Galaxy Note 4 Unbrick/Debrick.img for N910G/F/T/W8 [unbrick] [unbrick image] - Galaxy Note 4 Android Development (Snapdragon)

First of all,
I would like to thank @Trex888 , for providing the debrick creator .
A special thanks to @dyasten for providing a working method of debricking n910f .
NOTE: DEBRICK IMAGES ARE AVAILABLE FOR N910G/F, IF YOU HAVE N910W8/T, SEE THE REFERENCE SECTION BELOW.
************************************************
●Read this before proceeding any further.
>Please mention your model number while posting a query.
>Before trying any of these methods, load your note 4 in a bag and put it in the freezer (not kidding, i am serious).
>Keep it for a whole night, before removing it from freezer, these things should be ready:
○ Recovery firmware or stock rom loaded in odin, with every file in its respective slot, if you are using the recovery firmware, then uncheck auto reboot and tick f.reset time, repartition in odin's option tab.
My advice is, try to flash the stock rom first, if it doesnt works, then go for recovery firmware.
>Once you remove it from freezer, without any delay, connect it to pc and flash the firmware.
DEBRICKS:
■N910G:
http://forum.xda-developers.com/showthread.php?p=70006957
■N910F:
http://forum.xda-developers.com/showthread.php?p=69489251
●This is the procedure:
-Open win32diskimager, load the debrick.img(3.74gb for n910f and 16mb for n910g).
-Flash it on a blank sd card, the card should be completely formatted and should be in fat32 format.
[/B ]-Once done, put that sd card in your bricked device.
-Connect it to your pc.
-Hold the power button for at least 10 sec or try the download mode key trio.
-It should vibrate.
-If it doesnt, hold it in front of an air conditioner,
let it cool( this has been tested).
-If it still doesnt vibrates, remove the battery, hold the power button for 10sec and then insert the battery.
-Now again try to press power button.
>So, once it vibrates, leave it for around 5min.
-Then press the volume down key+power+home.
-It should boot in to download mode.
-Now you can flash stock rom or recovery firmware.
RECOVERY FIRMWARES:
■N910G:
https://www.androidfilehost.com/?fid=24411628330025773
■N910F:
go to note4/511 and download each and every file except for the one named as apq8084.pit :
https://mega.nz/#F!QIMmFRIT!Ns3AM-n0FUoMqOOWUif9ng
or
http://www.tsar3000.com/Joomla/inde...note-4- firmwares&catid=55:samsung&Itemid=82
■N910W8:
https://drive.google.com/file/d/0B9ScTYYICtERZkVhcXhCWWl1VHM/view?usp=sharing
●The correct way of flashing a recovery firmware:
- Load all the files in their respective slots ( ap, bl, cp, csc, pit ).
- select f.reset time, re-partition and uncheck auto reboot.
- Flash
- If it fails, then try without csc.
-Done
-Your phone will be back to normal.
● Incase if any hardware buttons are not working, you can use this tool to get into download mode:
https://mega.nz/#!il9XXS6a!6yXq6uCBYpWzG0PLeAXhNpGqRZRmp4Oj3cRnTvNDPao
Turn your phone off, connect it to pc and put it in download mode via that software.
You dont even have to read any further unless you have a different variant of note 4.
If the device still acts weird, then refer this:
https://forum.xda-developers.com/showthread.php?p=70971598
Dont forget to press thanks.
****************************************************
REFERENCE:
If you are in a hurry to debrick your note 4 ,then go to these link, without reading any further, but don't forget to press thanks button :
■N910F:
http://forum.xda-developers.com/showthread.php?p=69489251
Or else:
People with bricked N910F can refer this page :
pastebin (dot) com/7KQxRRNF ,
just replace "(dot)" with " . "
■N910G users can try this :
http://forum.xda-developers.com/showthread.php?p=70006957
■N910W8:
https://mega.nz/#!TM8FUKrL!2tX2hrk3Oakxydw0GlkcXRkw7F3Oq6AHRlPPqGgtcPU ( by @Valentinez).
■For N910P refer this thread:
http://forum.xda-developers.com/showthread.php?t=3525923
■For n910t:
https://mega.nz/#!XRE1DbRL!uRcj8knB4QNV85QUDbXQe_9GLxrdcTYJC_DxNoyXkAA
Follow these steps for unbricking your device:
http://forum.xda-developers.com/showthread.php?p=69481229
************************************************
Here are qualcomm drivers , install them on pc :
https://mega.nz/#!4lNliRYJ!3blyZgKugEcdztDfyCjz_jrg_l4nO2UjUIckEFhMRks
************************************************
METHOD TO CREATE A DEBRICK VIA ODIN:
>PREREQUISITES:
-APQ 8084.pit file ( get it from here: https://mega.nz/#F!GscxXTgL!vBFl9ovSxsHM3xNo2jK40w)
-a Bootloader of your device(use the one from your recovery firmware)
-Any Samsung device having download mode.
-A SDHC CLASS 10 micro SD card(4gb, 16gb), it should blank and in FAT32 format.
- ODIN.
>PROCEDURE:
-Load the APQ 8084.pit file in the PIT section of ODIN.
-Load the Bootloader file in BL section of ODIN.
-In the options tab select: Auto Reboot, Re-Partition, F.Reset Time and T flash.
- Insert the blank sd card in a Samsung device and put the phone in Download mode.
-Connect the device to PC.
-Press START in ODIN.
That's it, you have your own debrick sd card, now you just have to insert it in your bricked device
************************************************
Reportedly , working on N910G and N910F.
Trex888 has already created a Debrick.img for n910t , hope all the other variants also get it.
Thanks to @Kurisoft , for sharing information about creating a debrick.img.
Don't forget to Press thanks .
Paypal ID: https://www.paypal.me/yashthemw
Reporting Via N910G

---

Check pm
yashthemw said:
First of all, I would like to thanks @Trex888 , for providing the debrick creator .
Note : If you want the debrick img , then you will have to make one for yourself.
I will be doing it for n910g , it will take some time, cause i will need a spare note 4 .
Anyways , if you want , create it and share .
Procedure :
So basically , you have to flash this zip file in recovery :
https://mega.nz/#!fJlWwawA!tsRI-0DMFyMcw8SVP1b7_nTyLK6xjiLzS6l1eZcJzxM
As stated by trex888 , this will create a file named Debrick.img in your internal storage .
Then you will have to put that debrick.img file on a sd-card(it should SDHC and I would advice a 32gb card ).
This can be done through PC , by using win32diskimager .
You can download win32diskimager from here :
http://forum.xda-developers.com/attachment.php?attachmentid=2598667&d=1393277797 )
Before putting this file on sd-card , make sure that it is formatted.
Once you got the file on your sd-card , just insert it into your costly paper weight (bricked note 4) .
Try to enter the download mode with the three key combination, if it doesnt enters the download mode, try all the possible key combinations .
Hope it helps .
Trex888 has already created a Debrick.img for n910t , hope all the other variants also get it.
Thanks to @Kurisoft , for sharing this information .
Reporting Via N910G
Click to expand...
Click to collapse
Check pm

---

Debrick.img for n910g and n910f created .
I dont have a bricked note 4 , therefore someone with a bricked device will have to try.
I have created it for g and f , with my functional note 4 , so please press thanks.
Reporting Via N910G

---

Great

---

N910f users , please report
Reporting Via N910G

---

Can i flash this file for Note4 N9100 dual sim ?

---

hochocnua said:
Can i flash this file for Note4 N9100 dual sim ?
Click to expand...
Click to collapse
No , ask some n9100 user with a functional n9100 to create a debrick.img.
Reporting Via N910G

---

yashthemw said:
No , ask some n9100 user with a functional n9100 to create a debrick.img.
Reporting Via N910G
Click to expand...
Click to collapse
I mean flash tool with TWRP
https://mega.nz/#!bBU1RDwB!tsRI-0DMFyMcw8SVP1b7_nTyLK6xjiLzS6l1eZcJzxM
And it creative the img file for N9100 of me ?

---

hochocnua said:
I mean flash tool with TWRP
https://mega.nz/#!bBU1RDwB!tsRI-0DMFyMcw8SVP1b7_nTyLK6xjiLzS6l1eZcJzxM
And it creative the img file for N9100 of me ?
Click to expand...
Click to collapse
Yes , for all n9100.
Reporting Via N910G

---

Question. When I create a Debrick.img I must first stock Fimware Flashen or does it go during Costom Rom?

---

rakieta said:
Question. When I create a Debrick.img I must first stock Fimware Flashen or does it go during Costom Rom?
Click to expand...
Click to collapse
If you want to create a debrick.img , then you have to be on a stock rooted firmware .
But why are you making one more ,
I have already made one .
Try it and report here.
Sent from my SM-N910G using Tapatalk

---

Thanks, hopefully I'll never need it but reassuring to know.

---

yashthemw said:
If you want to create a debrick.img , then you have to be on a stock rooted firmware .
But why are you making one more ,
I have already made one .
Try it and report here.
Sent from my SM-N910G using Tapatalk
Click to expand...
Click to collapse
Because my device is N910F and your image. Is N910G. Or does it not matter? I can not test it at the moment because my cell phone is not bricked, but be prepared is good

---

rakieta said:
Because my device is N910F and your image. Is N910G. Or does it not matter? I can not test it at the moment because my cell phone is not bricked, but be prepared is good
Click to expand...
Click to collapse
No one has tested it yet on n910f , but if your n910f gets bricked (hope it doesnt) , then you can try your luck .
Reporting Via N910G

---

can you get me a dude with an AT&T note 4?
i know what i am doing

---

AlexanderDAB said:
can you get me a dude with an AT&T note 4?
i know what i am doing
Click to expand...
Click to collapse
Check in the at&t developement section , you will find many .
Reporting Via N910G

---

yashthemw said:
N910f users , please report
Click to expand...
Click to collapse
debrick.img for N910F not working. The phone does not even begin to read SDcard

---

Sedy said:
debrick.img for N910F not working. The phone does not even begin to read SDcard
Click to expand...
Click to collapse
Sad to know .
I hope , you followed the correct steps .
Anyways thanks for reporting .
If you know a functional n910f user , then ask him to create a debrick.img for F variant.
It wont brick his device .
I would have done it , but i have n910g .
The only requirement for creating debrick.img, is to be on a stock rooted firmware.
Reporting Via N910G

---

Try to install these qualcomm drivers :
https://mega.nz/#!4lNliRYJ!3blyZgKugEcdztDfyCjz_jrg_l4nO2UjUIckEFhMRks
Thanks to @Kurisoft 's thread.
Reporting Via N910G

---

Try this another unbrick.img :
https://mega.nz/#!Io8UgJoA!qZBjc2ELzHGkUoDCfoCihat1iUh648UZwZb55Kc1k2o .
Same steps , put it on sd card via win32diskimager.
Reporting Via N910G