[APP][XPOSED] Fake Goto Free - another fake GPS - Xposed Framework Modules

By using 'Fake GoTo' we can fake our location. Now we can fool our friends in social network to make them think that we are traveling around the world.
Main feature:
- Enable spoofing only in your selected application list.
- DPad controller, with this we can simulate walking to nearby places.
Use this application wisely, All consequences after using this application is your responsibility. If you are not agree to this statement, please do not install this application.
Requirements
Xposed framework installed
Usage
- Install Fake Goto Free
- Enable module on Xposed Installer + reboot
- Open Fake Goto, add target applications
- Select base location if you want (this location will be given to target apps)
- Force stop target app and relaunch it
- You can simulate walking and move around using D-Pad control
- You can minimize the control by single tap the red button, when minimized the red button could be moved for convenience
- When minimized, long press on the red button to save current location
Download
http://repo.xposed.info/module/net.arifhn.apel

Excited about this. Trying it now.
Sent from my MACHFIVE using Tapatalk

Working fine, great job!
Just some improvements is needed
1. The D-pad, too big and the app screen behind it react together when touch, so in a map app, when move the dpad the map turn together.
So should be able to avoid the mocked app to "react" while touching the road, and make the dpad able to collapse or minimize.
2. When choosing the map location in the module, if I search, for example, Central Park, it is not shown to me the map and I can't select the exactly location I want of it.
But great app anyway, thanks

Great app. Best part is you can select which app to spoof the location.
Making you can fake the location without affecting other apps like Google map

ivanparo said:
Working fine, great job!
Just some improvements is needed
1. The D-pad, too big and the app screen behind it react together when touch, so in a map app, when move the dpad the map turn together.
So should be able to avoid the mocked app to "react" while touching the road, and make the dpad able to collapse or minimize.
2. When choosing the map location in the module, if I search, for example, Central Park, it is not shown to me the map and I can't select the exactly location I want of it.
But great app anyway, thanks
Click to expand...
Click to collapse
Thank you for your input.
1. The D-Pad can be minimized by single tap on the red button, and when minimized the red button can be moved.
Yes I still research how to make the touch event not propagate to the target app screen. Not all apps react like this, need more time to fix it.
2. Next release will customize the location picker, maybe include new feature for saving favorite places.
ragnarok00 said:
Great app. Best part is you can select which app to spoof the location.
Making you can fake the location without affecting other apps like Google map
Click to expand...
Click to collapse
Thank you

suggestion, add save last location (how far you walked)

w/ the new poke'update, the app crashes if i have Fake GoTo enabled :crying:

LuisRuthes said:
suggestion, add save last location (how far you walked)
Click to expand...
Click to collapse
updated version 1.4 will have the feature
altpersona said:
w/ the new poke'update, the app crashes if i have Fake GoTo enabled :crying:
Click to expand...
Click to collapse
will check this later

arifhn said:
updated version 1.4 will have the feature
will check this later
Click to expand...
Click to collapse
for clarity, its the Poke app that FC / crashes, not the Goto app.

plz update plz
Only registered tell you thank you for this application and please update plz :crying:

Using your app since couple weeks, and it works great!

pokemon go 0.31.0 crash with fake goto free
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Same for me, application Pokemon Go crash on startup.
It's annoying because module was very useful.

I'm guessing spoofing location for system apps is not possible? I can't find system apps in the app picker

sd3993 said:
I'm guessing spoofing location for system apps is not possible? I can't find system apps in the app picker
Click to expand...
Click to collapse
Which system apps that you need to spoof?
Actually it may work, but.. I take an easy way to just block it, because there was a problem on passing preferences config through different apps.

Great app and by far my favorite. The only down side I've experienced is that the map (stops, pokemon, etc...) in Pokemon becomes unresponsive after a while when this is running. The rest of the menus, nearby monsters button, etc all work still but you can't click to move/rotate the map or engage monsters. This is on a rooted LGG2. Other than when that happens, the app is perfect. No "gps lost" errors or anything. Good job!

This is the best fake gps app that I used. Would you consider adding auto-walk function? So that we don't have to hold our fingers on the screen for a couple minutes to hatch eggs.

jackyhk02 said:
This is the best fake gps app that I used. Would you consider adding auto-walk function? So that we don't have to hold our fingers on the screen for a couple minutes to hatch eggs.
Click to expand...
Click to collapse
Thank you for using this application.
Auto walk is a good idea, let me think first and look for its possibility. :good:

From all fake GPS programs I tried, this seems to be the one that fakes better. I use the app gpsWifiPosDifference to see the differences between the apps. This is the only which works well with GPS precision and altitude. Most of the other GPS fixes the altitude to zero or to some weird values like 7!
altpersona said:
w/ the new poke'update, the app crashes if i have Fake GoTo enabled :crying:
Click to expand...
Click to collapse
Trying experimental version 1.5 the crashes stopped.

First, thank you for the great app! I really like it and had no issues since I started using it more than 6months ago...
Do you still develop or did you stop working on it?
Bug:
- Deleting Elements from the Favorite List sometimes messes up other elements in the list.
Feature Ideas:
- Maybe start the Map Selector already zoomed to the current location
- Maybe have "Save as Favorite" not checked by default
- Autowalk
- Joystick "Speed" Setting (limit max speed to customizable value: like 5km/h for walking or 22km/h for bicycle or 50km/h for car)
- Joystick Minimize (remember location of "dot" if moved e.g. to the corner)
-- EDIT: Actually, it works as long as I stay in the app. but e.g. Minimizing/ScreenOffOn reset it to show the controller in the center.
But as said these are ideas which might be nice to use but the app already works great as it is.
Thanks again, Regards
n00b

Related

[XPOSED] Xposed Pokemon - catch 'em all [17/07/2016][V1.8-Map Added]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Xposed Pokemon​
Xposed Pokemon module allows you to catch all the pokemons without going anywhere. The module allows you to fake location and allows you to go anywhere you want. The module provides navigation keys to navigate to any place.
Requirements
Root
Xposed Framework
Xposed Pokemon Module
How To
■ Enable Xposed Pokemon Module in Xposed Framework
■ Restart Device
■ Open the Xposed Pokemon application
■ set the start location in the map by touching the map. A marker will be shown in the map
■ Click "Start" in the list.
■ A small window with arrows will appear.
■ Open the Pokemon game and wait for it to load
■ The user will start at the selected location which we selected in the map
■ Using the arrow keys, you can move to that direction
Try it out and catch 'em all !!!
Video
FAQ
■ Why cant I see the popup window when clicking start button?
Go to app security-premissions-premissions-xposed Pokemon and tap display pop up window
■ Why joystick is getting closed always.
for now use module called App Settings as a workaround for the issue.
Simply enable settings for this module and check the option resident.
■ Why is the character moving in wrong direction?
the joystick works in north,east,south west directions irrespective of the character in the game. so you have to first align the character to face north by using the compass shown in the game.
Download
http://repo.xposed.info/module/com.vivek.xposedpokemon
Attached in this post also
Changelog
V1.8
Map feature added back again. No need to login to a fake account. Clicking on the map (little bit zoomed out) will set your position to that location and loads the pokemons near by.
V1.7
Bookmark feature added
When you are on the place, Click the bookmark icon in the joystick and give it a name and it will be saved.
Open xposed pokemon app and click favorites. Click on the favorite to set it as the current location
Long press the bookmark to delete it.
V1.6
Added compass based joystick feature (experimental). This feature works on phones with sensors only. Enable the compass view in pokemon go.
(click the compass icon in the game and make sure you are on the option where the character turns when the device is turned)
Then tick the compass checkbox in the application.
Then move the joystick to front and the character will move to the direction it is facing.
You can turn it off also.
Tried to fix the closing issue. Need testing.
Removed Pokemon Map feature as there are other websites available for that.
V1.5
Pokemon Map feature Added.
Create a fake pokemon trainer account and verify it with email. Open xposed module and click on fake login. enter your fake account details and click OK. then click on the map to set the start location. If everything is ok, the map will show pokemon locations.
If the servers are down it will show error message.
This is a one time setup. so after setting up the above details, the map will start loading pokemons when the user sets the start position in map.
V1.4
Minimize the window by using the Switch in the joystick.
For Huawei users, if your joystick is automatically closing, open Phone Manager application.take Power saving and click on Protected apps. inside that, switch on the Xposed Pokemon module.
V1.3
Search feature- Now you can search with full address and map will zoom to that location. then you can click to set it as start location.
Joystick close/disappear issue fix - need testers
V1.2
Walk Feature added (For hatching eggs)
Click the walk checkbox
Move the joystick to the direction you want the character to move and the character will start moving to that direction
To stop walking, uncheck the walk checkbox
V1.1
Joystick View added
Enable/Disable module checkbox added
Sprint speed added
V1.0
Initial version
Reserved
Ahhh.. Playing Poke Go already no fun if everyone using this mod...
But.. I want it.. Hehe
Sent from my SM-N910G using Tapatalk
Give food to the people!!great work!!!!
SM-N910F
Great idea!
Fantastic work @VivekKvivekkalady.. one suggestion .. if you add various walk speed it like running sprint or drive ..that would be great ..
Sent from my SM-G920F using XDA-Developers mobile app
jainsih said:
Fantastic work @VivekKvivekkalady.. one suggestion .. if you add various walk speed it like running sprint or drive ..that would be great ..
Sent from my SM-G920F using XDA-Developers mobile app
Click to expand...
Click to collapse
APK uploaded. Test and report guys.
vivekkalady said:
APK uploaded. Test and report guys.
Click to expand...
Click to collapse
Will report soon ..
vivekkalady said:
APK uploaded. Test and report guys.
Click to expand...
Click to collapse
Sent from my SM-G920F using XDA-Developers mobile app
Wow this looks cool. But let's hope this doesn't get us banned. There are some users who got a temporary ban when tried using some Fake GPS apps.
Hey vivek .. the servers are down but here are my suggestion..
First of all fantastic idea.kudos to that.. but there is alot to work on it..
1.add a search bar where we can type the location and fine it instead of manually scrolling and searching for any location.
2. The down direction button is not clickable..although the rest buttons are clickable..
3. It would be very convenient if you remake the direction buttons.. i am sorry but they look old school .. theres a ios repo you could consider heres the video..https://youtu.be/YIjqeBuEUGI
Best of luck !
Sent from my SM-G920F using XDA-Developers mobile app
Thx, but if i catch a pokemon, the app stops working. Something to do with this xposed? Anyone tried to catch one?
Also got an error here. Game freezes if you try and catch a Pokemon.
Using Xposed v85
as concern about moving works like a charm!!welldone my friend!i believe future evolving of app would me great!!!!
(is there a possibility for ingress too?)
NOTE 4 910F
Amazing job! One recommendation. Have the arrows pointing like a ps4 or Xbox controller d-pad. If that makes sense.
Everybody need this ?
thanks and amazing job, the arrow navigation is a bit hard to move. Maybe make a function "touch and go" means touch the area and go to that particular area been touched?
Subscribing to this thread for updates.
Bug: As soon as this is activated and before I have even set the spoofing it sets my gps to the centre of the earth. As in the centre of the equator and below Africa. This is a major issue as I can't have the module installed at the same time due to the fact it breaks the gps.
The game won't let me Log in to the Game when the Module is Active
Gesendet von meinem SM-G935F mit Tapatalk
Grafiqa said:
The game won't let me Log in to the Game when the Module is Active
Gesendet von meinem SM-G935F mit Tapatalk
Click to expand...
Click to collapse
DDOS is currently in effect. Gotta wait.

[APP][DEV] K-9 Mail for Wear OS (standalone)

Official K-9 Mail (or basically any other email clients) doesn't run on Wear OS because of missing WebView component. This modification of K-9 replaces WebView with TextView (among few other tweaks) that makes it usable on Wear OS (fetch messages, navigate folders, read & send mail).
There's Mail client from appfour but it requires phone companion app and doesn't work "standalone". Having an option to occasionally check emails from watch (with cellular module) is the primary reason for this modification (and leaving phone powered off or at home).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's still rough around the edges (some features may crash/not work or be hard to reach) but this is the first version and it allows me to read emails (tested with Gmail, was able to send email as well; on Huawei Watch 2). Newsletters obviously won't work as only the text part of emails is rendered.
Let me know what you think. I do not plan on any major UI rework but I can fix thing or two (if there are some fellow watch only users ).
TIP: Consider using "adb shell input text" for entering complex strings during account setup.
What is the .patch file for?
Thanks! How do you apply the patch and also how can I add more then one email account?
How do I install it?
I've just uploaded v2 which improves few things:
Extra padding at the bottom when reading email
Full screen keybord for entering email address
Easier pull to refresh
Hide unsupported search
Move (dangerous) delete action from bar to menu
kryzeK said:
What is the .patch file for?
Click to expand...
Click to collapse
It's just the actual changes made to the source code. https://en.wikipedia.org/wiki/Patch_(Unix)
jdogg4000 said:
Thanks! How do you apply the patch and also how can I add more then one email account?
Click to expand...
Click to collapse
Access this app Settings via the top right "More options" menu (not fully visible but reasonably well tappable) and look for "Add account".
NovaViper said:
How do I install it?
Click to expand...
Click to collapse
One has to use "adb" to push apk directly to the watch or using phone as proxy. Search for a friendly guide https://forum.xda-developers.com/an...-to-sideload-apks-android-wear-watch-t3726276
moneytoo said:
One has to use "adb" to push apk directly to the watch or using phone as proxy. Search for a friendly guide https://forum.xda-developers.com/an...-to-sideload-apks-android-wear-watch-t3726276
Click to expand...
Click to collapse
That got it all installed for me, thanks! :good:
moneytoo said:
Access this app Settings via the top right "More options" menu (not fully visible but reasonably well tappable) and look for "Add account".
Click to expand...
Click to collapse
Thank you, it would be great if those with crowns (scroll wheel) on the side of our watches could use it when reading an email. It currently works when looking at the inbox but not reading the email it self. Anyway to implement this?
Regardless thanks for taking the time to do this.
UPDATE: Actually whats weird is if I open a notification and read the email the crown works. If I go to an email through the app it does not. Oh well I can live with reading from tapping on the notification which is what I do most the time anyways.
Anyone know of a way to import k-9 mail settings to the watch?
I exported them from my phone and transferred it to my watch but when I hit import settings on the watch it says there is "no application can handle this process"
jdogg4000 said:
Thank you, it would be great if those with crowns (scroll wheel) on the side of our watches could use it when reading an email. It currently works when looking at the inbox but not reading the email it self. Anyway to implement this?.
Click to expand...
Click to collapse
Thanks for reporting that. My watch has no crown so I had no idea about that. I might take a look later when I have some time to spare and debug that.
jdogg4000 said:
Anyone know of a way to import k-9 mail settings to the watch?
I exported them from my phone and transferred it to my watch but when I hit import settings on the watch it says there is "no application can handle this process"
Click to expand...
Click to collapse
Now I know that Wear OS is also missing the component (chooser) for selecting/opening files. It should be possible to replace that with 3rd party library (something like https://github.com/spacecowboy/NoNonsense-FilePicker). IMHO this is a niche feature so I won't be fixing that any time soon.
moneytoo said:
I've just uploaded v2 which improves few things:
Extra padding at the bottom when reading email
Full screen keybord for entering email address
Easier pull to refresh
Hide unsupported search
Move (dangerous) delete action from bar to menu
Please excuse this naive question, but is this going to be offered in the PlayStore for loading on the OS or is sideloading it's only future?
Click to expand...
Click to collapse
sfortin said:
Please excuse this naive question, but is this going to be offered in the PlayStore for loading on the OS or is sideloading it's only future?
Click to expand...
Click to collapse
I thought about that but I still think that this app (and mainly its interface) is too much for people coming from Play Store (and expecting nice UI). Plus K-9 itself is still missing support for runtime permissions which means it's currently not publishable on the Play Store (without some work, though there are some pull requests on github).
Whoa!
I'm K-9's original creator, though I haven't been involved in the project in a while.
I just wanted to stop by to say that this is awesome. Nicely done.
-Jesse
obra said:
I'm K-9's original creator, though I haven't been involved in the project in a while.
I just wanted to stop by to say that this is awesome. Nicely done.
-Jesse
Click to expand...
Click to collapse
Great to hear directly from you, Jesse. K-9 running on Wear OS is mostly unchanged from its latest upstream, just few lines changes here and there (one patched library takes most of the patch - to fix placing of software keyboard). It wouldn't be possible without you and K-9 - thank you for that. :good:
moneytoo said:
I've just uploaded v2 which improves few things:
Extra padding at the bottom when reading email
Full screen keybord for entering email address
Easier pull to refresh
Hide unsupported search
Move (dangerous) delete action from bar to menu
It's just the actual changes made to the source code. https://en.wikipedia.org/wiki/Patch_(Unix)
Access this app Settings via the top right "More options" menu (not fully visible but reasonably well tappable) and look for "Add account".
One has to use "adb" to push apk directly to the watch or using phone as proxy. Search for a friendly guide https://forum.xda-developers.com/an...-to-sideload-apks-android-wear-watch-t3726276
Click to expand...
Click to collapse
where is the more options menu? all that is in the top right is the sync button.
The app is still running great on Samsung Watch 4 LTE.

[APP] Toggler: Toggle Tilt-to-wake and Always-on screen on Wear OS

Toggler is a Wear OS app to quickly change the state of "Tilt-to-wake" and "Always-on display". It uses accessibility for that (it reads screen of Settings app and simulates user input). The two toggles are accessible just as any other apps in launcher/drawer so they can be mapped to hardware button or put on watch face as complication.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What Toggler accomplishes is already be possible with AutoInput (which I never tried, I confess) but I believe that the single purpose of Toggler allows it to be fully event driven, efficient and faster. Plus it also should support all (up to 28) language variants of toggle texts. If you grant Toggler the "Display over other apps" permission, it will try to cover screen when it simulates input (it worked fine on emulator but was too slow to start on my real watch).
On first run, you will will be asked to enable Toggler in Accessibility settings
I tested Toggler only on emulator and single watch in single language so I desperately welcome your feedback to continue with this app.
The app icon looks like toggle which doesn't represent actual state of the toggle. I guess here things could improve a bit - to report state changes and possibly provide enhanced complication that actually reports current state.
Video of Toggler in action on Youtube.
UPDATE: v0.2 adds support for "Power off". To prevent accidental shutdown, the confirmation dialog ("Are you sure?") is kept open and needs to be confirmed by user.
UPDATE 2: Made it available on the Play Store.
Hi nice work! Could you add "toggle touchscreen lock"?
I have a small problem. If I use your button launcher I can find both shortcuts of your app, but when I try to use it with autowear or gesture launcher there is only one app called "toggler" that toggle the aos.
Regards
Hi, great! Could you please add this for 4G toggle?
Its very complicated to get to en-/disable 4g option (many submneues)
and to save battery this is a very usefull option
Hi, very good app. Thank you.
The app works perfectly on my LG G Watch R.
In combination with your other app "Button Launcher", it solves (partially) the missing setting of Wear Os to toggle easily the "Alway On Display" mode.
I say partially, as for instance, there is on my Amazfit GTS smartwatch (with its proprietatry simple OS) a very efficient setting allowing you to set the range time when the AOD is active or not. Perhaps could you improve your Toggler app by including this range time. Or create a new app, called for instance "Apps Launcher" which could launch an app (Toggler for instance) at specific times.
Hi is possible toggle Mobile data for esim users??
Hi. Love the app but as above I'd like to automate using tasker and autowear. Could you please supply the command line syntax to toggle the tilt function?
Hi is possible toggle Mobile data for esim users??
Is posible one new version that can be rotated clock 90,180 and 360º ?
Some chargers of watchs have horizontal position and and the sphere is rotated.
THANKS !.
Good job !.
Hello
@moneytoo Thank you for the nice solution. I wonder what are the action names for Tilt-to-wake and AOD activities? I'm looking for the way to automate it using Autowear Tasker plugin. Besides, is there a way to run these two activities at once?
Regards
apk version not compatible or source to compile myself available?
Hi.
Nice app. I used it with a fossil watch successfully.
Now I switched the phone's ROM to a custom ROM (the watch not changed) and can't install toggler neither from the play store nor the sold from this thread any more.
The play store tells that it's not compatible with my phone.
The new ROM of the phone is lineageos latest 17.1 (Android 10). As said, the watch itself is unchanged with the fossil stock ROM.
Any ideas where to get a compatible apk of toggler?
I'd also compile myself if the source sold be available somewhere.
moneytoo said:
Toggler is a Wear OS app to quickly change the state of "Tilt-to-wake" and "Always-on display". It uses accessibility for that (it reads screen of Settings app and simulates user input). The two toggles are accessible just as any other apps in launcher/drawer so they can be mapped to hardware button or put on watch face as complication.
View attachment 4700273 View attachment 4700274
What Toggler accomplishes is already be possible with AutoInput (which I never tried, I confess) but I believe that the single purpose of Toggler allows it to be fully event driven, efficient and faster. Plus it also should support all (up to 28) language variants of toggle texts. If you grant Toggler the "Display over other apps" permission, it will try to cover screen when it simulates input (it worked fine on emulator but was too slow to start on my real watch).
On first run, you will will be asked to enable Toggler in Accessibility settings
I tested Toggler only on emulator and single watch in single language so I desperately welcome your feedback to continue with this app.
The app icon looks like toggle which doesn't represent actual state of the toggle. I guess here things could improve a bit - to report state changes and possibly provide enhanced complication that actually reports current state.
Video of Toggler in action on Youtube.
UPDATE: v0.2 adds support for "Power off". To prevent accidental shutdown, the confirmation dialog ("Are you sure?") is kept open and needs to be confirmed by user.
UPDATE 2: Made it available on the Play Store.
Click to expand...
Click to collapse
I tried the toggler app, but on the ticwatch pro 3 it is broken. That is, the toggle for tilt doesn't work at all, and the always on toggle requires another tap and is not automatic. I think that it has not been optimized for the dpi of the ticwatch pro 3, and therefore the automation carried out by the App is not correct
SuperAnty97 said:
I tried the toggler app, but on the ticwatch pro 3 it is broken. That is, the toggle for tilt doesn't work at all, and the always on toggle requires another tap and is not automatic. I think that it has not been optimized for the dpi of the ticwatch pro 3, and therefore the automation carried out by the App is not correct
Click to expand...
Click to collapse
You're probably right, as far as I know it doesn't work on watches with newer WearOS

Remap the Google Assistant Button?

A separate dedicated button shouldnt be locked down for only Google Assistant.
Any way to remap it?
+1 Anyone?
I'd rather map this to Dialler which I'd use far more widely compared to any other app.
same here
ShaQ Blogs said:
+1 Anyone?
I'd rather map this to Dialler which I'd use far more widely compared to any other app.
Click to expand...
Click to collapse
Same here, did anyone fine any way ?
Not remappable yet. May be they'll change it via future updates.. highly unlikely imo.
So, here's the thing. I used an app called "Cometin" to try and remap the button. It didn't work (although, click and hold home button to summon assistant was successfully remapped) and when I got in toch with the developer, I was told,
"This appears to be difficult as the OS is calling google assistant directly."
If that's the case, I highly doubt it is possible to remap the button without root. I don't believe motorola will provide and update to allow remapping.
Disable Google Assistant Button
I hate this button. I wish manufacturers would stop shoving non customizable hardware bundled with unwanted software combo on to our devices. I guess this is the compromise that Motorola has made, in place of the usual plethora of software bloatware.
Is there a way to even disable this button? I read elsewhere that setting the 'default assistant app' to 'None', disables this button (instead of remapping it). Has anyone tried this?
ShubhamSinha said:
So, here's the thing. I used an app called "Cometin" to try and remap the button. It didn't work (although, click and hold home button to summon assistant was successfully remapped) and when I got in toch with the developer, I was told,
"This appears to be difficult as the OS is calling google assistant directly."
If that's the case, I highly doubt it is possible to remap the button without root. I don't believe motorola will provide and update to allow remapping.
Click to expand...
Click to collapse
i used this app and it seems to work for both button and home hold
SonuPanchal said:
i used this app and it seems to work for both button and home hold
Click to expand...
Click to collapse
Whoa, you mean you tried it on the one fusion+ and it worked? ? I guess I'll give it another go in that case
---------- Post added at 05:59 PM ---------- Previous post was at 05:49 PM ----------
Well, I tried it again, and it still isn't working for me for the dedicated button. Can you confirm which version of the app & device software version you're using?
I got the same issue.
I'm guessing I'll end up sending it to a repair shop to remove the button or, Jesus, just glue it unpressed.
Cyanoacrylate should work, I'll let you know if I decide to go for it.
Whoa! No need for that! So I'm rooted and first thing I did was uninstall Google Assistant which makes it so pressing the button doesn't do anything. Also, I found the file that controls what the button does. It's "/system/usr/keylayout/gpio-keys.kl" the only problem is the stupid kernel is write protected so I can't actually modify the file...
Honestly I really hate this extra button and since its ther I'd rather remap it as a firing button for wither pubg or cod. Just hope these morons give the option to remap in a future update
So yeah, I have a working solution without having to root your device.
All you need to do is to install Tasker, either buy it or rip it, I don't really care.
After that, follow some easy steps:
0. Create a task containing two steps: switching to home screen (you'll need that to prevent endless cycle of entering your fav application again and again when you swipe/press back) and then launching your fav app.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Then create a profile for Google app on the Profiles tab (not the Assistant app!) and assign your newly created task to it.
2. Save everything and enjoy.
The only little annoyances here are that you'll have to sacrifice the entire Google app in favor of another app, and also that annoying google beep at the launch.
Happy hacking, dudes and dudettes.
reactorcoremeltdown said:
So yeah, I have a working solution without having to root your device.
All you need to do is to install Tasker, either buy it or rip it, I don't really care.
After that, follow some easy steps:
0. Create a task containing two steps: switching to home screen (you'll need that to prevent endless cycle of entering your fav application again and again when you swipe/press back) and then launching your fav app.
View attachment 5378233
View attachment 5378235
1. Then create a profile for Google app on the Profiles tab (not the Assistant app!) and assign your newly created task to it.
View attachment 5378239
2. Save everything and enjoy.
The only little annoyances here are that you'll have to sacrifice the entire Google app in favor of another app, and also that annoying google beep at the launch.
Happy hacking, dudes and dudettes.
Click to expand...
Click to collapse
I just disabled google assistant in Google settings and then I disabled the Google app in phone's setting and now when I press google assistant dedicated button nothing happens ( GOD THANKS )
my phone is Motorola g 5g plus
I think my solution is much easier
Vicmanarg said:
I got the same issue.
I'm guessing I'll end up sending it to a repair shop to remove the button or, Jesus, just glue it unpressed.
Cyanoacrylate should work, I'll let you know if I decide to go for it.
Click to expand...
Click to collapse
reactorcoremeltdown said:
So yeah, I have a working solution without having to root your device.
All you need to do is to install Tasker, either buy it or rip it, I don't really care.
After that, follow some easy steps:
0. Create a task containing two steps: switching to home screen (you'll need that to prevent endless cycle of entering your fav application again and again when you swipe/press back) and then launching your fav app.
View attachment 5378233
View attachment 5378235
1. Then create a profile for Google app on the Profiles tab (not the Assistant app!) and assign your newly created task to it.
View attachment 5378239
2. Save everything and enjoy.
The only little annoyances here are that you'll have to sacrifice the entire Google app in favor of another app, and also that annoying google beep at the launch.
Happy hacking, dudes and dudettes.
Click to expand...
Click to collapse
I disabled google assistant in Google settings>assistant>general and also I disabled the Google app in phone's setting and now when I press google assistant dedicated button nothing happens ( GOD THANKS )
my phone is Motorola g 5g plus

[APP][XPOSED][8.1-12x] GPS Setter - Set Device Location

[XPOSED] GPS SETTER​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As most GPS spoof apps not working anymore coz some are old and some are not proper implement with the current OS so I made myself a GPS spoofer called GPS Setter it will help you set the location where you want from malicious apps coz some bad apps collect user location for advertisement purpose or another purpose.... who knows?? so in such case, this app will work like charm to prevent the current location. It's still in the beta stage coz it still has some bugs which will be fixed in upcoming updates.
Disclaimer:
The Author and Contributors of GPS Setter take no responsibility for any loss of data or damage to your device or any other consequences that arise as a result of using this application don't use this app for any illegal purpose or cheat any program so use it your own risk.
Compatibility:
This Module will Support Android 8.1+
Features:
-> Spoof location
-> No need to allow mock location
-> Detect Proof
-> Beautiful Material Design UI
REQUIREMENT
-> Rooted Device
-> Xposed Framework Installed (Lsposed or Edxposed)
Download:
Download from GitHub release
Source code
Support:
As you know this project does not have advertising anymore so it's hard to alive this project if you want to support further development of this project you can donate by BTC. This form of support is meant to compensate for my time dedicated to the community.
12eai5UkUtBe1gzNYvBvjTNTDvqVBFbQzy
Thanks:
All those who keep the project alive by supporting me via donations (you know who you are)
If somehow this module work for you then don't forget to hit a ⭐️ on GitHub​
Thank you, please add favorite location.
keis0n said:
Thank you, please add favorite location.
Click to expand...
Click to collapse
Yah i will add in next versions if get good response from users.
You could add subsystem activation in LSexposed as a recommendation. If the user does not tick any app, the Spoofer will say the module is not activated, even though it is.
vintotale said:
You could add subsystem activation in LSexposed as a recommendation. If the user does not tick any app, the Spoofer will say the module is not activated, even though it is.
Click to expand...
Click to collapse
you have any reference? I don't understand
AndroidX said:
you have any reference? I don't understand
Click to expand...
Click to collapse
Please see the screenshots, #3 being an exemple of subsystem shown as recommanded. Maybe the label of the message box when opening the spoofer could be more explicit (activate the module AND at least one application for exemple).
I tried it with https://play.google.com/store/apps/details?id=com.groundspeak.react.adventures and while it me "somewhere" that location is nowhere near the selected place. It seems to like the middle of Germany - which is nowhere near my real or fake location.
XlAfbk said:
I tried it with https://play.google.com/store/apps/details?id=com.groundspeak.react.adventures and while it me "somewhere" that location is nowhere near the selected place. It seems to like the middle of Germany - which is nowhere near my real or fake location.
View attachment 5634037
Click to expand...
Click to collapse
Have you try close target app? Or try different location
AndroidX said:
Have you try close target app?
Click to expand...
Click to collapse
Yes, it stays with a randomish location even after restarts
XlAfbk said:
Yes, it stays with a randomish location even after restarts
Click to expand...
Click to collapse
Have you try with different app? Like google map coz in my testing its working in all apps
AndroidX said:
Have you try with different app? Like google map coz in my testing its working in all apps
Click to expand...
Click to collapse
It happens with any app - but I now found a pattern: After reboot and setting the location once all is good, then I change the location several times and the set location starts to drift from the one received by apps. The fake location stays somewhere close to the location first set, even if I set the location to australia or something.
XlAfbk said:
It happens with any app - but I now found a pattern: After reboot and setting the location once all is good, then I change the location several times and the set location starts to drift from the one received by apps. The fake location stays somewhere close to the location first set, even if I set the location to australia or something.
View attachment 5634141
Click to expand...
Click to collapse
Strange I will fix it in next release .
This works on Tinder. Thing is I had to reboot the phone after setting the location. After turning off the spoofer the fake location was still set.
I disabled the module but then tinder was having trouble finding people nearby.
What solved it for me was clearing Tinder data + cache and then logging in again
Works fine for me! Enabled two apps in the module's scope, and the location set in the app is spoofed for just those two apps. Exactly what I wanted. Thanks @AndroidX!
works fine in android 12, in google maps is ok but in some apps its not working
AndroidX said:
Yah i will add in next versions if get good response from users.
Click to expand...
Click to collapse
Ho men you are awasome, I love your app, I hope in the next update you can add save favorit mark place and add a joystick for play some games
Thanks for all positive feedbacks.
Works for me like charm. Simple and effective, thanks. (Oneplus 9 pro, android 12, lsposed)
Excellent initiative. If you can, put a button to follow the real position directly. Also put a favorite and mark the APKs that can work with GPS Setter
So after getting positive feedbacks from users i am releasing new version of GPS Setter.
v1.1 New release
Redesign all code and rewrite in kotlin
Redesign UI and back to old skool
Added new Location hook method
Added play service location detection API hooked (Need system framework select)
Added system level hooking for inject spoof location into system
Added favourite location add feature
Added instant location hook no need to close target app
Fixed previous version bugs
Note:- If you want to hook location into system for bulletproof location spoof then you have to select "System framworks" inside lsposed along with target app.
Download :- here

Categories

Resources