Related
This is my modded kernel for Mediapad. Based on latest Huawei sources
Features:
-updated to newest stable kernel base (3.0.42)
-CPU CAN be overclocked up to 1,9 Ghz , on default boots at 1,2 Ghz, use SetCPU, Sytem Tuner or similar app to set desired freq
-Overclock'd 3D GPU @ 300Mhz (6 Stages 3D GPU scaling)
-Overclock'd 2D GPU @ 266Mhz(3 Stages 2D GPU scaling)
-Boosted L2 cache (1566 Mhz max)
-Increased bus frequency - 360 Mhz from 1,5 Ghz slot upwards
-governors: ondemand (default), badass, interactive, lazy, smartass2, lagfree, conservative
-VDD interface (undervolting range between 750-1350 mv) - to set with System Tuner app from the market
-complied with Snapdragon optimized flags (-O2)
-optimized CRC32 and ARM RWSEM Algorithm
-CPU-supported unaligned accesses
-SIO scheduler(default)
-XZ Kernel Compression -> smaller kernel size
-arkusuma's touchscreen driver mod
-JHASH v3
-KSM and Automatic process group scheduling
-JRCU
-Init.d support
-Fsync control more about this feature here
more on github...
https://github.com/bart594/mediapad_kernel
Thanks to:
SebastianFM, showp1984, simone201, franciscofranco, Ezekeel, faux123, arkusuma, aftersilence and all guys how are involved in development on many different platforms
Installation:
1. Use fastboot mode to flash boot.img
2. Copy all modules to \system\lib\modules
Good lecture about governors and how to tweak them[/SIZE]
http://forum.xda-developers.com/showthread.php?t=1369817
Changelog:
07.31 R00 initial version
08.01 R01 new govs: lagfree, smartass2, lazy, interactive; arkusuma's touchscreen driver mod updated (now you can customize it by yourself)
08.02 R02 undervolting fixed, LMK from kernel 3.4, 2D GPU scaling to save some juice, and other minor patches
08.04 R03 smartass tweaked a bit, new CPU OC steps (1,9 Ghz max), GPU 2D/3D OC, second core behavior fixed (it was ramping up to the max no matter what was set as max freq), recovery version thx to aftersilence!
08.07 R04 new governor: badass with two steps at 1188000 and 1512000 and tweaked for performance , fsync control, autobrightness driver: it reports now 6 levels but we need to edit framework to use those new levels
08.15 R05 updated to 3.0.40 plus some "under the hood" fixes
08.25 R06 clean start with all previous features on 3.0.41 base , i hope that i got rid of all those nasty random reboots (voltages are little bit higher on default), no CM9 support - its good enough on its own , fastboot version only (due to problems with recovery update script) , JRCU, autobrightness levels reworked once again, CAF patches
09.03 R07 cpu1 stall at 1,2 ghz fixed, CAF patches to gpu,videodecoder, hdmi, and framebuffer
09.05 R07_1 dialer reboot fixed
09.12 R08 LMK updated, kernel base updated
If someone want to help out with JB developing or has some other questions related to ROM/Kernel developing please use irc channel
#mediapad_dev on http://webchat.freenode.net
does it provide better battery life?
i don't now, i didn't test battery life that much
but higher cpu clocks usually means shorter battery life
Looks good. Can you add this to your kernel? http://forum.xda-developers.com/showthread.php?t=1792713
//ok sorry I didn't see it
it's already there:
-arkusuma's touchscreen driver mod
Already tried that! Mass improvement!!!
Thank you for the great work! Keep up that way and make MediaPad even better!
Tnx dude! Works, and looks fine!
athanaso77 said:
Already tried that! Mass improvement!!!
Thank you for the great work! Keep up that way and make MediaPad even better!
Click to expand...
Click to collapse
can you explain better what do you mean for "mass improvement"?
thanks
can i specify value for last mod of "touchscreen filtering" on this kernel?
Sent from my HUAWEI MediaPad using xda premium
If I tried to change the VDD with system tuner, it automatically jumps to 1350mv and stuck at that voltage.
bart594 said:
This is my modded kernel for Mediapad. Based on latest Huawei sources
PROBLEMS
-native WIFI Tehtering doesn't work -> blame Huawei for obsolete Wifi driver (on stock kernel too)
-there is no source for huawei's wifi driver so i needed a hack to make it work
Customization possibilities are a little bit limited because of this
Click to expand...
Click to collapse
Have you look at this (bcm4329):
https://android.googlesource.com/platform/hardware/broadcom/wlan
I haven't tried to compile it though.
rurou said:
If I tried to change the VDD with system tuner, it automatically jumps to 1350mv and stuck at that voltage.
Click to expand...
Click to collapse
You have right It's broken I will try to fix it
While you're at it, can you change the value of touch_thres in touchscreen mod for the default 10 (or 9?) to 25...or 20. Better yet, ask arkusuma for his latest mod where it's user adjustable
Sent from my HTC Glacier using Tapatalk 2
arkusuma said:
Have you look at this (bcm4329):
https://android.googlesource.com/platform/hardware/broadcom/wlan
I haven't tried to compile it though.
Click to expand...
Click to collapse
BCM4329 is actually the old driver. With ICS google introduced new bcmdhd driver
Huawei was so lazy and took old gingerbread driver, that's why thetering don't work
maybe you can add in some additional governor.
rurou said:
While you're at it, can you change the value of touch_thres in touchscreen mod for the default 10 (or 9?) to 25...or 20. Better yet, ask arkusuma for his latest mod where it's user adjustable
Sent from my HTC Glacier using Tapatalk 2
Click to expand...
Click to collapse
That's a good proposal!
I use S7-302u ,Android4.0.3,C232B001.
Can i flash this kernel ?
thank you for advice.
nice work, sounds good.
My Mediapad doesn't work with my Nikon D7000 DSLR together. (If I plug a Canon EOS in (which works), the D7000 works afterwords with DSLR Dashboard, Helicon Remote,... until I reboot my tablet again)
Sound strangs, I know! ^^ (But the D7000 is recognised always @ USB Host Controller and also at dmesg)
Maybe this kernel will help me!
Sorry, but I'm a newbie in generell (@ Android):
I tried already some firmwares to solve this, but only with the SD-card, which isn't very hard to do.
Can you make a more detailed install instruction?
With which firmware I can use this kernel mod?
many thanks
Michael
ZEII said:
I use S7-302u ,Android4.0.3,C232B001.
Can i flash this kernel ?
thank you for advice.
Click to expand...
Click to collapse
according to this
http://forum.xda-developers.com/archive/index.php/t-1743025.html
there is no difference between those two versions so i think you can safely flash the kernel. If it's for whatever reason not gonna boot up you can always revert to original kernel
empi00 said:
nice work, sounds good.
My Mediapad doesn't work with my Nikon D7000 DSLR together. (If I plug a Canon EOS in (which works), the D7000 works afterwords with DSLR Dashboard, Helicon Remote,... until I reboot my tablet again)
Sound strangs, I know! ^^ (But the D7000 is recognised always @ USB Host Controller and also at dmesg)
Maybe this kernel will help me!
Sorry, but I'm a newbie in generell (@ Android):
I tried already some firmwares to solve this, but only with the SD-card, which isn't very hard to do.
Can you make a more detailed install instruction?
With which firmware I can use this kernel mod?
many thanks
Michael
Click to expand...
Click to collapse
If you are on newest Android for Mediapad (ICS 4.0.3) you can flash the kernel
but i really don't now if its gonna help with your problem. I haven't touched USB part in the kernel (apart from regular linux kernel update)
To flash you need to use fastboot mode and those two commands
fastboot flash boot boot.img
fastboot reboot
To boot into fastboot just install Quick Boot from Google Play and choose Bootloader there
Introducing you to the first ever Custom Kernel for Micromax A116 Canvas HD!
WARNING:
I or xda is not responsible for any kind of damage to your device. Please use it at your own risk!
Click to expand...
Click to collapse
FEATURES:
Based on MyPhone Agua Iceberg source. (4.2)
Swap Support Added
Added config.gz support
Clean Cache Enabled
CIFS network file system support
LZMA Compression for zImage and Gzip for ramdisk.
1080p video recording support.
Enhanced hw composer.
Sweep2wake
Doubletap2wake
NTFS support.
Optimized imgsensor drivers
New LCM drivers for Vivid display colors.
VM Dirty ratio tweaks.
Battery drop fixed. Works perfectly
Added frandom driver.
Added Ramzswap support.
Optimized apply_slack() for size and speed
Faster NOATIME and NODIRATIME mounting flags
Enabled Dynamic Filesync Control 2.0
Lock the initial TCP window size to 64K
Asynchronous I/O latency to a solid-state disk greatly increased
Enabled ARCH_POWER
Added cdrom option to UMS-lun-devices (you can now use this app: Link)
Enabled SELinux and Full support for Android 4.4
GPU overlock @476MHz (not enabled by default)
Compile vfp with neon
MTK Vermagic Hack
Various ext4 patches
ACPI sysfs.c strlen fix
Fixed memory leak on extending regions
Random: Entropy tweaks
Tune conservative for performance
New governors added:
Smartass2
LulzactiveQ
PegasusQ
ZZMOOVE
NIGHTMARE
SAKURACTIVE
InteractiveX
Intellidemand
New IO Schedulers added
ROW
ZEN
FIOPS
FIFO
VR
Click to expand...
Click to collapse
Bugs:
None!
Please report bugs in the Bugs Report section!
Click to expand...
Click to collapse
Install Instructions:
Make a full backup of your current ROM.
Place the kernel zip in sdcard and reboot to recovery.
Mount /system.
Install kernel zip and reboot!
Click to expand...
Click to collapse
Changelog:
Alpha builds:
VERSION 0.1:
First build from 4.1 source
Boots on JB4.2
VERSION 0.2
Added 7 CPU Governors
SWAP support enabled
Enabled access to config.gz
VERSION 0.3
XZ Compression for zImage
Clean Cache Enabled
Added 4 new IO Schedulers
Stable builds:
VERSION 1.0
Fixed Camera FC
CIFS network file system support
Enabled 1080p Video Recording and Playback (not tested)
Optimized zImage for size
VERSION 1.1
Fixed Charging issue.
USB OTG fixed.
NTFS support enabled. (Not tested. Lol)
Built CIFS as module.
zImage size reduced by using LZMA compression.
Enhanced hw composer.
VERSION 2.0
MERGED SOURCE WITH 4.2 (MyPhone Agua Iceberg)
Overclocked GPU @ 403MHz
CAMERA FIXED!!
Optimized Imgsensor drivers (better camera colors).
New LCM drivers (vivid display colors).
Overclocked CPU @1.5GHz (only visual, lags a lot)
VERSION 2.1
Added new battery drivers from Kogan Agora HD+ (might fix battery drop, not tested).
Removed CPU overclock.
VM dirty ratio tweaks
Set VM_MAX_READAHEAD= 512KB
FIXED VOLUME KEYS!
VERSION 2.2
Battery drop fixed. Works perfectly Thanks to @banjo0917
Added frandom driver. (Faster random variable generation)
Added Ramzswap support.
Optimized apply_slack() for size and speed
Faster NOATIME and NODIRATIME mounting flags
Enabled Dynamic Filesync Control 2.0
Lock the initial TCP window size to 64K
Asynchronous I/O latency to a solid-state disk greatly increased
Enabled ARCH_POWER
VERSION 2.3
Fixed Graphics glitch (enabled sync)
Patched binder.c for Android 4.4 support
Added Intellidemand governor.
Added cdrom option to UMS-lun-devices (you can now use this app: Link)
Reduced modules size. Now kernel zip only 5mb (credits to @Dr-Shadow )
VERSION 2.4
Updated to Linux Kernel 3.4.16 (WIP updating to latest upstream 3.4.82)
Enabled SELinux and Full support for Android 4.4
GPU overlock @476MHz (not enabled by default)
Compile vfp with neon
MTK Vermagic Hack
Various ext4 patches
ACPI sysfs.c strlen fix
Fixed memory leak on extending regions
Random: Entropy tweaks
Tune conservative for performance
WIP, added support for A110Q (not this kernel though, will make a separate thread).
Many more patches, check github
VERSION 2.5
Camera works both on new and old hardware!
Optimized camera drivers for better colors
GPU overlock back to 403MHz (not enabled by default)
Added battery drop fix again (it was missing in V2.4)
Fixes for CIFS
af_unix: speedup /proc/net/unix
ext4: speed up truncate/unlink by not using bforget() unless needed
Optimize jbd2_journal_force_commit
fs: switch do_fsync() to fget_light()
Optimized ARM RWSEM algorithm(by @faux123)
Delayed stripe fix
Added tweak for more responsiveness
Add Ultra Kernel Samepage Merging feature
Fixed Fast battery drain
VERSION 2.6
Reverted back all changes after V2.3
Fixed Deep sleep and frequency scaling
Fixed CIFS
Added tweaks for more responsiveness
Camera works both on new as well as old hardwares
SELinux enabled
No battery drop. Expected to give the best battery backup like V2.3
Optimized camera colors
Fixed SOD.
VERSION 2.7
Added Sweep2wake feature
Added Doubletap2wake (big thanks to @bindassdost for s2w and dt2w )
Restore fixed battery drivers
If you want to include this kernel on your rom, please include a link to this thread in the OP.
Thanks.
Download Links:
Please read instructions before flashing!
Kash Kernel V0.1 (Alpha 1)
Kash Kernel V0.2 (Alpha 2)
Kash Kernel V0.3 (Alpha 3)
Kash Kernel Stable V1.0
Kash Kernel Stable V1.1
Kash Kernel Stable V2.0
Kash Kernel Stable V2.1
Kash Kernel Stable V2.2
Kash Kernel Stable V2.3
Kash Kernel Stable V2.4
Kash Kernel Stable V2.6
Kash Kernel Stable V2.7
Patches:
Camera Fix(only for V1.x)
Stock Kernel
GPU FIX (ONLY FOR V2.3)
GPU Overclock 476MHz (ONLY FOR V2.4)
GPU Overclock 476MHz (ONLY FOR V2.6)
GPU Overclock 476MHz (ONLY FOR V2.7)
ORIGINAL SOURCE: http://goo.gl/MwmSE1
Modified source: http://goo.gl/xLb6J0
Source for v2.x: https://github.com/kashifmin/KashKernel_4.2
Click to expand...
Click to collapse
CREDITS:
@banjo0917
@varun.chitre15
@darshan dazzGeek
@Dr-Shadow
@karandpr
@nikbbnik (for gpu overclock and camera drivers).
@is0l4ted
@princechandela
@GuneetAtwal (for patches)
@bindassdost (for porting s2w and dt2w to mtk)
And all others who help me by testing kernel and providing tips
XDA:DevDB Information
Kash KERNEL, a Kernel for the Micromax A116
Contributors
kashifmin
Kernel Special Features:
Version Information
Status: Stable
Created 2014-01-03
Last Updated 2014-01-07
Reserved
FAQ:
GPU overclock reduces performance on my phone. Why? OR I'm getting low scores on benchmark? OR I get low fps? (Don't be dumb to ask this question again and again).
A: I really don't know the reason. But if it doesn't work for you, download this and flash it using CWM/TWRP without wipe.
What is a kernel? Why should I install it?
A: Click here to know the answer.
How to Change RAMDISK ?
A: http://forum.xda-developers.com/showpost.php?p=52449925&postcount=525
Will this work on all MT6589 Phones?
A: NO!
Is this kernel compatible with all ROMs?
A: Yes. But for ROMs not based on stock, (like MiUi and ColoOS) you have to replace ramdisk.
Will this work on other clones like MyPhone A919i, Wiko Cink 5, Fly IQ451 ?
A: YES. It will work
Is this kernel recommended for daily use?
A: Yes!
My phone lags a lot on V2.0. Why?
A:Because you are on 1.5GHz by default. Download Set CPU from playstore and set max frequency to 1.2GHz.
What are the best governor+io combinations?
A: Hotplug+cfq, Smartassv2+cfd, Sakuractive+cfq. You can try others and report!
How to use doubletap2wake and sweep2wake?
A: Download trickster mod app from playstore, Open "specific" tab in that app and enable s2w, d2w. Also tick on kernel settings to make your settings stay after a reboot. Also Refer this post : http://forum.xda-developers.com/showpost.php?p=51893190&postcount=420
SCREENSHOTS: (credits to @princechandela and @Dhogai vannan )
Hi,
Thanks for your work, please can you tell me the rom than you're using.
I've test it on an home made rom mix from t5 and a919i but doesn't work.
I'm using cink five.
1st edit:
Just test it on last mmx a116 rom provide by cmahendra and it's ok.
Need to see difference between my rom.
2nd edit:
So I test a little more, about camera, front camera is ok.
When playing recorded videos screen get crazy (see attachments)
Videos are ok on youtube.
Compass is working.
Thanks
Good progress here! Good work
Regards.
Finally..Done a good work mate..
Sent from my Google Nexus 5 using XDA Premium 4 mobile app
finally some original development, wont be able to try this week i am on holidays, but surely next week.
You are awesome.
EDIT:
I have added 2 bugs on the main thread to the bug list, its the best place to report and track bugs.
Request everyone to add bugs to that list and provide reviews aslwell.
ct_moi said:
Hi,
Thanks for your work, please can you tell me the rom than you're using.
I've test it on an home made rom mix from t5 and a919i but doesn't work.
I'm using cink five.
1st edit:
Just test it on last mmx a116 rom provide by cmahendra and it's ok.
Need to see difference between my rom.
2nd edit:
So I test a little more, about camera, front camera is ok.
When playing recorded videos screen get crazy (see attachments)
Videos are ok on youtube.
Compass is working.
Thanks
Click to expand...
Click to collapse
A116 has an compass?
---------- Post added at 02:00 PM ---------- Previous post was at 01:57 PM ----------
kashifmin said:
Introducing you to the first ever Custom Kernel for Micromax A116 Canvas HD!
WARNING:
FEATURES:
Will be added in next build.(Coming soon..)
Bugs:
Install Instructions:
Changelog:
Alpha builds:
VERSION 0.1:
First build from 4.1 source
Boots on JB4.2
Please be patient, help me to fix bugs and add new features. Alpha builds are not recommended for normal use. New builds are coming very soon so please wait!!
Download Links:
CREDITS:
banjo0917
varun.chitre15
XDA:DevDB Information
Kash KERNEL, a Kernel for the Micromax A116
Contributors
kashifmin
Kernel Special Features:
Version Information
Status: Alpha
Created 2014-01-03
Last Updated 2014-01-03
Click to expand...
Click to collapse
If we flash this kernel how to get back to stock kernel?
arush15june said:
A116 has an compass?
Click to expand...
Click to collapse
ct_moi said:
I'm using cink five.
Click to expand...
Click to collapse
arush15june said:
If we flash this kernel how to get back to stock kernel?
Click to expand...
Click to collapse
Do a nandroid backup of your rom before flashing.
About the zip, did the mt6628_fm_xx_xx.bin doesn't need to be into directory KashKernel_Alpha1.zip\system\etc\firmware\mt6628\ ?
ct_moi said:
Do a nandroid backup of your rom before flashing.
About the zip, did the mt6628_fm_xx_xx.bin doesn't need to be into directory KashKernel_Alpha1.zip\system\etc\firmware\mt6628\ ?
Click to expand...
Click to collapse
It belongs to the firmware directory. I've added etc folder to fix Wifi and bluetooth.
I'm on stock 4.2 (P10) and clearly camera doesn't work for me.
Btw, it would be great if you people can fix camera by extracting necessary files from 4.1 because the camera works perfectly on 4.1. So, it means that it is not the problem with kernel.
kashifmin said:
It belongs to the firmware directory. I've added etc folder to fix Wifi and bluetooth.
I'm on stock 4.2 (P10) and clearly camera doesn't work for me.
Btw, it would be great if you people can fix camera by extracting necessary files from 4.1 because the camera works perfectly on 4.1. So, it means that it is not the problem with kernel.
Click to expand...
Click to collapse
Try the kernel on latest p18 user14 4.2
Sent from my Micromax A116 using xda app-developers app
@varun.chitre15 can easily fix such things. Kashif ask him, he can even build this kernel within no time.
And @ all please this is development thread keep thread clean. Only for devs not for users. (testers required) . Wait for stable build.
Does the compass work?
Sent from my Micromax A116 using xda premium
BogoMips
Bogomips on the original kernel are about 2400
With this kernel I have about 1500 bogomips
Great work buddy ... :thumbup:
Nice camera not working, I have tried stock & super Lenovo both not working, will try version2 now but final report may be delayed as I will to follow normal routine Monday.
Sent from my Samsung Galaxy S4 Mini GT-I9505 using xda app-developers app
Flashed kernel v0.2 on user 14(S9201_4.2_MP_F3F8_B1_IN_MMX_14_FLASHER_USER) ...Boots but Very laggy and hangs on v14 user of mmx cant even goto camera app from app drawer ...couldnt able to check swap and the governors ..will try once i flash older version of 4.2
Good going bro ..can u upload full buildable source of kask kernel ..im interested in building from source
Version 2 also same Resolution of front & rear camera show 5MP. Also Antutu score reduced from 13410 to 11760. Good luck buddy.
Sent from my Samsung Galaxy S4 Mini GT-I9505 using xda app-developers app
saxenaiway said:
Version 2 also same Resolution of front & rear camera show 5MP. Also Antutu score reduced from 13410 to 11760. Good luck buddy.
Sent from my Samsung Galaxy S4 Mini GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Are you able to see which parts decreased in Antutu? Was it the CPU score? I know that if you use some of the other governors instead of hotplug, some of the cpu cores get turned off and you'll only have 1 or 2 active.
suhas.holla said:
Flashed kernel v0.2 on user 14(S9201_4.2_MP_F3F8_B1_IN_MMX_14_FLASHER_USER) ...Boots but Very laggy and hangs on v14 user of mmx cant even goto camera app from app drawer ...couldnt able to check swap and the governors ..will try once i flash older version of 4.2
Good going bro ..can u upload full buildable source of kask kernel ..im interested in building from source
Click to expand...
Click to collapse
If you're talking about the alpha 2 then yes it will be laggy unless you change the governor.
And sorry bro, I have 30KB/s connection here so it is impossible to upload the full source, but I'll upload required changes.
saxenaiway said:
Version 2 also same Resolution of front & rear camera show 5MP. Also Antutu score reduced from 13410 to 11760. Good luck buddy.
Sent from my Samsung Galaxy S4 Mini GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Antutu score has gone down to around 10k, I think it is because of the unstable graphics. Thanks for informing me about the 5MP Camera, I will look into that in my next build.
kashifmin said:
If you're talking about the alpha 2 then yes it will be laggy unless you change the governor.
And sorry bro, I have 30KB/s connection here so it is impossible to upload the full source, but I'll upload required changes.
Antutu score has gone down to around 10k, I think it is because of the unstable graphics. Thanks for informing me about the 5MP Camera, I will look into that in my next build.
Click to expand...
Click to collapse
what is the default governor on alpha 2 ?...is it the same as that of stock kernel?
If not then make it stock kernel governer as default in next build then it will not lag
I am not the developer of this kernel. Harsh_it Jain is the developer of this kernel and I am only sharing it on his intructions
Only For Lollipop/Marshmallow Based 32Bit Roms
Compiled From Latest Linaro 5.3 Where As Phantom v1.0 Was From 5.1 Thereby Bringing More Awesomeness To Your Device.
------Phantom-2.0-------
Hello Guys I Harsh_it Jain Proudly Present To You my Latest work.
Phantom 2.0
Successor Of Phantom 1.0 Phantom 2.0 has a huge Lot Of Changes Comming To Features :-
New Multicore Descision Making Efficiency With reduced Latency
^^Fully Coded by Me (Used Simple Concept that we Use In 10th Class And All Here What I did Is just Coded One Script Worth 378 Lines - yup 378 line so what it Do is It will Check the workload and will use the Maximum Payload per core to finish the Work If payload exceeds 75% of the coreCpuFreq then The Other core Is automatically called with Already 25% of workQue Added To It With pagged and Swapped thereby Increasing Performance Drastically)
Badly Tweaked Thermal Engine
Increased Multicore Performance To Get Best Out Of Cores
This Summer Stay Cool With New Optimized Thermal Engine
Cpu oc 1.6 Gpu Oc 465mhz
Governers
1 Ondemand
2 interactive
3 Userspace
4 Elemental X
5 BioShock
6 LionFish
7 HellsActive
8 Alucard
9 Zzmoove
10 impulse
11 Ondemand Plus
12 Alucard
13 Nightmare
14 Darkness
15 Yankactive
16 Conservative
17 Powersave
18 Performance
Ton Of them and I Already Tweaked Them Badly Updated Alucard Zzmoove and Interactive to Latest With Franco Kernel Source , HellisCore Kernel Source Etc
I/O Schedulars
1:-Noop
2 Deadline
3 CFQ
4 BFQ
5 Zen
6 FIOPS
7 Row
(Updated Row Noop Deadline To Latest Possible Sources Where as 1.8 Driver VersioN for BFQ )
HotPlugs
1 - AutoSMP
2 - Intelliplug
3 - Mako
4 - Alucard plug
5 - MsmSleeper
(Updated Intelliplug To 5.0 and Powersuspend to 5.0 Alucard HotPlug To 3.2 Mako Ported From Nexus Directly Without Changes so I used Dummy FrequencY File dont cry that you see 18000 MHZ)
A Hell Lot Of tweakings
for Cpu and GPU
aggresive Battery Saving Tweaks
Click to expand...
Click to collapse
INSTRUCTIONS
Boot Into Recovery
Flash the provided Kernel Zip
Wipe Dalvik and Cache
Reboot To System
DOWNLOADS
Phantom Kernel 2.0 https://www.androidfilehost.com/?fid=4996503000517181796
Kernel Sources - https://github.com/amitwh/android_kernel_lenovo_wt86518/tree/mkl-mr1/arch
Reserved
mshoaib7 said:
I am not the developer of this kernel. Harsh_it Jain is the developer of this kernel and I am only sharing it on his intructions
Only For Lollipop/Marshmallow Based 32Bit Roms
INSTRUCTIONS
Boot Into Recovery
Flash the provided Kernel Zip
Wipe Dalvik and Cache
Reboot To System
DOWNLOADS
Phantom Kernel 2.0 https://www.androidfilehost.com/?fid=4996503000517181796
Kernel Sources - https://github.com/amitwh/android_kernel_lenovo_wt86518/tree/mkl-mr1/arch
Click to expand...
Click to collapse
Are you tested it?
nangdha said:
Are you tested it?
Click to expand...
Click to collapse
its already tested and it works like a beast
ScreenShots
Tested Working Good On Mokee A Good amount Of features
dev_harsh1998 said:
Tested Working Good On Mokee A Good amount Of features
Click to expand...
Click to collapse
Looks great.. I want to test it on miui7. But, how the battery?
---------- Post added at 15:53 ---------- Previous post was at 14:58 ----------
Unsucessfully flashed on MIUI7, stuck at lockscreen
nangdha said:
Looks great.. I want to test it on miui7. But, how the battery?
---------- Post added at 15:53 ---------- Previous post was at 14:58 ----------
Unsucessfully flashed on MIUI7, stuck at lockscreen
Click to expand...
Click to collapse
Which MIUI 7 ? Try it on MIUI 7 Russian build
mshoaib7 said:
Which MIUI 7 ? Try it on MIUI 7 Russian build
Click to expand...
Click to collapse
Yes, i was on Miui7 Rusian build version 6.4.28 already. Downloaded from here.
Now i switch back to gods kernel R1.
plzz give me the link of ur mokkee rom other wise give a fix for my mokee wifii bug
Har**** jain there is a bug wifi not working on my mokee rom plzz tell me a fix otherwise. Give the link of your mokee 32bit rom which u r using plzz reply fast
shivansh khare boy said:
Har**** jain there is a bug wifi not working on my mokee rom plzz tell me a fix otherwise. Give the link of your mokee 32bit rom which u r using plzz reply fast
Click to expand...
Click to collapse
1. Open terminal emulater
2. Type "su"(without quotes) and grant root access
3. Type "svc wifi disable"
4. Type "insmod /system/lib/modules/wlan.ko
5. Type "svc wifi enable"
Now your wifi should work. To avoid doing this on every reboot make init.d script for it
init.d script
I don't know how to make a init.d script plzz make it for me otherwise tell me the steps this trick is working thanks
Very nice:good:
shivansh khare boy said:
I don't know how to make a init.d script plzz make it for me otherwise tell me the steps this trick is working thanks
Click to expand...
Click to collapse
You can make init.d by KernelAdiutor btw..
Brother, please give me the script.
Loknath said:
Brother, please give me the script.
Click to expand...
Click to collapse
Extract and copy 01wlanon file in system/etc/init.d and reboot. If it doesn't work automatically after reboot, you will have to execute the script manually from Kernel Adiutor
Thanks brother it worked for me
Hey, Is there any problem if I use this kernel with exposed?
shivamgupta1996 said:
Hey, Is there any problem if I use this kernel with exposed?
Click to expand...
Click to collapse
Haven't tried it but it shouldn't create any problem
mshoaib7 said:
Haven't tried it but it shouldn't create any problem
Click to expand...
Click to collapse
Bruh, I extracted and moved the script file to init.d folder and rebooted but still wifi didn't worked.
Rom: cm13 32 -bit
shivamgupta1996 said:
Bruh, I extracted and moved the script file to init.d folder and rebooted but still wifi didn't worked.
Rom: cm13 32 -bit
Click to expand...
Click to collapse
You will have to manually execute the script from kernel adiutor app
This is extreme kernel!
Technical information:
The kernel of Linux: 3.4.0.
Latest version: 09/10/2016.
Version Nitrogen: 0.9.
Compiled by: GCC Linaro 4.9.4 arm-eabi.
Based on: AOSP.
Which devices: D820, D821
Sources: https://github.com/nitrogen-os-devices/nitrogen_kernel_lge_hammerhead
Download latsets builds: http://xyyx-dev.ru/nitrogen-os/nougat/hammerhead/addons/
Download releases: GitHub
Do not use Kernel Adiutor, this app is buggy, use Synapse app for set-up.
Features:
Add Overclock CPU up to 2.5 GHz
Add Underclock CPU up to 232 MHz
Add CPU voltage control
Add UKSM
Add simple GPU governor
Add MSM hotplug
Add MSM turbo
Add Use Android device as USB keyboard/mouse
Add USB fast charging support
Add Faux sound control
Add Faux speaker control
Add Faux gamma control
Add frandom
Add fsync on/of
Add ZRAM
SeLinux permissive
Add FIFO, SIO, SIO+, VR, ZEN I/O Schedulers
Add abyssplugv2, lionheart, pegasusq, uberdemand, wheatley, hyper, darkness, nightmare, ondemandplus, optimax, smartmax, yankdemand CPU Governors
Add stereo call recording support
Add Wakelocks on/of
Add kexec-hardboot
Add af_unix: speedup /proc/net/unix
Add backlight dimmer
Implement always on RGB LED support
Introduce builder and kernel packer
Use ondemandplus default cpu governor
Disable test iosched, uze VR by default
Enable NTFS FS and cpu voltage
init.d: add config
Enable LCD_KCAL
Enable all tcp congestions
Use westwood by default
New installer
XZ kernel compression
Build with Linaro 4.9.4
Overclock CPU up to 2.8 GHz
block: scheduler: add ZEN v2
Zen Sched: set fifo batch to 16 to reduce overload on eMMC and CPU
usb: gadget: mass_storage: added sysfs entry for cdrom to LUNs
Enable fastcharging by default
Enable MSM hotplug by default
Add franko thermal driver
Add double tap to wake touchscreen driver
Init included to ramdisk
Powersuspend
More logs
Thanks:
All for works
In the plans:
Your wishes
Not yet invented
XDA:DevDB Information
Nitrogen Extreme Kernel, Kernel for the Google Nexus 5
Contributors
Mr.MEX
Kernel Special Features: TWRP, Android 7
Version Information
Status: Stable
Current Stable Version: 0.9
Stable Release Date: 2016-10-10
Created 2016-09-12
Last Updated 2016-10-10
All are asked to F2FS, personal experience convinced that f2fs slightly slower than the well-tuned EXT4. So, no, f2fs in the nucleus and never will be. There is such a thing as a placebo effect, to me, he never acted, so I'm up to 100% affirm that f2fs slower EXT4. More practice shows that F2FS retains a memory of more than EXT4 but it's just a few months. I do not see after all the above make any sense to add it to the core. There are other, EXFAT, NTFS and so on, this is really useful and F2FS - pampering. Please understand and forgive: D
awesome, is this 1st nougat focused kernel??
SH1M4BD3 said:
awesome, is this 1st nougat focused kernel??
Click to expand...
Click to collapse
Yes
thaks so much, so the latest one was 04??, flashed an now im ready to test and tunes some features
SH1M4BD3 said:
thaks so much, so the latest one was 04??, flashed an now im ready to test and tunes some features
Click to expand...
Click to collapse
Yes. 0.4
I don't see the 12-9-2016 file, is 10-9-2016 the newest?
That is what I am running and its damn fast man. Very good, thanks much!
Sent from my Nexus 5 using Tapatalk
I have some questions regarding this kernel.
Anyone tested this kernel on Santhosh M built?
Is i necessary to flash WiFi fix?
Does YouTube work? Even on 1080p?
Video recording through camera in 1080p does it freeze image but sound still runs?
Thank you very much!
Anyone tested this kernel on Santhosh M built? no, i use aosp base.
Is i necessary to flash WiFi fix? no
Does YouTube work? Even on 1080p? case of any kernel
I.m.Tuga said:
I have some questions regarding this kernel.
Anyone tested this kernel on Santhosh M built?
Is i necessary to flash WiFi fix?
Does YouTube work? Even on 1080p?
Video recording through camera in 1080p does it freeze image but sound still runs?
Thank you very much!
Click to expand...
Click to collapse
Amazing job!!
Mr.MEX said:
Anyone tested this kernel on Santhosh M built? no, i use aosp base.
Is i necessary to flash WiFi fix? no
Does YouTube work? Even on 1080p? case of any kernel
Click to expand...
Click to collapse
Ok just made a backup and tried this kernel with Santhosh M built and it works perfectly.
WiFi, YouTube 1080p even in 60fps. 1080p recorded videos.
Installed kernel audiutor and even the colour profiles works.
Now this, is awesome. Thank you! Works flawlessly.
Whats the description for each governor? Where can i find it?
quimbexa said:
Whats the description for each governor? Where can i find it?
Click to expand...
Click to collapse
Google
Sent from my N5 (Nougat)
I don't think that having a ton of governors & hotplugs is better than having one well-optimized governor which works out well with one hotplug. I'd prefer an optimized interactive/ondemand with boost'n'crap rather than a zoo of governors.
No satured colors
Gallardo994 said:
I don't think that having a ton of governors & hotplugs is better than having one well-optimized governor which works out well with one hotplug. I'd prefer an optimized interactive/ondemand with boost'n'crap rather than a zoo of governors.
Click to expand...
Click to collapse
Man, I do all, to each his own)
Malfito said:
No satured colors
Click to expand...
Click to collapse
ok i fixed in new version, cooming soon
Mr.MEX said:
ok i fixed in new version, cooming soon
Click to expand...
Click to collapse
:good:
Kernel running good so far. Thanks for your work!
Any recommended settings for governor and hotplug?
And is there any chance for adding DT2W?
Thanks in advance!
Sent from my Nexus 5 using XDA-Developers mobile app
Flashed the kernel with Santhosh's AOSP ROM... Awesome kernel.. But I don't get any messages from hangouts when the phone is asleep..I get all the messages when I open the app. Is the kernel killing all the background apps?
Sent from my Nexus 5 using Tapatalk
Code:
Disclaimer
#include
*
* [B]Your warranty is now void.[/B]
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Welcome to hadesKernel
Some personal thoughts:
- this kernel works only on J5 2015 versions. I`m not responsable for what can happen if you flash on other devices.
- v2.3 for J5 already includes all the previous things from A5 releases.
- if you take any of my work without my permission i'll report you, and you'll probably get banned.
- you should read at least install instructions stated in this post - i won`t offer support for any issues regarding installation;
- bug reports without device variant and logs can't be considered bugs - make sure you provide detailed info when reporting bugs;
- press 'Thanks' button instead of saying it - it will keep the thread clean and keep me motivated to do more;
- feel free to donate to me if you want to support my work.
Features:
Aroma Installer with root options
SuperSU 2.79 SR3
Magisk v12.0
OTG support enabled
Private mode (for roms that support that feature)
knox 0x0 - borrowed some things from magisk and from @Bulgaricus
CPU overclock to 1.5Ghz
GPU overclock to 720Mhz
J500HXXU2BPK4 update - December security patches
Adreno Idler
intelli_thermal
nvidia relaxation patch
undervolt
Color calibration
prima wlan driver
fast, stable and cool
Latest ramdisk
Permissive kernel
init.d support
maybe more - will update when remember...
Devices:
J500F
J500FN
J500G
J500M
J500H
Bugs:
None (see FAQ on #3 post for any issues)
Instructions:
make sure you have TWRP from here installed (or any other with Aroma Installer support)
download zip and put it into phone's storage
enter TWRP recovery
flash zip
reboot and enjoy
Downloads
Credits:
*DjSteve
*Lord Boeffla
*psndna88
*Bulgaricus
*SuperR
*Faux123
*duki994
*kernel testers
*if i missed someone PM me and i`ll add
XDA:DevDB Information
hadesKernel v2.5, Kernel for the Samsung Galaxy J5
Contributors
corsicanu
Source Code: https://github.com/corsicanu/hadesKernel
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: v2.5
Beta Release Date: 2017-04-26
Created 2017-02-21
Last Updated 2017-07-03
Reserved
Changelog:
v2.5R - 06.06.2017
fixed private mode for roms that support this feature
v2.5 - 26.04.2017
fixed heating on A500G
fixed wifi
re-fixed camera for J5 family
added i/o schedulers back
v2.4 - 25.04.2017
kernel built permissive to avoid some issues
updated ramdisk to latest official fw
added root options in Aroma
added Magisk as root option
removed charging limit for some devices
disabled modules unload
reworked modules implementation,
*now you can switch to any other kernel without wifi or FM Radio issues
reworked knox 0x0 script
revert update to linux 3.10.60 for now
revert add more governors for now
revert add hotplugs for now
revert add i/o schedulers for now
v2.3 - 05.04.2017
fixed camera focus for J series
added support for A500W and A500K
updated to linux 3.10.60
added more governors (alucard/lionfish/barry_allen/intelliactive - these can be unstable-use interactive if you have issues)
added hotplugs (intelliplug/bricked hotplug/alucard/msm_hotplug)
added i/o schedulers (vr/fiops/sioplus/zen) and set FIOPS as default
knox 0x0 - borrowed some things from magisk and from @Bulgaricus
updated powersuspend
ramdisk tune-ups
cpufreq tune-ups
memory/cache tune-ups
v2.2 - 20.02.2017
added support for J5 2015 (J500xx)
added usb fast charge
made cubic tcp default for better net speeds
disabled software CRC for better performance
optimized framebuffer for better performance
added regulator for overclock
undervolted for better battery
lowered safe frequency from 400 to 200mhz
A5S deepsleep fix
added nvidia relaxation patch for better battery
enhance power efficiency
implement fast idling of CPU
reduced high-load and average-load for better battery
enabled arch_power
lowered throttle threeshold and enable it by default
v2.1 - 10.02.2017
Fix FM Radio
Fix OTG for all versions
Fix overheating issues for G
Add support for A3FU
Add SuperSU-v2.79-SR3
v2.0 - 25.01.2017
J500HXXU2BPK4 update - December security patches
Add support for A500H/A500S versions
Add builtin wlan module
Add westwood tcp and make cubic default again
Adreno Idler 1.1, fixed msm_adreno_tz
Add powersuspend
More msm-thermal tweaks
kernel: reduce overheat
Enable multi-core power savings
Add SuperSU SR5 back
Fix Deepsleep for F/G/M
Add 50Mhz and 100Mhz frequencies for low consumption when awake (AOD)
Add dynamic sync 2.0
Add lcd notify
xz: Optimize Sfck Compression
Added Aroma Installer
v1.4 - 22.12.2016
Fixed wifi again for each version
Multitask and battery optimisations + permissive mode enabled
Fix for frequencies not sticking at boot
ramdisk cpu / io / battery tune-ups
Add specific ramdisk for each supported variants
Separate SU from ramdisk
Fixed Kcal (color calibration)
V1.3 - 15.12.2016
add KCAL driver
4sysctl: favor filesystem
GPU OC to 720Mhz
Reverted CPU OC to 1.5Ghz
Fixed wifi for A500G
V1.2 - 11.11.2016
A500FU SuperSU SR3 patch + init.d support
SuperSU SR3 patch + init.d support
Experimental wifi fix
A500FU support
Switch to CUBIC TCP congestion control
arch/arm : compile with hardfloat + neon-vfpv4"
Tune-up for Cortex A53/ARMv8 architecture
V1.0 - 08.11.2016 - initial release
A500GXXU1CPH4 update
OTG and permissive enabling
free-mem optimisations
added SU patched ramdisk
2.07Ghz CPU OC
Enable neon and VFPv3
enable xz compression
Reserved
FAQ:
Q: My wifi is broken after flash. What to do?
A: Flash latest modem available for your device.
Q: Can`t connect to wifi network. What to do?
A: Reboot the phone, reboot the wifi router/ap, make sure you don`t have mac filtering enabled on ap/router.
Q: MAC adress has changed. What to do?
A: There is nothing you can do. That happens because of newer wifi module, built along with kernel, from the latest sources. If you can`t connect see Q2 above. I won`t change back to legacy wifi modules, at least not now.
Q: Device appears as "unauthorized" in adb and notification to authorize doesn`t appear. What to do?
A: Enter developer options, disable usb debugging, wait 30 seconds and re-enable it. Now you should see the notification to allow debugging.
Q: loading
A: loading
One more just in case of need
Deleted.
#Henkate said:
It's nice to see you here.
Click to expand...
Click to collapse
Multumesc!
Great .
Fast Kernel, Stable. (First really good kernel for J5)
From the tester to this build your kernel has worked perfectly. (Commenting here your tester)
My new rom with your kernel is amazing.
Cheers! :highfive:
Thanks @corsicanu ..
I'm using this kernel on my Stock 6.0.1 rom & I must say that this is one of the best kernels for J5.. Its very fast & stable..
Thank You So Much..
---------- Post added at 09:04 AM ---------- Previous post was at 08:59 AM ----------
By Zonik said:
Great .
Fast Kernel, Stable. (First really good kernel for J5)
From the tester to this build your kernel has worked perfectly. (Commenting here your tester)
My new rom with your kernel is amazing.
Cheers! :highfive:
Click to expand...
Click to collapse
Hi @By Zonik ..
Waiting for your rom (v2) bro..
Some q's
Fast charge as in fast charge?? Does our present kernels support that, beacause it's pretty slow.
Any plans to follow it up for a non touchwiz based rom??
does it support skies rom beta ??
corsicanu said:
One more just in case of need
Click to expand...
Click to collapse
Does the kernel work well with a single processor at the frequency of 50Mhz?
If you set a different GPU frequency to 720Mhz when the GPU is at 100%, is the Max frequency set or rising to 720 ignoring the set frequency? ?
Finally something interesting for the lands of the J5
For me the link doesnt work i just get this:
YuZaGa said:
Fast charge as in fast charge?? Does our present kernels support that, beacause it's pretty slow.
Any plans to follow it up for a non touchwiz based rom??
Click to expand...
Click to collapse
I will quote my friend @Bulgaricus for this
...we force supporting devices such as laptops and desktops that have fast charge to provide the quick charger to our phone.
I will see what can be done in the future for non touchwiz.
Super.Mody said:
does it support skies rom beta ??
Click to expand...
Click to collapse
From what i know Skies Rom is based on touchwiz so it will work. Test and report.
paulo boë said:
For me the link doesnt work i just get this:
Click to expand...
Click to collapse
Just wait more or refresh the page.
Demicro said:
Does the kernel work well with a single processor at the frequency of 50Mhz?
If you set a different GPU frequency to 720Mhz when the GPU is at 100%, is the Max frequency set or rising to 720 ignoring the set frequency? ?
Finally something interesting for the lands of the J5
Click to expand...
Click to collapse
I added 50Mhz for some certain scenarios, to step down the freq if the load is small - screen on but idle (i have screen timeout set to 10mins), or screen off and awake (for AOD on the roms that have it-my rom for A5). Anyway i have custom script in ramdisk that bypasses stock init.qcom.post_boot.sh and sets custom loads for all the frequencies, so the device can go down even to 50Mhz, but step up if the load is reached, so it doesn't lag at all.
About gpu - from what i saw it sticks to maximum set (i use kernel adiutor).
I mostly cherry-picked features and fixes, even from your j5(6) kernel [emoji16] since all are based on same soc. This project started as personal kernel, permissive with otg enabled (because A series has OTG disabled by Samsung), and after that decided to add more things and make it public.
Cheers!
Sent from my SM-N930F using Tapatalk
OMG ITS SO SMOOOOOOTTHHHHH. I bearly have any lag:laugh::victory:
Demicro said:
Does the kernel work well with a single processor at the frequency of 50Mhz?
If you set a different GPU frequency to 720Mhz when the GPU is at 100%, is the Max frequency set or rising to 720 ignoring the set frequency? ?
Finally something interesting for the lands of the J5
Click to expand...
Click to collapse
corsicanu said:
About gpu - from what i saw it sticks to maximum set (i use kernel adiutor).
Sent from my SM-N930F using Tapatalk
Click to expand...
Click to collapse
You can see the GPU frequency in real time by using these commands in Terminal (PC):
Code:
adb shell
cd /sys/devices/soc.0/1c00000.qcom,kgsl-3d0/devfreq/1c00000.qcom,kgsl-3d0
while true; do cat trans_stat; busybox sleep 0.1; done
1) The path may be different.
2) The current GPU frequency is the one with the asterisk.
3) Total transictions means the total switches between GPU frequencies.
Try these commands to confirm that the GPU frequency is stuck at 720.
We can bring the current fast charging also on custom roms or even improve the fast charging to support custom mAh and stuff like that. But forcing a battery to charge faster than it's limit can demage and reduce the battery life drastically so I think we will leave it just like that. Greetings
corsicanu said:
From what i know Skies Rom is based on touchwiz so it will work. Test and report.
Click to expand...
Click to collapse
Skies Rom beta is a Note 7 Port rom .. so it is Grace UX not touchwiz ..
corsicanu said:
I will quote my friend @Bulgaricus for this
...we force supporting devices such as laptops and desktops that have fast charge to provide the quick charger to our phone.
I will see what can be done in the future for non touchwiz.
From what i know Skies Rom is based on touchwiz so it will work. Test and report.
Just wait more or refresh the page.
I added 50Mhz for some certain scenarios, to step down the freq if the load is small - screen on but idle (i have screen timeout set to 10mins), or screen off and awake (for AOD on the roms that have it-my rom for A5). Anyway i have custom script in ramdisk that bypasses stock init.qcom.post_boot.sh and sets custom loads for all the frequencies, so the device can go down even to 50Mhz, but step up if the load is reached, so it doesn't lag at all.
About gpu - from what i saw it sticks to maximum set (i use kernel adiutor).
I mostly cherry-picked features and fixes, even from your j5(6) kernel [emoji16] since all are based on same soc. This project started as personal kernel, permissive with otg enabled (because A series has OTG disabled by Samsung), and after that decided to add more things and make it public.
Click to expand...
Click to collapse
I know, that you have cherry pick from me?
I also found something interesting in your code
Referring to the intelli thermal, I do not know why faux124 used a different thermal control for the TSEN8974. I found that version 1 gives some errors in the logcat when I boot up the phone
I also started my kernel for personal use, specifically to be able to use viper4 ? I just needed the kernel to be permissive. And now look where the kernel go
Super.Mody said:
Skies Rom beta is a Note 7 Port rom .. so it is Grace UX not touchwiz ..
Click to expand...
Click to collapse
Grace UX is touchwiz based. Non tw roms are lineage, cyanogenmod, or any other that uses AOSP as base.
Sent from my SM-N930F using Tapatalk
Demicro said:
I know, that you have cherry pick from me?
I also found something interesting in your code
Referring to the intelli thermal, I do not know why faux124 used a different thermal control for the TSEN8974. I found that version 1 gives some errors in the logcat when I boot up the phone
I also started my kernel for personal use, specifically to be able to use viper4 ? I just needed the kernel to be permissive. And now look where the kernel go
Click to expand...
Click to collapse
I removed it from features/changelog since isn`t activated yet. I saw too late in msm8916 defconfig the CONFIG_THERMAL_MONITOR=y so the intelli_thermal isn`t there yet. I can`t even finish the build (lots of errors), and you have errors in logcat ?. You are way far than me. For now i didn`t had time to chase those errors. I`ll look more maybe next week. Anything else interesting in my source? ?
Cheers!