(Kernel)(LP/MM)(32-Bit) Phantom Kernel 2.0 for Lenovo A6000/Plus - Lenovo A6000/Plus Guides, News, & Discussion

I am not the developer of this kernel. Harsh_it Jain is the developer of this kernel and I am only sharing it on his intructions
Only For Lollipop/Marshmallow Based 32Bit Roms
Compiled From Latest Linaro 5.3 Where As Phantom v1.0 Was From 5.1 Thereby Bringing More Awesomeness To Your Device.
------Phantom-2.0-------
Hello Guys I Harsh_it Jain Proudly Present To You my Latest work.
Phantom 2.0
Successor Of Phantom 1.0 Phantom 2.0 has a huge Lot Of Changes Comming To Features :-
New Multicore Descision Making Efficiency With reduced Latency
^^Fully Coded by Me (Used Simple Concept that we Use In 10th Class And All Here What I did Is just Coded One Script Worth 378 Lines - yup 378 line so what it Do is It will Check the workload and will use the Maximum Payload per core to finish the Work If payload exceeds 75% of the coreCpuFreq then The Other core Is automatically called with Already 25% of workQue Added To It With pagged and Swapped thereby Increasing Performance Drastically)
Badly Tweaked Thermal Engine
Increased Multicore Performance To Get Best Out Of Cores
This Summer Stay Cool With New Optimized Thermal Engine
Cpu oc 1.6 Gpu Oc 465mhz
Governers
1 Ondemand
2 interactive
3 Userspace
4 Elemental X
5 BioShock
6 LionFish
7 HellsActive
8 Alucard
9 Zzmoove
10 impulse
11 Ondemand Plus
12 Alucard
13 Nightmare
14 Darkness
15 Yankactive
16 Conservative
17 Powersave
18 Performance
Ton Of them and I Already Tweaked Them Badly Updated Alucard Zzmoove and Interactive to Latest With Franco Kernel Source , HellisCore Kernel Source Etc
I/O Schedulars
1:-Noop
2 Deadline
3 CFQ
4 BFQ
5 Zen
6 FIOPS
7 Row
(Updated Row Noop Deadline To Latest Possible Sources Where as 1.8 Driver VersioN for BFQ )
HotPlugs
1 - AutoSMP
2 - Intelliplug
3 - Mako
4 - Alucard plug
5 - MsmSleeper
(Updated Intelliplug To 5.0 and Powersuspend to 5.0 Alucard HotPlug To 3.2 Mako Ported From Nexus Directly Without Changes so I used Dummy FrequencY File dont cry that you see 18000 MHZ)
A Hell Lot Of tweakings
for Cpu and GPU
aggresive Battery Saving Tweaks
Click to expand...
Click to collapse
INSTRUCTIONS
Boot Into Recovery
Flash the provided Kernel Zip
Wipe Dalvik and Cache
Reboot To System
DOWNLOADS
Phantom Kernel 2.0 https://www.androidfilehost.com/?fid=4996503000517181796
Kernel Sources - https://github.com/amitwh/android_kernel_lenovo_wt86518/tree/mkl-mr1/arch

---

Reserved

---

mshoaib7 said:
I am not the developer of this kernel. Harsh_it Jain is the developer of this kernel and I am only sharing it on his intructions
Only For Lollipop/Marshmallow Based 32Bit Roms
INSTRUCTIONS
Boot Into Recovery
Flash the provided Kernel Zip
Wipe Dalvik and Cache
Reboot To System
DOWNLOADS
Phantom Kernel 2.0 https://www.androidfilehost.com/?fid=4996503000517181796
Kernel Sources - https://github.com/amitwh/android_kernel_lenovo_wt86518/tree/mkl-mr1/arch
Click to expand...
Click to collapse
Are you tested it?

---

nangdha said:
Are you tested it?
Click to expand...
Click to collapse
its already tested and it works like a beast

---

ScreenShots
Tested Working Good On Mokee A Good amount Of features

---

dev_harsh1998 said:
Tested Working Good On Mokee A Good amount Of features
Click to expand...
Click to collapse
Looks great.. I want to test it on miui7. But, how the battery?
---------- Post added at 15:53 ---------- Previous post was at 14:58 ----------
Unsucessfully flashed on MIUI7, stuck at lockscreen

---

nangdha said:
Looks great.. I want to test it on miui7. But, how the battery?
---------- Post added at 15:53 ---------- Previous post was at 14:58 ----------
Unsucessfully flashed on MIUI7, stuck at lockscreen
Click to expand...
Click to collapse
Which MIUI 7 ? Try it on MIUI 7 Russian build

---

mshoaib7 said:
Which MIUI 7 ? Try it on MIUI 7 Russian build
Click to expand...
Click to collapse
Yes, i was on Miui7 Rusian build version 6.4.28 already. Downloaded from here.
Now i switch back to gods kernel R1.

---

plzz give me the link of ur mokkee rom other wise give a fix for my mokee wifii bug
Har**** jain there is a bug wifi not working on my mokee rom plzz tell me a fix otherwise. Give the link of your mokee 32bit rom which u r using plzz reply fast

---

shivansh khare boy said:
Har**** jain there is a bug wifi not working on my mokee rom plzz tell me a fix otherwise. Give the link of your mokee 32bit rom which u r using plzz reply fast
Click to expand...
Click to collapse
1. Open terminal emulater
2. Type "su"(without quotes) and grant root access
3. Type "svc wifi disable"
4. Type "insmod /system/lib/modules/wlan.ko
5. Type "svc wifi enable"
Now your wifi should work. To avoid doing this on every reboot make init.d script for it

---

init.d script
I don't know how to make a init.d script plzz make it for me otherwise tell me the steps this trick is working thanks

---

Very nice:good:

---

shivansh khare boy said:
I don't know how to make a init.d script plzz make it for me otherwise tell me the steps this trick is working thanks
Click to expand...
Click to collapse
You can make init.d by KernelAdiutor btw..

---

Brother, please give me the script.

---

Loknath said:
Brother, please give me the script.
Click to expand...
Click to collapse
Extract and copy 01wlanon file in system/etc/init.d and reboot. If it doesn't work automatically after reboot, you will have to execute the script manually from Kernel Adiutor

---

Thanks brother it worked for me

---

Hey, Is there any problem if I use this kernel with exposed?

---

shivamgupta1996 said:
Hey, Is there any problem if I use this kernel with exposed?
Click to expand...
Click to collapse
Haven't tried it but it shouldn't create any problem

---

mshoaib7 said:
Haven't tried it but it shouldn't create any problem
Click to expand...
Click to collapse
Bruh, I extracted and moved the script file to init.d folder and rebooted but still wifi didn't worked.
Rom: cm13 32 -bit

---

shivamgupta1996 said:
Bruh, I extracted and moved the script file to init.d folder and rebooted but still wifi didn't worked.
Rom: cm13 32 -bit
Click to expand...
Click to collapse
You will have to manually execute the script from kernel adiutor app