Related
Looks like I got one dot on the middle right side, tiny specks on the top right side, and a few more on the top. I also got some light leakage, but that's very, very minor compared to the dust under the screen. I'm kinda OCD about this, so I'm thinking of getting an exchange at Bestbuy..
What about you folks?
You sure its not dead pixels. Anyways, if it bothers you return it. its about customer satisfaction. So what if they look at you strange, you'll be happier and anyways, who cares about them.
Damn why can't HTC get this right! It seems every new HTC phone gets dust under the screen.
Yeah. Hopefully my new TPU case that's coming will block a lot of the incoming dust after my exchange.
I'm having some other problems as well, preferably with 3D youtube videos not playing in 3D. :/
I was thinking about getting the Otterbox Defender but I decided not to because of the size of it, But now I think I'm gonna get it because it will totally keep dust from getting under the screen.
I havent had this issue myself since the Hero, but it was most definitely annoying. It got so bad that I was tempted to just spray the phone with aerosol lol
Every HTC phone I have had has screen lifting issues. When you get a new htc phone press around the screen. If you hear any popping sounds the screen is strarting to left and will get dust under it. I use a hair dryer and get the screen really hot. Then press the screen down for 3 to 5 mins. This will help seal the screen and will keep dust out of your new phone. There can be dust under the screen from poor manaurfatioring proccess so inspect your new phone then use the hair dryer trick before it gets dust under the screen.
Yeah I got a damn spec of dust stuck inside my camera lens too... good thing its off to the side edge but yeh that urrrks!
Jeremiah239 said:
I was thinking about getting the Otterbox Defender but I decided not to because of the size of it, But now I think I'm gonna get it because it will totally keep dust from getting under the screen.
Click to expand...
Click to collapse
I got the otterbox commuter case and it is wonderful. It is like silicone so it isn't slick and it doesn't add a lot of mass to the phone. It will still go in your pocket easily.
Mine had dust too. Exchanged it as soon as I noticed it.
Sent from my PG86100 using XDA Premium App
I literally just watched a piece of dust get stuck under the screen when I was wiping it off. It wasn't there, then a moment later it was. This is in addition to 3-4 other specs I just noticed today. I think I may go into the Sprint store this weekend and exchange it. Has anyone had any trouble exchanging it for dust issues?
I just noticed 2 specs of dust near the charging port, very annoying. I had this issue with the Hero as well...got about 3 replacements, and they all eventually got dust under them.
Anyone have an issue exchanging their phone with this issue? I got mine at Best Buy, so they better take it back.
I got mine at Best Buy as well. Just make some stuff up like the buttons feels loose and the battery will drain randomly at times.
Why, is dust under the screen not a valid reason to return it? It shouldn't happen.
You guys should put a piece of tape over the headset jack when not in use. Most dust comes in through that jack.
ronnienyc said:
You guys should put a piece of tape over the headset jack when not in use. Most dust comes in through that jack.
Click to expand...
Click to collapse
I think the dust is coming in from the sides of the screen because its not sealed good
For those of you that have dust, did you exchange it for a new phone?
ronnienyc said:
You guys should put a piece of tape over the headset jack when not in use. Most dust comes in through that jack.
Click to expand...
Click to collapse
Why the eff should somebody have to do this to any phone let alone a brand new phone? If you have to do that then its not built right.
True, but it works.
Lol, I am not putting tape on my headset jack.
It looks like mine came in through the charger port
Hi all,
Ok, so i've had a small disaster. As you probably guessed already i've dropped my phone. I thought the story was quite amusing (or just plain unfortunate!) so i'll you tell that before I ask for some advice!!
I got myself a white Galaxy S2 on upgrade through Vodafone. Gorgeous piece of kit so I ordered myself a nice case and screen protector to keep it nice and tidy.
Unfortunately the case got 'lost in the post' and as such the phone was unprotected. So, with some foresight I ordered a plain white cheap one off eBay (£2 inc. postage) just to see me through the 3-5 days I needed before the case I wanted was resent.
However what was sent what not white at all - it was the most hideous case with a rather disgusting floral effect all over it. I was going out for a night in town and had no choice, I had to take it with me.
Unfortunately later that eve I was stood at the bar, and my phone went off. So to save any embarrassment I slid the phone out of it's hideous case, and proceeded to read the message. Then it happened. The slippery son of a ***** jumped out of my hand, bounced off my foot and hit the deck.
It only has a couple of dings in the chrome bezel (the chrome effect rubbed off in two places to reveal black (the plating is obviously really thin)) - everything else was ok. Phew. But i'm still gutted and annoyed with myself
So, lesson learnt. I should have left the disgusting garish floral case on and it would have saved my phone. It was only 'de-sheathed' for a second and I managed to drop it, classic.
As a temporary solution, I coloured in the affected areas of the bezel with a silver permanent marker, and used some clear nail varnish over the top to stop the pen coming off. It seems to work well actually, and it looks much better than the black marks.
So, to my question - how do I change the chrome bezel for a new one?
I have read many threads, and watched many videos, and it looks to me like a nightmare job (eg as well as taking off the back and all components, you have to prise off the screen which is glued on, disconnect digitiser, etc). Can anyone confirm this, or has anyone tried it?
I can't find any videos of changing the bezel - they all seem to only go as far as taking off the back.
I've found a couple of sellers which sell the housing in white for only £20-30, so if it's an easy-ish job i'd have a stab at it. However i'm thinking I might as well just forget it ever happened and not be so precious about keeping the phone in A1 condition - it's a phone after all and it's going to encounter some scrapes now and then, even with a case on. And I plan on keeping it for 18 months anyway.
Opinions, anyone?
Cheers!
Movisman said:
Hi all,
Ok, so i've had a small disaster. As you probably guessed already i've dropped my phone. I thought the story was quite amusing (or just plain unfortunate!) so i'll you tell that before I ask for some advice!!
I got myself a white Galaxy S2 on upgrade through Vodafone. Gorgeous piece of kit so I ordered myself a nice case and screen protector to keep it nice and tidy.
Unfortunately the case got 'lost in the post' and as such the phone was unprotected. So, with some foresight I ordered a plain white cheap one off eBay (£2 inc. postage) just to see me through the 3-5 days I needed before the case I wanted was resent.
However what was sent what not white at all - it was the most hideous case with a rather disgusting floral effect all over it. I was going out for a night in town and had no choice, I had to take it with me.
Unfortunately later that eve I was stood at the bar, and my phone went off. So to save any embarrassment I slid the phone out of it's hideous case, and proceeded to read the message. Then it happened. The slippery son of a ***** jumped out of my hand, bounced off my foot and hit the deck.
It only has a couple of dings in the chrome bezel (the chrome effect rubbed off in two places to reveal black (the plating is obviously really thin)) - everything else was ok. Phew. But i'm still gutted and annoyed with myself
So, lesson learnt. I should have left the disgusting garish floral case on and it would have saved my phone. It was only 'de-sheathed' for a second and I managed to drop it, classic.
As a temporary solution, I coloured in the affected areas of the bezel with a silver permanent marker, and used some clear nail varnish over the top to stop the pen coming off. It seems to work well actually, and it looks much better than the black marks.
So, to my question - how do I change the chrome bezel for a new one?
I have read many threads, and watched many videos, and it looks to me like a nightmare job (eg as well as taking off the back and all components, you have to prise off the screen which is glued on, disconnect digitiser, etc). Can anyone confirm this, or has anyone tried it?
I can't find any videos of changing the bezel - they all seem to only go as far as taking off the back.
I've found a couple of sellers which sell the housing in white for only £20-30, so if it's an easy-ish job i'd have a stab at it. However i'm thinking I might as well just forget it ever happened and not be so precious about keeping the phone in A1 condition - it's a phone after all and it's going to encounter some scrapes now and then, even with a case on. And I plan on keeping it for 18 months anyway.
Opinions, anyone?
Cheers!
Click to expand...
Click to collapse
Sorry to hear...similar happened to my HTC Desire...however this should help...if you buy the kit off Ebay...
http://forum.xda-developers.com/showthread.php?t=1253969
0semaj0 said:
Sorry to hear...similar happened to my HTC Desire...however this should help...if you buy the kit off Ebay...
http://forum.xda-developers.com/showthread.php?t=1253969
Click to expand...
Click to collapse
Hi,
Thanks for the information - I had a look at this tutorial yesterday, and although it's very good, it looks like this person has replaced the entire led panel/digitiser/housing in one go, rather than just the housing?
My screen is just fine, so I only need to replace the housing part.
The hardest bit looks like separating the screen from the housing from what i've read, and this is what I can't find a tutorial for, only some images on youtube suggesting to use a hairdryer to help with the proceedings!!
Thanks
Movisman said:
Hi,
Thanks for the information - I had a look at this tutorial yesterday, and although it's very good, it looks like this person has replaced the entire led panel/digitiser/housing in one go, rather than just the housing?
My screen is just fine, so I only need to replace the housing part.
The hardest bit looks like separating the screen from the housing from what i've read, and this is what I can't find a tutorial for, only some images on youtube suggesting to use a hairdryer to help with the proceedings!!
Thanks
Click to expand...
Click to collapse
Yea, the link is for the whole unit, but would give you some pointers. I am not as familar with the Samsung build, but with the HTC I know that between the LCD housing and the LCD/digitiser itself is applied through adhesive (most phones are) that is put into a temperature oven for 10 minutes to soften the adhesive. This is based on the HTC Official Service videos. I am not sure if the same will apply to Samsung phones.
But then again, as it is an expensive phone, it may be ideal for you to also get a quote from your local SSC or mobile phone repair agent to consider.
0semaj0 said:
Yea, the link is for the whole unit, but would give you some pointers. I am not as familar with the Samsung build, but with the HTC I know that between the LCD housing and the LCD/digitiser itself is applied through adhesive (most phones are) that is put into a temperature oven for 10 minutes to soften the adhesive. This is based on the HTC Official Service videos. I am not sure if the same will apply to Samsung phones.
But then again, as it is an expensive phone, it may be ideal for you to also get a quote from your local SSC or mobile phone repair agent to consider.
Click to expand...
Click to collapse
Yep, good point. I'd be interested to hear actually what the cost would be to replace the front bezel only. It's only £30 on eBay for the front and rear housing, but i'd be willing to pay more on top for an authorised repairer to carry out the job.
That tutorial is definitely one of the more detailed ones I have seen so far though. Doesn't look like many people have tackled changing the bezel only...
Thanks
Movisman said:
Yep, good point. I'd be interested to hear actually what the cost would be to replace the front bezel only. It's only £30 on eBay for the front and rear housing, but i'd be willing to pay more on top for an authorised repairer to carry out the job.
That tutorial is definitely one of the more detailed ones I have seen so far though. Doesn't look like many people have tackled changing the bezel only...
Thanks
Click to expand...
Click to collapse
Hey Movis,
What did you end up doing for your dropped phone?
I too have dropped my phone on its corner and the chrome along with the plastic is now dented.
Another one with the same problem here. I managed to create a bump on the chrome bezel.
Can I bump this post as I've also just noticed a ding in the corner of the chrome bezel was wondering if anyone had found a solution to this yet.? short of replacing the LCD/digitiser which like OPs phone are working fine. It's just cosmetic damage.
I once was in a bad mood and snapped a screen and backing/housing in half.I can't remember exactly,but I'm thinking the chrome bit may be part of the thin metal casing/housing that is glue taped onto the screen.
You separate the screen from the housing by using a hot air gun sparingly.
If you look back at a motherboard thread I was involved in,a person on here called Roger put up a great video tutorial link that may answer all your questions...
Sent from my GT-I9100
Ah cheers for the reply. Had a look at the mobo post you were involved in followed it to the link and coincidentally that's the exact video I watched last night. Very good video good detail and instructions. But its the black one he is stripping down so he makes no reference to the bezel which afaik is only used on the white ones.
Sent from my GT-I9100 using xda premium
I've not seen the chrome bit listed separately,so I guess its part of the metal top housing that the LCD is glued to.I've got a white one and its got a ding on it too.
You could email Samsung to see if you can get the part,but I think its not worth risking cracking the screen and you probably couldn't resuse / would get that stupid gluey tape stuff.
Sent from my GT-I9100
Appreciate it's been a while, but this seems to be the only post that matches what happened to me, so figured I'd update with my experience.
As above, dropped and dented the bezel, screen was perfectly intact, but the dent was so severe, it actually lifted a corner of my screen up. I have intentions to sell on so I wanted to fix this and pass on.
I followed this disassembly , apart from the bit about not worrying about damaging the screen as you prise it away. The housing I ordered off ebay came with a little kit, so I warmed the screen with hairdryer for a couple of minutes, then slowly prised it away, from top to bottom, inserting the tool right down the middle as the video mentions there is a large adhesive right down the middle.
Following the vid all the way to the removal of all components, this is where I ditched my current bezel/housing and reassembled into the newly ordered one. Judging by the assembly, there is no way that a bezel could be replaced without replacing the housing, it's one whole unit, and I very much doubt the build would be that drastically different for the white SGS2.
Some things to note:
Be very careful removing the vibrate motor, the connector and natural pivot point is the weakest part (new module ordered from ebay
If you are transplanting the screen like me, have some adhesive pads in your kit as most tutorials are for new screens, and as can be seen on the vid, these come with pads intact, ready to apply
Try do it in daylight
Hope that helps anyone in a similar situation.
vyks10 said:
Appreciate it's been a while, but this seems to be the only post that matches what happened to me, so figured I'd update with my experience.
As above, dropped and dented the bezel, screen was perfectly intact, but the dent was so severe, it actually lifted a corner of my screen up. I have intentions to sell on so I wanted to fix this and pass on.
I followed this disassembly , apart from the bit about not worrying about damaging the screen as you prise it away. The housing I ordered off ebay came with a little kit, so I warmed the screen with hairdryer for a couple of minutes, then slowly prised it away, from top to bottom, inserting the tool right down the middle as the video mentions there is a large adhesive right down the middle.
Following the vid all the way to the removal of all components, this is where I ditched my current bezel/housing and reassembled into the newly ordered one. Judging by the assembly, there is no way that a bezel could be replaced without replacing the housing, it's one whole unit, and I very much doubt the build would be that drastically different for the white SGS2.
Some things to note:
Be very careful removing the vibrate motor, the connector and natural pivot point is the weakest part (new module ordered from ebay
If you are transplanting the screen like me, have some adhesive pads in your kit as most tutorials are for new screens, and as can be seen on the vid, these come with pads intact, ready to apply
Try do it in daylight
Hope that helps anyone in a similar situation.
Click to expand...
Click to collapse
Hi, will the heat actually damage the screen? I saw some posts mentioning about putting it into the oven and such. It sounded very intense but if it works without damaging the screen, i might give it a try. Facing the same situation as yours. Scratches and dents all over my front chrome bezel.
So I managed to shatter the glass on my rezound....go me. I was wondering if anybody here has replaced the screen on the rezound and how hard it is to do. I didn't find a lot of rezound tear down info out there. I do a lot of laptop work and it seems like simular construction techniques. the only thing that has me a bit concerned is the whole adhesive issue. Using a heat gun to get the old screen off and I guess the new one will either adhere to the old adhesive or I need to find a source??
Anyway they appear to be 50 dollars for the part versus 100-150 to send the phone off to have someone else do it. Any thoughts???
While I haven't done the rezound yet, I have done a few others, the most recent being a Droid X. I ordered the 'official' advesive on the first phone screen repair I did but never again. It was hard to deal with...if you don't get it right perfectly the first time... you're done. I went with a 3M double sided foam tape after that and was SO much easir to deal with. Never had a screen pop off and anything like that. My wife is still using that phone as we speak.
Next biggest thing to watch out for is tearing those damn thin cables.... they tear so easy...seriously, do not use any sort of tension on those cables. One little tear could out your camera, or soft keys... or even portions of your digitizer. Such a pain in the ass.
Take care while dis & re assemb ling it, you should be fine. It's a lot more delicate than a laptop, so be careful.
I have never replaced the screen on my Rezound, but I have done a few other phones. My wife dropped her Dinc and broke the screen, then the digitizer went out on my OG DROID. If the Rezound is built like the Dinc then you will be golden. Took only about 20 minutes. But as stated above you MUST be very careful when disassembling the phone. The micro ribbons are a little forgiving but are pretty delicate.
Good luck though and let us know how it works out for you.
Sent from my ADR6425LVW using xda premium
Well I opted to get it replaced mainly because I found a local place that could do it and had the part in stock. However the one they installed has clear buttons instead of red, which I like more but I think its best to stay with the way it is suppose to look. Also there is a small black line that they think might be a smug. They are looking for a screen with the factory red buttons. The question I have is I noticed this digitizer registers 4 points and I thought the rezound did 5 can someone verify how many points of touch its suppose to recognize?
kappen said:
Well I opted to get it replaced mainly because I found a local place that could do it and had the part in stock. However the one they installed has clear buttons instead of red, which I like more but I think its best to stay with the way it is suppose to look. Also there is a small black line that they think might be a smug. They are looking for a screen with the factory red buttons. The question I have is I noticed this digitizer registers 4 points and I thought the rezound did 5 can someone verify how many points of touch its suppose to recognize?
Click to expand...
Click to collapse
My rezound i got from verizon refurb only has 4 input.
my rezound has always only had 4 points
Thanks for the replies.
Hey there, here is an image of my gf's phone (my old one!) which i recently dropped quite hard onto concrete from about 4ft high. As you can see it's slowly dying, the pink-ish band has been coming down gradually over the past 24 hours.
My plan is to find a replacement LCD/digitiser screen and fit it to the phone. Will I need a new glass cover also? Has anyone else ever seen this and successfully repaired it?
Thanks!
weezul said:
Hey there, here is an image of my gf's phone (my old one!) which i recently dropped quite hard onto concrete from about 4ft high. As you can see it's slowly dying, the pink-ish band has been coming down gradually over the past 24 hours.
My plan is to find a replacement LCD/digitiser screen and fit it to the phone. Will I need a new glass cover also? Has anyone else ever seen this and successfully repaired it?
Thanks!
Click to expand...
Click to collapse
If I'm correct is a screen problem
Definitely the digitizer.....
that is broken. Bought a replacement on ebay, about 100 dollars. Came as one unit, front w/glass, digitizer and connector tool and screwdriver. Fairly easy to replace. Look at youtube videos. That helps.
Be sure you get the right one. My softkeys are erratic at times. Might be the versoin that is wrong.
Any confirmation om that will be appriciated w or wo any hints to correct that.
thanks guys, gonna look for a kit now. Does anyone know if I can buy a second phone with for example, bad motherboard, and lift the whole screen and stuff from that one?
my pack arrived today, but there's a big plastic thing same shape as the screen, but like a big sticker with different cut outs. Is this the digitizer? Do I have to break open the fresh front panel? All the guides I've seen suggest otherwise, but I can't figure out for the life of me where it goes :/
just in case anyone was wondering... i never used the sticker thing. I followed iFixit directions and the phone is good as new. a snazzy white/blue hybrid!
Nooooo!!!!
I have only had my phone for 2 weeks and I was sitting outside of Starbucks with my phone on my lap, and this yellow jacket bee kept flying around me. So I stood up to get away from it, while forgetting my phone was on my lap. CRASH! My V30 without a case falls off my lap about 20 inches down onto the cement.
It caused a small spider web crack in the corner of the back glass. One of then cracks extends to the camera lens area. On thr bright side the screen is fine and the camera lens is fine with no cracks. Plus its only mostly the corner thats cracked on the back. But still, it really really sucks since I just got this phone.
I know some of you are thinking I was stupid for not having a case. Maybe so, but keep in mind I pretty much never had cases on my 6P or my S7 Edge. I only dropped my 6P once real bad on a hard surface (fell out of pants with a smaller pocket while sitting) which only left a scuff on the edge with the display fine, and never once dropped my S7 on a hard surface in over a year with it. So I have always been super careful with my phones. Never dropping my phone in years that was a result of my clumsiness or carless.
I guess its just a matter of time though no matter how careful you are handling your phone. Its bound to fall somehow when its not your fault. Like sliding off a slippery surface, falling out of a small pocket, or similar. Anyways I called a local phone repair shop and the good news is the back glass is only $70-$75.
I don't think I am going to get it done just yet since the display is fine, camera lens is fine, and its only the corner of the back. But I probably will eventually before I resell the phone in 1-2 years. Anyways kind of disappointed a military certified phone cracked for such short fall. This is why I prefer metal backed phones so much more. Anyways hopefully this info of how easy it cracks and the cost to replace the back out there being pretty cheap helps some others out there.
*Puts case back on my V30*
Yeah, I watched a couple of videos on what happens to GG 4 & 5 with drop tests and decided mine would stay in a case. Added bonus of keeping finger prints off of the actual phone back and just on a plastic case.
I have several cases I've bought to put on my LG V30 when I actually buy the phone. You can buy very good cases for even a couple of dollars on ebay. I started the LG V30 cases thread, because most people don't know that.
You can even buy clear cases if you still want to show off the phone.
Cases for LG V30
https://forum.xda-developers.com/lg-v30/accessories/lg-v30-t3667430
Just putting that out there for people who still need a case. At those prices, order 2 or 3!
ChazzMatt said:
You can even buy clear cases if you still want to show off the phone.
Cases for LG V30
https://forum.xda-developers.com/lg-v30/accessories/lg-v30-t3667430
Just putting that out there for people who still need a case. At those prices, order 2 or 3!
Click to expand...
Click to collapse
Yeah I already have a case, I just didn't have it on because I don't really like having one. I got it on now though. Ita a slim fitting case by Lumion. I never heard of this case company before but I really like it. I'm probably going to give the Spigen Crystal case a try too.
AndroidPurity said:
Yeah I already have a case, I just didn't have it on because I don't really like having one. I got it on now though. Ita a slim fitting case by Lumion. I never heard of this case company before but I really like it. I'm probably going to give the Spigen Crystal case a try too.
Click to expand...
Click to collapse
I'm very sorry for your accident. Ugh.
At least you know it can be repaired easily.
If the glass is still smooth, you can always put a skin over it.
This is one concern causing me pause in my purchase. Why there can't be a nice carbon fiber replacement back for this phone, I don't know. Motorola had a good idea going with the "design your own phone" during the Droid Turbo / Turbo 2 days, they just gave up on it too early.
Nay Tyzon said:
This is one concern causing me pause in my purchase. Why there can't be a nice carbon fiber replacement back for this phone, I don't know
Click to expand...
Click to collapse
b'cause it's not waterproof, or your can't glue it like glass
Billy Madison said:
b'cause it's not waterproof, or your can't glue it like glass
Click to expand...
Click to collapse
That's the beauty of carbon fiber composites. The resin it's molded in is waterproof, gluing is about the only way to attach it to anything, it can be built up as thick as needed to create a reliable sealing edge or stiffness to the back. And it's radio transparent, so no issue with wireless charging. It can be textured, to make it more grippy.
The ccf aesthetic isn't for everyone, I get that, but it would be great as an option, and would be completely workable.
That is a bummer that it cracked. I am super impressed by the strength of this device though, my embarrassing story about it. Bought a new TV for my living room, decided I needed to take my old TV down to the basement and thought I could wrangle the 60" TV by myself, took two steps down and slipped, fell super hard all the way down the stairs with my phone in my back pocket. Huge bruises on my back, butt, arm and legs, the phone I was positive was a goner. Took it out of the case and to my amazement not a scratch and the glass looks perfect, however there is a size-able dent on one side of the phone and it is pushing the screen out. Everything works perfect and like I said, it did not crack at all, I am not a small guy, between me and the TV it took a 300 lb hit on the edge of a step and then several more hits down the stairs.
Of course I went to T-Mobile and they laughed and said "We can't take a bent phone back" luckily I am still in the 14 days grace period and will be adding insurance so I can get a replacement. It works, but is a little annoying to use this way. And to end the story on a high note, I did save the TV, did not let go of it!
Circledog said:
That is a bummer that it cracked. I am super impressed by the strength of this device though, my embarrassing story about it. Bought a new TV for my living room, decided I needed to take my old TV down to the basement and thought I could wrangle the 60" TV by myself, took two steps down and slipped, fell super hard all the way down the stairs with my phone in my back pocket. Huge bruises on my back, butt, arm and legs, the phone I was positive was a goner. Took it out of the case and to my amazement not a scratch and the glass looks perfect, however there is a size-able dent on one side of the phone and it is pushing the screen out. Everything works perfect and like I said, it did not crack at all, I am not a small guy, between me and the TV it took a 300 lb hit on the edge of a step and then several more hits down the stairs.
Of course I went to T-Mobile and they laughed and said "We can't take a bent phone back" luckily I am still in the 14 days grace period and will be adding insurance so I can get a replacement. It works, but is a little annoying to use this way. And to end the story on a high note, I did save the TV, did not let go of it!
Click to expand...
Click to collapse
A quick and healthy recovery!
My wife had dropped her v30 TWICE already in a week... Both times it luckily hit a corner and no glass cracked or scratched. Just a scuff on the metal of each bottom corner. So damn lucky with that so far... her case finally showed up the day after the second drop.
AndroidPurity said:
Nooooo!!!!
I have only had my phone for 2 weeks and I was sitting outside of Starbucks with my phone on my lap, and this yellow jacket bee kept flying around me. So I stood up to get away from it, while forgetting my phone was on my lap. CRASH! My V30 without a case falls off my lap about 20 inches down onto the cement.
It caused a small spider web crack in the corner of the back glass. One of then cracks extends to the camera lens area. On thr bright side the screen is fine and the camera lens is fine with no cracks. Plus its only mostly the corner thats cracked on the back. But still, it really really sucks since I just got this phone.
I know some of you are thinking I was stupid for not having a case. Maybe so, but keep in mind I pretty much never had cases on my 6P or my S7 Edge. I only dropped my 6P once real bad on a hard surface (fell out of pants with a smaller pocket while sitting) which only left a scuff on the edge with the display fine, and never once dropped my S7 on a hard surface in over a year with it. So I have always been super careful with my phones. Never dropping my phone in years that was a result of my clumsiness or carless.
I guess its just a matter of time though no matter how careful you are handling your phone. Its bound to fall somehow when its not your fault. Like sliding off a slippery surface, falling out of a small pocket, or similar. Anyways I called a local phone repair shop and the good news is the back glass is only $70-$75.
I don't think I am going to get it done just yet since the display is fine, camera lens is fine, and its only the corner of the back. But I probably will eventually before I resell the phone in 1-2 years. Anyways kind of disappointed a military certified phone cracked for such short fall. This is why I prefer metal backed phones so much more. Anyways hopefully this info of how easy it cracks and the cost to replace the back out there being pretty cheap helps some others out there.
*Puts case back on my V30*
Click to expand...
Click to collapse
Sorry to hear that. I couldn't stand using a cracked phone so I really feel ya.
Good luck with the repairs!
Sent from my LG-H932 using Tapatalk
NeutronBomb said:
My wife had dropped her v30 TWICE already in a week... Both times it luckily hit a corner and no glass cracked or scratched. Just a scuff on the metal of each bottom corner. So damn lucky with that so far... her case finally showed up the day after the second drop.
Click to expand...
Click to collapse
Whyyyy couldn't have mine done that?!
Actually I think the sides of this phone are super reinforced. Way more than more glass phones. I think mine just fell at the absolute worst angle that hit it just right. Just thankfully it was not the display!
psawjack said:
Sorry to hear that. I couldn't stand using a cracked phone so I really feel ya.
Good luck with the repairs!
Click to expand...
Click to collapse
Thanks! I also found the glass back is on Ebay for only about $18 and comes with the little tool to replace it. So I might just do that myself. I watched a video of how to take the back off.
I only have 2 worries if I do it myself.
1.) Making sure the new glass back seals on tight enough still be at least mostly water proof and
2.) Removing the finger print sensor from the old back to the new back. The video I watched doesnt show how to remove the finger print sensor. But once I find a video on someone removing and reattaching the finger print sensor, then I will pull the trigger for the $18 glass back.
So much for military certified durability :laugh: :crying:
Also you'll lose the ip68 rating by replacing that yourself most lowly just a heads up. Watch the video of Jerry rig everything. When he made a clear v30. Really good on how to open phone
Happened to one of the phones on my account. Fell about 3 feet on a wood floor and the back has a hairline crack. I'll skin it, put it in a case and be done with it.
Circledog said:
.......Of course I went to T-Mobile and they laughed and said "We can't take a bent phone back" luckily I am still in the 14 days grace period and will be adding insurance so I can get a replacement. It works, but is a little annoying to use this way. And to end the story on a high note, I did save the TV, did not let go of it!
Click to expand...
Click to collapse
That's quite a story! That should be in a V30 durability ad. Opening shot of the big dent and bulged screen with the phone speaking in "android voice" saying, "yeah, I took quite a beating, but you should see the other guy!" Then a fade in shot of you looking all sheepish and bruised from head to toe with a final fade out slow-mo reenactment of the fateful tussle.
stuartmc said:
That's quite a story! That should be in a V30 durability ad. Opening shot of the big dent and bulged screen with the phone speaking in "android voice" saying, "yeah, I took quite a beating, but you should see the other guy!" Then a fade in shot of you looking all sheepish and bruised from head to toe with a final fade out slow-mo reenactment of the fateful tussle.
Click to expand...
Click to collapse
Lol, love it, I will have to email LG!
Circledog said:
Lol, love it, I will have to email LG!
Click to expand...
Click to collapse
Do it! This is too good to pass over.