I installed latest nightly update and now I enter my pattern, device unlocks and I see the android wallpaper only for a few seconds, then device locks again. I also noticed that any pattern I enter gets accepted even if it's different than the one I set before the update. Unfortunately I did not create a backup before doing this and now I'm stuck. Any solutions other than wiping and starting all over again?
Did you flash firmware file? If not do this first and reflash the rom
crckmc said:
Did you flash firmware file? If not do this first and reflash the rom
Click to expand...
Click to collapse
I updated using cm updater within android environment. If I reflash rom do I loose my data? I mean downloaded apps settings etc.. cause I really don't want to format...
if you do a drity flash over the current firmware you shouldn't loose them but I can't guarantee that it will work.
I would flash it like this:
Firmware -> CM -> gApps (links in CM13 thread)
if you have problems with battery stuck at 50% flash radon kernel test version to fix it.
crckmc said:
if you do a drity flash over the current firmware you shouldn't loose them but I can't guarantee that it will work.
I would flash it like this:
Firmware -> CM -> gApps (links in CM13 thread)
if you have problems with battery stuck at 50% flash radon kernel test version to fix it.
Click to expand...
Click to collapse
What do you mean by firmware file? The one that downloads through cm updater?
I don't know about updater i downloaded it manually from cyanogenmod-thread here:
http://forum.xda-developers.com/showpost.php?p=68023154&postcount=2
edit: this is only the firmware file
I downloaded the ROM here:
http://get.cm/?device=kenzo
crckmc said:
I don't know about updater i downloaded it manually from cyanogenmod-thread here:
http://forum.xda-developers.com/showpost.php?p=68023154&postcount=2
edit: this is only the firmware file
I downloaded the ROM here:
http://get.cm/?device=kenzo
Click to expand...
Click to collapse
Well, judging by the second link you provided, that's the zip that cm updater downloaded. I will flash files in the order you said and will update you.
jimakos98 said:
Well, judging by the second link you provided, that's the zip that cm updater downloaded. I will flash files in the order you said and will update you.
Click to expand...
Click to collapse
So I did what you said, but ended up formatting anyways. I installed the cm13 firmware then cm13 rom and gapps. Lastly I flashed radon kernel cause i had the battery bug. And now everything is working. Thanks.
delete /data/system/***.key files
Iyiren said:
delete /data/system/***.key files
Click to expand...
Click to collapse
Eveything is working great now, but I get random reboots. Do you know why? I am running radon kernel
jimakos98 said:
Eveything is working great now, but I get random reboots. Do you know why? I am running radon kernel
Click to expand...
Click to collapse
ha, i flashed latest AICP build, then got lock screen pattern error and random reboots, now flashed back to RR5.7.2. maybe rom some little issue
Iyiren said:
ha, i flashed latest AICP build, then got lock screen pattern error and random reboots, now flashed back to RR5.7.2. maybe rom some little issue
Click to expand...
Click to collapse
Hmm, I stick with this one for now, hoping for a nightly fix.
Related
Anything you could ever ask for to update your i777 in one place. Download link below...
ROM: cm-12.1-20151213-UNOFFICIAL-i777.zip
Features
Compiled with UBER toolchain (supposedly faster than standard toolchain)
Outgoing call bug fixed (hacked, whatever, it's not there anymore)
TRIM support (thanks to Lanchon)
Otherwise unchanged
CM is awesome.
GAPPS: tk_gapps-modular-pico-5.1.1-20150913-signed.zip
Features
Works.
MODEM: I777UCMD8_modem.zip
Features
Nobody knows, but it's the latest version that I'm aware of.
RECOVERY: SGH-S959G_TWRP_v2.7.1.0.zip
WARNING
This is for the S959G (which I think is identical in every way to the i777). It works on the S959G but I have not tested it on an i777.
XPOSED
So good. Works fine.
You need to install the .zip in recovery, and the .apk normally.
Uninstall .zip included.
Download
Installation instructions can be found on CM's website.
* If upgrading from CM12.1, wipe /data/dalvik-cache first (you probably don't even need to wipe /cache).
* If upgrading from any other ROM, you need to factory reset first (ie. wipe /cache and /data).
Good luck!
XDA:DevDB Information
CyanogenMod 12 [UNOFFICIAL] [UBER] for i777 + Call Bugfix + Goodies, ROM for the AT&T Samsung Galaxy S II SGH-I777
Contributors
dimoochka, Lysergic Acid, Lanchon, razer_kain, rogersb11, cyril279, other amazing devs...
ROM OS Version: 5.1.x Lollipop
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2015-09-26
Last Updated 2015-11-29
Directions?
Install Directions?
(Like the order and which ones we need to install, also clean flash or dirty?)
coolerboyj said:
Install Directions?
(Like the order and which ones we need to install, also clean flash or dirty?)
Click to expand...
Click to collapse
1. ROM
2. Kernel & GAPPS & Xposed -> All optional, order doesn't matter.
Modem can be flashed at any time and does not overlap with any of the above flashes.
Probably clean flash for most purposes unless you're coming from prior version of CM12.1
dimoochka said:
1. ROM
2. Kernel & GAPPS & Xposed -> All optional, order doesn't matter.
Modem can be flashed at any time and does not overlap with any of the above flashes.
Probably clean flash for most purposes unless you're coming from prior version of CM12.1
Click to expand...
Click to collapse
Couldn't get the phone to detect my sim card / get data connection. Tried flashing modem file, but verification failed with the new CM recovery . Any solutions?
s_spiff said:
Couldn't get the phone to detect my sim card / get data connection. Tried flashing modem file, but verification failed with the new CM recovery . Any solutions?
Click to expand...
Click to collapse
What device? I777? Also clean or dirty flash? I'll try to work on the modem issue sometime next week.
Clean install. Coming from cyanide Lollipop. Had TWRP when I flashed the kernel. I tried both flashing kernel first followed by the ROM as well as ROM followed by kernel. Both had the same issue.
s_spiff said:
Clean install. Coming from cyanide Lollipop. Had TWRP when I flashed the kernel. I tried both flashing kernel first followed by the ROM as well as ROM followed by kernel. Both had the same issue.
Click to expand...
Click to collapse
I built a fully updated version (20151104) last night (see first post for download link). You no longer need to install Lanchon's kernel (TRIM support is built in).
I am installing this ROM on my own device (S959G) right now and testing it out.
Instructions:
1) Optional, if you want to try to flash the modem: install the version of TWRP you had initially, and try to flash the modem through that.
2) Install ROM.
3) Install GAPPS
4) Install XPOSED (if you want - make sure to re-download as the version is updated from v74 to v75).
OK. its been a while since i flashed a lollipop rom. so here i go. im currently running shostock3 v4.0 on my i777. if i flash a kitkat compatible recovery
( CWM-KitKatCompatible-i777.zip), i can flash this rom right? i'd do a full wipe, data,cache,system then flash rom>gapps>xposed....i should be good? right?
mmystere68 said:
OK. its been a while since i flashed a lollipop rom. so here i go. im currently running shostock3 v4.0 on my i777. if i flash a kitkat compatible recovery
( CWM-KitKatCompatible-i777.zip), i can flash this rom right? i'd do a full wipe, data,cache,system then flash rom>gapps>xposed....i should be good? right?
Click to expand...
Click to collapse
That's right. Not 100% sure about the recovery (I've never used that one), but I think you would be in good shape. Make a backup onto your computer first so that you have a contingency plan in case you soft brick.
If you're flashing on the i777, then I believe this ROM will replace your recovery with the stock CM12 recovery (just FYI - should be inconsequential).
dimoochka said:
That's right. Not 100% sure about the recovery (I've never used that one), but I think you would be in good shape. Make a backup onto your computer first so that you have a contingency plan in case you soft brick.
If you're flashing on the i777, then I believe this ROM will replace your recovery with the stock CM12 recovery (just FYI - should be inconsequential).
Click to expand...
Click to collapse
Haha...i always do a backup before flashing a rom...just made one in reserve. Download just finished...gonna try it out right now and test it. will post feedback later on...
UPDATE: flashed and booted up nicely.....but once i rebooted the phone, it stuck on samsung galaxy s2 logo with yellow triangle....
Update 2: i think xposed module messed up the system....did a data wipe and it boots up fine now.....need to setup everything all over again...hope i dont get that prob again....
mmystere68 said:
Haha...i always do a backup before flashing a rom...just made one in reserve. Download just finished...gonna try it out right now and test it. will post feedback later on...
UPDATE: flashed and booted up nicely.....but once i rebooted the phone, it stuck on samsung galaxy s2 logo with yellow triangle....
Update 2: i think xposed module messed up the system....did a data wipe and it boots up fine now.....need to setup everything all over again...hope i dont get that prob again....
Click to expand...
Click to collapse
Yeah I installed an older version of xposed (v74) in the past and it caused a bootloop. Using v75 with this nightly has been pretty stable for me.
New nightly uploaded to link in op.
dimoochka said:
New nightly uploaded to link in op.
Click to expand...
Click to collapse
I installed this new version in my s2 i777 but it failed
pepe100 said:
I installed this new version in my s2 i777 but it failed
Click to expand...
Click to collapse
What was the problem? I dirty flashed on mine from the prior version and it's been working fine. Maybe try clean flash?
dimoochka said:
What was the problem? I dirty flashed on mine from the prior version and it's been working fine. Maybe try clean flash?
Click to expand...
Click to collapse
It stuck in the cm screen I did a full wipe. I am going to try the next released when available. Thanks for develop for our device.
pepe100 said:
It stuck in the cm screen I did a full wipe. I am going to try the next released when available. Thanks for develop for our device.
Click to expand...
Click to collapse
New build and xposed uploaded. I installed it on my S959G last night and it works fine.
dimoochka said:
New build and xposed uploaded. I installed it on my S959G last night and it works fine.
Click to expand...
Click to collapse
Thanks bro
pepe100 said:
Thanks bro
Click to expand...
Click to collapse
New build uploaded (working fine on my S959G).
I'm stuck on the CM logo. Worse, I thought this came with TWRP. It comes with the CM recovery. I made a back up with TWRP and moved it to my computer prior to flashing. The CM recovery is worthless. Not sure where to start getting back to my old Rom (Omni 4.4.4).
Edit: Good to go and back on 4.4.4. I was hoping to move forward with this version. Not sure what happened. I used Odin to install the Siyah kernel with CWM and then was able to flash a Kernel with twrp to restore my back up.
I'm wondering if I had flashed a Kernel with TWRP at the beginning if it would have made a difference. I may try that now since I'll be looking at the triangle screen from now on anyway.
I do recommend that it be clear in the OP that the stock Kernel contains CM recovery and not TWRP.
Madcat8686 said:
I'm stuck on the CM logo. Worse, I thought this came with TWRP. It comes with the CM recovery. I made a back up with TWRP and moved it to my computer prior to flashing. The CM recovery is worthless. Not sure where to start getting back to my old Rom (Omni 4.4.4).
Edit: Good to go and back on 4.4.4. I was hoping to move forward with this version. Not sure what happened. I used Odin to install the Siyah kernel with CWM and then was able to flash a Kernel with twrp to restore my back up.
I'm wondering if I had flashed a Kernel with TWRP at the beginning if it would have made a difference. I may try that now since I'll be looking at the triangle screen from now on anyway.
I do recommend that it be clear in the OP that the stock Kernel contains CM recovery and not TWRP.
Click to expand...
Click to collapse
The bootloop is weird - did you inadvertently install an old version of Xposed (happened to me once)? Wipe data/cache/system and reflash - should do the trick.
I'll try to build a TWRP'ed version, shouldn't be too hard...
HI i am new to this thread and I have some serious issue with gapps for cm12.1 OK to my problem...
I successfully flashed cm12.1 nightly latest ver. and have downloaded gapps(arm,5.1,nano) I am using twrp recovery flashed my ROM and gapps successfully and after rebooting I get many errors com.gapps , play services and many more errors like that but whenever I flash my ROM without installing gapps it works fine(with no play sgoogle play services etc) plz help me I am in serious trouble... My phone is s4 non lte plz help
Sounds like you might be trying to use Open Gapps. The Official CM12.1 thread for your phone suggested the TK Gapps found here: http://forum.xda-developers.com/android/software/tk-gapps-t3116347 - Either mini or micro. They are a bit out dated, but they should work and you can just update once everything is set up.
Not working
Sorry friend it dosent work for me as i had already tried tk gapps and open gapps and pa today but i don know what the problem is just flashed the rom properly 12.1 cm nightly latest its not my first time though..
thx
maybe some one could seriously help me
Could be the recovery you are using. Are you wiping /system partition when reflashing CM + Gapps? You might also look into one of the optimized builds of CM, such as GearCM as well.
yes I am wiping dalvik and everything before flashing the gapps and rom and also I had seen many vids on YouTube regarding cm12.1 on s4 i9500 and downloaded from the YouTube link provided and follow the same procedure as they do but unfortunately I messed up don't know why.....
oh and one thing can you tell me is there any harm if I flash my phone multiple times... any storage disk issues.. like slowing and any ram issues??
i hope this help you:
download the latest cm12.1 for s4
and flash latest twrp recovery for this device
now go to google and search for "open gapps"
and select the open gapps project then
select "arm" and "5.1" and "pico" and download it
then go to device recovery and advanced wipe to system, cache, data and dalvik
and flash the cm first then flash the opengapps good luck
ASSAYYED said:
i hope this help you:
download the latest cm12.1 for s4
and flash latest twrp recovery for this device
now go to google and search for "open gapps"
and select the open gapps project then
select "arm" and "5.1" and "pico" and download it
then go to device recovery and advanced wipe to system, cache, data and dalvik
and flash the cm first then flash the opengapps good luck
Click to expand...
Click to collapse
ok ill try thx much but any harm flashing rom multiple times disk speed issues ram like?
xxxanmol said:
ok ill try thx much but any harm flashing rom multiple times disk speed issues ram like?
Click to expand...
Click to collapse
Don't worry flashing roms is very simple process it is only remove files and copy new files
if you flash a new rom even more than 1000 time your device will not be bricked
good luck
ASSAYYED said:
Don't worry flashing roms is very simple process it is only remove files and copy new files
if you flash a new rom even more than 1000 time your device will not be bricked
good luck
Click to expand...
Click to collapse
oh thx man but any slowing down disk issues?
xxxanmol said:
oh thx man but any slowing down disk issues?
Click to expand...
Click to collapse
As i said installing rom for android device doesn't effect on the device performance
and the never cause any slowing for disks except if the rom you installed was too bad this is another problem
however, don't worry if your device bricked or any else just power it off and boot to download mode then
flash the latest lolllipop 5.0 stock tar.md5 rom and every thing will be ok!
remember DON'T WORRY
ASSAYYED said:
As i said installing rom for android device doesn't effect on the device performance
and the never cause any slowing for disks except if the rom you installed was too bad this is another problem
however, don't worry if your device bricked or any else just power it off and boot to download mode then
flash the latest lolllipop 5.0 stock tar.md5 rom and every thing will be ok!
remember DON'T WORRY
Click to expand...
Click to collapse
thx buddy hope your suggestions will help me in future:good:
xxxanmol said:
thx buddy hope your suggestions will help me in future:good:
Click to expand...
Click to collapse
YOU WELCOME!!!!!!!
I had found the issue by my own it was that my twrp recovery was outdated and I just flashed it with new with flashify from play store to 2.8.0 and everything worked for me...:laugh:
xxxanmol said:
I had found the issue by my own it was that my twrp recovery was outdated and I just flashed it with new with flashify from play store to 2.8.0 and everything worked for me...:laugh:
Click to expand...
Click to collapse
I mentioned a possible recovery issue in post #4. Glad you resolved it though.
Hai.
I have a galaxy note 3 sm n9005. Have already rooted by finding forum from xda and even install twrp recovery following the guides given.
But im trying to install custom rom. And tried all the roms tat is given from xda for note 3 and could install single one.
Please help to resolve this problem. Im confuse.
Tq.
Not enough details.
It's probably the version of recovery you're using.
Which version of TWRP and what errors are you receiving?
es0tericcha0s said:
Not enough details.
It's probably the version of recovery you're using.
Which version of TWRP and what errors are you receiving?
Click to expand...
Click to collapse
Im using twrp 3.0.2.1 and everytime i try to install a rom it stuck at samsung screen.
And it show md5 not found.
What roms have you tried? What firmware were you on before you started flashing? Sometimes newer roms need the newest firmware like the bootloader and modem to run correctly. Are you wiping system, data, and both caches? If you are going from a Touchwiz rom to, say, a CM based, it might also be necessary to wipe the internal storage. Of course you should back all that up to a PC first, if you do that.
es0tericcha0s said:
What roms have you tried? What firmware were you on before you started flashing? Sometimes newer roms need the newest firmware like the bootloader and modem to run correctly. Are you wiping system, data, and both caches? If you are going from a Touchwiz rom to, say, a CM based, it might also be necessary to wipe the internal storage. Of course you should back all that up to a PC first, if you do that.
Click to expand...
Click to collapse
Resurrection remix.unicorn.slim.and all cynogen rom is working. Im trying install s7edge custom rom for darkwolf and darklord. I even updated the bootloader and modem according to tutorial. I used odin to flash them..
N9005xxugboa1
Lrx21v.n9005xxugbob6
I have my stock rom n internl backed up. I try all. And still it always stuck on samsung screen.
Are you installing the kernel after the rom flash? A lot of newer Samsung roms don't have the kernel built in like CM roms.
es0tericcha0s said:
Are you installing the kernel after the rom flash? A lot of newer Samsung roms don't have the kernel built in like CM roms.
Click to expand...
Click to collapse
How can install kernel after. Everytime i install it reboots its self to samsung screen. Or should go back to recovery and install the kernel back. And thank you for your help till now.
That's definitely why it's not booting, if you didn't do the kernel. If the rom has the Aroma installer, typically the last question asks if you want to reboot now and has a check mark in by default. Just uncheck and it'll go back to recovery. But you can also just go back and flash now and should be good.
es0tericcha0s said:
That's definitely why it's not booting, if you didn't do the kernel. If the rom has the Aroma installer, typically the last question asks if you want to reboot now and has a check mark in by default. Just uncheck and it'll go back to recovery. But you can also just go back and flash now and should be good.
Click to expand...
Click to collapse
I have uncheck the reboot after install. When i install the rom it automatically reboot itself. It doesnt show anything or show done. Once it even show os not found.
Hi
Where can i install or find the latest kernel
It's in the installation instructions for the rom.
es0tericcha0s said:
It's in the installation instructions for the rom.
Click to expand...
Click to collapse
Hi.
I have found the bootloader and modem for my sm n9005 from the installation instruction for the rom.
I try to flash according to the tutorial.and my baseband didnt change. I try flash using odin 3times.
Im not sure where i did wrong.can u help me
Tq
Remove the battery for 10 seconds. Put it back in and reboot to download mode. Uncheck auto reboot. Flash then check auto reboot and flash again. Should stick.
tq
es0tericcha0s said:
Remove the battery for 10 seconds. Put it back in and reboot to download mode. Uncheck auto reboot. Flash then check auto reboot and flash again. Should stick.
Click to expand...
Click to collapse
Tq
Will try and let you know
sitijohn85 said:
Tq
Will try and let you know
Click to expand...
Click to collapse
Hi
I tried as said and it didnt chnge.
Can i ask bootloader should be at bl and modem should be at cp. Is it correct.
Hi
Thank you for your help.
I did the change on bootloader and modem.
Now im i need to know two more thing.
I download 2 dffernt kind of bootloader n modem.
I flash blxxxxxbpb1 and cpxxxxxboj1..this 2 files were tar.md5 files
Another one which i didnt flash. Blxxxxxxbpb1 and cpxxxxxxxbpb2..this 2 files are tar.tar files..
Can i know whats the different with this 2 files.
One more thing is when i chnge the bootloader and modem will the kernel changes. Or is it different.
Please guide me..im confuse.
Someone might have just mislabeled them. Flashing those will not affect kernel. Different partition of the phone.
Hi
I did change the bootloader n modem.
And even change the kernel as told in the forum. It was note5 port kernel.7.1.0..
After trying to install the darkwolf rom.it was still the same..it did not work.
Please help me
sitijohn85 said:
Hi
I did change the bootloader n modem.
And even change the kernel as told in the forum. It was note5 port kernel.7.1.0..
After trying to install the darkwolf rom.it was still the same..it did not work.
Please help me
Click to expand...
Click to collapse
This is the recommended kernel
https://www.androidfilehost.com/?fid=24572369242687310
Recommended recovery is TWRP 2.8.7.0 not the newer 3.0+
Flash other recovery. Boot to TWRP. Wipe system, data, cache, dalvik. Flash rom. Wipe caches. Flash kernel. Reboot. Should work according to lots of people on the thread for that rom.
Hi.
How flash kernel.
just flash the tar.md5 file or the tar.zip file
PROBLEM SOLVED, THANK YOU !
Hi.
I just recently rooted my Honor 5X (KIW-UL00 , it's the chinese model)
I then tried installing a custom ROM, the LineageOS. Problem being that I was stuck in a weird BootLoot. When I rebooted the system, it showed me the usual Honor page for like 4-5 seconds, then the loading screen for LineageOS. After like 10 seconds, the animation stopped, the thing crashed and my phone restarted to the Honor page, then Lineage, then crash ... So I booted my phone with TWRP, tried Wiping the Cache and System and started over again with installing Lineage. The same thing happened. I then tried with 3 other custom ROM'S and the same thing happened. I don't know what I did wrong, I am wiping my cache and Dalvic each time, but I can't figure out what to do.
I'm looking for someone who could help me fix this. I am thinking about flashing the stock ROM, I just don't know how to do it, because it seems different than the custom ROM'S
PS: I'm looking for a kick fix, because I kinda really need my phone xD
Thank you!
Ok so, quick update, I got rid of TWRP by flashing the stock recovery over it. I tried to follow this:
https://forum.xda-developers.com/honor-5x/help/honor-5x-kiw-ul00-boot-loop-t3449554
(DigiGoon's first answer) but it told me that the installation failed.
So in short, my phone is actually in a endless bootloob, trying to boot no ROM, because the're none.
what's the stock system version you were running before you flashed the custom rom? B418 is the latest non VoLTE firmware.
It was Marshmallow 6.0.1... I found my mistake
We can't downgrade using the SD card method and I was trying to install 5.0
Now I need to find the stock version for the KIW-UL00 6.0.1
you can downgrade with the help of hisuite by huawei.
if your stock system was above B422, you can use this patch to stop the bootloop,
just flash the file in twrp after you flash the rom. https://mega.nz/#!tK51gDRL!S9oYLBTeFDbN0hOCzt5jQ5DYECObFC08YMr-Kml6scc
Problem is that I dont have any ROM or custom recovery running on my phone. I can only acess the bootloader, the eRecovery (that for some magical reasons, doesn't work for me) and the SD card installer, that also doesnt work because the only thing I can find is a UPDATE.APP that is on 5.0, when my phone was on 6.0.1, which doesn't work.
HiSuite doesn't even connect and I don't know what VolTE is, can you explain?
Can someone can help me in finding the Stock ROM for KIW-UL00 (the chinese version of Honor 5x) on android 6.0.1. I can find those for every country except china...
EDIT, I was able to get back on TWRP, so I can add files in my phone
haubudam, i freaking love you dude, you saved me
Thank you SOOOOOOO much
haubudam said:
you can downgrade with the help of hisuite by huawei.
if your stock system was above B422, you can use this patch to stop the bootloop,
just flash the file in twrp after you flash the rom. https://mega.nz/#!tK51gDRL!S9oYLBTeFDbN0hOCzt5jQ5DYECObFC08YMr-Kml6scc
Click to expand...
Click to collapse
Thanks man. I was also stuck up in the same problem for a day and flashing BaPatch.zip solved the issue.
Uvneshkumar said:
Thanks man. I was also stuck up in the same problem for a day and flashing BaPatch.zip solved the issue.
Click to expand...
Click to collapse
Can u send me the screenshot of files in zip?
gopinaidu77 said:
Can u send me the screenshot of files in zip?
Click to expand...
Click to collapse
https://mega.nz/#!tK51gDRL!S9oYLBTeFDbN0hOCzt5jQ5DYECObFC08YMr-Kml6scc
Uvneshkumar said:
https://mega.nz/#!tK51gDRL!S9oYLBTeFDbN0hOCzt5jQ5DYECObFC08YMr-Kml6scc
Click to expand...
Click to collapse
Thank you
haubudam said:
you can downgrade with the help of hisuite by huawei.
if your stock system was above B422, you can use this patch to stop the bootloop,
just flash the file in twrp after you flash the rom.
Click to expand...
Click to collapse
My version of the firmware is B245. Your patch did not help me, there is no newer version of firmware for KISH-UL00 than 245. What should I do?
Sodomit666 said:
My version of the firmware is B245. Your patch did not help me, there is no newer version of firmware for KISH-UL00 than 245. What should I do?
Click to expand...
Click to collapse
It was necessary to update the stock firmware to the latest version and then flash custom.
I have RN4 SD with RR Nougat and ElectraBlue kernel. How can I reinstall stock kernel? And what is the latest android version of stock kernel for mido?
nikkky said:
I have RN4 SD with RR Nougat and ElectraBlue kernel. How can I reinstall stock kernel? And what is the latest android version of stock kernel for mido?
Click to expand...
Click to collapse
Reflash whatever ROM you are using to go back to stock kernel.
And how can I go back to stock ROM?
nikkky said:
And how can I go back to stock ROM?
Click to expand...
Click to collapse
If you wanna return to stock ROM including stock recovery etc. use MiFlash to flash stock fastboot image, guide = http://en.miui.com/thread-565784-1-1.html
It's really easy, just follow from point B).
I'm on RR nougat with fanvo kernel and redwolf recovery, i want to revert back to stock miui rom(only rom, i would like to keep redwolf), can you guy's show me the step? I try to flash stock rom 9.5.9 global in redwolf but failed. TIA
w4y4n said:
I'm on RR nougat with fanvo kernel and redwolf recovery, i want to revert back to stock miui rom(only rom, i would like to keep redwolf), can you guy's show me the step? I try to flash stock rom 9.5.9 global in redwolf but failed. TIA
Click to expand...
Click to collapse
Follow guide above (dont relock bootloader) and then just flash Redwolf.
Thank you sir, i'm aware about fastboot method, but i just don't have pc right now to flash, maybe there is other way to revert back without pc, by recovery method maybe? Btw, thank for your reply sir :good:
w4y4n said:
Thank you sir, i'm aware about fastboot method, but i just don't have pc right now to flash, maybe there is other way to revert back without pc, by recovery method maybe? Btw, thank for your reply sir :good:
Click to expand...
Click to collapse
Im pretty sure you can just download stock ROM from http://en.miui.com/download.html (down ATM for some reason) and flash it normally, also dont forget to flash lazyflasher since you are going back to stock. (Redwolf might be taking care of it, not sure)
I allready try it sir, it failed. Failed when flashing system in recovery (not finish flashing stock rom), phone suddenly reboot and stuck on logo. Force to reboot to recovery, can't mount system, but after reboot recovery everything back to normal, and flash RR again so i can use my phone :laugh:
Btw, i try to flash miui 9.5.9.0 NCFMIFA, sorry for my english
w4y4n said:
I allready try it sir, it failed. Failed when flashing system in recovery (not finish flashing stock rom), phone suddenly reboot and stuck on logo. Force to reboot to recovery, can't mount system, but after reboot recovery everything back to normal, and flash RR again so i can use my phone :laugh:
Btw, i try to flash miui 9.5.9.0 NCFMIFA, sorry for my english
Click to expand...
Click to collapse
Maybe you tried to flash fastboot ROM? Link filename you tried to flash.
Due download page shutdown, here is recovery file that i allready try to flash, miui_HMNote4XGlobal_V9.5.9.0.NCFMIFA_b57067babe_7.0
Sorry can't refer the link sir, just the file name :laugh:
w4y4n said:
Due download page shutdown, here is recovery file that i allready try to flash, miui_HMNote4XGlobal_V9.5.9.0.NCFMIFA_b57067babe_7.0
Sorry can't refer the link sir, just the file name :laugh:
Click to expand...
Click to collapse
You are kidding right? This is not even full ROM, this seems like incremental update package (only 45.1MB) that's why you cant flash it.
Just wait till http://en.miui.com/download.html is working and download latest stable or developer ROM and flash it.
Edit:
Here is link to stable 9.5.10.0 http://bigota.d.miui.com/V9.5.10.0.NCFMIFA/miui_HMNote4XGlobal_V9.5.10.0.NCFMIFA_2300218819_7.0.zip
Or developer 8.2.1 http://bigota.d.miui.com/8.2.1/miui_HMNote4XGlobal_8.2.1_7fda810f8d_7.0.zip
It full rom sir, about 1,3gb in size. Thank you sir, i'll try developer rom later
k3lcior said:
You are kidding right? This is not even full ROM, this seems like incremental update package (only 45.1MB) that's why you cant flash it.
Just wait till http://en.miui.com/download.html is working and download latest stable or developer ROM and flash it.
Edit:
Here is link to stable 9.5.10.0 http://bigota.d.miui.com/V9.5.10.0.NCFMIFA/miui_HMNote4XGlobal_V9.5.10.0.NCFMIFA_2300218819_7.0.zip
Or developer 8.2.1 http://bigota.d.miui.com/8.2.1/miui_HMNote4XGlobal_8.2.1_7fda810f8d_7.0.zip
Click to expand...
Click to collapse
Flashing the stock rom using OrangeFox recovery works? I'm on Lineage OS by Zeelog
Mido is a really cool device. I was using MiracleDROID from the beginning. Best ROM ever made (just my opinion). But it is not supported anymore. Thanks to Hikari no Tenshi and Lakku.
I can't call some telephone numbers anymore. No clue, why. I would like to "reset" the phone.
FW: org. stable ROM then following attached guide.
Is that a good idea? Any help or experience is appreciated.