How get functions of touchkeys and steering wheel control back? - MTCB Software Development

Hi,
can anyone help me with my big problem please.
First here is the config of my radio. Its the same now like it was when i got it from Autopumpkin.
Only Dates were newer and MCU was MTCB-KLD6-V2.81
But now, after updating MCU to MTCB-KLD6-V2.83 my Touchkeys of my Device and the wheel steering control of my VW Golf GTI are not working anymore.
The Display of my car just says NaviSystem. But nothing works.
What can i do to fix this problems?
I tried to get the MTCB-KLD6-V2.81 but i cant find it anywhere
Hope someone can help me here :good:

im not sure, but if u can get into the factory setting menu go and chk if u r choosing the correct canbus

Probably in factory settings (pw 126). There is a canbus setting there that might have got reset.

Hi
Any update on this problem, I have same unit with same issue but without steering wheel controls. Volume up & down, Nav , power button & back are none responsive.
Love the new Rom, much better than stock but I just need to get these buttons working

Related

Make the phone free-hand

Hello,
As the mic and the speaker are enough strong to record and play mp3.
I was wondering why you don't have a function free-hand with the cellular phone? Does it exist a soft or something else to make that possible?
Thaks for your answer
if you mean speakerphone then holding down the pickup phone key for a few settings turn it on or at least thats what my manual say
yesss it's working, thanks a lot
I don't have that ICON
I don't have the phone icon. Do I have to enable it?
Let me know
Its the same green phone key you use to make a call bottom left of the xda.

ringtone , system volume booster?

is there a hack or program or w/e to increase the volume of the ringtone and the system in general. i work in a very noisy environment and its so hard to hear any incoming calls even at home so imagine at work... thank you.
anyone please?
Try this http://forum.ppcgeeks.com/showthread.php?t=41385
I use the low booster and it works fantastic for both normal ear piece use and also using my BT head set.
thank you very very much!
NP, Glad I could help....
I tried that file, and it trashed my phones ability to use the stock volume controls with the side buttons. Be careful, and make sure you back up.
TheDempster said:
I tried that file, and it trashed my phones ability to use the stock volume controls with the side buttons. Be careful, and make sure you back up.
Click to expand...
Click to collapse
I'm using that file and nothing has happened to my volume buttons. The only issues I have come across with my volume buttons had to do with the latest version of s2u2 (v1.35). I went down to v1.33 and regained function of my buttons again.

dopod 838pro - lost some button functions

Since the little fella played with my phone - I have not been able to utilise some of my buttons on the phone.
Firstly he was playing a game - thus I thought he reconfigured the phone - so I hard reset the device
I have also pulled it completely apart - cleaned and put back together - same problem as previous
Have now reloaded its working rom from my backup version and still not functioning
I assume now its a hardware fault
Buttons not working are
Message centre (Top LHS)
IE button (Top RHS)
Start menu button
Talk button - green
Hang up button - red
OK button
Tried chasing a schematic for the phone but no cigar
Can anyone direct me as to where the likely issue may be
ie: Main board, within the headset/lcd unit
components etc on the boards
Appreciate any info re-fixing the problem
cheers
O

Hardware buttons for volume control no longer work...

Hey guys, thanks for the help in advance! I have had my tp for 2 weeks now and i love it... i did install a few things like a cab for improving battery life found on ppc geeks website, i also edited the registry to allow me to tether it to my laptop, changed sending text messages so the annoying text sent message doesn't pop up, and finally changed the reply all to just reply when replying to email messages. aside from that i've installed a few apps like google maps, sensorlock, the flip clock (which i removed), fring, tiny twitter, and a weather database editor for the weather thing....
ok now that's all out of the way... somewhere along the way i've lost the ability to change the volume using the hardware buttons. when sitting at the home screen if i press the volume up, the big volume thing opens with the 2 options at the bottom for vibrate and silent, but if i press the volume up or down again, this screen dissapears and does not change the volume. i am still able to change the volume using my finger or the stylus, but this is annoying if i'm on a call or using my bluetooth headset.
i noticed yesterday that if my volume is all the way up and i press down on the volume button, the volume screen goes away like it has been, but highlights the clock, if i press it a few more times it highlights the next thing down (the call log) and again it selects the upcoming calendar events... eventually it minimizes the clock alltogether... this also happens when i press the arrow down.
i'm positive this has something to do with a registry hack or something i've installed, but i have finally got everything setup the way i like it, is there any way this feature can be restored??
bonneyt said:
i'm positive this has something to do with a registry hack or something i've installed, but i have finally got everything setup the way i like it, is there any way this feature can be restored??
Click to expand...
Click to collapse
Well you know the problem. You have two options. Hard reset or find the specific tweak or App that fiddled with the volume buttons.
Did you install anything like AE Buttons plus or anything else?
no, i haven't installed anything that affects buttons. i did do a hard reset, and installed only the things i knew work. everything was fine so i decided i would try a registry trick to allow me to use my tp as a means to access the internet... it worked fine but then i got a call and attempted to turn down the volume and it didn't work again.
i guess my question is, what/where is this controlled? is it something i can re-install? is there an alternative i can install?
bonneyt said:
no, i haven't installed anything that affects buttons. i did do a hard reset, and installed only the things i knew work. everything was fine so i decided i would try a registry trick to allow me to use my tp as a means to access the internet... it worked fine but then i got a call and attempted to turn down the volume and it didn't work again.
i guess my question is, what/where is this controlled? is it something i can re-install? is there an alternative i can install?
Click to expand...
Click to collapse
What happened when you tried to turn down the volume. Please be very specific. The small details will matter on this one.
But one guess... You dsisabled the phone skin.
ok, when pressing volume down one time the volume screen comes on (this is the touch flow 3d volume thing) if i press volume down again to decrease the volume, the screen previously mentioned goes away and highlights the first today screen item, in this case it's the clock.
i have done some troubleshooting of my own... it doesn't seem that it's caused by anything i've installed or tweaked... i did a hard reset, and didn't install anything but went straight to the internet sharing app that comes installed on the tp. i tried to connect with usb, it failed and gave an error message (this is to be expected) but now i can't use the volume buttons... i've narrowed it as far as i can. i can do another hard reset, install all my apps and tweaks again and just avoid the internet sharing piece, but i kindof want that to work too. i would be satisfied to just fix the volume button problem and not try the internet sharing again if it's possible
edit: if the phone skin is disabled, how would i go about re-enabling it?
edit2: i did another hard reset, again didn't install anything this time... i decided i wanted to browse the internet, so i opened opera and it gave me a connection error (i'm in roaming) i dismissed the error and at the same time lost the ability to volume up and down............ any ideas?
Just an update in case anyone was following this
the dialer skin and the volume thing are totally seperate, i know this becuase i went into the registry and disabled the dialer skin to show the winmo default... the volume skin/app stayed the same.
i contacted htc support, the guy i spoke with claimed it to be a hardware issue... i refuse to believe that. this is clearly a software issue/bug
when doing a soft reset i can hit the hardware volume keys up and down before everything finishes loading and the default windows volume sliders appear and they work, but whenever the other volume program loads i can't get back to the windows default.
any help is greatly appreciated, i really don't want to replace my phone for something i know isn't a hardware issue
thanks for all the help but... i have figured out the problem... .net framework 3.5 is what's causing the volume "skin" to stop working... this is installed by default (at least on my phone) and is required to run certain apps (also previously installed)... i've notified htc... they said woops and that's about it
i was able to remove it or at least disable it with the tech's help, some apps wont work and i've noticed the weather app works sometimes and other times not at all. so if anyone else in the world is having this issue... get rid of .net framework v3.5
edit:thank you scrosler, for being the only one that even attempted to help me, you pointed me in the right direction!
i am having the same problem. i'll have to try removing the .net framework and see if that fixes my problem.
i should probably first figure out what apps are going to break if the framework is removed....

[Q] AVRCP in sleep mode

Hi guys!
I have a problem with my headset and new Star x920 phone.My headset is A2DP with AVRCP buttons. There is no problems when screen is swithed on. But when phone has gone sleep and I try to play/pause track noothing happens. If I try to switch to next or previous track it works fine.
I tried to debug this with ADB. I look to logcat output and see that key codes arrives in phone in both modes. But when phone is sleep mode there is no reaction on that key codes.
Also I inspected key layout file /system/usr/keylayout/AVRCP.kl and WAKE option is present on desired keys.
So I don't know what to do now to fix my problem. Can anyone help me? Thank you!

Categories

Resources