Hello, im in terrible situation, my huawei y300-0100 is stucked in bootloader, i can access the recovery but it doesnt flash any firmware that i tried . including 175 and 189 general firmware. i knew the bootloader is locked so i requested the unlock code from huawei but in fastboot oem unlock code restarts the mobile and it gets stucked in tho the bootloader again.
the emmc is readonly and hence cant update. please tell me what to do.
is there a way to flash the firmware by adb, ? the adb , fastboot and sideload all are working but it doesnt write any changes to the emmc.
if the post is in wrong category please forgive me, although i have been a regular user , this is my first post.
Thank you , any help is appreciated.
Hello , I need your help , I have a Moto Maxx ( xt1225 ) was using the RR 5.1.1 Rom , just not liking it and doing Downgrade for kit kat , but I knew I could not have the First two commands rom because the device would go into brick , through a tutorial to follow here on the site managed to put it in the fastboot screen but he says that with the locked bootloader and does not accept nor a command that I try to send it recognizes the mfastboot devices command but the error trying to send the rom commands or do the bootloader unlock again , wanted to know if my case is hopeless , if I really have to send switch the device board
I wish I could send a picture of how the device is but I am unable to post links
Good Morning Guys,
I've totally bricked my phone, nothing is working on it, Bootloader in locked, FRP is locked, flashed even VIP stock roms yet nothing changed.
Installed DC Unlocker, said that it's finished the job but still nothing happens.
So the only remaining solution for me is to OPEN UP the hardware and try to flash the QUALCOMM processor itself.
Is there any guide for that?
Also do I need a special stock rom to install to the GR5 Kii-l21?
Please help.. ty
Hi Team,
I know that VIVO Y51L running on PD1510F_EX_C bootloader can be unlocked using "fastboot bbk unlock_vivo" which was worked for me.
But When I downgraded to PD1510F_EX_A using QFIL tool some bad things happened as below since I used "rawprogram_unsparse" rather than "rawprogram_unsparse_no_qcn"
1.Wifi/Mac Address gone
2.IMEI gone
3.Sim is not detecting
4. by Power off and Volume + & - button in QFIL PORT is not getting detected but enters into Fastboot mode.
So How to Flash Stock rom again to recover everything using QFIL (Port cannot detect) ?
Is there anyway to unlock bootloader in PD1510F_EX_A version (Android 5.0.2) ?
Thanks,
Ramesh Selvam
rameshemessage said:
Hi Team,
I know that VIVO Y51L running on PD1510F_EX_C bootloader can be unlocked using "fastboot bbk unlock_vivo" which was worked for me.
But When I downgraded to PD1510F_EX_A using QFIL tool some bad things happened as below since I used "rawprogram_unsparse" rather than "rawprogram_unsparse_no_qcn"
1.Wifi/Mac Address gone
2.IMEI gone
3.Sim is not detecting
4. by Power off and Volume + & - button in QFIL PORT is not getting detected but enters into Fastboot mode.
So How to Flash Stock rom again to recover everything using QFIL (Port cannot detect) ?
Is there anyway to unlock bootloader in PD1510F_EX_A version (Android 5.0.2) ?
Thanks,
Ramesh Selvam
Click to expand...
Click to collapse
Hello Ramesh
Contact me on telegram for issue KumarAyush2104
rameshemessage said:
Hi Team,
I know that VIVO Y51L running on PD1510F_EX_C bootloader can be unlocked using "fastboot bbk unlock_vivo" which was worked for me.
But When I downgraded to PD1510F_EX_A using QFIL tool some bad things happened as below since I used "rawprogram_unsparse" rather than "rawprogram_unsparse_no_qcn"
1.Wifi/Mac Address gone
2.IMEI gone
3.Sim is not detecting
4. by Power off and Volume + & - button in QFIL PORT is not getting detected but enters into Fastboot mode.
So How to Flash Stock rom again to recover everything using QFIL (Port cannot detect) ?
Is there anyway to unlock bootloader in PD1510F_EX_A version (Android 5.0.2) ?
Thanks,
Ramesh Selvam
Click to expand...
Click to collapse
Hi Ramesh..
Im facing the same probem.
Did you find the solution to our problem yet?
teruna89 said:
Hi Ramesh..
Im facing the same probem.
Did you find the solution to our problem yet?
Click to expand...
Click to collapse
Contact me on telegram @KumarAyush2104
what i do sir please tell me
Long short story(unlocked the bootloader,installed TWRP+magisk,damaged boot,bootloop,relocked bootloader ), i hard bricked my PCCM00 10x zoom, no stock recovery, locked bootloader and the bootloop with "The current image (boot/recovery) has been destroyed,please flash the correct image..)
I can only access the phone in EDL mode, in device manager appears unde com4 port - Qualcomm HS-USB QDloader 9008 (COM4).The only problem is , after decrypting the .ozip firmware from Oppo , i'm not finding the required files for flashing the phone with Qfil flashing tool from Qualcomm.(rawprogram,patch xml files and that .mbn firmware file).It s possible to generate those files from my actual firmware of i need another different chinese firmware archive with ColorOS .
Thank you
mura69 said:
Long short story, i hard bricked my PCCM00 10x zoom, no stock recovery, locked bootloader and the bootloop with "The current image (boot/recovery) has been destroyed,please flash the correct image..)
I can only access the phone in EDL mode, in device manager appears unde com4 port - Qualcomm HS-USB QDloader 9008 (COM4).The only problem is , after decrypting the .ozip firmware from Oppo , i'm not finding the required files for flashing the phone with Qfil flashing tool from Qualcomm.(rawprogram,patch xml files and that .mbn firmware file).It s possible to generate those files from my actual firmware of i need another different chinese firmware archive with ColorOS .
Thank you
Click to expand...
Click to collapse
I would recommend taking your device to your nearest Oppo service centre
moozer said:
I would recommend taking your device to your nearest Oppo service centre
Click to expand...
Click to collapse
Thank you, but Europe is in lockdown and beside that , global Oppo doesn't want to help me because is a chinese model, so the nearest Oppo service that can help me would be in China
mura69 said:
Thank you, but Europe is in lockdown and beside that , global Oppo doesn't want to help me because is a chinese model, so the nearest Oppo service that can help me would be in China
Click to expand...
Click to collapse
Ah okay. Sorry to hear that. Can I ask...why did you relock the bootloader? Surely that's the issue
moozer said:
Ah okay. Sorry to hear that. Can I ask...why did you relock the bootloader? Surely that's the issue
Click to expand...
Click to collapse
Well,i couldn't flash the stock firmware from the stock recovery because of the unlocked bootloader.The browse option in sdcard was grayout and wifi search was not working.
mura69 said:
Long short story(unlocked the bootloader,installed TWRP+magisk,damaged boot,bootloop,relocked bootloader ), i hard bricked my PCCM00 10x zoom, no stock recovery, locked bootloader and the bootloop with "The current image (boot/recovery) has been destroyed,please flash the correct image..)
I can only access the phone in EDL mode, in device manager appears unde com4 port - Qualcomm HS-USB QDloader 9008 (COM4).The only problem is , after decrypting the .ozip firmware from Oppo , i'm not finding the required files for flashing the phone with Qfil flashing tool from Qualcomm.(rawprogram,patch xml files and that .mbn firmware file).It s possible to generate those files from my actual firmware of i need another different chinese firmware archive with ColorOS .
Thank you
Click to expand...
Click to collapse
Is this of any use?
https://romprovider.com/2019/12/android-10-opo-reno-10x-zoom/
Hello,
I have the same problem! Have you found a solution?
You are going through which software for the flash?
Have you found a solution?
mura69 said:
Long short story(unlocked the bootloader,installed TWRP+magisk,damaged boot,bootloop,relocked bootloader ), i hard bricked my PCCM00 10x zoom, no stock recovery, locked bootloader and the bootloop with "The current image (boot/recovery) has been destroyed,please flash the correct image..)
I can only access the phone in EDL mode, in device manager appears unde com4 port - Qualcomm HS-USB QDloader 9008 (COM4).The only problem is , after decrypting the .ozip firmware from Oppo , i'm not finding the required files for flashing the phone with Qfil flashing tool from Qualcomm.(rawprogram,patch xml files and that .mbn firmware file).It s possible to generate those files from my actual firmware of i need another different chinese firmware archive with ColorOS .
Thank you
Click to expand...
Click to collapse
Hello,
I have the same problem! Have you found a solution?
You are going through which software for the flash?
mura69 said:
Well,i couldn't flash the stock firmware from the stock recovery because of the unlocked bootloader.The browse option in sdcard was grayout and wifi search was not working.
Click to expand...
Click to collapse
Hey did you get it fixed in the end?
I didn t , i just sold it to a guy who could reflash the chip of the phone . Was my first/last oppo , never again . Still good luck with it !