Hi!
Today i shut down my device because i wanted to do a backup. But now my phone is not turning on anymore and i am also not comming in the recovery menu.
I am on the International 15s version i think and i didnt change anything, besides installing the adb drivers today.
There is no LED, and the phone is also dead if i plug it into the charger / to a pc. It is like in this video: https://youtu.be/x_h7phOFalc
Is there anything i can do?
Thank you!
Same Problem
I have Same Problem... I put the plug in the phone and Wall... Nothing... No LED No Boot.... I send it back to the Shop and I weit
I remember during the times when I had 1s that the guys were putting them on charge with the wall charger for 12 hours and then the led would come to life. Try that.
Of course that was an mtk chipset, but it might work for you as well.
Okay, i already left it on the charger for > 6 hours but no signs of life so far
Hi Guys,
You probably already tried that, but hold the "Power" button for at least 12 or 15 seconds.
I had the same problem : my phone went down after battery was depleted. I hook it up for 30 minutes... and thought it won't wake up.
But pressing the "Power" button really long helped...
Regards.
Kampfgans said:
Hi!
Today i shut down my device because i wanted to do a backup. But now my phone is not turning on anymore and i am also not comming in the recovery menu.
I am on the International 15s version i think and i didnt change anything, besides installing the adb drivers today.
There is no LED, and the phone is also dead if i plug it into the charger / to a pc. It is like in this video: https://youtu.be/x_h7phOFalc
Is there anything i can do?
Thank you!
Click to expand...
Click to collapse
Did you try plugging it in a different wall power socket? Also try using different wire and charging adapter. Try charging it from your PC's USB 3 port as (USB 3 port has slightly high power)
sanke1 said:
Did you try plugging it in a different wall power socket? Also try using different wire and charging adapter. Try charging it from your PC's USB 3 port as (USB 3 port has slightly high power)
Click to expand...
Click to collapse
Hi,
Yes i plugged it into 3 different sockets with 2 different chargers and 2 different cables, also via usb 3 and usb 2. No signs of life.
The only thing that happens is: When i connect it to the pc, it sometimes makes this "bing" for a connected usb device. The Windows Device Manager Shows me a "QUSB_BULK". But i cannt communicate to the phone via fastboot...
Any other ideas ?
Kampfgans said:
Hi,
Yes i plugged it into 3 different sockets with 2 different chargers and 2 different cables, also via usb 3 and usb 2. No signs of life.
The only thing that happens is: When i connect it to the pc, it sometimes makes this "bing" for a connected usb device. The Windows Device Manager Shows me a "QUSB_BULK". But i cannt communicate to the phone via fastboot...
Any other ideas ?
Click to expand...
Click to collapse
You tried to backup in recovery?
RISHI RAJ said:
You tried to backup in recovery?
Click to expand...
Click to collapse
What do you mean with recovery?
The display is always black, im not comming into recovery mode
Your device seems to be in Qualcomm Recovery mode.
Does it boot into fastboot mode?
Keep ( Power and Vol Down ) button combo pressed till you get the fastboot screen with chinese characters.
If you get that screen, then you can flash TeamSpain recovery, then perform factory reset and sideload any CM13 based rom.
If you do not get any of that, then I am afraid that you have to visit nearest LE Eco Service center to re-flash the factory firmware.
sanke1 said:
Your device seems to be in Qualcomm Recovery mode.
Does it boot into fastboot mode?
Keep ( Power and Vol Down ) button combo pressed till you get the fastboot screen with chinese characters.
If you get that screen, then you can flash TeamSpain recovery, then perform factory reset and sideload any CM13 based rom.
If you do not get any of that, then I am afraid that you have to visit nearest LE Eco Service center to re-flash the factory firmware.
Click to expand...
Click to collapse
No, unfortunately i dont get into the fastboot screen...
Kampfgans said:
What do you mean with recovery?
The display is always black, im not comming into recovery mode
Click to expand...
Click to collapse
I mean why did you switched it off to backup?You had custom recovery installed?
RISHI RAJ said:
I mean why did you switched it off to backup?You had custom recovery installed?
Click to expand...
Click to collapse
No, i had nothing installed.
I wanted to Backup it, but as i switched it of, the phone was just dead
Kampfgans said:
No, i had nothing installed.
I wanted to Backup it, but as i switched it of, the phone was just dead
Click to expand...
Click to collapse
I suspect your usb port could be broken and your phone is out of juice, so there is no way of bringing it back to life without the usb port. If you trust your DIY skills, you can watch a tear down video and hopefully see if all is well inside.
King Krued said:
I suspect your usb port could be broken and your phone is out of juice, so there is no way of bringing it back to life without the usb port. If you trust your DIY skills, you can watch a tear down video and hopefully see if all is well inside.
Click to expand...
Click to collapse
Hmm the battery had over 80% as this happend... I dont want to loose my warranty if i open it
Maybe there is no other way than sending it back to china
Then you should give it to Le Eco service center.
Did u find out what the problem was? Same thing happened to mine! It started with screen being unresponsive in the lower parts of the phone, then when I powered it off to see if that would help, it just wouldn't power on anymore. No sign of life! Wtf is happening
---------- Post added at 02:25 PM ---------- Previous post was at 02:24 PM ----------
If you don't mind me asking, where did u get it from?
Mavrik666 said:
Did u find out what the problem was? Same thing happened to mine! It started with screen being unresponsive in the lower parts of the phone, then when I powered it off to see if that would help, it just wouldn't power on anymore. No sign of life! Wtf is happening
---------- Post added at 02:25 PM ---------- Previous post was at 02:24 PM ----------
If you don't mind me asking, where did u get it from?
Click to expand...
Click to collapse
Did you try rooting or flashing custom recovery?
RISHI RAJ said:
Did you try rooting or flashing custom recovery?
Click to expand...
Click to collapse
Never tinkered with any of that. Plugging it into PC does nothing either. seems completely dead.
Mavrik666 said:
Never tinkered with any of that. Plugging it into PC does nothing either. seems completely dead.
Click to expand...
Click to collapse
Im very much scared now.Guess Ive made a mistake by trusting on This Chinese brand.Please Contact Letv company & ask the reason behind it & update here.If its related to motherboard like in LG G4
---------- Post added at 06:22 PM ---------- Previous post was at 05:51 PM ----------
Which Model you both had?
Related
Can someone help please i think ive bricked my sero 7 pro...i followed http://forum.xda-developers.com/show....php?t=2297246 post 2 to the t it seemed to root fine then i booted into recovery and it just said recovery and i couldnt get any further then it restarted and now its tsuck on the hisense logo for 45mins wont do anything if i hold volume up and power it says fastboot and nothing else if down and power it says recovery and nothing else tried the recovery mentioned in the other page nothing just stays on hisense logo
Me too?
jjsero7 said:
Can someone help please i think ive bricked my sero 7 pro...i followed http://forum.xda-developers.com/show....php?t=2297246 post 2 to the t it seemed to root fine then i booted into recovery and it just said recovery and i couldnt get any further then it restarted and now its tsuck on the hisense logo for 45mins wont do anything if i hold volume up and power it says fastboot and nothing else if down and power it says recovery and nothing else tried the recovery mentioned in the other page nothing just stays on hisense logo
Click to expand...
Click to collapse
I bought mine last week (UK version M470BSE not A) this is the 32GB version... Basically I managed to root it just fine but noticed that I couldn't get into CWM recovery? Would just stay on the 'Recovery' title screen. So after much reading on the thread I noticed that someone had the same problem and their solution was to put the tablet into 'Fastboot' mode and run the 'XERecovery.exe' but now my tablet is bricked I can tell you I'm not happy at all as I'll most probably have to destroy it in order to return it for a refund.
What was the outcome of your problem, did xboxexpert reply with an answer? Or did he just give you the following steps:
"First off, no I did not. It is definitely not bricked you can not brick this tablet thanks to my scripts.
Step 1: Remove all USB Cables and Hold Volume up and Power from a off state, you will see FASTBOOT on the tablet screen. Let go of power once you see FASTBOOT!
Step 2: Provided you have a USB cable and a PC you can plug it in now and run the recovery.exe from within the folder where my root script is located.
Step 3: By the time you read this if you followed the instructions XERecovery.exe told you to do you should have access to CWM Recovery go install a ROM."
If so that's bullsh*t! As without proper tools such as 'odin' like whats used for samsung flash recovery, we are SCREWED!!! I don't think Hisense are supporting this device like their competitors do in terms of technical resources etc.. Please let me know either way!
Cheers
itfreek said:
I bought mine last week (UK version M470BSE not A) this is the 32GB version... Basically I managed to root it just fine but noticed that I couldn't get into CWM recovery? Would just stay on the 'Recovery' title screen. So after much reading on the thread I noticed that someone had the same problem and their solution was to put the tablet into 'Fastboot' mode and run the 'XERecovery.exe' but now my tablet is bricked I can tell you I'm not happy at all as I'll most probably have to destroy it in order to return it for a refund.
What was the outcome of your problem, did xboxexpert reply with an answer? Or did he just give you the following steps:
"First off, no I did not. It is definitely not bricked you can not brick this tablet thanks to my scripts.
Step 1: Remove all USB Cables and Hold Volume up and Power from a off state, you will see FASTBOOT on the tablet screen. Let go of power once you see FASTBOOT!
Step 2: Provided you have a USB cable and a PC you can plug it in now and run the recovery.exe from within the folder where my root script is located.
Step 3: By the time you read this if you followed the instructions XERecovery.exe told you to do you should have access to CWM Recovery go install a ROM."
If so that's bullsh*t! As without proper tools such as 'odin' like whats used for samsung flash recovery, we are SCREWED!!! I don't think Hisense are supporting this device like their competitors do in terms of technical resources etc.. Please let me know either way!
Cheers
Click to expand...
Click to collapse
I just got my UK one aswell (32GB) and went through the same path, no CWN and recovery has screwed it for me too, any ideas. Its not even 2 hours old
Got fastboot access, does anyone have a UK sero image I can try or any other advise on how to recover my device ??? Anyone ????
Sorted
Just to let you know, that I got my UK 32GB unbricked.
Had to purchase another one (extreme I know !!!), got xboxexpert to dial in, grab an image of the new one and then fastboot into the bricked one and reflash it
All working now. Head over to his thread for the image files
Well pleased !!!!
Hisense Sero 7 Pro
Alpinestar777 said:
Just to let you know, that I got my UK 32GB unbricked.
Had to purchase another one (extreme I know !!!), got xboxexpert to dial in, grab an image of the new one and then fastboot into the bricked one and reflash it
All working now. Head over to his thread for the image files
Well pleased !!!!
Click to expand...
Click to collapse
Hi there,
My Sero 7 Pro is also having this same issue. But also in addition to this, it will not charge properly.
It hangs on the Hisense screen for a long time whilst connected via usb.
When I try to restart into update mode (up+down+power) it just states battery is too low.
I cannot get into fastboot neither as battery is too low?!
I was able to get into recovery before but since the battery has died, i cannot recharge it and do anything?!
Any ideas would be much appreciated!
It will charge
megabite said:
Hi there,
My Sero 7 Pro is also having this same issue. But also in addition to this, it will not charge properly.
It hangs on the Hisense screen for a long time whilst connected via usb.
When I try to restart into update mode (up+down+power) it just states battery is too low.
I cannot get into fastboot neither as battery is too low?!
I was able to get into recovery before but since the battery has died, i cannot recharge it and do anything?!
Any ideas would be much appreciated!
Click to expand...
Click to collapse
Megabite
I had exactly the samething. Plugged into mains for the entire day did not give me enough charge for fastboot !!!! Was abit of a nightmare but plug it into your pc as the charge is slower and leave there for a 30mins + Try to switch it off (hold power button) when it starts to charge. Did that as the mains was just not holding its charge.
It will charge you just need to keep it off. You just need a little bit of juice to get into recovery (fastboot) and then it will charge.
Alpinestar777 said:
Megabite
I had exactly the samething. Plugged into mains for the entire day did not give me enough charge for fastboot !!!! Was abit of a nightmare but plug it into your pc as the charge is slower and leave there for a 30mins + Try to switch it off (hold power button) when it starts to charge. Did that as the mains was just not holding its charge.
It will charge you just need to keep it off. You just need a little bit of juice to get into recovery (fastboot) and then it will charge.
Click to expand...
Click to collapse
Thanks! I will try this.
You wouldnt happen to have an image I can then reflash it with as my recovery was actually worked until the battery died.
Thanks again
---------- Post added at 11:21 PM ---------- Previous post was at 10:25 PM ----------
Alpinestar777 said:
Megabite
I had exactly the samething. Plugged into mains for the entire day did not give me enough charge for fastboot !!!! Was abit of a nightmare but plug it into your pc as the charge is slower and leave there for a 30mins + Try to switch it off (hold power button) when it starts to charge. Did that as the mains was just not holding its charge.
It will charge you just need to keep it off. You just need a little bit of juice to get into recovery (fastboot) and then it will charge.
Click to expand...
Click to collapse
Thanks for the advice, that worked!
Ok so I can fastboot and get into recovery now.
Only problem is that because I flashed a US rom without a backup of my previous UK 32gb rom and I am a bit stuck.
Could anybody help at all with a backup image or any other advice.
Thanks
megabite said:
Thanks! I will try this.
You wouldnt happen to have an image I can then reflash it with as my recovery was actually worked until the battery died.
Thanks again
---------- Post added at 11:21 PM ---------- Previous post was at 10:25 PM ----------
Thanks for the advice, that worked!
Ok so I can fastboot and get into recovery now.
Only problem is that because I flashed a US rom without a backup of my previous UK 32gb rom and I am a bit stuck.
Could anybody help at all with a backup image or any other advice.
Thanks
Click to expand...
Click to collapse
Its all in this link
http://forum.xda-developers.com/showthread.php?t=2297246
Alpinestar777 said:
Its all in this link
http://forum.xda-developers.com/showthread.php?t=2297246
Click to expand...
Click to collapse
I've also wiped the system etc so need a UK rom. There are only boot and kernel on the first post.
Thanks for your help though
Sent from my GT-I9300 using Tapatalk 2
uk rom
megabite said:
I've also wiped the system etc so need a UK rom. There are only boot and kernel on the first post.
Thanks for your help though
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Hi,
there is a UK rom on this page:
http://forum.xda-developers.com/showpost.php?p=41875861&postcount=2
Martin
Alpinestar777 said:
Just to let you know, that I got my UK 32GB unbricked.
Had to purchase another one (extreme I know !!!), got xboxexpert to dial in, grab an image of the new one and then fastboot into the bricked one and reflash it
All working now. Head over to his thread for the image files
Well pleased !!!!
Click to expand...
Click to collapse
Hi I got my Sero 7 pro bricked. I have CWM running. I can go to the recovery and able to install any ROM I want, however my tablet shows Hisense and then gets stuck for ever. I am not sure what I can do.
Also Windows can recoganize the device as MTP USB Device, with a yellow sign. The updating of driver doesn't seem to work. So I cannot see my device when I type "adb devices".
Thanks for all the help.
It's not meant to charge via USB. Plug it into an ac adaptor.
Sent from my M470BSA using xda app-developers app
My tablet is charged but is stuck after it displays Hisense Smart. It keeps on displaying forever. I tried other ROM also, but same results. Any ideas what I can do.
Thanks.
i am facing same problem now
megabite said:
Hi there,
My Sero 7 Pro is also having this same issue. But also in addition to this, it will not charge properly.
It hangs on the Hisense screen for a long time whilst connected via usb.
When I try to restart into update mode (up+down+power) it just states battery is too low.
I cannot get into fastboot neither as battery is too low?!
I was able to get into recovery before but since the battery has died, i cannot recharge it and do anything?!
Any ideas would be much appreciated!
Click to expand...
Click to collapse
when i try to on my hisense sero pro7 after 5/ hour charging it also shows red signal.
dogood1 said:
Hi I got my Sero 7 pro bricked. I have CWM running. I can go to the recovery and able to install any ROM I want, however my tablet shows Hisense and then gets stuck for ever. I am not sure what I can do.
Also Windows can recoganize the device as MTP USB Device, with a yellow sign. The updating of driver doesn't seem to work. So I cannot see my device when I type "adb devices".
Thanks for all the help.
Click to expand...
Click to collapse
whether did you find a solution?
I'm desperate and I have the same problem: (
people help us: (
darmonus said:
whether did you find a solution?
I'm desperate and I have the same problem: (
people help us: (
Click to expand...
Click to collapse
Are you using windows XP. Try these links for help.
http://forum.xda-developers.com/showthread.php?t=2130399
also make sure you have this driver installed.
Microsoft_User-Mode_Driver_Framework_Install-v1.0-WinXP
dogood1 said:
Are you using windows XP. Try these links for help.
http://forum.xda-developers.com/showthread.php?t=2130399
also make sure you have this driver installed.
Microsoft_User-Mode_Driver_Framework_Install-v1.0-WinXP
Click to expand...
Click to collapse
I use windows 7 but I do not know how I can Install oryginal rom .
My tablet is bricked . I can use just FASTBOOT.
darmonus said:
I use windows 7 but I do not know how I can Install oryginal rom .
My tablet is bricked . I can use just FASTBOOT.
Click to expand...
Click to collapse
You should be able to install the original rom via fastboot.
I'm assuming that you are at the point where "fastboot devices" shows devices...
You can start off by installing the stock recovery: http://forum.xda-developers.com/attachment.php?attachmentid=2000996&d=1369834980
fastboot flash --RECOVERY stock_boot.img --no-reboot
Then you can grab the stock ROM from the second post in xboxexpert's thread:
http://forum.xda-developers.com/showthread.php?t=2297246
fastboot flash zip [whateverStockRomyougrabbed.zip]
Reboot into recovery and do a factory reset.
I hope that helps. It certainly can't break things worse.
just bricked my tablet. its starting in recovery and thats it
Hi guys,
I'm have a GT-P7510 that won't power up. usually when the battery died i just had to press power button for 10 -15 sec and it boot up. But now, nothing. except when plug in a computer
the tab was shown as apx device in device manager.
i installed the apx driver and it is now shown as NVIDIA USB Boot-recovery driver for Mobile devices
I search for a fix but i didn't find any yet.
You guys have any fix for me?
thank you
Gariep said:
Hi guys,
I'm have a GT-P7510 that won't power up. usually when the battery died i just had to press power button for 10 -15 sec and it boot up. But now, nothing. except when plug in a computer
the tab was shown as apx device in device manager.
i installed the apx driver and it is now shown as NVIDIA USB Boot-recovery driver for Mobile devices
I search for a fix but i didn't find any yet.
You guys have any fix for me?
thank you
Click to expand...
Click to collapse
Can you get to download mode...and hit us with more info....ROM....kernel.....recovery......rooted........?
Gil81 said:
Can you get to download mode...and hit us with more info....ROM....kernel.....recovery......rooted........?
Click to expand...
Click to collapse
Hi,
Thank you for your reply.
I'm a noob with these... i didn't rooted it and i did not mod anything.
I will need your help to get the info you want.
i didn't know how to get to download mode so i search a bit. from what i saw i have to hold volume- (wich is left i think) and power button at the same time?
I get nothing on screen.
Just windows sound that recognize a new hardware plug in usb port.
PS: buy the way if you have any suggestion about any update or mod i should do, let me know.
Thank you!
Gariep said:
Hi,
Thank you for your reply.
I'm a noob with these... i didn't rooted it and i did not mod anything.
I will need your help to get the info you want.
i didn't know how to get to download mode so i search a bit. from what i saw i have to hlod volume- (wich is left i think) and power button at the same time?
I get nothing on screen.
Just windows sound that recognize a new hardware plug in usb port.
PS: buy the way if you have any suggestion about any update or mod i should do, let me know.
Thank you!
Click to expand...
Click to collapse
If you're not rooted you might want to take it in to be looked at.. If you don't want to do that..We can Odin a one-click onto it and get you back up.. From there you could root or put a custom ROM of you're liking on it.. But first if I was you I would drain the power all the way off it..( tape the power button down or use rubber bands ) for a few days.. Then plug it in..if the charging animation comes up then..let it charge..when it gets above 60 or so percent..you can try toturn it on.. If that doesn't work and you don't want to go the Odin route hit me back and we can try a factory reset.. I'll walk you through it.. Let me now you're decision...
Gil81 said:
If you're not rooted you might want to take it in to be looked at.. If you don't want to do that..We can Odin a one-click onto it and get you back up.. From there you could root or put a custom ROM of you're liking on it.. But first if I was you I would drain the power all the way off it..( tape the power button down or use rubber bands ) for a few days.. Then plug it in..if the charging animation comes up then..let it charge..when it gets above 60 or so percent..you can try toturn it on.. If that doesn't work and you don't want to go the Odin route hit me back and we can try a factory reset.. I'll walk you through it.. Let me now you're decision...
Click to expand...
Click to collapse
i already tried to drain the power...
I will try what you suggest me.
i saw that there was a guide for rooting with 4.0.4 rom.
should i use this guide? i'm i better with another rom?
Thank you!
Gariep said:
I will try what you suggest me.
i saw that there was a guide for rooting with 4.0.4 rom.
should i use this guide? i'm i better with another rom?
Thank you!
Click to expand...
Click to collapse
Let's just try to get it back up..before we go flashing firmware.. Do you know for sure what tablet version it is...
Gil81 said:
Let's just try to get it back up..before we go flashing firmware.. Do you know for sure what tablet version it is...
Click to expand...
Click to collapse
i will get back later... i have to go to work.
The only thing i'm sure about is that it's a GT-P7510
Is the version write on the back of the tab?
I don't have the tab with me right now.
Will check later.
Thank you!
Gariep said:
i will get back later... i have to go to work.
The only thing i'm sure about is that it's a GT-P7510
Is the version write on the back of the tab?
I don't have the tab with me right now.
Will check later.
Thank you!
Click to expand...
Click to collapse
If it is the gt-p7510...then it is the WiFi only version..if this is correct I will hunt up the zip files we need to get you back up...they are kinda spread out...I have most of them though..ttyl
Gil81 said:
If it is the gt-p7510...then it is the WiFi only version..if this is correct I will hunt up the zip files we need to get you back up...they are kinda spread out...I have most of them though..ttyl
Click to expand...
Click to collapse
Yes it is the wifi version only
Gariep said:
Hi,
Thank you for your reply.
I'm a noob with these... i didn't rooted it and i did not mod anything.
I will need your help to get the info you want.
i didn't know how to get to download mode so i search a bit. from what i saw i have to hold volume- (wich is left i think) and power button at the same time?
I get nothing on screen.
Just windows sound that recognize a new hardware plug in usb port.
PS: buy the way if you have any suggestion about any update or mod i should do, let me know.
Thank you!
Click to expand...
Click to collapse
Did you have usb plugged in when you tried to enter download mode?
If so, try without usb.
tys0n said:
Did you have usb plugged in when you tried to enter download mode?
If so, try without usb.
Click to expand...
Click to collapse
thank for your answer.
i tried both with usb plugged and unplugged
Gariep said:
thank for your answer.
i tried both with usb plugged and unplugged
Click to expand...
Click to collapse
OK..I'm back home... .. So you have the device unplugged.. Then hold down the power button and volume down button( closest to power button ) at the same time...( hold for a min ).. If it starts showing the Samsung animation keep holding until a screen comes up with a box like object on the left and an android on the right..I think its an android on the right..Might be something else,but there will be just two things ( choices on the screen )...If you get this far.. I'll walk you through a factory reset..Or we might just wipe cache first and see if it boots.. Then a factory reset..
Gil81 said:
OK..I'm back home... .. So you have the device unplugged.. Then hold down the power button and volume down button( closest to power button ) at the same time...( hold for a min ).. If it starts showing the Samsung animation keep holding until a screen comes up with a box like object on the left and an android on the right..I think its an android on the right..Might be something else,but there will be just two things ( choices on the screen )...If you get this far.. I'll walk you through a factory reset..Or we might just wipe cache first and see if it boots.. Then a factory reset..
Click to expand...
Click to collapse
I tried to hold it for 2 minutes but nothing...
Gariep said:
I tried to hold it for 2 minutes but nothing...
Click to expand...
Click to collapse
Put it on the wall charger and see if the charging animation comes up....if it does...let it charge.. I think we can get it into recovery or download mode if not recovery....if we get to recovery... You will probably have to do a factory reset,but I want you to tell me what options you have in recovery.. been a while since I seen stock recovery..can't remember ..We'll proceed from there..if the charging animation doesn't come up..let it charge anyway... I need to see where it stands so I can help you proceed correctly.......Just looked at stock recovery..we will have to do a factory reset...
@Gil81
If you need any missing files I can set up a dropbox (which I was thinking of doing anyway)...I have boot images, recovery images, system dumps from early releases, nvflash, boatloader and all the rest. Think the battery drain looks the only option for him at moment.
Sent from my GT-P7510 using XDA Premium 4 mobile app
stinky73 said:
@Gil81
If you need any missing files I can set up a dropbox (which I was thinking of doing anyway)...I have boot images, recovery images, system dumps from early releases, nvflash, boatloader and all the rest. Think the battery drain looks the only option for him at moment.
Sent from my GT-P7510 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you guys,
that was the first thing i tried. nothing appear on screen.
I'll try again but i don't think it will change something...
Gil81 said:
Put it on the wall charger and see if the charging animation comes up....if it does...let it charge.. I think we can get it into recovery or download mode if not recovery....if we get to recovery... You will probably have to do a factory reset,but I want you to tell me what options you have in recovery.. been a while since I seen stock recovery..can't remember ..We'll proceed from there..if the charging animation doesn't come up..let it charge anyway... I need to see where it stands so I can help you proceed correctly.......Just looked at stock recovery..we will have to do a factory reset...
Click to expand...
Click to collapse
Ok so i get nothing on screen when i tried to power it up or boot in download mode. after a 1:30 charge time.
i let it charge for 5 hours and it didn't change anything.
I opened the tab and unpluged the battery press the power button for a few seconds and plug it back. Didn't change anything.
Is there something else i should try?
Thank you
Gariep said:
Hi guys,
I'm have a GT-P7510 that won't power up. usually when the battery died i just had to press power button for 10 -15 sec and it boot up. But now, nothing. except when plug in a computer
the tab was shown as apx device in device manager.
i installed the apx driver and it is now shown as NVIDIA USB Boot-recovery driver for Mobile devices
I search for a fix but i didn't find any yet.
You guys have any fix for me?
thank you
Click to expand...
Click to collapse
Since you state that it powers up into apx mode and can't seem to get it to do anything else. I'm afraid you're in a situation I encountered over a year ago. I was unable to find anything to help while only in apx mode. I ended up sending it in for repair. The battery drain method has work for some and I used to point people to the post. It seems that most people having issues similar to yours were not getting any results from it recently.
Hopefully someone does have something that will help you get back out of apx mode.
I wish you the best of luck.
Sent from my GT-P7510 using XDA Premium HD app
Gariep said:
i let it charge for 5 hours and it didn't change anything.
I opened the tab and unpluged the battery press the power button for a few seconds and plug it back. Didn't change anything.
Is there something else i should try?
Thank you
Click to expand...
Click to collapse
What do you mean ( opened the tab )...I got ya..had to re-read the thread..Sorry..but I'm helping 4 people in two different threads... .. I think the power drain might be you're only solution at this point...if you have already tried that by pulling the battery..then youre going to have to take it in I think...Sorry I couldn't be more helpful...let me now what ya think...
Hey
I unlocked my bootloader easylie but I tried the how to from ejdan
With the sgp611 insecure from post 3 but after fastboot boot z3tc... It started just normal but like an Factory reset. So After that I tried the how to from post 25# with twrp and After Point 3 my Device doesnt Start anymore I was waiting 25minutes but nothing Happens and ADB Shell Sayd no device found.
Have I to throw my device into the trash?
Please help me.
nerke said:
Hey
I unlocked my bootloader easylie but I tried the how to from ejdan
With the sgp611 insecure from post 3 but after fastboot boot z3tc... It started just normal but like an Factory reset. So After that I tried the how to from post 25# with twrp and After Point 3 my Device doesnt Start anymore I was waiting 25minutes but nothing Happens and ADB Shell Sayd no device found.
Have I to throw my device into the trash?
Please help me.
Click to expand...
Click to collapse
Use flashtool and refashioned a firmware look for a guide and official firmware ftf
---------- Post added at 09:03 PM ---------- Previous post was at 09:02 PM ----------
nerke said:
Hey
I unlocked my bootloader easylie but I tried the how to from ejdan
With the sgp611 insecure from post 3 but after fastboot boot z3tc... It started just normal but like an Factory reset. So After that I tried the how to from post 25# with twrp and After Point 3 my Device doesnt Start anymore I was waiting 25minutes but nothing Happens and ADB Shell Sayd no device found.
Have I to throw my device into the trash?
Please help me.
Click to expand...
Click to collapse
Use flashtool and refash a firmware look for a guide and official firmware ftf
Plug the USB cable into the computer
Power off the device
Hold the volume up button
connect the USB cable
You should get a blue LED illuminated on the top of the device; then follow the instructions here from click 7
Did you read these instructions?
did you have enough battery to do that and does the tablet have any juice left?
Hej everyone.
I did pretty much as far as nerke, but after flashing the img, I also cannot turn on the device again. The LED won't light up at all, neither holding vol up and plugging in the usb not by holding vol down while pressing power. No life sign anymore. Any ideas?
iklemp said:
Hej everyone.
I did pretty much as far as nerke, but after flashing the img, I also cannot turn on the device again. The LED won't light up at all, neither holding vol up and plugging in the usb not by holding vol down while pressing power. No life sign anymore. Any ideas?
Click to expand...
Click to collapse
Do you think it might be a hardware issue? I experienced some of the same things you're describing. The only thing though, is that I wasn't doing any firmware or software flashes on the tablet. If it's a hardware problem, you might be able to send it in to get it serviced by Sony's warranty.
AirBruce said:
Do you think it might be a hardware issue? I experienced some of the same things you're describing. The only thing though, is that I wasn't doing any firmware or software flashes on the tablet. If it's a hardware problem, you might be able to send it in to get it serviced by Sony's warranty.
Click to expand...
Click to collapse
I guess my warranty is voided after unlocking the bootloader. But if I find no solution, it might be worth a try...
My tablet is having the same issue. Won't turn on, no LED illuminates when plugged in to either computer or AC, and no amount of button presses will get it to do anything. Horrible.
so i was flashing existenz MM and i can't go to recovery mode, before installing it i have xzdual recovery installed, so i thought i can just flash it again (and ofc it was stupid because after that i just know xzdual won't work with MM) so it's bootloop even when i charge it, the problem is the battery died and it won't fill the battery, the phone keep restarting when plugged in with charger so it keeps draining the battery before it filled up, i can't flash it because of that, the question is, how can i fill the battery so that i can flash it using flashtool?
thanks, and sorry if my English is bad.
kuhaku319 said:
so i was flashing existenz MM and i can't go to recovery mode, before installing it i have xzdual recovery installed, so i thought i can just flash it again (and ofc it was stupid because after that i just know xzdual won't work with MM) so it's bootloop even when i charge it, the problem is the battery died and it won't fill the battery, the phone keep restarting when plugged in with charger so it keeps draining the battery before it filled up, i can't flash it because of that, the question is, how can i fill the battery so that i can flash it using flashtool?
thanks, and sorry if my English is bad.
Click to expand...
Click to collapse
If there is no other way you can always open the phone and charge the battery manually(if you have the equipment to do that). I had to do that to my phone yesterday(my battery was so low that it wouldn't boot).
BlAckXpeRia said:
If there is no other way you can always open the phone and charge the battery manually(if you have the equipment to do that). I had to do that to my phone yesterday(my battery was so low that it wouldn't boot).
Click to expand...
Click to collapse
how can i remove the case to get the battery out of the phone? its not removable right?
uh. no one?
kuhaku319 said:
how can i remove the case to get the battery out of the phone? its not removable right?
Click to expand...
Click to collapse
You have to use a hairdryer. There are tutorials on YouTube.
kuhaku319 said:
so i was flashing existenz MM and i can't go to recovery mode, before installing it i have xzdual recovery installed, so i thought i can just flash it again (and ofc it was stupid because after that i just know xzdual won't work with MM) so it's bootloop even when i charge it, the problem is the battery died and it won't fill the battery, the phone keep restarting when plugged in with charger so it keeps draining the battery before it filled up, i can't flash it because of that, the question is, how can i fill the battery so that i can flash it using flashtool?
thanks, and sorry if my English is bad.
Click to expand...
Click to collapse
The phone should also be able to charge in recovery. Try that.
Btw. I recently flashed a Z2 via flashtool with an unplugged battery (usb power was enough), so you could also try flashing it now although it's empty.
Sent from Note 3, Xiaomi Redmi Note 3.
mr.loverlover said:
You have to use a hairdryer. There are tutorials on YouTube.
The phone should also be able to charge in recovery. Try that.
Btw. I recently flashed a Z2 via flashtool with an unplugged battery (usb power was enough), so you could also try flashing it now although it's empty.
Sent from Note 3, Xiaomi Redmi Note 3.
Click to expand...
Click to collapse
Thank you for the reply,
but the phone cant boot to recovery.
so i should remove the battery and try to flash it without battery plugged in?
because i tried to charge the phone overnight with no luck, havent tried removing the case yet because im not experienced to remove them, is there any alternative that i should try without touching the hardware stuff?
kuhaku319 said:
Thank you for the reply,
but the phone cant boot to recovery.
so i should remove the battery and try to flash it without battery plugged in?
because i tried to charge the phone overnight with no luck, havent tried removing the case yet because im not experienced to remove them, is there any alternative that i should try without touching the hardware stuff?
Click to expand...
Click to collapse
I would first try to flash just like it is now, without opening the back cover.
Opening the back panel is the last option I would consider, but only if everything else fails.
The thing with opening back cover is, that you will most likely damage you back panel, and you will have to order some new, fake raplecement + the phone won't be waterproof anymore.
And if you can get your phone into fastboot mode (and you've got unlocked bootloader) then just use "adb fastboot flash boot boot.img" command to flash some kernel with recovery.
Sent from Note 3, Xiaomi Redmi Note 3.
kuhaku319 said:
Thank you for the reply,
but the phone cant boot to recovery.
so i should remove the battery and try to flash it without battery plugged in?
because i tried to charge the phone overnight with no luck, havent tried removing the case yet because im not experienced to remove them, is there any alternative that i should try without touching the hardware stuff?
Click to expand...
Click to collapse
Have you tryied to plug it in and then press power and volume up continiusly until you fell three vibrations? i think this is for reseting the phone if you continue to press until another vibration it will shut down and maybe then it will charge. Also this thread had helped me before http://forum.xda-developers.com/showthread.php?t=1849170
NatNikos said:
Have you tryied to plug it in and then press power and volume up continiusly until you fell three vibrations? i think this is for reseting the phone if you continue to press until another vibration it will shut down and maybe then it will charge. Also this thread had helped me before http://forum.xda-developers.com/showthread.php?t=1849170
Click to expand...
Click to collapse
Thanks you for the reply
i tried the vol up + power only one time until it vibrates 3 times for the first time and its off, but when i plugged the charger its continues on bootloop cycles thus battery not filling up.
i guess im gonna try until another vibration and see what happen.
and thank you for the link, im gonna give it a try too later, im not home right now, cheers.
kuhaku319 said:
Thanks you for the reply
i tried the vol up + power only one time until it vibrates 3 times for the first time and its off, but when i plugged the charger its continues on bootloop cycles thus battery not filling up.
i guess im gonna try until another vibration and see what happen.
and thank you for the link, im gonna give it a try too later, im not home right now, cheers.
Click to expand...
Click to collapse
Maybe you should try it while plugged in also.
mr.loverlover said:
I would first try to flash just like it is now, without opening the back cover.
Opening the back panel is the last option I would consider, but only if everything else fails.
The thing with opening back cover is, that you will most likely damage you back panel, and you will have to order some new, fake raplecement + the phone won't be waterproof anymore.
And if you can get your phone into fastboot mode (and you've got unlocked bootloader) then just use "adb fastboot flash boot boot.img" command to flash some kernel with recovery.
Sent from Note 3, Xiaomi Redmi Note 3.
Click to expand...
Click to collapse
yeah i tried flashing it but the phone is totally dead, pc wont detect the phone because the phone is dead. that's the issue im facing now :silly:
NatNikos said:
Maybe you should try it while plugged in also.
Click to expand...
Click to collapse
tried, still bootlooped, when i hold power + vol up while plugged in, its powered on again and started bootlooping again
im just wondering. did u use flashtool to flash the ftf again?
Dilesh Perera said:
im just wondering. did u use flashtool to flash the ftf again?
Click to expand...
Click to collapse
yes, im using flashtool, but when i plug the phone in fastboot mode, flashtool doesnt detect the phone because phone died, no battery.
if i plug the phone in fastboot (hold vol down & plug the usb) will it charge?
kuhaku319 said:
yes, im using flashtool, but when i plug the phone in fastboot mode, flashtool doesnt detect the phone because phone died, no battery.
if i plug the phone in fastboot (hold vol down & plug the usb) will it charge?
Click to expand...
Click to collapse
ok try like this
1 put phone off ( u can press the little red button inside the left side flap till it vibrate 3 times )
2 disconnect the cable from Pc
3 open flashtool and select FLASHMODE select the ftf u going to flash
4 once the flashtool request to connect the phone connect the phone while keep on pressing the vol button
it should flash the ftf
kuhaku319 said:
yes, im using flashtool, but when i plug the phone in fastboot mode, flashtool doesnt detect the phone because phone died, no battery.
if i plug the phone in fastboot (hold vol down & plug the usb) will it charge?
Click to expand...
Click to collapse
It won't probably charge in fastboot/flashmode.
But it's very strange that the PC won't detect your phone when trying to enter flashmode.
Because, as I said earlier, I was able to get Z2 into flashmode without any power (battery taken out).
There should be some change in device manager when you connect the device.
Are you sure all the drivers are installed on your PC?
Dilesh Perera said:
ok try like this
1 put phone off ( u can press the little red button inside the left side flap till it vibrate 3 times )
2 disconnect the cable from Pc
3 open flashtool and select FLASHMODE select the ftf u going to flash
4 once the flashtool request to connect the phone connect the phone while keep on pressing the vol button
it should flash the ftf
Click to expand...
Click to collapse
mr.loverlover said:
It won't probably charge in fastboot/flashmode.
But it's very strange that the PC won't detect your phone when trying to enter flashmode.
Because, as I said earlier, I was able to get Z2 into flashmode without any power (battery taken out).
There should be some change in device manager when you connect the device.
Are you sure all the drivers are installed on your PC?
Click to expand...
Click to collapse
Solved
Apparently the driver is acting weird, but i uninstalled all z2 driver and reinstall them, all working and can be flashed
Thank you guys for helping me :fingers-crossed::highfive:
Hi All,
I know there are alot of similar threads but I would just like to get the forums opinion on what my options are with my bricked SM-G925F S6 Edge mobile?
Just to outline the chain of events, the phone is all stock, no custom kernel or custom ROM. and was never rooted. After applying the pushed Samsung Android update the phone crashed I manually rebooted via recovery mode and had to do a full system wipe as it continued to crash on boot. After reaching a stable boot the update was requesting to be downloaded once again which I accepted. All looked well and seemed to apply the update but the boot cycle crashed and has been un responsive ever since.
Tried to recover the device as below but no joy:
1.Long press power
2.Attempted power+volume down
3.No Recovery mode power+volume up+home
4.No Download mode power+volume down+home
5.All buttons together power+volume up/down+home
6.Plugging oem power charger no response
I would appreciate any advice, is a jtag the next route ?
Thanks in advance
celtic81 said:
Hi All,
I know there are alot of similar threads but I would just like to get the forums opinion on what my options are with my bricked SM-G925F S6 Edge mobile?
Just to outline the chain of events, the phone is all stock, no custom kernel or custom ROM. and was never rooted. After applying the pushed Samsung Android update the phone crashed I manually rebooted via recovery mode and had to do a full system wipe as it continued to crash on boot. After reaching a stable boot the update was requesting to be downloaded once again which I accepted. All looked well and seemed to apply the update but the boot cycle crashed and has been un responsive ever since.
Tried to recover the device as below but no joy:
1.Long press power
2.Attempted power+volume down
3.No Recovery mode power+volume up+home
4.No Download mode power+volume down+home
5.All buttons together power+volume up/down+home
6.Plugging oem power charger no response
I would appreciate any advice, is a jtag the next route ?
Thanks in advance
Click to expand...
Click to collapse
So the device is dead or unresponsive/bootloop?.
Sent from my SM-G925F
Dead pretty much sums it up yes.
celtic81 said:
Dead pretty much sums it up yes.
Click to expand...
Click to collapse
I think I read somewhere here usb jig is working on S6. Try your luck.
Sent from my SM-G925F
celtic81 said:
Hi All,
I know there are alot of similar threads but I would just like to get the forums opinion on what my options are with my bricked SM-G925F S6 Edge mobile?
Just to outline the chain of events, the phone is all stock, no custom kernel or custom ROM. and was never rooted. After applying the pushed Samsung Android update the phone crashed I manually rebooted via recovery mode and had to do a full system wipe as it continued to crash on boot. After reaching a stable boot the update was requesting to be downloaded once again which I accepted. All looked well and seemed to apply the update but the boot cycle crashed and has been un responsive ever since.
Tried to recover the device as below but no joy:
1.Long press power
2.Attempted power+volume down
3.No Recovery mode power+volume up+home
4.No Download mode power+volume down+home
5.All buttons together power+volume up/down+home
6.Plugging oem power charger no response
I would appreciate any advice, is a jtag the next route ?
Thanks in advance
Click to expand...
Click to collapse
1. What exactly is the phone doing now?
2. You deffinately cant boot into download mode? Try holding buttons for about 20 seconds and keep repeating?
3. Is the device detected when plugged into pc/smart switch?
4. Did you ever enable dev options and usb debugging?
callumbr1 said:
1. What exactly is the phone doing now?
2. You deffinately cant boot into download mode? Try holding buttons for about 20 seconds and keep repeating?
3. Is the device detected when plugged into pc/smart switch?
4. Did you ever enable dev options and usb debugging?
Click to expand...
Click to collapse
Current status unresponsive.
My hope was download mode but not happening.
No detection via smart switch.
Dev options would have been enabled yes.
Any merit in opening up to physically disconnect reconnect battery?
celtic81 said:
Current status unresponsive.
My hope was download mode but not happening.
No detection via smart switch.
Dev options would have been enabled yes.
Any merit in opening up to physically disconnect reconnect battery?
Click to expand...
Click to collapse
The first thing would be to flash stock.. but as you can't get into download mode its a bit tricky.
Have you tried to initialize phone with serial and imei with smart switch? This should detect phone and run emergency software fix?
I wouldnt attempt to remove my battery as you have to heat up the back to melt the glue to remove the glass.
Sometimes when the phone is in the state it is in its hard to get to download mode but it eventually does.
Try to get it powered off, keep holding power and vol down or just power for 20-40 seconds. It will eventually go off then try download mode.
celtic81 said:
Current status unresponsive.
My hope was download mode but not happening.
No detection via smart switch.
Dev options would have been enabled yes.
Any merit in opening up to physically disconnect reconnect battery?
Click to expand...
Click to collapse
If the phone still can be powered on but it's stuck somewhere during boot, can force reset by pressing power+vol down for 30s or more.
Sent from my SM-G925F
Not getting anywhere with the powering off/download mode, sounds defeatist, but looks like its done.
Does it mean anything that the phone doesn't recognise the power charger is connected either?
Rosli59564 said:
I think I read somewhere here usb jig is working on S6. Try your luck.
Click to expand...
Click to collapse
I think I will give the jig a go cant really lose any more than I already have. .
celtic81 said:
Not getting anywhere with the powering off/download mode, sounds defeatist, but looks like its done.
Does it mean anything that the phone doesn't recognise the power charger is connected either?
Click to expand...
Click to collapse
If it wont power on or recognise power charger that sounds like actually bricked phone or hardware problem. Safest way would be to just take it to service centre
---------- Post added at 05:15 AM ---------- Previous post was at 05:12 AM ----------
celtic81 said:
I think I will give the jig a go cant really lose any more than I already have. .
Click to expand...
Click to collapse
The usb jig only works up to s4
callumbr1 said:
If it wont power on or recognise power charger that sounds like actually bricked phone or hardware problem. Safest way would be to just take it to service centre
---------- Post added at 05:15 AM ---------- Previous post was at 05:12 AM ----------
The usb jig only works up to s4
Click to expand...
Click to collapse
Ok that's fair enough then. Will see if they can revive it.
What percentage chance of survival would you give it. 50/50 ?
celtic81 said:
Ok that's fair enough then. Will see if they can revive it.
What percentage chance of survival would you give it. 50/50 ?
Click to expand...
Click to collapse
Well as you said in your first post it was all stock and never rooted so they will more likely be able to revive it. Fingers crossed mate
callumbr1 said:
Well as you said in your first post it was all stock and never rooted so they will more likely be able to revive it. Fingers crossed mate
Click to expand...
Click to collapse
Thanks for all your replies its appreciated. Will let you know the outcome. .
celtic81 said:
Thanks for all your replies its appreciated. Will let you know the outcome. .
Click to expand...
Click to collapse
No problem mate keep me updated
callumbr1 said:
No problem mate keep me updated
Click to expand...
Click to collapse
Sorry for the delay in updating the outcome on this. Life got in the way. So basically the bootloader was bricked and needed rebuilding. JTAG was needed so was pretty lucky.
Thanks for all the responses...