Bricked after MM update (KIW-L21) - Honor 5X Questions & Answers

Hello,
I have a huge problem with meinm Honor 5X KIW - L21 .
I wanted to flash the OTA update B320 today .
Before I made ​​it , I have the original recovery installed and the Honor unrooted .
After that I carried out the OTA update . This then broke off with an error .
Now I wanted the Honor boot , but it hangs while Honor logo .
I can not reboot into bootloader .
The only thing that is still possible , the boot into the recovery .
Can the phone still somehow save ?

bly2 said:
Hello,
I have a huge problem with meinm Honor 5X KIW - L21 .
I wanted to flash the OTA update B320 today .
Before I made ​​it , I have the original recovery installed and the Honor unrooted .
After that I carried out the OTA update . This then broke off with an error .
Now I wanted the Honor boot , but it hangs while Honor logo .
I can not reboot into bootloader .
The only thing that is still possible , the boot into the recovery .
Can the phone still somehow save ?
Click to expand...
Click to collapse
There is no OTA marshmallow update for the KIW L21 yet
Think you might have flashed KII L21 update instead
Sent from my KIW-L21 using Tapatalk

No, the statement is false . I was offered this morning on the App HiSuite the OTA update .

Have you tried the pc program to do a recovery or maybe reply update thru the recovery .... Yes the KIW has the B320 update I'm using it right now ...

I do not have the files . And can download they nowhere . At least for the KIW - L21

bly2 said:
No, the statement is false . I was offered this morning on the App HiSuite the OTA update .
Click to expand...
Click to collapse
My mistake I've just seen the update now
Is it any better performance wise?
lharp1977 said:
Have you tried the pc program to do a recovery or maybe reply update thru the recovery .... Yes the KIW has the B320 update I'm using it right now ...
Click to expand...
Click to collapse
Sent from my KIW-L21 using Tapatalk

don't worry
- turn device off
- put USB-cable in your pc (with drivers and adb/fastboot installed)
- press vol-down and power simultan und plug in USB-cable in your phone within one second
- now you are in bootloader-mode
- flash TWRP and do anything you want (restore a backup, flash rom ...)
- I would advise to flash a rom from xda with TWRP instead of ota or update.app through stock-recovery (only problems!)

So far so good , pretty snappy , batt seems ok . Going on third day with this update . Ui changes in where stuff is located and finally batt percent inside the icon Yeah ... Had some trouble with swipe to unlock while charging butt could have just been the theme.... I use perf mode 90 percent the time I don't like the smart mode at all....

lharp1977 said:
So far so good , pretty snappy , batt seems ok . Going on third day with this update . Ui changes in where stuff is located and finally batt percent inside the icon Yeah ... Had some trouble with swipe to unlock while charging butt could have just been the theme.... I use perf mode 90 percent the time I don't like the smart mode at all....
Click to expand...
Click to collapse
Cool. Still waiting on my KII-L21 (GR5) Nigerian region. No update yet. I keep refreshing Updater everyday. Twice a day even. Nothing.
Plan is when it finds the update, i flash back my stock recovery and update normally. But already getting so impatient. Thinking of moving to CM soon.

Kiw L21 rolled out yesterday dont have the update yet it takes some time. De you have to be fully stock to receive the update? Did you upgrade from B130 or B140?

I'm full stock was B140 with unlocked boot. I tried some Roms but none have FW support afaik so I went back to stock no root. I found the update thru the updated Hicare app not the one already installed but the one the pc program installs....

You have to upgrade from within the HiCare app, select service, then OS Upgrade early adopters.

minty1978 said:
You have to upgrade from within the HiCare app, select service, then OS Upgrade early adopters.
Click to expand...
Click to collapse
Noob question: So this means the update is not "officially" out, but rather some kind of public beta where you can enlist for?

GeForce66 said:
Noob question: So this means the update is not "officially" out, but rather some kind of public beta where you can enlist for?
Click to expand...
Click to collapse
It is the official update. From what I understand, the update normally rolls out in stages. You simply 'jump the queue' by downloading it through the early adopters option..

Related

BKL-L09C765 Update Discussion

Updated- changed the title to be more generic for device rather than just an update/build.
Hi folks,
As title says, this full firmware is available now on FF so you can just dload for update or can use in case phone is soft bricked. This is the first full firmware available for Indian variant on FF.(b151 system img was shared long back).
Note- OTA has already started rolling out a week back and many has received the same. OTAs are coming in batches and should reach everyone by 3rd August as per info i have.
shashank1320 said:
Hi folks,
As title says, this full firmware is available now on FF so you can just dload for update or can use in case phone is soft bricked. This is the first full firmware available for Indian variant on FF.(b151 system img was shared long back).
Note- OTA has already started rolling out a week back and many has received the same. OTAs are coming in batches and should reach everyone by 3rd August as per info i have.
Click to expand...
Click to collapse
I have tried the full ota but it's not Woking?
1) I habe downloaded all thee folders.
2) creates dload folder in my memory card.
3) unzip update.zip and extracted update.app and pastes in dload folder.
4) switch off the phone and started with vol+ - vol- - power.
Update start but it failed on 5 percent.
Also i found weired issue in my rom that I don't have update option only in settings
Rj_Param said:
I have tried the full ota but it's not Woking?
1) I habe downloaded all thee folders.
2) creates dload folder in my memory card.
3) unzip update.zip and extracted update.app and pastes in dload folder.
4) switch off the phone and started with vol+ - vol- - power.
Update start but it failed on 5 percent.
Also i found weired issue in my rom that I don't have update option only in settings
Click to expand...
Click to collapse
You need to flash the 2nd file for getring back the update option.
Haven't you gor the ota yet?
im getting error while downloading via android app and strangely the the update for this phone is not being shown on pc version of the app
aditya desai said:
im getting error while downloading via android app and strangely the the update for this phone is not being shown on pc version of the app
Click to expand...
Click to collapse
You may wait for couple of days as rollout shoukd complete for all users by 3rd August. I got on my debrnaded phone.
shashank1320 said:
You need to flash the 2nd file for getring back the update option.
Haven't you got the OTA yet?
Click to expand...
Click to collapse
2nd file????
1) Update_data_full_public.zip
2) update.zip
3) update_Full_BKL_L09I_hw_in.zip
So can you guide me which file I should flash to get update option?
I have tried update.app from a update.zip file but that's not working.
---------- Post added at 07:12 PM ---------- Previous post was at 06:48 PM ----------
Rj_Param said:
2nd file????
1) Update_data_full_public.zip
2) update.zip
3) update_Full_BKL_L09I_hw_in.zip
So can you guide me which file I should flash to get update option?
I have tried update.app from a update.zip file but that's not working.
Click to expand...
Click to collapse
Thanks,
I have figured it out. I have taken second zip file from khera's rom and rename the file to update.app and it's upgraded and now I got OTA update for the new version.
Its better factory reset your phone if you are coming from custom rom.
After update i had so many bugs, but after reset everynrjg is smooth and fine.
Just got the b162 via OTA with August security patches.
shashank1320 said:
Just got the b162 via OTA with August security patches.
Click to expand...
Click to collapse
Please upload it to ff
mondalakash said:
Please upload it to ff
Click to expand...
Click to collapse
Try checking. I just randomly checked and it appeared. Can wait as no change apart from addressing CVE issue as announced in august 2018.
https://consumer.huawei.com/en/support/bulletin/2018/8/
shashank1320 said:
Try checking. I just randomly checked and it appeared. Can wait as no change apart from addressing CVE issue as announced in august 2018.
https://consumer.huawei.com/en/support/bulletin/2018/8/
Click to expand...
Click to collapse
Got the update the device is butter smooth right now after the update
Anyone get b168 yet on the c675?
Cpuburn said:
Anyone get b168 yet on the c675?
Click to expand...
Click to collapse
It's not available right now... It will available by end of the only.
Just read where b170 is available OTA for c675?
Anyone get it?
br54 said:
Just read where b170 is available OTA for c675?
Anyone get it?
Click to expand...
Click to collapse
I havent got it yet!! But in 1-2 days, i will get it.If you want to know more about it! Download honor club app and see there!! People are posting reviews there!!
Gpu turbo for Indian variant. Captured from honor club India.
What is in the Update??
1. Gpu Turbo
2. AIS Feature
3. User Agent Supported for airtel
4. Google security patch merge
5. Some Minor bugs improvements..
Forgot to capture it to ff
Got the update finally... Indian variant.
Finally update received for my rebranded phone!!
Just received normal OTA

//SM-G930A\\ **Stock Oreo ADB SIDELOAD**

YOU CAN FIND THE FULL G930AUCU8CSA3 FIRMWARE HERE:
https://forum.xda-developers.com/att-galaxy-s7/how-to/g930a-oreo-8-0-stock-att-odin-files-t3869871
G930AUCU4CRE4 to G930AUCS4CRG5:
Download link: https://drive.google.com/file/d/1MoJ0be2exLMoji2ZURR6tbEiHCqWSszG/view
G930AUCS4CRG5 to G930AUCU4CRI2:
Download link: https://drive.google.com/file/d/1Fdrcy4m49Qtl-__dUE0Etuqmyn8UhYbe/view
G930AUCU4CRI2 to G930AUCS8CRJ2
Download link: https://drive.google.com/file/d/1bhVx5Rt_CTXmG5YQrY5azS10RO3lWj1r/view
G930AUCS8CRJ2 to G930AUCS8CRK1
Download link: https://drive.google.com/file/d/1lepPXVZIiZM4i_VMOUOvDvVHvGY4ifwv/view
G930AUCS8CRK1 to G930AUCS8CRL1
Download link: https://drive.google.com/file/d/1CUJOVWnDsk3LL378vxLO0vp8y3AdQjmr/view
If i helped you don't forget to hit thanks button
G930aucu4cri2
friend you have the security patch of August 1 the new update its version is G930AUCU4CRI2 weighs between 456MB or 472MB
Juliowwwe said:
friend you have the security patch of August 1 the new update its version is G930AUCU4CRI2 weighs between 456MB or 472MB
Click to expand...
Click to collapse
Link is UP
thank you very much
thank you very much
New October update is UP
Hello,
How to install these updates ?
I've succeed to install the 8.0 update with ODIN and with 4 files : AP & BL & CP & CSC.
But here there is no such files into the updates you uploaded.
lahlah said:
Hello,
How to install these updates ?
I've succeed to install the 8.0 update with ODIN and with 4 files : AP & BL & CP & CSC.
But here there is no such files into the updates you uploaded.
Click to expand...
Click to collapse
1.) Turn off the phone. Hold down Volume Up + Home + Power until you see a little Android guy. It will say Applying System Update or something like that possibly, and just let it do it's thing until a menu comes up.
2.) Select "Apply update from ADB". You can scroll using the volume buttons and select using the power button.
3.) Make sure you have ADB and the proper drivers installed on your PC:
http://dl.adbdriver.com/upload/adbdriver.zip
4.)Put the firmware in the ADB folder. You can rename it to anything easy to remember like "FIRMWARE".
5.) In the ADB folder, hold SHIFT + right mouse click and choose "Open command window here". Then type the command "adb sideload FIRMWARE" (where FIRMWARE is how you named your file).
6.) Wait patiently.
7.) The phone will reboot and will hang at AT&T logo. This can take another 10 minutes, just wait until it's done
Ok, so I'm a novice at best on flashing with Odin... just flashed my AT&T S7 for the second time today, loading the SM-G930U version of Oreo (G930UUEU8CRJ2).
My understanding is that the 8 in the firmware version (G930UUEU8CRJ2) indicates that it is bootloader v. 8. I also understand that once you update the bootloader, it is impossible to downgrade it... So when I realized I couldnt enable Wifi calling on SM-G930U firmwares I thought I would flash back to the AT&T firmware, and then debloat it to improve the performance. But i cant find an SM-G930A Oreo Rom with BL v. 8.
I thought this one might be, but the 3 files seem to be independant of each other, and the 3rd file that lloked like it might be BL8, is less than 50MB...
So Im hoping you can provide some guidance, and im hoping i didnt shoot myself in the foot with this SM-G930U firmware.
Thank you
Sam
samhnky said:
Ok, so I'm a novice at best on flashing with Odin... just flashed my AT&T S7 for the second time today, loading the SM-G930U version of Oreo (G930UUEU8CRJ2).
My understanding is that the 8 in the firmware version (G930UUEU8CRJ2) indicates that it is bootloader v. 8. I also understand that once you update the bootloader, it is impossible to downgrade it... So when I realized I couldnt enable Wifi calling on SM-G930U firmwares I thought I would flash back to the AT&T firmware, and then debloat it to improve the performance. But i cant find an SM-G930A Oreo Rom with BL v. 8.
I thought this one might be, but the 3 files seem to be independant of each other, and the 3rd file that lloked like it might be BL8, is less than 50MB...
So Im hoping you can provide some guidance, and im hoping i didnt shoot myself in the foot with this SM-G930U firmware.
Thank you
Sam
Click to expand...
Click to collapse
The bootloader binary was updated to 8. After you flash this you'll be stuck on Oreo.
Full firmware for G930A G930AUCS8CRJ2 will be uploaded later today.
stek-kravari said:
The bootloader binary was updated to 8. After you flash this you'll be stuck on Oreo.
Full firmware for G930A G930AUCS8CRJ2 will be uploaded later today.
Click to expand...
Click to collapse
Awesome! Thank you, thank you!
I actually really like Oreo, just trying to get Oreo and WiFi calling working on my phone (My Office at work fights all day for 1 bar of cell signal), I had hoped that WiFi calling worked in the SM-G930U variant since everyone talked about it running so much better, but alas, it still doesn't support WiFi Calling (Stupid me for thinking it might have had support added recently).
Thank you again
(My Wife is sure to get upset with me once again working on my phone again today... whoops)
Thanks , G930AUCS8CRJ2 is working fine so far. Do you mind sharing how you go about 'converting' a set of ODIN files to a flashable adb zip? Do you just unextract every single archive in the .md5 files? and then zip it all up? And would rooting to G930AUCU4CRI2 brick my phone now that I am on CRJ2? My bad for all of the questions.
bnn0 said:
Thanks , G930AUCS8CRJ2 is working fine so far. Do you mind sharing how you go about 'converting' a set of ODIN files to a flashable adb zip? Do you just unextract every single archive in the .md5 files? and then zip it all up? And would rooting to G930AUCU4CRI2 brick my phone now that I am on CRJ2? My bad for all of the questions.
Click to expand...
Click to collapse
You mean about G930AUCS8CRJ2 sideload with adb? Im just pulling the update from AT&T servers and uploading it here. I don't know how to make sideload zip. And for the rooting part I don't know if its possible now because the bootloader binary was updated to 8, try to search here on xda and see if you can find root methods for this firmware
new update, check first post
----
I can ask you a question? please. My baseband is SMG930AUCU4CRE4 can i update to G930AUCS8CRK1? :/
Maury Yarik said:
I can ask you a question? please. My baseband is SMG930AUCU4CRE4 can i update to G930AUCS8CRK1? :/
Click to expand...
Click to collapse
First you need to install this:
https://forum.xda-developers.com/att-galaxy-s7/how-to/g930a-oreo-8-0-stock-att-odin-files-t3869871 (G930AUCS8CRJ2)
Then you need to go from G930AUCS8CRJ2 to G930AUCS8CRK1, G930AUCS8CRK1 to G930AUCS8CRL1 and you will have the latest update.
I actually have a S7 G930A. Rooted before, not rooted now.. Is there a way to do any of these updates without hooking up to a PC? I actually have no charge port functions and can only use wireless charger to charge the phone till i get the port fixed someday to do these features. I am on Android 8.0 oreo that i installed to sd card and updated from there like a year ago? Is that possible to do? Use SD card update.. Or. Would love to root the phone again, but cent seem to find a one click root app that will work with this phone..
Josh
Josh13400 said:
I actually have a S7 G930A. Rooted before, not rooted now.. Is there a way to do any of these updates without hooking up to a PC? I actually have no charge port functions and can only use wireless charger to charge the phone till i get the port fixed someday to do these features. I am on Android 8.0 oreo that i installed to sd card and updated from there like a year ago? Is that possible to do? Use SD card update.. Or. Would love to root the phone again, but cent seem to find a one click root app that will work with this phone..
Josh
Click to expand...
Click to collapse
Yes, you can update your phone without pc, just download the update you need from your phone, put the update in your sd card, go to recovery and select the option "Apply update from SD card"
stek-kravari said:
Yes, you can update your phone without pc, just download the update you need from your phone, put the update in your sd card, go to recovery and select the option "Apply update from SD card"
Click to expand...
Click to collapse
I was thinking something like that was possible. I have baseband version G930AUCU4CRB5 Android 8.0.0 on the AT&T Gal S7 as mentioned, I never saw any updates from this version to go up to a newer version or get into regular updates from OTA. 2 issues I would like to also fixed, that came with the manual update to 8.0 oreo on my phone was the HR heart rate sensor on the back by your flash(red LED) always goes off.. And have tried to go to Samsung health and do some settings to turn it off, but seems to show back up eventually. Also, the issue of not having a working LED indicator, works fine when the phone is POWERED off. and charges. But in OS, it won't work, screen off or on bc of the update. If anyone knows how those issues could be fixed and if there is a possible newer update from my baseband mentioned below. And thanks for the response.
HI, Help needed
Hi,
I wanted to check if it is possible to flash the latest Oreo firmware you have here for downloading dirrectly to my samsung s7 that is currently running on 7.0? Current BaseBand is G930AUCU4BQK2
Basically what happened was that i lost all my contacts on my phone, I ended up download Dr.Phone to my laptop, which i used to try and recover my numbers. What i didnt know was that dr.phone rooted my device which has caused me nothing but headaches.
I now want to flash my phone and get updated to oreo and have my phone working normally again. Since dr.phone did whatever it did to my phone I lost use of my finger print scanner, had to disable samsung health as it kept trying to open on its own, my phone is lagging and freezing constantly..
I just want my phone to be normal again and unrooted and updated.
Lastly my phone is an AT&T device, that i bought second hand in Dubai, if i flash stock firmware is it going to carrier lock my device to AT&T again?
Any advice and help with this matter would be greatly appreciated.

Which Rom is the best for the Mate 10 Pro

Hey Guys,
what do you think is the best costum rom (stable) for the Mate 10 pro?
Is it possible to flash it with Pie 9.0.161?
Thanks for Help :victory:
Just wait for the ota update to pie.
that's definitely a worse rom. i'm on it right now.
wooley4766 said:
Just wait for the ota update to pie.
Click to expand...
Click to collapse
I already have the Pie Update via Firmware Finder.
But i want to flash to a stable Pie Rom :fingers-crossed:
Pie Update
HauAbDuLauch said:
I already have the Pie Update via Firmware Finder.
But i want to flash to a stable Pie Rom :fingers-crossed:
Click to expand...
Click to collapse
If you have the Pie update from firmware finder it's an approved ROM unless you have a modified recovery it checks and you wouldn't be able to install it if it wasn't approved so you probably have the latest approved ROM
revjamescarver said:
If you have the Pie update from firmware finder it's an approved ROM unless you have a modified recovery it checks and you wouldn't be able to install it if it wasn't approved so you probably have the latest approved ROM
Click to expand...
Click to collapse
but no custom
Hi! Quick question. My BLA-L09 is on build number 8.0.0.131(c782). I'm rooted with Magisk via Pretoriano's TWRP using the all in one tool. I can't receive firmware updates because of this (they fail to install).
If I update to Pie, will I be able to root again with Magisk? How can make this update? I suppose I would need stock recovery back and don't know where to get it from it how to flash it. It was my first time doing this on a Huawei, I'm used to Samsung devices. Any help would be appreciated.
Thanks!
93starletgt said:
Hi! Quick question. My BLA-L09 is on build number 8.0.0.131(c782). I'm rooted with Magisk via Pretoriano's TWRP using the all in one tool. I can't receive firmware updates because of this (they fail to install).
If I update to Pie, will I be able to root again with Magisk? How can make this update? I suppose I would need stock recovery back and don't know where to get it from it how to flash it. It was my first time doing this on a Huawei, I'm used to Samsung devices. Any help would be appreciated.
Thanks!
Click to expand...
Click to collapse
Nope, you won't. Any version from 8.0.0.146 and above will contain the new bootloader which won't let you unlock it or install twrp, magisk or whatever, most probably you will brick your phone like I did.
You'll be a lot safer to stay on what you're on. Huawei did a nifty development to make life miserable to anyone which likes to customize their phone. Maybe they should be called Huapple from now on...
I was in a similar situation as you, 141 if I remember correctly. Installed Xposed via magisk, got a bootloop, did a system restore via erecovery, got it working again and lost magisk/root so thought it would be the time to do the ota, didn't know about the bootloader change so found I was on emui 9, tried to install twrp but that bricked the phone. So I tried to do the system restore via erecovery again, but that didn't work.
After that tried every possible way (inc. paying funkyhw etc.) to recovery the phone, no way. If you try to downgrade it to a version before 146 it will hardbrick leaving you with a paperweigth.
So if I were you, I wouldn't touch a thing. I gave up and am waiting for my Oneplus 6, much better phone for this stuff.
mirandam said:
Nope, you won't. Any version from 8.0.0.146 and above will contain the new bootloader which won't let you unlock it or install twrp, magisk or whatever, most probably you will brick your phone like I did.
You'll be a lot safer to stay on what you're on. Huawei did a nifty development to make life miserable to anyone which likes to customize their phone. Maybe they should be called Huapple from now on...
I was in a similar situation as you, 141 if I remember correctly. Installed Xposed via magisk, got a bootloop, did a system restore via erecovery, got it working again and lost magisk/root so thought it would be the time to do the ota, didn't know about the bootloader change so found I was on emui 9, tried to install twrp but that bricked the phone. So I tried to do the system restore via erecovery again, but that didn't work.
After that tried every possible way (inc. paying funkyhw etc.) to recovery the phone, no way. If you try to downgrade it to a version before 146 it will hardbrick leaving you with a paperweigth.
So if I were you, I wouldn't touch a thing. I gave up and am waiting for my Oneplus 6, much better phone for this stuff.
Click to expand...
Click to collapse
Thank you for the info! And what about staying on my current bootloader and flash a custom ROM on my already installed TWRP?
93starletgt said:
Thank you for the info! And what about staying on my current bootloader and flash a custom ROM on my already installed TWRP?
Click to expand...
Click to collapse
There is a ResurectionRemix rom that can be used for that. Just search for RR-O-v6.0.0-20180402-bkl-OpenKirin.zip it should work as this one's flashable by twrp. I haven't tried it so can't tell if it does. I have the file but I don't know if it's complete as it only contains system.img which seems strange as normally there would also be a boot.img or at least a kernel.img
mirandam said:
There is a ResurectionRemix rom that can be used for that. Just search for RR-O-v6.0.0-20180402-bkl-OpenKirin.zip it should work as this one's flashable by twrp. I haven't tried it so can't tell if it does. I have the file but I don't know if it's complete as it only contains system.img which seems strange as normally there would also be a boot.img or at least a kernel.img
Click to expand...
Click to collapse
Thanks! Last question. If I would like to go back to stock using the All In One Tool, how can I flash stock recovery? And where can I find it? Many thanks for your help.
are there custom roms for the huawei mate 10 pro??
cause cant find it on xda.
mine is stock it works but the no status bar pull down on lockscreen is anoying ;( sometimes and that only the stock sms app show on the always screen on...

Questions About Mate 10 and Android Pie

Before start i'd like to tell you about my adveture with my phone
I had a Huawei mate 10 ( ALP-L29 c185) installed 8.0.0.139, rooted with magisk and TWRP (By Pretoriano80) as recovery so yesterday i suddenly think that "i shuld try android 9" (i don't know why?) . I searched here and internet so finally i decided to update by "hurupdater" method. I downloaded stock firmware by "Firmware Finder for Huawei" app (9.0.0.177) and hurupdater 0.4 also twrp_bla_alp_0.7.img for twrp recovery. I put them in same folder on sdcard. Renamed recovery.img to keep recovery as twrp. Lastly i restarted recovery and installed hurupdater.zip.
DANG!!! My phone is bricked....... It gave a lot of errors during installation and when i try to reboot it was bootlooping, cant load recovery interface (twrp or stock). I could enter e-recovery but gives "getting package info failed" error. So ended up with bricked phone in my hands. I tried many ways including hisuite but nada....
Then i remembered "Funky Huawei", bought 1 credit and followed instructions. After long hellish hours (firmware downloading takes long) i have my phone back working with stock 8.0.0.140 rom, stock recovery even relocked bootloader also my whole data was intact. My curosity cost me 20 $ and hours. This morning i realised there is system update 9.0.0.159
So my questions o this point
1)What should i do now? Update to android pie (with stcock recovery of course)? Is it worth trying or just install twrp and root my current rom and go on my way for a while longer ? (till a more stable pie relase)
2) For the future, what was wrong in my update process. I'd never want to make same mistake again..
Thanks...
draqkin said:
Before start i'd like to tell you about my adveture with my phone
I had a Huawei mate 10 ( ALP-L29 c185) installed 8.0.0.139, rooted with magisk and TWRP (By Pretoriano80) as recovery so yesterday i suddenly think that "i shuld try android 9" (i don't know why?) . I searched here and internet so finally i decided to update by "hurupdater" method. I downloaded stock firmware by "Firmware Finder for Huawei" app (9.0.0.177) and hurupdater 0.4 also twrp_bla_alp_0.7.img for twrp recovery. I put them in same folder on sdcard. Renamed recovery.img to keep recovery as twrp. Lastly i restarted recovery and installed hurupdater.zip.
DANG!!! My phone is bricked....... It gave a lot of errors during installation and when i try to reboot it was bootlooping, cant load recovery interface (twrp or stock). I could enter e-recovery but gives "getting package info failed" error. So ended up with bricked phone in my hands. I tried many ways including hisuite but nada....
Then i remembered "Funky Huawei", bought 1 credit and followed instructions. After long hellish hours (firmware downloading takes long) i have my phone back working with stock 8.0.0.140 rom, stock recovery even relocked bootloader also my whole data was intact. My curosity cost me 20 $ and hours. This morning i realised there is system update 9.0.0.159
So my questions o this point
1)What should i do now? Update to android pie (with stcock recovery of course)? Is it worth trying or just install twrp and root my current rom and go on my way for a while longer ? (till a more stable pie relase)
2) For the future, what was wrong in my update process. I'd never want to make same mistake again..
Thanks...
Click to expand...
Click to collapse
I have exactly same phone (c185) never tried unlocking bootloader but I updated to emui 9 159 there are some buggy things like when you want to use third party lunchers You can't use gesture navigation and it has so many bugs so not using gesture is better
there are again some problems with third party launchers (im using nova) like sometimes when you go to "resents" its totally blank and you have to force stop "huawei home" to make it right
there are some good changes in camera like new 960 fps slow motion (but there is a huge crop in 240fps 720p and 960fps 720p I can't remember that 240fps had that crop or not) Turning off master ai and some new scene detection but it's slower than last one
there is a new performance mode that i love using it (it feels like a real flagship however it's not because of stupid SOC)
there is a new AI api that android 8 didn't have so most of apps wasn't able to use NPU
in emui 8 there is a little bit better battery
I love changes to my phone so I preferred buggy new firmware to old ones there are so many good little changes in interface (like when you take a picture you can go to gallery then scan it for QR code)
There is a way better Mira cast functionality (and new desktop mode in it)
hi touch, hi vision
These were all expensives I had with emui 9 that I can think of
How did you update @arianamirgholami ?
Meanwhile, I have the same phone but am still on Android Oreo......I have the ALP-L29 8.0.0.141(C185) model. I'm reading more and more about others with this model that have gotten the Android Pie upgrade over the last two months but the upgrade is still not available to me. Makes no sense...I have a stock rom on the phone, I am NOT rooted and my bootloader is locked. Neither hisuite, hicare, system update, nor firmware finder methods gets me anywhere. They all say that I'm on the most recent firmware.... 8.0.0.141(C185). Go figure....
curgervending said:
Meanwhile, I have the same phone but am still on Android Oreo......I have the ALP-L29 8.0.0.141(C185) model. I'm reading more and more about others with this model that have gotten the Android Pie upgrade over the last two months but the upgrade is still not available to me. Makes no sense...I have a stock rom on the phone, I am NOT rooted and my bootloader is locked. Neither hisuite, hicare, system update, nor firmware finder methods gets me anywhere. They all say that I'm on the most recent firmware.... 8.0.0.141(C185). Go figure....
Click to expand...
Click to collapse
Same here, although my brother and I have the same device (ALP-L29C185) and we're on the same career, he got the pie update like a month ago and nothing for me yet. I think it's a matter of time until our imeis turns.
MasterThiefGarrett said:
How did you update @arianamirgholami ?
Click to expand...
Click to collapse
I used Erecovery of firmware finder
curgervending said:
Meanwhile, I have the same phone but am still on Android Oreo......I have the ALP-L29 8.0.0.141(C185) model. I'm reading more and more about others with this model that have gotten the Android Pie upgrade over the last two months but the upgrade is still not available to me. Makes no sense...I have a stock rom on the phone, I am NOT rooted and my bootloader is locked. Neither hisuite, hicare, system update, nor firmware finder methods gets me anywhere. They all say that I'm on the most recent firmware.... 8.0.0.141(C185). Go figure....
Click to expand...
Click to collapse
Yes I saw many people on internet facing same issue, What I assume is that when you purchased the phone it came with 8.0.0.141, that's why its not getting the Pie. Because the phones which were using 8.0.0.140 already got the Pie instead of 8.0.0.141. So one thing you can try is to go back to 8.0.0.140 and then update the phone. I did the same, Installed 8.0.0.140 using HiSuite and then update to Pie.
Fazee99 said:
Yes I saw many people on internet facing same issue, What I assume is that when you purchased the phone it came with 8.0.0.141, that's why its not getting the Pie. Because the phones which were using 8.0.0.140 already got the Pie instead of 8.0.0.141. So one thing you can try is to go back to 8.0.0.140 and then update the phone. I did the same, Installed 8.0.0.140 using HiSuite and then update to Pie.
Click to expand...
Click to collapse
I finally got the OTA update from EMUI 8 to EMUI 9
curgervending said:
I finally got the OTA update from EMUI 8 to EMUI 9
Click to expand...
Click to collapse
Thats great. Means you got more luck. Mine is still on 9.0.0.159 and no update. Please also confirm one thing. What is android security patch in this version?
Finally grab the update today morning...
Another update today. Woww

Can't downgrade from EMUI 9

Hi everyone,
When EMUI 9 was first released on Firmware Finder, I've updated my phone with HuRupdate, since then, my phone model has changed from STF-L09C432 to
STF-LGRP2-OVS, since then, I'm stuck with the build 9.0.1.157, even though I've tried many time to flash another update or go back to EMUI 8 but I never managed to do it. I've tried with official recoveries, dload folder and it always failed, I've also tried flashing with TWRP, ADB, HWOTA or even MultiTool 8, but it never changed. Last time I tried flashing Kernel I've got an error saying that the file doesn't match the size or the path of the Partition. Have I done something wrong? Will I ever be Able to go back to EMUI 8? And If I ever manage to do it, Will I be able to receive official updates? I've seen that EMUI 9.1 was released as I saw a Honor 9 Lite with it and I want to upgrade to it as soon as possible
I'd be thankful if anyone can answer one of these questions!
I have Honor 9 STF-Al 10, with the System Emui 9.0.1.179
Due to some bugs, i intend to downgrade to Oreo.
it is said the phone will be hard brick by the method of HuRupdater.
the only way to downgrade to Oreo from Emui9 is Hisuite.
I heard about the HiSuite method, but when I go in the update menu it only tells me that i'm using the latest official version (which is wrong), and it doesn't show me any "switch to other version" button to downgrade the phone
Realiitysme said:
I heard about the HiSuite method, but when I go in the update menu it only tells me that i'm using the latest official version (which is wrong), and it doesn't show me any "switch to other version" button to downgrade the phone
Click to expand...
Click to collapse
should use the proper Hisuite version on PC (mine is 9.0.2.301)
there is an option to switch to Oreo
I'm using the same one, is it written somewhere which version is the right one or do I have to try and retry each version?
Realiitysme said:
I'm using the same one, is it written somewhere which version is the right one or do I have to try and retry each version?
Click to expand...
Click to collapse
you mean that your Hisuite is 9.0.2.301,
but still no option to switch to older Emui?
Exactly!
Not sure about If I should edit or double post but I thought that it also might be because my phone is Unlocked?
Wow I got exactly the same issue! Also STF-LGRP2-OVS but 162. No chance to downgrade!
I would be also fine with flashing a "normal" L09C432 version of EMUI but don't know how to..
Maybe if someone can post a TWRP Backup of EMUI 8.0 with no user data it could work since we can still have access to TWRP
Realiitysme said:
Maybe if someone can post a TWRP Backup of EMUI 8.0 with no user data it could work since we can still have access to TWRP
Click to expand...
Click to collapse
Firstly I'm gonna try to go back to a normal version, not this OVS crap. Maybe if you go to a normal STF-L09 Rom, Hisuite is offering you a rollback?
I don't even know how to do that to be honest. Shouldn't it be possible just with fastboot and a FF rom?
tesacrap said:
Firstly I'm gonna try to go back to a normal version, not this OVS crap. Maybe if you go to a normal STF-L09 Rom, Hisuite is offering you a rollback?
I don't even know how to do that to be honest. Shouldn't it be possible just with fastboot and a FF rom?
Click to expand...
Click to collapse
I've tried but didn't manage to do it, all I got was a bootloop but if you want to try it then go on, I've seen some EMUI 8 roms for STF-L09C432 here
Realiitysme said:
I've tried but didn't manage to do it, all I got was a bootloop but if you want to try it then go on, I've seen some EMUI 8 roms for STF-L09C432 here
Click to expand...
Click to collapse
You tried to flash the EMUI 8 rom directly, right? I would firstly flash a "regular" (no OVS) EMUI 9 Rom and then try to roll back with HiSuite. I'm probably gonna end up with flashing the regular EMUI 9, lock the Bootloader and sell that crappy phone to get a flashfriendly Xiaomi
tesacrap said:
You tried to flash the EMUI 8 rom directly, right? I would firstly flash a "regular" (no OVS) EMUI 9 Rom and then try to roll back with HiSuite. I'm probably gonna end up with flashing the regular EMUI 9, lock the Bootloader and sell that crappy phone to get a flashfriendly Xiaomi
Click to expand...
Click to collapse
Yup, you can still try to do it this way, if it works then tell me how you've done so I can do it
Careful
Realiitysme said:
Hi everyone,
When EMUI 9 was first released on Firmware Finder, I've updated my phone with HuRupdate, since then, my phone model has changed from STF-L09C432 to
STF-LGRP2-OVS, since then, I'm stuck with the build 9.0.1.157, even though I've tried many time to flash another update or go back to EMUI 8 but I never managed to do it. I've tried with official recoveries, dload folder and it always failed, I've also tried flashing with TWRP, ADB, HWOTA or even MultiTool 8, but it never changed. Last time I tried flashing Kernel I've got an error saying that the file doesn't match the size or the path of the Partition. Have I done something wrong? Will I ever be Able to go back to EMUI 8? And If I ever manage to do it, Will I be able to receive official updates? I've seen that EMUI 9.1 was released as I saw a Honor 9 Lite with it and I want to upgrade to it as soon as possible
I'd be thankful if anyone can answer one of these questions!
Click to expand...
Click to collapse
Be super careful downgrading to oreo because android P has rollback protection. I would recommend contacting HiCare and asking them to put you on EMUI 9.1. Although it's not a downgrade you might recieve and upgrade via OTA
Robert314 said:
Be super careful downgrading to oreo because android P has rollback protection. I would recommend contacting HiCare and asking them to put you on EMUI 9.1. Although it's not a downgrade you might recieve and upgrade via OTA
Click to expand...
Click to collapse
I was planning to roll back and the get the updates the official way but if I can have EMUI 9.1 and also have the official updates like that then it's okay too, but should I contact HiCare or Honor directly
It's been a while , I've contacted honor for my problem, they told me that they were going to send my request to a higher cell or something like that, it's been nearly one month and still no answer from them :/
Realiitysme said:
It's been a while , I've contacted honor for my problem, they told me that they were going to send my request to a higher cell or something like that, it's been nearly one month and still no answer from them :/
Click to expand...
Click to collapse
Try again with a correct dload package.
oslo83 said:
Try again with a correct dload package.
Click to expand...
Click to collapse
And how do I know if my dload package is correct?
Realiitysme said:
And how do I know if my dload package is correct?
Click to expand...
Click to collapse
use a dload meant for C432 with a build version superior of the one you actually are.
Try https://androidhost.ru/TTy
use a working SD or usb-otg ExFAT formated
(test for error with h2testw windows app or with f3 osx/linux)
use stock recovery
boot dload mode

Categories

Resources