InvictaOS is based on LineageOS with some cool extra features. It can be used without any need to have Google application's installed.
DO NOT FLASH LUCKYPATCHER ON InvictaOS BUILDS. I WILL NOT BE RESPONSIBLE FOR THE OUTCOME IF YOU CHOOSE TO DO SO. YOU HAVE BEEN WARNED.
WARNING! This ROM is for the GT-I9200 and GT-I9205 variant's only! If you choose to flash this on other variant's, you will face issues. You are on your own to fix issues.
Code:
/*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Additional Features
Status Bar date
Network Traffic Indicators
Double Tap to sleep on lockscreen
Ambient display battery indicator
Additional QS Tiles
Superuser indicator toggle
Lockscreen charging information
Bluetooth easy toggle
Wifi easy toggle
Toggle to disable suggestions & tile summaries
Unlink notification volume
Pixel navigation bar and animation
Full Substratum OMS theme support
Alarm blocker
Wakelock blocker
Selinux Switch
and more....
Installation procedure
From stock / other custom roms
Plus users have to be on N modem. For models that can't flash N modem, you will have issues with fingerprint registration.
Copy the ROM zip on your phone
Reboot in TWRP Recovery mode
Backup your phone!
Format/Wipe system, cache, dalvik, data
Flash/Install ROM
Flash Install Gapps (OpenGapps ARM N 7.1 Mini/Nano is recommended. DO NOT FLASH STOCK/FULL GAPPS. YOUR PHONE APP WILL FC!!!)
Reboot
Upgrade from previous build
Download the update via OTA app.
Reboot in TWRP Recovery mode
Format/Wipe only cache, dalvik
Flash/Install ROM
Gapps flash is not required for a dirty flash as the backup script in the rom zip file backs up and restores gapps during ROM flash. You can flash gapps after rom flash if you choose to do so. OpenGapps ARM N 7.1 Mini is recommended.
Reboot
Downloads
ROM : Latest build : here || Older builds : here
TWRP : https://sourceforge.net/projects/invictaos/files/Mega-6.3/TWRP/
GAPPS : OpenGapps ( Make sure you use the one for 7.1 - pico is the safest bet )
Screenshots
Note that the screenshots seen above are not the default look of the ROM. It comes with Pixel UI by default. Screenshots are using Coalfield substratum theme and Retrorika icon pack. They are from my MotoG4 plus. Some features may not work on this device.
Updates
You will be notified via the OTA app when there is an update.
Known issues
You tell me...
Reporting Bugs
You are allowed to report bugs only in this thread.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. The following is a useful format to follow.
Code:
What is your--
Radio (baseband):
ROM version:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
LOSSettings/Performance settings (other than stock):
Dual SIM:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
The team
@Silesh.Nair - Project lead
@1chrome - UI designer
Credits
Team LineageOS
Arne Coucheron aka @arco68. Without him, we would not have got a single custom rom. We have cm11,cm12,cm13 & now cm14 due to his hard work and willingness to help others. A big :good: to you, Sir!!!
A big thanks to all users who have helped to test builds as I do not own the device.
@Gibbon_999 for the logs and screenshots.
Others I might have missed.
All users of my roms.
Kernel Sources
https://gitlab.com/sileshn/android_kernel_samsung_msm8930-common
Donations Received
@r1l_Alex_? ( Multiple times, lost count )
@Mr. Obsolet ( Multiple times, lost count )
@gavron ( Multiple )
@bullfinch110
@strongst
@guenterm800
@Retoki
@alaindupus
@dercircle
@echo92
@Tilagoon
@kiden
@bovineyard
@pastorbob62
@syverman
Kai Min?en ( Don't know your user name on xda )
Philip Wehrheim ( Don't know your user name on xda )
Joao Henrique Queiroz ( Don't know your user name on xda )
Robert Rhumba ( Don't know your user name on xda )
It's fine to just click Thanks! or enjoy my work without saying anything.
A donation is to show appreciation of the work I have done already.
A donation is not by any means in expectation of future work.
A donation doesn't entitle for preferred/private support/requests.
A donation is meant as a gift - always appreciated, never required.
MicroG - Not for those who want the easy way out...
What is microg
Microg is a free re-implementation of Google’s proprietary Android user space apps and libraries. In layman terms, it replaces the need to flash gapps. For more details visit the official site.
Sources
https://github.com/microg
Downloads
https://sourceforge.net/projects/los-oms/files/MicroG/MicroG-032317.zip/download
The zip file contains the following files.
Fdroid
Google playstore
Google contacts & calendar sync apk's
Do not install playstore as a user app. It will not work. Playstore has to be in /system/priv-app for this to work.
How do I install this?
March 23rd build will be the first release with support for microg. Fresh flash is a must. Don't even ask if it will work dirty flashing over a rom with gapps. It won't. If you choose not to use microG, you can dirty flash over the previous build.
First build
Download rom from the link in the OP.
Download microg apps from the link above.
Wipe system/cache/data
Flash rom followed by microg apps
Reboot.
Download and install the following apps from the links below.
microG Services Core : here
microG Services Framework Proxy : here
Apple UnifiedNlp Backend : here
MozillaNlpBackend : here
NominatimNlpBackend : here
The last 3 can also be downloaded using the fdroid app.
Updates
Flash rom followed by microg apps without wipe.
How do I set this up?
Go to Settings->Additional Features->Miscellaneous Settings and activate signature spoofing. See screenshot.
Go to Settings->Apps->(Gear Icon)->App permissions->Spoof package signatures and activate spoofing for microG Services Core. See screenshot.
Go to Setings->Battery->Battery optimization and disable battery optimization for the following seen in the screenshot. microG Services Core and Services Framework Proxy should not be battery optimized. Others are optional.
Goto Settings->Apps->(3 dot menu)->Show system and update permissions for Google contact & calendar sync if not updated by default.
Open microG settings app from app drawer and configure backgrounds under UnifiedNlp Settings. See screenshot.
Enable Google device registration and Google Cloud Messaging under Google Services. See screenshot.
Reboot phone. This is a must.
Once you get back to your home screen, open the microG settings app and click on Self-Check. All options must be switched on. That's it. Open playstore and add your account. Read the official webpage or the xda thread for more information. Have fun!!!
Issues
Afaik, the only app that doesn't work is hangouts. I didn't have any other problems.
You may also face delayed notifications from certain apps or for that matter no notifications. If you face such a situation, don't restore data for that app using tibu. Also don't battery optimize that app. Classic examples include mail, google+, whatsapp, tapatalk.
Omg again silesh. Ty!!
Looking good here on my end! Like stated video record isn't functional... All else seems ok for now... I haven't had a chance to hot test... Will be done by the end of the day!!
Damn near a daily Silesh!! Awesome!!
And we start again!! Here we go!!
Other variants
If there is someone running this on a device other than I9200 or I9205, can you provide me with the build.prop from the stock rom. Also mention your model number.
Test build 4 - Backup before you try this. It may not boot.
https://www.androidfilehost.com/?fid=24686681827315503
md5: 022671029fc45f571e2f303c1f38f59c
I have made some changes for this build. I need the following checked on both I9200 & I9205 devices. Fresh flash required.
Does the model no show GT-I9200 or GT-I9205 correctly under Settings->About phone depending on the device? Provide screenshots.
Is the aosp keyboard the default? Does it work? or you need to manually set it as default under Settings->Languages & Input. Provide screenshots.
Is there a physical keyboard entry named "sii9234" under Settings->Languages & Input? Is it set as the default keyboard? Provide screenshots.
Anything else you want to report as out of the ordinary?
If the device is stable to use, can you use it for a while and test for battery usage, any signs of heating and ghost touches.
Thanks in advance.
@Silesh.Nair
My camera working except for video recording..
Flashed gapps and gets play services stopped working
Silesh.Nair said:
https://www.androidfilehost.com/?fid=24686681827315503
md5: 022671029fc45f571e2f303c1f38f59c
I have made some changes for this build. I need the following checked on both I9200 & I9205 devices. Fresh flash required.
Does the model no show GT-I9200 or GT-I9205 correctly under Settings->About phone depending on the device? Provide screenshots.
Is the aosp keyboard the default? Does it work? or you need to manually set it as default under Settings->Languages & Input. Provide screenshots.
Is there a physical keyboard entry named "sii9234" under Settings->Languages & Input? Is it set as the default keyboard? Provide screenshots.
Anything else you want to report as out of the ordinary?
If the device is stable to use, can you use it for a while and test for battery usage, any signs of heating and ghost touches.
Thanks in advance.
Click to expand...
Click to collapse
About to flash it for testing in a little bit.. I should be free for testing for the next few days so ill make sure to really get to work on it!!
I'll update you here in about a hour or so...
Thank you!!
Silesh.Nair said:
https://www.androidfilehost.com/?fid=24686681827315503
Does the model no show GT-I9200 or GT-I9205 correctly under Settings->About phone depending on the device? Provide screenshots.
Click to expand...
Click to collapse
Yes - GT-I9205
[*]Is the aosp keyboard the default? Does it work? or you need to manually set it as default under Settings->Languages & Input. Provide screenshots.
Click to expand...
Click to collapse
Yes
[*]Is there a physical keyboard entry named "sii9234" under Settings->Languages & Input? Is it set as the default keyboard? Provide screenshots.
Click to expand...
Click to collapse
No
[*]Anything else you want to report as out of the ordinary?
Click to expand...
Click to collapse
Camera isn't working.
EDIT: Camera is working now after a couple of reboots.
If the device is stable to use, can you use it for a while and test for battery usage, any signs of heating and ghost touches.
Click to expand...
Click to collapse
Changes made in Settings -> Display are not being saved.
Silesh.Nair said:
https://www.androidfilehost.com/?fid=24686681827315503
md5: 022671029fc45f571e2f303c1f38f59c
I have made some changes for this build. I need the following checked on both I9200 & I9205 devices. Fresh flash required.
Does the model no show GT-I9200 or GT-I9205 correctly under Settings->About phone depending on the device? Provide screenshots.
Is the aosp keyboard the default? Does it work? or you need to manually set it as default under Settings->Languages & Input. Provide screenshots.
Is there a physical keyboard entry named "sii9234" under Settings->Languages & Input? Is it set as the default keyboard? Provide screenshots.
Anything else you want to report as out of the ordinary?
If the device is stable to use, can you use it for a while and test for battery usage, any signs of heating and ghost touches.
Thanks in advance.
Click to expand...
Click to collapse
@Silesh.Nair
Fresh flash cm14-20160910 , phone is boot.
All works as state on OP. Video recording not working and its known issues.
Default keyboard: Aosp
No physical keyboard entry name 'sii9234'
Gonna use this build for a whole days, because the last build (20160909) has ghost touch. Will report back if any.
Here is some screen.
Sent from my GT-I9205 using Tapatalk
Anyone tried the last build on an I9200?
Sent from my Moto G⁴ Plus using Tapatalk
Doh ! - still getting Ghost Touch with this latest version.
EDIT:
So sitting and watching logcat and the phone at the same time - when the ghost settings menu pops up - this event occurs at about the same time.
Code:
09-11 12:05:44.971 730 730 D KeyguardUpdateMonitor: received broadcast android.intent.action.BATTERY_CHANGED
09-11 12:05:44.978 730 730 D KeyguardUpdateMonitor: handleBatteryUpdate
@Silesh.Nair
I can't access anything on the sd card even i want to install an apk..
I noticed that camera only works with google camera
Saiful98 said:
@Silesh.Nair
I can't access anything on the sd card even i want to install an apk..
I noticed that camera only works with google camera
Click to expand...
Click to collapse
Install another file manager from playstore.
Sent from my GT-I9205 using Tapatalk
neilphetamine said:
Install another file manager from playstore.
Click to expand...
Click to collapse
What type of gapps do you install..
Bc i always get play services stopped working
Saiful98 said:
What type of gapps do you install..
Bc i always get play services stopped working
Click to expand...
Click to collapse
I'm using Pico from OpenGapps.
Sent from my GT-I9205 using Tapatalk
Saiful98 said:
What type of gapps do you install..
Bc i always get play services stopped working
Click to expand...
Click to collapse
neilphetamine said:
I'm using Pico from OpenGapps.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
Isn't that mentioned very clearly in the OP?
Sent from my Moto G⁴ Plus using Tapatalk
Silesh...
I can't toggle flashlight
Tried to reboot several times but same still
But flash in camera working
Camera is buggy.
Sent from my Moto G⁴ Plus using Tapatalk
Hi. Tried the latest build on GT-i9200
Clean Flash , Opengapps Pico.
Call,Data,Sound,everything works smooth.
Camera works, Video recording does'nt.
Ambient display and other options in Display Setting dosent get apply.
Thanks Sir For Great ROM. :good:
Also ghost touch is present.
File manager works
flashlight toggle works too.
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KK), which is designed to increase performance and reliability over stock Android for your device.
------------THIS IS AN UNOFFICIAL UNSUPPORTED BUILD-----------
This is my attempt at porting CyanogenMod 11 to the Galaxy Tab 4 10.1. I use a SM-T530NU, so that is the only device I have tested.
Any other device variations have not been tested and are at your own risk. I will not be able to support other variations as I don't own them for testing.
Special thanks to MetaIIica - I have been using his Alpha build of PAC-ROM KitKat since December. I studied the code for that, along with stock and some other ROMs before starting this port. This is my first time doing any work with Android, so I'm not sure if I'm technically doing things correctly or not.
I know CyanogenMod 12 is under development already, but I have decided to do a CM11 based build in hopes of a making a stable daily driver offering. I have fixed many of the issues present that were present in the PAC-ROM build. They can probably be backported to PAC-ROM easily if its built with my tree, but I prefer the plain CM-based offering myself.
You may get the source of my changes for this ROM on my github. If you'd like to help and submit a patch, feel free to open a pull request. You will of course be credited accordingly.
See below for instructions, what's working, and issues I fixed over the PAC-ROM Alpha.
For any bug reports or feature requests, please use the appropriate tabs at the top of the thread. Please include as much information as possible and if possible a logcat or other debug information in the case of bugs. Requests for supporting other device variations will not be honored - sorry,
Feedback and constructive criticism is always appreciated. I hope you enjoy using the ROM; if you use the ROM, please consider leaving a thanks, rating, and/or review
CURRENT VERSION:
DOWNLOAD LINK - 04/26/2015
OLD VERSIONS:
DOWNLOAD LINK - 04/20/2015
DOWNLOAD LINK - 04/19/2015
DOWNLOAD LINK - 04/07/2015
DOWNLOAD LINK - 04/05/2015
DOWNLOAD LINK - 04/04/2015
DOWNLOAD LINK - 04/03/2015
DOWNLOAD LINK - 03/29/2015
DOWNLOAD LINK - 03/24/2015
DOWNLOAD LINK - 03/23/2015
DOWNLOAD LINK - 03/22/2015
INSTRUCTIONS
- Install PhilZ Touch Recovery (recommended)
- Copy CM11 & GAPPS (Optional) ZIPs to your SDCard
- Boot into Recovery
- Do "Clean to Install a New ROM" (FULL WIPE REQUIRED INCLUDING SYSTEM, NOT JUST DATA/CACHE - even if coming from another CM-based ROM, as my device tree is different)
- Flash CM11 ZIP
- Flash GApps zip from SDCard
- Reboot
UPGRADING
-In general, you should be able to just flash over the previous build, but if you encounter any weird issues please clean using the steps above
Working that I've tested:
Audio: Speakers, Headphones, Bluetooth
Bluetooth
CIFS/NFS (Network File Systems - see notes below)
Front Camera
GPS
IR Blaster [SM-T530NU Only]
Magnetic Cover Sleep/Wake
MTP
Rear Camera
USB OTG
Video (w/ Hardware Decoding)
WiFi (2.4ghz & 5ghz)
NOTE ON BUTTONS: This ROM is configured to use the hardware buttons-- so you won't see the software buttons taking up space at the bottom of the screen, as they are disabled. This is not a bug. Use the hardware buttons, as they are the same. If you really want the software buttons for some reason, edit /system/build.prop, change qemu.hw.mainkeys to 0, save, and reboot. If you map the menu button to a long press of another button, some apps such as TitaniumBackup will count this as a hardware key and hide their soft menu button - but only after a reboot.
NOTE ON CIFS/NFS: Many of the mounting utilities on the play store are outdated and broken due to changes in the linux kernel. For best luck, mount using the command line. For CIFS, you can tweak CIFSManager into working - see this thread
CHANGELOG:
[04/26/2015]
-Fix reading MAC address from EFS
-Fix suspending charging while the device is off (special thanks to @sub77 for pointing out the right config option)
[04/20/2015]
-Enable physical keyboard menu for use with BT/USB keyboards. Auto hides soft keyboard & allows selection of layout.
[04/19/2015]
-Add support for magnetic cover sleep/wake
[04/07/2015]
-Roll back to using the Non-CAF Display HAL Fixes SurfaceFlinger constantly eating 100% CPU
[04/05/2015]
-Fix issues with reconnecting Bluetooth Devices after a reboot (if upgrading, break pairing and re-pair all devices)
-Fix mounting /efs
-Fix persistant Bluetooth MAC Address
[04/04/2015]
-Fix issues with detecting whether or not the device has a hardware menu button.
[04/03/2015]
-Fix the Time Service, allowing Date & Time to persist during a reboot without a wifi connection. Special Thanks: sub77 for pointing the discussion in the thread in the right direciton on this
[03/29/2015]
-Support Bluetooth Audio & AVRCP
-Support Consumer IR [SM-T530NU Only]
-Upgrade Display HAL to CAF Version
-Misc Bugfixes and Cleanup
[03/24/2015]
-Fix Missing Sensors HAL (Fixes Autorotate regression from the last build)
-Behind the scenes work for IR (need someone to test on plain 530 as IR is NU only). Does not actually work yet because its using the stub HAL, but the kernel drivers are loaded, and the IR service runs.
[03/23/2015]
-Fix lighting issues with rear camera
-Reduce some dependencies on vendor libs.
[03/22/2015]
-Added support for Front/Back Camera
-Added support CIFS/NFS
-Fixed 5 ghz WiFi
-Fixed Duplicate VSYNC spam in logcat
-Fixed issues with video decoding (YouTube HD, MXPlayer HW+ Video, etc)
-Fixed various Bluetooth issues
-Fixed wallpaper issues with Trebuchet
-Identify device correctly as MSM8226 chipset
-Use Hardware Buttons by Default
XDA:DevDB Information
CyanogenMod 11 Unofficial [TM-530NU], ROM for the Samsung Galaxy Tab 4
Contributors
starlightknight
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Stable Release Date: 2015-03-29
Beta Release Date: 2015-03-22
Created 2015-03-29
Last Updated 2015-04-25
Congratulations ! :good:
Nice ROM, it installed fine on my T530 will test some more, thanks for the hard work
I got this installed but the back button and recents button didn't work at all. Its a fast rom though but it would be nice if it was a barebones CyanogenMod without the Pac Rom extras installed too.
Time for a new test, i'll test it in my t530 and report back the results.
Sent from my GT-I9300 using XDA Free mobile app
steve30x said:
I got this installed but the back button and recents button didn't work at all. Its a fast rom though but it would be nice if it was a barebones CyanogenMod without the Pac Rom extras installed too.
Click to expand...
Click to collapse
It is a pure Cyanogenmod without the Pac extras. If you're seeing them, make sure you did a full wipe before flashing as noted in the original post - you may have remnants of PAC-ROM in /system. The best way is to use PhilZ option to "Clean to Install a new ROM" as that wipes everything correctly. That could also be causing your issues with the back button as well. I completely rebuilt the device tree for this rom over the pac build, as that was based on MSM8974 when this is an MSM8226 device. If a full wipe wasn't done, you have stuff for the other device tree in /system that will mess things up. If the issue persists after a full wipe, please let me know what varient of 530 you're using, and pastebin a logcat of what happens when you press the back or recent events buttons.
starlightknight said:
It is a pure Cyanogenmod without the Pac extras. If you're seeing them, make sure you did a full wipe before flashing as noted in the original post - you may have remnants of PAC-ROM in /system. The best way is to use PhilZ option to "Clean to Install a new ROM" as that wipes everything correctly. That could also be causing your issues with the back button as well. I completely rebuilt the device tree for this rom over the pac build, as that was based on MSM8974 when this is an MSM8226 device. If a full wipe wasn't done, you have stuff for the other device tree in /system that will mess things up. If the issue persists after a full wipe, please let me know what varient of 530 you're using, and pastebin a logcat of what happens when you press the back or recent events buttons.
Click to expand...
Click to collapse
I always completely wipe everything before installing a new rom. Never wiping the tablet before installing a new rom might cause problems. I no longer have the rom installed. I will install it again and see if it was just a flike that it didnt work properly the last time. I also have Philz recovery installed because its the only one that has full brightness on the screen.
Simply great. Everything i need works great. Finally a kitkat aosp rom that given me everything i need. Flashed in TWRP on a t530 (wifi only) and running perfectly fine. Good job mate. If you want me to test anything on t530 just tell me.
Btw, otg works, so my usb keyboard is working.
Otg works, YouTube and twitch.tv works, BT works, rotation works, camera works, xposed works, everything i have tested works
Sent from my GT-I9300 using XDA Free mobile app
pirulazul said:
Simply great. Everything i need works great. Finally a kitkat aosp rom that given me everything i need. Flashed in TWRP on a t530 (wifi only) and running perfectly fine. Good job mate. If you want me to test anything on t530 just tell me.
Btw, otg works, so my usb keyboard is working.
Otg works, YouTube and twitch.tv works, BT works, rotation works, camera works, xposed works, everything i have tested works
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks! Glad to hear that it is working well for you. I believe the only difference between the SM-T530 and the SM-T530NU is the the NU has an IR blaster, which I haven't actually enabled yet. I need to figure out how to test that because I never use it. After i do that and post a build with IR, it will be useful if you check and make sure it doesn't break the regular 530. Those two from what I can tell are vary similar, its more of any celluar varients that I would be worried about, because this is build for wifi only..
Let me know if you find anything broken
I got this to work properly. I have one question though. Is there a way to get youtube working without having all the other GAPPS rubbish installed. I noticed that the tablet got slower as soon as I installed GAPPS. The tablet flies along without GAPPS installed and I only want youtube working without all that other rubbish bogging down the tablet.
steve30x said:
I got this to work properly. I have one question though. Is there a way to get youtube working without having all the other GAPPS rubbish installed. I noticed that the tablet got slower as soon as I installed GAPPS. The tablet flies along without GAPPS installed and I only want youtube working without all that other rubbish bogging down the tablet.
Click to expand...
Click to collapse
Glad its working for you now
To be honest, I'm not sure - you could try copying the Youtube APK off of the device and then side-loading it on a fresh install without installing all of GAPPs, but I'm not sure if that will just prompt you to install all of them or not if you do that.
Are there particular use cases you are noticing are slower? I did not really notice any difference with or without GAPPs, other than the initial boot time as they were unpacked and installed. If there are particular situations that cause this, then we could dump some logs to see if there is something that could or needs to be optimized.
starlightknight said:
To be honest, I'm not sure - you could try copying the Youtube APK off of the device and then side-loading it on a fresh install without installing all of GAPPs, but I'm not sure if that will just prompt you to install all of them or not if you do that.
Click to expand...
Click to collapse
I have youtube backed up with all my other apps with Titanium Backup and when I try running youtube without GAPPS it fails and a popup states Youtube has failed to start (or something similar) and if I install the GAPPS I have which is older than the version that is needed it tells me that google needs to be updated. So then I update that and tried freezing the google apps I dont want or use but youtube fails.
starlightknight said:
Are there particular use cases you are noticing are slower? I did not really notice any difference with or without GAPPs, other than the initial boot time as they were unpacked and installed. If there are particular situations that cause this, then we could dump some logs to see if there is something that could or needs to be optimized.
Click to expand...
Click to collapse
The whole tablet is slightly slower with GAPPS installed. I've opened a gapps zip with WINRAR and removed some of what I dont want and only left whats needed for play store to run so it improved a bit.
Hi,
I didn't try it for now...
But thanks for the good work!!
For the Gapps, have you try PAGapps?
It has different package with a lot of options.
The smallest one should be around 136Mo. You can also remove some apk with a config file.
All other apps are available on Play Store...
Gustave17 said:
Hi,
I didn't try it for now...
But thanks for the good work!!
For the Gapps, have you try PAGapps?
It has different package with a lot of options.
The smallest one should be around 136Mo. You can also remove some apk with a config file.
All other apps are available on Play Store...
Click to expand...
Click to collapse
The GAPPS package I modded is only 76MB. Its just the bare essentials
steve30x said:
The GAPPS package I modded is only 76MB. Its just the bare essentials
Click to expand...
Click to collapse
Oh ok, so it's what we need...
Y
steve30x said:
I have youtube backed up with all my other apps with Titanium Backup and when I try running youtube without GAPPS it fails and a popup states Youtube has failed to start (or something similar) and if I install the GAPPS I have which is older than the version that is needed it tells me that google needs to be updated. So then I update that and tried freezing the google apps I dont want or use but youtube fails.
The whole tablet is slightly slower with GAPPS installed. I've opened a gapps zip with WINRAR and removed some of what I dont want and only left whats needed for play store to run so it improved a bit.
Click to expand...
Click to collapse
I used an aroma based gapps. You can install only what you need. About using YouTube without gapps, i dont know if tubemate could do the trick. Use aptoide to install it if you dont like play store. Here is the link for the aroma gapps: http://forum.xda-developers.com/showthread.php?t=2547250
Sent from my GT-I9300 using XDA Free mobile app
---------- Post added at 11:01 PM ---------- Previous post was at 10:45 PM ----------
Oh, forgot one thing, rear camera is too dark but frontal camera is fine.
Sent from my GT-I9300 using XDA Free mobile app
pirulazul said:
Oh, forgot one thing, rear camera is too dark but frontal camera is fine.
Click to expand...
Click to collapse
It has something to do with the lighting detection or some other initial initialization that I haven't figured out yet, but as a workaround if you toggle between camcorder mode and back it'll brighten up.
starlightknight said:
It has something to do with the lighting detection that I haven't figured out yet, but as a workaround if you toggle between camcorder mode and back it'll brighten up.
Click to expand...
Click to collapse
Tested and working fine. Is a nice workaround. I dont mind about this bug as I only use front camera for Skype and such things, but im glad this workaround is pretty easy and fast
Sent from my GT-I9300 using XDA Free mobile app
Hi Everyone,
I updated the original post with a new build. This build should fix the lighting issues with the rear camera the first time it is used. After I debugged the mode switching with logcat I was able to find out what the issue was. I also am working on reducing dependencies on vendor libs where possible by getting more of the modules that can be built from source building from source.
I've started exploring IR blaster support for NU users and I am continuing to look for a solution for bluetooth audio, but I don't have either yet. Stay tuned for future updates
If you already installed the ROM most times you should be able to flash over it, but if you see anything weird after, try wiping to confirm if its a bug or weirdness after upgrading (you can always nandroid before wiping if you're unsure and roll back if its not related to upgrading).
Please let me know if you find any issues. Include model number and if possible a logcat as well.
Enjoy!
Congrats starlightknight!
Anyone tried this on the SM-T530?
DISCLAIMER:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WARNING: KNOX GET VOIDED!
This rom is for J500FN model.I don't know if it does work on J500F or any other model. If you want to try, just remove assert lines in updater-script, BUT i'm not responsible if you brick your phone!
Is working on J500F model. Thank you @the-bomber for confirmation!
Read here to see how to remove assert lines: How to remove assert lines
Post #1 : Features, Download link, how to install the rom, credits.
Post #2 : Changelog, Bugs, to do list
Post #3 : FAQ/TIPS.
[QRCODE][/QRCODE]
INTRODUCTION:
Hello!
I'm Robert, an satisfied and happy user of the Samsung Galaxy J5 ( J500FN), but somehow bored of it since it doesn't have any custom rom or kernel, in few words, xda support. At begin, i was planning to build Cyanogenmod or AOSP and an custom kernel with minimal features, but i lack the knowledge to do it, but it's not impossible, just that i have alot of headache and i'm not that happy with that. I was also planning to do an custom rom too, with many features and many themes available, this is easier, but again alot of headache. I can't promise i would do these, but i may try again to make a better custom rom.
So, here is Stock ROM Advanced. It's just an simple rom, nothing more yet. Check out the features section for more informations.Screenshots attached ( switch XDA theme to 2013 or 2015 theme from bottom of page and click on Screenshots tab if you can't see them.
Please share this XDA thread since Galaxy J5 doesn't have it's own xda forum...
FEATURES:
- Based on firmware J500FNXXU1AOI1_J500FNDBT1AOI2_J500FNXXU1AOI1
- Pre-Rooted with SuperSU (v2.66)
- Busybox installed (v1.24.1-osm0sis)
- Zipaligned all system apps (for better utilization of RAM) - What mean this? <--- click
- Deodexed - What mean this? <--- click
- Debloated - removed some samsung apps and some other unecessary apps for more RAM, more internal memory available and less wakelocks (so more battery). More info about removed apps in post #2.
- Knox removed
- Faster boot & shutdown
- Faster than stock? You tell me
Click to expand...
Click to collapse
That's all the features it has now. Is just an custom rom based on stock rom, with some minimal changes, but improving the daily experience, at least for me. I can't promise, but maybe in future i will make it more than an simple rom, with more features. I repeat, can't promise it. I have decided to add more features in next version.
DOWNLOAD:
Stock_ROM_Advanced <<< click. Just mediafire link for now.
DO NOT MIRROR THE ROM. IF YOU WANT AN MIRROR, LET ME KNOW AND I WILL UPLOAD IT TO THE WEBSITE YOU WISH since i have good network! Thank you!
INSTALLATION:
(it's actually easy to install it, but i've wrote it this way because there may be new people to XDA which just wish the rom and doesn't want to bother by searching to how to do it)
1. Download the rom and put it on your External SD Card ( make sure you have enough space).
2. Download this TWRP recovery: TWRP recovery by @aapav01 - more info about this recovery at CREDITS
You can also use TWRP 3.0 by [MENTION]Nick Verse [/MENTION]which is fully working. Big thanks to him as well. If you didn't know yet, he also made a KERNEL for our J5
3. Download ODIN program. I'm using v3.09
4. Enable the OEM unlock bootloader option at developer options (if you can't see Developer Options, then go to Settings > About phone and tap 7 times build number).
5. Reboot your phone in download mode by keeping pressing Power button + home button + volume DOWN button at same time for few seconds. After an blue screen will appear, press volume up button.
6. Connect your phone with usb cable to your PC.
7. Open ODIN program and an number should appear at ID:COM. If it doesn't, then make sure that the phone usb drivers are installed.
8. Click on AP or PDA ( according to the version of odin which you downloaded) and choose the TWRP recovery you've downloaded and click START. Wait until the process finish.
9. Now go to TWRP recovery by keeping pressing Power button + home button + volume UP button at same time for few seconds.
10. Choose Wipe, then Advanced wipe and choose Dalvik Cache, System, Data and Cache and then Swipe to wipe.
11. Now choose Install and go to the place where you did put the ROM and choose it. Wait till installation finish and DON'T REBOOT YET.
12. Flash GAPPS. I use Open Gapps, ARM 5.1.1 pico version. http://opengapps.org/ . It's XDA thread is HERE .
13. Wipe dalvk cache & cache.
14. Reboot & WAIT 5-10 minutes until it boot!. Only first boot is longer. NOTE: When you reboot, if it ask you for SuperSU choose "do not install".
15. If you followed all the steps carefully, then everything will be OK. Enjoy
Click to expand...
Click to collapse
Flashing GAPPS is required because if you don't you will be stuck at setup wizard. This issue is probably caused by one of the removed apps. However, it won't cause any other problem. So, flashing GAPPS is a must right after you flash the rom, but you can remove them if you wish after you finish Setup Wizard.
CREDITS:
@SuperR. for his nice and useful kitchen.
@aapav01 for the TWRP recovery. Big thanks to him because without the recovery, you couldn't even flash the rom!
@osm0sis for busybox
@Chainfire for SuperSU
@Force me, for doing this small rom
Pressing the THANKS button does give me some satisfaction/motivation
XDA:DevDB Information
Stock ROM Advanced, ROM for all devices (see above for details)
Contributors
Force
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Lollipop 5.1.1 & TWRP ( knox get voided)
Based On: Official Stock ROM
Version Information
Status: Stable
Current Stable Version: 1
Stable Release Date: 2016-02-01
Created 2016-02-01
Last Updated 2016-07-25
Changelog
CHANGELOG:
Code:
v1.0 - Initial version
BUGS:
- WiFi. Two guys confirmed me that WiFi isn't working, but is working fine for me.
WIFI got working! Read HERE and HERE.
Flash LINARO KERNEL and WIFI will work. Thank you @Nick Verse for the kernel and @swistakkk1 for confirmation.
Maybe is not fully debloated, but i didn't have any issue after i've deleted these apps. i can remove even more to make the rom lighter, apps which doesn't suit for me, which some people would want them... I may add AROMA zip to let people choose what apps they want to remove.
/system/app deleted apps
/system/priv-app deleted apps
FAQ / TIPS
1. How do i install Xposed Framework?
Follow these steps: http://forum.xda-developers.com/showpost.php?p=64490530&postcount=2
This is a list of confirmed working modules until now:
Code:
- [URL="http://forum.xda-developers.com/xposed/modules/xprivacy-ultimate-android-privacy-app-t2320783"]XPrivacy[/URL]
- [URL="http://forum.xda-developers.com/xposed/modules/xposed-appopsxposed-appops-4-3-t2564865"]AppOpsXposed[/URL]
- [URL="http://forum.xda-developers.com/xposed/modules/app-bootmanager-t2432359"]Boot Manager[/URL]
- [URL="http://forum.xda-developers.com/xposed/modules/mod-obb-sd-v0-1-t2884004"]Obb on SD[/URL]
- APM+
- Gpm notification seek bar[L-M]
- ScreenOffAnimation
- Android Phone Vibrator
- Flat Style Bar Indicators
- Greenify
- NoSafeVolumeWarning
- Notification Manager
Thank you:
@22rp420 @nov01 for confirming some xposed modules!
If you know more xposed modules which are working on our phone, share with us!
2. My phone is running slow / has lag. Why?
My phone haven't lag or ran slow never and i'm using Power Saving mode all the time.
Use Greenify app to hibernate the apps which are running in background. Maybe you don't want Facebook or other apps running in background, eating RAM and battery while you use your phone or while your phone is in idle/standby. Then Greenify become useful. It does help gaining some more available RAM and also battery.
Also, don't use any Task killer because it is not necessary. It just does the opposite: make the phone run slow.
3. My battery drain too fast!
People use phone different. Everyone. My best SOT (screen on time) was 13 hours. Maybe you can or can't achieve that SOT. It all depends of how you use the phone.
The biggest battery drainer on Android are:
- Facebook app, facebook messenger
- Google Services
Greenify does help gaining battery too.
You should install BetterBatteryStats app to see what is draining your battery.
Personally, i'm using facebook in browser and i enable play services when i need them. I disable them with Tasker app by running some shell commands. Of course, you can do this with init.d too or some other apps. I will share the shell commands which i'm using later. I have maximum 10 minutes wakelocks in BetterBatteryStats widget and my battery doesn't drain even 1% per night.
FAQ/TIPS
reserved
It is absolutely fantastic to see fellow forum/country who have worked and learned a lot and return help to the community.
Big like to you @Force !
Razvan
Sorry @Force i may not be able test your work as i don't have access to my pc right now and don't know for how long but once i get time and access back i will firstly try your rom. But yes anyways thanks for the development.
@Force this ROM work on SM-J500H?
smk.mosharraf said:
@Force this ROM work on SM-J500H?
Click to expand...
Click to collapse
WARNING: KNOX GET VOIDED!
This rom is for J500FN model.I don't know if it does work on J500F or any other model. If you want to try, just remove assert lines in updater-script, BUT i'm not responsible if you brick your phone!
Click to expand...
Click to collapse
It was specified at the begin of the thread...
Wifi
@Force WiFi is not working i have reinstalled this rom a few times now and it still wont let me switch the wifi on i have even tried going back to stock and the wifi is still working fine there any suggestions
galaxysi9000freak said:
@Force WiFi is not working i have reinstalled this rom a few times now and it still wont let me switch the wifi on i have even tried going back to stock and the wifi is still working fine there any suggestions
Click to expand...
Click to collapse
Did you flash it on J500FN?
I haven't experienced this problem. I will look into this.
Are there more people who experienced this? Please let me know.
Force said:
Did you flash it on J500FN?
I haven't experienced this problem. I will look into this.
Are there more people who experienced this? Please let me know.
Click to expand...
Click to collapse
yes i did flash this on the j500FN
Wifi
Force said:
Did you flash it on J500FN?
I haven't experienced this problem. I will look into this.
Are there more people who experienced this? Please let me know.
Click to expand...
Click to collapse
Thank you for this rom, but Wifi doesn't work :crying:
galaxysi9000freak said:
@Force WiFi is not working i have reinstalled this rom a few times now and it still wont let me switch the wifi on i have even tried going back to stock and the wifi is still working fine there any suggestions
Click to expand...
Click to collapse
MAICK-LGG3 said:
Thank you for this rom, but Wifi doesn't work :crying:
Click to expand...
Click to collapse
I don't have any issue with the WiFi, but I think that the problem might be caused by WlanTest which I've removed it.
Later, I'll post here an flashable zip which does bring the WlanTest back and hopefully Wifi gets fixed.
Thank you both for reporting this!
Razvan said:
It is absolutely fantastic to see fellow forum/country who have worked and learned a lot and return help to the community.
Big like to you @Force !
Razvan
Click to expand...
Click to collapse
YES! Indeed!
@MAICK-LGG3 @galaxysi9000freak
I'm sorry for being late and also that i haven't made an flashable zip. I uploaded an zip file containing the WlanTest.apk.
1) Download WlanTest zip and extract the zip on your sdcard.
2) After you extracted the zip, you will have an folder named WlanTest and inside the folder WlanTest.apk. Use an file explorer with root and move the folder WlanTest to /system/app.
3) Set permission for the folder like this: http://i.imgur.com/gin3axj.png .
4) Set permission for WlanTest.apk from inside of folder like this: http://i.imgur.com/NXy772e.png .
5) Reboot
Let me know if this fix your wifi problems.
I was quite busy on working on the rom. Starting from next version, the rom will have a new name. It will also be themed, will have it's own logo and own bootanimation and more. Don't wanna spoil
I see that this thread has 600+ views already which is nice to see it
Doesn't work
Force said:
@MAICK-LGG3 @galaxysi9000freak
I'm sorry for being late and also that i haven't made an flashable zip. I uploaded an zip file containing the WlanTest.apk.
1) Download WlanTest zip and extract the zip on your sdcard.
2) After you extracted the zip, you will have an folder named WlanTest and inside the folder WlanTest.apk. Use an file explorer with root and move the folder WlanTest to /system/app.
3) Set permission for the folder like this: http://i.imgur.com/gin3axj.png .
4) Set permission for WlanTest.apk from inside of folder like this: http://i.imgur.com/NXy772e.png .
5) Reboot
Let me know if this fix your wifi problems.
I was quite busy on working on the rom. Starting from next version, the rom will have a new name. It will also be themed, will have it's own logo and own bootanimation and more. Don't wanna spoil
I see that this thread has 600+ views already which is nice to see it
Click to expand...
Click to collapse
Wlantest tested, doesn't work
MAICK-LGG3 said:
Wlantest tested, doesn't work
Click to expand...
Click to collapse
Can you take a logcat please?
How to take logcat
Start taking the logcat and then try to put wifi on. Also, try to wipe dalvik cache and cache in recovery.
Thank you!
MAICK-LGG3 said:
Wlantest tested, doesn't work
Click to expand...
Click to collapse
if @Force doesnt have wifi problem, you should download again the rom and flash it
could be a download problem and some files can be corupted.
i meet many times this "download isue" and was fixed in this mode
just try it! @Force you can test the uploaded package too.
Trimis de pe al meu SM-J500FN folosind Tapatalk
Force said:
Can you take a logcat please?
How to take logcat
Start taking the logcat and then try to put wifi on. Also, try to wipe dalvik cache and cache in recovery.
Thank you!
Click to expand...
Click to collapse
i have tested this and wifi is still not working i have a log
View attachment 3631908
thanks for the rom
confirmed working fine on J500F !
if u need any help i'll be happy to help you since i have themed and developed roms ...
i was lazy to work on a rom but since you started i'll help if u need any
thanks for the awesome rom !!
edit: WIFI isn't working !
LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOSdoes still include various hardware-specific code, which is also slowly being open-sourced anyway.
Important information:
This thread is for Unofficial LineageOS 13.0 builds for v2awifi (SM-T900). The following will not be supported here:
Custom kernels
Mods
Xposed
Do not ask for ETAs. If you do, I will ignore you and your post.
SEANDROID ERROR
If you see a message at boot about Recovery or Kernel is not SEANDROID Enforcing, you can ignore it. This is just telling you that you are not running Samsung stock software. It has no effect on recovery or the ROM itself nor related to either.
I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Modified system files
Bootloader Information
You need to make sure you have a Lollipop bootloader installed or else your device won't boot. Here you can go grab the latest bootloader and odin and flash it in download mode. Read all the steps before you do this.
Make sure you have a full backup because just in case you something fails.
Here are the steps to flash this via ODIN:
Make sure you have a full backup because just in case you something fails. Here are the steps to flash this via ODIN.
Reboot your tablet into download mode. Do this by first switching off the phone, then pressing and holding the volume down + home button together and then pressing the power button. Press volume up button to enter download mode.
Open ODIN on your computer. You?ll see the ID:COM box turning yellow with a COM port number upon successful connection with the tablet.
In ODIN click the BL button, select the bootloader firmware. It's a tar file.
Make sure Auto Reboot & F. Reset Time options are selected in ODIN
Click on the start button. When the process is completed your phone will reboot.
Installation
Download the zip(s)
Install a compatible Recovery (This will not work with the P900 recovery)
--1.*I have built a new version of TWRP with the MM kernel. MTP, Vibations, ADB now work and there are performance increases. The rom will need to allow v2awifi naming for flashing in recovery. Link
Perform a nandroid backup of your current ROM (optional)
Wipe data/factory reset
Flash LineageOS
Install the Google Apps addon package (Optional)
Reboot
Issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs or it didn't happen! You can use this: Syslog App
Downloads
Nightlies
Latest Nightly Date 12/23/16
Device Builds
Google Apps
http://opengapps.org/ - Thanks to the OpenGapps team!
Issues
Lower than stock audio volumes
MHL out to TV not working
The LineageOS team would like to thank everyone involved in helping with testing, coding, debugging, & documentation.
Source:
Kernel: Link
Device Tree: Link
Credits
@Valera1978 Initial device tree
@UpInTheAir for his kernel magic and misc fixes
@chhaggerty, @tbjr50 and @titidu3701 for their testing efforts
Exynos5420 Dev Team ( @deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah @joshndroid @Andmoreagain @thermskin, @javelinanddart )
XDA: DevDB Information
[6.0.x|SM-T900| Unofficial LineageOS 13.0 (v2awifi), ROM for the Samsung Galaxy Tab Pro 12.2
Version Information
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Status: Stable
Created 2016-10-01
Last Updated 2016 -12-23
Kernel Info:
M Kernel base from the Galaxy Tab S
M GPU driver from Galaxy Tab S
CPU Voltage Control
CPU OverClock/UnderClock (Up to 2.1GHZ)
MIF/INT Voltage Control
UKSM instead of KSM
Added the following IO Schedulers: fifo, fiops, sioplus, tripndroid, vr, zen, bfq (Default)
Full f2fs support updated off the mainline (Stock cm kernel has limited support)
Modified Thermal Throttling temperatures for all devices so hopefully they won't get as hot
Exynos thermal exposed to sysfs
Android Logger disabled by default can be enabled over sysfs
WQ power efficient workqueues (Still need to apply in more places)
Frandom Support
Readahead bumped to 256 from 128
Currently Disabled:
GPU Voltage Control/GPU OverClock/UnderClock (Needs to be rewritten for the M driver)
Awesome!
Thank you very much Tom!
Thank you! I would like to report that vibration isn't working. Other than that, everything works great.
c19932 said:
Thank you! I would like to report that vibration isn't working. Other than that, everything works great.
Click to expand...
Click to collapse
I will look into this. I am fairly confident I know what the fix is. Thanks for the feedback.
Hmmm...
I did wipe cache/dalvik cache/system and data with TWRP 2.8.7.0
and installed your cm-13.0-20161001-UNOFFICIAL-v2awifi.zip along with the open_gapps-arm-6.0-pico-20160925.zip (which I got as .ZIP for/from my Nexus 10)
After installing wiping cache/dalvik cache again and reboot system - but then after the SM-T900 Logo the screen is only blank.
No boot animation and no other sign that it will do something.
I could go to TWRP via Power+VolUp+Menue....
Do you got an Idea what went wrong?
[EDIT] also only the cm-13.0-20161001-UNOFFICIAL-v2awifi.zip without Open GApps gives me a black screen.
For now Iam back on CM 12.1 from the 09.07. and pico Open GApps from today.
Why was the SM-T900 files formerly named v2wifixx and now v2awifi? Could this be a problem for me?
guidol, try updating your bootloader, as per the OP.
TP, thanks much for your work on Tab/Note Pro 12.2.
gorgthetroll said:
guidol, try updating your bootloader, as per the OP.
TP, thanks much for your work on Tab/Note Pro 12.2.
Click to expand...
Click to collapse
How to do that? I have the same issue. Thnx
gorgthetroll said:
guidol, try updating your bootloader, as per the OP.
Click to expand...
Click to collapse
Thanks @gorgthetroll
Now it works - didnt read the part before the installtion carefully enough
@kutzman: read the part above the part of the installtion instruction:
Bootloader Information
You need to make sure you have a Lollipop bootloader installed or else your device won't boot.
I did this Bootloader-Part with Odin (Ok, on my device I has it to fo 2 times and 2 times it told me OK, but it did boot with a read Message about the Kernel in the 2nd try.
Now - after the seond try of the BootLoader-Flash my SM-T900 did boot - so I updated the TWRP via Flashify to the latest version (3.0.2.0) - but for that you have to enable root access in the developer options of CM13
thompatry said:
I will look into this. I am fairly confident I know what the fix is. Thanks for the feedback.
Click to expand...
Click to collapse
Does look great the first version of the CM13 for the SM-T900 :good:
Sadly I can confirm the missing vibration.
But as I did promise you - I donated another $30 for the "working" version of CM13 :laugh:
I hope this will encourage your development on the SM-T900-Builds! :angel:
guidol said:
Does look great the first version of the CM13 for the SM-T900 :good:
Sadly I can confirm the missing vibration.
But as I did promise you - I donated another $30 for the "working" version of CM13 :laugh:
I hope this will encourage your development on the SM-T900-Builds! :angel:
Click to expand...
Click to collapse
Thanks a lot to Guidol for being the most generous "facilitator", helping keep our great Tom in great spirit
Glad to see this rom!
Thank you for a working MM build for this amazing tablet, which I lost hope for any development. I appreciate all the hard work you put into getting this working!
I am having issues with the Play Store hanging at times and the File Manager not showing up properly and slowing down the device significantly
Getting a lot of issues regarding "Package Installer"
No Xposed installed*
Edit: tried multiple file managers from the Play Store and each have problems. No way to view files
Neekeet said:
Glad to see this rom!
Thank you for a working MM build for this amazing tablet, which I lost hope for any development. I appreciate all the hard work you put into getting this working!
I am having issues with the Play Store hanging at times and the File Manager not showing up properly and slowing down the device significantly
Getting a lot of issues regarding "Package Installer"
No Xposed installed*
Edit: tried multiple file managers from the Play Store and each have problems. No way to view files
Click to expand...
Click to collapse
Make sure you did a clean install, as mentioned in the OP's original message, and use an up-to-date OpenGapps package (for ARM, 6.0).
Thanks,
Eric
vochong said:
Make sure you did a clean install, as mentioned in the OP's original message, and use an up-to-date OpenGapps package (for ARM, 6.0).
Thanks,
Eric
Click to expand...
Click to collapse
Thanks for the reply
I have a clean installation and the exact same Gapps package installed.
Going to reflash and see keep an eye out for better results
Anyone else notice their tablet getting really hot? near the camera front and back.
Edit: Just reflashed using the Nano Gapps package and everything seems to be working great! will update if i run into anything. I had issues using the Pico version and wonder if that is suspect to the issues I was having. Any ideas?
Neekeet said:
Thanks for the reply
I have a clean installation and the exact same Gapps package installed.
Going to reflash and see keep an eye out for better results
Anyone else notice their tablet getting really hot? near the camera front and back.
Edit: Just reflashed using the Nano Gapps package and everything seems to be working great! will update if i run into anything. I had issues using the Pico version and wonder if that is suspect to the issues I was having. Any ideas?
Click to expand...
Click to collapse
Since the system partition in SM-T900 is quite large, I've always installed the STOCK package so it would remove most of the built-in stock/AOSP apps/tools and replace them with Google ones.
Also, with the STOCK package, I can still have access to useful Google apps even after a configuration reset, and without Google login (to download apps from Google PlayStore.)
Thanks,
Eric
Neekeet said:
Edit: tried multiple file managers from the Play Store and each have problems. No way to view files
Click to expand...
Click to collapse
I didnt got a problem with the EFS Explorer.
But for some access-methods you have to grant access-rights if the app/CM13 did ask.
And I got root-access enabled in the developer options.
---------- Post added at 06:25 PM ---------- Previous post was at 06:16 PM ----------
Neekeet said:
Edit: Just reflashed using the Nano Gapps package and everything seems to be working great! will update if i run into anything. I had issues using the Pico version and wonder if that is suspect to the issues I was having. Any ideas?
Click to expand...
Click to collapse
I didnt got any Problems with the pico Open GApps.
But you have to install something like GMail afterwards to get the actual Google/Playstore Services as Update.
After that I only do install the Google-Appsvthat I want.
Love this feature not having some odd G-Services in the Background or in the System-Partition.
(and I also use the pico on my Nexus 10 with CM13 because there is the /system only 800MB in size)
---------- Post added at 06:51 PM ---------- Previous post was at 06:25 PM ----------
Neekeet said:
Anyone else notice their tablet getting really hot? near the camera front and back.
Click to expand...
Click to collapse
on normal usage I didnt noticed the tablet being really hot.
Which apps do you use at this time? games with much graphics?
Tom did write about the voltage-selector of the gfx-card(?) that the voltage cant set down for underclocking or higher for overclocking....or somthing like this....moment I will copy the part...
"
Currently Disabled:
GPU Voltage Control/GPU OverClock/UnderClock (Needs to be rewritten for the M driver)
"
Dont know if your tablet will be hot about this disabled setting....
Everything is running fine now! thanks everyone
Love having MM on this tablet finally haha
Anyone's tablet feel a bit sluggish? it may be difficult to replicate but bringing down notifications seems to have some lag to it
Neekeet said:
Anyone's tablet feel a bit sluggish? it may be difficult to replicate but bringing down notifications seems to have some lag to it
Click to expand...
Click to collapse
for its fast as before with CM12....the Notifications werent for me the fastest ones....but Iam happy wirh this first build.
guidol said:
for its fast as before with CM12....the Notifications werent for me the fastest ones....but Iam happy wirh this first build.
Click to expand...
Click to collapse
Try to change the speed for windows animations, and the transition and animator duration. You can do that in developer options half way xown deist under drawing. Change the settings from window animation s ale, transition animation scale and animator duration scale from 1 to 0.5. See attached screenshot
pandoraman said:
Try to change the speed for windows animations, and the transition and animator duration. You can do that in developer options half way xown deist under drawing. Change the settings from window animation s ale, transition animation scale and animator duration scale from 1 to 0.5. See attached screenshot
Click to expand...
Click to collapse
I did try these settings - seems to be much better - many thanks
Hello, This is my first MOD which actually works.
Visit my new website here for detailed info: https://chetzjain1215.wixsite.com/enhancexp (currently the site isn't optimised for phones, but working on it. )
Code:
I am not responsible if you brick your devices or other issues because of my MOD.
Do some research or ask me if you have any concerns about it.
Q:So, What is this thing?
A: It basically Replaces stock LineageOS apps with the Google apps.
Q:Why do we need this?
A: If you're using Nova launcher or Pixel launcher i'm sure you would have come across ''force 3D touch". That thing doesn't take place in Stock lineage apps like Phone, Messaging or Clock etc. Also the UI of Calendar app isn't good as compare to Google calendar app, however Google apps is the solution.
Q:What else does it do?
A: It will install Sony Music player (Beta version), trust me it isn't bloatware but something better than Eleven (stock lineage music player), also it adds a nice unlock sound effect.
Features: 1) Removes Lineage apps: Calendar, Clock, Eleven, Calculator, Messaging, Contacts and Phone.
2) Adds Google apps of: Calendar, Clock, Calculator, Messaging, Contacts and Phone, Beta version of Sony Music.
3) Unlock Sound effect from MIUI.
**CAUTION**: I've tested the MOD only with Official RR 5.8.3 and with NANO open gapps package.
THINGS YOU SHOULD DO AFTER INSTALLING: 1) Set Phone as default app by going in Settings>Apps>Setting icon (Top right corner), under default, select Phone app. That's it.
**Installation For recovery flashing***
1) Flash your Favourite (7.1.1/7.1.2) ROM and then flash Nano Gapps.
2) Go back in TWRP and select "MOUNT" and tick system.
3) Select my MOD and flash and reboot.
**Installation For recovery flashing***
1) Take a backup seriously.
2) Open magisk and select my module and flash it.
Download for Stable Recovery Flashing: STABLE VERSIONS
Download for Beta Recovery Flashing: BETA VERSIONS
Download for Magisk flashing: not supported anymore
Source: Github
Credits :LineageOS
: @nicesoni_ash
:Google
:Me
(download the zip file which has high number, if possible.)
Current Version-
Stable: V16.0
Beta: V15.1
Some screenshots!
Changelogs:
To See older version of changelogs, Visit here! Older Changelogs
*For Mod*
V16.0
-
1) Fixed Clean and Dirty flash option.
2) Updated apps. (Phone, Calendar)
3) Updated Sony Music to latest beta.
4) Selecting Dirty flash will redirect you on installation.
5) Selecting Clean flash will be normal as before. (Delete apps and then installation)
6) Used Flux font.
7) Fetch system information and shows you.
8) It will show you what cpu you running, and warning above.
9) Align many texts.
10) Added option whether you want bubble patched dialer in MISC
11) Updated Changelog and Credits txt
12) Used new icons for clean and dirty flash option
13) Remove conflicting lines during installation
14) It will show the app version no.
15) Done many underhood changes
16) some small text and other fixes.
Bugs: so far none
#Enjoy!
Please consider reading some frequently asked questions before flashing it.
FAQS
look nice. btw what icon pack is that in the screenshot?
keaheng said:
look nice. btw what icon pack is that in the screenshot?
Click to expand...
Click to collapse
Thank you! and this one
Update the site for mobile, still there are many problems with it. Like slideshow and other problems like unable to see some texts in last pic. And update coming soon
New Update is up. https://www.androidfilehost.com/?fid=673368273298951161
If anyone here facing issue like phone app unable to see in app drawer, then it means you probably have dirty flash my new version of mod over old one. In order to remove this issue, either do clean flash or open root browser go in system/priv-app/GoogleDialer and remove the older version, it's something with ''8.0.1...'' and reboot
New stuff coming, tested well before implementing.
New update: https://www.androidfilehost.com/?fid=745425885120732628
So i finally "tried" to make git, i'm still new so dunno know much stuffs. but you can check the mod git here: https://github.com/chetz1215/Enhance-Experience-Global
I was not able to upload systen folder cause of bad internet connection but will do once it's stable
Nice work ? i will give feedback when i try it
Only for OP3T or other devices can try as well ?
ProudRed said:
Only for OP3T or other devices can try as well ?
Click to expand...
Click to collapse
For everyone
Some new stuffs may come soon, like mounting automatically and some apps from android O dev preview.
Clock app crashed. BTW i'm on sultan linage rom
Noob02 said:
Clock app crashed. BTW i'm on sultan linage rom
Click to expand...
Click to collapse
Please specify more, is it your first time you installed this mod? If you have flashed my mod before too, either do clean flash or go in system/app and search for related words to clock, there must be conflicting apps.
Clean cache n force stop.. now work well. Thanks ,bro?
New Update https://www.androidfilehost.com/?fid=961840155545575989
Hi guys,
I've developed my personal custom rom. Italian people can read this article instead of this one.
These are all the features (I hope to remember all of them ) :
- based on CherrugKernel
- OTA updates for rom and kernel too
- Removed all chinese stuffs
- Gapps included
- Rooted with magisk 16.0
- Build.prop tweaks
- Increased volume step to 45
- Added support to su.d
- Better doze
- Better ram managment by crok
- Camera API 2 enabled
- Ads block integrated
- Face unlock support
- Google lens enabled
- Bigger space for Google photos' drive
- Developer options pre-activated
- Removed some futile voices in settings
- Removed some unused lib
- Busybox included
Tips:
1) For any problem with notifications open the dialer and call *#*#46360000#*#*. Disable the last voice of menu that will appears. Go to Settings.apk -> Battery -> Smart battery for apps and select all the apps of wich you want to receive notification. Now come back and select Align Wake-up and disable Align Wake-up voice. Now come back to the first Settings.apk page and select Permissions. Go to "You have allowed x apps to auto launch" voice and choose the same apps you have choose in smart battery menu. Done
2) Choose USA region to remove yellowpage's tab in phone and contacts and allow icons in notifications.
3) To enable Face recognition go to Settings.apk -> Security centre and set a screen lock. Now go to Smart Lock, insert your pattern/code/password and choose Trusted face then SET-UP, NEXT and memorize your face. To better unlock your phone memorize your face in different light's conditions.
4) For problem with camera go in camera's settings, scroll down to Use Camera2 API and enable it.
5) To pass CTS Profile in Magisk boot one time then use the universalsafetynetfix in download.
6) If u have problem with OTA updater clear app's download history, force close it, clear app's data and then reopen it.
The rom has been tested on my x829 6/128Gb and a x820 6/64Gb too. I granted that it's stable but I'm not responsible for any problems to your phone. Flash at your own risk.
How to install?
I advice to do a complete clean install. To do this go to twrp -> wipe -> advanced wipe -> select cache,dalvik,system,data and internal storage. First time I do also format data but isn't necessary. Now go to Advanced -> Adb sideload and check all the voices. Download rom's zip on pc. Now go to adb and fastboot drivers' folder and click right mouse's button + shift on an empty part of the folder. Choose open command line here or something like that from showed menu. Now write adb sideload and drag rom's zip on the window. For Windows 10 put ./ before adb command. On the phone do swipe. Wait some seconds and push enter on pc. If you're italian and want to install by conventional mode check this.
Andoidfilehost mirror
Andoidfilehost mirror NoGapps' Rom Alpha
This is a version without Gapps. I replace Google package installer with stock one, root browser with es file explorer, removed Truecaller and put in Opera Touch to allow u download your prefered apk. Maybe Pi Music Player will crash due Google play services dependence. I called it Alpha because I don't have tested it yet, let me know for any problem.
Telegram group
If you could join the group and partecipate to future update for the rom with your feedback, your advice, sharing logs, screen shoots the entire community will thanks u. :good:
CherrugRom, ROM for the LeEco Le Max 2
Contributors
- CherrugDeveloper
- @Lucchetto00, to help me with kernel and some stuffs
- CornFlaix, for the logo
- @arielaco, for the great help for toggles and so on
- @mauronofrio, for universalsafetynetfix
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.x
Version Information
Status: Beta
Current Beta Version: v1.0
Beta Release Date: 2018-05-30
Created 2018-05-30
Last Updated 2018-05-30
Thanks for tour ROM. It is based on EUi5
Enviado desde mi LEX820 mediante Tapatalk
yes it is based on eui 5.9.028s
AFH link not correct is this one
https://androidfilehost.com/?fid=818222786056033733
i install this rom
fast
ram managment is good
Camera good
ringing volume clear and loud
fingerprint is good
face unlock not working FC
battery draining fast
slow internet
4g/volte unstable
Thnax for this Rom keep doing best things
Best of luck bro:good:
face unlock FC
Can you download matlog and send me the error please? Do u have done a clean installation?
CherrugDeveloper said:
Can you download matlog and send me the error please? Do u have done a clean installation?
Click to expand...
Click to collapse
yup clean install.. how get matlog?
From the store. Is an app which show you logcat. Grant superuser permission and set errors only, after that run face unlock and send me the log.
Link works for me and there are 25 downloads so for the others too
CherrugDeveloper said:
From the store. Is an app which show you logcat. Grant superuser permission and set errors only, after that run face unlock and send me the log.
Click to expand...
Click to collapse
I get this file bro... hope so is it right?
please made telegrame group for discussion
Great idea I forget to do it ahahahah I'm so busy today and tomorrow too
The log is strange I don't know if you have pick it right way but it seems to be a libs' error. First try do delete data to facelock app and after reboot in recovery and wipe cache and dalvik. Try again and let us know. Thank you for your time
CherrugDeveloper said:
The log is strange I don't know if you have pick it right way but it seems to be a libs' error. First try do delete data to facelock app and after reboot in recovery and wipe cache and dalvik. Try again and let us know. Thank you for your time
Click to expand...
Click to collapse
sorry bro not working
fromjeet said:
sorry bro not working
Click to expand...
Click to collapse
I will try to make a zip for you maybe tomorrow. I added telegram group's link on thread.
Can u also look if smart locks are activated under security center -> other security options -> trusted agents?
I've uploaded an OTA update for kernel. I hope new profiles will drain less battery. Waiting yours feedbacks
CherrugDeveloper said:
I've uploaded an OTA update for kernel. I hope new profiles will drain less battery. Waiting yours feedbacks
Click to expand...
Click to collapse
Ok I will try
fromjeet said:
Ok I will try
Click to expand...
Click to collapse
Jeet have u verified smart agents?