CORE™ KERNEL for Galaxy Core Prime
Features
Upgraded to latest mainstream Linux kernel (3.10.102)
Governors: interactive, performance, powersave, intelliactive (still stock, will add later)
IO schedulers: noop, deadline, row, cfq, bfq, vr, sio, zen, fifo, fiops
SELinux Permissive
F2FS support
Multiple zRAM devices, prevent performance bottleneck
OC'ed GPU clock speed (460 MHz) (like stock TouchWiz kernel)
Better memory managements
UKSM (Ultra Kernel Samepage Merging)
zswap - compressed memory pool for swap file/zRAM
Support all ROM versions (from stock to CM13)
Experience yourself
HOW TO INSTALL
Download the flashable ZIP in post 2 below
Copy to your SD card, make sure you don't forget the file path
Now install and enjoy the kernel :good::good::good:
Credits
Thanks to @psych.half for his mkbootimg idea
This small video will show how this phone do its multitasking with this kernel (watch at 360p for less lags)
XDA:DevDB Information
CORE� Kernel, Kernel for the Samsung Galaxy Core Prime
Contributors
doesntexits
Source Code: https://github.com/koquantam/android_kernel_CORE-TM-_core33g
Kernel Special Features:
Version Information
Status: Testing
Created 2016-07-03
Last Updated 2016-07-28
Download links & BUGS
XDA Downloads: Link
Google Drive folder: Link
BUGS
Playing video from gallery cause freeze. Use MX Player or any video player app to play offline videos
How to post bugs
As you know, this is a kernel, so logcat is useless. We use "dmesg" to track what the kernel do and how it's done, what it's fault...
If you post logcat to a kernel dev, no helps. So now, a single rule: No logcats
To post bugs, please do this:
1. Make sure you have a computer running any Linux distros (e.g Ubuntu) (ignore this if you already have)
2. Plug your phone with USB cable plugged to computer
3. Open Terminal, type these (DO NOT MISS ANYTHING)
Code:
adb shell dmesg | tee dmesg.txt
The "tee" command will export your "dmesg" (driver messages) to your /home/<USER> folder (e.g from mine: /home/a1/dmesg.txt)
4. Post the full dmesg text logs to this thread
CHANGELOG
V1 (1st-gen Pentium)
Initial release
V1.1 (2nd-gen Pentium)
Added 384MHz min CPU frequency
OC'ed GPU freq to maximum value (460MHz) (remember, stock TouchWiz kernel is fluid because of this)
V1.2
Fixed suspend module
V1.3
Added support for ALL ROM variants
V2.0 (3rd-gen Pentium)
Implemented vnswap (Virtual NAND swap device) from Sammy's grandprimeve3g stock source
Allow to set zram disksize through build.prop
V3.1: Link
doesntexits said:
Reserved
Click to expand...
Click to collapse
The new one?
---------- Post added at 10:38 AM ---------- Previous post was at 10:30 AM ----------
"Installation aborted" in clockworkmod
notsuper said:
The new one?
---------- Post added at 10:38 AM ---------- Previous post was at 10:30 AM ----------
"Installation aborted" in clockworkmod
Click to expand...
Click to collapse
Use TWRP
Edit: Wait updating new ZIP
Edit2: Updated new file
How to use Multiple zRAM???. Devices have zram0
doesntexits said:
Use TWRP
Edit: Wait updating new ZIP
Edit2: Updated new file
Click to expand...
Click to collapse
Update finish???
This .???
x4blue said:
This .???
Click to expand...
Click to collapse
Nope. You haven't installed it
Check screenshot tab
Sent from my SM-G360H using XDA Labs
doesntexits said:
Nope. You haven't installed it
Check screenshot tab
Sent from my SM-G360H using XDA Labs
Click to expand...
Click to collapse
Installed fail
x4blue said:
Installed fail
Click to expand...
Click to collapse
Use TWRP to install
Sent from my SM-G360H using XDA Labs
Use file CORE(TM)_kernel.zip is working
Bro is this the same kernel that you post at CM12.1 thread? The cyanogenmod+?
Why my device not turn off perfectly... It shows some light.....NOT a power off.....sorry for my english
JustFrame said:
Bro is this the same kernel that you post at CM12.1 thread? The cyanogenmod+?
Click to expand...
Click to collapse
Nope. That's stock kernel
Sent from my SM-G360H using XDA Labs
notsuper said:
Why my device not turn off perfectly... It shows some light.....NOT a power off.....sorry for my english
Click to expand...
Click to collapse
Sorry, I don't get you
Sent from my SM-G360H using XDA Labs
Exp Question
x4blue said:
Use file CORE(TM)_kernel.zip is working
Click to expand...
Click to collapse
Now phone how works? - Smooth, Good or Perfect? Have any Battery draining problem which was happening before installing this kernel?
itsmedRb said:
Now phone how works? - Smooth, Good or Perfect? Have any Battery draining problem which was happening before installing this kernel?
Click to expand...
Click to collapse
You have to experience yourself. Asking people just getting answers depends on their opinions
Cpu governor and i/o scheduler for battery improvement? I used interactive for governor and deadline for scheduler.
Related
I found this on the N7105 Forums and thought I should share my find and slight modification to the Updater Script to work with our Device All the rest of the work belongs to this Great Senior Member psndna88
Thank you for the Great Work !!! Great Kernel and App With Bo Coo Features !!!
ATTN:
It Takes a few Mins for the Samsung Note II Screen to go to you Boot animation So be Patient Please!!
Beware If your Rom is Running a lot of init'd Scripts you might have issues with Freezing Stock or close to Stock Works Great!!!
psndna88 will update the updater Script on Next Version to include
Our Version Note 2 Better Worked for me great running it now no issues to speak of.
Disclaimer
Davidson3680 or psndna88 WILL NOT be held responsible for anything you do to your device. This includes but is not limited to flashing this rom or any modifications done by the team/members or any other developer. If you brick your device or anything else in between due to you not reading or creating proper backups, it is your responsibility.
Original Post Info At Bottom of Post
Click to expand...
Click to collapse
CPU GOVERNORS: conservative, ondemand, powersave, hotplug, adaptive, interactive, performance, userspace, lulzactiveq, pegasusq, Zzmoove 0.7d
I/O GOVERNORS: deadline, cfq, row v4, sio (tweaked), noop, vr, bfq-v6r2, zen
CIFS & NFS Network FileSystems support
Boeffla sound v1.6.4
tweakable led fading notifications
swap support enabled
cleancache enabled
automatic efs backup on internal sdcard
CRT-OFF friendly
500MB LZ4 Zram with zcache
uses my compiled busybox (v1.22) integrated in kernel to support swap device priorities
kernel uses LZMA compression
Triangle Away support
SAMSUNG Open-Sourced exFAT support v1.2.5
Dynamic Fsync v1.2, Battery Charging voltages support
CPU OC ( 2.0 GHz ) & UV support
MALI r3p2 GPU OC & UV support wth reduced debugging
integrated second prioritised optional AGNi preloadSWAP option in Boeffla app
CWM-FLASHABLE OC/UV boot failure reseter tool automatically placed on internal sdcard
GCC 4.7.2 toolchain compiled arm-v7l cortex-a9 neon optimised
Zram modifications with Quad zram Imlementation with equal size, swappiness and swap priority
AGNi Main user profiles (Extreme Battery Save / Battery Save / Normal / Gaming) which does not break NON-OC limits but user can override settings at will
Drop & forget for init.d scripts (user doesnt need to set permissions manually)
Linux kernel upstreamed to 3.0.101
Auto Root SuperSU v1.86 & takes care of su permissions on each boot
Implemented Touch Wake v1.1a & touch boost (by default touch wake and touch boost are disabled)
Includes autoinstalling kernel config app "AGNi Control" [ THANKS to @HM.Carbide ]
added frandom support and Frandom option in AGNi control (/dev/random and /dev/urandom is replaced by symlinked /dev/frandom and /dev/erandom respecively = speeds up entropy generation without seeder app or rngd service)
About LZ4 compression/decompression:
LZ4 is a very fast lossless compression algorithm, providing compression speed at 300 MB/s per core, scalable with multi-cores CPU. It also features an extremely fast decoder, with speed in GB/s per core, typically reaching RAM speed limits on multi-core systems.
ADVANTAGE OF LZ4 OVER SNAPPY = More BLAZING FAST speed with almost same marginal cpu usage for Zram
All Future Updates will Be here
New I605 Thread From psndna88:
[FONT="]http://forum.xda-developers.com/showthread.php?t=2607652[/FONT]
Click to expand...
Click to collapse
Bugs : Please Report them to psndna88
On the Original Post
Original Post By psndna88:
[FONT="]http://forum.xda-developers.com/showthread.php?t=2607652[/FONT]
Approved By: psndna88
XDAevDB Information
AGNi Kernel, a Kernel for the Samsung Galaxy Note II
Contributors
psndna88
Kernel Special Features: Based on STOCK OSRC Sources, upstreamed to 3.0.101 with selected picked mods/patches to be near to stock as possible.
Version Information
Status: Stable
Created 2014-01-08
Last Updated 2014-01-09
Click to expand...
Click to collapse
Click to expand...
Click to collapse
I would Just like to Start by saying this Kernel is Great
Been running it and it works great all the way haven't tested Everything But what I did was working Good !!!
Thank you psndna88 for this Great Kernel!!
Very nice. Thanks for bringing this over. :thumbup:
TaPpEd from my nOtEwOrThY N2
Running very smooth so far. Running the sophisticated 2.5 rom
Sent from my SCH-I605 using XDA Premium 4 mobile app
Good to see
Thanks for porting this!
Sent from my SCH-I605 using xda app-developers app
Thanks
Just flashed and so far it's working great!!!
Couldn't get it to flash aborted twice
Sent from my SCH-I605 using Tapatalk
laosguy said:
Couldn't get it to flash aborted twice
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
update recovery...
I'm on Philz latest
Sent from my SCH-I605 using Tapatalk
laosguy said:
I'm on Philz latest
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
@Davidson3680 u probably need to replace updater-binary with other one ... .. ill put other one in next version... i had used the one used in cm11
Sent from Ultimarom v16 I9300XXUGML2 + AGNi pureSTOCK v3.2d kernel 3.0.101
psndna88 said:
@Davidson3680 u probably need to replace updater-binary with other one ... .. ill put other one in next version... i had used the one used in cm11
Sent from Ultimarom v16 I9300XXUGML2 + AGNi pureSTOCK v3.2d kernel 3.0.101
Click to expand...
Click to collapse
TY psndna88 I also was doing some testing and this will only work if your rom Doesn't have other Tweaks Like mean beans Reborn it will not work.
Because of the Scripts he has in the Init'd he has Changes that will freeze your phone.
But any Stock rom with and My Roms will work as well JellyWiz,JellyWiz X Both work great
I will add this to the post and a list of roms that are compatible. TY again for this great work !
Running nice on N3BULA
Flashed on TWRP 2.6.3.1
:thumbup:
Sent from my SCH-I605 using Tapatalk
laosguy said:
I'm on Philz latest
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Try TWRP that's what I am on with no issues at all.
Flashed this using philz recovery, worked flawlessly. Was missing my sound mods from peanut butter jelly. Now I'm content.
Sent from my Galaxy Note II
Crap I'm running this on Meanbean Reborn and just saw your disclaimer. Everything seems ok though.
Sent from my SCH-I605
I tried it with n3bula and all seemed well at first then the phone froze and required battery pull. I restored a backup of Nephilim 4.5 and I will try with that and report back. Plus I also noticed with the default governor the cpu was pegged at 1200mhz and wouldn't scale.
Sent from my SCH-I605 using XDA Premium 4 mobile app
DMardroid said:
Running nice on N3BULA
Flashed on TWRP 2.6.3.1
:thumbup:
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
No freezes like bradonhatty experienced? How's the battery life so far?
Sent from my SCH-I605 using Tapatalk
larry_thagr81 said:
No freezes like bradonhatty experienced? How's the battery life so far?
Sent from my SCH-I605 using Tapatalk
Click to expand...
Click to collapse
Real good I haven't charged since Yesterday still at 40%
This is awesome..been wanting this kernel for vzw for a while now. @psndna88 do you think you can maybe give us a working pureCM kernel?? That would make my life complete. Thanks
Aditya Kernel for the Nexus 5 (Hammerhead) by @javelinanddart
Code:
#include std/disclaimer.h
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. :P
* blah blah blah you get the point.
*/
Post #1: Disclamer, special thanks
Post #2: Features
Post #3: Downloads
Post #4: Changelog
Post #5: FAQ
Note: This is based Directly of Faux's Kernel, I don't own the Nexus 5 but I do have a tester. If anything goes wrong report it here and to faux123
Enjoy and Happy Flashing!
Credits and Thanks:
google, faux123, christopher83, flar2
I recommend that you use Faux's Kernel Control App OR Trickster Mod
XDA:DevDB Information
Aditya Kernel, Kernel for the Google Nexus 5
Contributors
javelinanddart, faux123, flar2
Source Code: https://github.com/javelinanddart/android_kernel_lge_hamerhead
Kernel Special Features:
Version Information
Status: Stable
Created 2014-12-11
Last Updated 2014-12-13
LOLLIPOP
Features:
Based on Linux 3.4.10
Compiled with linaro toolchain 4.9.3 2014.11 optimized for cortex-a15
Available CPU governors: elementalx, ondemand, performance, powersave, intellidemand, intelliactive, intellimm
Available GPU governors: ondemand, performance, simple
Available schedulers: row, deadline, noop, cfq, bfq-v7r5, fiops, sio, tripndroid, zen, vr, fifo
IntelliPlug
NTFS R&W Support
exFAT Support
UTF8
BLN
Voltage control
Sweep2Wake
DoubleTap2Wake
Pocket Detection
IntelliThermal v2
zRam with LZ4 compression
zCache with LZ4 compression
CPU OC to 2.8GHz
Faux Sound Control v. 3
Improved alghorithm: SHA1, AES, SQRT, lib/string (glibc version), lib/memcopy (glibc version), XOR (neon)
Dynamic FSYNC by faux123
Fastcharge
powersuspend driver (replace earlysuspend)
KCAL control (RGB)
Gamma Control
heavily patched memory allocators, RWSEM and mutex (take a look at my github, too many changes to make a list here)
FRANDOM Support
Multi-ROM Support
F2FS Support
NEON Support
Snake Charmer
Hybrid Kernel
SELInux Optimization
DOWNLOADS
https://www.androidfilehost.com/?w=files&flid=22543
https://mega.co.nz/#F!hgQQDRLB!RVP6cdcHUZB653xxwBnz6A
Changelog:
Dec 12
Release Test version with Linux 3.4.10
Release a possible fix: Switch to ElementalX governor and CFQ I/O Scheduler
Dec 11
Initial Release
Based on Faux's Kernel
Add SIO, VR, ZEN, FIFO, and TRIPNDROID I/O Schedulers
Add Frandom Support
Add ElementalX governor (replace interactive governor)
Add S2W, S2S, and DT2W
Tnx for a new kernel
HOW TO INSTALL
Method 1:
Flash in Recovery (TWRP or CWM)
Method 2:
Extract boot.img from the zip
In fastboot mode:
Code:
fastboot flash boot boot.img
then wipe cache
Code:
fastboot erase cache
Method 3:
Extract boot.img from the zip
Use a tool to flash the boot.img
Method 4:
Extract the boot.img from the zip
in terminal:
Code:
dd if=boot.img of=/dev/block/platform/msm_sdcc.1/by-name/boot
Always be sure to wipe cache and dalvik after installing. Enjoy!
abalam said:
Tnx for a new kernel
Click to expand...
Click to collapse
Was that sarcastic or real?
Also, NP, I just wanted to make one to add some features and touches to faux's like more i/o scheds, frandom support, and I'm working on getting it up to Linux 3.4.105
EDIT: First Build is up! Grab it at my AFH in the 3rd post
MEGA Mirror coming soon!
javelinanddart said:
Changelog:
Dec 11
Initial Release
Based on Faux's Kernel
Add SIO, VR, ZEN, FIFO, and TRIPNDROID I/O Schedulers
Add Frandom Support
Click to expand...
Click to collapse
Please try to add blue_active governor
pianistaPL said:
Please try to add blue_active governor
Click to expand...
Click to collapse
Working on adding that as well as elementalx
I'll probably build that later today or tomorrow
Nice features in Kernel gj, but I have bootloop on Nexus Experience ROM :/
Looking forward for next build
pandza88 said:
Nice features in Kernel gj, but I have bootloop on Nexus Experience ROM :/
Looking forward for next build
Click to expand...
Click to collapse
Are you on the AOSP one or the CM or PA one?
If it's the AOSP one it uses the stock-based kernel so it should work just fine
javelinanddart said:
Are you on the AOSP one or the CM or PA one?
If it's the AOSP one it uses the stock-based kernel so it should work just fine
Click to expand...
Click to collapse
Is your kernel a sleeper like the name suggest? Had a buddy uses to brag about his Amc Javelin all the time Said it was un-assuming but fast as lightening, thanks for sharing!
razrlover said:
Is your kernel a sleeper like the name suggest? Had a buddy uses to brag about his Amc Javelin all the time Said it was un-assuming but fast as lightening, thanks for sharing!
Click to expand...
Click to collapse
I have a friend named Aditya who has a Nexus 5, so I named it that. (ironically, he couldn't flash it because he didn't want to root so it started getting messy)
my username is javelinanddart because my first phone was a peice-of-**** samsung dart, and a javelin is a huge dart (basically) and I liked it so it stuck.
Hey guys! 2 New builds up in my AFH
Build 2-add s2w,s2s,and dt2w
Build 3-remove interactive governor and replace it with elementalx + s2w,s2s,and dt2w
blu_active is being buggy as hell for me so I'm going to leave it for right now
I might readd interactive and make elementalx a module but we'll see
Enjoy!
A new kernel is welcome always ? I 'll try it. Thank you.
javelinanddart said:
Are you on the AOSP one or the CM or PA one?
If it's the AOSP one it uses the stock-based kernel so it should work just fine
Click to expand...
Click to collapse
I am on n5x AOSP but can't boot with your kernel. It stuck on Google screen. Other android 5 kernels boot just fine. I will try new build now.
---------- Post added at 01:36 PM ---------- Previous post was at 12:42 PM ----------
Still same...
javelinanddart said:
Hey guys! 2 New builds up in my AFH
Build 2-add s2w,s2s,and dt2w
Build 3-remove interactive governor and replace it with elementalx + s2w,s2s,and dt2w
blu_active is being buggy as hell for me so I'm going to leave it for right now
I might readd interactive and make elementalx a module but we'll see
Enjoy!
Click to expand...
Click to collapse
I'm curious to know if there is any reason behind kernel name.
neobuddy89 said:
I'm curious to know if there is any reason behind kernel name.
Click to expand...
Click to collapse
I have a friend named Aditya who has a Nexus 5, so I named it that. (ironically, he couldn't flash it because he didn't want to root so it started getting messy)
Click to expand...
Click to collapse
That's why
pandza88 said:
I am on n5x AOSP but can't boot with your kernel. It stuck on Google screen. Other android 5 kernels boot just fine. I will try new build now.
---------- Post added at 01:36 PM ---------- Previous post was at 12:42 PM ----------
Still same...
Click to expand...
Click to collapse
That's really odd.
IDK What to do as it's working for everyone else
javelinanddart said:
That's really odd. You have unlocked bootloader and custom recovery right?
I'll try to make another build in a sec that might work, i"ll attach it when I"m done
Edit: Try this one
Faux123's works for you right? If so, this should as well. If not, you're probably doing something wrong
Click to expand...
Click to collapse
Faux work I am using it now.
New one gives just black screen nothing else :S
I am not the developer of this kernel. Harsh_it Jain is the developer of this kernel and I am only sharing it on his intructions
Only For Lollipop/Marshmallow Based 32Bit Roms
Compiled From Latest Linaro 5.3 Where As Phantom v1.0 Was From 5.1 Thereby Bringing More Awesomeness To Your Device.
------Phantom-2.0-------
Hello Guys I Harsh_it Jain Proudly Present To You my Latest work.
Phantom 2.0
Successor Of Phantom 1.0 Phantom 2.0 has a huge Lot Of Changes Comming To Features :-
New Multicore Descision Making Efficiency With reduced Latency
^^Fully Coded by Me (Used Simple Concept that we Use In 10th Class And All Here What I did Is just Coded One Script Worth 378 Lines - yup 378 line so what it Do is It will Check the workload and will use the Maximum Payload per core to finish the Work If payload exceeds 75% of the coreCpuFreq then The Other core Is automatically called with Already 25% of workQue Added To It With pagged and Swapped thereby Increasing Performance Drastically)
Badly Tweaked Thermal Engine
Increased Multicore Performance To Get Best Out Of Cores
This Summer Stay Cool With New Optimized Thermal Engine
Cpu oc 1.6 Gpu Oc 465mhz
Governers
1 Ondemand
2 interactive
3 Userspace
4 Elemental X
5 BioShock
6 LionFish
7 HellsActive
8 Alucard
9 Zzmoove
10 impulse
11 Ondemand Plus
12 Alucard
13 Nightmare
14 Darkness
15 Yankactive
16 Conservative
17 Powersave
18 Performance
Ton Of them and I Already Tweaked Them Badly Updated Alucard Zzmoove and Interactive to Latest With Franco Kernel Source , HellisCore Kernel Source Etc
I/O Schedulars
1:-Noop
2 Deadline
3 CFQ
4 BFQ
5 Zen
6 FIOPS
7 Row
(Updated Row Noop Deadline To Latest Possible Sources Where as 1.8 Driver VersioN for BFQ )
HotPlugs
1 - AutoSMP
2 - Intelliplug
3 - Mako
4 - Alucard plug
5 - MsmSleeper
(Updated Intelliplug To 5.0 and Powersuspend to 5.0 Alucard HotPlug To 3.2 Mako Ported From Nexus Directly Without Changes so I used Dummy FrequencY File dont cry that you see 18000 MHZ)
A Hell Lot Of tweakings
for Cpu and GPU
aggresive Battery Saving Tweaks
Click to expand...
Click to collapse
INSTRUCTIONS
Boot Into Recovery
Flash the provided Kernel Zip
Wipe Dalvik and Cache
Reboot To System
DOWNLOADS
Phantom Kernel 2.0 https://www.androidfilehost.com/?fid=4996503000517181796
Kernel Sources - https://github.com/amitwh/android_kernel_lenovo_wt86518/tree/mkl-mr1/arch
Reserved
mshoaib7 said:
I am not the developer of this kernel. Harsh_it Jain is the developer of this kernel and I am only sharing it on his intructions
Only For Lollipop/Marshmallow Based 32Bit Roms
INSTRUCTIONS
Boot Into Recovery
Flash the provided Kernel Zip
Wipe Dalvik and Cache
Reboot To System
DOWNLOADS
Phantom Kernel 2.0 https://www.androidfilehost.com/?fid=4996503000517181796
Kernel Sources - https://github.com/amitwh/android_kernel_lenovo_wt86518/tree/mkl-mr1/arch
Click to expand...
Click to collapse
Are you tested it?
nangdha said:
Are you tested it?
Click to expand...
Click to collapse
its already tested and it works like a beast
ScreenShots
Tested Working Good On Mokee A Good amount Of features
dev_harsh1998 said:
Tested Working Good On Mokee A Good amount Of features
Click to expand...
Click to collapse
Looks great.. I want to test it on miui7. But, how the battery?
---------- Post added at 15:53 ---------- Previous post was at 14:58 ----------
Unsucessfully flashed on MIUI7, stuck at lockscreen
nangdha said:
Looks great.. I want to test it on miui7. But, how the battery?
---------- Post added at 15:53 ---------- Previous post was at 14:58 ----------
Unsucessfully flashed on MIUI7, stuck at lockscreen
Click to expand...
Click to collapse
Which MIUI 7 ? Try it on MIUI 7 Russian build
mshoaib7 said:
Which MIUI 7 ? Try it on MIUI 7 Russian build
Click to expand...
Click to collapse
Yes, i was on Miui7 Rusian build version 6.4.28 already. Downloaded from here.
Now i switch back to gods kernel R1.
plzz give me the link of ur mokkee rom other wise give a fix for my mokee wifii bug
Har**** jain there is a bug wifi not working on my mokee rom plzz tell me a fix otherwise. Give the link of your mokee 32bit rom which u r using plzz reply fast
shivansh khare boy said:
Har**** jain there is a bug wifi not working on my mokee rom plzz tell me a fix otherwise. Give the link of your mokee 32bit rom which u r using plzz reply fast
Click to expand...
Click to collapse
1. Open terminal emulater
2. Type "su"(without quotes) and grant root access
3. Type "svc wifi disable"
4. Type "insmod /system/lib/modules/wlan.ko
5. Type "svc wifi enable"
Now your wifi should work. To avoid doing this on every reboot make init.d script for it
init.d script
I don't know how to make a init.d script plzz make it for me otherwise tell me the steps this trick is working thanks
Very nice:good:
shivansh khare boy said:
I don't know how to make a init.d script plzz make it for me otherwise tell me the steps this trick is working thanks
Click to expand...
Click to collapse
You can make init.d by KernelAdiutor btw..
Brother, please give me the script.
Loknath said:
Brother, please give me the script.
Click to expand...
Click to collapse
Extract and copy 01wlanon file in system/etc/init.d and reboot. If it doesn't work automatically after reboot, you will have to execute the script manually from Kernel Adiutor
Thanks brother it worked for me
Hey, Is there any problem if I use this kernel with exposed?
shivamgupta1996 said:
Hey, Is there any problem if I use this kernel with exposed?
Click to expand...
Click to collapse
Haven't tried it but it shouldn't create any problem
mshoaib7 said:
Haven't tried it but it shouldn't create any problem
Click to expand...
Click to collapse
Bruh, I extracted and moved the script file to init.d folder and rebooted but still wifi didn't worked.
Rom: cm13 32 -bit
shivamgupta1996 said:
Bruh, I extracted and moved the script file to init.d folder and rebooted but still wifi didn't worked.
Rom: cm13 32 -bit
Click to expand...
Click to collapse
You will have to manually execute the script from kernel adiutor app
I AM IN SOME WAY RESPONSIBLE FOR ANY PROBLEMS ON YOUR NEXUS 6 !! BUT AS YOU'RE RESPONSIBLE... FLASH THIS KERNEL AT YOUR OWN RISK
-DeYuS-Kernel-
Work on ANY Marshmallow 6.X.X ROMThis kernel DON'T FORCE ENCRYPTION and is compatible with F2FS
KERNEL FEATURES
-CPU -- 35Mhz min -- 3033Mhz max -- 2.8 by default
-Msm Limiter + CPU boost + Voltage control
-Governor -- Relaxed(defaultCpu-1) -- Chill(Cpu-2&3&4)
-- zzmoove -- yankactive -- xperience -- wheatley -- umbrella_core -- tripndroid -- ragingmolasses -- preservative -- pmc -- pegasusq -- ondemand -- ondemandplus -- nightmare -- mythx_plug -- lulzactive -- lionfish -- lightning -- interactive -- intelliactive --Darkness --Alucard -- impulse -- hyperx -- elementalx -- despair -- dancedance -- conservative -- cafactive -- blu_active -- barry_allen -- adaptive -- abyssplugv2 -- wave -- performance -- Lionheart -- bioshock
-Hotplug --AutoSMP(default)
-- Thunderplug -- Zen -- MsmHotplug -- IntelliPlug -- Blu_Plug --Mako -- Bricked -- Alucard -- State Helper -- MSMSleeper
-Bcl and Bcl hotplug control -- Off by default
-GPU -- 100Mhz min -- 800Mhz max + idle at 25Mhz
-Simple GPU Algorithm + Adreno Idler
-I/O Scheduler -- Sioplus(default)
-- Zen -- TripNdroid -- Fiops -- Bfq -- Cfq -- Deadline -- FiFo -- NooP -- Row -- Sio -- Vr
-Wake lock control -- Smb135x
--BlueSleep -- Sensor_ind -- Msm_hsic_host -- Wlan_rx --Wlan_ctrl -- Wlan -- Bcmdhd --
-TCP congestion -- Westwood(default)
-- Highspeed -- Sociopath -- Bic -- Cdg -- Cubic -- Htcp -- Hybla -- Illinois -- Lp -- Reno -- Scalable -- Vegas -- Veno -- Yeah
-Others
-Double tap 2 (Wake and Sleep) + Sweep 2 (Wake and Sleep) + Camera Gesture and control over it
-Dynamic dirty writeback
-Fsync
-Kexec-hardboot
-CRC control
-High Brightness Mode (auto or manual)
-Zram
-Control sound over Headset, Mic, Headphone
-High perf sound and driver leakage
-Arch power
-State Notifier or FB Notifier
-Lcd hooks
-Krait C-States control
-Init.d script at boot
-KSM +UKSM(default)
-Lz4 compression
--And many more--
-- [DeYuS-KeRnEl-250517-201201] --
{Day/Month/Year-Minute/Hour/Second}
-->CHANGELOGS<---------------------------------------------------------------------->DOWNLOAD<--
If you like this kernel a donation is welcomeThanks to Apophis9283 for his permission to continue and Yoinx it was their kernel !!!
-Special thanks to Neobuddy89 & FranciscoFranco & Flar2 & Frap129 & Imoseyon & Yank555 & The Flash & Nathanchancei have all eyes on their github
XDA:DevDB Information
- DeYuS-Kernel, Kernel for the Nexus 6
Contributors
Dead-neM
Source Code: https://gitlab.com/deadnem/Singularity-DeYuS
Kernel Special Features: --Based on beloved Singularity kernel --Sabermod 6.0 GCC -- Linux 3.10.104 -- Many other optimisation
Version Information
Status: Stable
Current Stable Version: 250517-201201
Stable Release Date: 2017-05-25
Current Beta Version: Post#3
Created 2016-05-24
Last Updated 2017-05-28
DeYuS kernel configuration
ONLY FOR SUPERSU USER ON SYSTEMLESS ROOT
After kernel flash you'll see a /data/deyus.conf and a /sdcard/android/deyus.log
DeYuS.conf the file that is needed to set some values on boot. Every values can be changed if you know what you're doing.
INSTRUCTIONS
This is simple
Values are "SOMETHING=anything" change "anything" to the one you want.
So GOV=darkness change it to GOV=yankactive
reboot or type /sbin/DeYuS on a terminal and see if it is what you want
some explanations are already in the conf file
ALWAYS KEEP THE ORIGINAL CONF FILE because if anything go wrong you'll just have to use twrp to restore the stock file
a kernel flash won't erase the conf file exept if new features are added on a kernel side
DeYuS -- Alpha and Beta builds !
BeTa Build & TeSt Build(Alpha)
Hey buddy I used singularity kernel 1.8 and the kernel was awesome and I will try out what you have worked on and will continue to support you guys best of luck on updating and maintaining this project.
Again, great job. As Ive said Im moving on but will still tinker with source. I have no doubt you can carry on this kernel and its greatness. Thank you and great job. You have my full support
I don't see it anywhere in the OP, but what Android version is this kernel for?
-DarkKnight- said:
I don't see it anywhere in the OP, but what Android version is this kernel for?
Click to expand...
Click to collapse
6.X.X
Definitely watching this....this was my go to kernel....waiting on a few more different governors to be added.. And some user feedback. This is GREAT news!!
Dead-neM said:
Forgot that sorry. Edited now
Click to expand...
Click to collapse
Hey, glad to see that you got the zip. Looking forward to great things from this kernal!!!
harpin14789 said:
Hey, glad to see that you got the zip. Looking forward to great things from this kernal!!!
Click to expand...
Click to collapse
Yes since we've discuss I've spend all my time on this trying thing etc
Nice to see you again. Hope you'll enjoy it
Dead-neM said:
Yes since we've discuss I've spend all my time on this trying thing etc
Nice to see you again. Hope you'll enjoy it
Click to expand...
Click to collapse
Flashing now and will report back any issues I have like random reboots, etc.
---------- Post added at 12:31 AM ---------- Previous post was at 12:30 AM ----------
Dead-neM said:
Yes since we've discuss I've spend all my time on this trying thing etc
Nice to see you again. Hope you'll enjoy it
Click to expand...
Click to collapse
Why don't you upload on AFH instead of Google drive.
harpin14789 said:
Flashing now and will report back any issues I have like random reboots, etc.
---------- Post added at 12:31 AM ---------- Previous post was at 12:30 AM ----------
Why don't you upload on AFH instead of Google drive.
Click to expand...
Click to collapse
I'm a gapps addict
In fact Google drive have no time to wait for download
If you have the app on your phone it's easy to have file etc...
I already have a afh account I'll upload on it too on this day. Thanks for remind me that
Dead-neM said:
I'm a gapps addict
In fact Google drive have no time to wait for download
If you have the app on your phone it's easy to have file etc...
I already have a afh account I'll upload on it too on this day. Thanks for remind me that
Click to expand...
Click to collapse
Yes, I see what you mean. But AFH groups the files by device, etc. Whatever you are comfortable with is fine, just wanted to mention it
---------- Post added at 01:11 AM ---------- Previous post was at 12:42 AM ----------
Dead-neM said:
I'm a gapps addict
In fact Google drive have no time to wait for download
If you have the app on your phone it's easy to have file etc...
I already have a afh account I'll upload on it too on this day. Thanks for remind me that
Click to expand...
Click to collapse
Got a bootloop at google splash screen after kernal flash. Just wanted to let you know.
harpin14789 said:
Yes, I see what you mean. But AFH groups the files by device, etc. Whatever you are comfortable with is fine, just wanted to mention it
---------- Post added at 01:11 AM ---------- Previous post was at 12:42 AM ----------
Got a bootloop at google splash screen after kernal flash. Just wanted to let you know.
Click to expand...
Click to collapse
Wut? What rom are you using? Also did you dirty flash your rom before?
Dead-neM said:
Wut? What rom are you using? Also did you dirty flash your rom before?
Click to expand...
Click to collapse
I just flashed Own-rom, It might have been an error on my part, I will re-flash and get back to you.
---------- Post added at 01:35 AM ---------- Previous post was at 01:31 AM ----------
Dead-neM said:
Wut? What rom are you using? Also did you dirty flash your rom before?
Click to expand...
Click to collapse
I clean flashed with Bliss, Pure Nexus and Dirty Unicorn. Having Bootloop at google splash screen.
harpin14789 said:
I just flashed Own-rom, It might have been an error on my part, I will re-flash and get back to you.
---------- Post added at 01:35 AM ---------- Previous post was at 01:31 AM ----------
I clean flashed with Bliss, Pure Nexus and Dirty Unicorn. Having Bootloop at google splash screen.
Click to expand...
Click to collapse
Are you using multi rom?
Dead-neM said:
Are you using multi rom?
Click to expand...
Click to collapse
No, I am puzzled myself why this is happening. I flash rom and gapps, then I flash the kernal and then reboot. That is the correct method right? I checked that I had the right files downloaded and that it was not corrupted. This is really weird.
Anybody else report any problems?
harpin14789 said:
No, I am puzzled myself why this is happening. I flash rom and gapps, then I flash the kernal and then reboot. That is the correct method right? I checked that I had the right files downloaded and that it was not corrupted. This is really weird.
Anybody else report any problems?
Click to expand...
Click to collapse
An other person report that on g+ community.
It's weird it's working perfectly for me
What is your bootloader version?
Dead-neM said:
An other person report that on g+ community.
It's weird it's working perfectly for me
What is your bootloader version?
Click to expand...
Click to collapse
I tried the latest Android N beta, so my bootloader is 71.21, when I went back to MM I never bothered to change my Bootloader because I didn't have any problems. Do you think that this is the main cause of the issues? Should I downgrade bootloader?
harpin14789 said:
I tried the latest Android N beta, so my bootloader is 71.21, when I went back to MM I never bothered to change my Bootloader because I didn't have any problems. Do you think that this is the main cause of the issues? Should I downgrade bootloader?
Click to expand...
Click to collapse
Ahah i knew it. The other guy on g+ also have latest bootloader. I'm not sure but it can cause problem
DO NOT DOWNGRADE. I don't know what would happen
If you really want to try it. Do it but make sure that you can and have abilities to recover the device from a hardbrick
At this moment i don't know how to fix that. I'm sorry but i gonna take some time for me to fix this unless you have an idea
[edit]
I have 2 people report that downgrading to 71.18 solve the issue
FOR DEVS AND USERS BEFORE FIGHT ME CLICK HERE!: https://forum.xda-developers.com/showpost.php?p=70362424&postcount=3
Code:
DISCLAIMER!!
I am not responsible in any way for anything that can be happen to your device when you flashing my kernels.You do so at your own risk!
Features
Anykernel:
- Anykernel2 zip for maximum compatibility with all ROMs, CrazyAquaKernel uses your existing ramdisk (Do NOT flash this over other custom kernels!You should only flash CrazyAquaKernel over the kernel that came with your ROM!!)
Toolchain:
UBERTC 4.9 Toolchain
CPU:
- governors:
elementalx
interactive
ondemand
zzmoove
ondemandplus
conservative
powersave
userspace
- input boost
IO schedulers:
bfq
tripndroid
cfq
noop
deadline
fiops
row
sio
siopilus
zen
vr
fifo
Thermal:
- msm thermal
GPU:
- Adrenoboost
More:
- init.d support
- insecure kernel (adb has root privileges)
- frandom
- PVS level info
- frandom
- notification led control
- kcal v2
- CRC Check Disabled
- Dynamic filesystem read-ahead
- A lot improvments
- A lot fixes
Download Link CrazyAquaKernel[AnyKernel]:https://www.androidfilehost.com/?w=files&flid=209599
Installation guide
Do NOT flash this over other custom kernels!
You should only flash CrazyAquaKernel over the kernel that came with your ROM!!
- Download Kernel from this thread
- Flash it with Recovery
[Wipe cache and Dalvik cache recommended]
- Then Reboot
Enjoy the CrazyAquaKernel !!!!
Credits
thx Eliminater74
thx Faux123
thx Savoca
thx RenderBroken
thx flar2
thx osm0sis
thx ShinyShide
thx bhb27
thx Lord Boeffla
thx the devs where made the cm14 bootable and working
thx CrazyGamerGR yeh me
XDA:DevDB Information
CrazyAquaKernel, Kernel for the LeEco Le Pro3
Contributors
CrazyGamerGR
Source Code: https://github.com/CrazyGamerGR/CrazyAquaKernel-llm2-llp3-los
Kernel Special Features:
Version Information
Status: Testing
Created 2017-08-25
Last Updated 2017-08-24
FAQ
Recommended app : Kernel Adiutor
changelogs
v1.0/24-08-17
- initial release
v2.0/4-9-17
- input boost
- frandom
- msm thermal
- many improvments under the hood
reserve1
reserve2
reserve3
HI @CrazyGamerGR
Can i try this on AICP?
saraprobe said:
HI @CrazyGamerGR
Can i try this on AICP?
Click to expand...
Click to collapse
Sure, aicp is lineageos based rom
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
Sure, aicp is lineageos based rom
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
what is the default governor
saraprobe said:
what is the default governor
Click to expand...
Click to collapse
Tweaked interactive
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
Tweaked interactive
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
Thanks-SW
I'm curious why you chose to base off of lineage, I've found omni to have better performance, and lineage has eas which won't work with the governors that you added
Sent from my LEX727 using XDA Labs
Is F2FS supported?
mosimchah said:
I'm curious why you chose to base off of lineage, I've found omni to have better performance, and lineage has eas which won't work with the governors that you added
Sent from my LEX727 using XDA Labs
Click to expand...
Click to collapse
I used for many months eas rom and kernel but never saw a battery difference than before,i focus more on cleaner source and some usefull features added ,i like more los because the updates
Sent from my iPhone using Tapatalk Pro
Hello there @CrazyGamerGR ! I recognize you from the OPO forum, good to see another familiar face here . I'll test your kernel in a week when my Le Pro 3 arrives
FunkyRasta said:
Hello there @CrazyGamerGR ! I recognize you from the OPO forum, good to see another familiar face here . I'll test your kernel in a week when my Le Pro 3 arrives
Click to expand...
Click to collapse
Hey m8,cool ^^
Sent from my iPhone using Tapatalk Pro
CrazyGamerGR said:
based on lineage os
Click to expand...
Click to collapse
So this will not work on PA?
it boots but performance is really bad, lag makes phone unusable
fantamadnesss said:
So this will not work on PA?
it boots but performance is really bad, lag makes phone unusable
Click to expand...
Click to collapse
Pa sometimes include some different commits maybe thats why
Sent from my iPhone using Tapatalk Pro
Sorry for the stupid questions but here we go:
Do I need to be rooted?
Do we still get Lineage OTA updates after flashing?
Do I need to re-flash after an update?
I try many roms and I had problems on all of them, some doesn't have VOLTE, all have bad audio and faulty fast charging.... going back to stock is too challenging for me...
and btw OEM usb cable is junk!!!
---------- Post added at 07:07 PM ---------- Previous post was at 06:52 PM ----------
update: after flashing this Kernel on LOS I now got fast charging and the LTE signal is not dropping when placing a call!! awesome, I'm not rooted,
But please let me know if I still get LOS ota updates and if I need to reflash it every time, thank you very much!!
Please add Otg-Ntfs_rw ?
Also flashed it... Runs really good! Keep on going dev!