How to enable usb debugging a phone in boot loop sasung galxy ace ss5830i
No recovery mode and odin dont recognize it
I have had the same problems!
To fix the bootloop follow theese steps:
1. Open recovery mode (hold Vol Up + Home button + Power button)
2. Select wipe data/factory reset and select yes
3. Select wipe chache partition
4. Turn off the phone removing the battery and putting it back.(do not press reboot system now)
5. Download theese stuff: mediafire.com/ download/ ng6uzcd22p7qunu/ S5830i.rar
6. Extract it somewhere
7. Open the folder (Odin with pit)
8. Open Odin3_v1.84
9. Turn your phone on download mode (hold the Vol Down + Vol Up + Power button until you see warning screen OR black screen)
10. Connect your phone to your computer with usb
11. Press the Volume Up button on your phone
12. Go to Odin and click on the button Pit. Select the pit file (Odin with pit\cooperve_0623.pit)
13. Click on bootloader and select (DefaultCalDataWithBoot_S5830iXXLB1_REV00.tar.md5)
14. Click on PDA and select (PDA_S5830IXXLA4_REV00.tar.md5)
15. Click on Phone and select (MODEM_S5830iXXLA2_REV00.tar.md5)
16. Click on CSC and select (GT-S5830i-MULTI-CSC-OXXLA2.tar.md5)
17. Press the start button on Odin
18. Wait until done!
Happy new android!
Related
Hi So I am stuck in download mode when I tried to root my Fascinate with odin today it got a fail 1 success 0. I have tried holding down the power button for 10 seconds and a battery pull to no avail. Help would be greatly appreciated.
I would suggest that you get a .pit and re partition while you are going back to stock.
Omniscient S said:
I would suggest that you get a .pit and re partition while you are going back to stock.
Click to expand...
Click to collapse
Thank you for responding but I have not rooted yet the problem occurred when I was trying to root.
are you following the [GUIDE] from droidstyle?? Section 6
Section 6: How to root stock froyo or gingerbread(This is not needed if your flashing a custom rom)
Downloads these files to PC,
Samsung drivers-
Odin (computer program)-
CWMALL 2.5 (place this file somewhere on your computer where you can easily locate it)-
"su-2.3.6.1.x.zip" file (place this file on the root of your sdcard...not within any folders)-
Modified stock Froyo kernel (place this file somewhere on your computer where you can easily locate it). This file is only necessary if you're rooting Froyo. It's not necessary for Gingerbread-
Instructions:
1. Install Samsung drivers on your computer.
2. Open Odin on your computer. (You may need to disable antivirus programs on your computer and/or phone for this to work properly.)
3. Power off your phone and remove the battery.
4. Plug the stock USB cord that came with your phone into a powered USB port on your computer (usually on the back of the computer).
5. Press and hold the "volume down" button on your phone, and continue to hold it while plugging the USB cord into your phone. This will put your phone into download mode. You'll see a large yellow triangle on the screen of your phone. (Let go of the volume button at this point.) You will also see one of the small boxes in Odin turn yellow, as well as "Added" appearing in the message box.
6. Click the PDA button in Odin (NOT the PHONE button) and navigate to the "CWM2.5_Voodoo.tar.md5" file you downloaded earlier. This file does not include a voodoo kernel and will not perform the voodoo lagfix conversion. It's only named as such to note that it is compatible with voodoo kernels.(make sure auto reboot is unchecked, although it should be by default)
7. Click START. When this process has finished, you'll be notified in Odin (succeeded 1 / failed 0) and your phone's screen will go blank.
*** Step 8 is only for rooting Froyo. If you're rooting Gingerbread, skip Step 8 and proceed to Step 9. ***
8. Unplug your phone and click RESET in Odin. Repeat Step 5 to get the phone back into download mode and recognized by Odin. Using the PDA button, navigate to the "stock_kernel.tar.md5" file you downloaded earlier, select it, and press START. You'll again be notified in Odin once this process has completed (succeeded 1 / failed 0).
9. Unplug your phone and re-insert the battery.
10. Press and hold BOTH volume buttons. While holding them, press the power button. Hold all three simultaneously until you see "SAMSUNG" appear TWICE. This will boot your phone into CWM 2.5 red recovery. If your phone boots up normally here and not into recovery, just wait for it to boot up and then power it down and try again. It may take a couple tries for you to get it right.
11. Using the volume rocker, navigate down to "Install zip from sdcard." Highlight it and press the power button to select.
12. Navigate to "choose zip from sdcard" and select with the power button.
13. Navigate to the "su-2.3.6.1.x.zip" file that you downloaded earlier and select it. Scroll to "Yes," and use power button to select.
14. When you're advised of completion, press the MENU softkey to go back to the previous CWM Recovery screen, then highlight and select "reboot system now."
*Thanks to Bhfd64 @ galaxy forums for this write up!!
.
I have a Samsung galaxy ace 2 x
Network Virgin
ics 4.0.4
GT-S7560M
Sent from my GT-S7560M using xda app-developers app
KyleAustin said:
I have a Samsung galaxy ace 2 x
Network Virgin
ics 4.0.4
GT-S7560M
Sent from my GT-S7560M using xda app-developers app
Click to expand...
Click to collapse
note- i do not take credit of making the toolkit
first download the gt-s7560m root toolkit - http://bit.ly/13K9Ute
1. Copy “CWM-Superuser-3.1.3” to your sd card.
2. Take the back cover off of your phone.
3. Place your phone in download mode by turning it off and pressing “Power + Home + vol down” briefly for a second. Your phone should boot to a menu asking you to choose. Press “vol up” button to choose recovery mode,
4. Start odin you should see the box with the com port yellow showing it found your phone
5. Make sure only the following 3 boxes are check marked “f. Reset time” “Auto reboot” and “PDA” Load the recovery.tar file in the PDA section.
6. Hit start, when odin finishes your phone will vibrate. When your phone starts to vibrates pull the battery!
7. Now you can put your phone back together. I could not figure out how to enter recovery mode using the buttons so I did it using adb “adb reboot recovery”
8. You should now be in recovery mode. Use the hardware buttons to navigate vol up and down to scroll. Home button to select and power button to go back.
9. Select install zip from sd card, choose zip from sd card. Choose “CWM-Superuser-3.1.3.zip”
Once it’s done hit the power to go back and select reboot phone. You should have full root and custom recovery installed.
Thanks for the help
Sent from my GT-S7560M using xda app-developers app
TechMasta said:
note- i do not take credit of making the toolkit
first download the gt-s7560m root toolkit - http://bit.ly/13K9Ute
1. Copy “CWM-Superuser-3.1.3” to your sd card.
2. Take the back cover off of your phone.
3. Place your phone in download mode by turning it off and pressing “Power + Home + vol down” briefly for a second. Your phone should boot to a menu asking you to choose. Press “vol up” button to choose recovery mode,
4. Start odin you should see the box with the com port yellow showing it found your phone
5. Make sure only the following 3 boxes are check marked “f. Reset time” “Auto reboot” and “PDA” Load the recovery.tar file in the PDA section.
6. Hit start, when odin finishes your phone will vibrate. When your phone starts to vibrates pull the battery!
7. Now you can put your phone back together. I could not figure out how to enter recovery mode using the buttons so I did it using adb “adb reboot recovery”
8. You should now be in recovery mode. Use the hardware buttons to navigate vol up and down to scroll. Home button to select and power button to go back.
9. Select install zip from sd card, choose zip from sd card. Choose “CWM-Superuser-3.1.3.zip”
Once it’s done hit the power to go back and select reboot phone. You should have full root and custom recovery installed.
Click to expand...
Click to collapse
this link is not working getting a 404 error code
first download the gt-s7560m root toolkit - http://bit.ly/13K9Ute
Nvm got it working thanks anywas
Sent from my GT-S7560M using xda premium
Hey i have a t mobile galaxy s3 and i recently put hyper-drive rom on there but i didnt know that i wouldnt get 4g and i cant even send picture messages and my phone is like on overheat mode lol so i just wanna go back to stock!!!1! no root, no mods, just pure jb 4.1.1 like it was at first so if you can help me i gladly appreciate it
is your device name GT-I9305N ?
Click here: http://samsung-updates.com/device/?id=GT-I9305N and either download JB 4.1.2 or *4.1.1 (Stock)
Here is the stock one 4.1.1 from the ^^above site
http://hotfile.com/dl/178072704/acf...305N_COV_1_20120925093014_ny59ny64ie.zip.html
after you download the file follow
http://gs3.wonderhowto.com/how-to/r...sh-stock-roms-using-odin-for-windows-0142713/
(press thanks if i helped!)
nopeee
hey thats not my device model i have a tmobile one sorry so that wont work but thanks for trying to help
Download Odin Flasher and USB driver
Odin downloader Odin3_V3.07
hotfile.com/dl/161620048/6c6d559/Odin3_v3.07.rar.html
USB Driver Samsung SGH-T999 USB Driver
hotfile.com/dl/167907224/256bf74/T-Mobile_T999_GSIII_Samsung_USB_Driver_v1_4_6_0.exe.html
Grab the original stock ROM:
SGH-T999_TMB_T999UVALH2_T999TMBA
hotfile.com/dl/167751637/360216d/SGH-T999_TMB_T999UVALH2_T999TMBALH2_Original.zip.html
Or the latest s3 jelly bean update (4.2)
hotfile.com/dl/179539523/d0bd79a/SGH-T999_TMB_T999UVDLJA_T999TMBDLJA_Original.zip.html
Odin Flasher Guide: T999UVALH2 Android 4.0.4 ICS Firmware on Samsung Galaxy S III SGH-T-999
Information from:
androidromupdate.com/2012/08/25/restore-back-t-mobile-samsung-galaxy-s3-sgh-t999-back-to-original-ics-4-0-4-t999uvalh2-stock-firmware/
1) “Extract” or “unzip” the downloaded stock ROM to get the .tar.md5 file.
2) Run Odin3_v3.07.exe
3) In Odin - DO NOT CHECK the RE-PARTITION checkbox, only both ‘Auto Reboot’ and ‘F-Reset’ left checked.
4) Click on the PDA button then browse to the folder where you extracted the stock ROM
T999UVALH2_T999TMBALH2_T999UVLH2_HOME.tar.md5 file.
5. Reboot the phone in download mode: To reboot the Galaxy S3 into download mode , you need to turn the power off. After it completely shut off, just press and hold the Volume Down key, Home button and the Power ON/OFF button simultaneously.
You’ll then need to press the Volume Up to continue. You’ll be prompted into a warning screen and asking you to press “volume up” if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”
5) Once the phone in download mode screen, connect the PC USB cable To Phone. The highlighted ID:COM box is and indication that the device is connected properly to PC. If you still do not get any results, try another USB port on your computer.
6) Click the Start button to begin flashing.
7) Wait until it finishes or watch out for the word “PASS”.
Once the phone completely reboots, perform wipe/factory reset to get a fresher firmware installation.
1. Hold Power and Volume Up together, this will switch the device into recovery mode.
2. Release Power after holding it for a second but continue to hold the Volume Up button until recovery menu appears.
Select wipe cache
Select wipe data/factory reset.
Select reboot
That’s all! your Samsung Galaxy S III SGH-T999 now fully restoredstored
Hello guys, today i get my friend's old Samsung galaxy ace duos SCH-i589..& this is my first samsung device to be looking for development in xda (i personally avoiding samsung). I thought that all samsung devices have good xda support but from my searching on google shows that it has almost nil support.. I even can't find proper forum for installing cwm in this device..Now i think what i found from diverse locations should be put in one place.
NOTE: I am not a developer nor below is my work..i would like to all those members who made it possible.
Running from stock rom, i can root this device from the below files:
update.zip
root Instruction:
1. Download & copy the below attached "update.zip" to the root of your sdcard.
2. Turn off your phone.
3. Press & hold (Power + Volume down + Home) keys & release when the phone starts in recovery mode.
4. In recovery mode, the screen select "select update.zip from sdcard".
Remember in recovery touchscreen will not work use volume up down & home keys.
5. Select "update.zip".
6. Yes
7. Done
now to unroot this device after rooting:
unroot.zip
unroot Instructions:
1. Uninstall all [Root] apps.
2. Download "unroot.zip"
3. Turn off your phone.
4. Press & hold (Power + Volume down + Home) keys & release when the phone starts in recovery mode.
5. In recovery mode, the screen select "select update.zip from sdcard".
Remember in recovery touchscreen will not work use volume up down & home keys.
6. Select "unroot.zip".
7. Yes
8. Done.
Caution : Both files are related to each other, If rooted with "update.zip" from here then only use "unroot.zip"
Clockwork mod recovery
Now temporary cwm which can do any cwm task but u have to load it everytime.
CWM-6102.zip
cwm instruction
1. Download & copy the below attached "CWM-6102.zip" to the root of your sdcard.
2. Turn off your phone.
3. Press & hold (Power + Volume down + Home) keys & release when the phone starts in recovery mode.
4. In recovery mode, the screen select "select CWM-6102.zip from sdcard".
Remember in recovery touchscreen will not work use volume up down & home keys.
5. Select "CWM-6102.zip".
6. Yes
7. Done
8. This has to be done every time you want to load cwm recovery.
Now i haven't tested beyond that but i found a youtube link for flashing stock rom via odin
https://www.youtube.com/watch?v=4ChtmNtpk3c
but this is in spanish so i translated in english here..
You must install Samsung KIES to ensure that your PC detects your phone.
After downloading install Odin
1 - Restart the phone in Download Mode ( Vol down , Home, Power Simultaneously ) .
press volume up to continue ( or vol down to leave but it can damage... )
2- Start Odin
3 - select files and press Start
Watch Out !!! Never unplug your phone before restarting
After 5-10 minutes your phone will reboot to your new ROM
stock rom download below:
link:http://www.mediafire.com/download/z7t1yz9c615ebj1/rom+sch-i589.zip
Thank you very much! Although my SCH-i589 is currently hard brick, I think it will be very useful! -- Greetings from new members after 8 years
We know cwm is a great recovery for any android device
and for star pro there is no official cwm recovery
few days ago I got this from a youtube video and yes it's working
Download from here
Make sure you are root user :highfive::victory:
How to install this ?
Follow below steps
1. Install samsung driver in your PC
2. Open Odin
3. Hit PDA and select downloaded file
4. Turn off your mobile
5. Press Vol down + Home + Power button
6. Stop pressing when you see the screen turn on
7. Press vol up button
8.In odin unchecked Auto reboot
9. Now click start
10. After seen the reset or pass in Odin Unpluged your mobile
11. Turn it off
12. Now press Vol up+ Home + Power
Now enjoy CWM Touch recovery
Features
1. No white screen problem
2. Touch cwm recovery
3. No chance of breaking
4. Now install zip file
ETC. ETC.
Video guide
If you have any problem please tell me and if you have XDA account please hit the Thanks button :good::fingers-crossed:
Its not open recovery its White screen
od custom ROM for the phone ?? Is there a phone ??