENT EVER... I'll test it asap
ZombieLinux said:
Thanks @derf elot ! For all your and the rest of the Dev team's efforts.
What can we (the community) do to help get the camera back up and running?
Click to expand...
Click to collapse
Unfortunately, I am not sure there is much that we can do. The stock library that we need for the stock camera app to work properly (libimageprocessorjni.so) is not liking the new Android 11 libgui. We (also with the help of @j4nn ) tried to fix these issues in various ways, including shimming and forcing the use of the 10 libgui but haven't managed to get it working properly yet. Maybe we'll have a crack at it again at some point, but I wouldnt get my hopes up too much. It also doesn't help that the XZ2/3 series is not getting an official Android 11 update. Opencamera is a decent alternative, although it does lack some of the stock camera options.
JimKatsanos said:
Ok THIS WAS THE BEST BIRTHDAY PRESENT EVER... I'll test it asap
Click to expand...
Click to collapse
Happy birthday. I hope you enjoy
Oh nice, and I just got the device today (new and unopened) but for some reason I can't flash it to a different or use even the official tool from Xperia to "repair" my software.
First thing I'll do after upgrading will be checking this rom.
Thank you a lot!
Hello, nice job.
Smooth fresh install rom+Nikgapps, everyhing works nice,
but time to time phone call was inposible - calling stops in a 0 seconds.But i still was able receive phone calls. After receiving call - i can make a call for few times.Sorry can't provide any logs - use this phone as my main daily device, so quickly return to my previous rom (resurrection remix 8.6.4), where everything running well.
dzenius said:
Hello, nice job.
Smooth fresh install rom+Nikgapps, everyhing works nice,
but time to time phone call was inposible - calling stops in a 0 seconds.But i still was able receive phone calls. After receiving call - i can make a call for few times.Sorry can't provide any logs - use this phone as my main daily device, so quickly return to my previous rom (resurrection remix 8.6.4), where everything running well.
Click to expand...
Click to collapse
It's just working fine here with opengapps beta. Mostly likely nikgapps broke dialer app.
kaancaliskan said:
It's just working fine here with opengapps beta. Mostly likely nikgapps broke dialer app.
Click to expand...
Click to collapse
Can You tell me, where can i get opengapps for android 11?
dzenius said:
Can You tell me, where can i get opengapps for android 11?
Click to expand...
Click to collapse
Please read the OP's. There is a link in the 2nd post.
derf elot said:
Please read the OP's. There is a link in the 2nd post.
Click to expand...
Click to collapse
Thanks.Will download, flash and report on weekend.
dzenius said:
Hello, nice job.
Smooth fresh install rom+Nikgapps, everyhing works nice,
but time to time phone call was inposible - calling stops in a 0 seconds.But i still was able receive phone calls. After receiving call - i can make a call for few times.Sorry can't provide any logs - use this phone as my main daily device, so quickly return to my previous rom (resurrection remix 8.6.4), where everything running well.
Click to expand...
Click to collapse
I also tried Nikgaaps (full version from 12/30/2020) and I don't have this issue. Maybe you used a different version or build.
NOICE
Rom really smooth & gaming as same or maybe better than stock.
Thank You for the great work.
everything works fine, nfs too
The carrier profile can use the files from XZ3(oem.sin).XZ1 stop updating very early,XZ3 is constantly being updated.
The carrier which are China Unicom and China Telecom used is from XZ3(oem.sin).
This file is modified according to XZ3.(by iovf and 沙河新基金啊)
LYSZY6 said:
The carrier profile can use the files from XZ3(oem.sin).XZ1 stop updating very early,XZ3 is constantly being updated.
The carrier which are China Unicom and China Telecom used is from XZ3(oem.sin).
This file is modified according to XZ3.(by iovf and 沙河新基金啊)
Click to expand...
Click to collapse
I have added support for both of these internally, so a custom OEM should not be needed anymore. I know at least of one person where it's working on maple. is it not working for you?
derf elot said:
I have added support for both of these internally, so a custom OEM should not be needed anymore. I know at least of one person where it's working on maple. is it not working for you?
Click to expand...
Click to collapse
I'm sorry. I just found this option in Settings. It seems to work.
Thank you again for your reply.
By the way,are there any plans to add volte video calling?(This is not a requirement.)
Gesture Navigation (1st option) seems buggy sometimes especially while playing game bottom bar appears in center & (in landscape) bottom screen touch not response.

[ROM] LineageOS 20.0 UNOFFICIAL - 1.2 [2023-05-06]

LineageOS 20.0 for Sony Xperia XZ1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RELEASE
This is an alternative ROM for the Sony Xperia XZ1, offering several privacy features.
Please report any issues you observe apart from the ones listed below. Logs are needed for me to fix anything (preferably dmesg and logcat).
DOWNLOAD
You can download the latest releases here:
poplar (G8341):
https://sourceforge.net/projects/yoshino/files/poplar/twrp/
https://sourceforge.net/projects/yoshino/files/poplar/lineage-20.0/
poplar_dsds (G8342):
https://sourceforge.net/projects/yoshino/files/poplar/twrp/
https://sourceforge.net/projects/yoshino/files/poplar/lineage-20.0/
poplar_canada (G8343):
https://sourceforge.net/projects/yoshino/files/poplar/twrp/
https://sourceforge.net/projects/yoshino/files/poplar/lineage-20.0/
poplar KDDI (SOV36)
https://sourceforge.net/projects/yoshino/files/poplar/twrp/
https://sourceforge.net/projects/yoshino/files/poplar/lineage-20.0/
RECOMMENDED GAPPS (others works too)
https://androidfilehost.com/?w=files&flid=322935
INSTALLATION
Before first install: flash and boot into the TWRP provided in this thread, format data, reboot to recovery and wipe all internal partitions, then flash the ROM, GApps and root (if needed).
Note: There is not going to be a LOS su addon anymore. If you need root, flash a root manager of your choice. No guaranteed support from LOS for this.
When updating from previous builds, simply dirty flash the ROM is enough, decryption in new TWRP works now
Recommended GApps: MindTheGapps provided in this thread.
KNOWN ISSUES
Stock camera is not working anymore due to incompatibility of stock library (libimageprocessorjni.so) with new libgui
Currently, LOS isn't feature complete yet, so some things, buttonn, advanced menù etc. may be still missing
You tell me...
Contributors
derf elot, modpunk, Rooted_Ansh
Source Code
poplar: https://github.com/whatawurst/android_device_sony_poplar
poplar_dsds: https://github.com/whatawurst/android_device_sony_poplar_dsds
poplar_canada: https://github.com/whatawurst/android_device_sony_poplar_canada
poplar_KDDI: https://github.com/whatawurst/android_device_sony_poplar_kddi
kernel: https://github.com/whatawurst/android_kernel_sony_msm8998
Rom Information
ROM OS Version: Android 13
ROM Kernel: Linux 4.4
Version Information
Status: Stable
Current Stable Version: 1.2
Stable Release Date: 2023-05-06
ALL CREDITS TO DERF ELOT AND THE OTHER DEVS BEHIND THE ROM, I'M ONLY POSTING IT.
---------------------------------------
Changelogs:
v1.2 (2023-05-10):
- Updated to T QPR2 release (LineageOS upstream)
- Updated to May 2023 Security updates (both ROM and kernel)
- Our kernel now includes updates by CIP and is up-to-date with tag st40 - thanks also to Flamefire for help with some of these (1)
- Reduced zram size to 25% (1gb) of out total RAM to have more to use freely
- Updated BT stuff for QPR2 (maybe offloading is working again? needs confirmation)
- Added the option to reflash the mbn via OpenCS (see Xperia Parts) - thanks also to shank03 & Flamefire (2)
- Fully enabled IMS on Congstar Germany via overlay on lilac
- Possibly some battery/performance optimizations here and there
- Fixed Android Auto support
- Added new LineageOS "Charging control hal" for battery charging care (3)
- Maybe more I forgot...
(1) The CIP kernel includes fixes for issues and security vulnerabilities from 4.14 kernel (see https://git.kernel.org/pub/scm/linux/kernel/git/cip/linux-cip.git)
(2) A somehwat lengthy explanation: This option is off by default on fresh installs. When upgrading, this should be enabled because we enforced this for everybody previously. However, this option is only required for certain carrier mbns that enable IMS. Personally, I know that the O2/Telefonica Germany mbn needs this, otherwise you get a crashing modem at every boot (unless you switch to 3g before rebooting and back to LTE after boot). I generally recommend playing with this option, and if you don't need it (e.g. modem doesn't crash on boot), just keep it off - like mentioned before, this is now the default behavior of OpenCS on fresh installs anyway.
(3) This is not finalized or merged upstream is LineageOS yet, but seems like a nice feature to have and test drive already. Some bugs may be possible.
v1.1 (2023-01-08):
Updated to T QPR1 release (LineageOS upstream)
New default camera app (LineageOS upstream) - yes, we cannot change video fps currently (thanks Sony!)
Any other updates by LineageOS upstream
Kernel security updates (also thanks to Flamefire)
Dropped keyprovd service - it is useless on unlocked BL anyway
Show 4G instead of LTE icon - saves some space too
Enable IMS by default - this still only works if carrier is supported
Fix some selinux denials (also thanks to Flamefire)
Fixup ViLTE dependencies - this might in theory work again, but it's not enabled yet
v1.0 (2022-10-02):
Initial release
Can’t wait to try it !!! Thanks tux
Can i flash this using old twrp version like 3.6.2 - 9?
The rom is great but every time the device reboots and finishes the boot animation it repeats one more time boot animation.
According to the picture, I can't scroll down as usual, can only use those 4 buttons @@ until rebooting (I had landscape rotation to watch youtube then rotate the screen again when the video ends and it's like that
).
rarely but the sound doesn't play even if i keep the volume high or switch to listening to music or watching youtube until the device is restarted
(sorry if I said wrong or wrong grammar, I'm not very good at English. )
raffyei8ht said:
Can i flash this using old twrp version like 3.6.2 - 9?
Click to expand...
Click to collapse
No idea, but for internal memory decription the new one is needed.
Tux111 said:
No idea, but for internal memory decription the new one is needed.
Click to expand...
Click to collapse
What is the use of internal decription if you don't mind me asking
raffyei8ht said:
What is the use of internal decription if you don't mind me asking
Click to expand...
Click to collapse
By default android protect (encrypt) your internal memory. TWRP lacked decryption for a long time, now its supported. This means, with new recovery, you can see and manage your internal memory via TWRP using your lockscreen password. Before, you simply can't.
The fingerprint sensor doesn't work, auto brightness is also not working, does anyone know how to fix it
Each time I reinstalled a rom, some function which worked just fine on that rom stopped functioning, do you guys know how to prevent this
This is a very good ROM. Good for daily use. Didn't encounter any problem. Can't wait for the Pixel Experience Android 13.
ecrissor said:
The fingerprint sensor doesn't work, auto brightness is also not working, does anyone know how to fix it
Click to expand...
Click to collapse
FP perfectly working.
ecrissor said:
Each time I reinstalled a rom, some function which worked just fine on that rom stopped functioning, do you guys know how to prevent this
Click to expand...
Click to collapse
I guess you have some missing files or something like that. Try reflashing stock rom and persist.img, something wrong with your files.
Maybe this is a dumb question, but what is the difference between the twrp provided here and the 'stock' twrp from twrp.me? Will both work?
Nice room
great work
poplar_dsds said:
Maybe this is a dumb question, but what is the difference between the twrp provided here and the 'stock' twrp from twrp.me? Will both work?
Click to expand...
Click to collapse
Both works but this one should be able to decrypt internal memory. No idea if the one from twrp.me does the same or if its the same file.
Tux111 said:
Both works but this one should be able to decrypt internal memory. No idea if the one from twrp.me does the same or if its the same file.
Click to expand...
Click to collapse
Okay i see, thank you! I updated to your version of twrp and dirty flashed the rom from 19.x to this version, worked great, even with apps and so on!
Also thanks for the ROM!
Hi there,
I'm a complete noob on XDA, but I just flashed this TWRP (twrp-3.6.2_12-0-20221002-poplar) over another TWRP (twrp-3.7.0_9-0-poplar) and now, when entering recovery mode I get stuck in loading screen of teamwin Recovery Project 3.6..2_12-0
I can get out of loading screen by pressing all buttons, and device turns off.
I rebooted into fastboot and flashed back the 3..7 TWRP and now things are back to normal.
Any sugestions on what I can do to install this TWRP?
xdatomsgmail said:
Hi there,
I'm a complete noob on XDA, but I just flashed this TWRP (twrp-3.6.2_12-0-20221002-poplar) over another TWRP (twrp-3.7.0_9-0-poplar) and now, when entering recovery mode I get stuck in loading screen of teamwin Recovery Project 3.6..2_12-0
I can get out of loading screen by pressing all buttons, and device turns off.
I rebooted into fastboot and flashed back the 3..7 TWRP and now things are back to normal.
Any sugestions on what I can do to install this TWRP?
Click to expand...
Click to collapse
So, I was able to install lineage-20.0-20221002-UNOFFICIAL-1.0-poplar.zip from this post using TWRP 3.6..2_12-0, without problems.
Did not try to flash twrp-3.7.0_9-0-poplar again.
Is there a thread with future requests? I would like the default browser not to default to google, as the whole point for me is to de-google my phone.
Hi, so I've been absent from Custom Roms for the last couple years - since I got my XZ1 and the DRM key extraction was too much of a hassle for me as I didn't miss much from the stock rom.
Since I got some spare time over the years I was thinking to finally tackle that topic, but I have two questions:
1) The opening post says this
Tux111 said:
Stock camera is not working anymore due to incompatibility of stock library (libimageprocessorjni.so) with new libgui
Click to expand...
Click to collapse
is it even still relevant for me to back up my DRM keys / back up the TA partition if I don't want to go back to stock? what camera are you using then? is the quality comparable? is slow motion still possible?
2)
i know that in the past, safety net checks were just looking for bootloader / root, but they changed to checking if the ROM is signed with a proper signingkey, right? is this rom signed with a non-test-key?
I've got a couple of banking apps on my phone and it would obviously prevent it from being a daily driver if they were not supported anymore :/
Thanks in advance!
New LOS Update 1.1 is here! Enjoy!
xdatomsgmail said:
So, I was able to install lineage-20.0-20221002-UNOFFICIAL-1.0-poplar.zip from this post using TWRP 3.6..2_12-0, without problems.
Did not try to flash twrp-3.7.0_9-0-poplar again.
Is there a thread with future requests? I would like the default browser not to default to google, as the whole point for me is to de-google my phone.
Click to expand...
Click to collapse
By default the browser isn't Google Chrome afaik, so i don't see the problem. Also, tbh, this makes no sense considering Android=Google. Chromium is builded inside the ROM,is part of the ROM,so once you install Android, you are installing something from Google. So i don't get it.
If you don't install gapps, then you don't have Chrome as default browser. Otherwise, flash gapps and remove Chrome.

Categories

Resources